* tag 'renesas-defconfig-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: kzm9g: enable AS3711 PMIC in defconfig
ARM: shmobile: bockw: enable USB in defconfig
ARM: shmobile: bockw: enable CONFIG_PM_RUNTIME in defconfig
ARM: shmobile: bockw: enable I2C in defconfig
ARM: shmobile: bockw: enable SDHI on defconfig
ARM: shmobile: armadillo800eva: Fix maximum number of SCIF
Olof Johansson [Tue, 11 Jun 2013 04:42:48 +0000 (21:42 -0700)]
Merge branch 'next/dt' into for-next
* next/dt:
ARM: Kirkwood add cpus definition needed by cpufreq driver to dtsi
ARM: kirkwood: add i2c-gpio controller for km_kirkwood
ARM: kirkwood: refactor dtsi to largest common nodes
Signed-off-by: Olof Johansson <olof@lixom.net>
Conflicts:
arch/arm/boot/dts/kirkwood-6281.dtsi
Olof Johansson [Tue, 11 Jun 2013 04:39:37 +0000 (21:39 -0700)]
Merge tag 'dt-3.11-4' of git://git.infradead.org/users/jcooper/linux into next/dt
From Jason Cooper:
mvebu dt changes for v3.11 (round 4)
- kirkwood
- reshuffle nodes from kirkwood.dtsi to -6281.dtsi, etc
- add i2c-gpio for km_kirkwood
- add cpu node so pending cpufreq driver will init
* tag 'dt-3.11-4' of git://git.infradead.org/users/jcooper/linux:
ARM: Kirkwood add cpus definition needed by cpufreq driver to dtsi
ARM: kirkwood: add i2c-gpio controller for km_kirkwood
ARM: kirkwood: refactor dtsi to largest common nodes
Arnd Bergmann [Mon, 10 Jun 2013 14:48:36 +0000 (16:48 +0200)]
ARM: dts: add missing cpu #address-cell values
A recent series has added CPU numbers to a lot of dts files,
but unfortunately in a few cases the #address-cells
and #size-cells values are missing, which causes build warnings.
This adds the missing ones for sunxi and sama5 that I found
through build testing.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Olof Johansson [Sun, 9 Jun 2013 05:31:06 +0000 (22:31 -0700)]
Merge branch 'next/fixes-non-critical' into for-next
* next/fixes-non-critical:
arm: prima2: use of_platform_populate instead of of_platform_bus_probe
ARM: prima2: fix a checkpatch issue
ARM: prima2: Replace include linux/module.h with linux/export.h
Olof Johansson [Sun, 9 Jun 2013 05:30:28 +0000 (22:30 -0700)]
Merge tag 'sirf-arm-soc-v3.10-fixes' of git://gitorious.org/sirfprima2-kernel/sirfprima2-kernel into next/fixes-non-critical
From Barry Song, SiRF fixes for v3.10 (that we're punting to 3.11):
- Replace include linux/module.h with linux/export.h
- fix a checkpatch issue
- use of_platform_populate instead of of_platform_bus_probe
* tag 'sirf-arm-soc-v3.10-fixes' of git://gitorious.org/sirfprima2-kernel/sirfprima2-kernel:
arm: prima2: use of_platform_populate instead of of_platform_bus_probe
ARM: prima2: fix a checkpatch issue
ARM: prima2: Replace include linux/module.h with linux/export.h
+ Linux 3.10-rc4
Olof Johansson [Sat, 8 Jun 2013 01:20:26 +0000 (18:20 -0700)]
Merge branch 'fixes' into for-next
* fixes:
ARM: exynos: add debug_ll_io_init() call in exynos_init_io()
ARM: EXYNOS: uncompress - print debug messages if DEBUG_LL is defined
ARM: shmobile: sh73a0: Update CMT clockevent rating to 80
sh-pfc: r8a7779: Don't group USB OVC and PENC pins
ARM: mxs: icoll: Fix interrupts gpio bank 0
ARM: imx: clk-imx6q: AXI clock select index is incorrect
ARM: dts: imx: fix clocks for cspi
ARM i.MX6q: fix for ldb_di_sels
Olof Johansson [Sat, 8 Jun 2013 01:19:30 +0000 (18:19 -0700)]
Merge tag 'mxs-fixes-3.10' of git://git.linaro.org/people/shawnguo/linux-2.6 into fixes
From Shawn Guo, mxs fixes for 3.10:
- Since the time we move to MULTI_IRQ_HANDLER, the 0x7f polling for no
interrupt in icoll_handle_irq() becomes insane, because 0x7f is an
valid interrupt number, the irq of gpio bank 0. That unnecessary
polling results in the driver not detecting when irq 0x7f is active
which makes the machine effectively dead lock. The fix removes the
interrupt poll loop and allows usage of gpio0 interrupt without an
infinite loop.
* tag 'mxs-fixes-3.10' of git://git.linaro.org/people/shawnguo/linux-2.6:
ARM: mxs: icoll: Fix interrupts gpio bank 0
Olof Johansson [Sat, 8 Jun 2013 01:18:08 +0000 (18:18 -0700)]
Merge tag 'imx-fixes-3.10-2' of git://git.linaro.org/people/shawnguo/linux-2.6 into fixes
From Shawn Guo, imx fixes for 3.10, take 2:
- One device tree fix for all spi node to have per clock added.
The clock is needed by spi driver to calculate bit rate divisor.
The spi node in the current device trees either does not have the
clock or is defined as dummy clock, in which case the driver probe
will fail or spi will run at a wrong bit rate.
- Two imx6q clock fixes, which correct axi_sels and ldb_di_sels.
* tag 'imx-fixes-3.10-2' of git://git.linaro.org/people/shawnguo/linux-2.6:
ARM: imx: clk-imx6q: AXI clock select index is incorrect
ARM: dts: imx: fix clocks for cspi
ARM i.MX6q: fix for ldb_di_sels
Doug Anderson [Wed, 5 Jun 2013 20:56:33 +0000 (13:56 -0700)]
ARM: exynos: add debug_ll_io_init() call in exynos_init_io()
If the early MMU mapping of the UART happens to get booted out of the
TLB between the start of paging_init() and when we finally re-add the
UART at the very end of s3c_init_cpu(), we'll get a hang at bootup if
we've got early_printk enabled. Avoid this hang by calling
debug_ll_io_init() early.
Without this patch, you can reliably reproduce a hang when early
printk is enabled by adding flush_tlb_all() at the start of
exynos_init_io(). After this patch the hang goes away.
Signed-off-by: Doug Anderson <dianders@chromium.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sat, 8 Jun 2013 01:10:42 +0000 (18:10 -0700)]
Merge tag 'renesas-fixes-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes
From Simon Horman, Renesas ARM based SoC fixes for v3.10:
- Correction to USB OVC and PENC pin groupings on r8a7779 SoC.
This avoids conflicts when the USB_OVCn pins are used by another function.
This has been observed to be a problem in v3.10-rc1.
- Update CMT clock rating for sh73a0 SoC to resolve boot failure
on kzm9g-reference. This resolves a regression between v3.9 and v3.10-rc1.
* tag 'renesas-fixes-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: sh73a0: Update CMT clockevent rating to 80
sh-pfc: r8a7779: Don't group USB OVC and PENC pins
Tushar Behera [Tue, 4 Jun 2013 04:19:10 +0000 (09:49 +0530)]
ARM: EXYNOS: uncompress - print debug messages if DEBUG_LL is defined
Printing low-level debug messages make an assumption that the specified
UART port has been preconfigured by the bootloader. Incorrectly
specified UART port results in system getting stalled while printing the
message "Uncompressing Linux... done, booting the kernel"
This UART port number is specified through S3C_LOWLEVEL_UART_PORT. Since
the UART port might different for different board, it is not possible to
specify it correctly for every board that use a common defconfig file.
Calling this print subroutine only when DEBUG_LL fixes the problem. By
disabling DEBUG_LL in default config file, we would be able to boot
multiple boards with different default UART ports.
With this current approach, we miss the print "Uncompressing Linux...
done, booting the kernel." when DEBUG_LL is not defined.
Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sat, 8 Jun 2013 00:51:39 +0000 (17:51 -0700)]
Merge tag 'vt8500/dts-3.11' of git://github.com/linux-wmt/linux-vtwm into next/dt
From Tony Prisk, vt8500 devicetree updates for 3.11.
* tag 'vt8500/dts-3.11' of git://github.com/linux-wmt/linux-vtwm:
dts: vt8500: Correct reference clock on WM8850 SoCs
dts: vt8500: Add ARM, AHB, APB and DDR clock nodes to SoC files
dts: vt8500: Populate missing PLL nodes
dts: clk: vt8500: Update SoC dtsi to use WM8850 PLL clocks
dts: vt8500: Update serial nodes and disable by default in SoC files
dts: vt8500: Add devicetree support for WM8750 SoC and APC8750 board
dts: vt8500: Fix invalid/missing cpu nodes for soc files.
Tony Lindgren [Fri, 7 Jun 2013 22:06:18 +0000 (15:06 -0700)]
Merge tag 'omap-fixes-b-for-3.10-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into omap-for-v3.10/fixes
More OMAP hwmod and clock fixes for v3.10-rc. Fixes the AM33xx UART2.
Also fixes some CCF-related breakage on OMAP36xx/37xx, affecting DSS
at the very least.
ARM: omap3: clock: fix wrong container_of in clock36xx.c
omap36xx_pwrdn_clk_enable_with_hsdiv_restore expects the parent hw of
the clock to be a clk_hw_omap. However, looking at cclock3xxx_data.c,
all concerned clock have parent defined as clk_divider. Fix the
function to use clk_divider. Tested with 3.9 on dm3730.
Signed-off-by: Jean-Philippe François <jp.francois@cynove.com> Cc: NeilBrown <neilb@suse.de> Cc: Mike Turquette <mturquette@linaro.org> Signed-off-by: Paul Walmsley <paul@pwsan.com>
Vladimir Barinov [Tue, 16 Apr 2013 23:03:45 +0000 (03:03 +0400)]
ARM: shmobile: bockw: enable CONFIG_PM_RUNTIME in defconfig
Enable CONFIG_PM_RUNTIME in 'bockw_defconfig' -- it's already used by TMU, SCI,
I2C, and Ether drivers to control the clocks...
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Simon Horman [Wed, 22 May 2013 10:47:05 +0000 (19:47 +0900)]
ARM: shmobile: sh73a0: Update CMT clockevent rating to 80
Update the CMT clockevent rating from 125 to 80.
This resolves a boot-failure regression for kzm9g-reference in v3.10-rc1
introduced by f7db706b132f11c79ae1d74b2382e0926cf31644 ("ARM: 7674/1: smp:
Avoid dummy clockevent being preferred over real").
The patch noted above reduces the rating of dummy clockevent from 400 to 100.
This patch reduces the rating of CMT so that it is once again less than that
of the dummy clockevent.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Tue, 21 May 2013 10:39:31 +0000 (12:39 +0200)]
sh-pfc: r8a7779: Don't group USB OVC and PENC pins
The USB_OVCn pins are alternate options for USB over-current detection
when using a 3.3V USB interface. As they're not mandatory they can be
used independently of the USB PENC pins. Don't group the USB_OVCn and
PENC pins to avoid conflicts when the USB_OVCn pins are used by another
function.
Reported-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Adam Baker [Sun, 2 Jun 2013 21:59:50 +0000 (22:59 +0100)]
ARM: Kirkwood add cpus definition needed by cpufreq driver to dtsi
The Kirkwood CPU Freq driver needs a CPU definition in order for the probe
routine to activate it. Add a suitable definition to kirkwood.dtsi
This definition is only correct for single core SoCs. There is a dual core
SoC in the kirkwood family (88F632X) but the rest of the Kirkwood drivers in
the kernel don't currently support it. If they ever do the cpus definition
would need to be duplicated in each of the SoC specific include files.
Signed-off-by: Adam Baker <linux@baker-net.org.uk> Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Markus Pargmann [Tue, 28 May 2013 15:00:57 +0000 (17:00 +0200)]
ARM: mxs: icoll: Fix interrupts gpio bank 0
The mxs interrupt controller does not support polling for interrupts,
but the driver still does it, which is a relict from
pre-MULTI_IRQ_HANDLER times.
The existing code assumes that 0x7f means no interrupt, but this value
is an actually valid irq number, namely gpio bank 0's irq. This results
in the driver not detecting when irq 0x7f is active which makes the
machine effectively dead lock.
This patch removes the interrupt poll loop and allows usage of gpio0
interrupt without an infinite loop.
Arnd Bergmann [Mon, 3 Jun 2013 13:15:36 +0000 (15:15 +0200)]
drivers/bus: arm-cci: fix combined ARMv6+v7 build
When we build a kernel with support for both ARMv6 and ARMv7,
gas is trying to be helpful by pointing out that the arm-cci
driver would not work on ARMv6:
/tmp/ccu1LDeU.s: Assembler messages:
/tmp/ccu1LDeU.s:450: Error: selected processor does not support ARM mode `wfi '
/tmp/ccu1LDeU.s:451: Error: selected processor does not support ARM mode `wfe '
make[4]: *** [drivers/bus/arm-cci.o] Error 1
We know that the driver will only be used on ARMv7, hence we
can annotate the inline assembly listing to allow those instructions.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Nicolas Pitre <nico@linaro.org> Cc: Dave Martin <dave.martin@linaro.org>
Suman Anna [Wed, 17 Apr 2013 23:23:15 +0000 (18:23 -0500)]
ARM: dts: OMAP5: Fix missing PWM capability to timer nodes
OMAP5 has 6 timers (GPTimers 5, 6, 8 to 11) that are capable of PWM.
The PWM capability property is missing from the node definitions of
couple of timers.
Add ti,timer-pwm attribute for timer 5, 6, 8 and 11.
Signed-off-by: Suman Anna <s-anna@ti.com>
[benoit.cousson@linaro.org: Update changelog and subject to highlight
the fix] Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
Kevin Hilman [Sat, 25 May 2013 00:24:21 +0000 (17:24 -0700)]
ARM: dts: omap4-panda|sdp: Fix mux for twl6030 IRQ pin and msecure line
Earlier commits ensured proper muxing of pins related to proper
TWL6030 behavior: see commit 265a2bc8 (ARM: OMAP3: TWL4030: ensure
sys_nirq1 is mux'd and wakeup enabled) and commit 1ef43369 (ARM:
OMAP4: TWL: mux sys_drm_msecure as output for PMIC).
However these only fixed legacy boot and not DT boot. For DT boot,
the default mux values need to be set properly in DT.
Special thanks to Nishanth Menon for the review and catching some
major flaws in earlier versions.
Tested on OMAP4430/Panda and OMAP4460/Panda-ES.
Cc: Nishanth Menon <nm@ti.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Acked-by: Grygorii Strashko <grygorii.strashko@ti.com>
[benoit.cousson@linaro.org: Slightly change the subject to align
board name with file name] Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
Lars Poeschel [Tue, 28 May 2013 08:24:57 +0000 (10:24 +0200)]
ARM: dts: AM33xx: Fix properties on gpmc node
The gpmc driver is actually looking for "gpmc,num-cs" and
"gpmc,num-waitpins" properties in DT. The binding doc also states
this.
Correct the properties in the dts to provide the right values for the
gpmc driver.
Signed-off-by: Lars Poeschel <poeschel@lemonage.de> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Acked-by: Pekon Gupta <pekon@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
Thomas Petazzoni [Tue, 28 May 2013 15:17:45 +0000 (17:17 +0200)]
arm: omap2: fix AM33xx hwmod infos for UART2
The UART2 hwmod structure is pointing to the EDMA channels of UART1,
which doesn't look right. This patch fixes this by making the UART2
hwmod structure to a new structure that lists the EDMA channels to be
used by the UART2.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Vaibhav Hiremath <hvaibhav@ti.com>
[paul@pwsan.com: updated to apply] Signed-off-by: Paul Walmsley <paul@pwsan.com>
Barry Song [Thu, 16 May 2013 03:26:10 +0000 (11:26 +0800)]
arm: prima2: use of_platform_populate instead of of_platform_bus_probe
use of_platform_populate to populate platform devices, it is suitable
for creating devices which are children of the root node, then makes
things like pcm work.
this patch removes sirfsoc_mach_init() function and lets arm core do
of_platform_populate:
static int __init customize_machine(void)
{
/*
* customizes platform devices, or adds new ones
* On DT based machines, we fall back to populating the
* machine from the device tree, if no callback is provided,
* otherwise we would always need an init_machine callback.
*/
if (machine_desc->init_machine)
machine_desc->init_machine();
else
of_platform_populate(NULL, of_default_bus_match_table,
NULL, NULL);
return 0;
}
Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Rongjun Ying <Rongjun.Ying@csr.com>
Olof Johansson [Sun, 2 Jun 2013 18:59:49 +0000 (11:59 -0700)]
Merge branch 'fixes' into for-next
* fixes: (168 commits)
ARM: bcm2835: override the HW UART periphid
Linux 3.10-rc4
parisc: parport0: fix this legacy no-device port driver!
parport_pc: disable PARPORT_PC_SUPERIO on parisc architecture
parisc/PCI: lba: fix: convert to pci_create_root_bus() for correct root bus resources (v2)
parisc/PCI: Set type for LBA bus_num resource
MAINTAINERS: update parisc architecture file list
parisc: kernel: using strlcpy() instead of strcpy()
parisc: rename "CONFIG_PA7100" to "CONFIG_PA7000"
parisc: fix kernel BUG at arch/parisc/include/asm/mmzone.h:50
parisc: memory overflow, 'name' length is too short for using
powerpc/cputable: Fix typo on P7+ cputable entry
powerpc/perf: Add missing SIER support
powerpc/perf: Revert to original NO_SIPR logic
powerpc/pci: Remove the unused variables in pci_process_bridge_OF_ranges
powerpc/pci: Remove the stale comments of pci_process_bridge_OF_ranges
powerpc/pseries: Always enable CONFIG_HOTPLUG_CPU on PSERIES SMP
powerpc/kvm/book3s: Add support for H_IPOLL and H_XIRR_X in XICS emulation
powerpc/32bit:Store temporary result in r0 instead of r8
powerpc/mm: Always invalidate tlb on hpte invalidate and update
...
Olof Johansson [Sun, 2 Jun 2013 18:50:49 +0000 (11:50 -0700)]
Merge tag 'ux500-arm-soc-v3.10-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into fixes
From Linus Walleij, ux500 fixes for v3.10:
- A multiplatform fix making sure ux500_idle_init() is only executed on ux500.
- A regulator fix making sure the MMC/SD card regulator is not disabled on boot.
Signed-off-by: Olof Johansson <olof@lixom.net>
* tag 'ux500-arm-soc-v3.10-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
ARM: ux500: Provide supplies for AUX1, AUX2 and AUX3
ARM: ux500: Only configure wake-up reasons on ux500 based platforms
Jongsung Kim [Thu, 30 May 2013 04:07:39 +0000 (22:07 -0600)]
ARM: bcm2835: override the HW UART periphid
Stephen Warren reported the recent commit 78506f2 (add support for
extended FIFO-size of PL011-r1p5) breaks the serial port on the
BCM2835 ARM SoC.
A UART compatible with the ARM PL011-r1p5 should have 32-deep FIFOs.
The BCM2835 UART just looks like an ARM PL011-r1p5, but has 16-deep
FIFOs just like PL011-r1p4 or earlier revisions. As a workaround for
this compatibility issue, this patch overrides the HW UART periphid
register values with the actually compatible UART periphid 0x00241011
(r1p3 or r1p4).
Reported-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Jongsung Kim <neidhard.kim@lge.com> Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sat, 1 Jun 2013 05:20:10 +0000 (22:20 -0700)]
Merge tag 'fixes-3.10-3' of git://git.infradead.org/users/jcooper/linux into fixes
From Jason Cooper, mvebu fixes for v3.10 round 3:
- mvebu
- fix bug in coherency fabric low level init
- kirkwood
- fix crash from pcie double init
Signed-off-by: Olof Johansson <olof@lixom.net>
* tag 'fixes-3.10-3' of git://git.infradead.org/users/jcooper/linux:
ARM: mvebu: Fix bug in coherency fabric low level init function
ARM: Kirkwood: TS219: Fix crash by double PCIe instantiation
Linus Torvalds [Sat, 1 Jun 2013 21:24:54 +0000 (06:24 +0900)]
Merge branch 'for-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc fixes from Helge Deller:
"This patcheset includes fixes for:
- the PCI/LBA which brings back the stifb graphics framebuffer
console
- possible memory overflows in parisc kernel init code
- parport support on older GSC machines
- avoids that users by mistake enable PARPORT_PC_SUPERIO on parisc
- MAINTAINERS file list updates for parisc."
* 'for-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: parport0: fix this legacy no-device port driver!
parport_pc: disable PARPORT_PC_SUPERIO on parisc architecture
parisc/PCI: lba: fix: convert to pci_create_root_bus() for correct root bus resources (v2)
parisc/PCI: Set type for LBA bus_num resource
MAINTAINERS: update parisc architecture file list
parisc: kernel: using strlcpy() instead of strcpy()
parisc: rename "CONFIG_PA7100" to "CONFIG_PA7000"
parisc: fix kernel BUG at arch/parisc/include/asm/mmzone.h:50
parisc: memory overflow, 'name' length is too short for using
Helge Deller [Thu, 30 May 2013 21:06:39 +0000 (21:06 +0000)]
parisc: parport0: fix this legacy no-device port driver!
Fix the above kernel error from parport_announce_port() on 32bit GSC
machines (e.g. B160L). The parport driver requires now a pointer to the
device struct.
Helge Deller [Thu, 30 May 2013 16:24:46 +0000 (16:24 +0000)]
parport_pc: disable PARPORT_PC_SUPERIO on parisc architecture
If enabled, CONFIG_PARPORT_PC_SUPERIO scans on PC-like hardware for
various super-io chips by accessing i/o ports in a range which will
crash any parisc hardware at once.
In addition, parisc has it's own incompatible superio chip
(CONFIG_SUPERIO), so if we disable PARPORT_PC_SUPERIO completely for
parisc we can avoid that people by accident enable the parport_pc
superio option too.
Helge Deller [Fri, 31 May 2013 22:24:58 +0000 (22:24 +0000)]
parisc/PCI: lba: fix: convert to pci_create_root_bus() for correct root bus resources (v2)
commit dc7dce280a
Author: Bjorn Helgaas <bhelgaas@google.com>
Date: Fri Oct 28 16:27:27 2011 -0600
parisc/PCI: lba: convert to pci_create_root_bus() for correct root bus
resources
Supply root bus resources to pci_create_root_bus() so they're correct
immediately. This fixes the problem of "early" and "header" quirks seeing
incorrect root bus resources.
added tests for elmmio_space.start while it should use
elmmio_space.flags. This for example led to incorrect resource
assignments and a non-working stifb framebuffer on most parisc machines.
LBA 10:1: PCI host bridge to bus 0000:01
pci_bus 0000:01: root bus resource [io 0x12000-0x13fff] (bus address [0x2000-0x3fff])
pci_bus 0000:01: root bus resource [mem 0xfffffffffa000000-0xfffffffffbffffff] (bus address [0xfa000000-0xfbffffff])
pci_bus 0000:01: root bus resource [mem 0xfffffffff4800000-0xfffffffff4ffffff] (bus address [0xf4800000-0xf4ffffff])
pci_bus 0000:01: root bus resource [??? 0x00000001 flags 0x0]
Bjorn Helgaas [Thu, 30 May 2013 17:45:39 +0000 (11:45 -0600)]
parisc/PCI: Set type for LBA bus_num resource
The non-PAT resource probing code failed to set the type of the LBA bus_num
resource (30aa80da43 "parisc/PCI: register busn_res for root buses" did
the corresponding thing for the PAT case).
This causes incorrect resource assignments and a non-working stifb
framebuffer on most parisc machines.
Paul Bolle [Wed, 29 May 2013 09:56:58 +0000 (09:56 +0000)]
parisc: rename "CONFIG_PA7100" to "CONFIG_PA7000"
There's a Makefile line setting cflags for CONFIG_PA7100. But that
Kconfig macro doesn't exist. There is a Kconfig symbol PA7000, which
covers both PA7000 and PA7100 processors. So let's use the corresponding
Kconfig macro.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Helge Deller <deller@gmx.de>
Helge Deller [Tue, 28 May 2013 20:35:54 +0000 (20:35 +0000)]
parisc: fix kernel BUG at arch/parisc/include/asm/mmzone.h:50
With CONFIG_DISCONTIGMEM=y and multiple physical memory areas,
cat /proc/kpageflags triggers this kernel bug:
kernel BUG at arch/parisc/include/asm/mmzone.h:50!
CPU: 2 PID: 7848 Comm: cat Tainted: G D W 3.10.0-rc3-64bit #44
IAOQ[0]: kpageflags_read0x128/0x238
IAOQ[1]: kpageflags_read0x12c/0x238
RP(r2): proc_reg_read0xbc/0x130
Backtrace:
[<00000000402ca2d4>] proc_reg_read0xbc/0x130
[<0000000040235bcc>] vfs_read0xc4/0x1d0
[<0000000040235f0c>] SyS_read0x94/0xf0
[<0000000040105fc0>] syscall_exit0x0/0x14
kpageflags_read() walks through the whole memory, even if some memory
areas are physically not available. So, we should better not BUG on an
unavailable pfn in pfn_to_nid() but just return the expected value -1 or
0.
Linus Torvalds [Sat, 1 Jun 2013 11:13:16 +0000 (20:13 +0900)]
Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Pull powerpc fixes from Ben Herrenschmidt:
"Here are a few more fixes for powerpc 3.10. It's a bit more than I
would have liked this late in the game but I suppose that's what
happens with a brand new chip generation coming out.
A few regression fixes, some last minute fixes for new P8 features
such as transactional memory,...
There's also one powerpc KVM patch that I requested that adds two
missing functions to our in-kernel interrupt controller support which
is itself a new 3.10 feature. These are defined by the base
hypervisor specification. We didn't implement them originally because
Linux doesn't use them but they are simple and I'm not comfortable
having a half-implemented interface in 3.10 and having to deal with
versionning etc... later when something starts needing those calls.
They cannot be emulated in qemu when using in-kernel interrupt
controller (not enough shared state).
Just added a last minute patch to fix a typo introducing a breakage in
our cputable for Power7+ processors, sorry about that, but the
regression it fixes just hurt me :-)"
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
powerpc/cputable: Fix typo on P7+ cputable entry
powerpc/perf: Add missing SIER support
powerpc/perf: Revert to original NO_SIPR logic
powerpc/pci: Remove the unused variables in pci_process_bridge_OF_ranges
powerpc/pci: Remove the stale comments of pci_process_bridge_OF_ranges
powerpc/pseries: Always enable CONFIG_HOTPLUG_CPU on PSERIES SMP
powerpc/kvm/book3s: Add support for H_IPOLL and H_XIRR_X in XICS emulation
powerpc/32bit:Store temporary result in r0 instead of r8
powerpc/mm: Always invalidate tlb on hpte invalidate and update
powerpc/pseries: Improve stream generation comments in copypage/user
powerpc/pseries: Kill all prefetch streams on context switch
powerpc/cputable: Fix oprofile_cpu_type on power8
powerpc/mpic: Fix irq distribution problem when MPIC_SINGLE_DEST_CPU
powerpc/tm: Fix userspace stack corruption on signal delivery for active transactions
powerpc/tm: Move TM abort cause codes to uapi
powerpc/tm: Abort on emulation and alignment faults
powerpc/tm: Update cause codes documentation
powerpc/tm: Make room for hypervisor in abort cause codes
Pull scsi target fixes from Nicholas Bellinger:
"The highlights include:
- Re-instate sess->wait_list in target_wait_for_sess_cmds() for
active I/O shutdown handling in fabrics using se_cmd->cmd_kref
- Make ib_srpt call target_sess_cmd_list_set_waiting() during session
shutdown
- Fix FILEIO off-by-one READ_CAPACITY bug for !S_ISBLK export
- Fix iscsi-target login error heap buffer overflow (Kees)
- Fix iscsi-target active I/O shutdown handling regression in
v3.10-rc1
A big thanks to Kees Cook for fixing a long standing login error
buffer overflow bug.
All patches are CC'ed to stable with the exception of the v3.10-rc1
specific regression + other minor target cleanup."
* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
iscsi-target: Fix iscsit_free_cmd() se_cmd->cmd_kref shutdown handling
target: Propigate up ->cmd_kref put return via transport_generic_free_cmd
iscsi-target: fix heap buffer overflow on error
target/file: Fix off-by-one READ_CAPACITY bug for !S_ISBLK export
ib_srpt: Call target_sess_cmd_list_set_waiting during shutdown_session
target: Re-instate sess_wait_list for target_wait_for_sess_cmds
target: Remove unused wait_for_tasks bit in target_wait_for_sess_cmds
Linus Torvalds [Sat, 1 Jun 2013 10:55:26 +0000 (19:55 +0900)]
Merge tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mturquette/linux
Pull clock subsystem fixes from Mike Turquette:
"A mix of small fixes affecting mostly ARM platforms as well as a
discrete clock expander chip. Most fixes are corrections to lousy
clock data of one form or another."
* tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mturquette/linux:
clk: mxs: Include clk mxs header file
clk: vt8500: Fix unbalanced spinlock in vt8500_dclk_set_rate()
clk: si5351: Set initial clkout rate when defined in platform data.
clk: si5351: Fix clkout rate computation.
clk: samsung: Add CLK_IGNORE_UNUSED flag for the sysreg clocks
clk: ux500: clk-sysctrl: handle clocks with no parents
clk: ux500: Provide device enumeration number suffix for SMSC911x
Linus Torvalds [Sat, 1 Jun 2013 10:51:52 +0000 (19:51 +0900)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull assorted fixes from Al Viro:
"There'll be more - I'm trying to dig out from under the pile of mail
(a couple of weeks of something flu-like ;-/) and there's several more
things waiting for review; this is just the obvious stuff."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
zoran: racy refcount handling in vm_ops ->open()/->close()
befs_readdir(): do not increment ->f_pos if filldir tells us to stop
hpfs: deadlock and race in directory lseek()
qnx6: qnx6_readdir() has a braino in pos calculation
fix buffer leak after "scsi: saner replacements for ->proc_info()"
vfs: Fix invalid ida_remove() call
Linus Torvalds [Sat, 1 Jun 2013 10:48:59 +0000 (19:48 +0900)]
Merge tag 'nfs-for-3.10-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull two NFS client fixes from Trond Myklebust:
- Fix a regression that broke NFS mounting using klibc and busybox
- Stable fix to check access modes correctly on NFSv4 delegated open()
* tag 'nfs-for-3.10-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFS: Fix security flavor negotiation with legacy binary mounts
NFSv4: Fix a thinko in nfs4_try_open_cached
Olof Johansson [Sat, 1 Jun 2013 07:38:04 +0000 (00:38 -0700)]
Merge tag 'at91-dt' of git://github.com/at91linux/linux-at91 into next/dt
From Nicolas Ferre:
Big DT-centric update for AT91:
- Calao boards update, removal of one board C file and
associated defconfig, Kconfig Makefile lines
- several Acme boards updates
- addition of watchdog, uart and pinctrl descriptions for
several products
- modification of RTC compatible string for 9x5 family
* tag 'at91-dt' of git://github.com/at91linux/linux-at91: (21 commits)
ARM: at91/dt: add pinctrl definition for at91 tc blocks
ARM: at91/dts: add the watchdog nodes for at91 boards
ARM: at91/dtsi: add the watchdog nodes for at91 SoC
ARM: at91: drop non DT: Calao USB-A96x
ARM: at91: dt: add Calao USB-A9G20 low power version
ARM: at91: dt: usb-a9263: add dataflash support
ARM: at91: dt: usb-a9263: update shutdown controller
ARM: at91: dt: usb-a9260: update shutdown controller
ARM: at91: dt: sam9260: add i2c gpio pinctrl
ARM: at91: switch Fox G20 board .dts to pre-processor defines
ARM: at91: add Acme Systems Fox G20 board
ARM: at91/at91-ariag25.dts: UART0/1 nodes are disabled
ARM: at91/at91sam9x5.dtsi: add UART0/1 nodes
ARM: at91/at91-ariag25.dts: add RTC node
ARM: at91: at91sam9x5 RTC is not compatible with at91rm9200 one
ARM: at91: udpate defconfigs
ARM: at91: dt: switch to standard IRQ flag defines
ARM: at91: dt: switch to pinctrl to pre-processor
ARM: at91: dt: add pinctrl pre-processor define
ARM: at91: dt: switch to standard GPIO flag defines.
...
Arnd Bergmann [Fri, 31 May 2013 15:49:28 +0000 (17:49 +0200)]
ARM: nomadik: fix clocksource warning
The clocksource API has changed slightly, which causes a harmless
warning:
/git/arm-soc/drivers/clocksource/nomadik-mtu.c:259:28: warning: 'nmdk_timer_match' defined but not used [-Wunused-variable]
static struct of_device_id nmdk_timer_match[] __initconst = {
^
Fortunately, the same API change also lets us simplify the code
while removing the warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sat, 1 Jun 2013 06:41:41 +0000 (23:41 -0700)]
Merge branch 'next/soc' into for-next
* next/soc:
ARM: vexpress: Select multi-cluster SMP operation if required
ARM: vexpress/dcscb: handle platform coherency exit/setup and CCI
ARM: vexpress/dcscb: do not hardcode number of CPUs per cluster
ARM: vexpress/dcscb: add CPU use counts to the power up/down API implementation
ARM: vexpress: introduce DCSCB support
ARM: introduce common set_auxcr/get_auxcr functions
drivers/bus: arm-cci: function to enable CCI ports from early boot code
drivers: bus: add ARM CCI support
ARM: Enable selection of SMP operations at boot time
arm: introduce psci_smp_ops
ARM: ARMv7-M: implement read_cpuid_ext
ARM: ARMv7-M: Allow the building of new kernel port
ARM: ARMv7-M: Add support for exception handling
ARM: Add base support for ARMv7-M
Olof Johansson [Sat, 1 Jun 2013 06:39:35 +0000 (23:39 -0700)]
Merge branch 'VExpress_DCSCB' of git://git.linaro.org/people/nico/linux into next/soc
From Nicolas Pitre:
This is the first MCPM backend submission for VExpress running on RTSM
aka Fast Models implementing the big.LITTLE system architecture. This
enables SMP secondary boot as well as CPU hotplug on this platform.
A big prerequisite for this support is the CCI driver from Lorenzo
included in this pull request.
Also included is Rob Herring's set_auxcr/get_auxcr allowing nicer code.
Signed-off-by: Olof Johansson <olof@lixom.net>
* 'VExpress_DCSCB' of git://git.linaro.org/people/nico/linux:
ARM: vexpress: Select multi-cluster SMP operation if required
ARM: vexpress/dcscb: handle platform coherency exit/setup and CCI
ARM: vexpress/dcscb: do not hardcode number of CPUs per cluster
ARM: vexpress/dcscb: add CPU use counts to the power up/down API implementation
ARM: vexpress: introduce DCSCB support
ARM: introduce common set_auxcr/get_auxcr functions
drivers/bus: arm-cci: function to enable CCI ports from early boot code
drivers: bus: add ARM CCI support
Olof Johansson [Sat, 1 Jun 2013 06:37:22 +0000 (23:37 -0700)]
Merge branch 'depends/rmk-devel-stable' into next/soc
Pulling in base dependencies from rmk's devel-stable branch needed by the
CCI patches for vexpress.
Signed-off-by: Olof Johansson <olof@lixom.net>
* depends/rmk-devel-stable:
ARM: Enable selection of SMP operations at boot time
arm: introduce psci_smp_ops
ARM: ARMv7-M: implement read_cpuid_ext
ARM: ARMv7-M: Allow the building of new kernel port
ARM: ARMv7-M: Add support for exception handling
ARM: Add base support for ARMv7-M
Olof Johansson [Sat, 1 Jun 2013 06:21:13 +0000 (23:21 -0700)]
Merge branch 'next/soc' into for-next
* next/soc:
pci: mvebu: fix the emulation of the status register
pci: mvebu: allow the enumeration of devices beyond physical bridges
pci: mvebu: no longer fake the slot location of downstream devices
Olof Johansson [Sat, 1 Jun 2013 06:20:52 +0000 (23:20 -0700)]
Merge tag 'pcie_bridge-3.11' of git://git.infradead.org/users/jcooper/linux into next/soc
From Jason Cooper:
mvebu pcie driver (bridge) for v3.11
- mvebu
- allow enumeration of devices beyond physical bridges
- remove faking the slot location
- fix status register emulation
Signed-off-by: Olof Johansson <olof@lixom.net>
* tag 'pcie_bridge-3.11' of git://git.infradead.org/users/jcooper/linux:
pci: mvebu: fix the emulation of the status register
pci: mvebu: allow the enumeration of devices beyond physical bridges
pci: mvebu: no longer fake the slot location of downstream devices
Olof Johansson [Sat, 1 Jun 2013 06:19:45 +0000 (23:19 -0700)]
Merge branch 'next/soc' into for-next
* next/soc:
arm: kirkwood: convert db-88f6281/db-88f6282 to the Device Tree
arm: kirkwood: convert QNAP TS219 to use DT for the PCIe interface
arm: kirkwood: convert ZyXEL NSA310 to use DT for the PCIe interface
arm: kirkwood: convert MPL CEC4 to use DT for the PCIe interface
arm: kirkwood: convert Iomega Iconnect to use DT for the PCIe interface
arm: kirkwood: add SoC-level Device Tree data for PCIe interfaces
arm: kirkwood: move PCIe window init to legacy driver
pci: mvebu: enable driver usage on Kirkwood
Olof Johansson [Sat, 1 Jun 2013 06:17:39 +0000 (23:17 -0700)]
Merge tag 'pcie_kw-3.11' of git://git.infradead.org/users/jcooper/linux into next/soc
From Jason Cooper:
mvebu pcie driver (kirkwood) for v3.11
- kirkwood
- enable pcie driver
- migrate boards over to pcie dt init
depends
- mvebu/pcie
- mvebu/of_pci
Signed-off-by: Olof Johansson <olof@lixom.net>
* tag 'pcie_kw-3.11' of git://git.infradead.org/users/jcooper/linux:
arm: kirkwood: convert db-88f6281/db-88f6282 to the Device Tree
arm: kirkwood: convert QNAP TS219 to use DT for the PCIe interface
arm: kirkwood: convert ZyXEL NSA310 to use DT for the PCIe interface
arm: kirkwood: convert MPL CEC4 to use DT for the PCIe interface
arm: kirkwood: convert Iomega Iconnect to use DT for the PCIe interface
arm: kirkwood: add SoC-level Device Tree data for PCIe interfaces
arm: kirkwood: move PCIe window init to legacy driver
pci: mvebu: enable driver usage on Kirkwood
Olof Johansson [Sat, 1 Jun 2013 06:14:21 +0000 (23:14 -0700)]
Merge branch 'next/soc' into for-next
* next/soc:
pci: mvebu: fix return value check in mvebu_pcie_probe()
arm: mvebu: PCIe support is now available on mvebu
pci: PCIe driver for Marvell Armada 370/XP systems
clk: mvebu: add more PCIe clocks for Armada XP
clk: mvebu: create parent-child relation for PCIe clocks on Armada 370
Olof Johansson [Sat, 1 Jun 2013 06:13:24 +0000 (23:13 -0700)]
Merge tag 'pcie-3.11-2' of git://git.infradead.org/users/jcooper/linux into next/soc
PCI-e driver for mvebu.
* tag 'pcie-3.11-2' of git://git.infradead.org/users/jcooper/linux:
pci: mvebu: fix return value check in mvebu_pcie_probe()
arm: mvebu: PCIe support is now available on mvebu
pci: PCIe driver for Marvell Armada 370/XP systems
clk: mvebu: add more PCIe clocks for Armada XP
clk: mvebu: create parent-child relation for PCIe clocks on Armada 370
of/pci: Add of_pci_parse_bus_range() function
of/pci: Add of_pci_get_devfn() function
of/pci: Provide support for parsing PCI DT ranges property
Olof Johansson [Sat, 1 Jun 2013 05:58:09 +0000 (22:58 -0700)]
Merge branch 'next/cleanup' into for-next
* next/cleanup:
of/pci: Add of_pci_parse_bus_range() function
of/pci: Add of_pci_get_devfn() function
of/pci: Provide support for parsing PCI DT ranges property
Olof Johansson [Sat, 1 Jun 2013 05:56:35 +0000 (22:56 -0700)]
Merge tag 'of_pci-3.11' of git://git.infradead.org/users/jcooper/linux into next/cleanup
From Jason Cooper, of/pci changes for v3.11.
The patches had Reviewed-by: from Rob Herring on the lists, but seems to
have been missed from the commit messages. These will be required as a base
for some of the other functionality in this merge window, so taking it through
arm-soc.
Signed-off-by: Olof Johansson <olof@lixom.net>
* tag 'of_pci-3.11' of git://git.infradead.org/users/jcooper/linux:
of/pci: Add of_pci_parse_bus_range() function
of/pci: Add of_pci_get_devfn() function
of/pci: Provide support for parsing PCI DT ranges property
Olof Johansson [Sat, 1 Jun 2013 05:48:27 +0000 (22:48 -0700)]
Merge branch 'next/dt' into for-next
* next/dt: (27 commits)
arm: kirkwood: openblocks-a6: add support for Init button
arm: kirkwood: openblocks-a6: group pinmux configurations
arm: kirkwood: ts219: move pinmux configs to the right devices
arm: kirkwood: topkick: move pinmux configs to the right devices
arm: kirkwood: openblocks_a6: move pinmux configs to the right devices
arm: kirkwood: nsa310: move pinmux configs to the right devices
arm: kirkwood: readynas: move pinmux configs to the right devices
arm: kirkwood: mplcec4: move pinmux configs to the right devices
arm: kirkwood: buffalo linkstation: move pinmux configs to the right devices
arm: kirkwood: keymile: move pinmux configs to the right devices
arm: kirkwood: ns2: move pinmux configs to the right devices
arm: kirkwood: iomega ix2-200: move pinmux configs to the right devices
arm: kirkwood: iconnect: move pinmux configs to the right devices
arm: kirkwood: iconnect: give meaningful names to pinmux configs
arm: kirkwood: ib62x0: move pinmux configs to the right devices
arm: kirkwood: guruplug: move pinmux configs to the right devices
arm: kirkwood: goflexnet: move pinmux configs to the right devices
arm: kirkwood: dreamplug: move pinmux configs to the right devices
arm: kirkwood: dockstar: move pinmux configs to the right devices
arm: kirkwood: dlink dns: move pinmux configs to the right devices
...
Olof Johansson [Sat, 1 Jun 2013 05:47:53 +0000 (22:47 -0700)]
Merge tag 'dt-3.11-3' of git://git.infradead.org/users/jcooper/linux into next/dt
From jason Cooper, mvebu dt changes for v3.11.
Signed-off-by: Olof Johansson <olof@lixom.net>
* tag 'dt-3.11-3' of git://git.infradead.org/users/jcooper/linux: (27 commits)
arm: kirkwood: openblocks-a6: add support for Init button
arm: kirkwood: openblocks-a6: group pinmux configurations
arm: kirkwood: ts219: move pinmux configs to the right devices
arm: kirkwood: topkick: move pinmux configs to the right devices
arm: kirkwood: openblocks_a6: move pinmux configs to the right devices
arm: kirkwood: nsa310: move pinmux configs to the right devices
arm: kirkwood: readynas: move pinmux configs to the right devices
arm: kirkwood: mplcec4: move pinmux configs to the right devices
arm: kirkwood: buffalo linkstation: move pinmux configs to the right devices
arm: kirkwood: keymile: move pinmux configs to the right devices
arm: kirkwood: ns2: move pinmux configs to the right devices
arm: kirkwood: iomega ix2-200: move pinmux configs to the right devices
arm: kirkwood: iconnect: move pinmux configs to the right devices
arm: kirkwood: iconnect: give meaningful names to pinmux configs
arm: kirkwood: ib62x0: move pinmux configs to the right devices
arm: kirkwood: guruplug: move pinmux configs to the right devices
arm: kirkwood: goflexnet: move pinmux configs to the right devices
arm: kirkwood: dreamplug: move pinmux configs to the right devices
arm: kirkwood: dockstar: move pinmux configs to the right devices
arm: kirkwood: dlink dns: move pinmux configs to the right devices
...
Olof Johansson [Sat, 1 Jun 2013 05:47:06 +0000 (22:47 -0700)]
Merge branch 'next/soc' into for-next
* next/soc:
arm: kirkwood: Enable cpufreq and ondemand on kirkwood_defconfig
arm: kirkwood: update defconfig with PCIe driver and board updates
arm: mvebu: update defconfig with PCI and USB support
ARM: Kirkwood: Enable USB 3.0 in kirkwood_defconfig
ARM: kirkwood: enable Sheevaplug DT in defconfig
ARM: mvebu: Add support for USB storage class in mvebu_defconfig
Olof Johansson [Sat, 1 Jun 2013 05:46:02 +0000 (22:46 -0700)]
Merge tag 'defconfig-3.11-3' of git://git.infradead.org/users/jcooper/linux into next/soc
From Jason Cooper, mvebu defconfig changes for v3.11.
Signed-off-by: Olof Johansson <olof@lixom.net>
* tag 'defconfig-3.11-3' of git://git.infradead.org/users/jcooper/linux:
arm: kirkwood: Enable cpufreq and ondemand on kirkwood_defconfig
arm: kirkwood: update defconfig with PCIe driver and board updates
arm: mvebu: update defconfig with PCI and USB support
ARM: Kirkwood: Enable USB 3.0 in kirkwood_defconfig
ARM: kirkwood: enable Sheevaplug DT in defconfig
ARM: mvebu: Add support for USB storage class in mvebu_defconfig
Olof Johansson [Sat, 1 Jun 2013 05:44:56 +0000 (22:44 -0700)]
Merge branch 'next/boards' into for-next
* next/boards:
ARM: Kirkwood: Convert LSXL to restart-poweroff driver.
ARM: Kirkwood: Make use of the QNAP Power off driver.
ARM: Kirkwood: add DT support for Sheevaplug and Sheevaplug eSATA
Olof Johansson [Sat, 1 Jun 2013 05:44:13 +0000 (22:44 -0700)]
Merge tag 'boards-3.11-2' of git://git.infradead.org/users/jcooper/linux into next/boards
From Jason Cooper, mvebu board changes for v3.11.
Signed-off-by: Olof Johansson <olof@lixom.net>
* tag 'boards-3.11-2' of git://git.infradead.org/users/jcooper/linux:
ARM: Kirkwood: Convert LSXL to restart-poweroff driver.
ARM: Kirkwood: Make use of the QNAP Power off driver.
ARM: Kirkwood: add DT support for Sheevaplug and Sheevaplug eSATA
Olof Johansson [Sat, 1 Jun 2013 05:39:49 +0000 (22:39 -0700)]
Merge tag 'soc-3.11-2' of git://git.infradead.org/users/jcooper/linux into next/soc
From Jason Cooper, mvebu soc changes for v3.11
Signed-off-by: Olof Johansson <olof@lixom.net>
* tag 'soc-3.11-2' of git://git.infradead.org/users/jcooper/linux:
arm: kirkwood: Instantiate cpufreq driver
arm: kirkwood: use the default of match table
Olof Johansson [Sat, 1 Jun 2013 05:28:38 +0000 (22:28 -0700)]
Merge tag 'cleanup-3.11-3' of git://git.infradead.org/users/jcooper/linux into next/cleanup
From Jason Cooper, mvebu cleanup for v3.11.
Signed-off-by: Olof Johansson <olof@lixom.net>
* tag 'cleanup-3.11-3' of git://git.infradead.org/users/jcooper/linux:
arm: mvebu: mark functions of armada-370-xp.c as static
ARM: mvebu: Remove init_irq declaration in machine description
ARM: Orion: Remove redundant init_dma_coherent_pool_size()
Olof Johansson [Sat, 1 Jun 2013 05:27:01 +0000 (22:27 -0700)]
Merge tag 'fixes-non-3.11-1' of git://git.infradead.org/users/jcooper/linux into next/fixes-non-critical
From Jason Cooper:
mvebu fixes non-critical for v3.11 (round 1)
- mvebu
- fix register area length in dtsi for ethernet and sata
Signed-off-by: Olof Johansson <olof@lixom.net>
* tag 'fixes-non-3.11-1' of git://git.infradead.org/users/jcooper/linux:
arm: mvebu: fix length of Ethernet registers area in .dtsi
arm: mvebu: fix length of SATA registers area in .dtsi
Olof Johansson [Sat, 1 Jun 2013 05:08:11 +0000 (22:08 -0700)]
Merge tag 'arm-soc-cleanups-for-3.11' of git://github.com/mripard/linux into next/cleanup
From Maxime Ripard:
Cleanups in various machine definitions
- Patches to remove the .init_irq definition when using irqchip_init
- Make the ARM core code call debug_ll_io_init when no map_io callback is
declared
- Remove the .map_io definition in the various machines using it
(Some of these go through the platform maintainers, these are the ones who got
explicitly acked and not picked up by anyone else)
Signed-off-by: Olof Johansson <olof@lixom.net>
* tag 'arm-soc-cleanups-for-3.11' of git://github.com/mripard/linux:
ARM: sunxi: Remove the .map_io function declaration
ARM: mxs: remove the .map_io declaration
ARM: highbank: remove the .map_io declaration
ARM: mmu: Call debug_ll_io_init if no map_io function is specified
ARM: vt8500: Remove init_irq declaration in machine description
ARM: virt: Remove init_irq declaration in machine description
ARM: vexpress: Remove init_irq declaration in machine description
ARM: sirf: Remove init_irq declaration in machine description
ARM: spear: Remove init_irq declaration in machine description
ARM: nomadik: Remove init_irq declaration in machine description
projects / karo-tx-linux.git / log