Chaehyun Lim [Mon, 28 Mar 2016 04:55:58 +0000 (13:55 +0900)]
staging: wilc1000: change data type of wid argument in wilc_wlan_cfg_get_val
This patch changes data type of wid argument in wilc_wlan_cfg_get_val
from u32 to u16. It is better to change data type of wid because wid has
one of enum WID_T that is data type of u16. And, there is no need to use
u16 type casting when calling wilc_wlan_cfg_get_wid_value function.
Chaehyun Lim [Mon, 28 Mar 2016 04:55:57 +0000 (13:55 +0900)]
staging: wilc1000: change data type of wid argument in wilc_wlan_cfg_get
This patch changes data type of wid argument in wilc_wlan_cfg_get from
u32 to u16. It is better to change data type of wid because wid has one
of enum WID_T that is data type of u16. And, there is no need to use u16
type casting when calling wilc_wlan_cfg_get_wid function.
Chaehyun Lim [Mon, 28 Mar 2016 04:55:56 +0000 (13:55 +0900)]
staging: wilc1000: change data type of wid argument in wilc_wlan_cfg_set
This patch changes data type of wid argument in wilc_wlan_cfg_set from
u32 to u16. It is better to change data type of wid because wid has one of
enum WID_T that is data type of u16. And, there is no need to use u16
type casting when calling wilc_wlan_cfg_set_wid function.
James Simmons [Mon, 28 Mar 2016 00:26:28 +0000 (20:26 -0400)]
staging: lustre: libcfs: add CFS_FAULT_CHECK()
Add the macro CFS_FAULT_CHECK() which behaves like CFS_FAIL_CHECK()
except that any site may be matched by setting CFS_FAULT (0x02000000)
in cfs_fail_loc. Add cfs_fail_err for use as a return value with
CFS_FAULT_CHECK().
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5409
Reviewed-on: http://review.whamcloud.com/11263 Reviewed-by: Robert Read <robert.read@intel.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jian Yu [Mon, 28 Mar 2016 00:26:27 +0000 (20:26 -0400)]
staging: lustre: libcfs: replace direct HZ access with kernel APIs
On some customers' systems, the kernel was compiled with HZ defined
to 100, instead of 1000. This improves performance for HPC applications.
However, to use these systems with Lustre, customers have to re-build
Lustre for the kernel because Lustre directly uses the defined constant
HZ.
Since kernel 2.6.21, some non-HZ dependent timing APIs become non-
inline functions, which can be used in Lustre codes to replace the
direct HZ access.
These kernel APIs include:
jiffies_to_msecs()
jiffies_to_usecs()
jiffies_to_timespec()
msecs_to_jiffies()
usecs_to_jiffies()
timespec_to_jiffies()
And here are some samples of the replacement:
HZ -> msecs_to_jiffies(MSEC_PER_SEC)
n * HZ -> msecs_to_jiffies(n * MSEC_PER_SEC)
HZ / n -> msecs_to_jiffies(MSEC_PER_SEC / n)
n / HZ -> jiffies_to_msecs(n) / MSEC_PER_SEC
n / HZ * 1000 -> jiffies_to_msecs(n)
This patch replaces the direct HZ access in the libcfs module.
Oleg Drokin [Sun, 27 Mar 2016 16:05:03 +0000 (12:05 -0400)]
staging/lustre/libcfs: Copy correct amount in libcfs_ioctl_getdata
Commit b8ff756bc351 ("staging: lustre: libcfs: merge code from
libcfs_ioctl into libcfs_ioctl_getdata") introduced a problem
copying just a single pointer worth of data from userspace
instead of whole libcfs_ioctl_hdr structure.
Adjust the copying amount.
Andreas Dilger [Sat, 26 Mar 2016 19:40:56 +0000 (15:40 -0400)]
staging: lustre: libcfs: calculate crypto performance using pages
Use alloc_page() and use cfs_crypto_hash_update_page()
to compute the hash instead of cfs_crypto_hash_digest(), since
tgt_checksum_bulk() computes the hash by page anyway.
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5279
Reviewed-on: http://review.whamcloud.com/10982 Reviewed-by: John L. Hammond <john.hammond@intel.com> Reviewed-by: James Simmons <uja.ornl@gmail.com> Reviewed-by: Alexander Boyko <alexander_boyko@xyratex.com> Reviewed-by: Bob Glossman <bob.glossman@intel.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andreas Dilger [Sat, 26 Mar 2016 19:40:51 +0000 (15:40 -0400)]
staging: lustre: libcfs: bug fixes for cfs_crypto_hash_final()
Change cfs_crypto_hash_final() to always clean up the hash descrptor
instead of not doing this in error cases. All of the callers were
just calling cfs_crypto_hash_final() immediately to clean up the
descriptor anyway, and the old behaviour is unlike other init/fini
functions, and prone to memory leaks and other incorrect usage. The
callers can call cfs_crypto_digest_size() to determine the hash size
in advance if needed, and avoid complexity in cfs_crypto_hash_final().
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5053
Reviewed-on: http://review.whamcloud.com/9990 Reviewed-by: Bob Glossman <bob.glossman@intel.com> Reviewed-by: James Simmons <uja.ornl@gmail.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andreas Dilger [Sat, 26 Mar 2016 19:40:46 +0000 (15:40 -0400)]
staging: lustre: libcfs: add documentation for cfs_crypto_hash_*()
Add comment blocks for cfs_crypto_hash_*() in linux-crypto.c and
libcfs_crypto.h. Delete obsolete comment about shash handling in
cfs_crypto_hash_alloc().
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5053
Reviewed-on: http://review.whamcloud.com/9990 Reviewed-by: Bob Glossman <bob.glossman@intel.com> Reviewed-by: James Simmons <uja.ornl@gmail.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andreas Dilger [Sat, 26 Mar 2016 19:40:45 +0000 (15:40 -0400)]
staging: lustre: libcfs: limit scope of libcfs_crypto.h
Remove <libcfs/libcfs_crypto.h> from <libcfs/libcfs.h> and only
include it into the places where it is actually needed. This
works out to be the same places as <obd_cksum.h>, so put it there.
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5053
Reviewed-on: http://review.whamcloud.com/9990 Reviewed-by: Bob Glossman <bob.glossman@intel.com> Reviewed-by: James Simmons <uja.ornl@gmail.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Claudiu Beznea [Wed, 23 Mar 2016 18:37:26 +0000 (20:37 +0200)]
Staging: wlan-ng: wiphy_free() is not called in case wiphy_register() fails
This patch covers wiphy_register() failures in wlan_create_wiphy()
from cfg80211.c by calling wiphy_free() for the correspondent
struct wiphy allocated structure.
Okash Khawaja [Thu, 10 Mar 2016 20:21:35 +0000 (20:21 +0000)]
staging: speakup: fix type mismatch warnings
Compiling speakup driver with sparse produces following warning:
drivers/staging/speakup/serialio.c:22:9: warning: incorrect type in
initializer (different base types)
drivers/staging/speakup/serialio.c:22:9: expected unsigned int
[unsigned] flags
drivers/staging/speakup/serialio.c:22:9: got restricted upf_t
staging: comedi: ni_tio: remove BUG() checks for ni_tio_get_clock_src()
This function calls some helper functions to convert the counter variant
specific clock select bits into the generic enum ni_gpct_clock_source_bits
equivelent. These helper functions currently BUG() if the clock select
bits are invalid.
It then calls ni_tio_clock_period_ps() to figure out the clock period
based on the generic clock source. This function could also BUG() if
the prescale bits are invalid.
In reality this should never happen but refactor the code to return
-EINVAL instead and remove the BUG() checks.
These functions are also called by ni_tio_set_sync_mode(). When this
function is called by ni_tio_set_clock_src() the counter select bits
have already been validated.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The (*insn_config) functions are supposed to return an errno or the number
of 'data' values used for the instruction (insn->n). Currently this function
returns an errno or 0. Fix the function to work like the core expects.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: ni_tio: remove BUG() checks for ni_tio_get_gate_src()
This function calls some helper functions to convert the counter variant
specific gate select bits into the generic enum ni_gpct_clock_source_bits
equivelent. These helper functions currently BUG() if the gate select
bits are invalid.
This should never happen but refactor the code to return -EINVAL instead
and remove the BUG() checks.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Refactor the functions that determine the clock source bits so that they
return -EINVAL if the clock source is invalid. Pass the errno back to
ni_tio_insn_config().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix the checkpatch.pl issues:
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
CHECK: Prefer kernel type 'u64' over 'uint64_t'
CHECK: spinlock_t definition without comment
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move these inline functions out of the header and export them instead.
These functions have pretty generic names, rename them.
Fix the checkpatch.pl issues:
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
CHECK: Avoid crashing the kernel - try using WARN_ON & recovery code
rather than BUG() or BUG_ON()
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Only the e series gpct variant does not have counting mode registers.
Simplfy this function. For aesthetics, return bool instead of int.
This fixes the checkpatch.pl issues:
CHECK: spaces preferred around that '*' (ctx:ExV)
CHECK: Avoid crashing the kernel - try using WARN_ON & recovery code
rather than BUG() or BUG_ON()
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: ni_tio: export and fix ni_tio_set_bits()
Move the inline function from the header and export it instead.
Fix the checkpatch.pl issue:
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
The 'unsigned' vars can safely be changed to 'unsigned int'.
This allows moving ni_tio_set_bits_transient() into the driver and
making it static.
Fix the checkpatch.pl issue:
CHECK: Avoid crashing the kernel - try using WARN_ON & recovery code
rather than BUG() or BUG_ON()
The BUG_ON() is overkill. All the drivers that call this function pass
'register_index' values that are valid. Just check the 'register_index'
before updating the software copy and writing the register.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: ni_tio: export and fix ni_tio_get_soft_copy()
Move the inline function from the header and export it instead.
For the checkpatch.pl issues:
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
CHECK: Avoid crashing the kernel - try using WARN_ON & recovery code
rather than BUG() or BUG_ON()
The 'unsigned' vars can safely be changed to 'unsigned int'.
The BUG_ON() is overkill. All the drivers that call this function pass
'register_index' values that are valid. Just check the 'register_index'
and return 0 if it's not valid.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: ni_labpc: remove some unnecessary defines
The EEPROM_SIZE and NUM_AO_CHAN defines are only used once and they
don't add any significant clarity to the driver. They are also pretty
generic symbol names. Remove them and just open code the values.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 'convert_arg' sets the acquisition timing of the analog input command.
The maximum speed (the minimum timing) depends on the board 'ai_speed' which
if always >= 4000. Remove the redundant 'min' check,
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Define the pacer clock limits and remove the magic numbers. Refactor
the code to use a common path to return the actual 'ns' timing and
the timer divisor value.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This driver supports boards that have 1 or 2 TIO chips with base
addresses 0x800 apart. Replace the static const array 'GPCT_OFFSET'
with a define and calculate the base address based on the chip index.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This spinlock is only used to protect changes to the private data 'dma_cfg'.
Before calling any function that would change the 'dma_cfg' the spinlock
'mite_channel_lock' is also locked. That spinlock is not unlocked until
after the 'dma_cfg' change.
Remove the redundant spinlock.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
enum ni_gpct_register and enum ni_660x_register now have a 1:1
relationship for the NITIO_* registers. The static const array
is no longer necessary to find the proper NI660X_* register for
a given NITIO_*. Remove it and refactor the register read/write
functions.
Use the NITIO_* values to init the ni_660x_reg_data[] array and
remove the unnecessary NI660X_* enum values.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This fuction just returns a pointer from the private data. The name
might provide some confusion since it appears to be an exported
function from the mite driver.
Just remove it and get the pointer directly where needed.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: ni_660x: allocate counters early in (*auto_attach)
The ni_gpct_device_construct() could fail allocating the memory for
device and its counters. For aesthetics, call the function before
initializing the subdevices.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / linux-beck.git / log