Peng Tao [Mon, 1 Dec 2014 00:22:18 +0000 (08:22 +0800)]
nfs41: add NFS_LAYOUT_RETRY_LAYOUTGET to layout header flags
Use it to indicate that LD wants to retry layoutget. LD can set
it whenever it wants the common pnfs code to return and retry
pnfs path through a new layout.
The bit gets cleared when client does a new layoutget, when client
closes the file (ROC case), or when kernel needs to evict the inode
(non-ROC case).
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Peng Tao [Mon, 17 Nov 2014 01:30:41 +0000 (09:30 +0800)]
nfs41: introduce NFS_LAYOUT_RETURN_BEFORE_CLOSE
When it is set, generic pnfs would try to send layoutreturn right
before last close/delegation_return regard less NFS_LAYOUT_ROC is
set or not. LD can then make sure layoutreturn is always sent
rather than being omitted.
The difference against NFS_LAYOUT_RETURN is that
NFS_LAYOUT_RETURN_BEFORE_CLOSE does not block usage of the layout so
LD can set it and expect generic layer to try pnfs path at the
same time.
Signed-off-by: Peng Tao <tao.peng@primarydata.com> Signed-off-by: Tom Haynes <loghyr@primarydata.com>
Peng Tao [Mon, 10 Nov 2014 00:35:35 +0000 (08:35 +0800)]
nfs: add nfs_pgio_current_mirror helper
Let it return current nfs_pgio_mirror in use depending on pg_mirror_count.
For read, we always use pg_mirrors[0], so this effectively gives us freedom
to use pg_mirror_idx to track the actual mirror to read from through out the
IO stack.
Signed-off-by: Peng Tao <tao.peng@primarydata.com> Signed-off-by: Tom Haynes <loghyr@primarydata.com>
Peng Tao [Mon, 10 Nov 2014 00:35:34 +0000 (08:35 +0800)]
nfs: only reset desc->pg_mirror_idx when mirroring is supported
so that we don't reset desc->pg_mirror_idx for read unnecessarily.
Remove WARN_ON_ONCE from __nfs_pageio_add_request to allow LD to
set pg_mirror_idx for read where pg_mirror_count is always 1.
Signed-off-by: Peng Tao <tao.peng@primarydata.com> Signed-off-by: Tom Haynes <loghyr@primarydata.com>
The current mirroring code only notices short writes to the first
mirror. This patch keeps per-mirror byte counts and only considers
a byte to be written once all mirrors report so.
This patch adds mirrored write support to the pgio layer. The default
is to use one mirror, but pgio callers may define callbacks to change
this to any value up to the (arbitrarily selected) limit of 16.
The basic idea is to break out members of nfs_pageio_descriptor that cannot
be shared between mirrored DSes and put them in a new structure.
Pass ds_commit_idx through the nfs commit path. It's used to select
the commit bucket when using pnfs and is ignored when not using pnfs.
Several functions had to be changed: nfs_retry_commit,
nfs_mark_request_commit, pnfs_mark_request_commit and the pnfs layout
driver .mark_request_commit functions.
Signed-off-by: Tom Haynes <loghyr@primarydata.com>
Peng Tao [Fri, 5 Sep 2014 16:53:29 +0000 (00:53 +0800)]
nfs/filelayout: use pnfs_error_mark_layout_for_return
Instead of calling layoutreturn directly, call pnfs_error_mark_layout_for_return
to mark layouts for return and let generic code return layout when
layout segments are freed.
Signed-off-by: Peng Tao <tao.peng@primarydata.com> Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>
Conflicts:
fs/nfs/filelayout/filelayout.c
Peng Tao [Fri, 5 Sep 2014 16:53:23 +0000 (00:53 +0800)]
nfs41: add a helper to mark layout for return
It marks all matching layout segments as NFS_LSEG_LAYOUTRETURN,
which is an indicator for pnfs_put_lseg() to send layoutreturn,
and also prevents pnfs_update_layout() from using the returning
segments. Once it is set, it never gets cleared.
It also sets proper io failure bit so that pnfs path can be retried
after PNFS_LAYOUTGET_RETRY_TIMEOUT second.
Signed-off-by: Peng Tao <tao.peng@primarydata.com> Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>
Peng Tao [Fri, 22 Aug 2014 09:37:41 +0000 (17:37 +0800)]
nfs41: serialize first layoutget of a file
Per RFC 5661 Errata 3208:
| A client MAY always forget its layout state and associated
| layout stateid at any time (See also section 12.5.5.1).
| In such case, the client MUST use a non-layout stateid for the next
| LAYOUTGET operation. This will signal the server that the client has
| no more layouts on the file and its respective layout state can be
| released before issuing a new layout in response to LAYOUTGET.
In order to make such a signal unique to server, client needs to serialize
all layoutgets using non-layout stateid. We implement this by serializing
layoutgets when client has no layout segments at hand.
Signed-off-by: Peng Tao <tao.peng@primarydata.com> Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>
Peng Tao [Mon, 7 Jul 2014 22:21:10 +0000 (06:21 +0800)]
nfs: set hostname when creating nfsv3 ds connection
lockd assumes hostname exists otherwise kernel oops.
It can be reproduced by following steps:
1. mount flexfile MDS
2. write some files
3. mount DS via nfsv3
Peng Tao [Fri, 30 May 2014 10:15:55 +0000 (18:15 +0800)]
nfs41: move file layout macros to generic pnfs
They can be reused by flexfile layout as well.
Also add a code such that if read fails on one DS and
there are other DSes available to use, don't resend
through MDS but through pNFS so that client can read
from other DSes.
Reviewed-by: Jeff Layton <jlayton@primarydata.com> Signed-off-by: Peng Tao <tao.peng@primarydata.com> Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>
Peng Tao [Thu, 29 May 2014 13:07:00 +0000 (21:07 +0800)]
nfs41: allow LD to choose DS connection auth flavor
flexfile layout may use different auth flavor as specified by MDS.
Reviewed-by: Jeff Layton <jlayton@primarydata.com> Signed-off-by: Peng Tao <tao.peng@primarydata.com> Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>
Peng Tao [Thu, 29 May 2014 13:06:58 +0000 (21:06 +0800)]
nfs41: pull nfs4_ds_connect from file layout to generic pnfs
It can be reused by flexfiles layout client.
Reviewed-by: Jeff Layton <jlayton@primarydata.com> Signed-off-by: Peng Tao <tao.peng@primarydata.com> Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>
Peng Tao [Thu, 29 May 2014 13:06:59 +0000 (21:06 +0800)]
nfs41: pull decode_ds_addr from file layout to generic pnfs
It can be reused by flexfile layout.
Reviewed-by: Jeff Layton <jlayton@primarydata.com> Signed-off-by: Peng Tao <tao.peng@primarydata.com> Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>
Peng Tao [Thu, 29 May 2014 13:06:57 +0000 (21:06 +0800)]
nfs41: pull data server cache from file layout to generic pnfs
Also pull nfs4_pnfs_ds_addr and nfs4_pnfs_ds to generic pnfs.
They can all be reused by flexfile layout as well.
Reviewed-by: Jeff Layton <jlayton@primarydata.com> Signed-off-by: Peng Tao <tao.peng@primarydata.com> Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>
Tom Haynes [Thu, 11 Dec 2014 20:34:59 +0000 (15:34 -0500)]
pnfs: Prepare for flexfiles by pulling out common code
The flexfilelayout driver will share some common code
with the filelayout driver. This set of changes refactors
that common code out to avoid any module depenencies.
Signed-off-by: Tom Haynes <loghyr@primarydata.com>
Linus Torvalds [Sun, 18 Jan 2015 06:00:40 +0000 (18:00 +1200)]
Merge tag 'armsoc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"We've been sitting on our fixes branch for a while, so this batch is
unfortunately on the large side.
A lot of these are tweaks and fixes to device trees, fixing various
bugs around clocks, reg ranges, etc. There's also a few defconfig
updates (which are on the late side, no more of those).
All in all the diffstat is bigger than ideal at this time, but nothing
in here seems particularly risky"
* tag 'armsoc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (31 commits)
reset: sunxi: fix spinlock initialization
ARM: dts: disable CCI on exynos5420 based arndale-octa
drivers: bus: check cci device tree node status
ARM: rockchip: disable jtag/sdmmc autoswitching on rk3288
ARM: nomadik: fix up leftover device tree pins
ARM: at91: board-dt-sama5: add phy_fixup to override NAND_Tree
ARM: at91/dt: sam9263: Add missing clocks to lcdc node
ARM: at91: sama5d3: dt: correct the sound route
ARM: at91/dt: sama5d4: fix the timer reg length
ARM: exynos_defconfig: Enable LM90 driver
ARM: exynos_defconfig: Enable options for display panel support
arm: dts: Use pmu_system_controller phandle for dp phy
ARM: shmobile: sh73a0 legacy: Set .control_parent for all irqpin instances
ARM: dts: berlin: correct BG2Q's SM GPIO location.
ARM: dts: berlin: add broken-cd and set bus width for eMMC in Marvell DMP DT
ARM: dts: berlin: fix io clk and add missing core clk for BG2Q sdhci2 host
ARM: dts: Revert disabling of smc91x for n900
ARM: dts: imx51-babbage: Fix ULPI PHY reset modelling
ARM: dts: dra7-evm: fix qspi device tree partition size
ARM: omap2plus_defconfig: use CONFIG_CPUFREQ_DT
...
Linus Torvalds [Sun, 18 Jan 2015 03:29:11 +0000 (15:29 +1200)]
Merge tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mike.turquette/linux
Pull clock driver fixes from Mike Turquette:
"Small number of fixes for clock drivers and a single null pointer
dereference fix in the framework core code.
The driver fixes vary from fixing section mismatch warnings to
preventing machines from hanging (and preventing developers from
crying)"
* tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mike.turquette/linux:
clk: fix possible null pointer dereference
Revert "clk: ppc-corenet: Fix Section mismatch warning"
clk: rockchip: fix deadlock possibility in cpuclk
clk: berlin: bg2q: remove non-exist "smemc" gate clock
clk: at91: keep slow clk enabled to prevent system hang
clk: rockchip: fix rk3288 cpuclk core dividers
clk: rockchip: fix rk3066 pll lock bit location
clk: rockchip: Fix clock gate for rk3188 hclk_emem_peri
clk: rockchip: add CLK_IGNORE_UNUSED flag to fix rk3066/rk3188 USB Host
Linus Torvalds [Sun, 18 Jan 2015 03:26:52 +0000 (15:26 +1200)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is one fix for a Multiqueue sleeping in invalid context problem
and a MAINTAINER file update for Qlogic"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ->queue_rq can't sleep
MAINTAINERS: Update maintainer list for qla4xxx
The commit 646cafc6 (clk: Change clk_ops->determine_rate to
return a clk_hw as the best parent) opens a possibility for
null pointer dereference, fix this.
Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Michael Turquette <mturquette@linaro.org>
That commit tried to fix the section mismatch warning by moving the
ppc_corenet_clk_driver struct to init section. This is definitely wrong
because the kernel would free the memories occupied by this struct
after boot while this driver is still registered in the driver core.
The kernel would panic when accessing this driver struct.
Cc: stable@vger.kernel.org # 3.17 Signed-off-by: Kevin Hao <haokexin@gmail.com> Acked-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Michael Turquette <mturquette@linaro.org>
Linus Torvalds [Sat, 17 Jan 2015 18:26:24 +0000 (06:26 +1200)]
Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine fixes from Vinod Koul:
"Two patches, the first by Andy to fix dw dmac runtime pm and second
one by me to fix the dmaengine headers in MAINTAINERS"
* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: dw: balance PM runtime calls
MAINTAINERS: dmaengine: fix the header file for dmaengine
Linus Torvalds [Sat, 17 Jan 2015 18:24:30 +0000 (06:24 +1200)]
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"Mostly tooling fixes, but also two PMU driver fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf tools powerpc: Use dwfl_report_elf() instead of offline.
perf tools: Fix segfault for symbol annotation on TUI
perf test: Fix dwarf unwind using libunwind.
perf tools: Avoid build splat for syscall numbers with uclibc
perf tools: Elide strlcpy warning with uclibc
perf tools: Fix statfs.f_type data type mismatch build error with uclibc
tools: Remove bitops/hweight usage of bits in tools/perf
perf machine: Fix __machine__findnew_thread() error path
perf tools: Fix building error in x86_64 when dwarf unwind is on
perf probe: Propagate error code when write(2) failed
perf/x86/intel: Fix bug for "cycles:p" and "cycles:pp" on SLM
perf/rapl: Fix sysfs_show() initialization for RAPL PMU
Olof Johansson [Thu, 15 Jan 2015 23:45:18 +0000 (15:45 -0800)]
Merge tag 'samsung-fixes-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes
Merge "Samsung fixes for v3.19" from Kukjin Kim:
Samsung fixes for v3.19
- exynos_defconfig: enable LM90 driver and display panel support
- HWMON
- SENSORS_LM90
- Direct Rendering Manager (DRM)
- DRM bridge registration and lookup framework
- Parade ps8622/ps8625 eDP/LVDS bridge
- NXP ptn3460 eDP/LVDS bridge
- Exynos Fully Interactive Mobile Display controller (FIMD)
- Panel registration and lookup framework
- Simple panels
- Backlight & LCD device support
- use pmu_system_controller phandle for dp phy
: DP PHY requires pmu_system_controller to handle PMU reg. now
* tag 'samsung-fixes-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: exynos_defconfig: Enable LM90 driver
ARM: exynos_defconfig: Enable options for display panel support
arm: dts: Use pmu_system_controller phandle for dp phy
Tyler Baker [Mon, 12 Jan 2015 15:54:46 +0000 (07:54 -0800)]
reset: sunxi: fix spinlock initialization
Call spin_lock_init() before the spinlocks are used, both in early init
and probe functions preventing a lockdep splat.
I have been observing lockdep complaining [1] during boot on my a80 optimus [2]
when CONFIG_PROVE_LOCKING has been enabled. This patch resolves the splat,
and has been tested on a few other sunxi platforms without issue.
Olof Johansson [Tue, 13 Jan 2015 23:32:43 +0000 (15:32 -0800)]
Merge tag 'renesas-soc-fixes-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes
Merge "Renesas ARM Based SoC Fixes for v3.19" from Simon Horman:
Renesas ARM Based SoC Fixes for v3.19
This pull request is based on the last round of SoC updates for v3.19,
Fourth Round of Renesas ARM Based SoC Updates for v3.19, tagged as
renesas-soc3-for-v3.19, merged into your next/soc branch and included in
v3.19-rc1.
- ARM: shmobile: r8a7740: Instantiate GIC from C board code in legacy builds
Set .control_parent for all irqpin instances for sh73a0 SoC when booting
using legacy C.
- ARM: shmobile: r8a7740: Instantiate GIC from C board code in legacy builds
This fixes a long standing problem which has been present since
the sh73a0 SoC started using the INTC External IRQ pin driver.
The patch that introduced the problem is 341eb5465f67437a ("ARM:
shmobile: INTC External IRQ pin driver on sh73a0") which was included
in v3.10.
* tag 'renesas-soc-fixes-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: sh73a0 legacy: Set .control_parent for all irqpin instances
ARM: shmobile: r8a7740: Instantiate GIC from C board code in legacy builds
Abhilash Kesavan [Sat, 10 Jan 2015 03:11:36 +0000 (08:41 +0530)]
ARM: dts: disable CCI on exynos5420 based arndale-octa
The arndale-octa board was giving "imprecise external aborts" during
boot-up with MCPM enabled. CCI enablement of the boot cluster was found
to be the cause of these aborts (possibly because the secure f/w was not
allowing it). Hence, disable CCI for the arndale-octa board.
Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Kevin Hilman <khilman@linaro.org> Tested-by: Tyler Baker <tyler.baker@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
Abhilash Kesavan [Sat, 10 Jan 2015 03:11:35 +0000 (08:41 +0530)]
drivers: bus: check cci device tree node status
The arm-cci driver completes the probe sequence even if the cci node is
marked as disabled. Add a check in the driver to honour the cci status
in the device tree.
Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Nicolas Pitre <nico@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
Heiko Stübner [Sun, 11 Jan 2015 22:09:23 +0000 (23:09 +0100)]
ARM: rockchip: disable jtag/sdmmc autoswitching on rk3288
rk3288 SoCs have a function to automatically switch between jtag/sdmmc pinmux
settings depending on the card state. This collides with a lot of assumptions.
It only works when using the internal card-detect mechanism and breaks
horribly when using either the normal card-detect via the slot-gpio function
or via any other pin. Also there is of course no link between the mmc and jtag
on the software-side, so the jtag clocks may very well be disabled when the
card is ejected and the soc switches back to the jtag pinmux.
Leaving the switching function enabled did result in mmc timeouts and rcu
stalls thus hanging the system on 3.19-rc1. Therefore disable it in all cases,
as we expect the devicetree to explicitly select either mmc or jtag pinmuxes
anyway.
Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sun, 11 Jan 2015 21:07:05 +0000 (13:07 -0800)]
Merge tag 'berlin-fixes-for-3.19-1' of git://git.infradead.org/users/hesselba/linux-berlin into fixes
Merge "ARM: berlin: Fixes for v3.19 (round 1)" from Sebastian Hesselbarth:
Marvell Berlin fixes for v3.19 round 1:
- SDHCI DT fixes for BG2Q and BG2Q reference board
- BG2Q SM GPIO DT node relocation
* tag 'berlin-fixes-for-3.19-1' of git://git.infradead.org/users/hesselba/linux-berlin:
ARM: dts: berlin: correct BG2Q's SM GPIO location.
ARM: dts: berlin: add broken-cd and set bus width for eMMC in Marvell DMP DT
ARM: dts: berlin: fix io clk and add missing core clk for BG2Q sdhci2 host
Linus Walleij [Fri, 9 Jan 2015 19:11:20 +0000 (20:11 +0100)]
ARM: nomadik: fix up leftover device tree pins
We altered the device tree bindings for the Nomadik family of
pin controllers to be standard, this file was merged out-of-order
so we missed fixing this. Fix it up.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Thu, 8 Jan 2015 22:43:00 +0000 (14:43 -0800)]
Merge tag 'omap-for-v3.19/fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
Merge "omap fixes against v3.19-rc1" from Tony Lindgren:
Fixes for omaps mostly to deal with dra7 timer issues
and hypervisor mode. The other fixes are minor fixes for
various boards. The summary of the fixes is:
- Fix real-time counter rate typos for some frequencies
- Fix counter frequency drift for am572x
- Fix booting of secondary CPU in HYP mode
- Fix n900 board name for legacy user space
- Fix cpufreq in omap2plus_defconfig after Kconfig change
- Fix dra7 qspi partitions
And also, let's re-enable smc91x on some n900 boards that
we have sitting in a few test boot systems after the boot
loader dependencies got fixed.
* tag 'omap-for-v3.19/fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: Revert disabling of smc91x for n900
ARM: dts: dra7-evm: fix qspi device tree partition size
ARM: omap2plus_defconfig: use CONFIG_CPUFREQ_DT
ARM: OMAP2+: Fix n900 board name for legacy user space
ARM: omap5/dra7xx: Enable booting secondary CPU in HYP mode
ARM: dra7xx: Fix counter frequency drift for AM572x errata i856
ARM: omap5/dra7xx: Fix frequency typos
Olof Johansson [Thu, 8 Jan 2015 22:42:11 +0000 (14:42 -0800)]
Merge tag 'imx-fixes-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes
Merge "ARM: imx: fixes for 3.19" from Shawn Guo:
The i.MX fixes for 3.19:
- One fix for incorrect i.MX25 SPI1 clock assignment in device tree,
which causes system hang when accessing SPI1.
- Correct i.MX6SX QSPI parent clock configuration to fix a kernel Oops.
- Fix ULPI PHY reset modelling on imx51-babbage board to remove the
dependency on bootloader for USB3317 ULPI PHY reset.
- Correct video divider setting on i.MX6Q rev T0 1.0 to fix the issue
that HDMI is not working at high resolution on T0 1.0.
- One incremental fix for CODA960 VPU enabling in device tree to
correct interrupt order.
- LS1021A SCFG block works in BE mode, add device tree property
big-endian to make it right.
* tag 'imx-fixes-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx51-babbage: Fix ULPI PHY reset modelling
ARM: imx6sx: Set PLL2 as parent of QSPI clocks
ARM: dts: imx25: Fix the SPI1 clocks
ARM: clk-imx6q: fix video divider for rev T0 1.0
ARM: dts: imx6qdl: Fix CODA960 interrupt order
ARM: ls1021a: dtsi: add 'big-endian' property for scfg node
Olof Johansson [Thu, 8 Jan 2015 22:38:36 +0000 (14:38 -0800)]
Merge tag 'v3.19-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into fixes
Merge "ARM: rockchip: dts fix for 3.19" from Heiko Stübner:
Increase drive-strength to sdmmc pins on rk3288-evb to fix
an issue with the fixed highspeed card detection.
* tag 'v3.19-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: bump sd card pin drive strength up on rk3288-evb
Louis Langholtz [Fri, 16 Jan 2015 05:04:46 +0000 (22:04 -0700)]
kernel: avoid overflow in cmp_range
Avoid overflow possibility.
[ The overflow is purely theoretical, since this is used for memory
ranges that aren't even close to using the full 64 bits, but this is
the right thing to do regardless. - Linus ]
Signed-off-by: Louis Langholtz <lou_langholtz@me.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Peter Anvin <hpa@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Namhyung Kim [Wed, 14 Jan 2015 11:18:05 +0000 (20:18 +0900)]
perf tools: Fix segfault for symbol annotation on TUI
Currently the symbol structure is allocated with symbol_conf.priv_size
to carry sideband information like annotation, map browser on TUI and
sort-by-name tree node. So retrieving these information from symbol
needs to care about the details of such placement.
However the annotation code just assumes that the symbol is placed after
the struct annotation. But actually there's other info between them.
So accessing those struct will lead to an undefined behavior (usually a
crash) after they write their info to the same location.
To reproduce the problem, please follow the steps below:
1. run perf report (TUI of course) with -v option
2. open map browser (by pressing right arrow key for any entry)
3. search any function (by pressing '/' key and input whatever..)
4. return to the hist browser (by pressing 'q' or left arrow key)
5. open annotation window for the same entry (by pressing 'a' key)
Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1421234288-22758-1-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Wang Nan [Wed, 14 Jan 2015 02:36:47 +0000 (10:36 +0800)]
perf test: Fix dwarf unwind using libunwind.
Perf tool fails to unwind user stack if the event raises in a shared
object. This patch improves tests/dwarf-unwind.c to demonstrate the
problem by utilizing commonly used glibc function "bsearch". If perf is
not statically linked, the testcase will try to unwind a mixed call
trace.
By debugging libunwind I found that there is a bug in unwind-libunwind:
it always passes 0 as segbase to libunwind, cause libunwind unable to
locate debug_frame entry fir first level ip address (I add some more
debugging output into libunwind to make things clear):
This patch passes map->start as segbase to dwarf_find_debug_frame(), so
di will be initialized correctly.
In addition, dso and executable are different when setting segbase. This
patch first check whether the elf is executable, and pass segbase only
for shared object.
Signed-off-by: Wang Nan <wangnan0@huawei.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Li Zefan <lizefan@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1421203007-75799-1-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Vineet Gupta [Tue, 13 Jan 2015 13:43:22 +0000 (19:13 +0530)]
perf tools: Avoid build splat for syscall numbers with uclibc
This is due to duplicated unistd inclusion (via uClibc headers + kernel headers)
Also seen on ARM uClibc based tools
------- ARC build ---------->8-------------
CC util/evlist.o
In file included from
~/arc/k.org/arch/arc/include/uapi/asm/unistd.h:25:0,
from util/../perf-sys.h:10,
from util/../perf.h:15,
from util/event.h:7,
from util/event.c:3:
~/arc/k.org/include/uapi/asm-generic/unistd.h:906:0:
warning: "__NR_fcntl64" redefined [enabled by default]
#define __NR_fcntl64 __NR3264_fcntl
^
In file included from
~/arc/gnu/INSTALL_1412-arc-2014.12-rc1/arc-snps-linux-uclibc/sysroot/usr/include/sys/syscall.h:24:0,
from util/../perf-sys.h:6,
----------------->8-------------------
------- ARM build ---------->8-------------
CC FPIC plugin_scsi.o
In file included from util/../perf-sys.h:9:0,
from util/../perf.h:15,
from util/cache.h:7,
from perf.c:12:
~/arc/k.org/arch/arm/include/uapi/asm/unistd.h:28:0:
warning: "__NR_restart_syscall" redefined [enabled by default]
In file included from
~/buildroot/host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/include/sys/syscall.h:25:0,
from util/../perf-sys.h:6,
from util/../perf.h:15,
from util/cache.h:7,
from perf.c:12:
~/buildroot/host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/include/bits/sysnum.h:17:0:
note: this is the location of the previous definition
----------------->8-------------------
Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Cc: Alexey Brodkin <Alexey.Brodkin@synopsys.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1421156604-30603-4-git-send-email-vgupta@synopsys.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Vineet Gupta [Tue, 13 Jan 2015 13:43:21 +0000 (19:13 +0530)]
perf tools: Elide strlcpy warning with uclibc
----------------->8------------------
CC bench/sched-pipe.o
In file included from builtin-annotate.c:13:0:
util/cache.h:76:15: warning: redundant redeclaration of 'strlcpy'
[-Wredundant-decls]
extern size_t strlcpy(char *dest, const char *src, size_t size);
^
In file included from util/util.h:55:0,
from builtin.h:4,
from builtin-annotate.c:8:
~/vineetg/arc/gnu/INSTALL_1412-arc-2014.12-rc1/arc-snps-linux-uclibc/sysroot/usr/include/string.h:396:15:
note: previous declaration of 'strlcpy' was here
extern size_t strlcpy(char *__restrict dst, const char *__restrict src,
----------------->8------------------
Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Cc: Alexey Brodkin <Alexey.Brodkin@synopsys.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1421156604-30603-3-git-send-email-vgupta@synopsys.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
----------->8---------------
CC fs/fs.o
fs/fs.c: In function 'fs__valid_mount':
fs/fs.c:82:24: error: comparison between signed and unsigned integer
expressions [-Werror=sign-compare]
else if (st_fs.f_type != magic)
^
cc1: all warnings being treated as errors
----------->8---------------
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: Cody P Schafer <dev@codyps.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com> Link: http://lkml.kernel.org/r/1420888254-17504-2-git-send-email-vgupta@synopsys.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
tools: Remove bitops/hweight usage of bits in tools/perf
We need to use lib/hweight.c for that, just like we do for lib/rbtree.c,
so tools need to link hweight.o. For now do it directly, but we need to
have a tools/lib/lk.a or .so that collects these goodies...
Reported-by: Jan Beulich <JBeulich@suse.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-a1e91dx3apzqw5kbdt7ut21s@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When thread__init_map_groups() fails, a new thread should be removed
from the rbtree since it's gonna be freed. Also update last match cache
only if the function succeeded.
Reported-by: David Ahern <dsahern@gmail.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1420763892-15535-1-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Mon, 12 Jan 2015 02:20:55 +0000 (10:20 +0800)]
perf tools: Fix building error in x86_64 when dwarf unwind is on
When build with 'make ARCH=x86' and dwarf unwind is on, there is a
compiling error:
CC /home/wn/perf/arch/x86/util/unwind-libdw.o
CC /home/wn/perf/arch/x86/tests/regs_load.o
arch/x86/tests/regs_load.S: Assembler messages:
arch/x86/tests/regs_load.S:65: Error: operand type mismatch for `push'
arch/x86/tests/regs_load.S:72: Error: operand type mismatch for `pop'
make[1]: *** [/home/wn/perf/arch/x86/tests/regs_load.o] Error 1
make[1]: INTERNAL: Exiting with 25 jobserver tokens available; should be 24!
make: *** [all] Error 2
...
Which is caused by incorrectly undefine macro HAVE_ARCH_X86_64_SUPPORT.
'config/Makefile.arch' tests __x86_64__ only when 'ARCH=x86_64'.
However, when building x86_64 kernel, ARCH=x86 is valid and commonly
used. Build systems, such as yocto, uses x86_64 compiler with 'ARCH=x86'
to build x86_64 perf, which causes mismatching.
As __LP64__ is defined for x86_64 as well, we can consolidate the
__x86_64__ check to the __LP64__ check and get rid of the IS_X86_64
IMHO.
(This patch is made by Namhyung Kim when replying my v1 patch:
https://lkml.org/lkml/2015/1/7/17
I modified the code to remove dependency on RAW_ARCH:
https://lkml.org/lkml/2015/1/7/865
Namhyung Kim didn't provide his SOB in his original email. I add
mine only for my modification.)
Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Wang Nan <wangnan0@huawei.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Li Zefan <lizefan@huawei.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1421029255-23039-1-git-send-email-wangnan0@huawei.com
[ Namhyung provided his S-o-B on a followup to this patch thread on lkml ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Sat, 10 Jan 2015 10:33:48 +0000 (19:33 +0900)]
perf probe: Propagate error code when write(2) failed
When it failed to write probe commands to the probe_event file in
debugfs, it needs to propagate the error code properly. Current code
blindly uses the return value of the write(2) so it always uses
-1 (-EPERM) and it might confuse users.
Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1420886028-15135-4-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Linus Torvalds [Fri, 16 Jan 2015 19:18:08 +0000 (08:18 +1300)]
Merge tag 'char-misc-3.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are three small driver fixes for reported issues for 3.19-rc5.
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-3.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
mcb: mcb-pci: Only remap the 1st 0x200 bytes of BAR 0
mei: add ABI documentation for fw_status exported through sysfs
mei: clean reset bit before reset
Linus Torvalds [Fri, 16 Jan 2015 19:15:49 +0000 (08:15 +1300)]
Merge tag 'tty-3.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are some tty and serial driver fixes for 3.19-rc5 that resolve
some reported issues, and add a new device id to the 8250 serial port
driver.
All have been in linux-next with no reported problems"
* tag 'tty-3.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: samsung: Add the support for Exynos5433 SoC
Revert "tty: Fix pty master poll() after slave closes v2"
tty: Prevent hw state corruption in exclusive mode reopen
tty: Add support for the WCH384 4S multi-IO card
serial: fix parisc boot hang
Linus Torvalds [Fri, 16 Jan 2015 19:02:44 +0000 (08:02 +1300)]
Merge tag 'usb-3.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here is a bunch of USB fixes for 3.19-rc5.
Most of these are gadget driver fixes, along with the xhci driver fix
that we both reported having problems with, as well as some new device
ids and other tiny fixes.
All have been in linux-next with no problems"
* tag 'usb-3.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (43 commits)
usb: dwc3: gadget: Stop TRB preparation after limit is reached
usb: dwc3: gadget: Fix TRB preparation during SG
usb: phy: mv-usb: fix usb_phy build errors
usb: serial: handle -ENODEV quietly in generic_submit_read_urb
usb: serial: silence all non-critical read errors
USB: console: fix potential use after free
USB: console: fix uninitialised ldisc semaphore
usb: gadget: udc: atmel: fix possible oops when unloading module
usb: gadget: gadgetfs: fix an oops in ep_write()
usb: phy: Fix deferred probing
OHCI: add a quirk for ULi M5237 blocking on reset
uas: Add US_FL_NO_ATA_1X for 2 more Seagate disk enclosures
uas: Do not blacklist ASM1153 disk enclosures
usb: gadget: udc: avoid dereference before NULL check in ep_queue
usb: host: ehci-tegra: request deferred probe when failing to get phy
uas: disable UAS on Apricorn SATA dongles
uas: Add US_FL_NO_REPORT_OPCODES for JMicron JMS566 with usb-id 0bc2:a013
uas: Add US_FL_NO_ATA_1X for Seagate devices with usb-id 0bc2:a013
xhci: Add broken-streams quirk for Fresco Logic FL1000G xhci controllers
USB: EHCI: adjust error return code
...
Linus Torvalds [Fri, 16 Jan 2015 19:01:21 +0000 (08:01 +1300)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
- Wire up compat_sys_execveat for compat (AArch32) tasks
- Revert 421520ba9829, as this breaks our side of the boot protocol
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: partially revert "ARM: 8167/1: extend the reserved memory for initrd to be page aligned"
arm64: compat: wire up compat_sys_execveat
Linus Torvalds [Fri, 16 Jan 2015 18:59:06 +0000 (07:59 +1300)]
Merge tag 'nfs-for-3.19-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfixes from Trond Myklebust:
"Highlights include:
- Stable fix for a NFSv3/lockd race
- Fixes for several NFSv4.1 client id trunking bugs
- Remove an incorrect test when checking for delegated opens"
* tag 'nfs-for-3.19-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFSv4: Remove incorrect check in can_open_delegated()
NFS: Ignore transport protocol when detecting server trunking
NFSv4/v4.1: Verify the client owner id during trunking detection
NFSv4: Cache the NFSv4/v4.1 client owner_id in the struct nfs_client
NFSv4.1: Fix client id trunking on Linux
LOCKD: Fix a race when initialising nlmsvc_timeout
Linus Torvalds [Fri, 16 Jan 2015 18:55:52 +0000 (07:55 +1300)]
Merge tag 'trace-fixes-v3.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull ftrace fixes from Steven Rostedt:
"This holds a few fixes to the ftrace infrastructure as well as the
mixture of function graph tracing and kprobes.
When jprobes and function graph tracing is enabled at the same time it
will crash the system:
After the first fork (jprobe_example probes it), the system will
crash.
This is due to the way jprobes copies the stack frame and does not do
a normal function return. This messes up with the function graph
tracing accounting which hijacks the return address from the stack and
replaces it with a hook function. It saves the return addresses in a
separate stack to put back the correct return address when done. But
because the jprobe functions do not do a normal return, their stack
addresses are not put back until the function they probe is called,
which means that the probed function will get the return address of
the jprobe handler instead of its own.
The simple fix here was to disable function graph tracing while the
jprobe handler is being called.
While debugging this I found two minor bugs with the function graph
tracing.
The first was about the function graph tracer sharing its function
hash with the function tracer (they both get filtered by the same
input). The changing of the set_ftrace_filter would not sync the
function recording records after a change if the function tracer was
disabled but the function graph tracer was enabled. This was due to
the update only checking one of the ops instead of the shared ops to
see if they were enabled and should perform the sync. This caused the
ftrace accounting to break and a ftrace_bug() would be triggered,
disabling ftrace until a reboot.
The second was that the check to update records only checked one of
the filter hashes. It needs to test both the "filter" and "notrace"
hashes. The "filter" hash determines what functions to trace where as
the "notrace" hash determines what functions not to trace (trace all
but these). Both hashes need to be passed to the update code to find
out what change is being done during the update. This also broke the
ftrace record accounting and triggered a ftrace_bug().
This patch set also include two more fixes that were reported
separately from the kprobe issue.
One was that init_ftrace_syscalls() was called twice at boot up. This
is not a major bug, but that call performed a rather large kmalloc
(NR_syscalls * sizeof(*syscalls_metadata)). The second call made the
first one a memory leak, and wastes memory.
The other fix is a regression caused by an update in the v3.19 merge
window. The moving to enable events early, moved the enabling before
PID 1 was created. The syscall events require setting the
TIF_SYSCALL_TRACEPOINT for all tasks. But for_each_process_thread()
does not include the swapper task (PID 0), and ended up being a nop.
A suggested fix was to add the init_task() to have its flag set, but I
didn't really want to mess with PID 0 for this minor bug. Instead I
disable and re-enable events again at early_initcall() where it use to
be enabled. This also handles any other event that might have its own
reg function that could break at early boot up"
* tag 'trace-fixes-v3.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Fix enabling of syscall events on the command line
tracing: Remove extra call to init_ftrace_syscalls()
ftrace/jprobes/x86: Fix conflict between jprobes and function graph tracing
ftrace: Check both notrace and filter for old hash
ftrace: Fix updating of filters for shared global_ops filters
Catalin Marinas [Fri, 16 Jan 2015 13:56:38 +0000 (13:56 +0000)]
arm64: partially revert "ARM: 8167/1: extend the reserved memory for initrd to be page aligned"
This patch partially reverts commit 421520ba98290a73b35b7644e877a48f18e06004
(only the arm64 part). There is no guarantee that the boot-loader places other
images like dtb in a different page than initrd start/end, especially when the
kernel is built with 64KB pages. When this happens, such pages must not be
freed. The free_reserved_area() already takes care of rounding up "start" and
rounding down "end" to avoid freeing partially used pages.
Cc: <stable@vger.kernel.org> # 3.17+ Reported-by: Peter Maydell <Peter.Maydell@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
UOPS_RETIRED.ALL is not a PEBS capable event, so it should not be used
to count cycle number.
Actually SLM calls intel_pebs_aliases_core2() which uses INST_RETIRED.ANY_P
to count the number of cycles. It's a PEBS capable event. But inv and
cmask must be set to count cycles.
Considering SLM allows all events as PEBS with no flags, only
INST_RETIRED.ANY_P, inv=1, cmask=16 needs to handled specially.
Signed-off-by: Kan Liang <kan.liang@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: http://lkml.kernel.org/r/1421084541-31639-1-git-send-email-kan.liang@intel.com Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
Stephane Eranian [Tue, 13 Jan 2015 22:59:53 +0000 (23:59 +0100)]
perf/rapl: Fix sysfs_show() initialization for RAPL PMU
This patch fixes a problem with the initialization of the
sysfs_show() routine for the RAPL PMU.
The current code was wrongly relying on the EVENT_ATTR_STR()
macro which uses the events_sysfs_show() function in the x86
PMU code. That function itself was relying on the x86_pmu data
structure. Yet RAPL and the core PMU (x86_pmu) have nothing to
do with each other. They should therefore not interact with
each other.
The x86_pmu structure is initialized at boot time based on
the host CPU model. When the host CPU is not supported, the
x86_pmu remains uninitialized and some of the callbacks it
contains are NULL.
The false dependency with x86_pmu could potentially cause crashes
in case the x86_pmu is not initialized while the RAPL PMU is. This
may, for instance, be the case in virtualized environments.
This patch fixes the problem by using a private sysfs_show()
routine for exporting the RAPL PMU events.
Linus Torvalds [Fri, 16 Jan 2015 01:55:47 +0000 (14:55 +1300)]
Merge tag 'fbdev-fixes-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux
Pull fbdev fixes from Tomi Valkeinen:
- broadsheetfb: fix memory leak
- simplefb: fix build failure on sparc
* tag 'fbdev-fixes-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux:
fbdev/broadsheetfb: fix memory leak
simplefb: Fix build failure on Sparc
Linus Torvalds [Fri, 16 Jan 2015 01:28:01 +0000 (14:28 +1300)]
Merge tag 'powerpc-3.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux
Pull powerpc fixes from Michael Ellerman:
"A few powerpc fixes"
* tag 'powerpc-3.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux:
powerpc: Work around gcc bug in current_thread_info()
cxl: Fix issues when unmapping contexts
powernv: Fix OPAL tracepoint code
tracing: Fix enabling of syscall events on the command line
Commit 5f893b2639b2 "tracing: Move enabling tracepoints to just after
rcu_init()" broke the enabling of system call events from the command
line. The reason was that the enabling of command line trace events
was moved before PID 1 started, and the syscall tracepoints require
that all tasks have the TIF_SYSCALL_TRACEPOINT flag set. But the
swapper task (pid 0) is not part of that. Since the swapper task is the
only task that is running at this early in boot, no task gets the
flag set, and the tracepoint never gets reached.
Instead of setting the swapper task flag (there should be no reason to
do that), re-enabled trace events again after the init thread (PID 1)
has been started. It requires disabling all command line events and
re-enabling them, as just enabling them again will not reset the logic
to set the TIF_SYSCALL_TRACEPOINT flag, as the syscall tracepoint will
be fooled into thinking that it was already set, and wont try setting
it again. For this reason, we must first disable it and re-enable it.
tracing: Remove extra call to init_ftrace_syscalls()
trace_init() calls init_ftrace_syscalls() and then calls trace_event_init()
which also calls init_ftrace_syscalls(). It makes more sense to only
call it from trace_event_init().
Calling it twice wastes memory, as it allocates the syscall events twice,
and loses the first copy of it.
ftrace/jprobes/x86: Fix conflict between jprobes and function graph tracing
If the function graph tracer traces a jprobe callback, the system will
crash. This can easily be demonstrated by compiling the jprobe
sample module that is in the kernel tree, loading it and running the
function graph tracer.
# modprobe jprobe_example.ko
# echo function_graph > /sys/kernel/debug/tracing/current_tracer
# ls
The first two commands end up in a nice crash after the first fork.
(do_fork has a jprobe attached to it, so "ls" just triggers that fork)
The problem is caused by the jprobe_return() that all jprobe callbacks
must end with. The way jprobes works is that the function a jprobe
is attached to has a breakpoint placed at the start of it (or it uses
ftrace if fentry is supported). The breakpoint handler (or ftrace callback)
will copy the stack frame and change the ip address to return to the
jprobe handler instead of the function. The jprobe handler must end
with jprobe_return() which swaps the stack and does an int3 (breakpoint).
This breakpoint handler will then put back the saved stack frame,
simulate the instruction at the beginning of the function it added
a breakpoint to, and then continue on.
For function tracing to work, it hijakes the return address from the
stack frame, and replaces it with a hook function that will trace
the end of the call. This hook function will restore the return
address of the function call.
If the function tracer traces the jprobe handler, the hook function
for that handler will not be called, and its saved return address
will be used for the next function. This will result in a kernel crash.
To solve this, pause function tracing before the jprobe handler is called
and unpause it before it returns back to the function it probed.
Some other updates:
Used a variable "saved_sp" to hold kcb->jprobe_saved_sp. This makes the
code look a bit cleaner and easier to understand (various tries to fix
this bug required this change).
Note, if fentry is being used, jprobes will change the ip address before
the function graph tracer runs and it will not be able to trace the
function that the jprobe is probing.
ftrace: Check both notrace and filter for old hash
Using just the filter for checking for trampolines or regs is not enough
when updating the code against the records that represent all functions.
Both the filter hash and the notrace hash need to be checked.
The trace-cmd record at the end clears the filter before it disables
function_graph tracing and then that causes the accounting of the
ftrace function records to become incorrect and causes ftrace to bug.
Link: http://lkml.kernel.org/r/20150114154329.358378039@goodmis.org Cc: stable@vger.kernel.org
[ still need to switch old_hash_ops to old_ops_hash ] Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
ftrace: Fix updating of filters for shared global_ops filters
As the set_ftrace_filter affects both the function tracer as well as the
function graph tracer, the ops that represent each have a shared
ftrace_ops_hash structure. This allows both to be updated when the filter
files are updated.
But if function graph is enabled and the global_ops (function tracing) ops
is not, then it is possible that the filter could be changed without the
update happening for the function graph ops. This will cause the changes
to not take place and may even cause a ftrace_bug to occur as it could mess
with the trampoline accounting.
The solution is to check if the ops uses the shared global_ops filter and
if the ops itself is not enabled, to check if there's another ops that is
enabled and also shares the global_ops filter. In that case, the
modification still needs to be executed.
projects / linux-beck.git / log