[media] uvcvideo: Ignore GET_RES error for XU controls

GET_RES request support is mandatory for extension units, but some
cameras still choke on it (one example is the Logitech QuickCam PTZ that
returns a single byte for the PTZ relative control instead of four).

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] uvcvideo: Don't skip erroneous payloads

Instead of skipping the payload completely, which would make the
resulting image corrupted anyway, store the payload normally and mark
the buffer as erroneous. If the no_drop module parameter is set to 1 the
buffer will then be passed to userspace, and tt will then be up to the
application to decide what to do with the buffer.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] uvcvideo: Make uvc_commit_video() static

The function is not used outside of its compilation unit. Make it
static.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] uvcvideo: Add support for LogiLink Wireless Webcam

The camera requires the PROBE_MINMAX quirk. Add a corresponding entry in
the device IDs list.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] uvcvideo: Remove duplicate definitions of UVC_STREAM_* macros

The macros are defined in both drivers/media/video/uvc/uvc_video.c and
include/linux/usb/video.h. Remove definitions from the former.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] uvcvideo: Handle uvc_init_video() failure in uvc_video_enable()

Turn streaming off (by selecting alternate setting 0) and disable the
video buffers queue in the uvc_video_enable() error path.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] uvcvideo: Use videobuf2-vmalloc

Replace the current video buffers queue implementation with
videobuf2-vmalloc.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] uvcvideo: Move fields from uvc_buffer::buf to uvc_buffer

Add mem, length and bytesused fields to the uvc_buffer structure and use
them instead of accessing the uvc_buffer::buf m.offset, length and
bytesused fields directly. This prepares the driver to the conversion to
videobuf2.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tm6000: Fix check for interrupt endpoint

Checking for &dev->int_in is useless because it returns the address of
the embedded struct tm6000_endpoint, which will always be positive and
therefore true.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tm6000: Fix bad indentation

Function parameters on subsequent lines should never be aligned with the
function name but rather be indented.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tm6000: Fix fast USB access quirk

The original patch used the fast USB quirk to enable fast access to
registers in the tm6000_read_write_usb(). The applied patch moved the
check to the tm6000_reset(), probably due to some merge conflicts.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] V4L: cosmetic clean up

Improve the use of the WARN_ON() macro and use a local variable, instead
of reduntantly dereferencing a pointer in v4l2-dev.c

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] gspca - zc3xx: Bad initialization of zc305/gc0303

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] gspca - topro: Lower the frame rate in 640x480 for the tp6800

The topro webcams don't support 30fps in 640x480 mode.

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] gspca - sonixj: Change color control for sensor po2030n

Adjustment of the colors by the po2030n is finer than by the bridge controls.

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] gspca - sonixj: Bad sensor mode at start time

The 'open-drain' mode was not reset when starting the webcams.
This problem was introduced by commit 0e4d413af1a9d and
its exact effects are unknown.

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] gspca: Remove the useless variable 'nbalt'

As the alternate settings are now sorted in gspca main,
the variable 'nbalt' is no more useful.

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] gspca: Remove the useless variable 'reverse_alts'

The alternate settings are now sorted in gspca main, so the flag
'reverse_alts' is no more useful.

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] it913x: multiple devices on system. Copy ite_config to priv area

If there are two or more different it913x devices on the system they share the same
ite_config and over write its settings.

To over come this, the ite_config is copied to the priv area.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] Remove unneeded comments from the media API DocBook files

This removes comment tags intended for emacs configuration from
67 files in the Media API DocBook. Such comments are not really
helpful and violate  the coding style rules.

Signed-off-by: Sylwester Nawrocki <snjw23@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] it913x add retry to USB bulk endpoints and IO

This a bus repeater for it913x devices. Commands usually fail because of other
activity on the USB bus.

Bulk failures that report -ETIMEDOUT or -EBUSY are repeated.

Enpoints that return actlen not equal len request -EAGAIN.

The retry is set at 10.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] dvb_get_firmware: updates for it913x

Changes to extract firmware for it913x devices

./get_dvb_firmware it9135
extracts
dvb-usb-it9135-01.fw
dvb-usb-it9135-02.fw

./get_dvb_firmware it9137
extracts
dvb-usb-it9137-01.fw

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] it9135:  add support for IT9135 9005 devices

Support add for IT9135 9005 devices

With this patch IT9135 devices now move to using
dvb-usb-it9135-01.fw firmware
IT9137 remain on previous firmware.

IT9135 devices seem more stable on this firmware.

If the user wishes to remain on it9137 firmware they can change
back using firmware=1 module option.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] dvb-usb/it913x: multi firmware loader

Multi firmware loader
 This uses scatter write firmware headers
 The firmware must start with 03 XX 00
 and be the extract firmware length.

 I have tried all available firmwares with this loader.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] it913x: support for NEC extended keys

Add support for NEC extended keys.

The default remote has now changed to RC_MAP_MSI_DIGIVOX_III

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] it913x: support for different tuner regs

There appears to be differences in the tuner registers
on earlier IT9135 devices.

Using the current IT9137 settings cause corruptions on
some channels

This patch is in preparation for multi firmware loading and
current unsupported types.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] saa7164: fix endian conversion in saa7164_bus_set()

The msg->command field is 32 bits, and we should fill it with a call
to cpu_to_le32().  The current code is broke on big endian systems.
On little endian systems it truncates the 32 bit value to 16 bits
which probably still works fine.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] it913x-fe: more user and debugging info

More debugging and user info from it913x-fe.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] it913x: endpoint size changes

Previously endpoint had been aligned to packet size (128)

Some early it9135 devices appear to have problems with this.

This patch now aligns with mpeg TS size (188)

With the pid filter off max size is increased to the maxmium
size (348 * 188)

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] drxk: Switch the delivery system on FE_SET_PROPERTY

The DRX-K doesn't change the delivery system at set_properties,
but do it at frontend init. This causes problems on programs like
w_scan that, by default, opens both frontends.

Instead, explicitly set the format when set_parameters callback is
called.

Tested-by: Eddi De Pieri <eddi@depieri.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] xc5000: Add support for 7MHz bandwidth for DVB-C/DVB-T

While xc5000 supports 7MHz bandwidth, the driver were lacking the code
implementing this feature, causing tuning issues with VHF chanels
used in Countries like Italy.

After this patch:

>>> tune to: 177500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
0x0000 0x0d49: pmt_pid 0x0102 RAI -- Rai 1 (running)
0x0000 0x0d4a: pmt_pid 0x0101 RAI -- Rai 2 (running)
0x0000 0x0d4b: pmt_pid 0x0100 RAI -- Rai 3 TGR Veneto (running)
0x0000 0x0d53: pmt_pid 0x0118 RAI -- Rai News (running)
0x0000 0x0d54: pmt_pid 0x0119 Rai -- Rai 3 TGR Emilia Romagna (running)
0x0000 0x0d4c: pmt_pid 0x0103 Rai -- Rai Radio1 (running)
0x0000 0x0d4d: pmt_pid 0x0104 Rai -- Rai Radio2 (running)
0x0000 0x0d4e: pmt_pid 0x0105 Rai -- Rai Radio3 (running)
Network Name 'Rai'

Tested-by: Eddi De Pieri <eddi@depieri.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] xc5000,tda18271c2dd: Fix bandwidth calculus

While here, add a debug message, to easy detecting bugs on it.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] xc5000: Remove the global mutex lock at xc5000 firmware init

As reported by Devin Heitmueller <dheitmueller@kernellabs.com>:

> It seems like a change such as this could significantly change the
> timing of tuner initialization if you have multiple xc5000 based
> products that might have a slow i2c bus.  Was that intentional?

After discussed with Eddi de Pierri <eddi@depieri.net>, it was pointed that
the change was not intentional, and it was just a trial while developing
the patches that add support for HVR-930C.

So, remove this hack.

Reported-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Acked by: Eddi de Pierri <eddi@depieri.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tm6000: fix OOPS at tm6000_ir_int_stop() and tm6000_ir_int_start()

[ 3755.608233] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
[ 3755.616360] IP: [<ffffffffa03b80b7>] tm6000_ir_int_stop+0x10/0x1b [tm6000]

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tm6000: automatically load alsa and dvb modules

All devices should support alsa module. Devices with DVB will
auto-load the dvb module. This way, tm6000-based devices should
now have hot plugin.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tm6000: Use a 16 scancode bitmask for IR

This should allow using 24 or 32 bits NEC IR decoding tables with
those devices.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tm6000: Allow auto-detecting tm6000 devices

Now that the tm6000 driver is on a good shape, we can enable
device autodetection, based on the USB ID.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tm6000: rewrite IR support

The IR support were broken on my tests with HVR-900H. Also,
there were several issues on the current implementation.
This patch is a major rewrite of the IR support for this
- Improve debug messages;
- Don't do polling for interrrupt based IR;
- Add proper support for RC-5 protocol;
- Always provide 16 bits for NEC and RC-5;
- Fix polling code;
- Split polling functions from URB Interrupt ones;
- Don't hardcode the XTAL reference for tm6000 IR;
- If a URB submit fails, retries after 100ms;
- etc.

Tested on Hauppauge HVR-900H, with RC-5 and NEC remotes.

Issues on IR handling, on this device:
- Repeat events aren't detected (neither on NEC or RC-5);
- NEC codes are always provided with 16 bits.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tm6000: add IR support for HVR-900H

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tuner-xc2028: Better report signal strength

Fix lock bit to better indicate signal strength, from 4096 to
65535.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tm6000: Fix IR register names

IR registers 0xd9 to 0xdf were badly named, making harder to
check what's the register accessed at the RC code. Fix the
name convention.

No functional changes on this patch.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tm6000: Warning cleanup

drivers/media/video/tm6000/tm6000-video.c: In function ‘tm6000_release’:
drivers/media/video/tm6000/tm6000-video.c:1608:7: warning: unused variable ‘err’ [-Wunused-variable]

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tm6000: bugfix data check

beholder use a map with 3 bytes, but many rc maps have 2 bytes, so I add a workaround for beholder rc.

Signed-off-by: Stefan Ringel <linuxtv@stefanringel.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tm6000: bugfix at bulk transfer

Signed-off-by: Stefan Ringel <linuxtv@stefanringel.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tm6000: bugfix at interrupt reset

Signed-off-by: Stefan Ringel <linuxtv@stefanringel.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tm6000: bugfix at tm6000_set_reg_mask() register setting

Signed-off-by: Stefan Ringel <linuxtv@stefanringel.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tm6000: remove experimental depends

Signed-off-by: Stefan Ringel <linuxtv@stefanringel.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tm6000: Fix tm6010 audio standard selection

A V4L2 standards mask may contain several standards. A more restricted
mask with just one standard is used when user needs to bind to an specific
standard that can't be auto-detect among a more generic mask.

So, Improve the autodetection logic to detect the correct audio standard
most of the time.

Based on a patch made by Dmitri Belimov <d.belimov@gmail.com>.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tm6000: Add a few missing bits to alsa

There are some properties found on em28xx, but not on tm6000. Add
them, in order to be more consistent.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] V4L: omap1_camera: fix missing <linux/module.h> include

Otherwise compilation breaks with:

...

after apparently no longer included recursively from other header files.

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] staging/media: lirc_imon: add a __user annotation

This silences the following Sparse warnings:
lirc_imon.c:404:32: warning: incorrect type in argument 1 (different address spaces)
lirc_imon.c:404:32:    expected void const [noderef] <asn:1>*<noident>
lirc_imon.c:404:32:    got char const *buf
lirc_imon.c:117:28: warning: incorrect type in initializer (incompatible argument 2 (different address spaces))
lirc_imon.c:117:28:    expected long ( *write )( ... )
lirc_imon.c:117:28:    got long ( static [toplevel] *<noident> )( ... )

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] radio: NUL terminate a user string

We pass this to fm_tx_set_radio_text() which expects a NUL terminated
string.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] V4L2 spec: fix the description of V4L2_FBUF_CAP_SRC_CHROMAKEY

V4L2_FBUF_CAP_SRC_CHROMAKEY is the opposite of V4L2_FBUF_CAP_CHROMAKEY, but
according to the documentation it was the same. The terms 'video' and
'framebuffer' were accidentally swapped in the text.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
CC: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] v4l2 framework doc: clarify locking

  high-latency devices.

Thanks to Hans de Goede for our discussions on this topic.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Thanks-to: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] V4L2 Spec: clarify usage of V4L2_FBUF_FLAG_PRIMARY

As per discussion during the 2011 V4L-DVB workshop.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] V4L spec: fix typo and missing CAP_RDS documentation

For some reason the V4L2_TUNER_CAP_RDS_CONTROLS/BLOCK_IO capabilities were never
documented in the proper table. In addition, then RDS interface section incorrectly
referred to them as V4L2_TUNER_SUB_RDS_... instead of CAP_RDS_...

This is now fixed.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] go7007: Fix 2250 urb type

commit a846d8fce9e8be30046be3c512982bd0345e7015

The 2250 board uses bulk endpoint for interrupt handling,
and should use a bulk urb instead of an int urb.

Signed-off-by: Pete Eberlein <pete@sensoray.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] pwc: Use kmemdup rather than duplicating its implementation

The semantic patch that makes this change is available
in scripts/coccinelle/api/memdup.cocci.

Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx25821: Use kmemdup rather than duplicating its implementation

The semantic patch that makes this change is available
in scripts/coccinelle/api/memdup.cocci.

Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] v4l: Casting (void *) value returned by kmalloc is useless

The semantic patch that makes this change is available
in scripts/coccinelle/api/alloc/drop_kmalloc_cast.cocci.

Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] dw2102: Use kmemdup rather than duplicating its implementation

The semantic patch that makes this change is available
in scripts/coccinelle/api/memdup.cocci.

Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] drxd: Use kmemdup rather than duplicating its implementation

The semantic patch that makes this change is available
in scripts/coccinelle/api/memdup.cocci.

Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] dib9090: limit the I2C speed

The intend of this patch is to limit the maximum I2C speed.

Signed-off-by: Olivier Grenie <olivier.grenie@dibcom.fr>
Signed-off-by: Patrick Boettcher <patrick.boettcher@dibcom.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] dib8096P: add the reference board TFE8096P

The intend of this patch is to add the support for the DiBcom reference
board TFE8096P.

Signed-off-by: Olivier Grenie <olivier.grenie@dibcom.fr>
Signed-off-by: Patrick Boettcher <patrick.boettcher@dibcom.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] add the support for DiBcom dib8096P

The purpose of this patch is to support the DiBcom chip dib8096P.

Signed-off-by: Olivier Grenie <olivier.grenie@dibcom.fr>
Signed-off-by: Patrick Boettcher <patrick.boettcher@dibcom.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] dib7090: add the reference board TFE7790E

The intend of this patch is to add the support for the DiBcom reference
board TFE7790E.

Signed-off-by: Olivier Grenie <olivier.grenie@dibcom.fr>
Signed-off-by: Patrick Boettcher <patrick.boettcher@dibcom.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] DiB8000: improve the tuning and the SNR monitoring

This patches improves the tuning of the dib8000 and correct the monitoringr
of the SNR.The patch allows to faster detect that there is no ISDB-T channel
on the wanted frequency.

Signed-off-by: Olivier Grenie <olivier.grenie@dibcom.fr>
Signed-off-by: Patrick Boettcher <patrick.boettcher@dibcom.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] DiBcom: correct warnings

The intend of this patch is to correct some warnings given.

Signed-off-by: Olivier Grenie <olivier.grenie@dibcom.fr>
Signed-off-by: Patrick Boettcher <patrick.boettcher@dibcom.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] dib7090: add the reference board TFE7090E

The intend of this patch is to add the support for the DiBcom reference
board TFE7090E.

Signed-off-by: Olivier Grenie <olivier.grenie@dibcom.fr>
Signed-off-by: Patrick Boettcher <patrick.boettcher@dibcom.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] dib7000p/dib0090: update the driver

This patch intends to update the dib7000p and dib0090 driver in order to
improve the performances.

Signed-off-by: Olivier Grenie <olivier.grenie@dibcom.fr>
Signed-off-by: Patrick Boettcher <patrick.boettcher@dibcom.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] staging: as102: Add support for Sky Italia Digital Key based on the same chip

Add support for the Sky Italia Digital Key, an USB dongle offered
by Sky Italia to its customers for use with their satellite set-top-boxes.
This is the "green led" model based on the Abilis as102 chip, while the
so called "blue led" model is based on the Avermedia A867 design.

Cc: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Sylwester Nawrocki <snjw23@gmail.com>
Signed-off-by: Gianluca Gennari <gennarone@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] em28xx: Add Terratec Cinergy HTC Stick

Signed-off-by: Andreas Oberritter <obi@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] easycap: fix warnings: variable set but not used

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] easycap: drop usb_class_driver

Drop usb_class_driver and collaterals as it is not used

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] easycap: add easycap prefix to global functions names

Add easycap prefix to global function to reduce
possibility of name collision.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] easycap: remove unused members of struct easycap

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] easycap: easycap_usb_driver should be static to easycap_main.c

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] easycap: use usb_kill_urb wrapper functions

1. kill_video_usb can be used in all places where video urbs are killed
and reduce code repetition

2. remove unnecessary check for easycap == NULL in the function
as it is always checked by the calling function

3. rename the function to easycap_video_kill_urb to reduce
possibility of name conflict

4. implement also easycap_audio_kill_urb

5. simplify freeing urbs

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] easycap: drop initializations to 0 in the probe functions

peasycap was allocated using kzalloc so drop all
to zero initializations

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] easycap: streamline the code

change statements of types
if (err)
return err
else
do something

and
if (ok)
do something
else
return err

into

if (err)
return err

do something

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] easycap: compress initialization tables

1. saa and stk initialization tables are less then
256 entries
2. stk table can fit into u16 and saa into u8

size before
 text    data     bss     dec     hex filename
 105687    1072 1134800 1241559  12f1d7 easycap.ko

size after

 text    data     bss     dec     hex filename
 97919    1072 1134800 1233791  12d37f easycap.ko

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] easycap: remove linux/version.h include from easycap_ioctl.c

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] easycap: cleanup function usage

1. Remove declarations of none global functions from easycap.h
and make them static in the c-files.
2. Reorder static functions to reduce number of forward declarations.
3. Remove unused functions.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx25821.h: Line up defines

Line up constant defines to the same column.

Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx25821-video.c: Change line endings

Change obscure line endings to less obscure ones. (improve readability)

Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx25821-video.c: Fix indent

Fix indent of statements to improve readability.

Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx25821-video.c: Move operators

Move operator in complex expression to the end of the line to preserve
consistency.

Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx25821-video.c: Fix definitions

Change multiple definitions in one statement into multiple statements
with one definition per statement.

Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx25821-video.c: Fix assignment

Change double assignment in one statement into two assignment
statements.

Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx25821-video.c: Change spaces

Change double spaces between lexemes into single spaces.

Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx25821-video.c: Delete empty line

Delete unnecessary empty line.

Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx25821-video-upstream.c: Change line endings

Change obscure line endings to less obscure ones. (improve readability)

Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx25821-video-upstream.c: Fix indent

Change indent of statements to use tabs and to improve readability.

Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx25821-video-upstream.c: Remove braces

Delete curly braces around single if-else statements.

Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx25821-video-upstream-ch2.c: Change line endings

Change obscure line endings to less obscure ones. (improve readability)

Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx25821-video-upstream-ch2.c: Remove braces

Remove unnecessary curly braces around single if statement.

Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx25821-video-upsstream-ch2.c: Move operators

Move operators in complex expressions to the end of the lines to
preserve consistency.

Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx25821-video-upstream-ch2.c: Fix indent

Change indent of statements with (less than 8) spaces to indent with
tabs.

Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx25821-video-upstream-ch2.c: Line up comments

Line up comments to match indent of surrounding statements.

Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx25821-medusa-video.c: Change line endings

Change obscure line endings to less obscure ones. (improve readability)

Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>