Alexander Duyck [Thu, 9 Apr 2015 01:49:49 +0000 (18:49 -0700)]
e100: Use dma_rmb/wmb where appropriate
Reduce the CPU overhead for transmit and receive by using lightweight dma_
barriers instead of full barriers where they are applicable.
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Duyck [Thu, 9 Apr 2015 01:49:43 +0000 (18:49 -0700)]
i40e/i40evf: Use dma_rmb where appropriate
Update i40e and i40evf to use dma_rmb. This should improve performance by
decreasing the barrier overhead on strong ordered architectures.
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Duyck [Thu, 9 Apr 2015 01:49:36 +0000 (18:49 -0700)]
mlx4/mlx5: Use dma_wmb/rmb where appropriate
This patch should help to improve the performance of the mlx4 and mlx5 on a
number of architectures. For example, on x86 the dma_wmb/rmb equates out
to a barrer() call as the architecture is already strong ordered, and on
PowerPC the call works out to a lwsync which is significantly less expensive
than the sync call that was being used for wmb.
I placed the new barriers between any spots that seemed to be trying to
order memory/memory reads or writes, if there are any spots that involved
MMIO I left the existing wmb in place as the new barriers cannot order
transactions between coherent and non-coherent memories.
v2: Reduced the replacments to just the spots where I could clearly
identify the usage pattern.
Cc: Amir Vadai <amirv@mellanox.com> Cc: Ido Shamay <idos@mellanox.com> Cc: Eli Cohen <eli@mellanox.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Duyck [Thu, 9 Apr 2015 01:49:29 +0000 (18:49 -0700)]
cxgb3/4/4vf: Update drivers to use dma_rmb/wmb where appropriate
Update the Chelsio Ethernet drivers to use the dma_rmb/wmb calls instead of
the full barriers in order to improve performance.
Cc: Santosh Raspatur <santosh@chelsio.com> Cc: Hariprasad S <hariprasad@chelsio.com> Cc: Casey Leedom <leedom@chelsio.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
For the long-term, we should handle NETDEV_{UP,DOWN} event
from the lower device of a tunnel device.
Fixes: 56ef9c909b40 ("vxlan: Move socket initialization to within rtnl scope") Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Wed, 8 Apr 2015 22:34:04 +0000 (15:34 -0700)]
tcp: do not rearm rsk_timer on FastOpen requests
FastOpen requests are not like other regular request sockets.
They do not yet use rsk_timer : tcp_fastopen_queue_check()
simply manually removes one expired request from fastopenq->rskq_rst
list.
Therefore, tcp_check_req() must not call mod_timer_pending(),
otherwise we crash because rsk_timer was not initialized.
Fixes: fa76ce7328b ("inet: get rid of central tcp/dccp listener timer") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 8 Apr 2015 21:12:50 +0000 (17:12 -0400)]
Merge tag 'nfc-next-4.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-next
Samuel Ortiz says:
====================
NFC: 4.1 pull request
This is the NFC pull request for 4.1.
This is a shorter one than usual, as the Intel Field Peak NFC
driver could not make it in time.
We have:
- A new driver for NXP NCI based chipsets, like e.g. the NPC100 or
the PN7150. It currently only supports an i2c physical layer, but
could easily be extended to work on top of e.g. SPI.
This driver also includes support for user space triggered firmware
updates.
- A few minor st21nfc[ab] fixes, cleanups, and comments improvements.
- A pn533 error return fix.
- A few NFC related logs formatting cleanups.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David Miller [Wed, 8 Apr 2015 03:05:42 +0000 (23:05 -0400)]
netfilter: Fix switch statement warnings with recent gcc.
More recent GCC warns about two kinds of switch statement uses:
1) Switching on an enumeration, but not having an explicit case
statement for all members of the enumeration. To show the
compiler this is intentional, we simply add a default case
with nothing more than a break statement.
2) Switching on a boolean value. I think this warning is dumb
but nevertheless you get it wholesale with -Wswitch.
This patch cures all such warnings in netfilter.
Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
David S. Miller [Wed, 8 Apr 2015 19:19:17 +0000 (15:19 -0400)]
Merge branch 'selinux-nlmsg'
Nicolas Dichtel says:
====================
selinux: add some missing nlmsg commands
It's not a critical issue, thus the patches are based on net-next.
Patches are splitted because the 'Fixes' tag is not the same for all
commands.
==================== Signed-off-by: David S. Miller <davem@davemloft.net>
Nicolas Dichtel [Wed, 8 Apr 2015 16:36:42 +0000 (18:36 +0200)]
selinux/nlmsg: add XFRM_MSG_[NEW|GET]SADINFO
These commands are missing.
Fixes: 28d8909bc790 ("[XFRM]: Export SAD info.") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Nicolas Dichtel [Wed, 8 Apr 2015 16:36:41 +0000 (18:36 +0200)]
selinux/nlmsg: add XFRM_MSG_GETSPDINFO
This command is missing.
Fixes: ecfd6b183780 ("[XFRM]: Export SPD info") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Nicolas Dichtel [Wed, 8 Apr 2015 16:36:40 +0000 (18:36 +0200)]
selinux/nlmsg: add XFRM_MSG_NEWSPDINFO
This new command is missing.
Fixes: 880a6fab8f6b ("xfrm: configure policy hash table thresholds by netlink") Reported-by: Christophe Gouault <christophe.gouault@6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Nicolas Dichtel [Wed, 8 Apr 2015 16:36:39 +0000 (18:36 +0200)]
selinux/nlmsg: add RTM_GETNSID
This new command is missing.
Fixes: 9a9634545c70 ("netns: notify netns id events") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Nicolas Dichtel [Wed, 8 Apr 2015 16:36:38 +0000 (18:36 +0200)]
selinux/nlmsg: add RTM_NEWNSID and RTM_GETNSID
These new commands are missing.
Fixes: 0c7aecd4bde4 ("netns: add rtnl cmd to add and get peer netns ids") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The DWMAC block on certain SoCs (such as IMG Pistachio) have a second
clock which must be enabled in order to access the peripheral's
register interface, so add support for requesting and enabling an
optional "pclk".
Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Cc: James Hartley <james.hartley@imgtec.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 8 Apr 2015 16:27:26 +0000 (12:27 -0400)]
Merge branch 'hv_netvsc_linearize'
Vitaly Kuznetsov says:
====================
hv_netvsc: linearize SKBs bigger than MAX_PAGE_BUFFER_COUNT-2 pages
This patch series fixes the same issue which was fixed in Xen with commit 97a6d1bb2b658ac85ed88205ccd1ab809899884d ("xen-netfront: Fix handling packets on
compound pages with skb_linearize").
It is relatively easy to create a packet which is small in size but occupies
more than 30 (MAX_PAGE_BUFFER_COUNT-2) pages. Here is a kernel-mode reproducer
which tries sending a packet with only 34 bytes of payload (but on 34 pages)
and fails:
static int __init sendfb_init(void)
{
struct socket *sock;
int i, ret;
struct sockaddr_in in4_addr = { 0 };
struct page *pages[17];
unsigned long flags;
ret = sock_create_kern(AF_INET, SOCK_STREAM, IPPROTO_TCP, &sock);
if (ret) {
pr_err("failed to create socket: %d!\n", ret);
return ret;
}
ret = sock->ops->connect(sock, (struct sockaddr *)&in4_addr, sizeof(in4_addr), 0);
if (ret) {
pr_err("failed to connect: %d!\n", ret);
return ret;
}
/* We can send up to 17 frags */
flags = MSG_MORE;
for (i = 0; i < 17; i++) {
if (i == 16)
flags = MSG_EOR;
pages[i] = alloc_pages(GFP_KERNEL | __GFP_COMP, 1);
if (!pages[i]) {
pr_err("out of memory!");
goto free_pages;
}
sock->ops->sendpage(sock, pages[i], PAGE_SIZE -1, 2, flags);
}
free_pages:
for (; i > 0; i--)
__free_pages(pages[i - 1], 1);
printk("sendfb_init: test done\n");
return -1;
}
module_init(sendfb_init);
MODULE_LICENSE("GPL");
A try to load such module results in multiple
'kernel: hv_netvsc vmbus_15 eth0: Packet too big: 100' messages as all retries
fail as well. It should also be possible to trigger the issue from userspace, I
expect e.g. NFS under heavy load to get stuck sometimes.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
hv_netvsc: try linearizing big SKBs before dropping them
In netvsc_start_xmit() we can handle packets which are scattered around not
more than MAX_PAGE_BUFFER_COUNT-2 pages. It is, however, easy to create a
packet which is not big in size but occupies more pages (e.g. if it uses frags
on compound pages boundaries). When we drop such packet it cases sender to try
resending it but in most cases it will try resending the same packet which will
also get dropped, this will cause the particular connection to stick. To solve
the issue we can try linearizing skb.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
hv_netvsc: use single existing drop path in netvsc_start_xmit
... which validly uses dev_kfree_skb_any() instead of dev_kfree_skb().
Setting ret to -EFAULT and -ENOMEM have no real meaning here (we need to set
it to anything but -EAGAIN) as we drop the packet and return NETDEV_TX_OK
anyway.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 8 Apr 2015 16:21:36 +0000 (12:21 -0400)]
Merge branch 'sfc-next'
Shradha Shah says:
====================
sfc: Nic specific sriov functions, netdev_ops and sriov_configure
First two patches among the series of patches to support SRIOV on EF10.
First patch declares nic specific sriov functions in nic specific headers,
creates only one instance of the netdev_ops, removes sriov functionality
from Falcon code.
Second patch adds support for sriov_configure.
The Virtual Functions can be enabled but they do not bind to the SFC
driver just yet.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Shradha Shah [Wed, 8 Apr 2015 14:24:45 +0000 (15:24 +0100)]
sfc: Own header for nic-specific sriov functions, single instance of netdev_ops and sriov removed from Falcon code
By putting all the efx_{siena,ef10}_sriov_* declarations in
{siena,ef10}_sriov.h, ensure they cannot be called from nic-generic code.
Also fixes up an instance of this, where mcdi.c was calling
efx_siena_sriov_flr.
The single instance of netdev_ops should call general high level
functions that can then call something adapter specific in efx_nic_type.
We should only do adapter specialisation via efx_nic_type.
Removal of sriov functionality from the Falcon code means that tests
are needed for the presence of some callbacks.
Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 8 Apr 2015 16:15:15 +0000 (12:15 -0400)]
Merge branch 'dma_rmb_wmb'
Alexander Duyck says:
====================
Replace wmb()/rmb() with dma_wmb()/dma_rmb() where appropriate
This is a start of a side project cleaning up the drivers that can make use
of the dma_wmb and dma_rmb calls. The general idea is to start removing
the unnecessary wmb/rmb calls from a number of drivers and to make use of
the lighter weight dma_wmb/dma_rmb calls as this should allow for an
overall improvement in performance as each barrier can cost a significant
number of cycles and on architectures such as x86 this is unnecessary.
These changes are what I would consider low hanging fruit. The likelihood
of the changes introducing an error should be low since the use of the
barriers in these cases are fairly obvious.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Duyck [Tue, 7 Apr 2015 23:55:27 +0000 (16:55 -0700)]
e1000, e1000e: Use dma_rmb instead of rmb for descriptor read ordering
This change replaces calls to rmb with dma_rmb in the case where we want to
order all follow-on descriptor reads after the check for the descriptor
status bit.
Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Duyck [Tue, 7 Apr 2015 23:55:21 +0000 (16:55 -0700)]
s2io: Update driver to use dma_wmb
This change updates several spots where a wmb was being used to instead use
a dma_wmb to flush out writes before updating the control portion of the
descriptor.
Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Duyck [Tue, 7 Apr 2015 23:55:14 +0000 (16:55 -0700)]
sungem, sunhme, sunvnet: Update drivers to use dma_wmb/rmb
This patch goes through and replaces wmb/rmb with dma_wmb/dma_rmb in cases
where the barrier is being used to order writes or reads to just memory and
doesn't involve any programmed I/O.
Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
ipv6: call iptunnel_xmit with NULL sock pointer if no tunnel sock is available
Fixes: 79b16aadea32cce ("udp_tunnel: Pass UDP socket down through udp_tunnel{, 6}_xmit_skb().") Reported-by: David S. Miller <davem@davemloft.net> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
ipv4: ip_tunnel: use net namespace from rtable not socket
The socket parameter might legally be NULL, thus sock_net is sometimes
causing a NULL pointer dereference. Using net_device pointer in dst_entry
is more reliable.
Fixes: b6a7719aedd7e5c ("ipv4: hash net ptr into fragmentation bucket selection") Reported-by: Rick Jones <rick.jones2@hp.com> Cc: Rick Jones <rick.jones2@hp.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
hv_netvsc: Fix the packet free when it is in skb headroom
In the two places changed, we now use netvsc_xmit_completion() which properly
frees hv_netvsc_packet in or not in skb headroom.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The sum of RNDIS msg and PPI struct sizes is used in multiple places, so we define
a macro for them.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Lee [Mon, 6 Apr 2015 21:37:27 +0000 (14:37 -0700)]
tcp: RFC7413 option support for Fast Open client
Fast Open has been using an experimental option with a magic number
(RFC6994). This patch makes the client by default use the RFC7413
option (34) to get and send Fast Open cookies. This patch makes
the client solicit cookies from a given server first with the
RFC7413 option. If that fails to elicit a cookie, then it tries
the RFC6994 experimental option. If that also fails, it uses the
RFC7413 option on all subsequent connect attempts. If the server
returns a Fast Open cookie then the client caches the form of the
option that successfully elicited a cookie, and uses that form on
later connects when it presents that cookie.
The idea is to gradually obsolete the use of experimental options as
the servers and clients upgrade, while keeping the interoperability
meanwhile.
Signed-off-by: Daniel Lee <Longinus00@gmail.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Lee [Mon, 6 Apr 2015 21:37:26 +0000 (14:37 -0700)]
tcp: RFC7413 option support for Fast Open server
Fast Open has been using the experimental option with a magic number
(RFC6994) to request and grant Fast Open cookies. This patch enables
the server to support the official IANA option 34 in RFC7413 in
addition.
The change has passed all existing Fast Open tests with both
old and new options at Google.
Signed-off-by: Daniel Lee <Longinus00@gmail.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Nicolas Dichtel [Tue, 7 Apr 2015 10:10:16 +0000 (12:10 +0200)]
netdevice.h: remove iflink description
Also move 'group' description to match the order of the net_device structure.
Fixes: 7a66bbc96ce9 ("net: remove iflink field from struct net_device") Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 7 Apr 2015 21:29:47 +0000 (17:29 -0400)]
Merge branch 'netns-next'
Nicolas Dichtel says:
====================
netns: enhance netlink interface for nsid
The first patch is a small cleanup. The second patch implements notifications
for netns id events. And the last one allows to dump existing netns id from
userland.
iproute2 patches are available, I can send them on demand.
v2: drop the first patch (the fix is now in net-next)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 7 Apr 2015 19:29:30 +0000 (15:29 -0400)]
Merge branch 'udp_tunnel_sk'
Prevent UDP tunnels from operating on garbage socket
So this should do the rest of the work such that when we encapsulate
into a UDP tunnel, the output path works on the UDP tunnel's socket
rather than skb->sk.
Part of this work is based upon changes done by Jiri Pirko some time
ago.
Basically the first step is to pass the socket through the nf_hook
okfn(), and then next we do the same for the UDP tunnel xmit routines.
Signed-off-by: David S. Miller <davem@davemloft.net>
David Miller [Mon, 6 Apr 2015 02:19:04 +0000 (22:19 -0400)]
netfilter: Pass socket pointer down through okfn().
On the output paths in particular, we have to sometimes deal with two
socket contexts. First, and usually skb->sk, is the local socket that
generated the frame.
And second, is potentially the socket used to control a tunneling
socket, such as one the encapsulates using UDP.
We do not want to disassociate skb->sk when encapsulating in order
to fix this, because that would break socket memory accounting.
The most extreme case where this can cause huge problems is an
AF_PACKET socket transmitting over a vxlan device. We hit code
paths doing checks that assume they are dealing with an ipv4
socket, but are actually operating upon the AF_PACKET one.
Signed-off-by: David S. Miller <davem@davemloft.net>
David Miller [Mon, 6 Apr 2015 02:19:00 +0000 (22:19 -0400)]
netfilter: Add socket pointer to nf_hook_state.
It is currently always set to NULL, but nf_queue is adjusted to be
prepared for it being set to a real socket by taking and releasing a
reference to that socket when necessary.
Signed-off-by: David S. Miller <davem@davemloft.net>
Here's what's probably the last bluetooth-next pull request for 4.1:
- Fixes for LE advertising data & advertising parameters
- Fix for race condition with HCI_RESET flag
- New BNEPGETSUPPFEAT ioctl, needed for certification
- New HCI request callback type to get the resulting skb
- Cleanups to use BIT() macro wherever possible
- Consolidate Broadcom device entries in the btusb HCI driver
- Check for valid flags in CMTP, HIDP & BNEP
- Disallow local privacy & OOB data combo to prevent a potential race
- Expose SMP & ECDH selftest results through debugfs
- Expose current Device ID info through debugfs
Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
1) In TCP, don't register an FRTO for cumulatively ACK'd data that was
previously SACK'd, from Neal Cardwell.
2) Need to hold RNL mutex in ipv4 multicast code namespace cleanup,
from Cong WANG.
3) Similarly we have to hold RNL mutex for fib_rules_unregister(), also
from Cong WANG.
4) Revert and rework netns nsid allocation fix, from Nicolas Dichtel.
5) When we encapsulate for a tunnel device, skb->sk still points to the
user socket. So this leads to cases where we retraverse the
ipv4/ipv6 output path with skb->sk being of some other address
family (f.e. AF_PACKET). This can cause things to crash since the
ipv4 output path is dereferencing an AF_PACKET socket as if it were
an ipv4 one.
The short term fix for 'net' and -stable is to elide these socket
checks once we've entered an encapsulation sequence by testing
xmit_recursion.
Longer term we have a better solution wherein we pass the tunnel's
socket down through the output paths, but that is way too invasive
for 'net' and -stable.
From Hannes Frederic Sowa.
6) l2tp_init() failure path forgets to unregister per-net ops, from
Cong WANG.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
net/mlx4_core: Fix error message deprecation for ConnectX-2 cards
net: dsa: fix filling routing table from OF description
l2tp: unregister l2tp_net_ops on failure path
mvneta: dont call mvneta_adjust_link() manually
ipv6: protect skb->sk accesses from recursive dereference inside the stack
netns: don't allocate an id for dead netns
Revert "netns: don't clear nsid too early on removal"
ip6mr: call del_timer_sync() in ip6mr_free_table()
net: move fib_rules_unregister() under rtnl lock
ipv4: take rtnl_lock and mark mrt table as freed on namespace cleanup
tcp: fix FRTO undo on cumulative ACK of SACKed range
xen-netfront: transmit fully GSO-sized packets
net/mlx4_core: Fix error message deprecation for ConnectX-2 cards
Commit 1daa4303b4ca ("net/mlx4_core: Deprecate error message at
ConnectX-2 cards startup to debug") did the deprecation only for port 1
of the card. Need to deprecate for port 2 as well.
Fixes: 1daa4303b4ca ("net/mlx4_core: Deprecate error message at ConnectX-2 cards startup to debug") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: dsa: fix filling routing table from OF description
According to description in 'include/net/dsa.h', in cascade switches
configurations where there are more than one interconnected devices,
'rtable' array in 'dsa_chip_data' structure is used to indicate which
port on this switch should be used to send packets to that are destined
for corresponding switch.
However, dsa_of_setup_routing_table() fills 'rtable' with port numbers
of the _target_ switch, but not current one.
This commit removes redundant devicetree parsing and adds needed port
number as a function argument. So dsa_of_setup_routing_table() now just
looks for target switch number by parsing parent of 'link' device node.
To remove possible misunderstandings with the way of determining target
switch number, a corresponding comment was added to the source code and
to the DSA device tree bindings documentation file.
This was tested on a custom board with two Marvell 88E6095 switches with
following corresponding routing tables: { -1, 10 } and { 8, -1 }.
Signed-off-by: Pavel Nakonechny <pavel.nakonechny@skitlab.ru> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
"Updates for the input subsystem - two more tweaks for ALPS driver to
work out kinks after splitting the touchpad, trackstick, and potential
external PS/2 mouse into separate input devices.
Changes to support ALPS SS4 devices (protocol V8) will be coming in
4.1..."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: alps - document stick behavior for protocol V2
Input: alps - report V2 Dualpoint Stick events via the right evdev node
Input: alps - report interleaved bare PS/2 packets via dev3
Commit 608cd71a9c7c ("tc: bpf: generalize pedit action") has added the
possibility to mangle packet data to BPF programs in the tc pipeline.
This patch adds two helpers bpf_l3_csum_replace() and bpf_l4_csum_replace()
for fixing up the protocol checksums after the packet mangling.
It also adds 'flags' argument to bpf_skb_store_bytes() helper to avoid
unnecessary checksum recomputations when BPF programs adjusting l3/l4
checksums and documents all three helpers in uapi header.
Moreover, a sample program is added to show how BPF programs can make use
of the mangle and csum helpers.
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
ipv6: protect skb->sk accesses from recursive dereference inside the stack
We should not consult skb->sk for output decisions in xmit recursion
levels > 0 in the stack. Otherwise local socket settings could influence
the result of e.g. tunnel encapsulation process.
ipv6 does not conform with this in three places:
1) ip6_fragment: we do consult ipv6_npinfo for frag_size
2) sk_mc_loop in ipv6 uses skb->sk and checks if we should
loop the packet back to the local socket
3) ip6_skb_dst_mtu could query the settings from the user socket and
force a wrong MTU
Furthermore:
In sk_mc_loop we could potentially land in WARN_ON(1) if we use a
PF_PACKET socket ontop of an IPv6-backed vxlan device.
Reuse xmit_recursion as we are currently only interested in protecting
tunnel devices.
Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
NFC: st21nfca: fix st21nfca_get_iso14443_3_uid data copy
st21nfca_get_iso14443_3_uid() does not correctly copy the uid from
uid_skb->data to its gate parameter. "gate = uid_skb->data;" only
puts a pointer to uid_skb->data to the local variable gate.
This means that in st21nfca_hci_target_from_gate() the content
of "u8 uid[NFC_NFCID1_MAXSIZE]" local variable is never initialized
before being used in memcpy(target->nfcid1, uid, len).
Fix this by replacing the local variable assignment with a memcpy.
This was found by compiling Linux with
"gcc -Wunused-but-set-parameter".
Acked-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
NFC: st21nfcb: Retry i2c_master_send if it returns a negative value
i2c_master_send may return many negative values different than
-EREMOTEIO.
In case an i2c transaction is NACK'ed, on raspberry pi B+
kernel 3.18, -EIO is generated instead.
Cc: stable@vger.kernel.org Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Hans de Goede [Sat, 4 Apr 2015 00:20:05 +0000 (17:20 -0700)]
Input: alps - report V2 Dualpoint Stick events via the right evdev node
On V2 devices the DualPoint Stick reports bare packets, these should be
reported via the "AlpsPS/2 ALPS DualPoint Stick" dev2 evdev node, which also
has the INPUT_PROP_POINTING_STICK propbit set.
Note that since there is no way to distinguish these packets from an external
PS/2 mouse (insofar as these laptops have an external PS/2 port) this means
that we will be reporting PS/2 mouse events via this evdev node too, as we've
been doing in kernel 3.19 and older.
This has been tested on a Dell Latitude D620 and a Dell Latitude E6400,
which both have a V2 touchpad + a DualPoint Stick which reports bare packets.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Hans de Goede [Sat, 4 Apr 2015 00:14:40 +0000 (17:14 -0700)]
Input: alps - report interleaved bare PS/2 packets via dev3
Bare packets should be reported via the same evdev device independent on
whether they are detected on the beginning of a packet or in the middle
of a packet.
This has been tested on a Dell Latitude E6400, where the DualPoint Stick
reports bare packets, which get reported via dev3 when the touchpad is
idle, and via dev2 when the touchpad and stick are used simultaneously.
This commit fixes this inconsistency by always reporting bare packets via
dev3. Note that since the come from a DualPoint Stick they really should be
reported via dev2, this gets fixed in a later commit.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Merge tag 'usb-4.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes and new device ids for 4.0-rc6. Nothing
major, some xhci fixes for reported problems, and some usb-serial
device ids.
All have been in linux-next for a while"
* tag 'usb-4.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: ftdi_sio: Use jtag quirk for SNAP Connect E10
usb: isp1760: fix spin unlock in the error path of isp1760_udc_start
usb: xhci: apply XHCI_AVOID_BEI quirk to all Intel xHCI controllers
usb: xhci: handle Config Error Change (CEC) in xhci driver
USB: keyspan_pda: add new device id
USB: ftdi_sio: Added custom PID for Synapse Wireless product
David S. Miller [Sat, 4 Apr 2015 19:23:15 +0000 (15:23 -0400)]
Merge branch 'nf-hook-compress'
netfilter: Compress hook function signatures.
Currently netfilter hooks have a function signature that is huge and
has many arguments. This propagates from the hook entry points down
into the individual hook implementations themselves.
This means that if, for example, we want to change the type of one of
these arguments then we have to touch hundreds of locations.
The main initial motivation behind this is that we'd like to change
the signature of "okfn" so that a socket pointer can be passed in (and
reference counted properly) for the sake of using the proper socket
context in the case of tunnels whilst not releasing the top level user
socket from skb->sk (and thus releasing it's socket memory quota
usage) in order to accomodate this.
This also makes it clear who actually uses 'okfn', nf_queue(). It is
absolutely critical to make this obvious because any user of 'okfn'
down in these hook chains have the be strictly audited for
escapability. Specifically, escapability of references to objects
outside of the packet processing path. And that's exactly what
nf_queue() does via it's packet reinjection framework.
In fact this points out a bug in Jiri's original attempt to push the
socket pointer down through netfilter's okfn. It didn't grab and drop
a reference to the socket in net/netfilter/nf_queue.c as needed.
Furthermore, so many code paths are simplified, and should in fact be
more efficient because we aren't passing in arguments that often are
simply not used by the netfilter hook at all.
Further simplifications are probably possible, but this series takes
care of the main cases.
Unfortunately I couldn't convert ebt_do_table() because ebtables is
complete and utter crap and uses ebt_do_table() outside of the hook
call chains. But that should not be news to anyone.
Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Merge tag 'staging-4.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are some staging driver fixes, well, really all just IIO driver
fixes, for 4.0-rc6. They fix issues that have been reported with
these drivers.
All of these patches have been in linux-next for a while"
* tag 'staging-4.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
iio: imu: Use iio_trigger_get for indio_dev->trig assignment
iio: adc: vf610: use ADC clock within specification
iio/adc/cc10001_adc.c: Fix !HAS_IOMEM build
iio: core: Fix double free.
iio:inv-mpu6050: Fix inconsistency for the scale channel
staging: iio: dummy: Fix undefined symbol build error
iio: inv_mpu6050: Clear timestamps fifo while resetting hardware fifo
staging: iio: hmc5843: Set iio name property in sysfs
iio: bmc150: change sampling frequency
iio: fix drivers that check buffer->scan_mask
Merge tag 'tty-4.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are 3 serial driver fixes for 4.0-rc6. They fix some reported
issues with the samsung and fsl_lpuart drivers.
All have been in linux-next for a while"
* tag 'tty-4.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: serial: fsl_lpuart: clear receive flag on FIFO flush
tty: serial: fsl_lpuart: specify transmit FIFO size
serial: samsung: Clear operation mode on UART shutdown
David S. Miller [Fri, 3 Apr 2015 20:23:58 +0000 (16:23 -0400)]
netfilter: Create and use nf_hook_state.
Instead of passing a large number of arguments down into the nf_hook()
entry points, create a structure which carries this state down through
the hook processing layers.
This makes is so that if we want to change the types or signatures of
any of these pieces of state, there are less places that need to be
changed.
Signed-off-by: David S. Miller <davem@davemloft.net>
Bluetooth: Fix location of TX power field in LE advertising data
The TX power field in the LE advertising data should be placed last
since it needs to be possible to enable kernel controlled TX power,
but still allow for userspace provided flags field.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input subsystem fixes from Dmitry Torokhov:
"A fix for ALPS driver for issue introduced in the latest update and a
tweak for yet another Lenovo box in Synaptics.
There will be more ALPS tweaks coming.."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: define INPUT_PROP_ACCELEROMETER behavior
Input: synaptics - fix min-max quirk value for E440
Input: synaptics - add quirk for Thinkpad E440
Input: ALPS - fix max coordinates for v5 and v7 protocols
Input: add MT_TOOL_PALM
With this patch kernel will be able to handle setup request. This is
needed if we would like to handle control mesages with extension
headers. User space will be only resposible for reading setup data and
checking if scenario is conformance to specification (dst and src device
bnep role). In case of new user space, setup data must be leaved(peek
msg) on queue. New bnep session will be responsible for handling this
data.
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Bluetooth: bnep: Add support to extended headers of control frames
Handling extended headers of control frames is required BNEP
functionality. This patch refractor bnep rx frame handling function.
Extended header for control frames shouldn't be omitted as it was
previously done. Every control frame should be checked if it contains
extended header and then every extension should be parsed separately.
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Bluetooth: bnep: Add support for get bnep features via ioctl
This is needed if user space wants to know supported bnep features
by kernel, e.g. if kernel supports sending response to bnep setup
control message. By now there is no possibility to know supported
features by kernel in case of bnep. Ioctls allows only to add connection,
delete connection, get connection list, get connection info. Adding
connection if it's possible (establishing network device connection) is
equivalent to starting bnep session. Bnep session handles data queue of
transmit, receive messages over bnep channel. It means that if we add
connection the received/transmitted data will be parsed immediately. In
case of get bnep features we want to know before session start, if we
should leave setup data on socket queue and let kernel to handle with it,
or in case of no setup handling support, if we should pull this message
and handle setup response within user space.
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
projects / linux-beck.git / log