Johannes Berg [Sun, 24 Jan 2016 14:28:43 +0000 (15:28 +0100)]
iwlwifi: treat iwl_parse_nvm_data() MAC addr as little endian
The MAC address parameters passed to iwl_parse_nvm_data() are passed on
to iwl_set_hw_address_family_8000() which treats them as little endian.
Annotate them as such, and add the missing byte-swapping in mvm.
While at it, add the MAC address to the error to make debugging issues
with it easier.
Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Sara Sharon [Wed, 30 Dec 2015 21:58:29 +0000 (23:58 +0200)]
iwlwifi: mvm: add tlv for multi queue rx support
Previous patches enabled the multi-queue rx path based on
iwl_mvm_has_new_rx_api() which returned false by default.
Change it to return the actual value based on the firmware
TLV which is now defined.
Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Sara Sharon [Thu, 7 Jan 2016 14:50:45 +0000 (16:50 +0200)]
iwlwifi: mvm: change the check for ADD_STA status
The firmware will return the baid for BA session in the
ADD_STA command response.
This requires masking the check of the status, which is
actually only 8 bits, and not the whole 32 bits.
Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Johannes Berg [Wed, 13 Jan 2016 14:01:00 +0000 (15:01 +0100)]
iwlwifi: mvm: support setting minimum quota from debugfs
For debug purposes, allow setting minimum quota (for a single
virtual interface) from debugfs. This is an absolute minimum,
so it can only be set up to 95%.
Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
To be able to test low-latency behaviour properly, split the
different low-latency sources so that setting any one of them,
for example from debugfs, is sufficient; this avoids getting
the debug setting overwritten by other sources.
Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Sara Sharon [Tue, 29 Dec 2015 09:07:15 +0000 (11:07 +0200)]
iwlwifi: mvm: support beacon storing
Currently firmware is configured to filter out beacons. In case
a beacon was changed - it is waking the host.
However, some vendors change their IEs frequently without any
significant change, and redundant wakeups are triggered as a
result.
As a solution disable beacon filtering when entering d0i3.
Instead, firmware will store the latest beacon and upon exiting
d0i3 it will send it up to the host, so the host can act upon
changes (if there were any).
This beacon will arrive as a dedicated notification - support it
as well.
Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
iwlwifi: mvm: add support for negative temperatures
The driver should support also negative temperatures.
So there is a need to separate between the return value and
temperature in order to be able to distinguish between
a negative temperature and error value.
Avri Altman [Wed, 25 Nov 2015 11:17:10 +0000 (13:17 +0200)]
iwlwifi: mvm: Add P2P client snoozing
Enable snoozing and U-APSD on P2P client. The firwmare will
support this only if the BSS vif is not associated.
Make this configurable by a constant variable and disable
it by default.
Hubert Tarasiuk [Sun, 24 Jan 2016 12:35:06 +0000 (13:35 +0100)]
iwlwifi: dvm: handle zero brightness for wifi LED
In order to have the LED being OFF constantly when the
brightness is set to 0, we need to pass IWL_LED_SOLID to
iwl_led_cmd as the off parameter, otherwise the led will
stay on constantly.
This fixes
https://bugzilla.kernel.org/show_bug.cgi?id=110551
Matti Gottlieb [Thu, 31 Dec 2015 16:18:02 +0000 (18:18 +0200)]
iwlwifi: mvm: Do not switch to D3 image on suspend
Currently when the driver is configured with wowlan parameters, and enters
D3 mode, the driver switches the FW image to D3, and when it exists
suspend, it reloads the D0 image.
If the firmware supports the consolidation of the D0 & D3 images there is
no need to load the D3 image on suspend, and no need to reload the D0
image on resume.
Do not switch images on suspend / resume, for firmwares that support
consolidated images.
Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Luca Coelho [Wed, 6 Jan 2016 20:40:38 +0000 (18:40 -0200)]
iwlwifi: pcie: add initial RTPM support for PCI
Add an initial implementation of runtime power management (RTPM) for
PCI devices. With this patch, RTPM is only used when wifi is off
(i.e. the wifi interface is down). This implementation is behind a
new Kconfig flag, IWLWIFI_PCIE_RTPM.
Sara Sharon [Wed, 23 Dec 2015 13:10:03 +0000 (15:10 +0200)]
iwlwifi: pcie: add 9000 series multi queue rx DMA support
The 9000 series introduces several changes in the device
DMA operation.
As the device now supports multi-queue rx, several DMA channels
should be configured.
The flows of providing the device with the allocated RBDs now
changes as well - the device maintains a separate table of used
and free table.
The hardware may use the free table to feed RBDs to any queue.
This requires maintaing a shared table to map returned RBDs to
the original RXB - for that purpose the VID is introduced - an
internal identifier of the RB placed in the lower 12 bits and
returned by HW in the used data.
Another change is the support of 64 bit DMA address.
Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Sara Sharon [Mon, 14 Dec 2015 15:44:11 +0000 (17:44 +0200)]
iwlwifi: pcie: add infrastructure for multi-queue rx
The 9000 series devices will support multi rx queues.
Current code has one static rx queue - change it to allocate
a number of queues per the device capability (pre-9000 devices
have the number of rx queues set to one).
Subsequent generalizations are:
Change the code to access an explicit numbered rx queue only
when the queue number is known - when handling interrupt, when
accessing the default queue and when iterating the queues.
The rest of the functions will receive the rx queue as a pointer.
Generalize the warning in allocation failure to consider the
allocator status instead of a single rx queue status.
Move the rx initial pool of memory buffers to be shared among
all the queues and allocated to the default queue on init.
Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
iwlwifi: pcie: buffer packets to avoid overflowing Tx queues
When the Tx queues are full above a threshold, we
immediately stop the mac80211's queue to stop getting new
packets. This worked until TSO was enabled.
With TSO, one single packet from mac80211 can use many
descriptors since a large send needs to be split into
several segments.
This means that stopping mac80211's queues is not enough
and we also need to ensure that we don't overflow the Tx
queues with one single packet from mac80211.
Add code to transport layer to do just that. Stop
mac80211's queue as soon as the queue is full above the
same threshold as before, and keep pushing the current
packet along with its segments on the queue, but check
that we don't overflow. If that would happen, buffer the
segments, and send them when there is room in the Tx queue
again. Of course, we first need to send the buffered
segments and only then, wake up mac80211's queues.
Linus Torvalds [Wed, 13 Jan 2016 02:51:14 +0000 (18:51 -0800)]
Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
"Algorithms:
- Add RSA padding algorithm
Drivers:
- Add GCM mode support to atmel
- Add atmel support for SAMA5D2 devices
- Add cipher modes to talitos
- Add rockchip driver for rk3288
- Add qat support for C3XXX and C62X"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (103 commits)
crypto: hifn_795x, picoxcell - use ablkcipher_request_cast
crypto: qat - fix SKU definiftion for c3xxx dev
crypto: qat - Fix random config build issue
crypto: ccp - use to_pci_dev and to_platform_device
crypto: qat - Rename dh895xcc mmp firmware
crypto: 842 - remove WARN inside printk
crypto: atmel-aes - add debug facilities to monitor register accesses.
crypto: atmel-aes - add support to GCM mode
crypto: atmel-aes - change the DMA threshold
crypto: atmel-aes - fix the counter overflow in CTR mode
crypto: atmel-aes - fix atmel-ctr-aes driver for RFC 3686
crypto: atmel-aes - create sections to regroup functions by usage
crypto: atmel-aes - fix typo and indentation
crypto: atmel-aes - use SIZE_IN_WORDS() helper macro
crypto: atmel-aes - improve performances of data transfer
crypto: atmel-aes - fix atmel_aes_remove()
crypto: atmel-aes - remove useless AES_FLAGS_DMA flag
crypto: atmel-aes - reduce latency of DMA completion
crypto: atmel-aes - remove unused 'err' member of struct atmel_aes_dev
crypto: atmel-aes - rework crypto request completion
...
Linus Torvalds [Wed, 13 Jan 2016 02:20:20 +0000 (18:20 -0800)]
Merge tag 'upstream-4.5-rc1' of git://git.infradead.org/linux-ubifs
Pull UBI/UBIFS updates from Richard Weinberger:
"This contains three changes - two cleanups and one UBI wear leveling
improvement by Sebastian Siewior"
* tag 'upstream-4.5-rc1' of git://git.infradead.org/linux-ubifs:
ubifs: Use XATTR_*_PREFIX_LEN
UBIFS: add a comment in key.h for unused parameter
mtd: ubi: wl: avoid erasing a PEB which is empty
Linus Torvalds [Wed, 13 Jan 2016 02:15:34 +0000 (18:15 -0800)]
Merge tag 'configfs-for-linus' of git://git.infradead.org/users/hch/configfs
Pull configfs updates from Christoph Hellwig:
"I'm assisting Joel as co-maintainer and patch monkey now, and you will
see pull reuquests from me for a while.
Besides the MAINTAINERS update there is just a single change, which
adds support for binary attributes to configfs, which are very similar
to the sysfs binary attributes. Thanks to Pantelis Antoniou!
You will see another actually bigger set of configfs changes in the
SCSI target pull from Nic - those were merged before this new tree
even existed"
* tag 'configfs-for-linus' of git://git.infradead.org/users/hch/configfs:
configfs: add myself as co-maintainer, updated git tree
configfs: implement binary attributes
Linus Torvalds [Wed, 13 Jan 2016 02:09:35 +0000 (18:09 -0800)]
Merge tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull GFS2 updates from Bob Peterson:
"Here is a list of patches we've accumulated for GFS2 for the current
upstream merge window. Last window's set was short, but I warned that
this one would be bigger, and so it is. We've got 19 patches:
- A patch from Abhi Das to propagate the GFS2_DIF_SYSTEM bit so that
newly added journals don't get flagged, deleted, and recreated by
fsck.gfs2.
- Two patches from Andreas Gruenbacher to improve GFS2 performance
where extended attributes are involved.
- A patch from Andy Price to fix a suspicious rcu dereference error.
- Two patches from Ben Marzinski that rework how GFS2's NFS cookies
are managed. This fixes readdir problems with nfs-over-gfs2.
- A patch from Ben Marzinski that fixes a race in unmounting GFS2.
- A set of four patches from me to move the resource group
reservations inside the gfs2 inode to improve performance and fix a
bug whereby get_write_access improperly prevented some operations
like chown.
- A patch from me to spinlock-protect the setting of system statfs
file data. This was causing small discrepancies between df and du.
- A patch from me to reintroduce a timeout while clearing glocks
which was accidentally dropped some time ago.
- A patch from me to wait for iopen glock dequeues in order to
improve deleting of files that were unlinked from a different
cluster node.
- A patch from me to ensure metadata address spaces get truncated
when an inode is evicted.
- A patch from me to fix a bug in which a memory leak could occur in
some error cases when inodes were trying to be created.
- A patch to consistently use iopen glocks to transition from the
unlinked state to the deleted state.
- A patch to fix a glock reference count error when inode creation
fails.
- A patch from Junxiao Bi to fix an flock panic.
- A patch from Markus Elfring that removes an unnecessary if"
* tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: fix flock panic issue
GFS2: Don't do glock put on when inode creation fails
GFS2: Always use iopen glock for gl_deletes
GFS2: Release iopen glock in gfs2_create_inode error cases
GFS2: Truncate address space mapping when deleting an inode
GFS2: Wait for iopen glock dequeues
gfs2: clear journal live bit in gfs2_log_flush
gfs2: change gfs2 readdir cookie
gfs2: keep offset when splitting dir leaf blocks
GFS2: Reintroduce a timeout in function gfs2_gl_hash_clear
GFS2: Update master statfs buffer with sd_statfs_spin locked
GFS2: Reduce size of incore inode
GFS2: Make rgrp reservations part of the gfs2_inode structure
GFS2: Extract quota data from reservations structure (revert 5407e24)
gfs2: Extended attribute readahead optimization
gfs2: Extended attribute readahead
GFS2: Use rht_for_each_entry_rcu in glock_hash_walk
GFS2: Delete an unnecessary check before the function call "iput"
gfs2: Automatically set GFS2_DIF_SYSTEM flag on system files
Linus Torvalds [Wed, 13 Jan 2016 01:11:47 +0000 (17:11 -0800)]
Merge branch 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc vfs updates from Al Viro:
"All kinds of stuff. That probably should've been 5 or 6 separate
branches, but by the time I'd realized how large and mixed that bag
had become it had been too close to -final to play with rebasing.
Some fs/namei.c cleanups there, memdup_user_nul() introduction and
switching open-coded instances, burying long-dead code, whack-a-mole
of various kinds, several new helpers for ->llseek(), assorted
cleanups and fixes from various people, etc.
One piece probably deserves special mention - Neil's
lookup_one_len_unlocked(). Similar to lookup_one_len(), but gets
called without ->i_mutex and tries to avoid ever taking it. That, of
course, means that it's not useful for any directory modifications,
but things like getting inode attributes in nfds readdirplus are fine
with that. I really should've asked for moratorium on lookup-related
changes this cycle, but since I hadn't done that early enough... I
*am* asking for that for the coming cycle, though - I'm going to try
and get conversion of i_mutex to rwsem with ->lookup() done under lock
taken shared.
There will be a patch closer to the end of the window, along the lines
of the one Linus had posted last May - mechanical conversion of
->i_mutex accesses to inode_lock()/inode_unlock()/inode_trylock()/
inode_is_locked()/inode_lock_nested(). To quote Linus back then:
-----
| This is an automated patch using
|
| sed 's/mutex_lock(&\(.*\)->i_mutex)/inode_lock(\1)/'
| sed 's/mutex_unlock(&\(.*\)->i_mutex)/inode_unlock(\1)/'
| sed 's/mutex_lock_nested(&\(.*\)->i_mutex,[ ]*I_MUTEX_\([A-Z0-9_]*\))/inode_lock_nested(\1, I_MUTEX_\2)/'
| sed 's/mutex_is_locked(&\(.*\)->i_mutex)/inode_is_locked(\1)/'
| sed 's/mutex_trylock(&\(.*\)->i_mutex)/inode_trylock(\1)/'
|
| with a very few manual fixups
-----
I'm going to send that once the ->i_mutex-affecting stuff in -next
gets mostly merged (or when Linus says he's about to stop taking
merges)"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits)
nfsd: don't hold i_mutex over userspace upcalls
fs:affs:Replace time_t with time64_t
fs/9p: use fscache mutex rather than spinlock
proc: add a reschedule point in proc_readfd_common()
logfs: constify logfs_block_ops structures
fcntl: allow to set O_DIRECT flag on pipe
fs: __generic_file_splice_read retry lookup on AOP_TRUNCATED_PAGE
fs: xattr: Use kvfree()
[s390] page_to_phys() always returns a multiple of PAGE_SIZE
nbd: use ->compat_ioctl()
fs: use block_device name vsprintf helper
lib/vsprintf: add %*pg format specifier
fs: use gendisk->disk_name where possible
poll: plug an unused argument to do_poll
amdkfd: don't open-code memdup_user()
cdrom: don't open-code memdup_user()
rsxx: don't open-code memdup_user()
mtip32xx: don't open-code memdup_user()
[um] mconsole: don't open-code memdup_user_nul()
[um] hostaudio: don't open-code memdup_user()
...
Linus Torvalds [Wed, 13 Jan 2016 00:30:34 +0000 (16:30 -0800)]
Merge branch 'work.copy_file_range' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs copy_file_range updates from Al Viro:
"Several series around copy_file_range/CLONE"
* 'work.copy_file_range' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
btrfs: use new dedupe data function pointer
vfs: hoist the btrfs deduplication ioctl to the vfs
vfs: wire up compat ioctl for CLONE/CLONE_RANGE
cifs: avoid unused variable and label
nfsd: implement the NFSv4.2 CLONE operation
nfsd: Pass filehandle to nfs4_preprocess_stateid_op()
vfs: pull btrfs clone API to vfs layer
locks: new locks_mandatory_area calling convention
vfs: Add vfs_copy_file_range() support for pagecache copies
btrfs: add .copy_file_range file operation
x86: add sys_copy_file_range to syscall tables
vfs: add copy_file_range syscall and vfs helper
Linus Torvalds [Tue, 12 Jan 2016 23:46:17 +0000 (15:46 -0800)]
Merge tag 'locks-v4.5-1' of git://git.samba.org/jlayton/linux
Pull file locking updates from Jeff Layton:
"File locking related changes for v4.5 (pile #1)
Highlights:
- new Kconfig option to allow disabling mandatory locking (which is
racy anyway)
- new tracepoints for setlk and close codepaths
- fix for a long-standing bug in code that handles races between
setting a POSIX lock and close()"
* tag 'locks-v4.5-1' of git://git.samba.org/jlayton/linux:
locks: rename __posix_lock_file to posix_lock_inode
locks: prink more detail when there are leaked locks
locks: pass inode pointer to locks_free_lock_context
locks: sprinkle some tracepoints around the file locking code
locks: don't check for race with close when setting OFD lock
locks: fix unlock when fcntl_setlk races with a close
fs: make locks.c explicitly non-modular
locks: use list_first_entry_or_null()
locks: Don't allow mounts in user namespaces to enable mandatory locking
locks: Allow disabling mandatory locking at compile time
Arnd Bergmann [Tue, 12 Jan 2016 15:05:08 +0000 (16:05 +0100)]
net: bnxt: always return values from _bnxt_get_max_rings
Newly added code in the bnxt driver uses a couple of variables that
are never initialized when CONFIG_BNXT_SRIOV is not set, and gcc
correctly warns about that:
In file included from include/linux/list.h:8:0,
from include/linux/module.h:9,
from drivers/net/ethernet/broadcom/bnxt/bnxt.c:10:
drivers/net/ethernet/broadcom/bnxt/bnxt.c: In function 'bnxt_get_max_rings':
include/linux/kernel.h:794:26: warning: 'cp' may be used uninitialized in this function [-Wmaybe-uninitialized]
include/linux/kernel.h:794:26: warning: 'tx' may be used uninitialized in this function [-Wmaybe-uninitialized]
drivers/net/ethernet/broadcom/bnxt/bnxt.c:5730:11: warning: 'rx' may be used uninitialized in this function [-Wmaybe-uninitialized]
drivers/net/ethernet/broadcom/bnxt/bnxt.c:5736:6: note: 'rx' was declared here
This changes the condition so that we fall back to using the PF
data if VF is not available, and always initialize the variables
to something useful.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 6e6c5a57fbe1 ("bnxt_en: Modify bnxt_get_max_rings() to support shared or non shared rings.") Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Rabin Vincent [Tue, 12 Jan 2016 19:17:08 +0000 (20:17 +0100)]
net: bpf: reject invalid shifts
On ARM64, a BUG() is triggered in the eBPF JIT if a filter with a
constant shift that can't be encoded in the immediate field of the
UBFM/SBFM instructions is passed to the JIT. Since these shifts
amounts, which are negative or >= regsize, are invalid, reject them in
the eBPF verifier and the classic BPF filter checker, for all
architectures.
Signed-off-by: Rabin Vincent <rabin@rab.in> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Tue, 12 Jan 2016 21:27:18 +0000 (13:27 -0800)]
Merge branch 'for-linus-4.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml
Pull UML updates from Richard Weinberger:
"This contains beside of random fixes/cleanups two bigger changes:
- seccomp support by Mickaël Salaün
- IRQ rework by Anton Ivanov"
* 'for-linus-4.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
um: Use race-free temporary file creation
um: Do not set unsecure permission for temporary file
um: Fix build error and kconfig for i386
um: Add seccomp support
um: Add full asm/syscall.h support
selftests/seccomp: Remove the need for HAVE_ARCH_TRACEHOOK
um: Fix ptrace GETREGS/SETREGS bugs
um: link with -lpthread
um: Update UBD to use pread/pwrite family of functions
um: Do not change hard IRQ flags in soft IRQ processing
um: Prevent IRQ handler reentrancy
uml: flush stdout before forking
uml: fix hostfs mknod()
Linus Torvalds [Tue, 12 Jan 2016 21:22:12 +0000 (13:22 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"PPC changes will come next week.
- s390: Support for runtime instrumentation within guests, support of
248 VCPUs.
- ARM: rewrite of the arm64 world switch in C, support for 16-bit VM
identifiers. Performance counter virtualization missed the boat.
- x86: Support for more Hyper-V features (synthetic interrupt
controller), MMU cleanups"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (115 commits)
kvm: x86: Fix vmwrite to SECONDARY_VM_EXEC_CONTROL
kvm/x86: Hyper-V SynIC timers tracepoints
kvm/x86: Hyper-V SynIC tracepoints
kvm/x86: Update SynIC timers on guest entry only
kvm/x86: Skip SynIC vector check for QEMU side
kvm/x86: Hyper-V fix SynIC timer disabling condition
kvm/x86: Reorg stimer_expiration() to better control timer restart
kvm/x86: Hyper-V unify stimer_start() and stimer_restart()
kvm/x86: Drop stimer_stop() function
kvm/x86: Hyper-V timers fix incorrect logical operation
KVM: move architecture-dependent requests to arch/
KVM: renumber vcpu->request bits
KVM: document which architecture uses each request bit
KVM: Remove unused KVM_REQ_KICK to save a bit in vcpu->requests
kvm: x86: Check kvm_write_guest return value in kvm_write_wall_clock
KVM: s390: implement the RI support of guest
kvm/s390: drop unpaired smp_mb
kvm: x86: fix comment about {mmu,nested_mmu}.gva_to_gpa
KVM: x86: MMU: Use clear_page() instead of init_shadow_page_table()
arm/arm64: KVM: Detect vGIC presence at runtime
...
Linus Torvalds [Tue, 12 Jan 2016 21:05:36 +0000 (13:05 -0800)]
Merge tag 'for-linus-4.5-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from David Vrabel:
"Xen features and fixes for 4.5-rc0:
- Stolen ticks and PV wallclock support for arm/arm64
- Add grant copy ioctl to gntdev device"
* tag 'for-linus-4.5-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/gntdev: add ioctl for grant copy
x86/xen: don't reset vcpu_info on a cancelled suspend
xen/gntdev: constify mmu_notifier_ops structures
xen/grant-table: constify gnttab_ops structure
xen/time: use READ_ONCE
xen/x86: convert remaining timespec to timespec64 in xen_pvclock_gtod_notify
xen/x86: support XENPF_settime64
xen/arm: set the system time in Xen via the XENPF_settime64 hypercall
xen/arm: introduce xen_read_wallclock
arm: extend pvclock_wall_clock with sec_hi
xen: introduce XENPF_settime64
xen/arm: introduce HYPERVISOR_platform_op on arm and arm64
xen: rename dom0_op to platform_op
xen/arm: account for stolen ticks
arm64: introduce CONFIG_PARAVIRT, PARAVIRT_TIME_ACCOUNTING and pv_time_ops
arm: introduce CONFIG_PARAVIRT, PARAVIRT_TIME_ACCOUNTING and pv_time_ops
missing include asm/paravirt.h in cputime.c
xen: move xen_setup_runstate_info and get_runstate_snapshot to drivers/xen/time.c
Linus Torvalds [Tue, 12 Jan 2016 20:47:23 +0000 (12:47 -0800)]
Merge branch 'component' of git://ftp.arm.linux.org.uk/~rmk/linux-arm
Pull component updates from Russell King:
"Updates for the component helper merged last year.
This update removes the old add_components method of detecting and
looking up the components associated with a master device. Last time
I checked during the 4.4-rc cycle, there were no users of the old
interfaces, as has been the case for some time now. Breakage due to
conflicting development is possible, in which case this pull will have
to be reverted - however, these changes have been in linux-next since
Dec 7th without any problems reported.
Removal of that then allows us to change the way we track components
internally, allowing us to release data that has been used for
matching at the appropriate time, thereby allowing any resource leaks
caused by that missing functionality to be resolved"
* 'component' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
component: add support for releasing match data
component: track components via array rather than list
component: move check for unbound master into try_to_bring_up_masters()
component: remove old add_components method
Linus Torvalds [Tue, 12 Jan 2016 20:39:07 +0000 (12:39 -0800)]
Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm
Pull ARM updates from Russell King:
- UEFI boot and runtime services support for ARM from Ard Biesheuvel
and Roy Franz.
- DT compatibility with old atags booting protocol for Nokia N900
devices from Ivaylo Dimitrov.
- PSCI firmware interface using new arm-smc calling convention from
Jens Wiklander.
- Runtime patching for udiv/sdiv instructions for ARMv7 CPUs that
support these instructions from Nicolas Pitre.
- L2x0 cache updates from Dirk B and Linus Walleij.
- Randconfig fixes from Arnd Bergmann.
- ARMv7M (nommu) updates from Ezequiel Garcia
* 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (34 commits)
ARM: 8481/2: drivers: psci: replace psci firmware calls
ARM: 8480/2: arm64: add implementation for arm-smccc
ARM: 8479/2: add implementation for arm-smccc
ARM: 8478/2: arm/arm64: add arm-smccc
ARM: 8494/1: mm: Enable PXN when running non-LPAE kernel on LPAE processor
ARM: 8496/1: OMAP: RX51: save ATAGS data in the early boot stage
ARM: 8495/1: ATAGS: move save_atags() to arch/arm/include/asm/setup.h
ARM: 8452/3: PJ4: make coprocessor access sequences buildable in Thumb2 mode
ARM: 8482/1: l2x0: make it possible to disable outer sync from DT
ARM: 8488/1: Make IPI_CPU_BACKTRACE a "non-secure" SGI
ARM: 8487/1: Remove IPI_CALL_FUNC_SINGLE
ARM: 8485/1: cpuidle: remove cpu parameter from the cpuidle_ops suspend hook
ARM: 8484/1: Documentation: l2c2x0: Mention separate controllers explicitly
ARM: 8483/1: Documentation: l2c: Rename l2cc to l2c2x0
ARM: 8477/1: runtime patch udiv/sdiv instructions into __aeabi_{u}idiv()
ARM: 8476/1: VDSO: use PTR_ERR_OR_ZERO for vma check
ARM: 8453/2: proc-v7.S: don't locate temporary stack space in .text section
ARM: add UEFI stub support
ARM: wire up UEFI init and runtime support
ARM: only consider memblocks with NOMAP cleared for linear mapping
...
Linus Torvalds [Tue, 12 Jan 2016 20:29:25 +0000 (12:29 -0800)]
Merge tag 'arm64-perf' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm[64] perf updates from Will Deacon:
"In the past, I have funnelled perf updates through the respective
architecture trees, but now that the arm/arm64 perf driver has been
largely consolidated under drivers/perf/, it makes more sense to send
a separate pull, particularly as I'm listed as maintainer for all the
files involved. I offered the branch to arm-soc, but Arnd suggested
that I just send it to you directly.
So, here is the arm/arm64 perf queue for 4.5. The main features are
described below, but the most useful change is from Drew, which
advertises our architected event mapping in sysfs so that the perf
tool is a lot more user friendly and no longer requires the use of
magic hex constants for profiling common events.
- Support for the CPU PMU in Cortex-A72
- Add sysfs entries to describe the architected events and their
mappings for PMUv{1-3}"
* tag 'arm64-perf' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: perf: add support for Cortex-A72
arm64: perf: add format entry to describe event -> config mapping
ARM: perf: add format entry to describe event -> config mapping
arm64: kernel: enforce pmuserenr_el0 initialization and restore
arm64: perf: Correct Cortex-A53/A57 compatible values
arm64: perf: Add event descriptions
arm64: perf: Convert event enums to #defines
arm: perf: Add event descriptions
arm: perf: Convert event enums to #defines
drivers/perf: kill armpmu_register
Linus Torvalds [Tue, 12 Jan 2016 20:23:33 +0000 (12:23 -0800)]
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"Here is the core arm64 queue for 4.5. As you might expect, the
Christmas break resulted in a number of patches not making the final
cut, so 4.6 is likely to be larger than usual. There's still some
useful stuff here, however, and it's detailed below.
The EFI changes have been Reviewed-by Matt and the memblock change got
an "OK" from akpm.
Summary:
- Support for a separate IRQ stack, although we haven't reduced the
size of our thread stack just yet since we don't have enough data
to determine a safe value
- Refactoring of our EFI initialisation and runtime code into
drivers/firmware/efi/ so that it can be reused by arch/arm/.
- Ftrace improvements when unwinding in the function graph tracer
- Document our silicon errata handling process
- Cache flushing optimisation when mapping executable pages
- Support for hugetlb mappings using the contiguous hint in the pte"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (45 commits)
arm64: head.S: use memset to clear BSS
efi: stub: define DISABLE_BRANCH_PROFILING for all architectures
arm64: entry: remove pointless SPSR mode check
arm64: mm: move pgd_cache initialisation to pgtable_cache_init
arm64: module: avoid undefined shift behavior in reloc_data()
arm64: module: fix relocation of movz instruction with negative immediate
arm64: traps: address fallout from printk -> pr_* conversion
arm64: ftrace: fix a stack tracer's output under function graph tracer
arm64: pass a task parameter to unwind_frame()
arm64: ftrace: modify a stack frame in a safe way
arm64: remove irq_count and do_softirq_own_stack()
arm64: hugetlb: add support for PTE contiguous bit
arm64: Use PoU cache instr for I/D coherency
arm64: Defer dcache flush in __cpu_copy_user_page
arm64: reduce stack use in irq_handler
arm64: mm: ensure that the zero page is visible to the page table walker
arm64: Documentation: add list of software workarounds for errata
arm64: mm: place __cpu_setup in .text
arm64: cmpxchg: Don't incldue linux/mmdebug.h
arm64: mm: fold alternatives into .init
...
Linus Torvalds [Tue, 12 Jan 2016 18:33:51 +0000 (10:33 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull m68k updates from Geert Uytterhoeven.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k: Provide __phys_to_pfn() and __pfn_to_phys()
m68k/atari, m68k/sun3: Fix SCSI platform device registration when driver is modular
m68k/defconfig: Update defconfigs for v4.4-rc1
m68k/mac: Kill psc_present
Linus Torvalds [Tue, 12 Jan 2016 18:26:03 +0000 (10:26 -0800)]
Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS fixes from Ralf Baechle:
"This is the final pull request for MIPS for 4.4. It fixes:
- scripts/ld-version.sh parsing of ld version numbers that contain
large numbers as components.
- fix parsing of version numbers as used by Fedora's ld.
Currently scripts/ld-version.sh is only being used by MIPS"
[ This obviously missed 4.4, so getting merged now in the merge window
for 4.5 instead ]
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
ld-version: Fix it on Fedora
Fix ld-version.sh to handle large 3rd version part
Lars Persson [Tue, 12 Jan 2016 14:28:13 +0000 (15:28 +0100)]
dwc_eth_qos: Fix dma address for multi-fragment skbs
The offset inside the fragment was not used for the dma address and
silent data corruption resulted because TSO makes the checksum match.
Fixes: 077742dac2c7 ("dwc_eth_qos: Add support for Synopsys DWC Ethernet QoS") Signed-off-by: Lars Persson <larper@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Tue, 12 Jan 2016 09:36:21 +0000 (12:36 +0300)]
phy: remove an unneeded condition
It used to be that bus->irq was a pointer but after e7f4dc3536a4
('mdio: Move allocation of interrupts into core') it's an array inside
the mdio struct, so it can never be NULL. Let's remove the check.
Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Tue, 12 Jan 2016 09:35:34 +0000 (12:35 +0300)]
mdio: remove an unneed condition
It used to be that mdio->irq was a pointer but after e7f4dc3536a4
('mdio: Move allocation of interrupts into core') it's an array inside
the mdio struct so it can never be NULL.
Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Tue, 12 Jan 2016 09:34:36 +0000 (12:34 +0300)]
mdio_bus: NULL dereference on allocation error
If bus = kzalloc() fails then we end up dereferencing bus when we do
"bus->irq[i] = PHY_POLL;". The code is a little simpler if we reverse
the NULL check and return directly on failure.
Fixes: e7f4dc3536a4 ('mdio: Move allocation of interrupts into core') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Huaitong Han [Tue, 12 Jan 2016 08:04:20 +0000 (16:04 +0800)]
kvm: x86: Fix vmwrite to SECONDARY_VM_EXEC_CONTROL
vmx_cpuid_tries to update SECONDARY_VM_EXEC_CONTROL in the VMCS, but
it will cause a vmwrite error on older CPUs because the code does not
check for the presence of CPU_BASED_ACTIVATE_SECONDARY_CONTROLS.
This will get rid of the following trace on e.g. Core2 6600:
Linus Torvalds [Tue, 12 Jan 2016 06:25:00 +0000 (22:25 -0800)]
Merge tag 'dm-4.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- The most significant set of changes this cycle is the Forward Error
Correction (FEC) support that has been added to the DM verity target.
Google uses DM verity on all Android devices and it is believed that
this FEC support will enable DM verity to recover from storage
failures seen since DM verity was first deployed as part of Android.
- A stable fix for a race in the destruction of DM thin pool's
workqueue
- A stable fix for hung IO if a DM snapshot copy hit an error
- A few small cleanups in DM core and DM persistent data.
- A couple DM thinp range discard improvements (address atomicity of
finding a range and the efficiency of discarding a partially mapped
thin device)
- Add ability to debug DM bufio leaks by recording stack trace when a
buffer is allocated. Upon detected leak the recorded stack is
dumped.
* tag 'dm-4.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm snapshot: fix hung bios when copy error occurs
dm thin: bump thin and thin-pool target versions
dm thin: fix race condition when destroying thin pool workqueue
dm space map metadata: remove unused variable in brb_pop()
dm verity: add ignore_zero_blocks feature
dm verity: add support for forward error correction
dm verity: factor out verity_for_bv_block()
dm verity: factor out structures and functions useful to separate object
dm verity: move dm-verity.c to dm-verity-target.c
dm verity: separate function for parsing opt args
dm verity: clean up duplicate hashing code
dm btree: factor out need_insert() helper
dm bufio: use BUG_ON instead of conditional call to BUG
dm bufio: store stacktrace in buffers to help find buffer leaks
dm bufio: return NULL to improve code clarity
dm block manager: cleanup code that prints stacktrace
dm: don't save and restore bi_private
dm thin metadata: make dm_thin_find_mapped_range() atomic
dm thin metadata: speed up discard of partially mapped volumes
Linus Torvalds [Tue, 12 Jan 2016 06:17:44 +0000 (22:17 -0800)]
Merge tag 'media/v4.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
"The part of patches for Kernel 4.5. There's nothing really big here:
- driver-specific headers for media devices were moved to separate
directories, in order to make clear what headers belong to the core
kABI and require documentation
- Platform data for media drivers were moved from include/media to
include/linux/platform_data/media
- add a driver for cs3308 8-channel volume control, used on some
high-end capture boards
- lirc.h kAPI header were added at include/uapi/linux
- Driver cleanups, new board additions and improvements"
* tag 'media/v4.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (204 commits)
[media] rc: sunxi-cir: Initialize the spinlock properly
[media] rtl2832: do not filter out slave TS null packets
[media] rtl2832: print reg number on error case
[media] rtl28xxu: return demod reg page from driver cache
[media] coda: enable MPEG-2 ES decoding
[media] coda: don't start streaming without queued buffers
[media] coda: hook up vidioc_prepare_buf
[media] coda: relax coda_jpeg_check_buffer for trailing bytes
[media] coda: make to_coda_video_device static
[media] s5p-mfc: remove volatile attribute from MFC register addresses
[media] s5p-mfc: merge together s5p_mfc_hw_call and s5p_mfc_hw_call_void
[media] s5p-mfc: use spinlock to protect MFC context
[media] s5p-mfc: remove unnecessary callbacks
[media] s5p-mfc: make queue cleanup code common
[media] s5p-mfc: use one implementation of s5p_mfc_get_new_ctx
[media] s5p-mfc: constify s5p_mfc_codec_ops structures
[media] au8522: Avoid memory leak for device config data
[media] ir-lirc-codec.c: don't leak lirc->drv-rbuf
[media] uvcvideo: small cleanup in uvc_video_clock_update()
[media] uvcvideo: Fix reading the current exposure value of UVC
...
Linus Torvalds [Tue, 12 Jan 2016 04:40:48 +0000 (20:40 -0800)]
Merge tag 'leds-for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds
Pull LED subsystem updates from Jacek Anaszewski:
"Besides regular driver updates, we introduce a portion of LED core
improvements, that allow to avoid the need for using work queues in
the LED class drivers, that set brightness in a blocking way.
Affected LED class drivers are being optimized accordingly.
- LED core improvements:
- use EXPORT_SYMBOL_GPL consistently,
- add two new LED_BLINK_ flags,
- rename brightness_set_sync op to brightness_set_blocking,
- add led_set_brightness_nosleep{nopm} functions,
- use set_brightness_work for the blocking op,
- drivers shouldn't enforce SYNC/ASYNC brightness setting,
- turn off the LED and wait for completion on unregistering LED
class device,
- add managed version of led_trigger_register,
- add description of brightness setting API to the LED class doc.
- Make the driver explicitly non-modular: ledtrig-cpu,
ledtrig-ide-disk, leds-syscon.
- Improvements to leds-bcm6328:
- reuse bcm6328_led_set() instead of copying its functionality,
- swap LED ON and OFF definitions,
- improve blink support,
- simplify duplicated unlock in bcm6328_blink_set,
- add little endian support,
- remove unneded lock when checking initial LED status,
- add HAS_IOMEM dependency,
- code cleaning.
- Improvements to leds-bcm6358:
- use bcm6358_led_set() in order to get rid of the lock,
- merge bcm6358_led_mode and bcm6358_led_set,
- add little endian support,
- remove unneded lock when checking initial LED status,
- add HAS_IOMEM dependency,
- remove unneeded busy status check.
- Call led_pwm_set() in leds-pwm to enforce default LED_OFF.
- Fix duration to be msec instead of jiffies: ledtrig-transient.
- Removing NULL check: leds-powernv.
- Use platform_register/unregister_drivers(): leds-sunfire.
- Fix driver description and make license match the header: leds-pwm.
- Remove checking for state < 1 in flash_strobe_store():
led-class-flash.
- Use led_set_brightness_sync for torch brightness:
v4l2-flash-led-class"
* tag 'leds-for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: (68 commits)
leds: add HAS_IOMEM dependency to LEDS_BCM6328/LEDS_BCM6358
leds: core: add managed version of led_trigger_register
leds: bcm6358: remove unneeded busy status check
leds: bcm6328: improve blink support
leds: bcm6358: merge bcm6358_led_mode and bcm6358_led_set
leds: bcm6328: simplify duplicated unlock in bcm6328_blink_set
leds: bcm6358: add little endian support
leds: bcm6328: add little endian support
leds: bcm6358: remove unneded lock when checking initial LED status
leds: bcm6358: Use bcm6358_led_set() in order to get rid of the lock
leds: bcm6328: remove unneded lock when checking initial LED
leds: bcm6328: code cleaning
leds: syscon: Make the driver explicitly non-modular
leds: ledtrig-ide-disk: Make the driver explicitly non-modular
leds: ledtrig-cpu: Make the driver explicitly non-modular
leds: sunfire: Use platform_register/unregister_drivers()
leds: max77693: Add missing of_node_put
leds: aat1290: Add missing of_node_put
leds: powernv: Implement brightness_set_blocking op
leds: ipaq-micro: Implement brightness_set_blocking op
...
- make mpc85xx-pci-edac a platform device (Scott Wood)
- sb_edac KNL gen2 support (Jim Snow)
- other small cleanups all over the place
* tag 'edac_for_4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
EDAC, i5100: Use to_delayed_work()
MAINTAINERS: Fix EDAC repo URLs format
EDAC, sb_edac: Set fixed DIMM width on Xeon Knights Landing
EDAC: Rework workqueue handling
EDAC: Make edac_device workqueue setup/teardown functions static
EDAC: Remove edac_get_sysfs_subsys() error handling
EDAC: Unexport and make edac_subsys static
EDAC: Rip out the edac_subsys reference counting
EDAC: Robustify workqueues destruction
EDAC, mc_sysfs: Fix freeing bus' name
EDAC, mpc85xx: Make mpc85xx-pci-edac a platform device
EDAC, sb_edac: Add Knights Landing (Xeon Phi gen 2) support
EDAC, sb_edac: Add support for duplicate device IDs
EDAC, sb_edac: Virtualize several hard-coded functions
EDAC, mv64x60: Use platform_register/unregister_drivers()
EDAC, mpc85xx: Use platform_register/unregister_drivers()
EDAC: Add DDR4 flag
EDAC: Remove references to bluesmoke.sourceforge.net
EDAC, pci: Remove old disabled code
Tom Herbert [Mon, 11 Jan 2016 18:19:10 +0000 (10:19 -0800)]
net: Fix typo in netdev_intersect_features
Obviously need to 'or in NETIF_F_IP_CSUM and NETIF_F_IPV6_CSUM.
Fixes: c8cd0989bd151f ("net: Eliminate NETIF_F_GEN_CSUM and NETIF_F_V[46]_CSUM") Reported-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Tue, 12 Jan 2016 04:28:38 +0000 (20:28 -0800)]
Merge tag 'hwmon-for-linus-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"Notable hwmon changes:
- Add basic support for NCT6683 on Mitac boards
- Add support for AMD new 15h processors to fam15h_power driver
- Add pmbus client driver for LTC3815
- Remove htu21 driver (now supported by iio subsystem)"
* tag 'hwmon-for-linus-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (nct6683) Add basic support for NCT6683 on Mitac boards
hwmon: (ibmaem) constify aem_rw_sensor_template and aem_ro_sensor_template structures
hwmon: (nct6683,nct6775) constify sensor_template_group structures
MAINTAINERS: change the maintainer of fam15h_power driver
hwmon: (fam15h_power) Add support for AMD new 15h processors
hwmon: (pmbus) Add client driver for LTC3815
hwmon: (htu21) Remove driver
Linus Torvalds [Tue, 12 Jan 2016 04:14:34 +0000 (20:14 -0800)]
Merge tag 'regmap-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"There's no real overall theme to the regmap changes for this release,
it's a collection of individual features. The main bits are:
- Support for 64 bit registers, mainly for MMIO use, from Xiubo Li.
- Support for trigger type configuration for regmap-irq from Laxman
Dewangan.
- Use native physical I/O for MMIO register maps to avoid confusion
with the conversions that readl() and writel() do to little endian
on big endian systems (with some DT updates to fix some workarounds
people were doing), code from Simon Arlott.
- Use a binary search rather than iteraton to improve the runtime
performance of the rbtree code from Nikesh Oswal"
* tag 'regmap-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: debugfs: Use seq_file for the access map
regmap: irq: add support for configuration of trigger type
regmap: use IS_ALIGNED instead of % to improve the performance
regmap: cache: Move the num_reg_defaults check as early as possible
regmap: cache: Add warning info for the cache check
regmap: missing case statement
regmap: shift wrapping bugs in 64 bit code
regmap: cache: Add 64-bit mode support
regmap: cache: To suppress the noise of checkpatch
regmap: fix the warning about unused variable
regmap: add 64-bit mode support
regmap: mmio: Add regmap_mmio_get_min_stride
regmap: mmio: remove the useless code
regmap: Fix leftover from struct reg_default to struct reg_sequence change
regmap: replace kmalloc with kmalloc_array
regmap: replace kzalloc with kcalloc
regmap: rbtree: When adding a reg do a bsearch for target node
regmap-mmio: Use native endianness for read/write
Linus Torvalds [Tue, 12 Jan 2016 04:05:39 +0000 (20:05 -0800)]
Merge tag 'pinctrl-v4.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"This is the bulk of pin control patches for the v4.5 series.
Notably I have a patch to driver core from Stephen Boyd in the pull
request, this has been ACKed by Greg so it should be OK. The internal
API needed some tweaking to allow modular Qualcomm pin controllers.
There is a bit of development history in here but it should all add up
nicely and has boiled in linux-next. For example I merged in v4.4-rc5
to get rid of some nasty merge conflicts.
Summary:
- New drivers:
- PXA2xx pin controller support
- Broadcom NSP pin controller support
- New subdrivers:
- Samsung EXYNOS5410 support
- Qualcomm MSM8996 support
- Qualcomm PM8994 support
- Qualcomm PM8994 MPP support
- Allwinner sunxi H3 support
- Allwinner sunxi A80 support
- Rockchip RK3228 support
- Rename the Cygnus pinctrl driver to "iproc" as it is more generic
than was originally thought.
- A bunch of Lantiq/Xway updates especially from the OpenWRT people.
- Several refactorings for the Super-H SH PFC pin controllers.
Adding SCIF_CLK support.
- Several fixes to the Atlas 7 driver.
- Various fixes all over the place"
* tag 'pinctrl-v4.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (91 commits)
pinctrl: mediatek: Modify pinctrl bindings for mt2701
Revert "pinctrl: qcom: make PMIC drivers bool"
pinctrl: qcom: Use platform_irq_count() instead of of_irq_count()
driver-core: platform: Add platform_irq_count()
pinctrl: lantiq: 2 pins have the wrong mux list
pinctrl: qcom: make PMIC drivers bool
pinctrl: nsp-gpio: forever loop in nsp_gpio_get_strength()
pinctrl: mediatek: convert to arch_initcall
pinctrl: bcm2835: Fix memory leak in error path
pinctrl: mediatek: add missing of_node_put
pinctrl: rockchip: add missing of_node_put
pinctrl: sh-pfc: add missing of_node_put
pinctrl: sirf: add missing of_node_put
pinctrl-tegra: add missing of_node_put
pinctrl: sunxi: Add A80 special pin controller
pinctrl: bcm/cygnys/iproc: fixup rebase issue
pinctrl: fixup problematic flag
MAINTAINERS: Add co-maintainer for Renesas Pin Controllers
pinctrl: sh-pfc: r8a7791: add EtherAVB pin groups
pinctrl: sh-pfc: r8a7795: Add SATA support
...
Linus Torvalds [Tue, 12 Jan 2016 03:39:09 +0000 (19:39 -0800)]
Merge tag 'mmc-v4.5' of git://git.linaro.org/people/ulf.hansson/mmc
Pull MMC updates from Ulf Hansson:
"MMC core:
- Optimize boot time by detecting cards simultaneously
- Make runtime resume default behavior for MMC/SD
- Enable MMC/SD/SDIO devices to suspend/resume asynchronously
- Allow more than 8 partitions per card
- Introduce MMC_CAP2_NO_SDIO to prevent unsupported SDIO commands
- Support the standard DT wakeup-source property
- Fix driver strength switching for HS200 and HS400
- Fix switch command timeout
- Fix invalid vdd in voltage switch power cycle for SDIO
MMC host:
- sdhci: Restore behavior when setting VDD via external regulator
- sdhci: A couple of changes/fixes related to the dma support
- sdhci-tegra: Add Tegra210 support
- sdhci-tegra: Support for UHS-I cards including tuning support
- sdhci-of-at91: Add PM support
- sh_mmcif: Rework dma channel handling
- mvsdio: Delete platform data code path"
* tag 'mmc-v4.5' of git://git.linaro.org/people/ulf.hansson/mmc: (52 commits)
mmc: dw_mmc: remove the unused quirks
mmc: sdhci-pci: use to_pci_dev()
mmc: cb710: use to_platform_device()
mmc: tegra: use correct accessor for misc ctrl register
mmc: tegra: enable UHS-I modes
mmc: tegra: implement UHS tuning
mmc: tegra: disable SPI_MODE_CLKEN
mmc: tegra: implement module external clock change
mmc: sdhci: restore behavior when setting VDD via external regulator
mmc: It is not an error for the card to be removed while suspended
mmc: block: Allow more than 8 partitions per card
mmc: core: Optimize boot time by detecting cards simultaneously
mmc: dw_mmc: use resource_size_t to store physical address
mmc: core: fix __mmc_switch timeout caused by preempt
mmc: usdhi6rol0: handle NULL data in timeout
mmc: of_mmc_spi: Add IRQF_ONESHOT to interrupt flags
mmc: mediatek: change some dev_err to dev_dbg
mmc: enable MMC/SD/SDIO device to suspend/resume asynchronously
mmc: sdhci: Fix sdhci_runtime_pm_bus_on/off()
mmc: sdhci: 64-bit DMA actually has 4-byte alignment
...
Linus Torvalds [Tue, 12 Jan 2016 03:33:59 +0000 (19:33 -0800)]
Merge branch 'for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata updates from Tejun Heo:
"Mostly low level driver specific changes.
Two changes are somewhat noteworthy. First, Dan's patchset to support
per-port msix interrupt handling for ahci, which was tried last cycle
but had to be backed out due to a couple issues, is back and seems to
be working fine. Second, libata exception handling now uses
usleep_range() instead of msleep() for sleeps < 20ms which can make
things snappier in some corner cases"
* 'for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
libata: skip debounce delay on link resume
ata: ahci_brcmstb: disable DIPM support
ata: ahci_brcmstb: enable support for ALPM
drivers: libata-core: Use usleep_range() instead of msleep() for short sleeps (<20 ms)
sata_sx4: correctly handling failed allocation
ata: ahci_brcmstb: add support for MIPS-based platforms
ahci: qoriq: Adjust the default register values on ls1021a
ahci: qoriq: Update the default Rx watermark value
ahci: qoriq: Adjust the default register values on ls1043a
ahci: compile out msi/msix infrastructure
ata: core: fix irq description on AHCI single irq systems
ata: ahci_brcmstb: remove unused definitions
ata: ahci_brcmstb: add a quirk for MIPS-based platforms
ata: ahci_brcmstb: disable NCQ for MIPS-based platforms
ata: sata_rcar: Remove obsolete platform_device_id entries
sata_rcar: Add compatible string for r8a7795
ahci: kill 'intr_status'
ahci: switch from 'threaded' to 'hardirq' interrupt handling
ahci: per-port msix support
Linus Torvalds [Tue, 12 Jan 2016 03:13:56 +0000 (19:13 -0800)]
Merge branch 'for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu
Pull percpu updates from Tejun Heo:
"Two trivial percpu patches for v4.5-rc1"
* 'for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
percpu: remove PERCPU_ENOUGH_ROOM which is stale definition
percpu: Remove unneeded return from void function
Linus Torvalds [Tue, 12 Jan 2016 02:53:13 +0000 (18:53 -0800)]
Merge branch 'for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue update from Tejun Heo:
"Workqueue changes for v4.5. One cleanup patch and three to improve
the debuggability.
Workqueue now has a stall detector which dumps workqueue state if any
worker pool hasn't made forward progress over a certain amount of time
(30s by default) and also triggers a warning if a workqueue which can
be used in memory reclaim path tries to wait on something which can't
be.
These should make workqueue hangs a lot easier to debug."
* 'for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: simplify the apply_workqueue_attrs_locked()
workqueue: implement lockup detector
watchdog: introduce touch_softlockup_watchdog_sched()
workqueue: warn if memory reclaim tries to flush !WQ_MEM_RECLAIM workqueue
Linus Torvalds [Tue, 12 Jan 2016 02:28:06 +0000 (18:28 -0800)]
Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"The irq department provides:
- Support for MSI to wire bridges and a first user of it
- More ACPI support for ARM/GIC
- A new TS-4800 interrupt controller driver
- RCU based free of interrupt descriptors to support the upcoming
Intel VMD technology without introducing a locking nightmare
- The usual pile of fixes and updates to drivers and core code"
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits)
irqchip/omap-intc: Add support for spurious irq handling
irqchip/zevio: Use irq_data_get_chip_type() helper
irqchip/omap-intc: Remove duplicate setup for IRQ chip type handler
irqchip/ts4800: Add TS-4800 interrupt controller
irqchip/ts4800: Add documentation for TS-4800 interrupt controller
irq/platform-MSI: Increase the maximum MSIs the MSI framework can support
irqchip/gicv2m: Miscellaneous fixes for v2m resources and SPI ranges
irqchip/bcm2836: Make code more readable
irqchip/bcm2836: Tolerate IRQs while no flag is set in ISR
irqchip/bcm2836: Add SMP support for the 2836
irqchip/bcm2836: Fix initialization of the LOCAL_IRQ_CNT timers
irqchip/gic-v2m: acpi: Introducing GICv2m ACPI support
irqchip/gic-v2m: Refactor to prepare for ACPI support
irqdomain: Introduce is_fwnode_irqchip helper
acpi: pci: Setup MSI domain for ACPI based pci devices
genirq/msi: Export functions to allow MSI domains in modules
irqchip/mbigen: Implement the mbigen irq chip operation functions
irqchip/mbigen: Create irq domain for each mbigen device
irqchip/mgigen: Add platform device driver for mbigen device
dt-bindings: Documents the mbigen bindings
...
Linus Torvalds [Tue, 12 Jan 2016 02:06:43 +0000 (18:06 -0800)]
Merge branches 'timers-core-for-linus' and 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates - and a leftover fix - from Thomas Gleixner:
"A rather large (commit wise) update from the timer side:
- A bulk update to make compile tests work in the clocksource drivers
- An overhaul of the h8300 timers
- Some more Y2038 work
- A few overflow prevention checks in the timekeeping/ntp code
- The usual pile of fixes and improvements to the various
clocksource/clockevent drivers and core code"
Also:
"A single fix for the posix-clock poll code which did not make it into
4.4"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (84 commits)
clocksource/drivers/acpi_pm: Convert to pr_* macros
clocksource: Make clocksource validation work for all clocksources
timekeeping: Cap adjustments so they don't exceed the maxadj value
ntp: Fix second_overflow's input parameter type to be 64bits
ntp: Change time_reftime to time64_t and utilize 64bit __ktime_get_real_seconds
timekeeping: Provide internal function __ktime_get_real_seconds
clocksource/drivers/h8300: Use ioread / iowrite
clocksource/drivers/h8300: Initializer cleanup.
clocksource/drivers/h8300: Simplify delta handling
clocksource/drivers/h8300: Fix timer not overflow case
clocksource/drivers/h8300: Change to overflow interrupt
clocksource/drivers/lpc32: Correct pr_err() output format
clocksource/drivers/arm_global_timer: Fix suspend resume
clocksource/drivers/pistachio: Fix wrong calculated clocksource read value
clockevents/drivers/arm_global_timer: Use writel_relaxed in gt_compare_set
clocksource/drivers/dw_apb_timer: Inline apbt_readl and apbt_writel
clocksource/drivers/dw_apb_timer: Use {readl|writel}_relaxed in critical path
clocksource/drivers/dw_apb_timer: Fix apbt_readl return types
clocksource/drivers/tango-xtal: Replace code by clocksource_mmio_init
clocksource/drivers/h8300: Increase the compilation test coverage
...
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
posix-clock: Fix return code on the poll method's error path
Linus Torvalds [Tue, 12 Jan 2016 01:45:32 +0000 (17:45 -0800)]
Merge branch 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 platform updates from Ingo Molnar:
"Two changes:
- one to quirk-save/restore certain system MSRs across
suspend/resume, to make certain Intel systems work better
(Chen Yu)
- and also to constify a read only structure (Julia Lawall)"
* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/platform/calgary: Constify cal_chipset_ops structures
x86/pm: Introduce quirk framework to save/restore extra MSR registers around suspend/resume
- swiotlb enhancements, which fixes certain KVM emulated devices
(Igor Mammedov)
- fix an LDT related debug message (Jan Beulich)
- modularize CONFIG_X86_PTDUMP (Kees Cook)
- tone down an overly alarming warning (Laura Abbott)
- Mark variable __initdata (Rasmus Villemoes)
- PAT additions (Toshi Kani)"
* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Micro-optimise clflush_cache_range()
x86/mm/pat: Change free_memtype() to support shrinking case
x86/mm/pat: Add untrack_pfn_moved for mremap
x86/mm: Drop WARN from multi-BAR check
x86/LDT: Print the real LDT base address
x86/mm/64: Enable SWIOTLB if system has SRAT memory regions above MAX_DMA32_PFN
x86/mm: Introduce max_possible_pfn
x86/mm/ptdump: Make (debugfs)/kernel_page_tables read-only
x86/mm/mtrr: Mark the 'range_new' static variable in mtrr_calc_range_state() as __initdata
x86/mm: Turn CONFIG_X86_PTDUMP into a module
Linus Torvalds [Tue, 12 Jan 2016 00:56:38 +0000 (16:56 -0800)]
Merge branch 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fpu updates from Ingo Molnar:
"This cleans up the FPU fault handling methods to be more robust, and
moves eligible variables to .init.data"
* 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu: Put a few variables in .init.data
x86/fpu: Get rid of xstate_fault()
x86/fpu: Add an XSTATE_OP() macro
* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/vsdo: Fix build on PARAVIRT_CLOCK=y, KVM_GUEST=n
Revert "x86/kvm: On KVM re-enable (e.g. after suspend), update clocks"
x86/entry/64_compat: Make labels local
x86/platform/uv: Include clocksource.h for clocksource_touch_watchdog()
x86/vdso: Enable vdso pvclock access on all vdso variants
x86/vdso: Remove pvclock fixmap machinery
x86/vdso: Get pvclock data from the vvar VMA instead of the fixmap
x86, vdso, pvclock: Simplify and speed up the vdso pvclock reader
x86/kvm: On KVM re-enable (e.g. after suspend), update clocks
x86/entry/64: Bypass enter_from_user_mode on non-context-tracking boots
x86/asm: Add asm macros for static keys/jump labels
x86/asm: Error out if asm/jump_label.h is included inappropriately
context_tracking: Switch to new static_branch API
x86/entry, x86/paravirt: Remove the unused usergs_sysret32 PV op
x86/paravirt: Remove the unused irq_enable_sysexit pv op
x86/xen: Avoid fast syscall path for Xen PV guests
Linus Torvalds [Mon, 11 Jan 2016 23:37:06 +0000 (15:37 -0800)]
Merge branch 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 apic updates from Ingo Molnar:
"The main changes in this cycle were:
- introduce optimized single IPI sending methods on modern APICs
(Linus Torvalds, Thomas Gleixner)
- kexec/crash APIC handling fixes and enhancements (Hidehiro Kawai)
- extend lapic vector saving/restoring to the CMCI (MCE) vector as
well (Juergen Gross)
- various fixes and enhancements (Jake Oshins, Len Brown)"
* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
x86/irq: Export functions to allow MSI domains in modules
Documentation: Document kernel.panic_on_io_nmi sysctl
x86/nmi: Save regs in crash dump on external NMI
x86/apic: Introduce apic_extnmi command line parameter
kexec: Fix race between panic() and crash_kexec()
panic, x86: Allow CPUs to save registers even if looping in NMI context
panic, x86: Fix re-entrance problem due to panic on NMI
x86/apic: Fix the saving and restoring of lapic vectors during suspend/resume
x86/smpboot: Re-enable init_udelay=0 by default on modern CPUs
x86/smp: Remove single IPI wrapper
x86/apic: Use default send single IPI wrapper
x86/apic: Provide default send single IPI wrapper
x86/apic: Implement single IPI for apic_noop
x86/apic: Wire up single IPI for apic_numachip
x86/apic: Wire up single IPI for x2apic_uv
x86/apic: Implement single IPI for x2apic_phys
x86/apic: Wire up single IPI for bigsmp_apic
x86/apic: Remove pointless indirections from bigsmp_apic
x86/apic: Wire up single IPI for apic_physflat
x86/apic: Remove pointless indirections from apic_physflat
...
- scalability improvement via properly aligning a key structure field
(Jiri Olsa)
- various stop_machine() fixes (Oleg Nesterov)
- sched/numa enhancement (Rik van Riel)
- various fixes and improvements (Andi Kleen, Dietmar Eggemann,
Geliang Tang, Hiroshi Shimamoto, Joonwoo Park, Peter Zijlstra,
Waiman Long, Wanpeng Li, Yuyang Du)"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits)
sched/fair: Fix new task's load avg removed from source CPU in wake_up_new_task()
sched/core: Move sched_entity::avg into separate cache line
x86/fpu: Properly align size in CHECK_MEMBER_AT_END_OF() macro
sched/deadline: Fix the earliest_dl.next logic
sched/fair: Disable the task group load_avg update for the root_task_group
sched/fair: Move the cache-hot 'load_avg' variable into its own cacheline
sched/fair: Avoid redundant idle_cpu() call in update_sg_lb_stats()
sched/core: Move the sched_to_prio[] arrays out of line
sched/cputime: Convert vtime_seqlock to seqcount
sched/cputime: Introduce vtime accounting check for readers
sched/cputime: Rename vtime_accounting_enabled() to vtime_accounting_cpu_enabled()
sched/cputime: Correctly handle task guest time on housekeepers
sched/cputime: Clarify vtime symbols and document them
sched/cputime: Remove extra cost in task_cputime()
sched/fair: Make it possible to account fair load avg consistently
sched/fair: Modify the comment about lock assumptions in migrate_task_rq_fair()
stop_machine: Clean up the usage of the preemption counter in cpu_stopper_thread()
stop_machine: Shift the 'done != NULL' check from cpu_stop_signal_done() to callers
stop_machine: Kill cpu_stop_done->executed
stop_machine: Change __stop_cpus() to rely on cpu_stop_queue_work()
...
Linus Torvalds [Mon, 11 Jan 2016 23:07:19 +0000 (15:07 -0800)]
Merge branch 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RAS updates from Ingo Molnar:
"Various x86 MCE fixes and small enhancements"
* 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Make usable address checks Intel-only
x86/mce: Add the missing memory error check on AMD
x86/RAS: Remove mce.usable_addr
x86/mce: Do not enter deferred errors into the generic pool twice
Karl Heiss [Mon, 11 Jan 2016 13:28:43 +0000 (08:28 -0500)]
bonding: Prevent IPv6 link local address on enslaved devices
Commit 1f718f0f4f97 ("bonding: populate neighbour's private on enslave")
undoes the fix provided by commit c2edacf80e15 ("bonding / ipv6: no addrconf
for slaves separately from master") by effectively setting the slave flag
after the slave has been opened. If the slave comes up quickly enough, it
will go through the IPv6 addrconf before the slave flag has been set and
will get a link local IPv6 address.
In order to ensure that addrconf knows to ignore the slave devices on state
change, set IFF_SLAVE before dev_open() during bonding enslavement.
Fixes: 1f718f0f4f97 ("bonding: populate neighbour's private on enslave") Signed-off-by: Karl Heiss <kheiss@gmail.com> Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com> Reviewed-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 11 Jan 2016 22:48:54 +0000 (17:48 -0500)]
Merge branch 'mlx5-enhanced-flow-steering'
Or Gerlitz says:
====================
net/mlx5_core: Enhance flow steering support
v0 --> v1 changes:
- fixed improperly formatted comments.
- compare value of ib_spec->eth.mask.ether_type in network byte order
in ('IB/mlx5: Add flow steering utilities').
v1 --> v2 changes:
- made sure that service functions added in the IB driver are only static-fied
on the last commit, to make sure bisection with -Werror works fine.
v2 --> v3 changes:
- squashed patches 11 and 12 into one patch, s.t Dave's comment
on unused static functions gcc complaints during bisection is
correctly addressed.
v3 has been generated against net-next commit c9c9931 "Merge tag
'batman-adv-for-davem' of git://git.open-mesh.org/linux-merge"
The series is signed by Matan who was revently assigned to a maintainer for
the mlx5_core and IB drivers (this is a 4.5-rc1 change to the maintainers file coming
from the rdma tree) -- as such I didn't see a neeed to add my signature (Or).
This series adds three new functionalists to the driver flow-steering
infrastructure: auto-grouped flow tables, chaining of flow tables and
updates for the root flow table.
1. Auto-grouped flow tables - Flow table with auto grouping management.
When a flow table is created, hints regarding the number of rule types
and the number of rules are given in advance. Thus, a flow table is
divided into #NUM_TYPES+1 groups each contains
(#NUM_RULES)/(#NUM_TYPES+1) rules. The first #NUM_TYPES parts are groups
which are filled if the added rule matches the group specification or
the group is empty. The last part is filled by rules that can't fit
any of the former groups.
2. Chaining flow tables - Flow tables from different priorities are chained
together, if there is no match in flow table of priority i we continue
searching for a match in priority i+1. This is both true if priorities
i and i+1 belongs to the same namespace or not.
3. Updating the root flow table - the root flow table is the flow table
with the lowest level. The hardware start searching for a match in the
root flow table and continue according to the matches it find along
the way.
The first usage for the new functionality is flow steering for user-space
ConnectX-4 offloaded HW Eth RX queues done through the mlx5 IB driver.
When the mlx5 core driver is loaded, it opens three flow namespaces:
1. By-pass namespace (used by mlx5 IB driver).
2. Kernel namespace (used in order to get packets to the networking stack
through mlx5 EN driver).
3. Leftovers namespace (used by mlx5 IB and future sniffer)
Patch #2 add utility functions for finding the next and the previous
flow tables in different priorities. This is used in order to chain
the flow tables in a downstream patch.
Patch #3 introduces a firmware command for updating the root flow table.
Patch #4 introduces modify flow table firmware command, this command is used
when we want to change the next flow table of an existing flow table.
This is used for chaining flow tables as well.
Patch #5 connect/disconnect flow tables. This is actually the chaining
process when we want to link flow tables. This means that if we couldn't
find a match in the first flow table, we'll continue in the chained
flow table.
Patch #6 updates priority's attributes that is required for flow table
level allocation. We update both the max_fts (the number of allowed FTs
in the sub-tree of this priority) and the start_level (which is the first
level we'll assign to the flow-tables created inside the priority).
Patch #7 adds checking of required device capabilities. Some namespaces
could be only created if the hardware supports certain attributes.
This is especially true for the Bypass and leftovers namespaces. This
adds a generic mechanism to check these required attributes.
Patch #8 creates two additional namespaces:
a. Bypass flow rules(has nine priorities)
b. Leftovers packets(have one priority) - for unmatched packets.
Patch #9 re-factors ipv4/ipv6 match fields in the mlx5 firmware interface
header to be more clear.
Patch #10 exports the flow steering API for mlx5_ib usage
Patch #11 implements the required support in mlx5_ib in order
to support the RDMA flow steering verbs.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Maor Gottlieb [Mon, 11 Jan 2016 08:26:07 +0000 (10:26 +0200)]
IB/mlx5: Add flow steering support
Adding flow steering support by creating a flow-table per
priority (if rules exist in the priority). mlx5_ib uses
autogrouping and thus only creates the required destinations.
Also includes adding of these flow steering utilities
2. Check if flow is multicast - this is required in order to decide
to which flow table will we add the steering rule.
3. Set outer headers in flow match criteria to zeros.
Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Maor Gottlieb [Mon, 11 Jan 2016 08:26:06 +0000 (10:26 +0200)]
net/mlx5_core: Export flow steering API
Add exports to flow steering API for mlx5_ib usage.
The following functions are exported:
1. mlx5_create_auto_grouped_flow_table - used to create flow
table with auto flow grouping management (create and destroy
flow groups). In auto-grouped flow tables, we create groups
automatically if needed (if we don't find an existing
flow group with same match criteria when we add new rule).
2. mlx5_destroy_flow_table - used to destroy a flow table.
3. mlx5_add_flow_rule - used to add flow rule into a flow table.
4. mlx5_del_flow_rule - used to delete flow rule from its flow table.
5. mlx5_get_flow_namespace - used to get a handle to the required
namespace sub-tree.
Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Maor Gottlieb [Mon, 11 Jan 2016 08:26:05 +0000 (10:26 +0200)]
net/mlx5_core: Make ipv4/ipv6 location more clear
Change the mlx5 firmware interface header to make it
more clear which bytes should be used by IPv4 or
IPv6 addresses.
Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Maor Gottlieb [Mon, 11 Jan 2016 08:26:04 +0000 (10:26 +0200)]
net/mlx5_core: Enable flow steering support for the IB driver
When the driver is loaded, we create flow steering namespace
for kernel bypass with nine priorities and another namespace
for leftovers(in order to catch packets that weren't matched).
Verbs applications will use these priorities.
we found nine as a number that balances the requirements from the
user and retains performance.
The bypass namespace is used by verbs applications that want to bypass
the kernel networking stack. The leftovers namespace is used by verbs
applications and the sniffer in order to catch packets that weren't
handled by any preceding rules.
Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Maor Gottlieb [Mon, 11 Jan 2016 08:26:03 +0000 (10:26 +0200)]
net/mlx5_core: Initialize namespaces only when supported by device
Before we create the sub tree of a steering namespaces(kernel, bypass,
leftovers) we check that the device has the required capabilities
in order to create this subtree.
Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Maor Gottlieb [Mon, 11 Jan 2016 08:26:02 +0000 (10:26 +0200)]
net/mlx5_core: Set priority attributes
Each priority has two attributes:
1. max_ft - maximum allowed flow tables under this priority.
2. start_level - start level range of the flow tables
in the priority.
These attributes are set by traversing the tree nodes by
DFS and set start level and max flow tables to each priority.
Start level depends on the max flow tables of the prior priorities
in the tree.
The leaves of the trees have max_ft set in them. Each node accumulates
the max_ft of its children and set it accordingly.
Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Maor Gottlieb [Mon, 11 Jan 2016 08:26:01 +0000 (10:26 +0200)]
net/mlx5_core: Connect flow tables
Flow tables from different priorities should be chained together.
When a packet arrives we search for a match in the
by-pass flow tables (first we search for a match in priority 0
and if we don't find a match we move to the next priority).
If we can't find a match in any of the bypass flow-tables, we continue
searching in the flow-tables of the next priority, which are the
kernel's flow tables.
Setting the miss flow table in a new flow table to be the next one in
the list is performed via create flow table API. If we want to change an
existing flow table, for example in order to point from an
existing flow table to the new next-in-list flow table, we use the
modify flow table API.
Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce the modify flow table command. This command is used when
we want to change the next flow table of an existing flow table.
The next flow table is defined as the table we search (in order
to find a match), if we couldn't find a match in any of the flow table
entries in the current flow table.
Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Maor Gottlieb [Mon, 11 Jan 2016 08:25:59 +0000 (10:25 +0200)]
net/mlx5_core: Managing root flow table
The root Flow Table for each Flow Table Type is defined,
by default, as the Flow Table with level 0.
In order not to use an empty flow tables and introduce new hops,
but still preserve space for flow-tables that have a priority
greater(lower number) than the current flow table, we introduce this
new set root flow table command.
This command tells the HW to start matching packets from the
assigned root flow table.
This command is used when we create new flow table with level lower than the
current lowest flow table or it is the first flow table.
Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Maor Gottlieb [Mon, 11 Jan 2016 08:25:58 +0000 (10:25 +0200)]
net/mlx5_core: Add utilities to find next and prev flow-tables
Add two utility functions for find next and prev flow table.
Find next flow table function gets priority and return the
first flow table of the next priority in the tree.
Find prev flow table return the last flow table of
the previous priority in the tree.
These utility functions are used for chaining flow table from different
priorities.
Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
When user add rule to autogrouped flow table, we search
for flow group with the same match criteria, if we don't
find such group then we create new flow group with the
required match criteria and insert the rule to this group.
We divide the flow table into required_groups + 1,
in order to reserve a part of the flow table for rules
which don't match any existing group.
Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Michal Kubeček [Mon, 11 Jan 2016 06:50:30 +0000 (07:50 +0100)]
udp: disallow UFO for sockets with SO_NO_CHECK option
Commit acf8dd0a9d0b ("udp: only allow UFO for packets from SOCK_DGRAM
sockets") disallows UFO for packets sent from raw sockets. We need to do
the same also for SOCK_DGRAM sockets with SO_NO_CHECK options, even if
for a bit different reason: while such socket would override the
CHECKSUM_PARTIAL set by ip_ufo_append_data(), gso_size is still set and
bad offloading flags warning is triggered in __skb_gso_segment().
In the IPv6 case, SO_NO_CHECK option is ignored but we need to disallow
UFO for packets sent by sockets with UDP_NO_CHECK6_TX option.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Tested-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
John Fastabend [Mon, 11 Jan 2016 05:38:44 +0000 (21:38 -0800)]
net: pktgen: fix null ptr deref in skb allocation
Fix possible null pointer dereference that may occur when calling
skb_reserve() on a null skb.
Fixes: 879c7220e82 ("net: pktgen: Observe needed_headroom of the device") Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
- Introduce the 'perf stat record/report' workflow:
Generate perf.data files from 'perf stat', to tap into the
scripting capabilities perf has instead of defining a 'perf stat'
specific scripting support to calculate event ratios, etc.
An effort was made to make perf.data files generated like this to
not generate cryptic messages when processed by older tools.
The 'perf script' bits need rebasing, will go up later.
- Make command line options always available, even when they depend
on some feature being enabled, warning the user about use of such
options (Wang Nan)
- Support hw breakpoint events (mem:0xAddress) in the default output
mode in 'perf script' (Wang Nan)
- Fixes and improvements for supporting annotating ARM binaries,
support ARM call and jump instructions, more work needed to have
arch specific stuff separated into tools/perf/arch/*/annotate/
(Russell King)
- Add initial 'perf config' command, for now just with a --list
command to the contents of the configuration file in use and a
basic man page describing its format, commands for doing edits and
detailed documentation are being reviewed and proof-read. (Taeung
Song)
- Allows BPF scriptlets specify arguments to be fetched using DWARF
info, using a prologue generated at compile/build time (He Kuang,
Wang Nan)
- Allow attaching BPF scriptlets to module symbols (Wang Nan)
- Allow attaching BPF scriptlets to userspace code using uprobe (Wang
Nan)
- BPF programs now can specify 'perf probe' tunables via its section
name, separating key=val values using semicolons (Wang Nan)
Testing some of these new BPF features:
Use case: get callchains when receiving SSL packets, filter then in the
kernel, at arbitrary place.
- Use 'perf probe' various options to list functions, see what
variables can be collected at any given point, experiment first
collecting without a filter, then filter, use it together with
'perf trace', 'perf top', with or without callchains, if it
explodes, please tell us!
- Introduce a new callchain mode: "folded", that will list per line
representations of all callchains for a give histogram entry,
facilitating 'perf report' output processing by other tools, such
as Brendan Gregg's flamegraph tools (Namhyung Kim)
The user can also select one of "count", "period" or "percent" as
the first column.
... and lots of infrastructure enhancements, plus fixes and other
changes, features I failed to list - see the shortlog and the git log
for details"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (271 commits)
perf evlist: Add --trace-fields option to show trace fields
perf record: Store data mmaps for dwarf unwind
perf libdw: Check for mmaps also in MAP__VARIABLE tree
perf unwind: Check for mmaps also in MAP__VARIABLE tree
perf unwind: Use find_map function in access_dso_mem
perf evlist: Remove perf_evlist__(enable|disable)_event functions
perf evlist: Make perf_evlist__open() open evsels with their cpus and threads (like perf record does)
perf report: Show random usage tip on the help line
perf hists: Export a couple of hist functions
perf diff: Use perf_hpp__register_sort_field interface
perf tools: Add overhead/overhead_children keys defaults via string
perf tools: Remove list entry from struct sort_entry
perf tools: Include all tools/lib directory for tags/cscope/TAGS targets
perf script: Align event name properly
perf tools: Add missing headers in perf's MANIFEST
perf tools: Do not show trace command if it's not compiled in
perf report: Change default to use event group view
perf top: Decay periods in callchains
tools lib: Move bitmap.[ch] from tools/perf/ to tools/{lib,include}/
tools lib: Sync tools/lib/find_bit.c with the kernel
...
David S. Miller [Mon, 11 Jan 2016 22:32:56 +0000 (17:32 -0500)]
Merge branch 'bpf-next'
Daniel Borkmann says:
====================
BPF update
This set adds IPv6 support for bpf_skb_{set,get}_tunnel_key() helper.
It also exports flags to user space that are being used in helpers and
weren't exported thus far. For more details, please see the individual
patches.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Mon, 11 Jan 2016 00:16:39 +0000 (01:16 +0100)]
bpf: support ipv6 for bpf_skb_{set,get}_tunnel_key
After IPv6 support has recently been added to metadata dst and related
encaps, add support for populating/reading it from an eBPF program.
Commit d3aa45ce6b ("bpf: add helpers to access tunnel metadata") started
with initial IPv4-only support back then (due to IPv6 metadata support
not being available yet).
To stay compatible with older programs, we need to test for the passed
structure size. Also TOS and TTL support from the ip_tunnel_info key has
been added. Tested with vxlan devs in collect meta data mode with IPv4,
IPv6 and in compat mode over different network namespaces.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Mon, 11 Jan 2016 00:16:38 +0000 (01:16 +0100)]
bpf: export helper function flags and reject invalid ones
Export flags used by eBPF helper functions through UAPI, so they can be
used by programs (instead of them redefining all flags each time or just
using the hard-coded values). It also gives a better overview what flags
are used where and we can further get rid of the extra macros defined in
filter.c. Moreover, reject invalid flags.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 11 Jan 2016 22:31:10 +0000 (17:31 -0500)]
Merge branch 'renesas-eth-fixes'
Sergei Shtylyov says:
====================
Fix some dubious code in the Renesas Ethernet drivers
Here's a set of 2 patches against DaveM's 'net.git' repo. While initializing
EMAC the code tries to respect the duplex mode both programmed into ECMR and
stored in its own private data -- this just can't be right.
[1/2] ravb: stop reading ECMR in ravb_emac_init()
[2/2] sh_eth: stop reading ECMR in sh_eth_dev_init()
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
projects / linux-beck.git / log