Chris Mason [Fri, 21 Aug 2015 17:05:39 +0000 (10:05 -0700)]
btrfs: fix compile when block cgroups are not enabled
bio->bi_css and bio->bi_ioc don't exist when block cgroups are not on.
This adds an ifdef around them. It's not perfect, but our
use of bi_ioc is being removed in the 4.3 merge window.
The bi_css usage really should go into bio_clone, but I want to make
sure that doesn't introduce problems for other bio_clone use cases.
Filipe Manana [Wed, 19 Aug 2015 10:09:40 +0000 (11:09 +0100)]
Btrfs: fix file read corruption after extent cloning and fsync
If we partially clone one extent of a file into a lower offset of the
file, fsync the file, power fail and then mount the fs to trigger log
replay, we can get multiple checksum items in the csum tree that overlap
each other and result in checksum lookup failures later. Those failures
can make file data read requests assume a checksum value of 0, but they
will not return an error (-EIO for example) to userspace exactly because
the expected checksum value 0 is a special value that makes the read bio
endio callback return success and set all the bytes of the corresponding
page with the value 0x01 (at fs/btrfs/inode.c:__readpage_endio_check()).
From a userspace perspective this is equivalent to file corruption
because we are not returning what was written to the file.
Details about how this can happen, and why, are included inline in the
following reproducer test case for fstests and the comment added to
tree-log.c.
seq=`basename $0`
seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
tmp=/tmp/$$
status=1 # failure is the default!
trap "_cleanup; exit \$status" 0 1 2 3 15
_cleanup()
{
_cleanup_flakey
rm -f $tmp.*
}
# get standard environment, filters and checks
. ./common/rc
. ./common/filter
. ./common/dmflakey
# real QA test starts here
_need_to_be_root
_supported_fs btrfs
_supported_os Linux
_require_scratch
_require_dm_flakey
_require_cloner
_require_metadata_journaling $SCRATCH_DEV
# Create our test file with a single 100K extent starting at file
# offset 800K. We fsync the file here to make the fsync log tree gets
# a single csum item that covers the whole 100K extent, which causes
# the second fsync, done after the cloning operation below, to not
# leave in the log tree two csum items covering two sub-ranges
# ([0, 20K[ and [20K, 100K[)) of our extent.
$XFS_IO_PROG -f -c "pwrite -S 0xaa 800K 100K" \
-c "fsync" \
$SCRATCH_MNT/foo | _filter_xfs_io
# Now clone part of our extent into file offset 400K. This adds a file
# extent item to our inode's metadata that points to the 100K extent
# we created before, using a data offset of 20K and a data length of
# 20K, so that it refers to the sub-range [20K, 40K[ of our original
# extent.
$CLONER_PROG -s $((800 * 1024 + 20 * 1024)) -d $((400 * 1024)) \
-l $((20 * 1024)) $SCRATCH_MNT/foo $SCRATCH_MNT/foo
# Now fsync our file to make sure the extent cloning is durably
# persisted. This fsync will not add a second csum item to the log
# tree containing the checksums for the blocks in the sub-range
# [20K, 40K[ of our extent, because there was already a csum item in
# the log tree covering the whole extent, added by the first fsync
# we did before.
$XFS_IO_PROG -c "fsync" $SCRATCH_MNT/foo
echo "File digest before power failure:"
md5sum $SCRATCH_MNT/foo | _filter_scratch
# Silently drop all writes and ummount to simulate a crash/power
# failure.
_load_flakey_table $FLAKEY_DROP_WRITES
_unmount_flakey
# Allow writes again, mount to trigger log replay and validate file
# contents.
# The fsync log replay first processes the file extent item
# corresponding to the file offset 400K (the one which refers to the
# [20K, 40K[ sub-range of our 100K extent) and then processes the file
# extent item for file offset 800K. It used to happen that when
# processing the later, it erroneously left in the csum tree 2 csum
# items that overlapped each other, 1 for the sub-range [20K, 40K[ and
# 1 for the whole range of our extent. This introduced a problem where
# subsequent lookups for the checksums of blocks within the range
# [40K, 100K[ of our extent would not find anything because lookups in
# the csum tree ended up looking only at the smaller csum item, the
# one covering the subrange [20K, 40K[. This made read requests assume
# an expected checksum with a value of 0 for those blocks, which caused
# checksum verification failure when the read operations finished.
# However those checksum failure did not result in read requests
# returning an error to user space (like -EIO for e.g.) because the
# expected checksum value had the special value 0, and in that case
# btrfs set all bytes of the corresponding pages with the value 0x01
# and produce the following warning in dmesg/syslog:
#
# "BTRFS warning (device dm-0): csum failed ino 257 off 917504 csum\
# 1322675045 expected csum 0"
#
_load_flakey_table $FLAKEY_ALLOW_WRITES
_mount_flakey
echo "File digest after log replay:"
# Must match the same digest he had after cloning the extent and
# before the power failure happened.
md5sum $SCRATCH_MNT/foo | _filter_scratch
_unmount_flakey
status=0
exit
Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Chris Mason <clm@fb.com>
Filipe Manana [Wed, 12 Aug 2015 10:54:35 +0000 (11:54 +0100)]
Btrfs: check if previous transaction aborted to avoid fs corruption
While we are committing a transaction, it's possible the previous one is
still finishing its commit and therefore we wait for it to finish first.
However we were not checking if that previous transaction ended up getting
aborted after we waited for it to commit, so we ended up committing the
current transaction which can lead to fs corruption because the new
superblock can point to trees that have had one or more nodes/leafs that
were never durably persisted.
The following sequence diagram exemplifies how this is possible:
btrfs_write_and_wait_transaction() continues
writing ebs
--> fails writing eb X, we abort transaction N
and set bit BTRFS_FS_STATE_ERROR on
fs_info->fs_state, so no new transactions
can start after setting that bit
cleanup_transaction()
btrfs_cleanup_one_transaction()
wakes up task at CPU 1
continues, doesn't abort because
cur_trans->aborted (transaction N + 1)
is zero, and no checks for bit
BTRFS_FS_STATE_ERROR in fs_info->fs_state
are made
btrfs_write_and_wait_transaction(trans, root);
--> succeeds, no errors during writeback
write_ctree_super(trans, root, 0);
--> succeeds
--> we have now a superblock that points us
to some root that uses eb X, which was
never written to disk
In this scenario future attempts to read eb X from disk results in an
error message like "parent transid verify failed on X wanted Y found Z".
So fix this by aborting the current transaction if after waiting for the
previous transaction we verify that it was aborted.
Cc: stable@vger.kernel.org Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Reviewed-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Chris Mason <clm@fb.com>
Michal Hocko [Wed, 19 Aug 2015 12:17:41 +0000 (14:17 +0200)]
btrfs: use __GFP_NOFAIL in alloc_btrfs_bio
alloc_btrfs_bio relies on GFP_NOFS allocation when committing the
transaction but this allocation context is rather weak wrt. reclaim
capabilities. The page allocator currently tries hard to not fail these
allocations if they are small (<=PAGE_ALLOC_COSTLY_ORDER) but it can
still fail if the _current_ process is the OOM killer victim. Moreover
there is an attempt to move away from the default no-fail behavior and
allow these allocation to fail more eagerly. This would lead to:
[ 37.928625] kernel BUG at fs/btrfs/extent_io.c:4045
which is clearly undesirable and the nofail behavior should be explicit
if the allocation failure cannot be tolerated.
Signed-off-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
Michal Hocko [Wed, 19 Aug 2015 12:17:40 +0000 (14:17 +0200)]
btrfs: Prevent from early transaction abort
Btrfs relies on GFP_NOFS allocation when committing the transaction but
this allocation context is rather weak wrt. reclaim capabilities. The
page allocator currently tries hard to not fail these allocations if
they are small (<=PAGE_ALLOC_COSTLY_ORDER) so this is not a problem
currently but there is an attempt to move away from the default no-fail
behavior and allow these allocation to fail more eagerly. And this would
lead to a pre-mature transaction abort as follows:
Zhaolei [Mon, 17 Aug 2015 10:44:45 +0000 (18:44 +0800)]
btrfs: Remove useless condition in start_log_trans()
Dan Carpenter <dan.carpenter@oracle.com> reported a smatch warning
for start_log_trans():
fs/btrfs/tree-log.c:178 start_log_trans()
warn: we tested 'root->log_root' before and it was 'false'
fs/btrfs/tree-log.c
147 if (root->log_root) {
We test "root->log_root" here.
...
Reason:
Condition of:
fs/btrfs/tree-log.c:178: if (!root->log_root) {
is not necessary after commit: 7237f1833
It caused a smatch warning, and no functionally error.
Fix:
Deleting above condition will make smatch shut up,
but a better way is to do cleanup for start_log_trans()
to remove duplicated code and make code more readable.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com> Signed-off-by: Chris Mason <clm@fb.com>
Chris Mason [Thu, 2 Jul 2015 20:57:22 +0000 (13:57 -0700)]
Btrfs: add support for blkio controllers
This attaches accounting information to bios as we submit them so the
new blkio controllers can throttle on btrfs filesystems.
Not much is required, we're just associating bios with blkcgs during clone,
calling wbc_init_bio()/wbc_account_io() during writepages submission,
and attaching the bios to the current context during direct IO.
Finally if we are splitting bios during btrfs_map_bio, this attaches
accounting information to the split.
The end result is able to throttle nicely on single disk filesystems. A
little more work is required for multi-device filesystems.
Byongho Lee [Fri, 10 Jul 2015 04:10:26 +0000 (13:10 +0900)]
Btrfs: remove unused mutex from struct 'btrfs_fs_info'
The code using 'ordered_extent_flush_mutex' mutex has removed by below
commit.
- 8d875f95da43c6a8f18f77869f2ef26e9594fecc
btrfs: disable strict file flushes for renames and truncates
But the mutex still lives in struct 'btrfs_fs_info'.
So, this patch removes the mutex from struct 'btrfs_fs_info' and its
initialization code.
Signed-off-by: Byongho Lee <bhlee.kernel@gmail.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
Omar Sandoval [Fri, 19 Jun 2015 18:52:52 +0000 (11:52 -0700)]
Btrfs: fix parity scrub of RAID 5/6 with missing device
When testing the previous patch, Zhao Lei reported a similar bug when
attempting to scrub a degraded RAID 5/6 filesystem with a missing
device, leading to NULL pointer dereferences from the RAID 5/6 parity
scrubbing code.
The first cause was the same as in the previous patch: attempting to
call bio_add_page() on a missing block device. To fix this,
scrub_extent_for_parity() can just mark the sectors on the missing
device as errors instead of attempting to read from it.
Additionally, the code uses scrub_remap_extent() to map the extent of
the corresponding data stripe, but the extent wasn't already mapped. If
scrub_remap_extent() finds a missing block device, it doesn't initialize
extent_dev, so we're left with a NULL struct btrfs_device. The solution
is to use btrfs_map_block() directly.
Reported-by: Zhao Lei <zhaolei@cn.fujitsu.com> Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
Omar Sandoval [Fri, 19 Jun 2015 18:52:51 +0000 (11:52 -0700)]
Btrfs: fix device replace of a missing RAID 5/6 device
The original implementation of device replace on RAID 5/6 seems to have
missed support for replacing a missing device. When this is attempted,
we end up calling bio_add_page() on a bio with a NULL ->bi_bdev, which
crashes when we try to dereference it. This happens because
btrfs_map_block() has no choice but to return us the missing device
because RAID 5/6 don't have any alternate mirrors to read from, and a
missing device has a NULL bdev.
The idea implemented here is to handle the missing device case
separately, which better only happen when we're replacing a missing RAID
5/6 device. We use the new BTRFS_RBIO_REBUILD_MISSING operation to
reconstruct the data from parity, check it with
scrub_recheck_block_checksum(), and write it out with
scrub_write_block_to_dev_replace().
Reported-by: Philip <bugzilla@philip-seeger.de>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=96141 Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
The current RAID 5/6 recovery code isn't quite prepared to handle
missing devices. In particular, it expects a bio that we previously
attempted to use in the read path, meaning that it has valid pages
allocated. However, missing devices have a NULL blkdev, and we can't
call bio_add_page() on a bio with a NULL blkdev. We could do manual
manipulation of bio->bi_io_vec, but that's pretty gross. So instead, add
a separate path that allows us to manually add pages to the rbio.
Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
Omar Sandoval [Fri, 19 Jun 2015 18:52:49 +0000 (11:52 -0700)]
Btrfs: count devices correctly in readahead during RAID 5/6 replace
Commit 5fbc7c59fd22 ("Btrfs: fix unfinished readahead thread for raid5/6
degraded mounting") fixed a problem where we would skip a missing device
when we shouldn't have because there are no other mirrors to read from
in RAID 5/6. After commit 2c8cdd6ee4e7 ("Btrfs, replace: write dirty
pages into the replace target device"), the fix doesn't work when we're
doing a missing device replace on RAID 5/6 because the replace device is
counted as a mirror so we're tricked into thinking we can safely skip
the missing device. The fix is to count only the real stripes and decide
based on that.
Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
Omar Sandoval [Fri, 19 Jun 2015 18:52:48 +0000 (11:52 -0700)]
Btrfs: remove misleading handling of missing device scrub
scrub_submit() claims that it can handle a bio with a NULL block device,
but this is misleading, as calling bio_add_page() on a bio with a NULL
->bi_bdev would've already crashed. Delete this, as we're about to
properly handle a missing block device.
Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
Mark Fasheh [Tue, 30 Jun 2015 21:42:06 +0000 (14:42 -0700)]
btrfs: fix clone / extent-same deadlocks
Clone and extent same lock their source and target inodes in opposite order.
In addition to this, the range locking in clone doesn't take ordering into
account. Fix this by having clone use the same locking helpers as
btrfs-extent-same.
In addition, I do a small cleanup of the locking helpers, removing a case
(both inodes being the same) which was poorly accounted for and never
actually used by the callers.
Signed-off-by: Mark Fasheh <mfasheh@suse.de> Reviewed-by: David Sterba <dsterba@suse.cz> Signed-off-by: Chris Mason <clm@fb.com>
extent 1~n and 4k extent can be merged during defrag, and the whole
defrag bytes is larger than our defrag thresh(256k), 4k extent as a
tail is left unmerged since we check if its next extent can be merged
(the next one is a hole, so the check will fail), the layout thus can
be
[new extent][4k extent][HOLE][extent x]
(1~n)
To fix it, beside looking at the next one, this also looks at the
previous one by checking @defrag_end, which is set to 0 when we
decide to stop merging contiguous extents, otherwise, we can merge
the previous one with our extent.
Also, this makes btrfs behave consistent with how xfs and ext4 do.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Chris Mason <clm@fb.com>
Liu Bo [Tue, 28 Jul 2015 10:03:30 +0000 (18:03 +0800)]
Btrfs: fix warning in backref walking
When we do backref walking, we search firstly in queued delayed refs
and then the on-disk backrefs, but we parse differently for shared
references, for delayed refs we also add 'ref->root' while for on-disk
backrefs we don't, this can prevent us from merging refs indexed
by the same bytenr and cause find_parent_nodes() to throw a warning at
'WARN_ON(ref->count < 0)', for example, when we have a shared data extent
with 'ref_cnt=1' and a delayed shared data with a BTRFS_DROP_DELAYED_REF,
that happens.
For shared references, no matter if it's delayed or on-disk, ref->root is
not at all used, instead it's ref->parent that really matters, so this has
delayed refs handled as the same way as on-disk refs.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Chris Mason <clm@fb.com>
Zhaolei [Thu, 6 Aug 2015 14:39:36 +0000 (22:39 +0800)]
btrfs: Add WARN_ON() for double lock in btrfs_tree_lock()
When a task trying to double lock a extent buffer, there are no
lockdep warning about it because this lock may be in "blocking_lock"
state, and make us hard to debug.
This patch add a WARN_ON() for above condition, it can not report
all deadlock cases(as lock between tasks), but at least helps us
some.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com> Signed-off-by: Chris Mason <clm@fb.com>
Zhaolei [Thu, 6 Aug 2015 13:56:58 +0000 (21:56 +0800)]
btrfs: abort transaction on btrfs_reloc_cow_block()
When btrfs_reloc_cow_block() failed in __btrfs_cow_block(), current
code just return a err-value to caller, but leave new_created extent
buffer exist and locked.
Then subsequent code (in relocate) try to lock above eb again,
and caused deadlock without any dmesg.
(eb lock use wait_event(), so no lockdep message)
It is hard to do recover work in __btrfs_cow_block() at this error
point, but we can abort transaction to avoid deadlock and operate on
unstable state.a
It also helps developer to find wrong place quickly.
(better than a frozen fs without any dmesg before patch)
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com> Signed-off-by: Chris Mason <clm@fb.com>
Zhaolei [Wed, 5 Aug 2015 10:00:02 +0000 (18:00 +0800)]
btrfs: Error handle for get_ref_objectid_v0() in relocate_block_group()
We need error checking code for get_ref_objectid_v0() in
relocate_block_group(), to avoid unpredictable result, especially
for accessing uninitialized value(when function failed) after
this line.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
Zhaolei [Wed, 5 Aug 2015 08:43:30 +0000 (16:43 +0800)]
btrfs: Fix data checksum error cause by replace with io-load.
xfstests btrfs/070 sometimes failed.
In my test machine, its fail rate is about 30%.
In another vm(vmware), its fail rate is about 50%.
Reason:
btrfs/070 do replace and defrag with fsstress simultaneously,
after above operation, checksum error is found by scrub.
Actually, it have no relationship with defrag operation, only
replace with fsstress can trigger this bug.
New data writen to target device have possibility rewrited by
old data from source device by replace code in debug, to avoid
above problem, we can set target block group to readonly in
replace period, so new data requested by other operation will
not write to same place with replace code.
Before patch(4.1-rc3):
30% failed in 100 xfstests.
After patch:
0% failed in 300 xfstests.
It also happened in btrfs/071 as it's another scrub with IO load tests.
Reported-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com> Signed-off-by: Chris Mason <clm@fb.com>
Zhaolei [Wed, 5 Aug 2015 08:43:28 +0000 (16:43 +0800)]
btrfs: Separate scrub_blocked_if_needed() to scrub_pause_on/off()
It can reduce current duplicated code which is similar to
scrub_blocked_if_needed() but can not call it because little
different.
It also used by my next patch which is in same case.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com> Signed-off-by: Chris Mason <clm@fb.com>
Zhao Lei [Wed, 22 Jul 2015 05:14:48 +0000 (13:14 +0800)]
btrfs: Bypass unrelated items before accessing its contents in scrub
When we access extent_root in scrub_stripe() and
scrub_raid56_parity(), we need bypass unrelated tree item firstly
before using its contents to do other condition.
It is not a bug fix, only making code sequence in logic.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com> Signed-off-by: Chris Mason <clm@fb.com>
Zhao Lei [Wed, 22 Jul 2015 05:14:47 +0000 (13:14 +0800)]
btrfs: Load only necessary csums into list in scrub
We need not load csum of whole strip in scrub because strip is trimed
before use, it is to say, what we really need to calculate csum is
data between [extent_logical, extent_len).
This patch changed to use above segment for btrfs_lookup_csums_range()
in scrub_stripe()
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com> Signed-off-by: Chris Mason <clm@fb.com>
Zhao Lei [Tue, 21 Jul 2015 07:42:26 +0000 (15:42 +0800)]
btrfs: Fix calculate typo caused by ambiguous meaning of logic_end
For example, in scrub_raid56_parity(), following lines are used
to judge is all data processed:
place1: if (key.objectid > logic_end) ...
place2: if (logic_start >= logic_end) ...
...
(place2 is typo, is should be ">", it is copied from other
place, where logic_end's meaning is different, long story...)
We can fix above typo directly, but the root reason is ambiguous
meaning of logic_end in scrub raid56 parity.
In other place, XXX_end is pointed to data which is not included,
and we need to process segment of [XXX_start, XXX_end).
But for scrub raid56 parity, logic_end is pointed to lattest data
need to process, and introduced many "+ 1" and "- 1" in code as
below:
length = sparity->logic_end - sparity->logic_start + 1
logic_end - logic_start + 1
stripe_logical + increment - 1
This patch changed logic_end's meaning to make it in normal understanding
in raid56 parity functions and data struct alone with above bugfix.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com> Signed-off-by: Chris Mason <clm@fb.com>
Zhao Lei [Mon, 20 Jul 2015 09:54:50 +0000 (17:54 +0800)]
btrfs: Show detail information when mount failed on missing devices
When mount failed because missing device, we can see following
dmesg:
[ 1060.267743] BTRFS: too many missing devices, writeable mount is not allowed
[ 1060.273158] BTRFS: open_ctree failed
This patch add missing_device_number and tolerated_missing_device_number
to above output, to let user know what really happened, and helps
bug-report and debug.
dmesg after patch:
[ 127.050367] BTRFS: missing devices(1) exceeds the limit(0), writeable mount is not allowed
[ 127.056099] BTRFS: open_ctree failed
Changelog v1->v2:
1: Changed to more clear description, suggested-by:
Anand Jain <anand.jain@oracle.com>
Suggested-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com> Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: Chris Mason <clm@fb.com>
Zhao Lei [Thu, 23 Jul 2015 04:29:49 +0000 (12:29 +0800)]
btrfs: Fix scrub panic when leaf crosses stripes
Scrub panic in following operation:
mkfs.ext4 /dev/vdh
btrfs-convert /dev/vdh
mount /dev/vdh /mnt/tmp1
btrfs scrub start -B /dev/vdh
(panic)
Reason:
1: In some case, leaf created by btrfs-convert was splited into 2
strips.
2: Scrub bypassed part of above wrong leaf data, but remain data
caused panic in scrub_checksum_tree_block().
For reason 1:
we can get following information after some simple operation.
a. mkfs.ext4 /dev/vdh
btrfs-convert /dev/vdh
b. btrfs-debug-tree /dev/vdh
we can see following item in extent tree:
item 25 key (27054080 METADATA_ITEM 0) itemoff 15083 itemsize 33
Its logical address is [27054080, 27070464)
and acrossed 2 strips:
[27000832, 27066368)
[27066368, 27131904)
Will be fixed in btrfs-progs(btrfs-convert, btrfsck, ...)
For reason 2:
Scrub is trying to do a "bypass" in this case, but the result is
"panic", because current code lacks of some condition in bypass,
and let some wrong leaf data escaped.
This patch fixed above scrub code.
Before patch:
# btrfs scrub start -B /dev/vdh
(panic)
Filipe Manana [Wed, 5 Aug 2015 15:49:08 +0000 (16:49 +0100)]
Btrfs: fix stale dir entries after removing a link and fsync
We have one more case where after a log tree is replayed we get
inconsistent metadata leading to stale directory entries, due to
some directories having entries pointing to some inode while the
inode does not have a matching BTRFS_INODE_[REF|EXTREF]_KEY item.
To trigger the problem we need to have a file with multiple hard links
belonging to different parent directories. Then if one of those hard
links is removed and we fsync the file using one of its other links
that belongs to a different parent directory, we end up not logging
the fact that the removed hard link doesn't exists anymore in the
parent directory.
Simple reproducer:
seq=`basename $0`
seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
tmp=/tmp/$$
status=1 # failure is the default!
trap "_cleanup; exit \$status" 0 1 2 3 15
_cleanup()
{
_cleanup_flakey
rm -f $tmp.*
}
# get standard environment, filters and checks
. ./common/rc
. ./common/filter
. ./common/dmflakey
# real QA test starts here
_need_to_be_root
_supported_fs generic
_supported_os Linux
_require_scratch
_require_dm_flakey
_require_metadata_journaling $SCRATCH_DEV
# Create our test directory and file.
mkdir $SCRATCH_MNT/testdir
touch $SCRATCH_MNT/foo
ln $SCRATCH_MNT/foo $SCRATCH_MNT/testdir/foo2
ln $SCRATCH_MNT/foo $SCRATCH_MNT/testdir/foo3
# Make sure everything done so far is durably persisted.
sync
# Now we remove one of our file's hardlinks in the directory testdir.
unlink $SCRATCH_MNT/testdir/foo3
# We now fsync our file using the "foo" link, which has a parent that
# is not the directory "testdir".
$XFS_IO_PROG -c "fsync" $SCRATCH_MNT/foo
# Silently drop all writes and unmount to simulate a crash/power
# failure.
_load_flakey_table $FLAKEY_DROP_WRITES
_unmount_flakey
# Allow writes again, mount to trigger journal/log replay.
_load_flakey_table $FLAKEY_ALLOW_WRITES
_mount_flakey
# After the journal/log is replayed we expect to not see the "foo3"
# link anymore and we should be able to remove all names in the
# directory "testdir" and then remove it (no stale directory entries
# left after the journal/log replay).
echo "Entries in testdir:"
ls -1 $SCRATCH_MNT/testdir
generic/107 3s ... - output mismatch (see .../results/generic/107.out.bad)
--- tests/generic/107.out 2015-08-01 01:39:45.807462161 +0100
+++ /home/fdmanana/git/hub/xfstests/results//generic/107.out.bad
@@ -1,3 +1,5 @@
QA output created by 107
Entries in testdir:
foo2
+foo3
+rmdir: failed to remove '/home/fdmanana/btrfs-tests/scratch_1/testdir': Directory not empty
...
_check_btrfs_filesystem: filesystem on /dev/sdc is inconsistent \
(see /home/fdmanana/git/hub/xfstests/results//generic/107.full)
_check_dmesg: something found in dmesg (see .../results/generic/107.dmesg)
Ran: generic/107
Failures: generic/107
Failed 1 of 1 tests
$ cat /home/fdmanana/git/hub/xfstests/results//generic/107.full
(...)
checking fs roots
root 5 inode 257 errors 200, dir isize wrong
unresolved ref dir 257 index 3 namelen 4 name foo3 filetype 1 errors 5, no dir item, no inode ref
(...)
So fix this by logging all parent inodes, current and old ones, to make
sure we do not get stale entries after log replay. This is not a simple
solution such as triggering a full transaction commit because it would
imply full transaction commit when an inode is fsynced in the same
transaction that modified it and reloaded it after eviction (because its
last_unlink_trans is set to the same value as its last_trans as of the
commit with the title "Btrfs: fix stale dir entries after unlink, inode
eviction and fsync"), and it would also make fstest generic/066 fail
since one of the fsyncs triggers a full commit and the next fsync will
not find the inode in the log anymore (therefore not removing the xattr).
Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
Naohiro Aota [Tue, 30 Jun 2015 02:25:43 +0000 (11:25 +0900)]
btrfs: fix search key advancing condition
The search key advancing condition used in copy_to_sk() is loose. It can
advance the key even if it reaches sk->max_*: e.g. when the max key = (512,
1024, -1) and the current key = (512, 1025, 10), it increments the
offset by 1, continues hopeless search from (512, 1025, 11). This issue
make ioctl() to take unexpectedly long time scanning all the leaf a blocks
one by one.
This commit fix the problem using standard way of key comparison:
btrfs_comp_cpu_keys()
Signed-off-by: Naohiro Aota <naota@elisp.net> Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
Filipe Manana [Wed, 29 Jul 2015 16:21:17 +0000 (17:21 +0100)]
Btrfs: teach backref walking about backrefs with underflowed offset values
When cloning/deduplicating file extents (through the clone and extent_same
ioctls) we can get data back references with offset values that are a
result of an unsigned integer arithmetic underflow, that is, values that
are much larger then they could be otherwise.
This is not a problem when decrementing or dropping the back references
(happens when we overwrite the extents or punch a hole for example, through
__btrfs_drop_extents()), since we compute the same too large offset value,
but it is a problem for the backref walking code, used by an incremental
send and the ioctls that are used by the btrfs tool "inspect-internal"
commands, as it makes it miss the corresponding file extent items because
the search key is set for an extent item that starts at an offset matching
the exceptionally large offset value of the data back reference. For an
incremental send this causes the send ioctl to fail with -EIO.
So teach the backref walking code to deal with these cases by setting the
search key's offset to 0 if the backref's offset value is larger than
LLONG_MAX (the largest possible file offset). This makes sure the backref
walking code finds the corresponding file extent items at the expense of
scanning more items and leafs in the btree.
Fixing the clone/dedup ioctls to not produce such underflowed results would
require major changes breaking backward compatibility, updating user space
tools, etc.
Simple reproducer case for fstests:
seq=`basename $0`
seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
tmp=/tmp/$$
status=1 # failure is the default!
trap "_cleanup; exit \$status" 0 1 2 3 15
# Create our test file with a single extent of 64K starting at file
# offset 128K.
$XFS_IO_PROG -f -c "pwrite -S 0xaa 128K 64K" $SCRATCH_MNT/foo \
| _filter_xfs_io
# Now clone parts of the original extent into lower offsets of the file.
#
# The first clone operation adds a file extent item to file offset 0
# that points to our initial extent with a data offset of 16K. The
# corresponding data back reference in the extent tree has an offset of
# 18446744073709535232, which is the result of file_offset - data_offset
# = 0 - 16K.
#
# The second clone operation adds a file extent item to file offset 16K
# that points to our initial extent with a data offset of 48K. The
# corresponding data back reference in the extent tree has an offset of
# 18446744073709518848, which is the result of file_offset - data_offset
# = 16K - 48K.
#
# Those large back reference offsets (result of unsigned arithmetic
# underflow) confused the back reference walking code (used by an
# incremental send and the multiple inspect-internal ioctls) and made it
# miss the back references, which for the case of an incremental send it
# made it fail with -EIO and print a message like the following to
# dmesg:
#
# "BTRFS error (device sdc): did not find backref in send_root. \
# inode=257, offset=0, disk_byte=12845056 found extent=12845056"
#
$CLONER_PROG -s $(((128 + 16) * 1024)) -d 0 -l $((16 * 1024)) \
$SCRATCH_MNT/foo $SCRATCH_MNT/foo
$CLONER_PROG -s $(((128 + 48) * 1024)) -d $((16 * 1024)) \
-l $((16 * 1024)) $SCRATCH_MNT/foo $SCRATCH_MNT/foo
echo "File digest in the original filesystem:"
md5sum $SCRATCH_MNT/mysnap2/foo | _filter_scratch
# Now recreate the filesystem by receiving both send streams and verify
# we get the same file contents that the original filesystem had.
_scratch_unmount
_scratch_mkfs >>$seqres.full 2>&1
_scratch_mount
echo "File digest in the new filesystem:"
md5sum $SCRATCH_MNT/mysnap2/foo | _filter_scratch
status=0
exit
The test's expected golden output is:
wrote 65536/65536 bytes at offset 131072
XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
File digest in the original filesystem: 6c6079335cff141b8a31233ead04cbff SCRATCH_MNT/mysnap2/foo
File digest in the new filesystem: 6c6079335cff141b8a31233ead04cbff SCRATCH_MNT/mysnap2/foo
But it failed with:
(...)
@@ -1,7 +1,5 @@
QA output created by 097
wrote 65536/65536 bytes at offset 131072
XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
-File digest in the original filesystem:
-6c6079335cff141b8a31233ead04cbff SCRATCH_MNT/mysnap2/foo
-File digest in the new filesystem:
-6c6079335cff141b8a31233ead04cbff SCRATCH_MNT/mysnap2/foo
...
Filipe Manana [Thu, 23 Jul 2015 23:00:19 +0000 (00:00 +0100)]
Btrfs: fix stale dir entries after unlink, inode eviction and fsync
If we remove a hard link from an inode, the inode gets evicted, then
we fsync the inode and then power fail/crash, when the log tree is
replayed, the parent directory inode still has entries pointing to
the name that no longer exists, while our inode no longer has the
BTRFS_INODE_REF_KEY item matching the deleted hard link (as expected),
leaving the filesystem in an inconsistent state. The stale directory
entries can not be deleted (an attempt to delete them causes -ESTALE
errors), which makes it impossible to delete the parent directory.
This happens because we track the id of the transaction where the last
unlink operation for the inode happened (last_unlink_trans) in an
in-memory only field of the inode, that is, a value that is never
persisted in the inode item stored on the fs/subvol btree. So if an
inode is evicted and loaded again, the value for last_unlink_trans is
set to 0, which prevents the fsync from logging the parent directory
at btrfs_log_inode_parent(). So fix this by setting last_unlink_trans
to the id of the transaction that last modified the inode when we
load the inode. This is a pessimistic approach but it always ensures
correctness with the trade off of ocassional full transaction commits
when an fsync is done against the inode in the same transaction where
it was evicted and reloaded when our inode is a directory and often
logging its parent unnecessarily when our inode is not a directory.
The following test case for fstests triggers the problem:
seq=`basename $0`
seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
tmp=/tmp/$$
status=1 # failure is the default!
trap "_cleanup; exit \$status" 0 1 2 3 15
_cleanup()
{
_cleanup_flakey
rm -f $tmp.*
}
# get standard environment, filters and checks
. ./common/rc
. ./common/filter
. ./common/dmflakey
# real QA test starts here
_need_to_be_root
_supported_fs generic
_supported_os Linux
_require_scratch
_require_dm_flakey
_require_metadata_journaling $SCRATCH_DEV
# Create our test file with 2 hard links.
mkdir $SCRATCH_MNT/testdir
touch $SCRATCH_MNT/testdir/foo
ln $SCRATCH_MNT/testdir/foo $SCRATCH_MNT/testdir/bar
# Make sure everything done so far is durably persisted.
sync
# Now remove one of the links, trigger inode eviction and then fsync
# our inode.
unlink $SCRATCH_MNT/testdir/bar
echo 2 > /proc/sys/vm/drop_caches
$XFS_IO_PROG -c "fsync" $SCRATCH_MNT/testdir/foo
# Silently drop all writes on our scratch device to simulate a power failure.
_load_flakey_table $FLAKEY_DROP_WRITES
_unmount_flakey
# Allow writes again and mount the fs to trigger log/journal replay.
_load_flakey_table $FLAKEY_ALLOW_WRITES
_mount_flakey
# Now verify our directory entries.
echo "Entries in testdir:"
ls -1 $SCRATCH_MNT/testdir
# If we remove our inode, its parent should become empty and therefore we should
# be able to remove the parent.
rm -f $SCRATCH_MNT/testdir/*
rmdir $SCRATCH_MNT/testdir
_unmount_flakey
# The fstests framework will call fsck against our filesystem which will verify
# that all metadata is in a consistent state.
status=0
exit
The test failed on btrfs with:
generic/098 4s ... - output mismatch (see /home/fdmanana/git/hub/xfstests/results//generic/098.out.bad)
--- tests/generic/098.out 2015-07-23 18:01:12.616175932 +0100
+++ /home/fdmanana/git/hub/xfstests/results//generic/098.out.bad 2015-07-23 18:04:58.924138308 +0100
@@ -1,3 +1,6 @@
QA output created by 098
Entries in testdir:
+bar
foo
+rm: cannot remove '/home/fdmanana/btrfs-tests/scratch_1/testdir/foo': Stale file handle
+rmdir: failed to remove '/home/fdmanana/btrfs-tests/scratch_1/testdir': Directory not empty
...
(Run 'diff -u tests/generic/098.out /home/fdmanana/git/hub/xfstests/results//generic/098.out.bad' to see the entire diff)
_check_btrfs_filesystem: filesystem on /dev/sdc is inconsistent (see /home/fdmanana/git/hub/xfstests/results//generic/098.full)
$ cat /home/fdmanana/git/hub/xfstests/results//generic/098.full
(...)
checking fs roots
root 5 inode 258 errors 2001, no inode item, link count wrong
unresolved ref dir 257 index 0 namelen 3 name foo filetype 1 errors 6, no dir index, no inode ref
unresolved ref dir 257 index 3 namelen 3 name bar filetype 1 errors 5, no dir item, no inode ref
Checking filesystem on /dev/sdc
(...)
Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
Filipe Manana [Wed, 15 Jul 2015 22:26:43 +0000 (23:26 +0100)]
Btrfs: fix stale directory entries after fsync log replay
We have another case where after an fsync log replay we get an inode with
a wrong link count (smaller than it should be) and a number of directory
entries greater than its link count. This happens when we add a new link
hard link to our inode A and then we fsync some other inode B that has
the side effect of logging the parent directory inode too. In this case
at log replay time we add the new hard link to our inode (the item with
key BTRFS_INODE_REF_KEY) when processing the parent directory but we
never adjust the link count of our inode A. As a result we get stale dir
entries for our inode A that can never be deleted and therefore it makes
it impossible to remove the parent directory (as its i_size can never
decrease back to 0).
A simple reproducer for fstests that triggers this issue:
seq=`basename $0`
seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
tmp=/tmp/$$
status=1 # failure is the default!
trap "_cleanup; exit \$status" 0 1 2 3 15
_cleanup()
{
_cleanup_flakey
rm -f $tmp.*
}
# get standard environment, filters and checks
. ./common/rc
. ./common/filter
. ./common/dmflakey
# real QA test starts here
_need_to_be_root
_supported_fs generic
_supported_os Linux
_require_scratch
_require_dm_flakey
_require_metadata_journaling $SCRATCH_DEV
# Create our test directory and files.
mkdir $SCRATCH_MNT/testdir
touch $SCRATCH_MNT/testdir/foo
touch $SCRATCH_MNT/testdir/bar
# Make sure everything done so far is durably persisted.
sync
# Create one hard link for file foo and another one for file bar. After
# that fsync only the file bar.
ln $SCRATCH_MNT/testdir/bar $SCRATCH_MNT/testdir/bar_link
ln $SCRATCH_MNT/testdir/foo $SCRATCH_MNT/testdir/foo_link
$XFS_IO_PROG -c "fsync" $SCRATCH_MNT/testdir/bar
# Silently drop all writes on scratch device to simulate power failure.
_load_flakey_table $FLAKEY_DROP_WRITES
_unmount_flakey
# Allow writes again and mount the fs to trigger log/journal replay.
_load_flakey_table $FLAKEY_ALLOW_WRITES
_mount_flakey
# Now verify both our files have a link count of 2.
echo "Link count for file foo: $(stat --format=%h $SCRATCH_MNT/testdir/foo)"
echo "Link count for file bar: $(stat --format=%h $SCRATCH_MNT/testdir/bar)"
# We should be able to remove all the links of our files in testdir, and
# after that the parent directory should become empty and therefore
# possible to remove it.
rm -f $SCRATCH_MNT/testdir/*
rmdir $SCRATCH_MNT/testdir
_unmount_flakey
# The fstests framework will call fsck against our filesystem which will verify
# that all metadata is in a consistent state.
status=0
exit
The test fails with:
-Link count for file foo: 2
+Link count for file foo: 1
Link count for file bar: 2
+rm: cannot remove '/home/fdmanana/btrfs-tests/scratch_1/testdir/foo_link': Stale file handle
+rmdir: failed to remove '/home/fdmanana/btrfs-tests/scratch_1/testdir': Directory not empty
(...)
_check_btrfs_filesystem: filesystem on /dev/sdc is inconsistent
And fsck's output:
(...)
checking fs roots
root 5 inode 258 errors 2001, no inode item, link count wrong
unresolved ref dir 257 index 5 namelen 8 name foo_link filetype 1 errors 4, no inode ref
Checking filesystem on /dev/sdc
(...)
So fix this by marking inodes for link count fixup at log replay time
whenever a directory entry is replayed if the entry was created in the
transaction where the fsync was made and if it points to a non-directory
inode.
This isn't a new problem/regression, the issue exists for a long time,
possibly since the log tree feature was added (2008).
Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
Linus Torvalds [Mon, 3 Aug 2015 01:07:36 +0000 (18:07 -0700)]
Merge tag 'powerpc-4.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- TCE table memory calculation fix from Alexey
- Build fix for ans-lcd from Luis
- Unbalanced IRQ warning fix from Alistair
* tag 'powerpc-4.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/eeh-powernv: Fix unbalanced IRQ warning
macintosh/ans-lcd: fix build failure after module_init/exit relocation
powerpc/powernv/ioda2: Fix calculation for memory allocated for TCE table
i915: temporary fix for DP MST docking station NULL pointer dereference
Ted Ts'o reports that his Lenovo T540p ThinkPad crashes at boot if
attached to the docking station. This is a regression that he was able
to bisect to commit 8c7b5ccb7298: "drm/i915: Use atomic helpers for
computing changed flags:"
The reason seems to be the new call to drm_atomic_helper_check_modeset()
added to intel_modeset_compute_config(), which in turn calls
update_connector_routing(), and somehow ends up picking a NULL crtc for
the connector state, causing the subsequent drm_crtc_index() to OOPS.
Daniel Vetter says that the fundamental issue seems to be confusion in
the encoder selection, and this isn't the right fix, but while he chases
down the proper fix, this at least avoids the NULL pointer dereference
and makes Ted's docking station work again.
Reported-bisected-and-tested-by: Theodore Ts'o <tytso@mit.edu> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Mani Nikula <jani.nikula@linux.intel.com> Cc: Dave Airlie <airlied@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 2 Aug 2015 16:36:21 +0000 (09:36 -0700)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"A set of three fixes for the ipr driver and one fairly major one for
memory leaks in the mq path of SCSI"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: fix memory leak with scsi-mq
ipr: Fix invalid array indexing for HRRQ
ipr: Fix incorrect trace indexing
ipr: Fix locking for unit attention handling
Linus Torvalds [Sun, 2 Aug 2015 16:12:46 +0000 (09:12 -0700)]
Merge tag 'armsoc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"Things are calming down nicely here w.r.t. fixes. This batch
includes two week's worth since I missed to send before -rc4.
Nothing particularly scary to point out, smaller fixes here and there.
Shortlog describes it pretty well"
* tag 'armsoc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: dts: keystone: fix dt bindings to use post div register for mainpll
ARM: nomadik: disable UART0 on Nomadik boards
ARM: dts: i.MX35: Fix can support.
ARM: OMAP2+: hwmod: Fix _wait_target_ready() for hwmods without sysc
ARM: dts: add CPU OPP and regulator supply property for exynos4210
ARM: dts: Update video-phy node with syscon phandle for exynos3250
ARM: DRA7: hwmod: fix gpmc hwmod
Al Viro [Sat, 1 Aug 2015 23:59:28 +0000 (19:59 -0400)]
link_path_walk(): be careful when failing with ENOTDIR
In RCU mode we might end up with dentry evicted just we check
that it's a directory. In such case we should return ECHILD
rather than ENOTDIR, so that pathwalk would be retries in non-RCU
mode.
Breakage had been introduced in commit b18825a - prior to that
we were looking at nd->inode, which had been fetched before
verifying that ->d_seq was still valid. That form of check
would only be satisfied if at some point the pathname prefix
would indeed have resolved to a non-directory. The fix consists
of checking ->d_seq after we'd run into a non-directory dentry,
and failing with ECHILD in case of mismatch.
Note that all branches since 3.12 have that problem...
Linus Torvalds [Sat, 1 Aug 2015 19:47:04 +0000 (12:47 -0700)]
Merge tag 'dmaengine-fix-4.2-rc5' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine fixes from Vinod Koul:
"We had a regression due to reuse of descriptor so we have reverted
that.
The rest are driver fixes:
- at_hdmac and at_xdmac for residue, trannfer width, and channel config
- pl330 final fix for dma fails and overflow issue
- xgene resouce map fix
- mv_xor big endian op fix"
* tag 'dmaengine-fix-4.2-rc5' of git://git.infradead.org/users/vkoul/slave-dma:
Revert "dmaengine: virt-dma: don't always free descriptor upon completion"
dmaengine: mv_xor: fix big endian operation in register mode
dmaengine: xgene-dma: Fix the resource map to handle overlapping
dmaengine: at_xdmac: fix transfer data width in at_xdmac_prep_slave_sg()
dmaengine: at_hdmac: fix residue computation
dmaengine: at_xdmac: fix bug about channel configuration
dmaengine: pl330: Really fix choppy sound because of wrong residue calculation
dmaengine: pl330: Fix overflow when reporting residue in memcpy
Linus Torvalds [Sat, 1 Aug 2015 16:47:11 +0000 (09:47 -0700)]
Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixlets from Thomas Gleixner:
"Just two updates to the maintainers file"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
MAINTAINERS: Appoint Jiang and Marc as irqdomain maintainers
MAINTAINERS: Appoint Marc Zyngier as irqchips co-maintainer
Linus Torvalds [Sat, 1 Aug 2015 16:16:33 +0000 (09:16 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Fallout from the recent NMI fixes: make x86 LDT handling more robust.
Also some EFI fixes"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ldt: Make modify_ldt synchronous
x86/xen: Probe target addresses in set_aliased_prot() before the hypercall
x86/irq: Use the caller provided polarity setting in mp_check_pin_attr()
efi: Check for NULL efi kernel parameters
x86/efi: Use all 64 bit of efi_memmap in setup_e820()
1) Must teardown SR-IOV before unregistering netdev in igb driver, from
Alex Williamson.
2) Fix ipv6 route unreachable crash in IPVS, from Alex Gartrell.
3) Default route selection in ipv4 should take the prefix length, table
ID, and TOS into account, from Julian Anastasov.
4) sch_plug must have a reset method in order to purge all buffered
packets when the qdisc is reset, likewise for sch_choke, from WANG
Cong.
5) Fix deadlock and races in slave_changelink/br_setport in bridging.
From Nikolay Aleksandrov.
6) mlx4 bug fixes (wrong index in port even propagation to VFs,
overzealous BUG_ON assertion, etc.) from Ido Shamay, Jack
Morgenstein, and Or Gerlitz.
7) Turn off klog message about SCTP userspace interface compat that
makes no sense at all, from Daniel Borkmann.
8) Fix unbounded restarts of inet frag eviction process, causing NMI
watchdog soft lockup messages, from Florian Westphal.
9) Suspend/resume fixes for r8152 from Hayes Wang.
10) Fix busy loop when MSG_WAITALL|MSG_PEEK is used in TCP recv, from
Sabrina Dubroca.
11) Fix performance regression when removing a lot of routes from the
ipv4 routing tables, from Alexander Duyck.
12) Fix device leak in AF_PACKET, from Lars Westerhoff.
13) AF_PACKET also has a header length comparison bug due to signedness,
from Alexander Drozdov.
14) Fix bug in EBPF tail call generation on x86, from Daniel Borkmann.
15) Memory leaks, TSO stats, watchdog timeout and other fixes to
thunderx driver from Sunil Goutham and Thanneeru Srinivasulu.
16) act_bpf can leak memory when replacing programs, from Daniel
Borkmann.
17) WOL packet fixes in gianfar driver, from Claudiu Manoil.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (79 commits)
stmmac: fix missing MODULE_LICENSE in stmmac_platform
gianfar: Enable device wakeup when appropriate
gianfar: Fix suspend/resume for wol magic packet
gianfar: Fix warning when CONFIG_PM off
act_pedit: check binding before calling tcf_hash_release()
net: sk_clone_lock() should only do get_net() if the parent is not a kernel socket
net: sched: fix refcount imbalance in actions
r8152: reset device when tx timeout
r8152: add pre_reset and post_reset
qlcnic: Fix corruption while copying
act_bpf: fix memory leaks when replacing bpf programs
net: thunderx: Fix for crash while BGX teardown
net: thunderx: Add PCI driver shutdown routine
net: thunderx: Fix crash when changing rss with mutliple traffic flows
net: thunderx: Set watchdog timeout value
net: thunderx: Wakeup TXQ only if CQE_TX are processed
net: thunderx: Suppress alloc_pages() failure warnings
net: thunderx: Fix TSO packet statistic
net: thunderx: Fix memory leak when changing queue count
net: thunderx: Fix RQ_DROP miscalculation
...
Linus Torvalds [Sat, 1 Aug 2015 00:05:37 +0000 (17:05 -0700)]
Merge branch 'for-linus-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull btrfs fixes from Chris Mason:
"Filipe fixed up a hard to trigger ENOSPC regression from our merge
window pull, and we have a few other smaller fixes"
* 'for-linus-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: fix quick exhaustion of the system array in the superblock
btrfs: its btrfs_err() instead of btrfs_error()
btrfs: Avoid NULL pointer dereference of free_extent_buffer when read_tree_block() fail
btrfs: Fix lockdep warning of btrfs_run_delayed_iputs()
Linus Torvalds [Sat, 1 Aug 2015 00:00:25 +0000 (17:00 -0700)]
Merge tag 'sound-4.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"This became a relative big update as it includes the collected ASoC
fixes. There are a few fixes in ASoC core side, mostly for DAPM and
the new topology API. The rest are various ASoC driver-specific
fixes, as well as the usual HD-audio and USB-audio quirks"
* tag 'sound-4.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (29 commits)
ALSA: hda - Fix MacBook Pro 5,2 quirk
ALSA: hda - Fix race between PM ops and HDA init/probe
ALSA: usb-audio: add dB range mapping for some devices
ALSA: hda - Apply a fixup to Dell Vostro 5480
ALSA: hda - Add pin quirk for the headset mic jack detection on Dell laptop
ALSA: hda - Apply fixup for another Toshiba Satellite S50D
ALSA: fireworks: add support for AudioFire2 quirk
ALSA: hda - Fix the headset mic that will not work on Dell desktop machine
ALSA: hda - fix cs4210_spdif_automute()
ASoC: pcm1681: Fix setting de-emphasis sampling rate selection
ASoC: ssm4567: Keep TDM_BCLKS in ssm4567_set_dai_fmt
ASoC: sgtl5000: Fix up define for SGTL5000_SMALL_POP
ASoC: dapm: Don't add prefix to widget stream name
ASoC: rt5645: Check if codec is initialized in workqueue handler
ASoC: Intel: Get correct usage_count value to load firmware
ASoC: topology: Fix to add dapm mixer info
ASoC: zx: spdif: Fix devm_ioremap_resource return value check
ASoC: zx: i2s: Fix devm_ioremap_resource return value check
ASoC: mediatek: Use platform_of_node for machine drivers
ASoC: Free card DAPM context on snd_soc_instantiate_card() error path
...
Joachim Eastwood [Fri, 31 Jul 2015 17:13:22 +0000 (19:13 +0200)]
stmmac: fix missing MODULE_LICENSE in stmmac_platform
Commit 50649ab14982 ("stmmac: drop driver from stmmac platform code")
was a bit overzealous in removing code and dropped the MODULE_*
macro's that are still needed since stmmac_platform can be a module.
Fix this by putting the macro's remvoed in 50649ab14982 back.
This fixes the following errors when used as a module:
stmmac_platform: module license 'unspecified' taints kernel.
Disabling lock debugging due to kernel taint
stmmac_platform: Unknown symbol devm_kmalloc (err 0)
stmmac_platform: Unknown symbol stmmac_suspend (err 0)
stmmac_platform: Unknown symbol platform_get_irq_byname (err 0)
stmmac_platform: Unknown symbol stmmac_dvr_remove (err 0)
stmmac_platform: Unknown symbol platform_get_resource (err 0)
stmmac_platform: Unknown symbol of_get_phy_mode (err 0)
stmmac_platform: Unknown symbol of_property_read_u32_array (err 0)
stmmac_platform: Unknown symbol of_alias_get_id (err 0)
stmmac_platform: Unknown symbol stmmac_resume (err 0)
stmmac_platform: Unknown symbol stmmac_dvr_probe (err 0)
Fixes: 50649ab14982 ("stmmac: drop driver from stmmac platform code") Reported-by: Igor Gnatenko <i.gnatenko.brain@gmail.com> Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 31 Jul 2015 22:41:50 +0000 (15:41 -0700)]
Merge branch 'gianfar-wol-fixes'
Claudiu Manoil says:
====================
gianfar: wol magic packet fixes
These changes were already validated as part of FSL SDK.
Patch 2 fixes occasional wake-on magic packet failures during
traffic, probably due to incorrect traffic stop/ device halt
sequence and incorrect usage of txlock.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The wol_en flag is 0 by default anyway, and we have the
following inconsistency: a MAGIC packet wol capable eth
interface is registered as a wake-up source but unable
to wake-up the system as wol_en is 0 (wake-on flag set to 'd').
Calling set_wakeup_enable() at netdev open is just redundant
because wol_en is 0 by default.
Let only ethtool call set_wakeup_enable() for now.
The bflock is obviously obsoleted, its utility has been corroded
over time. The bitfield flags used today in gianfar are accessed
only on the init/ config path, with no real possibility of
concurrency - nothing that would justify smth. like bflock.
Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
If we disable NAPI in the first place we can mask the device's
interrupts (and halt it) without fearing that imask may be
concurrently accessed from interrupt context, so there's
no need to do local_irq_save() around gfar_halt_nodisable().
lock_rx_qs()/unlock_tx_qs() are just obsoleted and potentially
buggy routines. The txlock is currently used in the driver only
to manage TX congestion, it has nothing to do with halting the
device. With these changes, the TX processing is stopped before
gfar_halt().
Compact gfar_halt() is used instead of gfar_halt_nodisable(),
as it disables Rx/TX DMA h/w blocks and the Rx/TX h/w queues.
gfar_start() re-enables all these blocks on resume. Enabling
the magic-packet mode remains the same, note that the RX block
is re-enabled just before entering sleep mode.
Add IRQF_NO_SUSPEND flag for the error interrupt line, to signal
that the interrupt line must remain active during sleep in order
to wake the system by magic packet (MAG) reception interrupt.
(On some systems the MAG interrupt did trigger w/o this flag
as well, but on others it didn't.)
Without these fixes, when suspended during fair Tx traffic the
interface occasionally failed to be woken up by magic packet.
Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
CC drivers/net/ethernet/freescale/gianfar.o
drivers/net/ethernet/freescale/gianfar.c:568:13: warning: 'lock_tx_qs'
defined but not used [-Wunused-function]
static void lock_tx_qs(struct gfar_private *priv)
^
drivers/net/ethernet/freescale/gianfar.c:576:13: warning: 'unlock_tx_qs'
defined but not used [-Wunused-function]
static void unlock_tx_qs(struct gfar_private *priv)
^
Reported-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
WANG Cong [Fri, 31 Jul 2015 00:12:21 +0000 (17:12 -0700)]
act_pedit: check binding before calling tcf_hash_release()
When we share an action within a filter, the bind refcnt
should increase, therefore we should not call tcf_hash_release().
Fixes: 1a29321ed045 ("net_sched: act: Dont increment refcnt on replace") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Cong Wang <cwang@twopensource.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Murali Karicheri [Fri, 29 May 2015 16:04:13 +0000 (12:04 -0400)]
ARM: dts: keystone: fix dt bindings to use post div register for mainpll
All of the keystone devices have a separate register to hold post
divider value for main pll clock. Currently the fixed-postdiv
value used for k2hk/l/e SoCs works by sheer luck as u-boot happens to
use a value of 2 for this. Now that we have fixed this in the pll
clock driver change the dt bindings for the same.
Merge tag 'iommu-fixes-v4.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU fixes from Joerg Roedel:
"These fixes are all for the AMD IOMMU driver:
- A regression with HSA caused by the conversion of the driver to
default domains. The fixes make sure that an HSA device can still
be attached to an IOMMUv2 domain and that these domains also allow
non-IOMMUv2 capable devices.
- Fix iommu=pt mode which did not work because the dma_ops where set
to nommu_ops, which breaks devices that can only do 32bit DMA.
- Fix an issue with non-PCI devices not working, because there are no
dma_ops for them. This issue was discovered recently as new AMD
x86 platforms have non-PCI devices too"
* tag 'iommu-fixes-v4.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/amd: Allow non-ATS devices in IOMMUv2 domains
iommu/amd: Set global dma_ops if swiotlb is disabled
iommu/amd: Use swiotlb in passthrough mode
iommu/amd: Allow non-IOMMUv2 devices in IOMMUv2 domains
iommu/amd: Use iommu core for passthrough mode
iommu/amd: Use iommu_attach_group()
Merge tag 'drm-intel-fixes-2015-07-31' of git://anongit.freedesktop.org/drm-intel
Pull drm intel fixes from Daniel Vetter:
"I delayed my -fixes pull a bit hoping that I could include a fix for
the dp mst stuff but looks a bit more nasty than that. So just 3
other regression fixes, one 4.2 other two cc: stable"
* tag 'drm-intel-fixes-2015-07-31' of git://anongit.freedesktop.org/drm-intel:
drm/i915: Declare the swizzling unknown for L-shaped configurations
drm/i915: Mark PIN_USER binding as GLOBAL_BIND without the aliasing ppgtt
drm/i915: Replace WARN inside I915_READ64_2x32 with retry loop
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"This has a bunch of nouveau fixes, as Ben has been hibernating and has
lots of small fixes for lots of bugs across nouveau.
Radeon has one major fix for hdmi/dp audio regression that is larger
than Alex would like, but seems to fix up a fair few bugs, along with
some misc fixes.
And a few msm fixes, one of which is also a bit large.
But nothing in here seems insane or crazy for this stage, just more
than I'd like"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (33 commits)
drm/msm/mdp5: release SMB (shared memory blocks) in various cases
drm/msm: change to uninterruptible wait in atomic commit
drm/msm: mdp4: Fix drm_framebuffer dereference crash
drm/msm: fix msm_gem_prime_get_sg_table()
drm/amdgpu: add new parameter to seperate map and unmap
drm/amdgpu: hdp_flush is not needed for inside IB
drm/amdgpu: different emit_ib for gfx and compute
drm/amdgpu: information leak in amdgpu_info_ioctl()
drm/amdgpu: clean up init sequence for failures
drm/radeon/combios: add some validation of lvds values
drm/radeon: rework audio modeset to handle non-audio hdmi features
drm/radeon: rework audio detect (v4)
drm/amdgpu: Drop drm/ prefix for including drm.h in amdgpu_drm.h
drm/radeon: Drop drm/ prefix for including drm.h in radeon_drm.h
drm/nouveau/nouveau/ttm: fix tiled system memory with Maxwell
drm/nouveau/kms/nv50-: guard against enabling cursor on disabled heads
drm/nouveau/fbcon/g80: reduce PUSH_SPACE alloc, fire ring on accel init
drm/nouveau/fbcon/gf100-: reduce RING_SPACE allocation
drm/nouveau/fbcon/nv11-: correctly account for ring space usage
drm/nouveau/bios: add proper support for opcode 0x59
...
Jun Nie [Fri, 10 Jul 2015 12:02:49 +0000 (20:02 +0800)]
Revert "dmaengine: virt-dma: don't always free descriptor upon completion"
This reverts commit b9855f03d560d351e95301b9de0bc3cad3b31fe9.
The patch break existing DMA usage case. For example, audio SOC
dmaengine never release channel and cause virt-dma to cache too
much memory in descriptor to exhaust system memory.
dmaengine: mv_xor: fix big endian operation in register mode
Commit 6f166312c6ea2 ("dmaengine: mv_xor: add support for a38x command
in descriptor mode") introduced the support for a feature that
appeared in Armada 38x: specifying the operation to be performed in a
per-descriptor basis rather than globally per channel.
However, when doing so, it changed the function mv_chan_set_mode() to
use:
if (IS_ENABLED(__BIG_ENDIAN))
instead of:
#if defined(__BIG_ENDIAN)
While IS_ENABLED() is perfectly fine for CONFIG_* symbols, it is not
for other symbols such as __BIG_ENDIAN that is provided directly by
the compiler. Consequently, the commit broke support for big-endian,
as the XOR_DESCRIPTOR_SWAP flag was not set in the XOR channel
configuration register.
The primarily visible effect was some nasty warnings and failures
appearing during the self-test of the XOR unit:
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Fixes: 6f166312c6ea2 ("dmaengine: mv_xor: add support for a38x command in descriptor mode") Reviewed-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
dmaengine: xgene-dma: Fix the resource map to handle overlapping
There is an overlap in dma ring cmd csr region due to sharing of ethernet
ring cmd csr region. This patch fix the resource overlapping by mapping
the entire dma ring cmd csr region.
Cyrille Pitchen [Tue, 30 Jun 2015 12:36:57 +0000 (14:36 +0200)]
dmaengine: at_xdmac: fix transfer data width in at_xdmac_prep_slave_sg()
This patch adds the missing update of the transfer data width in
at_xdmac_prep_slave_sg().
Indeed, for each item in the scatter-gather list, we check whether the
transfer length is aligned with the data width provided by
dmaengine_slave_config(). If so, we directly use this data width for the
current part of the transfer we are preparing. Otherwise, the data width
is reduced to 8 bits (1 byte). Of course, the actual number of register
accesses must also be updated to match the new data width.
So one chunk was missing in the original patch (see Fixes tag below): the
number of register accesses was correctly set to (len >> fixed_dwidth) in
mbr_ubc but the real data width was not updated in mbr_cfg. Since mbr_cfg
may change for each part of the scatter-gather transfer this also explains
why the original patch used the Descriptor View 2 instead of the
Descriptor View 1.
Let's take the example of a DMA transfer to write 8bit data into an Atmel
USART with FIFOs. When FIFOs are enabled in the USART, its Transmit
Holding Register (THR) works in multidata mode, that is to say that up to
4 8bit data can be written into the THR in a single 32bit access and it is
still possible to write only one data with a 8bit access. To take
advantage of this new feature, the DMA driver was modified to allow
multiple dwidths when doing slave transfers.
For instance, when the total length is 22 bytes, the USART driver splits
the transfer into 2 parts:
First part: 20 bytes transferred through 5 32bit writes into THR
Second part: 2 bytes transferred though 2 8bit writes into THR
For the second part, the data width was first set to 4_BYTES by the USART
driver thanks to dmaengine_slave_config() then at_xdmac_prep_slave_sg()
reduces this data width to 1_BYTE because the 2 byte length is not aligned
with the original 4_BYTES data width. Since the data width is modified,
the actual number of writes into THR must be set accordingly.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Fixes: 6d3a7d9e3ada ("dmaengine: at_xdmac: allow muliple dwidths when doing slave transfers") Cc: stable@vger.kernel.org #4.0 and later Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Cyrille Pitchen [Thu, 18 Jun 2015 11:25:41 +0000 (13:25 +0200)]
dmaengine: at_hdmac: fix residue computation
As claimed by the programmer datasheet and confirmed by the IP designer,
the Block Transfer Size (BTSIZE) bitfield of the Channel x Control A
Register (CTRLAx) always refers to a number of Source Width (SRC_WIDTH)
transfers.
Both the SRC_WIDTH and BTSIZE bitfields can be extacted from the CTRLAx
register to compute the DMA residue. So the 'tx_width' field is useless
and can be removed from the struct at_desc.
Before this patch, atc_prep_slave_sg() was not consistent: BTSIZE was
correctly initialized according to the SRC_WIDTH but 'tx_width' was always
set to reg_width, which was incorrect for MEM_TO_DEV transfers. It led to
bad DMA residue when 'tx_width' != SRC_WIDTH.
Also the 'tx_width' field was mostly set only in the first and last
descriptors. Depending on the kind of DMA transfer, this field remained
uninitialized for intermediate descriptors. The accurate DMA residue was
computed only when the currently processed descriptor was the first or the
last of the chain. This algorithm was a little bit odd. An accurate DMA
residue can always be computed using the SRC_WIDTH and BTSIZE bitfields
in the CTRLAx register.
Finally, the test to check whether the currently processed descriptor is
the last of the chain was wrong: for cyclic transfer, last_desc->lli.dscr
is NOT equal to zero, since set_desc_eol() is never called, but logically
equal to first_desc->txd.phys. This bug has a side effect on the
drivers/tty/serial/atmel_serial.c driver, which uses cyclic DMA transfer
to receive data. Since the DMA residue was wrong each time the DMA
transfer reaches the second (and last) period of the transfer, no more
data were received by the USART driver till the cyclic DMA transfer loops
back to the first period.
dmaengine: at_xdmac: fix bug about channel configuration
When using descriptor view 2 or higher, we don't write the configuration
into AT_XDMAC_CC register because this configuration will be fetch from
the descriptor. Unfortunately, the PROT bit is not updated with this
method, we have to do it manually before enabling the channel.
iommu/amd: Allow non-ATS devices in IOMMUv2 domains
With the grouping of multi-function devices a non-ATS
capable device might also end up in the same domain as an
IOMMUv2 capable device.
So handle this situation gracefully and don't consider it a
bug anymore.
Andy Lutomirski [Thu, 30 Jul 2015 21:31:32 +0000 (14:31 -0700)]
x86/ldt: Make modify_ldt synchronous
modify_ldt() has questionable locking and does not synchronize
threads. Improve it: redesign the locking and synchronize all
threads' LDTs using an IPI on all modifications.
This will dramatically slow down modify_ldt in multithreaded
programs, but there shouldn't be any multithreaded programs that
care about modify_ldt's performance in the first place.
This fixes some fallout from the CVE-2015-5157 fixes.
Signed-off-by: Andy Lutomirski <luto@kernel.org> Reviewed-by: Borislav Petkov <bp@suse.de> Cc: Andrew Cooper <andrew.cooper3@citrix.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jan Beulich <jbeulich@suse.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: security@kernel.org <security@kernel.org> Cc: <stable@vger.kernel.org> Cc: xen-devel <xen-devel@lists.xen.org> Link: http://lkml.kernel.org/r/4c6978476782160600471bd865b318db34c7b628.1438291540.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
Andy Lutomirski [Thu, 30 Jul 2015 21:31:31 +0000 (14:31 -0700)]
x86/xen: Probe target addresses in set_aliased_prot() before the hypercall
The update_va_mapping hypercall can fail if the VA isn't present
in the guest's page tables. Under certain loads, this can
result in an OOPS when the target address is in unpopulated vmap
space.
While we're at it, add comments to help explain what's going on.
This isn't a great long-term fix. This code should probably be
changed to use something like set_memory_ro.
Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Andrew Cooper <andrew.cooper3@citrix.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: David Vrabel <dvrabel@cantab.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jan Beulich <jbeulich@suse.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: security@kernel.org <security@kernel.org> Cc: <stable@vger.kernel.org> Cc: xen-devel <xen-devel@lists.xen.org> Link: http://lkml.kernel.org/r/0b0e55b995cda11e7829f140b833ef932fcabe3a.1438291540.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
Merge tag 'efi-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/mfleming/efi into x86/urgent
Pull EFI fixes from Matt Fleming:
* Fix an EFI boot issue preventing a Parallels virtual machine from
booting because the upper 32-bits of the EFI memmap pointer were
being discarded in setup_e820(). (Dmitry Skorodumov)
* Validate that the "efi" kernel parameter gets used with an argument,
otherwise we will oops. (Ricardo Neri)
Merge tag 'xfs-for-linus-4.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs
Pull xfs fixes from Dave Chinner:
"There are a couple of recently found, long standing remote attribute
corruption fixes caused by log recovery getting confused after a
crash, and the new DAX code in XFS (merged in 4.2-rc1) needs to
actually use the DAX fault path on read faults.
Summary:
- remote attribute log recovery corruption fixes
- DAX page faults need to use direct mappings, not a page cache
mapping"
* tag 'xfs-for-linus-4.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs:
xfs: remote attributes need to be considered data
xfs: remote attribute headers contain an invalid LSN
xfs: call dax_fault on read page faults for DAX
net: sk_clone_lock() should only do get_net() if the parent is not a kernel socket
The newsk returned by sk_clone_lock should hold a get_net()
reference if, and only if, the parent is not a kernel socket
(making this similar to sk_alloc()).
E.g,. for the SYN_RECV path, tcp_v4_syn_recv_sock->..inet_csk_clone_lock
sets up the syn_recv newsk from sk_clone_lock. When the parent (listen)
socket is a kernel socket (defined in sk_alloc() as having
sk_net_refcnt == 0), then the newsk should also have a 0 sk_net_refcnt
and should not hold a get_net() reference.
Fixes: 26abe14379f8 ("net: Modify sk_alloc to not reference count the
netns of kernel sockets.") Acked-by: Eric Dumazet <edumazet@google.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Wed, 29 Jul 2015 21:35:25 +0000 (23:35 +0200)]
net: sched: fix refcount imbalance in actions
Since commit 55334a5db5cd ("net_sched: act: refuse to remove bound action
outside"), we end up with a wrong reference count for a tc action.
Test case 1:
FOO="1,6 0 0 4294967295,"
BAR="1,6 0 0 4294967294,"
tc filter add dev foo parent 1: bpf bytecode "$FOO" flowid 1:1 \
action bpf bytecode "$FOO"
tc actions show action bpf
action order 0: bpf bytecode '1,6 0 0 4294967295' default-action pipe
index 1 ref 1 bind 1
tc actions replace action bpf bytecode "$BAR" index 1
tc actions show action bpf
action order 0: bpf bytecode '1,6 0 0 4294967294' default-action pipe
index 1 ref 2 bind 1
tc actions replace action bpf bytecode "$FOO" index 1
tc actions show action bpf
action order 0: bpf bytecode '1,6 0 0 4294967295' default-action pipe
index 1 ref 3 bind 1
Test case 2:
FOO="1,6 0 0 4294967295,"
tc filter add dev foo parent 1: bpf bytecode "$FOO" flowid 1:1 action ok
tc actions show action gact
action order 0: gact action pass
random type none pass val 0
index 1 ref 1 bind 1
tc actions add action drop index 1
RTNETLINK answers: File exists [...]
tc actions show action gact
action order 0: gact action pass
random type none pass val 0
index 1 ref 2 bind 1
tc actions add action drop index 1
RTNETLINK answers: File exists [...]
tc actions show action gact
action order 0: gact action pass
random type none pass val 0
index 1 ref 3 bind 1
What happens is that in tcf_hash_check(), we check tcf_common for a given
index and increase tcfc_refcnt and conditionally tcfc_bindcnt when we've
found an existing action. Now there are the following cases:
1) We do a late binding of an action. In that case, we leave the
tcfc_refcnt/tcfc_bindcnt increased and are done with the ->init()
handler. This is correctly handeled.
2) We replace the given action, or we try to add one without replacing
and find out that the action at a specific index already exists
(thus, we go out with error in that case).
In case of 2), we have to undo the reference count increase from
tcf_hash_check() in the tcf_hash_check() function. Currently, we fail to
do so because of the 'tcfc_bindcnt > 0' check which bails out early with
an -EPERM error.
Now, while commit 55334a5db5cd prevents 'tc actions del action ...' on an
already classifier-bound action to drop the reference count (which could
then become negative, wrap around etc), this restriction only accounts for
invocations outside a specific action's ->init() handler.
One possible solution would be to add a flag thus we possibly trigger
the -EPERM ony in situations where it is indeed relevant.
After the patch, above test cases have correct reference count again.
Fixes: 55334a5db5cd ("net_sched: act: refuse to remove bound action outside") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Cong Wang <cwang@twopensource.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 30 Jul 2015 21:03:46 +0000 (14:03 -0700)]
Merge branch 'r8152-fixes'
Hayes Wang says:
====================
r8152: device reset
v3:
For patch #2, remove cancel_delayed_work().
v2:
For patch #1, remove usb_autopm_get_interface(), usb_autopm_put_interface(), and
the checking of intf->condition.
For patch #2, replace the original method with usb_queue_reset_device() to reset
the device.
v1:
Although the driver works normally, we find the device may get all 0xff data when
transmitting packets on certain platforms. It would break the device and no packet
could be transmitted. The reset is necessary to recover the hw for this situation.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add rtl8152_pre_reset() and rtl8152_post_reset() which are used when
calling usb_reset_device(). The two functions could reduce the time
of reset when calling usb_reset_device() after probe().
Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
MacBook Pro 5,2 with ALC889 codec had already a fixup entry, but this
seems not working correctly, a fix for pin NID 0x15 is needed in
addition. It's equivalent with the fixup for MacBook Air 1,1, so use
this instead.
Thomas Gleixner [Thu, 30 Jul 2015 10:40:55 +0000 (12:40 +0200)]
MAINTAINERS: Appoint Jiang and Marc as irqdomain maintainers
Ben was pretty surprised that he is still listed as the maintainer and
he has no objections against transferring the duty to those who
rumaged in and revamped that code in the recent past.
Add kernel/irq/msi.c to the affected files as it's part of the shiny
new hierarchical irqdomain machinery.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Grant Likely <grant.likely@linaro.org>
Jiang Liu [Thu, 30 Jul 2015 07:51:32 +0000 (15:51 +0800)]
x86/irq: Use the caller provided polarity setting in mp_check_pin_attr()
Commit d32932d02e18 ("x86/irq: Convert IOAPIC to use hierarchical
irqdomain interfaces") introduced a regression which causes
malfunction of interrupt lines.
The reason is that the conversion of mp_check_pin_attr() missed to
update the polarity selection of the interrupt pin with the caller
provided setting and instead uses a stale attribute value. That in
turn results in chosing the wrong interrupt flow handler.
Use the caller supplied setting to configure the pin correctly which
also choses the correct interrupt flow handler.
This restores the original behaviour and on the affected
machine/driver (Surface Pro 3, i2c controller) all IOAPIC IRQ
configuration are identical to v4.1.
Fixes: d32932d02e18 ("x86/irq: Convert IOAPIC to use hierarchical irqdomain interfaces") Reported-and-tested-by: Matt Fleming <matt@codeblueprint.co.uk> Reported-and-tested-by: Chen Yu <yu.c.chen@intel.com> Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Chen Yu <yu.c.chen@intel.com> Cc: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1438242695-23531-1-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
"The main change is support for keyboards and touchpads found in 2015
editions of Macbooks"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Revert "Input: zforce - don't overwrite the stack"
Input: bcm5974 - add support for the 2015 Macbook Pro
HID: apple: Add support for the 2015 Macbook Pro
Input: bcm5974 - prepare for a new trackpad generation
Input: synaptics - dump ext10 capabilities as well
Tony Battersby [Thu, 16 Jul 2015 15:40:41 +0000 (11:40 -0400)]
scsi: fix memory leak with scsi-mq
Fix a memory leak with scsi-mq triggered by commands with large data
transfer length.
__sg_alloc_table() sets both table->nents and table->orig_nents to the
same value. When the scatterlist is DMA-mapped, table->nents is
overwritten with the (possibly smaller) size of the DMA-mapped
scatterlist, while table->orig_nents retains the original size of the
allocated scatterlist. scsi_free_sgtable() should therefore check
orig_nents instead of nents, and all code that initializes sdb->table
without calling __sg_alloc_table() should set both nents and orig_nents.
Fixes: d285203cf647 ("scsi: add support for a blk-mq based I/O path.") Cc: <stable@vger.kernel.org> # 3.17+ Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
Brian King [Tue, 14 Jul 2015 16:41:33 +0000 (11:41 -0500)]
ipr: Fix invalid array indexing for HRRQ
Fixes another signed / unsigned array indexing bug in the ipr driver.
Currently, when hrrq_index wraps, it becomes a negative number. We
do the modulo, but still have a negative number, so we end up indexing
backwards in the array. Given where the hrrq array is located in memory,
we probably won't actually reference memory we don't own, but nonetheless
ipr is still looking at data within struct ipr_ioa_cfg and interpreting it as
struct ipr_hrr_queue data, so bad things could certainly happen.
Each ipr adapter has anywhere from 1 to 16 HRRQs. By default, we use 2 on new
adapters. Let's take an example:
Assume ioa_cfg->hrrq_index=0x7fffffffe and ioa_cfg->hrrq_num=4:
The atomic_add_return will then return -1. We mod this with 3 and get -2, add
one and get -1 for an array index.
On adapters which support more than a single HRRQ, we dedicate HRRQ to adapter
initialization and error interrupts so that we can optimize the other queues
for fast path I/O. So all normal I/O uses HRRQ 1-15. So we want to spread the
I/O requests across those HRRQs.
With the default module parameter settings, this bug won't hit, only when
someone sets the ipr.number_of_msix parameter to a value larger than 3 is when
bad things start to happen.
Cc: <stable@vger.kernel.org> Tested-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Reviewed-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Reviewed-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com> Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
Brian King [Tue, 14 Jul 2015 16:41:31 +0000 (11:41 -0500)]
ipr: Fix incorrect trace indexing
When ipr's internal driver trace was changed to an atomic, a signed/unsigned
bug slipped in which results in us indexing backwards in our memory buffer
writing on memory that does not belong to us. This patch fixes this by removing
the modulo and instead just mask off the low bits.
Cc: <stable@vger.kernel.org> Tested-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Reviewed-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Reviewed-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com> Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
Brian King [Tue, 14 Jul 2015 16:41:29 +0000 (11:41 -0500)]
ipr: Fix locking for unit attention handling
Make sure we have the host lock held when calling scsi_report_bus_reset. Fixes
a crash seen as the __devices list in the scsi host was changing as we were
iterating through it.
Cc: <stable@vger.kernel.org> Reviewed-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Reviewed-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com> Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
Even though it is documented how to specifiy efi parameters, it is
possible to cause a kernel panic due to a dereference of a NULL pointer when
parsing such parameters if "efi" alone is given:
This panic is not reproducible with "efi=" as this will result in a non-NULL
zero-length string.
Thus, verify that the pointer to the parameter string is not NULL. This is
consistent with other parameter-parsing functions which check for NULL pointers.
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Merge tag 'hwmon-for-linus-v4.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
"Two patches headed for -stable.
nct7802: Fix integer overflow seen when writing voltage limits
nct7904: Rename pwm attributes to match hwmon ABI"
* tag 'hwmon-for-linus-v4.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (nct7802) Fix integer overflow seen when writing voltage limits
hwmon: (nct7904) Rename pwm attributes to match hwmon ABI
Chris Wilson [Sun, 28 Jun 2015 08:19:26 +0000 (09:19 +0100)]
drm/i915: Declare the swizzling unknown for L-shaped configurations
The old style of memory interleaving swizzled upto the end of the
first even bank of memory, and then used the remainder as unswizzled on
the unpaired bank - i.e. swizzling is not constant for all memory. This
causes problems when we try to migrate memory and so the kernel prevents
migration at all when we detect L-shaped inconsistent swizzling.
However, this issue also extends to userspace who try to manually detile
into memory as the swizzling for an individual page is unknown (it
depends on its physical address only known to the kernel), userspace
cannot correctly swizzle.
Note that this is a new attempt for the previously merged one,
reverted in
Revert "drm/i915: Declare the swizzling unknown for L-shaped configurations"
This is cc: stable since we need it to fix up troubles with wc cpu
mmaps that userspace recently started to use widely.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91105 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org
[danvet: Add note about previous (failed attempt).] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Wed, 29 Jul 2015 19:02:48 +0000 (20:02 +0100)]
drm/i915: Mark PIN_USER binding as GLOBAL_BIND without the aliasing ppgtt
If the device does not support the aliasing ppgtt, we must translate
user bind requests (PIN_USER) from LOCAL_BIND to a GLOBAL_BIND. However,
since this is device specific we cannot do this conveniently in the
upper layers and so must manage the vma->bound flags in the backend.
Partial revert of commit 75d04a3773ecee617847de963ae4195d6aa74c28 [4.2-rc1]
Author: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Date: Tue Apr 28 17:56:17 2015 +0300
drm/i915/gtt: Allocate va range only if vma is not bound
Note this was spotted by Daniel originally, but we dropped the ball in
getting the fix in before the bug going wild. Sorry all.
Reported-by: Vincent Legoll vincent.legoll@gmail.com
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91133
References: https://bugs.freedesktop.org/show_bug.cgi?id=90224 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michel Thierry <michel.thierry@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
projects / linux-beck.git / log