navin patidar [Sun, 1 Jun 2014 12:16:28 +0000 (17:46 +0530)]
staging :rtl8188eu: Remove HalPhyRf.[h|c] files.
Move ODM_GetRightChnlPlaceforIQK() from HalPhyRf.c to HalPhyRf_8188e.c.
Move ODM_TARGET_CHNL_NUM_2G_5G from HalPhyRf.h to HalPhyRf_8188e.h.
After the movement of function and macro HalPhyRf.[h|c] files are redundant.
navin patidar [Thu, 29 May 2014 17:50:47 +0000 (23:20 +0530)]
staging: rtl8188eu: Remove function rtw_hal_sreset_xmit_status_check()
rtw_hal_sreset_xmit_status_check() is a wrapper to call
rtl8188e_sreset_xmit_status_check(), which calls
rtl8188e_silentreset_for_specific_platform() in case of transmission has
stopped to do a silent reset and restore the transmission but
rtl8188e_silentreset_for_specific_platform() has empty defination,
so we can remove rtw_hal_sreset_xmit_status_check() because it doesn't
serve its purpose.
navin patidar [Thu, 29 May 2014 17:50:43 +0000 (23:20 +0530)]
staging: rtl8188eu: Use rtw_hal_sreset_init() in rtw_reset_drv_sw()
We can replace rtw_hal_sreset_reset_value() with rtw_hal_sreset_init() because
both function call sreset_reset_value() and sreset_init_value() respectively at
the end of code path, and function defination of sreset_reset_value() and
sreset_init_value() is identical.
David Daney [Thu, 29 May 2014 10:10:02 +0000 (11:10 +0100)]
staging: octeon-ethernet: Move PHY activation to .ndo_open().
This prevents PHY not found types of errors for PHY drivers that are
probed after the Ethernet driver is probed, because the ifconfig UP is
done from userspace after all drivers have been probed.
Also avoid the cvmx-helper-board.c PHY code if a real PHY driver is
present, this allows a bootloader supplied device tree to specify the
PHY information rather than having to modify the code for each
different board.
Tested-by: Alex Smith <alex.smith@imgtec.com> Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Alex Smith <alex.smith@imgtec.com> Cc: devel@driverdev.osuosl.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daeseok Youn [Tue, 3 Jun 2014 06:28:42 +0000 (15:28 +0900)]
staging: dgap: rename dgap_tty_uninit() to dgap_cleanup_tty()
- dgap_tty_uninit() doesn't match dgap_tty_init() at all.
so rename it. It is just used for cleanup when this module is
exited or failed to initialize by dgap_init_module.
Daeseok Youn [Mon, 2 Jun 2014 05:06:53 +0000 (14:06 +0900)]
staging: dgap: remove bogus null test in dgap_tty_init()
- The channels array were set to NULL in dgap_found_board().
- Removes redundant null check for channels array in for loop,
if one of the channel cannot be allocated, dgap_tty_init() just returns
an error.
Daeseok Youn [Thu, 29 May 2014 09:11:09 +0000 (18:11 +0900)]
staging: dgap: unwind on error in dgap_found_board()
Adds a label for "kfree(brd)". And also remove
a state value as BOARD_FAILED in brd when dgap_do_remap() is failed.
Because "brd" will free after failure.
Paul Bolle [Fri, 30 May 2014 12:52:18 +0000 (14:52 +0200)]
staging: rtl8192u: remove checks for CONFIG_IEEE80211_CRYPT_TKIP
Ever since rtl8192u was added as a staging driver in v2.6.33 it contained
checks for CONFIG_IEEE80211_CRYPT_TKIP. But the Kconfig symbol
IEEE80211_CRYPT_TKIP was renamed to LIB80211_CRYPT_TKIP in v2.6.29. So
these checks have always evaluated to false. And these checks were rather
odd to begin with, since rtl8192u comes with its own ieee80211 stack,
which has support for TKIP built in.
Now the safe and easy thing to do here would be to remove these checks
and the code they hide. But it turns out that with some minor cleanup
the code currently hidden behind these checks builds cleanly. And by
building it we allow the people actually running this code to test
whether it is any good.
That minor cleanup is needed because ieee80211_encrypt_fragment()
accesses struct sk_buff's data member as if it is a struct
ieee80211_hdr. It's not. See, in ieee80211_xmit() a struct
ieee80211_hdr_3addrqos is skb_put() into the sk_buff with which
ieee80211_encrypt_fragment() will be called. So switch from
ieee80211_hdr to ieee80211_hdr_3addrqos here.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Magnus Damm [Fri, 6 Jun 2014 10:44:52 +0000 (19:44 +0900)]
staging: board: kzm9d: Board staging support for emxx_udc
Add staging board support for the KZM9D board and add
an emxx_udc platform device to allow in-tree continous
development of the driver on the KZM9D board.
When DT bindings are ready for the emxx_udc driver then
the platform device in the KZM9D staging board code can
easily be removed. Until then we use platform devices
to continously improve the driver and integration code.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Magnus Damm [Fri, 6 Jun 2014 10:44:43 +0000 (19:44 +0900)]
staging: board: Initial board staging support
Add staging board base support to allow continuous upstream
in-tree development and integration of platform devices.
Helps developers integrate devices as platform devices for
device drivers that only provide platform device bindings.
This in turn allows for incremental development of both
hardware feature support and DT binding work in parallel.
Two separate pieces of board staging functionality is
provided to ease per-board staging board support:
- The board_staging() macro allows easy per-board callbacks
- The board_staging_dt_node_available() provides DT node checking
Tested on the KZM9D board with the emxx_udc staging driver.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Magnus Damm [Fri, 6 Jun 2014 10:44:26 +0000 (19:44 +0900)]
staging: emxx_udc: I/O memory and IRQ resource support
Adjust the emxx_udc driver to make use of the standard
driver model to pass I/O memory and IRQ as resources
instead of hard coding those things in the driver.
Needs more work - the VBUS signal is yet not handled.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Magnus Damm [Fri, 6 Jun 2014 10:44:17 +0000 (19:44 +0900)]
staging: emxx_udc: Add Emma Mobile USB Gadget driver
Add the emxx_udc driver to staging based on an old linux-2.6.35.7
android tree. The driver has been brushed up slightly to complile
but it is still in great need of cleanup.
At this point DT bindings are clearly lacking and I doubt that the
driver even can run with multiple instances (global variables, hurray!).
Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: ni_stc.h: remove stc read/write callbacks from ni_private
The drivers that include ni_mio_common.c set the stc register read/write
callbacks to private functions that handle the read/write operations in
the correct manner for the hardware.
The ni_atmio and ni_mio_cs drivers use identical code to handle the
operations.
The ni_pcimio driver is a bit different due to the non-windowed setup
of the stc registers on the m series boards. For the other boards
supported by the ni_pcimio driver, the direct access of the first 8
STC registers is also disabled due to a difference on the 611x devices.
These differences can all be handled in the ni_stc_{read,write}[lw]()
helpers. Refactor the helpers and remove the callbacks from the private
data.
Also, move the helper functions the handle the mapping of the windowed
STC register offsets to M series register offset from ni_pcimio.c to
ni_mio_common.c.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: ni_stc.h: remove read/write callbacks from ni_private
The drivers that include ni_mio_common.c set the read/write callbacks
to private functions that handle the read/write operations in the
correct manner for the hardware. The ni_atmio and ni_mio_cs drivers
use ioport register access and the ni_pcimio driver uses memory mapped
register access. The memory mapped base address is stored in the 'mite'
pointer in the private data which is only allocated and initialized by
the ni_pcimio driver.
Detect the need for memory mapped register access by checking if the
'mite' pointer is set in the private data and remove the callbacks
from the private data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: ni_mio_common.c: wrap the read/write operations
The ni_atmio, ni_pcimio, and ni_mio_cs drivers all include this source
file to handle the common functionality of the drivers. Each of those
drivers set some function pointers in the private data to handle the
read/write operations to the normal registers.
Like done for the stc register operations, wrap these operations with
some helper functions to clarify the code a bit and make it easier to
read and maintain.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: ni_mio_common.c: wrap the stc_read/write operations
The ni_atmio, ni_pcimio, and ni_mio_cs drivers all include this source
file to handle the common functionality of the drivers. Each of those
drivers set some function pointers in the private data to handle the
read/write operations to the stc registers.
Wrap these operations with some helper functions to clarify the code
a bit and make it easier to read and maintain.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: ni_stc.h: add a 'is_m_series' flag to private data
The (board->reg_type & ni_reg_m_series_mask) test is commonly used
in ni_mio_common.c to detect if the driver is being used with a
National Instruments "M series" DAQ board. Simplify the code a bit
by adding an 'is_m_series' bit-field flag to the private data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Thu, 19 Jun 2014 09:37:29 +0000 (11:37 +0200)]
staging: rtl8723au: issue_probersp(): Do not copy the IEs in front of probe_resp data
Another case where the driver was copying IEs in front of the
probe_resp data in the management frame, when running in AP mode. This
would result in badly corrupted frames hitting the wire - ouf ouf ouf!
Jes Sorensen [Thu, 19 Jun 2014 09:37:27 +0000 (11:37 +0200)]
staging: rtl8723au: issue_beacon23a(): Do not copy IEs in front of beacon data
Not sure how this happened, but one should never copy the IEs in front
of the beacon frame info. This could lead to some nasty corrupted
beacon frames hitting the wire if running AP mode - ouf!
Jes Sorensen [Thu, 19 Jun 2014 09:37:24 +0000 (11:37 +0200)]
staging: rtl8723au: Update bss beacon info in rtw_add_beacon()
Pull out the core info beacon_interval, capability, and tsf and update
cur_network.network with the info in rtw_add_beacon() instead of
relying on it being in ->IEs.
This will help later when getting rid of the beacon struct info from
->IEs and only carrying the actual IEs there.
Jes Sorensen [Thu, 19 Jun 2014 09:37:17 +0000 (11:37 +0200)]
staging: rtl8723au: rtw_cfg80211_inform_bss(): Use cfg80211_inform_bss()
There is no point in creating a fake beacon frame to call
cfg80211_inform_bss_frame() when we can just call
cfg80211_inform_bss() with the parameters we were sticking into the
fake frame.
Merge tag 'iio-for-3.17a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
First round of new drivers, cleanups and functionality for the 3.17 cycle.
New drivers
* t5403 barometric pressure sensor
* kxcjk1013 accelerometer (with a locking followup fix).
* ak09911 digital compass
Documentation
* ABI docs for proximity added (interface has been there a long time but
somehow snuck through without being documented)
* Move iio-trig-sysfs documentation out of staging (got left behind when
the driver moved some time ago).
Cleanups
* drop the timestamp argument from iio_trigger_poll(_chained) as
nothing has been done with it for some time.
* ad799x kerneldoc for ad799x_chip brought up to date.
* replace a number of reimplementations of the GENMASK macro and
use the BIT macro to cleanup a few locations.
* bring the iio_event_monitor example program up to date with new
device types.
* fix some incorrect function prototypes in iio_utils.h example code.
* INDIO_RING_TRIGGERED to INDIO_BUFFER_TRIGGERED fix in docs. This
got left behind after we renamed it a long time back.
* fix error handling in the generic_buffer example program.
* small tidy ups in the iio-trig-periodic-rtc driver.
* Allow reseting iio-trig-periodic-rtc frequency to 0 (default) after
it has changed.
* Trivial tidy ups in coding style in iio_simply_dummy
fixed: WARNING: line over 80 characters, used a new variable 'size_index' to
store the offset. Replaced "unsigned long" with "loff_t" type for
'cur_index'. Removed the parenthesis around the second part of the if statement following the '||' as its not required.
Scott Weir [Mon, 16 Jun 2014 10:44:51 +0000 (20:44 +1000)]
staging: lustre: Fix sparse warnings for undeclared symbols
This patch fixes the sparse warnings in drivers/staging/lustre/lustre/ptlrpc/sec_lproc.c:
sec_lproc.c:58:6: warning: symbol 'sec_flags2str' was not declared. Should it be static?
Signed-off-by: Scott Weir <sjw0410@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vitaly Osipov [Sat, 14 Jun 2014 07:29:51 +0000 (17:29 +1000)]
staging: lustre: remove memset(0) after LIBCFS_ALLOC
Joe Perches mentioned on driverdev-devel that memset after LIBCFS_ALLOC
is not necessary as it is already done during LIBCFS_ALLOC_POST. This
commit removes these unnecessary memsets. Based on the results of running
a cocci patch along the lines of:
John Church [Mon, 2 Jun 2014 13:31:10 +0000 (14:31 +0100)]
staging: lustre: fix sparse warnings for undeclared symbols
This patch fixes the following sparse warnings for drivers/staging/lustre/lnet/lnet/router.c:
router.c:139:1: warning: symbol 'lnet_ni_notify_locked' was not declared. Should it be static?
router.c:277:1: warning: symbol 'lnet_add_route_to_rnet' was not declared. Should it be static?
Signed-off-by: John Church <sleeveroller@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / linux-beck.git / log