]> git.karo-electronics.de Git - linux-beck.git/log
linux-beck.git
15 years agoPCI hotplug: fix lock imbalance in pciehp
Jiri Slaby [Sat, 17 Jan 2009 15:23:55 +0000 (16:23 +0100)]
PCI hotplug: fix lock imbalance in pciehp

set_lock_status omits mutex_unlock in fail path. Add the omitted
unlock.

As a result a lockup caused by this can be triggered from userspace
by writing 1 to /sys/bus/pci/slots/.../lock often enough.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
15 years agoPCI PM: Restore standard config registers of all devices early
Rafael J. Wysocki [Fri, 16 Jan 2009 20:54:43 +0000 (21:54 +0100)]
PCI PM: Restore standard config registers of all devices early

There is a problem in our handling of suspend-resume of PCI devices that
many of them have their standard config registers restored with
interrupts enabled and they are put into the full power state with
interrupts enabled as well.  This may lead to the following scenario:
  * an interrupt vector is shared between two or more devices
  * one device is resumed earlier and generates an interrupt
  * the interrupt handler of another device tries to handle it and
    attempts to access the device the config space of which hasn't been
    restored yet and/or which still is in a low power state
  * the system crashes as a result

To prevent this from happening we should restore the standard
configuration registers of all devices with interrupts disabled and we
should put them into the D0 power state right after that.
Unfortunately, this cannot be done using the existing
pci_set_power_state(), because it can sleep.  Also, to do it we have to
make sure that the config spaces of all devices were actually saved
during suspend.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
15 years agoPCI/MSI: bugfix/utilize for msi_capability_init()
Hidetoshi Seto [Wed, 24 Dec 2008 08:27:04 +0000 (17:27 +0900)]
PCI/MSI: bugfix/utilize for msi_capability_init()

This patch fix a following bug and does a cleanup.

bug:
commit 5993760f7fc75b77e4701f1e56dc84c0d6cf18d5
had a wrong change (since is_64 is boolean[0|1]):

-               pci_write_config_dword(dev,
-                       msi_mask_bits_reg(pos, is_64bit_address(control)),
-                       maskbits);
+               pci_write_config_dword(dev, entry->msi_attrib.is_64, maskbits);

utilize:
Unify separated if (entry->msi_attrib.maskbit) statements.

Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Acked-by: "Jike Song" <albcamus@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
15 years agoMerge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Linus Torvalds [Fri, 16 Jan 2009 16:41:09 +0000 (08:41 -0800)]
Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  serial: Add 16850 uart type support to OF uart driver
  hvc_console: Remove tty->low_latency
  powerpc: Get the number of SLBs from "slb-size" property
  powerpc: is_hugepage_only_range() must account for both 4kB and 64kB slices
  powerpc/ps3: printing fixups for l64 to ll64 conversion drivers/video
  powerpc/ps3: Printing fixups for l64 to ll64 conversion drivers/scsi
  powerpc/ps3: Printing fixups for l64 to ll64 conversion drivers/ps3
  powerpc/ps3: Printing fixups for l64 to ll64 conversion sound/ppc
  powerpc/ps3: Printing fixups for l64 to ll64 conversion drivers/char
  powerpc/ps3: Printing fixups for l64 to ll64 conversion drivers/block
  powerpc/ps3: Printing fixups for l64 to ll64 conversion arch/powerpc
  powerpc/ps3: ps3_repository_read_mm_info() takes u64 * arguments
  powerpc/ps3: clear_bit()/set_bit() operate on unsigned longs
  powerpc/ps3: The lv1_ routines have u64 parameters
  powerpc/ps3: Use dma_addr_t down through the stack
  powerpc/ps3: set_dabr() takes an unsigned long
  powerpc: Cleanup from l64 to ll64 change drivers/scsi

15 years agoMerge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzi...
Linus Torvalds [Fri, 16 Jan 2009 16:40:57 +0000 (08:40 -0800)]
Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  sata_fsl: Return non-zero on error in probe()
  drivers/ata/pata_ali.c: s/isa_bridge/ali_isa_bridge/ to fix alpha build
  libata: New driver for OCTEON SOC Compact Flash interface (v7).
  libata: Add another column to the ata_timing table.
  sata_via: Add VT8261 support
  pata_atiixp: update port enabledness test handling
  [libata] get-identity ioctl: Fix use of invalid memory pointer

15 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6
Linus Torvalds [Fri, 16 Jan 2009 16:40:40 +0000 (08:40 -0800)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
  [SCSI] Skip deleted devices in __scsi_device_lookup_by_target()
  [SCSI] Add SUN Universal Xport to no attach blacklist
  [SCSI] iscsi_tcp: make padbuf non-static
  [SCSI] mpt fusion: Add Firmware debug support
  [SCSI] mpt fusion: Add separate msi enable disable for FC,SPI,SAS
  [SCSI] mpt fusion: Update MPI Headers to version 01.05.19
  [SCSI] qla2xxx: Fix ISP restart bug in multiq code

15 years agoMerge branch 'drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied...
Linus Torvalds [Fri, 16 Jan 2009 16:39:52 +0000 (08:39 -0800)]
Merge branch 'drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6

* 'drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/i915: lock correct mutex around object unreference.
  drm/i915: add support for physical memory objects
  drm/i915: make LVDS fixed mode a preferred mode
  drm: handle depth & bpp changes correctly
  drm: initial KMS config fixes
  drm/i915: setup sarea properly in master_priv
  drm/i915: set vblank enabled flag correctly across IRQ install/uninstall
  drm/i915: don't enable vblanks on disabled pipes

15 years agoRevert "PCI PM: Register power state of devices during initialization"
Linus Torvalds [Fri, 16 Jan 2009 16:14:51 +0000 (08:14 -0800)]
Revert "PCI PM: Register power state of devices during initialization"

This reverts commit 98e6e286d7b01deb7453b717aa38ebb69d6cefc0, as Yinghai
Lu reports that it breaks kexec with at least the e1000 and e1000e
drivers.  The reason is that the shutdown sequence puts the hardware
into D3 sleep, and the commit causes us to claim that it then is in D0
(running) state just because we don't understand the PM capabilities.

Which then later makes "pci_set_power_state()" not do anything, and the
device never wakes up properly and just returns 0xff to everything.

Reported-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: From: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Jesse Barnes <jesse.barnes@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agosata_fsl: Return non-zero on error in probe()
Michal Sojka [Wed, 14 Jan 2009 13:02:38 +0000 (14:02 +0100)]
sata_fsl: Return non-zero on error in probe()

while I was looking over kernel sources I've found this small bug.

Formerly, zero was returned even if an error happened.

Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
15 years agodrivers/ata/pata_ali.c: s/isa_bridge/ali_isa_bridge/ to fix alpha build
Andrew Morton [Thu, 15 Jan 2009 00:48:42 +0000 (16:48 -0800)]
drivers/ata/pata_ali.c: s/isa_bridge/ali_isa_bridge/ to fix alpha build

drivers/ata/pata_ali.c:44: error: static declaration of 'isa_bridge' follows non-static declaration
arch/alpha/include/asm/pci.h:274: error: previous declaration of 'isa_bridge' was here

Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
15 years agolibata: New driver for OCTEON SOC Compact Flash interface (v7).
David Daney [Fri, 16 Jan 2009 01:45:32 +0000 (17:45 -0800)]
libata: New driver for OCTEON SOC Compact Flash interface (v7).

Cavium OCTEON processor support was recently merged, so now we have
this CF driver for your consideration.

Most OCTEON variants have *no* DMA or interrupt support on the CF
interface so for these, only PIO is supported.  Although if DMA is
available, we do take advantage of it.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
15 years agolibata: Add another column to the ata_timing table.
David Daney [Fri, 16 Jan 2009 01:45:31 +0000 (17:45 -0800)]
libata: Add another column to the ata_timing table.

The forthcoming OCTEON SOC Compact Flash driver needs an additional
timing value that was not available in the ata_timing table.  I add a
new column for dmack_hold time.  The values were obtained from the
Compact Flash specification Rev 4.1.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
15 years agosata_via: Add VT8261 support
JosephChan@via.com.tw [Fri, 16 Jan 2009 11:44:55 +0000 (19:44 +0800)]
sata_via: Add VT8261 support

Signed-off-by: Joseph Chan <josephchan@via.com.tw>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
15 years agopata_atiixp: update port enabledness test handling
Tejun Heo [Fri, 16 Jan 2009 06:27:27 +0000 (15:27 +0900)]
pata_atiixp: update port enabledness test handling

Port enabledness test fits much better into init_one() instead of
pre_reset().  The reason why these tests are in pre_reset() is purely
historical at this point.  Move it to init_one().  This will help
further changes.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
15 years ago[libata] get-identity ioctl: Fix use of invalid memory pointer
Jeff Garzik [Fri, 16 Jan 2009 15:17:09 +0000 (10:17 -0500)]
[libata] get-identity ioctl: Fix use of invalid memory pointer
for SAS drivers.

Caught by Ke Wei (and team?) at Marvell.

Also, move the ata_scsi_ioctl export to libata-scsi.c, as that seems to be the
general trend.

Acked-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
15 years agodrm/i915: lock correct mutex around object unreference.
Dave Airlie [Thu, 15 Jan 2009 04:03:07 +0000 (14:03 +1000)]
drm/i915: lock correct mutex around object unreference.

This makes sure the mutex is held around the unreference.

Signed-off-by: Dave Airlie <airlied@redhat.com>
15 years agodrm/i915: add support for physical memory objects
Dave Airlie [Tue, 30 Dec 2008 10:31:46 +0000 (20:31 +1000)]
drm/i915: add support for physical memory objects

This is an initial patch to do support for objects which needs physical
contiguous main ram, cursors and overlay registers on older chipsets.

These objects are bound on cursor bin, like pinning, and we copy
the data to/from the backing store object into the real one on attach/detach.

notes:
possible over the top in attach/detach operations.
no overlay support yet.

Signed-off-by: Dave Airlie <airlied@redhat.com>
15 years agodrm/i915: make LVDS fixed mode a preferred mode
Jesse Barnes [Wed, 14 Jan 2009 18:53:36 +0000 (10:53 -0800)]
drm/i915: make LVDS fixed mode a preferred mode

The detected fixed panel mode really is preferred, so mark it as such and
add it to the LVDS connector mode list.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@linux.ie>
15 years agodrm: handle depth & bpp changes correctly
Jesse Barnes [Fri, 9 Jan 2009 21:56:14 +0000 (13:56 -0800)]
drm: handle depth & bpp changes correctly

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@linux.ie>
15 years agodrm: initial KMS config fixes
Jesse Barnes [Mon, 12 Jan 2009 20:05:32 +0000 (12:05 -0800)]
drm: initial KMS config fixes

When mode setting is first initialized, the driver will call into
drm_helper_initial_config() to set up an initial output and framebuffer
configuration.  This routine is responsible for probing the available
connectors, encoders, and crtcs, looking for modes and putting together
something reasonable (where reasonable is defined as "allows kernel
messages to be visible on as many displays as possible").

However, the code was a bit too aggressive in setting default modes when
none were found on a given connector.  Even if some connectors had modes,
any connectors found lacking modes would have the default 800x600 mode added
to their mode list, which in some cases could cause problems later down the
line.  In my case, the LVDS was perfectly available, but the initial config
code added 800x600 modes to both of the detected but unavailable HDMI
connectors (which are on my non-existent docking station).  This ended up
preventing later code from setting a mode on my LVDS, which is bad.

This patch fixes that behavior by making the initial config code walk
through the connectors first, counting the available modes, before it decides
to add any default modes to a possibly connected output.  It also fixes the
logic in drm_target_preferred() that was causing zeroed out modes to be set
as the preferred mode for a given connector, even if no modes were available.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@linux.ie>
15 years agoserial: Add 16850 uart type support to OF uart driver
Matthias Fuchs [Thu, 15 Jan 2009 09:43:35 +0000 (09:43 +0000)]
serial: Add 16850 uart type support to OF uart driver

This patch adds support for "ns16850" as supported value
of the compatible node in flat device tree uart descriptions.

This is needed for example when you have a XR16C2850 uart
connected to a PPC405's external bus controller.

Signed-off-by: Matthias Fuchs <mfuchs@ma-fu.de>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
15 years agohvc_console: Remove tty->low_latency
Hendrik Brueckner [Wed, 14 Jan 2009 23:15:44 +0000 (23:15 +0000)]
hvc_console: Remove tty->low_latency

This patch removes the tty->low_latency setting.

For irq based hvc_console backends the tty->low_latency must be set to 0,
because the tty_flip_buffer_push() function must not be called from IRQ context
(see drivers/char/tty_buffer.c).

For polled backends, the low_latency setting causes the bug trace below, because
tty_flip_buffer_push() is called within an atomic context and subsequent calls
might sleep due to mutex_lock.

BUG: sleeping function called from invalid context at /root/cvs/linux-2.6.git/kernel/mutex.c:207
in_atomic(): 1, irqs_disabled(): 0, pid: 748, name: khvcd
1 lock held by khvcd/748:
 #0:  (hvc_structs_lock){--..}, at: [<00000000002ceb50>] khvcd+0x58/0x12c
CPU: 0 Not tainted 2.6.29-rc1git #29
Process khvcd (pid: 748, task: 000000002fb9a480, ksp: 000000002f66bd78)
070000000000000a 000000002f66ba00 0000000000000002 (null)
       000000002f66baa0 000000002f66ba18 000000002f66ba18 0000000000104f08
       ffffffffffffc000 000000002f66bd78 (null) (null)
       000000002f66ba00 000000000000000c 000000002f66ba00 000000002f66ba70
       0000000000466af8 0000000000104f08 000000002f66ba00 000000002f66ba50
Call Trace:
([<0000000000104e7c>] show_trace+0x138/0x158)
 [<0000000000104f62>] show_stack+0xc6/0xf8
 [<0000000000105740>] dump_stack+0xb0/0xc0
 [<000000000013144a>] __might_sleep+0x14e/0x17c
 [<000000000045e226>] mutex_lock_nested+0x42/0x3b4
 [<00000000002c443e>] echo_char_raw+0x3a/0x9c
 [<00000000002c688c>] n_tty_receive_buf+0x1154/0x1208
 [<00000000002ca0a2>] flush_to_ldisc+0x152/0x220
 [<00000000002ca1da>] tty_flip_buffer_push+0x6a/0x90
 [<00000000002cea74>] hvc_poll+0x244/0x2c8
 [<00000000002ceb68>] khvcd+0x70/0x12c
 [<000000000015bbd0>] kthread+0x68/0xa0
 [<0000000000109d5a>] kernel_thread_starter+0x6/0xc
 [<0000000000109d54>] kernel_thread_starter+0x0/0xc
1 lock held by khvcd/748:
 #0:  (hvc_structs_lock){--..}, at: [<00000000002ceb50>] khvcd+0x58/0x12c

Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
15 years agopowerpc: Get the number of SLBs from "slb-size" property
Michael Neuling [Wed, 14 Jan 2009 13:42:41 +0000 (13:42 +0000)]
powerpc: Get the number of SLBs from "slb-size" property

The PAPR says that the property for specifying the number of SLBs should
be called "slb-size".  We currently only look for "ibm,slb-size" because
this is what firmware actually presents.

This patch makes us look for the "slb-size" property as well and in
preference to the "ibm,slb-size".  This should future proof us if
firmware changes to match PAPR.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
15 years agopowerpc: is_hugepage_only_range() must account for both 4kB and 64kB slices
Dave Kleikamp [Wed, 14 Jan 2009 09:09:34 +0000 (09:09 +0000)]
powerpc: is_hugepage_only_range() must account for both 4kB and 64kB slices

powerpc: is_hugepage_only_range() must account for both 4kB and 64kB slices

The subpage_prot syscall fails on second and subsequent calls for a given
region, because is_hugepage_only_range() is mis-identifying the 4 kB
slices when the process has a 64 kB page size.

Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
15 years agopowerpc/ps3: printing fixups for l64 to ll64 conversion drivers/video
Stephen Rothwell [Tue, 13 Jan 2009 20:13:39 +0000 (20:13 +0000)]
powerpc/ps3: printing fixups for l64 to ll64 conversion drivers/video

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
15 years agopowerpc/ps3: Printing fixups for l64 to ll64 conversion drivers/scsi
Stephen Rothwell [Tue, 13 Jan 2009 20:11:44 +0000 (20:11 +0000)]
powerpc/ps3: Printing fixups for l64 to ll64 conversion drivers/scsi

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
15 years agopowerpc/ps3: Printing fixups for l64 to ll64 conversion drivers/ps3
Stephen Rothwell [Tue, 13 Jan 2009 20:10:06 +0000 (20:10 +0000)]
powerpc/ps3: Printing fixups for l64 to ll64 conversion drivers/ps3

Also some min -> mint_t conversion.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
15 years agopowerpc/ps3: Printing fixups for l64 to ll64 conversion sound/ppc
Stephen Rothwell [Tue, 13 Jan 2009 20:07:55 +0000 (20:07 +0000)]
powerpc/ps3: Printing fixups for l64 to ll64 conversion sound/ppc

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
15 years agopowerpc/ps3: Printing fixups for l64 to ll64 conversion drivers/char
Stephen Rothwell [Tue, 13 Jan 2009 20:06:02 +0000 (20:06 +0000)]
powerpc/ps3: Printing fixups for l64 to ll64 conversion drivers/char

Also a couple of min -> min_t changes.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
15 years agopowerpc/ps3: Printing fixups for l64 to ll64 conversion drivers/block
Stephen Rothwell [Tue, 13 Jan 2009 20:04:48 +0000 (20:04 +0000)]
powerpc/ps3: Printing fixups for l64 to ll64 conversion drivers/block

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
15 years agopowerpc/ps3: Printing fixups for l64 to ll64 conversion arch/powerpc
Stephen Rothwell [Tue, 13 Jan 2009 20:02:39 +0000 (20:02 +0000)]
powerpc/ps3: Printing fixups for l64 to ll64 conversion arch/powerpc

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
15 years agopowerpc/ps3: ps3_repository_read_mm_info() takes u64 * arguments
Stephen Rothwell [Tue, 13 Jan 2009 20:01:28 +0000 (20:01 +0000)]
powerpc/ps3: ps3_repository_read_mm_info() takes u64 * arguments

Fixes compiler warnings:

arch/powerpc/platforms/ps3/mm.c:1205: warning: passing argument 2 of 'ps3_repository_read_mm_info' from incompatible pointer type
arch/powerpc/platforms/ps3/mm.c:1205: warning: passing argument 3 of 'ps3_repository_read_mm_info' from incompatible pointer type

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
15 years agopowerpc/ps3: clear_bit()/set_bit() operate on unsigned longs
Stephen Rothwell [Tue, 13 Jan 2009 20:00:29 +0000 (20:00 +0000)]
powerpc/ps3: clear_bit()/set_bit() operate on unsigned longs

This fixes these compiler warning:

arch/powerpc/platforms/ps3/interrupt.c:109: warning: passing argument 2 of 'clear_bit' from incompatible pointer type
arch/powerpc/platforms/ps3/interrupt.c:130: warning: passing argument 2 of 'set_bit' from incompatible pointer type

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
15 years agopowerpc/ps3: The lv1_ routines have u64 parameters
Stephen Rothwell [Tue, 13 Jan 2009 19:59:41 +0000 (19:59 +0000)]
powerpc/ps3: The lv1_ routines have u64 parameters

We just fix up the reference parameters as the others are dealt with by
arithmetic promotion rules and don't cause warnings.

This removes warnings like this:

arch/powerpc/platforms/ps3/interrupt.c:327: warning: passing argument 1 of 'lv1_construct_event_receive_port' from incompatible pointer type

Also, these:

drivers/ps3/ps3-vuart.c:462: warning: passing argument 4 of 'ps3_vuart_raw_read' from incompatible pointer type
drivers/ps3/ps3-vuart.c:592: warning: passing argument 4 of 'ps3_vuart_raw_read' from incompatible pointer type

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
15 years agopowerpc/ps3: Use dma_addr_t down through the stack
Stephen Rothwell [Tue, 13 Jan 2009 19:58:10 +0000 (19:58 +0000)]
powerpc/ps3: Use dma_addr_t down through the stack

Push the dma_addr_t type usage all the way down to where the actual
values are manipulated.

Now that u64 is "unsigned long long", this removes warnings like:

arch/powerpc/platforms/ps3/system-bus.c:532: warning: passing argument 4 of 'ps3_dma_map' from incompatible pointer type
arch/powerpc/platforms/ps3/system-bus.c:649: warning: passing argument 4 of 'ps3_dma_map' from incompatible pointer type

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
15 years agopowerpc/ps3: set_dabr() takes an unsigned long
Stephen Rothwell [Tue, 13 Jan 2009 19:54:50 +0000 (19:54 +0000)]
powerpc/ps3: set_dabr() takes an unsigned long

Also silences this warning:

arch/powerpc/platforms/ps3/setup.c:275: warning: initialization from incompatible pointer type

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
15 years agopowerpc: Cleanup from l64 to ll64 change drivers/scsi
Stephen Rothwell [Tue, 6 Jan 2009 14:59:00 +0000 (14:59 +0000)]
powerpc: Cleanup from l64 to ll64 change drivers/scsi

This is a powerpc specific driver.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
15 years agoMerge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 16 Jan 2009 00:55:00 +0000 (16:55 -0800)]
Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: sched_slice() fixlet
  sched: fix update_min_vruntime
  sched: SCHED_OTHER vs SCHED_IDLE isolation
  sched: SCHED_IDLE weight change
  sched: fix bandwidth validation for UID grouping
  Revert "sched: improve preempt debugging"

15 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6
Linus Torvalds [Fri, 16 Jan 2009 00:53:42 +0000 (16:53 -0800)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc64: Fix UP build failure.

15 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Fri, 16 Jan 2009 00:53:15 +0000 (16:53 -0800)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (95 commits)
  b44: GFP_DMA skb should not escape from driver
  korina: do not use IRQF_SHARED with IRQF_DISABLED
  korina: do not stop queue here
  korina: fix handling tx_chain_tail
  korina: do tx at the right position
  korina: do schedule napi after testing for it
  korina: rework korina_rx() for use with napi
  korina: disable napi on close and restart
  korina: reset resource buffer size to 1536
  korina: fix usage of driver_data
  bnx2x: First slow path interrupt race
  bnx2x: MTU Filter
  bnx2x: Indirection table initialization index
  bnx2x: Missing brackets
  bnx2x: Fixing the doorbell size
  bnx2x: Endianness issues
  bnx2x: VLAN tagged packets without VLAN offload
  bnx2x: Protecting the link change indication
  bnx2x: Flow control updated before reporting the link
  bnx2x: Missing mask when calculating flow control
  ...

15 years agoMerge branch 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6
Linus Torvalds [Fri, 16 Jan 2009 00:40:12 +0000 (16:40 -0800)]
Merge branch 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6

* 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
  hwmon: (abituguru3) Fix CONFIG_DMI=n fallback to probe
  hwmon: (abituguru3) Enable DMI probing feature on IN9 32X MAX
  hwmon: (abituguru3) Match partial DMI board name strings
  hwmon: Add a driver for the ADT7475 hardware monitoring chip
  hwmon: (k8temp) Fix temperature reporting for (most) K8 RevG CPUs
  hwmon: (k8temp) Fix wrong sensor selection for AMD K8 RevF/RevG CPUs
  hwmon: (k8temp) Warn about fam F rev F errata

15 years ago9p: disallow RDMA if RDMA CM isn't available
Roland Dreier [Thu, 15 Jan 2009 21:51:29 +0000 (13:51 -0800)]
9p: disallow RDMA if RDMA CM isn't available

If INET=y and INFINIBAND=y, but IPV6=m then INFINIBAND_ADDR_TRANS is set
to n and the RDMA CM functions rdma_connect() et al are not built.
However, the current config dependencies allow NET_9P_RDMA to be selected
in this, which leads to a build failure.  Fix this by adding a dependency
on INFINIBAND_ADDR_TRANS to disallow NET_9P_RDMA in this case.

Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Tested-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoext2: also update the inode on disk when dir is IS_DIRSYNC
Jan Kara [Thu, 15 Jan 2009 21:51:29 +0000 (13:51 -0800)]
ext2: also update the inode on disk when dir is IS_DIRSYNC

We used to just write changed page for IS_DIRSYNC inodes.  But we also
have to update the directory inode itself just for the case that we've
allocated a new block and changed i_size.

[akpm@linux-foundation.org: still sync the data page]
Signed-off-by: Jan Kara <jack@suse.cz>
Tested-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agodrivers/usb/core/hub.c: fix CONFIG_USB_OTG=y build
David Brownell [Thu, 15 Jan 2009 21:51:28 +0000 (13:51 -0800)]
drivers/usb/core/hub.c: fix CONFIG_USB_OTG=y build

Carry out the PM-routine interface change in the USB OTG pathway.  This
was omitted from the earlier interface-change patch by mistake.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: Greg KH <greg@kroah.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Felipe Balbi <felipe.balbi@nokia.com>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoinclude of <linux/types.h> is preferred over <asm/types.h>
Jaswinder Singh Rajput [Thu, 15 Jan 2009 21:51:26 +0000 (13:51 -0800)]
include of <linux/types.h> is preferred over <asm/types.h>

Impact: fix 15 make headers_check warnings:

include of <linux/types.h> is preferred over <asm/types.h>

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agomemcg: fix a race when setting memory.swappiness
Li Zefan [Thu, 15 Jan 2009 21:51:26 +0000 (13:51 -0800)]
memcg: fix a race when setting memory.swappiness

(suppose: memcg->use_hierarchy == 0 and memcg->swappiness == 60)

echo 10 > /memcg/0/swappiness   |
  mem_cgroup_swappiness_write() |
    ...                         | echo 1 > /memcg/0/use_hierarchy
                                | mkdir /mnt/0/1
                                |   sub_memcg->swappiness = 60;
    memcg->swappiness = 10;     |

In the above scenario, we end up having 2 different swappiness
values in a single hierarchy.

We should hold cgroup_lock() when cheking cgrp->children list.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Paul Menage <menage@google.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agomemcg: fix section mismatch
Li Zefan [Thu, 15 Jan 2009 21:51:25 +0000 (13:51 -0800)]
memcg: fix section mismatch

At system boot when creating the top cgroup, mem_cgroup_create() calls
enable_swap_cgroup() which is marked as __init, so mark
mem_cgroup_create() as __ref to avoid false section mismatch warning.

Reported-by: Rakib Mullick <rakib.mullick@gmail.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by; KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agohp_accel: do not call ACPI from invalid context
Pavel Machek [Thu, 15 Jan 2009 21:51:24 +0000 (13:51 -0800)]
hp_accel: do not call ACPI from invalid context

The LED on HP notebooks is connected through ACPI.  That unfortunately
means that it needs to be delayed by using schedule_work() to avoid
calling the ACPI interpreter from an invalid context.

[akpm@linux-foundation.org: use flush_work() rather than sort-of reimplementing it]
Signed-off-by: Pavel Machek <pavel@suse.cz>
Cc: Éric Piel <eric.piel@tremplin-utc.net>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agolis3: fix documentation to fit into 80 columns
Pavel Machek [Thu, 15 Jan 2009 21:51:24 +0000 (13:51 -0800)]
lis3: fix documentation to fit into 80 columns

Fix lis3 documentation to fit into 80 columns.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Cc: Éric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agolis3lv02d: merge with leds hp disk
Eric Piel [Thu, 15 Jan 2009 21:51:23 +0000 (13:51 -0800)]
lis3lv02d: merge with leds hp disk

Move the second part of the HP laptop disk protection functionality (a red
led) to the same driver.  From a purely Linux developer's point of view,
the led and the accelerometer have nothing related.  However, they
correspond to the same ACPI functionality, and so will always be used
together, moreover as they share the same ACPI PNP alias, there is no
other simple to allow to have same loaded at the same time if they are not
in the same module.  Also make it requires the led class to compile and
update the Kconfig text.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agolib/idr.c: use kmem_cache_zalloc() for the idr_layer cache
Andrew Morton [Thu, 15 Jan 2009 21:51:21 +0000 (13:51 -0800)]
lib/idr.c: use kmem_cache_zalloc() for the idr_layer cache

David points out that the idr_remove_all() function returns unused slabs
to the kmem cache, but needs to zero them first or else they will be
uninitialized upon next use.  This causes crashes which have been observed
in the firewire subsystem.

He fixed this by zeroing the object before freeing it in idr_remove_all().

But we agree that simply removing the constructor and zeroing the object
at allocation time is simpler than relying upon slab constructor machinery
and might even be faster.

This problem was introduced by "idr: make idr_remove rcu-safe" (commit
cf481c20c476ad2c0febdace9ce23f5a4db19582), which was first released in
2.6.27.

There are no known codesites which trigger this bug in 2.6.27 or 2.6.28.
The post-2.6.28 firewire changes are the only known triggerer.

There might of course be not-yet-discovered triggerers in 2.6.27 and
2.6.28, and there might be out-of-tree triggerers which are added to those
kernel versions.  I'll let the -stable guys decide whether they want to
backport this fix.

Reported-by: David Moore <dcm@acm.org>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: Nadia Derbey <Nadia.Derbey@bull.net>
Cc: Paul E. McKenney <paulmck@us.ibm.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Kristian Hgsberg <krh@redhat.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoalpha: make pte_alloc_one_kernel() inline
Ivan Kokshaysky [Thu, 15 Jan 2009 21:51:20 +0000 (13:51 -0800)]
alpha: make pte_alloc_one_kernel() inline

As it's just a single call to __get_free_page().

Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoalpha: .gitignore vmlinux.lds
Ivan Kokshaysky [Thu, 15 Jan 2009 21:51:20 +0000 (13:51 -0800)]
alpha: .gitignore vmlinux.lds

Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoalpha: fix RTC on marvel
Ivan Kokshaysky [Thu, 15 Jan 2009 21:51:19 +0000 (13:51 -0800)]
alpha: fix RTC on marvel

Unlike other alphas, marvel doesn't have real PC-style CMOS clock hardware
- RTC accesses are emulated via PAL calls.  Unfortunately, for unknown
reason these calls work only on CPU #0.  So current implementation for
arbitrary CPU makes CMOS_READ/WRITE to be executed on CPU #0 via IPI.
However, for obvious reason this doesn't work with standard
get/set_rtc_time() functions, where a bunch of CMOS accesses is done with
disabled interrupts.

Solved by making the IPI calls for entire get/set_rtc_time() functions,
not for individual CMOS accesses.  Which is also a lot more effective
performance-wise.

The patch is largely based on the code from Jay Estabrook.
My changes:
- tweak asm-generic/rtc.h by adding a couple of #defines to
  avoid a massive code duplication in arch/alpha/include/asm/rtc.h;
- sys_marvel.c: fix get/set_rtc_time() return values (Jay's FIXMEs).

NOTE: this fixes *only* LIB_RTC drivers.  Legacy (CONFIG_RTC) driver
wont't work on marvel.  Actually I think that we should just disable
CONFIG_RTC on alpha (maybe in 2.6.30?), like most other arches - AFAIK,
all modern distributions use LIB_RTC anyway.

Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoalpha: nautilus - fix hang on boot
Ivan Kokshaysky [Thu, 15 Jan 2009 21:51:18 +0000 (13:51 -0800)]
alpha: nautilus - fix hang on boot

Recently introduced generic pci_common_swizzle() relies on bus->self
being NULL for the root PCI bus. But on nautilus bus->self points to
the host bridge device, which is necessary as we do a root bus sizing
on this system. As a result, pci_common_swizzle() loops infinitely.
This worked until 2.6.29-rc1 because the alpha-specific swizzle routine
checked for bus->parent == NULL (instead of bus->self).

Fixed by clearing bus->self after bus sizing is done.

Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoalpha: nautilus - fix compile failure with gcc-4.3
Ivan Kokshaysky [Thu, 15 Jan 2009 21:51:17 +0000 (13:51 -0800)]
alpha: nautilus - fix compile failure with gcc-4.3

init_srm_irq() deals with irq's #16 and above, but size of irq_desc
array on nautilus and some other system types is 16. So gcc-4.3
complains that "array subscript is above array bounds", even though
this function is never called on those systems.

This adds a check for NR_IRQS <= 16, which effectively optimizes
init_srm_irq() code away on problematic platforms.

Thanks to Daniel Drake <dsd@gentoo.org> for detailed analysis
of the problem.

Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agorevert "mm: vmalloc use mutex for purge"
Andrew Morton [Thu, 15 Jan 2009 21:51:15 +0000 (13:51 -0800)]
revert "mm: vmalloc use mutex for purge"

Revert commit e97a630eb0f5b8b380fd67504de6cedebb489003 ("mm: vmalloc use
mutex for purge")

Bryan Donlan reports:

: After testing 2.6.29-rc1 on xen-x86 with a btrfs root filesystem, I
: got the OOPS quoted below and a hard freeze shortly after boot.
: Boot messages and config are attached.
:
: ------------[ cut here ]------------
: Kernel BUG at c05ef80d [verbose debug info unavailable]
: invalid opcode: 0000 [#1] SMP
: last sysfs file: /sys/block/xvdc/size
: Modules linked in:
:
: Pid: 0, comm: swapper Not tainted (2.6.29-rc1 #6)
: EIP: 0061:[<c05ef80d>] EFLAGS: 00010087 CPU: 2
: EIP is at schedule+0x7cd/0x950
: EAX: d5aeca80 EBX: 00000002 ECX: 00000000 EDX: d4cb9a40
: ESI: c12f5600 EDI: d4cb9a40 EBP: d6033fa4 ESP: d6033ef4
:  DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0069
: Process swapper (pid: 0, ti=d6032000 task=d6020b70 task.ti=d6032000)
: Stack:
:  000d85bc 00000000 000186a0 00000000 0dd11410 c0105417 c12efe00 0dc367c3
:  00000011 c0105d46 d5a5d310 deadbeef d4cb9a40 c07cc600 c05f1340 c12e0060
:  deadbeef d6020b70 d6020d08 00000002 c014377d 00000000 c12f5600 00002c22
: Call Trace:
:  [<c0105417>] xen_force_evtchn_callback+0x17/0x30
:  [<c0105d46>] check_events+0x8/0x12
:  [<c05f1340>] _spin_unlock_irqrestore+0x20/0x40
:  [<c014377d>] hrtimer_start_range_ns+0x12d/0x2e0
:  [<c014c4f6>] tick_nohz_restart_sched_tick+0x146/0x160
:  [<c0107485>] cpu_idle+0xa5/0xc0

and bisected it to this commit.

Let's remove it now while we have a think about the problem.

Reported-by: Bryan Donlan <bdonlan@gmail.com>
Tested-by: Christophe Saout <christophe@saout.de>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agomemcg: make oom less frequently
Daisuke Nishimura [Thu, 15 Jan 2009 21:51:14 +0000 (13:51 -0800)]
memcg: make oom less frequently

In previous implementation, mem_cgroup_try_charge checked the return
value of mem_cgroup_try_to_free_pages, and just retried if some pages
had been reclaimed.
But now, try_charge(and mem_cgroup_hierarchical_reclaim called from it)
only checks whether the usage is less than the limit.

This patch tries to change the behavior as before to cause oom less
frequently.

Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agomemcg: fix hierarchical reclaim
Daisuke Nishimura [Thu, 15 Jan 2009 21:51:13 +0000 (13:51 -0800)]
memcg: fix hierarchical reclaim

If root_mem has no children, last_scaned_child is set to root_mem itself.
But after some children added to root_mem, mem_cgroup_get_next_node can
mem_cgroup_put the root_mem although root_mem has not been mem_cgroup_get.

This patch fixes this behavior by:

- Set last_scanned_child to NULL if root_mem has no children or DFS
  search has returned to root_mem itself(root_mem is not a "child" of
  root_mem).  Make mem_cgroup_get_first_node return root_mem in this case.
   There are no mem_cgroup_get/put for root_mem.

- Rename mem_cgroup_get_next_node to __mem_cgroup_get_next_node, and
  mem_cgroup_get_first_node to mem_cgroup_get_next_node.  Make
  mem_cgroup_hierarchical_reclaim call only new mem_cgroup_get_next_node.

Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agomemcg: fix error path of mem_cgroup_move_parent
Daisuke Nishimura [Thu, 15 Jan 2009 21:51:12 +0000 (13:51 -0800)]
memcg: fix error path of mem_cgroup_move_parent

There is a bug in error path of mem_cgroup_move_parent.

Extra refcnt got from try_charge should be dropped, and usages incremented
by try_charge should be decremented in both error paths:

    A: failure at get_page_unless_zero
    B: failure at isolate_lru_page

This bug makes this parent directory unremovable.

In case of A, rmdir doesn't return, because res.usage doesn't go down to 0
at mem_cgroup_force_empty even after all the pc in lru are removed.

In case of B, rmdir fails and returns -EBUSY, because it has extra ref
counts even after res.usage goes down to 0.

Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agomemcg: fix mem_cgroup_get_reclaim_stat_from_page
Daisuke Nishimura [Thu, 15 Jan 2009 21:51:11 +0000 (13:51 -0800)]
memcg: fix mem_cgroup_get_reclaim_stat_from_page

In case of swapin, a new page is added to lru before it is charged,
so page->pc->mem_cgroup points to NULL or last mem_cgroup the page
was charged before.

In the latter case, if the mem_cgroup has already freed by rmdir,
the area pointed to by page->pc->mem_cgroup may have invalid data.

Actually, I saw general protection fault.

    general protection fault: 0000 [#1] SMP
    last sysfs file: /sys/devices/system/cpu/cpu15/cache/index1/shared_cpu_map
    CPU 4
    Modules linked in: ipt_REJECT xt_tcpudp iptable_filter ip_tables x_tables bridge stp ipv6 autofs4 hidp rfcomm l2cap bluetooth sunrpc dm_mirror dm_region_hash dm_log dm_multipath dm_mod rfkill input_polldev sbs sbshc battery ac lp sg ide_cd_mod cdrom button serio_raw acpi_memhotplug parport_pc e1000 rtc_cmos parport rtc_core rtc_lib i2c_i801 i2c_core shpchp pcspkr ata_piix libata megaraid_mbox megaraid_mm sd_mod scsi_mod ext3 jbd ehci_hcd ohci_hcd uhci_hcd [last unloaded: microcode]
    Pid: 26038, comm: page01 Tainted: G        W  2.6.28-rc9-mm1-mmotm-2008-12-22-16-14-f2ab3dea #1
    RIP: 0010:[<ffffffff8028e710>]  [<ffffffff8028e710>] update_page_reclaim_stat+0x2f/0x42
    RSP: 0000:ffff8801ee457da8  EFLAGS: 00010002
    RAX: 32353438312021c8 RBX: 0000000000000000 RCX: 32353438312021c8
    RDX: 0000000000000000 RSI: ffff8800cb0b1000 RDI: ffff8801164d1d28
    RBP: ffff880110002cb8 R08: ffff88010f2eae23 R09: 0000000000000001
    R10: ffff8800bc514b00 R11: ffff880110002c00 R12: 0000000000000000
    R13: ffff88000f484100 R14: 0000000000000003 R15: 00000000001200d2
    FS:  00007f8a261726f0(0000) GS:ffff88010f2eaa80(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
    CR2: 00007f8a25d22000 CR3: 00000001ef18c000 CR4: 00000000000006e0
    DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
    DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
    Process page01 (pid: 26038, threadinfo ffff8801ee456000, task ffff8800b585b960)
    Stack:
     ffffe200071ee568 ffff880110001f00 0000000000000000 ffffffff8028ea17
     ffff88000f484100 0000000000000000 0000000000000020 00007f8a25d22000
     ffff8800bc514b00 ffffffff8028ec34 0000000000000000 0000000000016fd8
    Call Trace:
     [<ffffffff8028ea17>] ? ____pagevec_lru_add+0xc1/0x13c
     [<ffffffff8028ec34>] ? drain_cpu_pagevecs+0x36/0x89
     [<ffffffff802a4f8c>] ? swapin_readahead+0x78/0x98
     [<ffffffff8029a37a>] ? handle_mm_fault+0x3d9/0x741
     [<ffffffff804da654>] ? do_page_fault+0x3ce/0x78c
     [<ffffffff804d7a42>] ? trace_hardirqs_off_thunk+0x3a/0x3c
     [<ffffffff804d860f>] ? page_fault+0x1f/0x30
    Code: cc 55 48 8d af b8 0d 00 00 48 89 f7 53 89 d3 e8 39 85 02 00 48 63 d3 48 ff 44 d5 10 45 85 e4 74 05 48 ff 44 d5 00 48 85 c0 74 0e <48> ff 44 d0 10 45 85 e4 74 04 48 ff 04 d0 5b 5d 41 5c c3 41 54
    RIP  [<ffffffff8028e710>] update_page_reclaim_stat+0x2f/0x42
     RSP <ffff8801ee457da8>

Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agohwmon: applesmc: fix light sensor readings on newer MacBooks
Alex Murray [Thu, 15 Jan 2009 21:51:08 +0000 (13:51 -0800)]
hwmon: applesmc: fix light sensor readings on newer MacBooks

The light sensors ALV0 and ALV1 on newer MacBooks (early 2008 and later)
changed to report 10 bytes instead the earlier 6, and the sensor encoding
subsequently changed.  As a result, the reported light sensors readings
are much too low.

Via experiments leading up to this patch, it seems only the ALV0 is
reporting data, and the most useful value therein is a 10-bit big-endian
value at offset 6.  This suggests that a new protocol was added as a
backward-compatible replacement on top of the old one.

This patch makes applesmc report the improved light sensor reading for the
new machines, on a scale in conformance with earlier ones.

Signed-off-by: Alex Murray <murray.alex@gmail.com>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Cc: Nicolas Boichat <nicolas@boichat.ch>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agocheckpatch: version: 0.27
Andy Whitcroft [Thu, 15 Jan 2009 21:51:07 +0000 (13:51 -0800)]
checkpatch: version: 0.27

Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agocheckpatch: struct seq_operations should normally be const
Andy Whitcroft [Thu, 15 Jan 2009 21:51:07 +0000 (13:51 -0800)]
checkpatch: struct seq_operations should normally be const

In the general use case struct seq_operations should be a const object.
Check for and warn where it is not.

Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agocheckpatch: if should not continue a preceeding brace
Andy Whitcroft [Thu, 15 Jan 2009 21:51:06 +0000 (13:51 -0800)]
checkpatch: if should not continue a preceeding brace

We should not be continuing a braced section with an if, for example:

if (...) {
} if (...) {
}

Detect this and suggest adding a newline.

Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agocheckpatch: allow parentheses on return handle array values
Andy Whitcroft [Thu, 15 Jan 2009 21:51:06 +0000 (13:51 -0800)]
checkpatch: allow parentheses on return handle array values

When we allow return to have surrounding parentheses when containing
comparison operators we are not correctly handling the case where the
values contain array sufffixes.  Squash them.

Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agocheckpatch: type/cast spacing should not check prefix spacing
Andy Whitcroft [Thu, 15 Jan 2009 21:51:05 +0000 (13:51 -0800)]
checkpatch: type/cast spacing should not check prefix spacing

We should not be complaining about the prefix spacing for types and casts.
 We are triggering here because the check for spacing between '*'s is
overly loose.  Tighten this up.

Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agocheckpatch: handle missing #if open in context
Andy Whitcroft [Thu, 15 Jan 2009 21:51:04 +0000 (13:51 -0800)]
checkpatch: handle missing #if open in context

If the #if opening statement is not in the context then the context stack
can be empty.  Handle this by ensuring there is always a blank entry in
the stack.

Signed-off-by: Andy Whitcroft <apw@canonical.com>
Tested-by: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agonbd: do not allow two clients at the same time
Pavel Machek [Thu, 15 Jan 2009 21:51:03 +0000 (13:51 -0800)]
nbd: do not allow two clients at the same time

Two nbd-clients at same time are bad idea, and cause WARN_ON from nbd in
2.6.28-rc7 from sysfs_add_one.  This simply prevents that from happening.

To reproduce:

 cat /dev/zero | head -c 10000000 > /tmp/delme.fstest.fs
 nbd-server 9100 -l /anyone.can.connect > /tmp/delme.fstest.fs &
 sleep 1
 nbd-client localhost 9100 /dev/nd0 &
 nbd-client localhost 9100 /dev/nd0 &

Signed-off-by: Pavel Machek <pavel@suse.cz>
Acked-by: Paul Clements <paul.clements@steeleye.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agobtrfs & squashfs: Move btrfs and squashfsto's magic number to <linux/magic.h>
Qinghuang Feng [Thu, 15 Jan 2009 21:51:03 +0000 (13:51 -0800)]
btrfs & squashfs: Move btrfs and squashfsto's magic number to <linux/magic.h>

Use the standard magic.h for btrfs and squashfs.

Signed-off-by: Qinghuang Feng <qhfeng.kernel@gmail.com>
Cc: Phillip Lougher <phillip@lougher.demon.co.uk>
Cc: Chris Mason <chris.mason@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoMAINTAINERS: add entry for freezer
Pavel Machek [Thu, 15 Jan 2009 21:51:02 +0000 (13:51 -0800)]
MAINTAINERS: add entry for freezer

Now that people are using freezer for non-suspend/hibernation stuff, it
should have separate maintainers entry so that it is easier to find.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoresources: fix parameter name and kernel-doc
Randy Dunlap [Thu, 15 Jan 2009 21:51:01 +0000 (13:51 -0800)]
resources: fix parameter name and kernel-doc

Fix __request_region() parameter kernel-doc notation and parameter name:

Warning(linux-2.6.28-git10//kernel/resource.c:627): No description found for parameter 'flags'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agojbd: fix missing kernel-doc
Randy Dunlap [Thu, 15 Jan 2009 21:51:01 +0000 (13:51 -0800)]
jbd: fix missing kernel-doc

Fix jbd header file kernel-doc notation:

Warning(linux-2.6.28-git13//include/linux/jbd.h:823): No description found for parameter 'j_average_commit_time'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoDocumentation/accounting/getdelays.c: fix endless loop
Marcus Meissner [Thu, 15 Jan 2009 21:51:00 +0000 (13:51 -0800)]
Documentation/accounting/getdelays.c: fix endless loop

When no option is passed to getdelays it just hangs, waiting
for a reply which will never come.

This patch prints usage() when no output marker is specified.

Signed-off-by: Marcus Meissner <meissner@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoidr: fix wrong kernel-doc
Li Zefan [Thu, 15 Jan 2009 21:51:00 +0000 (13:51 -0800)]
idr: fix wrong kernel-doc

idr_get_new_above() and ida_get_new_above() return an id in the range of
@staring_id ... 0x7fffffff, not 0 ... 0x7fffffff.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agocgroups: consolidate cgroup documents
Li Zefan [Thu, 15 Jan 2009 21:50:59 +0000 (13:50 -0800)]
cgroups: consolidate cgroup documents

Move Documentation/cpusets.txt and Documentation/controllers/* to
Documentation/cgroups/

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agocgroups: clean up Kconfig
Li Zefan [Thu, 15 Jan 2009 21:50:58 +0000 (13:50 -0800)]
cgroups: clean up Kconfig

- move CONFIG_PROC_PID_CPUSET into cgroup menu
- move MM_OWNER to the bottom for better menu indent
- fix typos
- use tabs not spaces

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Paul Menage <menage@google.com>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agosynclink_gt: enable RI interrupt
Paul Fulghum [Thu, 15 Jan 2009 21:50:57 +0000 (13:50 -0800)]
synclink_gt: enable RI interrupt

- Enable ring indicator interrupt.

- Remove vendor specific CVS version tags.

Signed-off-by: Paul Fulghum <paulkf@microgate.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agosgi-xp: eliminate false detection of no heartbeat
Dean Nelson [Thu, 15 Jan 2009 21:50:57 +0000 (13:50 -0800)]
sgi-xp: eliminate false detection of no heartbeat

After XPC has been up and running on multiple partitions for any length of
time, if XPC on one of the partitions is stopped and restarted (either by
a rmmod/insmod or a system restart), it is possible for the XPCs running
on the other partitions to falsely detect a lack of heartbeat from the XPC
that was just restarted.  This false detection will occur if the restarted
XPC comes up within the five-seconds preceding one of the other XPC's
heartbeat check (which occurs once every twenty seconds).

The detection of no heartbeat results in the detecting XPC deactivating
from the just restarted XPC.  The only remedy is to restart one of the
XPCs and hope that one doesn't hit this five-second window on any of the
other partitions.

Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Robin Holt <holt@sgi.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agortc: rtc-twl4030 don't mask alarm interrupts on shutdown
Matti Halme [Thu, 15 Jan 2009 21:50:56 +0000 (13:50 -0800)]
rtc: rtc-twl4030 don't mask alarm interrupts on shutdown

A triggering RTC alarm should be able to power on a device that has been
powered off. This patch enables that on twl4030 by not masking the alarm
interrupt at shutdown.

Signed-off-by: Matti Halme <matti.halme@nokia.com>
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Samuel Ortiz <sameo@openedhand.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agortc-pxa: fix build failure
Antonio Ospite [Thu, 15 Jan 2009 21:50:54 +0000 (13:50 -0800)]
rtc-pxa: fix build failure

Fix these build errors:

  CC      drivers/rtc/rtc-pxa.o
drivers/rtc/rtc-pxa.c: In function `pxa_rtc_init':
drivers/rtc/rtc-pxa.c:472: error: implicit declaration of function `cpu_is_pxa27x'
drivers/rtc/rtc-pxa.c:472: error: implicit declaration of function `cpu_is_pxa3xx'

Signed-off-by: Antonio Ospite <ao2@openezx.org>
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agortc: tw4030 add alarm/update interfaces
Alessandro Zummo [Thu, 15 Jan 2009 21:50:52 +0000 (13:50 -0800)]
rtc: tw4030 add alarm/update interfaces

- implement alarm_irq_enable
- return correct error code when registering fails

[dbrownell@users.sourceforge.net: build fixes, force 1/sec irqs]
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Samuel Ortiz <sameo@openedhand.com>
Cc: rtc-linux@googlegroups.com
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agosysrq: add commentary on why we use the console loglevel over using KERN_EMERG
Andy Whitcroft [Thu, 15 Jan 2009 21:50:52 +0000 (13:50 -0800)]
sysrq: add commentary on why we use the console loglevel over using KERN_EMERG

Add an explanitory comment as to why we modify the kernel console loglevel
rather than simply moving sysrq messages to KERN_EMERG level.

Signed-off-by: Andy Whitcroft <apw@canonical.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agosysrq documentation: document why the command header only is shown
Andy Whitcroft [Thu, 15 Jan 2009 21:50:51 +0000 (13:50 -0800)]
sysrq documentation: document why the command header only is shown

Document the interactions between loglevel and the sysrq output.  Also
document how to work round it should output be required on the console.

Signed-off-by: Andy Whitcroft <apw@canonical.com>
Cc: Martin Mares <mj@ucw.cz>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agosysrq documentation: remove the redundant updated date
Andy Whitcroft [Thu, 15 Jan 2009 21:50:50 +0000 (13:50 -0800)]
sysrq documentation: remove the redundant updated date

git is maintaining the last update time much more accuratly than the
internal update time.  Remove it.

Signed-off-by: Andy Whitcroft <apw@canonical.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoedac: add MAINTAINERS entry for i5400 EDAC driver
Mauro Carvalho Chehab [Thu, 15 Jan 2009 21:50:49 +0000 (13:50 -0800)]
edac: add MAINTAINERS entry for i5400 EDAC driver

i5400 EDAC driver were added upstream by those changesets:

 - 920c8df6ac678fdb8c49a6ce2e47a98e62757d77 "edac: driver for i5400 MCH (Seaburg)"
 - 8375d4909aee4c18798f373ecf24a79f040f75fc "edac: driver for i5400 MCH (update)"

Update MAINTAINERS entry for this file to correspond to the driver
maintainer.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: Ben Woodard <woodard@redhat.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoalpha: fix vmalloc breakage
Ivan Kokshaysky [Thu, 15 Jan 2009 21:50:48 +0000 (13:50 -0800)]
alpha: fix vmalloc breakage

On alpha, we have to map some stuff in the VMALLOC space very early in the
boot process (to make SRM console callbacks work and so on, see
arch/alpha/mm/init.c).  For old VM allocator, we just manually placed a
vm_struct onto the global vmlist and this worked for ages.

Unfortunately, the new allocator isn't aware of this, so it constantly
tries to allocate the VM space which is already in use, making vmalloc on
alpha defunct.

This patch forces KVA to import vmlist entries on init.

[akpm@linux-foundation.org: remove unneeded check (per Johannes)]
Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agovideo/framebuffer: fix bug: jpegview cannot work on framebuffer device other than...
Michael Hennerich [Thu, 15 Jan 2009 21:50:46 +0000 (13:50 -0800)]
video/framebuffer: fix bug: jpegview cannot work on framebuffer device other than 16BPP

Force fb_var_screeninfo color format on all Blackfin Framebuffer Drivers.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Cc: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agogpio: fix probe() error return in gpio driver probes
Ben Dooks [Thu, 15 Jan 2009 21:50:45 +0000 (13:50 -0800)]
gpio: fix probe() error return in gpio driver probes

A number of drivers in drivers/gpio return -ENODEV when confronted with
missing setup parameters such as the platform data.  However, returning
-ENODEV causes the driver layer to silently ignore the driver as it
assumes the probe did not find anything and was only speculative.

To make life easier to discern why a driver is not being attached, change
to returning -EINVAL, which is a better description of the fact that the
driver data was not valid.

Also add a set of dev_dbg() statements to the error paths to provide an
better explanation of the error as there may be more that one point in the
driver.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoatmel_spi: allow transfer when max_speed_hz = 0
Stanislaw Gruszka [Thu, 15 Jan 2009 21:50:44 +0000 (13:50 -0800)]
atmel_spi: allow transfer when max_speed_hz = 0

For some reason I have to slowdown clock to touchscreen device.

In atmel_spi_setup() there is comment that max_speed_hz == 0 means as slow
as possible and divider is set to maximum value.  But in
atmel_spi_transfer() function is check against not zero max_speed_hz with
EINVAL returned.

Probably driver should setup divider for each transfer based on
transfer->speed_hz value, but I think that would be not necessary overhead
as all used devices have constant clock.

Below patch works fine for me.

Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoatmel_serial: fix flow control bug
Itai Levi [Thu, 15 Jan 2009 21:50:43 +0000 (13:50 -0800)]
atmel_serial: fix flow control bug

Fix the following problem, related to hardware flow control (CTS/RTS):
Transmitting while CTS line is asserted in DMA mode, due to not checking
for tx-stopped condition.

We found these problems while testing the UARTs with hardware
flow-control.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Cc: "Andrew Victor" <avictor.za@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoUpdate of Documentation: vm.txt and proc.txt
Peter W Morreale [Thu, 15 Jan 2009 21:50:42 +0000 (13:50 -0800)]
Update of Documentation: vm.txt and proc.txt

Update Documentation/sysctl/vm.txt and Documentation/filesystems/proc.txt.
 More specifically, the section on /proc/sys/vm in
Documentation/filesystems/proc.txt was removed and a link to
Documentation/sysctl/vm.txt added.

Most of the verbiage from proc.txt was simply moved in vm.txt, with new
addtional text for "swappiness" and "stat_interval".

Signed-off-by: Peter W Morreale <pmorreale@novell.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoRevert "x86 PAT: remove CPA WARN_ON for zero pte"
Linus Torvalds [Thu, 15 Jan 2009 23:32:12 +0000 (15:32 -0800)]
Revert "x86 PAT: remove CPA WARN_ON for zero pte"

This reverts commit 58dab916dfb57328d50deb0aa9b3fc92efa248ff, which
makes my Nehalem come to a nasty crawling almost-halt.  It looks like it
turns off caching of regular kernel RAM, with the understandable
slowdown of a few orders of magnitude as a result.

Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Peter Anvin <hpa@zytor.com>
Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agob44: GFP_DMA skb should not escape from driver
Eric Dumazet [Thu, 15 Jan 2009 23:29:35 +0000 (15:29 -0800)]
b44: GFP_DMA skb should not escape from driver

b44 chip has some hardware limitations, that need GFP_DMA bounce
buffers in some situations.

In order to not deplete DMA zone, we should keep allocated GFP_DMA skb
only for driver use. At rx time, we copy such skb to newly allocated
skb, reusing existing copybreak infrastructure.

On machines with low amount of memory, all skb meet the hardware limitation,
so no copy is needed. We detect this situation using a new device flag, set
to one if one GFP_DMA skb was ever allocated by b44_alloc_rx_skb().

Previously allocated skb, even outside from DMA zone will then be recycled,
to have minimal impact on DMA zone use.

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Tested-by: Ionut Leonte <ionut.leonte@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agohwmon: (abituguru3) Fix CONFIG_DMI=n fallback to probe
Alistair John Strachan [Thu, 15 Jan 2009 21:27:48 +0000 (22:27 +0100)]
hwmon: (abituguru3) Fix CONFIG_DMI=n fallback to probe

When CONFIG_DMI is not enabled, dmi detection should flag that no board
could be detected (err=1) rather than another error condition (err<0).

This fixes the fallback to manual probing for all motherboards, even
those without DMI strings, when CONFIG_DMI=n.

Signed-off-by: Alistair John Strachan <alistair@devzero.co.uk>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
15 years agohwmon: (abituguru3) Enable DMI probing feature on IN9 32X MAX
Alistair John Strachan [Thu, 15 Jan 2009 21:27:48 +0000 (22:27 +0100)]
hwmon: (abituguru3) Enable DMI probing feature on IN9 32X MAX

Switch the IN9 32X MAX over from port probing to the preferred DMI
probe method.

Signed-off-by: Alistair John Strachan <alistair@devzero.co.uk>
Tested-by: Paul Hartman <paul.hartman+gentoo@gmail.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
15 years agohwmon: (abituguru3) Match partial DMI board name strings
Alistair John Strachan [Thu, 15 Jan 2009 21:27:47 +0000 (22:27 +0100)]
hwmon: (abituguru3) Match partial DMI board name strings

The switch-over to using DMI board strings to identify abituguru3 compatible
mainboards works most of the time, but sometimes the vendor has substantially
modified the board string between BIOS revisions.

We have found that the vendor chipset identification string (provided in
brackets) changes frequently and is of no use to us. The rest of the board
string sometimes changes in subtle ways, e.g. whitespace or variations in
capitalization.

The new comparison code checks only a part of the supplied DMI board string,
trimming the bracketed content, whitespace, and ignoring case as necessary.

This fixes a bug where an IP35 Pro running an early BIOS would not be
detected without the force=1 module parameter, and also speculatively
fixes other similiar issues.

Signed-off-by: Alistair John Strachan <alistair@devzero.co.uk>
Reported-by: Nick Pasich <NewsLetters@nickandbarb.net>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
15 years agohwmon: Add a driver for the ADT7475 hardware monitoring chip
Jordan Crouse [Thu, 15 Jan 2009 21:27:47 +0000 (22:27 +0100)]
hwmon: Add a driver for the ADT7475 hardware monitoring chip

Hwmon driver for the ADT7475 chip.

Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
15 years agohwmon: (k8temp) Fix temperature reporting for (most) K8 RevG CPUs
Andreas Herrmann [Thu, 15 Jan 2009 21:27:47 +0000 (22:27 +0100)]
hwmon: (k8temp) Fix temperature reporting for (most) K8 RevG CPUs

Current Temperature for K8 RevG desktop CPUs is a "normalized value"
which can be below ambient temperature.

As a consequence lots of RevG systems report temperatures like:

$ sensors
k8temp-pci-00c3
Adapter: PCI adapter
Core0 Temp:    +17 C
Core0 Temp:     +3 C
Core1 Temp:    +21 C
Core1 Temp:     +5 C

being quite below ambient temperature.
There are even reports of negative temperature values.

This patch corrects the temperature reporting of k8temp for
RevG desktop CPUs.

Cc: Rudolf Marek <r.marek@assembler.cz>
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
15 years agohwmon: (k8temp) Fix wrong sensor selection for AMD K8 RevF/RevG CPUs
Andreas Herrmann [Thu, 15 Jan 2009 21:27:47 +0000 (22:27 +0100)]
hwmon: (k8temp) Fix wrong sensor selection for AMD K8 RevF/RevG CPUs

Meaning of ThermSenseCoreSel bit was inverted beginning with K8 RevF.
That means with current driver temp1/temp2 belong to core 1 and
temp3/temp4 belong to core 0 on a K8 RevF/RevG CPU.

This patch ensures that temp1/temp2 always belong to core 0 and
temp3/temp4 to core 1 for all K8 revisions.

Cc: Rudolf Marek <r.marek@assembler.cz>
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>