Mohamed Abbas [Fri, 18 Jul 2008 05:52:57 +0000 (13:52 +0800)]
iwlwifi: add power save to 5000 HW
This patch adds support for power save for 5000 HW.
Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Sven Wegener [Sun, 3 Aug 2008 21:06:44 +0000 (14:06 -0700)]
net: Add missing extra2 parameter for ip_default_ttl sysctl
Commit 76e6ebfb40a2455c18234dcb0f9df37533215461 ("netns: add namespace
parameter to rt_cache_flush") acceses the extra2 parameter of the
ip_default_ttl ctl_table, but it is never set to a meaningful
value. When e84f84f276473dcc673f360e8ff3203148bdf0e2 ("netns: place
rt_genid into struct net") is applied, we'll oops in
rt_cache_invalidate(). Set extra2 to init_net, to avoid that.
Reported-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Sven Wegener <sven.wegener@stealer.net> Tested-by: Marcin Slusarz <marcin.slusarz@gmail.com> Acked-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
net: use software GSO for SG+CSUM capable netdevices
If a netdevice does not support hardware GSO, allowing the stack to
use GSO anyway and then splitting the GSO skb into MSS-sized pieces
as it is handed to the netdevice for transmitting is likely still
a win as far as throughput and/or CPU usage are concerned, since it
reduces the number of trips through the output path.
This patch enables the use of GSO on any netdevice that supports SG.
If a GSO skb is then sent to a netdevice that supports SG but does not
support hardware GSO, net/core/dev.c:dev_hard_start_xmit() will take
care of doing the necessary GSO segmentation in software.
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
Chris Larson [Sun, 3 Aug 2008 08:10:55 +0000 (01:10 -0700)]
net: fix missing pneigh entries in the neighbor seq_file code
When pneigh entries exist, but the user's read buffer isn't sufficient to
hold them all, one of the pneigh entries will be missing from the results.
In neigh_get_idx_any, the number of elements which neigh_get_idx
encountered is not correctly subtracted from the position number before
the call to pneigh_get_idx. neigh_get_idx reduces the position by 1 for
each call to neigh_get_next, but it does not reduce it by one for the
first element (neigh_get_first). The patch alters the neigh_get_idx and
pneigh_get_idx functions to subtract one from pos, for the first element,
when pos is non-zero.
Signed-off-by: Chris Larson <clarson@mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Chris Larson [Sun, 3 Aug 2008 08:02:41 +0000 (01:02 -0700)]
net: in the first call to neigh_seq_next, call neigh_get_first, not neigh_get_idx.
neigh_seq_next won't be called both with *pos > 0 && v ==
SEQ_START_TOKEN, so there's no point calling neigh_get_idx when we're
on the start token, just call neigh_get_first directly.
Signed-off-by: Chris Larson <clarson@mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ivo van Doorn [Sat, 2 Aug 2008 08:31:09 +0000 (01:31 -0700)]
rt2x00: Fix compile warning
rt2x00usb_vendor_request_large_buff is write-only, so it is
safe to make the argument a const.
Fixes compile warning:
drivers/net/wireless/rt2x00/rt73usb.c: In function 'rt73usb_load_firmware':
drivers/net/wireless/rt2x00/rt73usb.c:916: warning: passing argument 5 of 'rt2x00usb_vendor_request_large_buff' discards qualifiers from pointer target typ
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Tim Bird [Fri, 1 Aug 2008 21:05:50 +0000 (14:05 -0700)]
embedded: fix vc_translate operator precedence
This fixes a bug in operator precedence in the newly introduced vc_translate
macro. Without this fix, the translation of some characters on the
kernel console is garbled.
This patch was copied to the e-mail list previously for testing. Now,
all reports confirm that it works, so this is an official post for
application.
Signed-off-by: Tim Bird <tim.bird@am.sony.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Steven Rostedt [Thu, 31 Jul 2008 16:40:52 +0000 (12:40 -0400)]
dual license ftrace.txt
I asked legal about the licensing of ftrace.txt, and they told me that,
unless the Documentation directory is specifically set up to handle non
GPL licenses (which it does not appear to be), then it would be best to
put ftrace.txt under the GPL.
This patch adds a dual license to ftrace.txt such that it is under both
the FDL and the GPL.
Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently function tty_ldisc_get() tries to load an ldisc driver module
only when tty_ldisc_try_get() returns -EAGAIN. This happens only if
module is being unloaded. If ldisc module is not loaded
tty_ldisc_try_get() returns -EINVAL and this case is not handled in
tty_ldisc_get(), so request_module() is not called.
Attached patch fixes this by calling request_module() if
tty_ldisc_try_get() returned any error code.
I discovered this when my UMTS modem stopped working with 2.6.27-rc1
because module ppp_async was not loaded.
Linus Torvalds [Fri, 1 Aug 2008 19:48:16 +0000 (12:48 -0700)]
Merge branch 'kvm-updates-2.6.27' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm
* 'kvm-updates-2.6.27' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm:
KVM: s390: Fix kvm on IBM System z10
KVM: Advertise synchronized mmu support to userspace
KVM: Synchronize guest physical memory map to host virtual memory map
KVM: Allow browsing memslots with mmu_lock
KVM: Allow reading aliases with mmu_lock
Some platform decide whether they support huge pages at boot time. On
these, such as powerpc, HPAGE_SHIFT is a variable, not a constant, and is
set to 0 when there is no such support.
The patches to introduce multiple huge pages support broke that causing
the kernel to crash at boot time on machines such as POWER3 which lack
support for multiple page sizes.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Yoshinori Sato [Thu, 31 Jul 2008 07:07:29 +0000 (00:07 -0700)]
Missing symbol prefix on vmlinux.lds.h
ARCH=h8300:
init/main.c:781: undefined reference to `___early_initcall_end'
Same problem have
__start___bug_table
__stop___bug_table
__tracedata_start
__tracedata_end
__per_cpu_start
__per_cpu_end
When defining a symbol in vmlinux.lds, use the VMLINUX_SYMBOL macro.
VMLINUX_SYMBOL adds a prefix charactor.
You can't just use straight symbol names in common header files as they
dont take into consideration weird arch-specific ABI conventions. in the
case of Blackfin/h8300, the ABI dictates that any C-visible symbols have
an underscore prefixed to them. Thus all symbols in vmlinux.lds.h need to
be wrapped in VMLINUX_SYMBOL() so that each arch can put hide this magic
in their own files.
[akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: "Mike Frysinger" <vapier.adi@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
PNP: fix formatting of dbg_pnp_show_resources() output
Each resource should be printed on its own line, so start snprintf'ing
at the beginning of the buffer every time through the loop.
Also, use scnprintf() rather than snprintf() when building up the
buffer to print. scnprintf() returns the number of characters actually
written into the buffer (not including the trailing NULL).
snprintf() returns the number of characters that *would be* written,
assuming everything would fit in the buffer. That's nice if we want to
resize the buffer to make sure everything fits, but in this case, I
just want to keep from overflowing the buffer, and it's OK if the
output is truncated.
Using snprintf() meant that my "len" could grow to be more than the
the buffer size, which makes "sizeof(buf) - len" negative, which causes
this alarming WARN_ON:
http://marc.info/?l=linux-kernel&m=121736480005656&w=2
More useful snprintf/scnprintf discussion:
http://lwn.net/Articles/69419/
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Reported-by: Pete Clements <clem@clem.clem-digital.net> Cc: Rene Herman <rene.herman@keyaccess.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Niels de Vos [Thu, 31 Jul 2008 07:07:23 +0000 (00:07 -0700)]
Remove newline from the description of module parameters
Some module parameters with only one line have the '\n' at the end of the
description. This is not needed nor wanted as after the description the
type (i.e. int) is followed by a newline.
Some modules contain a multi-line description, these are not affected
by this patch.
Signed-off-by: Niels de Vos <niels.devos@wincor-nixdorf.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: John W. Linville <linville@tuxdriver.com> Cc: Ed L. Cashin <ecashin@coraid.com> Cc: Dave Airlie <airlied@linux.ie> Cc: Roland Dreier <rolandd@cisco.com> Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 1 Aug 2008 19:41:29 +0000 (12:41 -0700)]
Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
pata_it821x: Driver updates and reworking
libata.h: replace __FUNCTION__ with __func__
ata_piix: subsys 106b:00a3 is apple ich8m too
libata-core: make sure that ata_force_tbl is freed in case of an error
libata: update atapi disable handling
pata_via: add VX800 flag; add function for fixing h/w bugs
pata_ali: misplaced pci_dev_put()
Linus Torvalds [Fri, 1 Aug 2008 19:39:09 +0000 (12:39 -0700)]
Merge branch 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-pull
* 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-pull: (64 commits)
[XFS] Remove vn_revalidate calls in xfs.
[XFS] Now that xfs_setattr is only used for attributes set from ->setattr
[XFS] xfs_setattr currently doesn't just handle the attributes set through
[XFS] fix use after free with external logs or real-time devices
[XFS] A bug was found in xfs_bmap_add_extent_unwritten_real(). In a
[XFS] fix compilation without CONFIG_PROC_FS
[XFS] s/XFS_PURGE_INODE/IRELE/g s/VN_HOLD(XFS_ITOV())/IHOLD()/
[XFS] fix mount option parsing in remount
[XFS] Disable queue flag test in barrier check.
[XFS] streamline init/exit path
[XFS] Fix up problem when CONFIG_XFS_POSIX_ACL is not set and yet we still
[XFS] Don't assert if trying to mount with blocksize > pagesize
[XFS] Don't update mtime on rename source
[XFS] Allow xfs_bmbt_split() to fallback to the lowspace allocator
[XFS] Restore the lowspace extent allocator algorithm
[XFS] use minleft when allocating in xfs_bmbt_split()
[XFS] attrmulti cleanup
[XFS] Check for invalid flags in xfs_attrlist_by_handle.
[XFS] Fix CI lookup in leaf-form directories
[XFS] Use the generic xattr methods.
...
Use the standard offsetof() macro to fix a compile warning below:
CC [M] drivers/net/wireless/prism54/isl_ioctl.o
drivers/net/wireless/prism54/isl_ioctl.c: In function 'prism2_ioctl_set_generic_element':
drivers/net/wireless/prism54/isl_ioctl.c:2658: warning: cast from pointer to integer of different size
Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
ipw_write8() can't be used alone with a loop because of a wrong definition.
CC [M] drivers/net/wireless/ipw2200.o
drivers/net/wireless/ipw2200.c: In function 'ipw_ethtool_set_eeprom':
drivers/net/wireless/ipw2200.c:10579: warning: array subscript is above array bounds
drivers/net/wireless/ipw2200.c: In function 'ipw_load':
drivers/net/wireless/ipw2200.c:2663: warning: array subscript is above array bounds
Add missing do {} while (0) to fix them.
Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Larry Finger [Fri, 1 Aug 2008 00:30:48 +0000 (19:30 -0500)]
rtl8187: Fix lockups due to concurrent access to config routine
Some users of the RTL8187B have experienced difficulties since commit 49292d56352a6ab90d04c3448dd8b6106dfef2d6 that introduced the power
management wext hooks. This difficulty has not made much sense until
it was realized that it was possible for mac80211 to make a call to the
config routine while that routine was already being executed. On this
device, it is necessary to loopback the TX when changing channels. Unless
this is properly restored, the device will lockup. A mutex now protects
the device state, and the private data in several places.
The problem was found by Herton Ronaldo Krzesinski <herton@mandriva.com.br>,
who also suggested this type of fix.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Acked-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Acked-by: Hin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
I believe that there is a problem with that patch --- it
(inadvertantly) removes an extra line of code, that used to set the
DATABYTE_COUNT field.
This patch reinstates that line, and with it my card works again.
Signed-off-by: Peter Chubb <peterc@gelato.unsw.edu.au> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Dan Williams [Tue, 29 Jul 2008 17:50:39 +0000 (13:50 -0400)]
libertas: only enable rtap with mesh firmware
Since only mesh-enabled firmware has the CMD_802_11_MONITOR_MODE on
which the rtap functionality depends, only expose the rtap functionality
when mesh is also available.
Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Ivo van Doorn [Mon, 28 Jul 2008 08:21:16 +0000 (10:21 +0200)]
rt2x00: Sequence counter should be protected in irqsave
The sequence counter can be accessed in IRQ context,
which means the lock protecting the counter should
be irqsave. To prevent making the entire intf->lock irqsave
without reason, create a new lock which only protects
the sequence counter.
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Ivo van Doorn [Sun, 27 Jul 2008 13:06:50 +0000 (15:06 +0200)]
rt2x00: rt61pci needs another millisecond after firmware upload
After the hardware has indicated the firmware upload has completed
and the device is ready, we should wait another millisecond to
make sure the device is really ready to continue.
Without this timout, bringing the interface down and up again will
fail due to incorrect register initialization.
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Ivo van Doorn [Sun, 27 Jul 2008 13:06:21 +0000 (15:06 +0200)]
rt2x00: Fix partial antenna configuration
The if-statement to determine the new TX/RX antenna
configuration was incomplete. It lacks the general
else-clause when the antenna wasn't changed.
This is a correct event, since it can occur when only
one of the antenna's has been changed or when the new
configuration is being forced (like when the interface
has just been added).
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Ivo van Doorn [Sun, 27 Jul 2008 13:06:05 +0000 (15:06 +0200)]
rt2x00: Fix access permissions on debugfs files
Although most rt2x00 debugfs files don't contain
information which could compromise network security,
it is better to set the access permissions to root only.
This will be required when HW crypto is implemented,
because it could be possible to read the HW key from
the registers.
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Tomas Winkler [Thu, 24 Jul 2008 18:33:42 +0000 (21:33 +0300)]
iwlwifi: don't stop queue in the middle of fragmented packet
This patch avoids stopping queue in the middle of the fragmented packet.
It is required that there will be ~10 (max packet/min fragment) or 16
(4 bits of frag number) free tfds all the time.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Mask out previously demanded interrupt flags because we set
new ones. Don't allow mixing them after switch from sta to
ibss and vice versa.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Nick Kossifidis <mickflemm@gmail.com> Cc: Luis R. Rodriguez <mcgrof@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Provide default activate function to set the state of the led
when the led becomes bound to the trigger
Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Allow the rfkill driver to specify led trigger name.
By default it still defaults to the name of rfkill switch.
Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
rfkill: query EV_SW states when rfkill-input (re)?connects to a input device
Every time a new input device that is capable of one of the
rfkill EV_SW events (currently only SW_RFKILL_ALL) is connected to
rfkill-input, we must check the states of the input EV_SW switches
and take action. Otherwise, we will ignore the initial switch state.
We also need to re-check the states of the EV_SW switches after
a device that was under an exclusive grab is released back to us,
since we got no input events from that device while it was grabbed.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Nick Kossifidis [Sun, 20 Jul 2008 03:47:12 +0000 (06:47 +0300)]
ath5k: Update phy calibration functions
* Enable I/Q calibration each time we have correction results (we
were only enabling calibration during reset). If we don't we commit
the same results each time calibration routine is called.
* Add some documentation and a TODO on nf calibration
* Return -EAGAIN on noise floor timeout/failure
Changes-licensed-under: ISC Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Nick Kossifidis [Sun, 20 Jul 2008 03:44:43 +0000 (06:44 +0300)]
ath5k: Update channel functions
* Add channel function for RF2425 (got this from decompiling binary
HAL, i have no idea why there is a 5GHz section but i'm looking
into it)
* Update RF5112 channel function (also got this from decompiling binary HAL)
* Set JAPAN setting for channel 14 on all PHY chips
Changes-licensed-under: ISC Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Nick Kossifidis [Sun, 20 Jul 2008 03:41:26 +0000 (06:41 +0300)]
ath5k: Reorder calibration calls during reset and update hw_set_power
* Update ath5k_hw_reset and add some more documentation about PHY calibration
* Fix ath5k_hw_set_power to use AR5K_SLEEP_CTL_SLE_ALLOW for Network sleep
* Preserve sleep duration field while setting AR5K_SLEEP_CTL
and reduce delays & checks for register's status (got this from
decompiling & dumps, it works for me but it needs testing)
Changes-licensed-under: ISC Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Roland McGrath [Thu, 31 Jul 2008 09:04:09 +0000 (02:04 -0700)]
tracehook: fix exit_signal=0 case
My commit 2b2a1ff64afbadac842bbc58c5166962cf4f7664 introduced a regression
(sorry about that) for the odd case of exit_signal=0 (e.g. clone_flags=0).
This is not a normal use, but it's used by a case in the glibc test suite.
Dying with exit_signal=0 sends no signal, but it's supposed to wake up a
parent's blocked wait*() calls (unlike the delayed_group_leader case).
This fixes tracehook_notify_death() and its caller to distinguish a
"signal 0" wakeup from the delayed_group_leader case (with no wakeup).
Linus Torvalds [Fri, 1 Aug 2008 18:56:07 +0000 (11:56 -0700)]
Merge branch 'for-linus' of git://neil.brown.name/md
* 'for-linus' of git://neil.brown.name/md:
md: raid10: wake up frozen array
md: do not count blocked devices as spares
md: do not progress the resync process if the stripe was blocked
md: delay notification of 'active_idle' to the recovery thread
md: fix merge error
md: move async_tx_issue_pending_all outside spin_lock_irq
Linus Torvalds [Fri, 1 Aug 2008 18:54:05 +0000 (11:54 -0700)]
Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2:
[PATCH] ocfs2: Release mutex in error handling code
[PATCH] ocfs2: Fix oops when racing files truncates with writes into an mmap region
[PATCH 2/2] ocfs2: Fix race between mount and recovery
[PATCH 1/2] ocfs2: Add counter in struct ocfs2_dinode to track journal replays
[PATCH] configfs: Convenience macros for attribute definition.
[PATCH] configfs: Pin configfs subsystems separately from new config_items.
[PATCH] configfs: Fix open directory making rmdir() fail
[PATCH] configfs: Lock new directory inodes before removing on cleanup after failure
[PATCH] configfs: Prevent userspace from creating new entries under attaching directories
[PATCH] configfs: Fix failing symlink() making rmdir() fail
[PATCH] configfs: Fix symlink() to a removing item
[PATCH] configfs: Include linux/err.h in linux/configfs.h
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes:
kbuild: scripts/ver_linux: don't set PATH
Kconfig/init: change help text to match default value
kbuild: genksyms: Include extern information in dumps
kbuild: genksyms parser: fix the __attribute__ rule
kbuild: scripts/genksyms/lex.l: add %option noinput
kconfig: scripts/kconfig/zconf.l: add %option noinput
kbuild: fix O=... build of um
Linus Torvalds [Fri, 1 Aug 2008 18:46:00 +0000 (11:46 -0700)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
md: the bitmap code needs to use blk_plug_device_unlocked()
block: add a blk_plug_device_unlocked() that grabs the queue lock
Linus Torvalds [Fri, 1 Aug 2008 18:45:09 +0000 (11:45 -0700)]
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:
kgdb: fix gdb serial thread queries
kgdb: fix kgdb_validate_break_address to perform a mem write
kgdb: remove the requirement for CONFIG_FRAME_POINTER
Linus Torvalds [Fri, 1 Aug 2008 18:44:24 +0000 (11:44 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
ALSA: ASoC: Export dapm_reg_event() fully
ALSA: ASoC: Update Poodle to current ASoC API
ALSA: asoc: restrict sample rate and size in Freescale MPC8610 sound drivers
ALSA: sound/soc/pxa/tosa.c: removed duplicated include
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (46 commits)
tcp: MD5: Fix IPv6 signatures
skbuff: add missing kernel-doc for do_not_encrypt
net/ipv4/route.c: fix build error
tcp: MD5: Fix MD5 signatures on certain ACK packets
ipv6: Fix ip6_xmit to send fragments if ipfragok is true
ipvs: Move userspace definitions to include/linux/ip_vs.h
netdev: Fix lockdep warnings in multiqueue configurations.
netfilter: xt_hashlimit: fix race between htable_destroy and htable_gc
netfilter: ipt_recent: fix race between recent_mt_destroy and proc manipulations
netfilter: nf_conntrack_tcp: decrease timeouts while data in unacknowledged
irda: replace __FUNCTION__ with __func__
nsc-ircc: default to dongle type 9 on IBM hardware
bluetooth: add quirks for a few hci_usb devices
hysdn: remove the packed attribute from PofTimStamp_tag
isdn: use the common ascii hex helpers
tg3: adapt tg3 to use reworked PCI PM code
atm: fix direct casts of pointers to u32 in the InterPhase driver
atm: fix const assignment/discard warnings in the ATM networking driver
net: use the common ascii hex helpers
random32: seeding improvement
...
Jens Axboe [Fri, 1 Aug 2008 18:31:32 +0000 (20:31 +0200)]
block: add a blk_plug_device_unlocked() that grabs the queue lock
blk_plug_device() must be called with the queue lock held, so callers
often just grab and release the lock for that purpose. Add a helper
that does just that.
Linus Torvalds [Fri, 1 Aug 2008 18:29:54 +0000 (11:29 -0700)]
Merge git://git.infradead.org/mtd-2.6
* git://git.infradead.org/mtd-2.6:
[MTD] [NAND] drivers/mtd/nand/nandsim.c: fix printk warnings
[MTD] [NAND] Blackfin NFC Driver: Cleanup the error exit path of bf5xx_nand_probe function
[MTD] [NAND] Blackfin NFC Driver: use standard dev_err() rather than printk()
[MTD] [NAND] Blackfin NFC Driver: enable Blackfin nand HWECC support by default
[MTD] [NAND] Blackfin NFC Driver: add proper devinit/devexit markings to probe/remove functions
[MTD] [NAND] Blackfin NFC Driver: add support for the ECC layout the Blackfin bootrom uses
[MTD] [NAND] Blackfin NFC Driver: fix bug - hw ecc calc by making sure we extract 11 bits from each register instead of 10
[MTD] [NAND] Blackfin NFC Driver: fix bug - do not clobber the status from the first 256 bytes if operating on 512 pages
[MTD] [NAND] diskonchip.c fix sparse endian warnings
[MTD] [NAND] drivers/mtd/nand/nandsim.c needs div64.h
[JFFS2] Fix allocation of summary buffer
Fix rename of at91_nand -> atmel_nand
[MTD] [NOR] drivers/mtd/chips/jedec_probe.c: fix Am29DL800BB device ID
[MTD] MTD_DEBUG always does compile-time typechecks
[MTD] DataFlash: bugfix, binary page sizes now handled
[MTD] [NAND] fsl_elbc_nand.c: fix printk warning
[MTD] [NAND] nandsim: support random page read command
[MTD] [NAND] fix subpage read for small page NAND
Linus Torvalds [Fri, 1 Aug 2008 18:26:51 +0000 (11:26 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
[PATCH] pass struct path * to do_add_mount()
[PATCH] switch mtd and dm-table to lookup_bdev()
[patch 3/4] vfs: remove unused nameidata argument of may_create()
[PATCH] devpts: switch to IDA
[PATCH 2/2] proc: switch inode number allocation to IDA
[PATCH 1/2] proc: fix inode number bogorithmetic
[PATCH] fix bdev leak in block_dev.c do_open()
[PATCH] fix races and leaks in vfs_quota_on() users
[PATCH] clean dup2() up a bit
[PATCH] merge locate_fd() and get_unused_fd()
[PATCH] ipv4_static_sysctl_init() should be under CONFIG_SYSCTL
Re: BUG at security/selinux/avc.c:883 (was: Re: linux-next: Tree
Linus Torvalds [Fri, 1 Aug 2008 18:23:09 +0000 (11:23 -0700)]
Merge branch 'audit.b54' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current
* 'audit.b54' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current:
[PATCH] Fix the bug of using AUDIT_STATUS_RATE_LIMIT when set fail, no error output.
[PATCH] Fix the kernel panic of audit_filter_task when key field is set
Re: [PATCH] the loginuid field should be output in all AUDIT_CONFIG_CHANGE audit messages
kernel/audit.c control character detection is off-by-one
[PATCH] Audit: Collect signal info when SIGUSR2 is sent to auditd
Linus Torvalds [Fri, 1 Aug 2008 18:22:45 +0000 (11:22 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc:
au1xmmc: raise segment size limit.
mmc_block: use proper sg iterators
mmc: properly iterate over sg list in debug check
mmc_test: Revert "mmc_test: test oversized sg lists"
sdhci: check correct return value
sdhci: disable DMA for req, not completely
sdhci: handle bug in JMB38x for sizes < 4 bytes
Linus Torvalds [Fri, 1 Aug 2008 17:55:07 +0000 (10:55 -0700)]
Merge git://git.infradead.org/battery-2.6
* git://git.infradead.org/battery-2.6:
power_supply: Sharp SL-6000 (tosa) batteries support
power_supply: fix up CHARGE_COUNTER output to be more precise
power_supply: add CHARGE_COUNTER property and olpc_battery support for it
power_supply: bump EC version check that we refuse to run with in olpc_battery
power_supply: cleanup of the OLPC battery driver
power_supply: add eeprom dump file to olpc_battery's sysfs
power_supply: Support serial number in olpc_battery
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (28 commits)
mm/hugetlb.c must #include <asm/io.h>
video: Fix up hp6xx driver build regressions.
sh: defconfig updates.
sh: Kill off stray mach-rsk7203 reference.
serial: sh-sci: Fix up SH7760/SH7780/SH7785 early printk regression.
sh: Move out individual boards without mach groups.
sh: Make sure AT_SYSINFO_EHDR is exposed to userspace in asm/auxvec.h.
sh: Allow SH-3 and SH-5 to use common headers.
sh: Provide common CPU headers, prune the SH-2 and SH-2A directories.
sh/maple: clean maple bus code
sh: More header path fixups for mach dir refactoring.
sh: Move out the solution engine headers to arch/sh/include/mach-se/
sh: I2C fix for AP325RXA and Migo-R
sh: Shuffle the board directories in to mach groups.
sh: dma-sh: Fix up dreamcast dma.h mach path.
sh: Switch KBUILD_DEFCONFIG to shx3_defconfig.
sh: Add ARCH_DEFCONFIG entries for sh and sh64.
sh: Fix compile error of Solution Engine
sh: Proper __put_user_asm() size mismatch fix.
sh: Stub in a dummy ENTRY_OFFSET for uImage offset calculation.
...
Linus Torvalds [Fri, 1 Aug 2008 17:27:10 +0000 (10:27 -0700)]
Merge branch 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6:
[S390] qeth: avoid use of include/asm-s390
[S390] dont use kthread for smp_rescan_cpus().
[S390] virtio console: fix section mismatch warning.
[S390] cio: Include linux/string.h in schid.h.
[S390] qdio: fix section mismatch bug.
[S390] stp: fix section mismatch warning.
[S390] Remove diag 0x260 call from memory detection.
[S390] qdio: make sure qdr is aligned to page size
[S390] Add support for memory hot-remove.
[S390] Wire up new syscalls.
[S390] cio: Memory allocation for idset changed.
[S390] qeth: preallocated qeth header for hiper socket
[S390] Optimize storage key operations for anon pages
[S390] nohz/sclp: disable timer on synchronous waits.
[S390] ipl: Reboot from alternate device does not work when booting from file
[S390] dasd: Add support for enhanced VM UID
[S390] Remove last P390 trace.
Tony Luck [Fri, 1 Aug 2008 17:13:32 +0000 (10:13 -0700)]
[IA64] Move include/asm-ia64 to arch/ia64/include/asm
After moving the the include files there were a few clean-ups:
1) Some files used #include <asm-ia64/xyz.h>, changed to <asm/xyz.h>
2) Some comments alerted maintainers to look at various header files to
make matching updates if certain code were to be changed. Updated these
comments to use the new include paths.
3) Some header files mentioned their own names in initial comments. Just
deleted these self references.
Pierre Ossman [Mon, 28 Jul 2008 23:05:22 +0000 (01:05 +0200)]
mmc_test: Revert "mmc_test: test oversized sg lists"
This reverts commit 48b5352ea1891455eb8e824cf7d92f66931a090f. Oversized
sg lists are not allowed anymore, and the core even checks for them in
debug mode, so this test is entirely incorrect.
[PATCH] Fix the bug of using AUDIT_STATUS_RATE_LIMIT when set fail, no error output.
When the "status_get->mask" is "AUDIT_STATUS_RATE_LIMIT || AUDIT_STATUS_BACKLOG_LIMIT".
If "audit_set_rate_limit" fails and "audit_set_backlog_limit" succeeds, the "err" value
will be greater than or equal to 0. It will miss the failure of rate set.
Signed-off-by: Zhang Xiliang <zhangxiliang@cn.fujitsu.com> Acked-by: Eric Paris <eparis@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
zhangxiliang [Fri, 1 Aug 2008 11:15:47 +0000 (19:15 +0800)]
[PATCH] Fix the kernel panic of audit_filter_task when key field is set
When calling audit_filter_task(), it calls audit_filter_rules() with audit_context is NULL.
If the key field is set, the result in audit_filter_rules() will be set to 1 and
ctx->filterkey will be set to key.
But the ctx is NULL in this condition, so kernel will panic.
Signed-off-by: Zhang Xiliang <zhangxiliang@cn.fujitsu.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
zhangxiliang [Fri, 1 Aug 2008 01:47:01 +0000 (09:47 +0800)]
Re: [PATCH] the loginuid field should be output in all AUDIT_CONFIG_CHANGE audit messages
> shouldn't these be using the "audit_get_loginuid(current)" and if we
> are going to output loginuid we also should be outputting sessionid
Thanks for your detailed explanation.
I have made a new patch for outputing "loginuid" and "sessionid" by audit_get_loginuid(current) and audit_get_sessionid(current).
If there are some deficiencies, please give me your indication.
Signed-off-by: Zhang Xiliang <zhangxiliang@cn.fujitsu.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
kernel/audit.c control character detection is off-by-one
Hello,
According to my understanding there is an off-by-one bug in the
function:
audit_string_contains_control()
in:
kernel/audit.c
Patch is included.
I do not know from how many places the function is called from, but for
example, SELinux Access Vector Cache tries to log untrusted filenames via
call path:
If audit_string_contains_control() detects control characters, then the
string is hex-encoded. But the hex=0x7f dec=127, DEL-character, is not
detected.
I guess this could have at least some minor security implications, since a
user can create a filename with 0x7f in it, causing logged filename to
possibly look different when someone reads it on the terminal.
Signed-off-by: Vesa-Matti Kari <vmkari@cc.helsinki.fi> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Eric Paris [Mon, 7 Jul 2008 14:49:45 +0000 (10:49 -0400)]
[PATCH] Audit: Collect signal info when SIGUSR2 is sent to auditd
Makes the kernel audit subsystem collect information about the sending
process when that process sends SIGUSR2 to the userspace audit daemon.
SIGUSR2 is a new interesting signal to auditd telling auditd that it
should try to start logging to disk again and the error condition which
caused it to stop logging to disk (usually out of space) has been
rectified.
Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Fri, 1 Aug 2008 08:29:18 +0000 (04:29 -0400)]
[PATCH] fix races and leaks in vfs_quota_on() users
* new helper: vfs_quota_on_path(); equivalent of vfs_quota_on() sans the
pathname resolution.
* callers of vfs_quota_on() that do their own pathname resolution and
checks based on it are switched to vfs_quota_on_path(); that way we
avoid the races.
* reiserfs leaked dentry/vfsmount references on several failure exits.
projects / linux-beck.git / log