- fix mixing of declarations and code. The mixing of declarations and
code displays warnings when used against RedHat RHEL4.0 distro (compiler
version is 3.4.3-22.1) and hence I separated them out.
Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The jsm driver uses a static number of 253. The major number 253 is a
reserved for "LOCAL/EXPERIMENTAL USE" by both char and block devices. So
take advantage of the dynamic allocation of major number by the kernel.
Signed-off-by: V. Ananda Krishnan <mansarov@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch adds support for the Olitec ISDN PCI card in the hisax gazel
driver. The gazel driver supports this card, but wasn't aware of its PCI
ids. Users used to modify the PCI ids of a supported card in
include/linux/pci_ids.h and recompile their kernel to get this card
running, as said in most Howtos. This patch makes the hisax gazel driver
recognize the PCI ids of the Olitec ISDN PCI card.
Alan Stern [Wed, 27 Jul 2005 18:43:46 +0000 (11:43 -0700)]
[PATCH] scsi_scan: check return code from scsi_sysfs_add_sdev
Adds a missing check for an error return code from scsi_sysfs_add_sdev.
This resolves entry #4863 in the OSDL bugzilla. Although in that bug
report the failure occurred because of a confusion over scanning vs.
rescanning, in general add_sdev can fail for a number of reasons (the
simplest being insufficient memory) and the caller should cope properly.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Ian Kent [Wed, 27 Jul 2005 18:43:45 +0000 (11:43 -0700)]
[PATCH] autofs4: fix infamous "Busy inodes after umount ..." message
If the automount daemon receives a signal which causes it to sumarily
terminate the autofs4 module leaks dentries. The same problem exists with
detached mount requests without the warning.
This patch cleans these dentries at umount.
Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] watchdog: add missing 0x in alim1535_wdt.c
Usually the device IDs are given in hex. This one is a bit strange: it is
without 0x in the first place and used with it some lines later. I suspect
the first one to be the wrong.
Adrian Bunk [Wed, 27 Jul 2005 18:43:41 +0000 (11:43 -0700)]
[PATCH] drivers/pnp/pnpbios/rsparser.c: fix compile error with PCI=n
drivers/pnp/pnpbios/rsparser.c: In function 'pnpbios_parse_allocated_irqresource':
drivers/pnp/pnpbios/rsparser.c:67: error: too many arguments to function 'pcibios_penalize_isa_irq'
Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
reiserfs_new_inode() can call iput() with the xattr lock held. This will
cause a deadlock to occur when reiserfs_delete_xattrs() is called to clean
up.
The following patch releases the lock and reacquires it after the iput.
This is safe because interaction with xattrs is complete, and the relock is
just to balance out the release in the caller.
The locking needs some reworking to be more sane, but that's more intrusive
and I was just looking to fix this bug.
Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
AS is doing internal msec<->jiffies conversions twice, so the sysfs tunables
which represent time are coming out wrong. The switch from HZ=1000 exposed
this.
Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This adds the "skas0" parameter to force skas0 operation on SKAS3 host and
shows which operating mode has been selected.
Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Olaf Hering [Wed, 27 Jul 2005 18:43:30 +0000 (11:43 -0700)]
[PATCH] uml: add dependency to arch/um/Makefile for parallel builds
the header file must be build before mk_user_constants. Adding it as a
direct dep doesnt work for some reason.
arch/um/os-Linux/util/mk_user_constants.c:2:26: error: user-offsets.h: No such file or directory
arch/um/os-Linux/util/mk_user_constants.c: In function 'main':
arch/um/os-Linux/util/mk_user_constants.c:17: error: '__UM_FRAME_SIZE' undeclared (first use in this function)
arch/um/os-Linux/util/mk_user_constants.c:17: error: (Each undeclared identifier is reported only once
arch/um/os-Linux/util/mk_user_constants.c:17: error: for each function it appears in.)
make[1]: *** [arch/um/os-Linux/util/mk_user_constants] Error 1
Signed-off-by: Olaf Hering <olh@suse.de> Cc: Paolo Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
arch/mips/Kconfig is defining CONFIG_FB as bool and drivers/video/Kconfig
was changed a while ago to define it as tristate. Remove the MIPS
definition.
Tom Rini [Tue, 26 Jul 2005 19:49:53 +0000 (12:49 -0700)]
[PATCH] Change PowerPC MPC8xx maintainer
As Marcelo has been spending a great deal of time working on MPC8xx
systems of late (thanks!) and has more time than I do now for it, I'm
handing this over to him.
Signed-off-by: Tom Rini <trini@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
RLIMIT_RTPRIO is supposed to grant non privileged users the right to use
SCHED_FIFO/SCHED_RR scheduling policies with priorites bounded by the
RLIMIT_RTPRIO value via sched_setscheduler(). This is usually used by
audio users.
Unfortunately this is broken in 2.6.13rc3 as you can see in the excerpt
from sched_setscheduler below:
/*
* Allow unprivileged RT tasks to decrease priority:
*/
if (!capable(CAP_SYS_NICE)) {
/* can't change policy */
if (policy != p->policy)
return -EPERM;
After the above unconditional test which causes sched_setscheduler to
fail with no regard to the RLIMIT_RTPRIO value the following check is made:
Thus I do believe that the RLIMIT_RTPRIO value must be taken into
account for the policy check, especially as the RLIMIT_RTPRIO limit is
of no use without this change.
[PATCH] acpi: Don't call acpi_sleep_prepare from acpi_power_off
Now that all of the code paths that call acpi_power_off
have been modified to call either call kernel_power_off
(which calls apci_sleep_prepare by way of acpi_shutdown)
or to call acpi_sleep_prepare directly it is redundant to call
acpi_sleep_prepare from acpi_power_off.
So simplify the code and simply don't call acpi_sleep_prepare.
In addition there is a little error handling done so if we
can't register the acpi class we don't hook pm_power_off.
I think I have done the right thing with the CONFIG_PM define
but I'm not certain. Can this code even be compiled if
CONFIG_PM is false?
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] acpi_power_off: Don't switch to the boot cpu
machine_power_off on i386 and x86_64 now switch to the
boot cpu out of paranoia and because the MP Specification indicates it
is a good idea on reboot, so for those architectures it is a noop.
I can't see anything in the acpi spec that requires you to be on
the boot cpu to power off the system, so this should not be an issue
for ia64. In addition ia64 has the altix a massive multi-node
system where switching to the boot cpu sounds insane as we may
hot removed the boot cpu.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
i386 machine_power_off was disabling the local apic
and all of it's users wanted to be on the boot cpu.
So call machine_shutdown which places us on the boot
cpu and disables the apics. This keeps us in sync
and reduces the number of cases we need to worry about in
the power management code.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Call machine_shutdown() to move to the boot cpu
and disable apics. Both acpi_power_off and
apm_power_off want to move to the boot cpu.
and we are already disabling the local apics
so calling machine_shutdown simply reuses
code.
ia64 doesn't have a special path in power_off
for efi so there is no reason i386 should. If
we really need to call the efi power off path
the efi driver can set pm_power_off like everyone
else.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] pcwd.c: Call kernel_power_off not machine_power_off
The call appears to come from process context so kernel_power_off
should be safe. And acpi_power_off won't necessarily work if you just
call machine_power_off.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] swpsuspend: Have suspend to disk use factors of sys_reboot
The suspend to disk code was a poor copy of the code in
sys_reboot now that we have kernel_power_off, kernel_restart
and kernel_halt use them instead of poorly duplicating them inline.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] 68328serial: sysrq should use emergency_reboot
The 68328serial.c driver has a weird local reimplementation of
magic sysrq. The code is architecture specific enough that calling
machine_restart() is probably ok. But there is no reason not to call
emergency_restart() so do so.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] Fix watchdog drivers to call emergency_reboot()
If a watchdog driver has decided it is time to reboot the system
we know something is wrong and we are in interrupt context
so emergency_reboot() is what we want.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
sysrq calls into the reboot path from an interrupt handler
we can either push the code do into process context and
call kernel_restart and get a clean reboot or we can simply
reboot the machine, and increase our chances of actually
rebooting. emergency_reboot() seems like the closest match
to what we have previously done, and what we want.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
It is not safe to call set_cpus_allowed() in interrupt
context and disabling the apics is complicated code.
So unconditionally skip machine_shutdown in machine_emergency_reboot
on x86_64.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
We only want to shutdown the apics if reboot_force
is not specified. Be we are doing this both
in machine_shutdown which is called unconditionally
and if (!reboot_force). So simply call machine_shutdown
if (!reboot_force). It looks like something
went weird with merging some of the kexec patches for
x86_64, and caused this.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
set_cpus_allowed is not safe in interrupt context
and disabling apics is complicated code so don't
call machine_shutdown on i386 from emergency_restart().
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] Don't export machine_restart, machine_halt, or machine_power_off.
machine_restart, machine_halt and machine_power_off are machine
specific hooks deep into the reboot logic, that modules
have no business messing with. Usually code should be calling
kernel_restart, kernel_halt, kernel_power_off, or
emergency_restart. So don't export machine_restart,
machine_halt, and machine_power_off so we can catch buggy users.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
When the kernel is working well and we want to restart cleanly
kernel_restart is the function to use. But in many instances
the kernel wants to reboot when thing are expected to be working
very badly such as from panic or a software watchdog handler.
This patch adds the function emergency_restart() so that
callers can be clear what semantics they expect when calling
restart. emergency_restart() is expected to be callable
from interrupt context and possibly reliable in even more
trying circumstances.
This is an initial generic implementation for all architectures.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] Make ctrl_alt_del call kernel_restart to get a proper reboot.
It is obvious we wanted to call kernel_restart here
but since we don't have it the code was expanded inline and hasn't
been correct since sometime in 2.4.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Because the factors of sys_reboot don't exist people calling
into the reboot path duplicate the code badly, leading to
inconsistent expectations of code in the reboot path.
This patch should is just code motion.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Andrew Morton [Tue, 26 Jul 2005 21:08:38 +0000 (14:08 -0700)]
[PATCH] inotify: fix oops fix
Cc: Robert Love <rml@novell.com> Cc: John McCutchan <ttb@tentacle.dhs.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Robert Love [Mon, 25 Jul 2005 19:13:43 +0000 (15:13 -0400)]
[PATCH] inotify: change default limits
Change default inotify limits: Maximum instances per user to 128 and
maximum events per queue to 16k. The max instances used to be 128; the
change to 8 was a mistake. Memory consumption is fine.
Signed-off-by: Robert Love <rml@novell.com> Signed-off-by: John McCutchan <ttb@tentacle.dhs.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Russell King [Tue, 26 Jul 2005 18:44:26 +0000 (19:44 +0100)]
[PATCH] ARM SMP: Add ARMv6 memory barriers
Convert explicit gcc asm-based memory barriers into smp_mb() calls.
These change between barrier() and the ARMv6 data memory barrier
instruction depending on whether ARMv6 SMP is enabled.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This patch lets the Jornada 720 PCMCIA-driver compile again. The
resulting driver has been tested on a Jornada with a CF-card, which
was mounted and accessed successfully.
Signed-off-by: Michael Gernoth <michael@gernoth.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Remove the need for the #ifdefs and place the IRQ handling code for
the s3c2440 into a new file, which is only compiled when the
s3c2440 cpu support is enabled.
Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Ben Dooks [Tue, 26 Jul 2005 18:20:26 +0000 (19:20 +0100)]
[PATCH] ARM: 2828/1: BAST - remove static map of ASIX area
Patch from Ben Dooks
There is no point in mapping this staticaly, the driver is going
to ioremap() the area as it sees fit. Also correct the dates on
the changelog comments
Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
[PATCH] ARM: 2819/1: Fix several S3C24x0 IIS defines
Patch from Dimitry Andric
- Change S3C2440_IISCON_MPLL to S3C2440_IISMOD_MPLL:
The S3C2440 IISCON register doesn\'t control the master clock selection, this is done with the IISMOD register.
- Correct S3C2410_IISMOD_256FS and S3C2410_IISMOD_384FS:
This is set via bit 2 of IISMOD, not bit 1.
- Add S3C2410_IISCON_PSCEN (prescaler enable), for completeness\' sake.
Signed-off-by: Dimitry Andric <dimitry.andric@tomtom.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Michael Chan [Mon, 25 Jul 2005 19:33:22 +0000 (12:33 -0700)]
[TG3]: add 5780 fiber support
Add 5780S support by adding a new tg3_setup_fiber_mii_phy() function and
a timer function for parallel link detection. 5780S uses standard MII
registers for 1000BaseX and runs in GMII mode as opposed to TBI mode on
older serdes chips.
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Mon, 25 Jul 2005 19:30:38 +0000 (12:30 -0700)]
[TG3]: add 5780 basic jumbo frame support
Add basic jumbo frames support for 5780. This chip supports jumbo frames
on the standard receive ring without the jumbo ring. The
TG3_FLAG_JUMBO_ENABLE is changed to TG3_FLAG_JUMBO_RING_ENABLE to
indicate using the jumbo ring on 5704 and older chips. A new
TG3_FLG2_JUMBO_CAPABLE flag is added to indicate jumbo frames support
with or without the jumbo ring.
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 25 Jul 2005 02:36:26 +0000 (19:36 -0700)]
[SPARC64]: Move syscall success and newchild state out of thread flags.
These two bits were accesses non-atomically from assembler
code. So, in order to eliminate any potential races resulting
from that, move these pieces of state into two bytes elsewhere
in struct thread_info.
Signed-off-by: David S. Miller <davem@davemloft.net>
projects / linux-beck.git / log