Peter Zijlstra [Mon, 8 Mar 2010 12:51:12 +0000 (13:51 +0100)]
perf, x86: Don't reset the LBR as frequently
If we reset the LBR on each first counter, simple counter rotation which
first deschedules all counters and then reschedules the new ones will
lead to LBR reset, even though we're still in the same task context.
Reduce this by not flushing on the first counter but only flushing on
different task contexts.
Peter Zijlstra [Sat, 6 Mar 2010 17:57:38 +0000 (18:57 +0100)]
perf, x86: Deal with multiple state bits for pebs-fmt1
Its unclear if the PEBS state record will have only a single bit set, in
case it does not and accumulates bits, deal with that by only processing
each event once.
Peter Zijlstra [Sat, 6 Mar 2010 12:26:11 +0000 (13:26 +0100)]
perf, x86: Fix pebs drains
I overlooked the perf_disable()/perf_enable() calls in
intel_pmu_handle_irq(), (pointed out by Markus) so we should not
explicitly disable_all/enable_all pebs counters in the drain functions,
these are already disabled and enabling them early is confusing.
Peter Zijlstra [Mon, 8 Mar 2010 16:51:33 +0000 (17:51 +0100)]
perf, x86: Avoid double disable on throttle vs ioctl(PERF_IOC_DISABLE)
Calling ioctl(PERF_EVENT_IOC_DISABLE) on a thottled counter would result
in a double disable, cure this by using x86_pmu_{start,stop} for
throttle/unthrottle and teach x86_pmu_stop() to check ->active_mask.
Peter Zijlstra [Wed, 3 Mar 2010 16:07:40 +0000 (17:07 +0100)]
perf, x86: Clean up IA32_PERF_CAPABILITIES usage
Saner PERF_CAPABILITIES support, which also exposes pebs_trap. Use that
latter to make PEBS's use of LBR conditional since a fault-like pebs
should already report the correct IP.
( As of this writing there is no known hardware that implements
!pebs_trap )
Peter Zijlstra [Wed, 3 Mar 2010 12:12:23 +0000 (13:12 +0100)]
perf, x86: use LBR for PEBS IP+1 fixup
Use the LBR to fix up the PEBS IP+1 issue.
As said, PEBS reports the next instruction, here we use the LBR to find
the last branch and from that construct the actual IP. If the IP matches
the LBR-TO, we use LBR-FROM, otherwise we use the LBR-TO address as the
beginning of the last basic block and decode forward.
Once we find a match to the current IP, we use the previous location.
This patch introduces a new ABI element: PERF_RECORD_MISC_EXACT, which
conveys that the reported IP (PERF_SAMPLE_IP) is the exact instruction
that caused the event (barring CPU errata).
The fixup can fail due to various reasons:
1) LBR contains invalid data (quite possible)
2) part of the basic block got paged out
3) the reported IP isn't part of the basic block (see 1)
Peter Zijlstra [Wed, 3 Mar 2010 11:02:30 +0000 (12:02 +0100)]
perf, x86: Implement simple LBR support
Implement simple suport Intel Last-Branch-Record, it supports all
hardware that implements FREEZE_LBRS_ON_PMI, but does not (yet) implement
the LBR config register.
The Intel LBR is a FIFO of From,To addresses describing the last few
branches the hardware took.
This patch does not add perf interface to the LBR, but merely provides an
interface for internal use.
Peter Zijlstra [Tue, 2 Mar 2010 18:52:12 +0000 (19:52 +0100)]
perf, x86: Add PEBS infrastructure
This patch implements support for Intel Precise Event Based Sampling,
which is an alternative counter mode in which the counter triggers a
hardware assist to collect information on events. The hardware assist
takes a trap like snapshot of a subset of the machine registers.
This data is written to the Intel Debug-Store, which can be programmed
with a data threshold at which to raise a PMI.
With the PEBS hardware assist being trap like, the reported IP is always
one instruction after the actual instruction that triggered the event.
This implements a simple PEBS model that always takes a single PEBS event
at a time. This is done so that the interaction with the rest of the
system is as expected (freq adjust, period randomization, lbr,
callchains, etc.).
It adds an ABI element: perf_event_attr::precise, which indicates that we
wish to use this (constrained, but precise) mode.
Peter Zijlstra [Sat, 6 Mar 2010 12:49:56 +0000 (13:49 +0100)]
perf, x86: Properly account n_added
Make sure n_added is properly accounted so that we can rely on the value
to reflect the number of added counters. This is needed if its going to
be used for more than a boolean check.
Peter Zijlstra [Mon, 8 Mar 2010 16:51:33 +0000 (17:51 +0100)]
perf, x86: Avoid double disable on throttle vs ioctl(PERF_IOC_DISABLE)
Calling ioctl(PERF_EVENT_IOC_DISABLE) on a thottled counter would result
in a double disable, cure this by using x86_pmu_{start,stop} for
throttle/unthrottle and teach x86_pmu_stop() to check ->active_mask.
Pass the full perf_event into the x86_pmu functions so that those may
make use of more than the hw_perf_event, and while doing this, remove the
superfluous second argument.
Peter Zijlstra [Tue, 2 Mar 2010 19:16:01 +0000 (20:16 +0100)]
perf, x86: Remove superfluous arguments to x86_perf_event_set_period()
The second and third argument to x86_perf_event_set_period() are
superfluous since they are simple expressions of the first argument.
Hence remove them.
Peter Zijlstra [Sat, 6 Mar 2010 18:49:19 +0000 (19:49 +0100)]
perf: Optimize perf_disable
Currently we always call hw_perf_disable(), even if its already disabled,
this seems superflous, esp. since it cannot be made NMI safe (see further
patches).
Peter Zijlstra [Fri, 5 Mar 2010 12:01:18 +0000 (13:01 +0100)]
perf: Rework and fix the arch CPU-hotplug hooks
Remove the hw_perf_event_*() hotplug hooks in favour of per PMU hotplug
notifiers. This has the advantage of reducing the static weak interface
as well as exposing all hotplug actions to the PMU.
Use this to fix x86 hotplug usage where we did things in ONLINE which
should have been done in UP_PREPARE or STARTING.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mundt <lethal@linux-sh.org> Cc: paulus@samba.org Cc: eranian@google.com Cc: robert.richter@amd.com Cc: fweisbec@gmail.com Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
LKML-Reference: <20100305154128.736225361@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Peter Zijlstra [Wed, 3 Mar 2010 14:55:04 +0000 (15:55 +0100)]
perf: Provide generic perf_sample_data initialization
This makes it easier to extend perf_sample_data and fixes a bug on arm
and sparc, which failed to set ->raw to NULL, which can cause crashes
when combined with PERF_SAMPLE_RAW.
It also optimizes PowerPC and tracepoint, because the struct
initialization is forced to zero out the whole structure.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Jean Pihet <jpihet@mvista.com> Reviewed-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Cc: Jamie Iles <jamie.iles@picochip.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Stephane Eranian <eranian@google.com> Cc: stable@kernel.org
LKML-Reference: <20100304140100.315416040@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (62 commits)
msi-laptop: depends on RFKILL
msi-laptop: Detect 3G device exists by standard ec command
msi-laptop: Add resume method for set the SCM load again
msi-laptop: Support some MSI 3G netbook that is need load SCM
msi-laptop: Add threeg sysfs file for support query 3G state by standard 66/62 ec command
msi-laptop: Support standard ec 66/62 command on MSI notebook and nebook
Driver core: create lock/unlock functions for struct device
sysfs: fix for thinko with sysfs_bin_attr_init()
sysfs: Kill unused sysfs_sb variable.
sysfs: Pass super_block to sysfs_get_inode
driver core: Use sysfs_rename_link in device_rename
sysfs: Implement sysfs_rename_link
sysfs: Pack sysfs_dirent more tightly.
sysfs: Serialize updates to the vfs inode
sysfs: windfarm: init sysfs attributes
sysfs: Use sysfs_attr_init and sysfs_bin_attr_init on module dynamic attributes
sysfs: Document sysfs_attr_init and sysfs_bin_attr_init
sysfs: Use sysfs_attr_init and sysfs_bin_attr_init on dynamic attributes
sysfs: Use one lockdep class per sysfs attribute.
sysfs: Only take active references on attributes.
...
Linus Torvalds [Mon, 8 Mar 2010 15:34:26 +0000 (07:34 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (26 commits)
ALSA: hdmi - show debug message on changing audio infoframe
ALSA: hdmi - merge common code for intelhdmi and nvhdmi
ALSA: hda - Add ASRock mobo to MSI blacklist
ALSA: hda: uninitialized variable fix
ALSA: hda: Use LPIB for a Biostar Microtech board
ALSA: usb/audio.h: Fix field order
ALSA: fix jazz16 compile (udelay)
ALSA: hda: Use LPIB for Dell Latitude 131L
ALSA: hda - Build hda_eld into snd-hda-codec module
ALSA: hda - Support NVIDIA MCP89 and GT21x hdmi audio
ALSA: hda - Support max codecs to 8 for nvidia hda controller
ALSA: riptide: clean up while loop
ALSA: usbaudio - remove debug "SAMPLE BYTES" printk line
ALSA: timer - pass real event in snd_timer_notify1() to instance callback
ALSA: oxygen: change || to &&
ALSA: opti92x: use PnP data to select Master Control port
ASoC: fix ak4104 register array access
ASoC: soc_pcm_open: Add missing bailout tag
ALSA: usbaudio: Fix wrong bitrate for Creative Creative VF0470 Live Cam
ALSA: ua101: removing debugging code
...
Linus Torvalds [Mon, 8 Mar 2010 15:33:46 +0000 (07:33 -0800)]
Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
[S390] smsgiucv_app: deliver z/VM CP special messages (SMSG) as uevents
[S390] smsgiucv: declare char pointers as "const"
[S390] dasd: automatic recognition of read-only devices
[S390] remove unused qdio flags in zfcp and qeth
[S390] Cleanup xtime usage
[S390] qdio: add missing bracket
[S390] cio: fix init_count in case of recognition after steal lock
[S390] dasd: security and PSF update patch for EMC CKD ioctl
[S390] hvc_iucv: allocate memory buffers for IUCV in zone DMA
[S390] uaccess: make sure copy_from_user_overflow is builtin
[S390] smsgiucv_app: deliver z/VM CP special messages (SMSG) as uevents
The smsgiucv_app driver registers a callback with the smsgiucv driver
to receive z/VM CP special messages (SMSG) starting with "APP".
When the callback is called for special messages, the driver creates
an uevent for the received message. The uevent consists of additional
environment data containing the message prefix ("APP"), message sender,
and message content.
udev rules can be used to trigger application specific actions through
matching the content or sender of the special message.
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
[S390] dasd: automatic recognition of read-only devices
In z/VM it is possible to attach a device as read-only. To prevent
unintentional write requests and subsequent I/O errors, we can detect
this configuration using the z/VM DIAG 210 interface and set the
respective linux block device to read-only as well.
Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Ursula Braun [Mon, 8 Mar 2010 11:25:20 +0000 (12:25 +0100)]
[S390] remove unused qdio flags in zfcp and qeth
zfcp and qeth are setting flags for the qdio-layer, but these flags
are not used in qdio. Patch removes the flag definitions from qdio
and their settings in zfcp and qeth.
Cc: Jan Glauber <jang@linux.vnet.ibm.com> Cc: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Before you can read or write from the i6300esb memeory mapped registers,
you need to unlock these. This is done by writing the magic numbers 0x80
and 0x86 to the reload register. The size of the reload register is 32bit
though.
Wu Fengguang [Mon, 8 Mar 2010 02:44:23 +0000 (10:44 +0800)]
ALSA: hdmi - merge common code for intelhdmi and nvhdmi
Create patch_hdmi.c to hold common code from intelhdmi and nvhdmi.
For now the patch_hdmi.c file is simply included by patch_intelhdmi.c
and patch_nvhdmi.c, and does not represent a real codec.
There are no behavior changes to intelhdmi. However nvhdmi made several
changes when copying code out of intelhdmi, which are all reverted in
this patch. Wei Ni confirmed that the reverted code actually works fine.
Randy Dunlap [Wed, 3 Feb 2010 22:24:28 +0000 (14:24 -0800)]
msi-laptop: depends on RFKILL
msi-laptop uses rfkill*() interfaces so it should depend on RFKILL.
msi-laptop.c:(.text+0x1fcd1b): undefined reference to `rfkill_alloc'
msi-laptop.c:(.text+0x1fcd76): undefined reference to `rfkill_register'
msi-laptop.c:(.text+0x1fcdc8): undefined reference to `rfkill_destroy'
msi-laptop.c:(.text+0x1fcdd9): undefined reference to `rfkill_unregister'
This repairs "msi-laptop: Detect 3G device exists by standard ec command",
which is in some gregkh tree.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Lennart Poettering <mzxreary@0pointer.de> Cc: Lee, Chun-Yi <jlee@novell.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Lee, Chun-Yi [Wed, 27 Jan 2010 04:23:00 +0000 (12:23 +0800)]
msi-laptop: Detect 3G device exists by standard ec command
Detect 3G device exists by standard ec command. Driver will not create the threeg sysfs
file and threeg rfkill interface if there have no internal 3G device in MSI notebook/netbook.
Lee, Chun-Yi [Tue, 26 Jan 2010 16:13:45 +0000 (00:13 +0800)]
msi-laptop: Add resume method for set the SCM load again
Implement the resume method for set the load SCM flag after system reusme.
Without this patch, the wifi function key on SCM model will back to BIOS
control mode then confuse with the userland software control.
e.g. MSI N034
Lee, Chun-Yi [Thu, 21 Jan 2010 16:15:59 +0000 (00:15 +0800)]
msi-laptop: Support some MSI 3G netbook that is need load SCM
Some MSI 3G netbook only have one fn key to control Wlan/Bluetooth/3G,
those netbook will load the SCM (windows app) to disable the original
Wlan/Bluetooth control by BIOS when user press fn key, then control
Wlan/Bluetooth/3G by SCM (software control by OS). Without SCM, user
cann't on/off 3G module on those 3G netbook.
On Linux, msi-laptop driver will do the same thing to disable the
original BIOS control, then might need use HAL or other userland
application to do the software control that simulate with SCM.
e.g. MSI N034 netbook
Lee, Chun-Yi [Sat, 9 Jan 2010 13:16:52 +0000 (21:16 +0800)]
msi-laptop: Support standard ec 66/62 command on MSI notebook and nebook
Suppport standard ec 66/62 command on MSI notebook and nebook. MSI
netbook and notebook already support 66/62 command, so, add new
get_state function, and put the old model to non-standard model, but
driver still support those old model.
Driver core: create lock/unlock functions for struct device
In the future, we are going to be changing the lock type for struct
device (once we get the lockdep infrastructure properly worked out) To
make that changeover easier, and to possibly burry the lock in a
different part of struct device, let's create some functions to lock and
unlock a device so that no out-of-core code needs to be changed in the
future.
This patch creates the device_lock/unlock/trylock() functions, and
converts all in-tree users to them.
Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jean Delvare <khali@linux-fr.org> Cc: Dave Young <hidave.darkstar@gmail.com> Cc: Ming Lei <tom.leiming@gmail.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Phil Carmody <ext-phil.2.carmody@nokia.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Pavel Machek <pavel@ucw.cz> Cc: Len Brown <len.brown@intel.com> Cc: Magnus Damm <damm@igel.co.jp> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Vegard Nossum <vegard.nossum@gmail.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Alex Chiang <achiang@hp.com> Cc: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andrew Patterson <andrew.patterson@hp.com> Cc: Yu Zhao <yu.zhao@intel.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Wolfram Sang <w.sang@pengutronix.de> Cc: CHENG Renquan <rqcheng@smu.edu.sg> Cc: Oliver Neukum <oliver@neukum.org> Cc: Frans Pop <elendil@planet.nl> Cc: David Vrabel <david.vrabel@csr.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
After merging the final tree, today's linux-next build (powerpc
allyesconfig) failed like this:
drivers/pci/pci-sysfs.c: In function 'pci_create_legacy_files':
drivers/pci/pci-sysfs.c:645: error: lvalue required as unary '&' operand
drivers/pci/pci-sysfs.c:658: error: lvalue required as unary '&' operand
Caused by commit "sysfs: Use sysfs_attr_init and sysfs_bin_attr_init on
dynamic attributes" interacting with commit "sysfs: Use one lockdep
class per sysfs attribute") both from the driver-core tree.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Because of rename ordering problems we occassionally give false
warnings about invalid sysfs operations. So using sysfs_rename
create a sysfs_rename_link function that doesn't need strange
workarounds.
Cc: Benjamin Thery <benjamin.thery@bull.net> Cc: Daniel Lezcano <dlezcano@fr.ibm.com> Acked-by: Serge Hallyn <serue@us.ibm.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Placing the 16bit s_mode between a pointer and a long doesn't pack well
especailly on 64bit where we wast 48 bits. So move s_mode and
declare it as a unsigned short. This is the sysfs backing store
after all we don't need fields extra large just in case someday
we want userspace to be able to use a larger value.
Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The vfs depends upon filesystem methods to update the
vfs inode. Sysfs adds to the normal number of places
where the vfs inode is updated by also updatng the
vfs inode in sysfs_refresh_inode.
Typically the inode mutex is used to serialize updates
to the vfs inode, but grabbing the inode mutex in
sysfs_permission and sysfs_getattr causes deadlocks,
because sometimes the vfs calls those operations with
the inode mutex held. Therefore sysfs can not use the
inode mutex to serial updates to the vfs inode.
The sysfs_mutex is acquired in all of the routines
where sysfs updates the vfs inode, and with a small
change we can consistently protext sysfs vfs inode
updates with the sysfs_mutex. To protect the sysfs
vfs inode updates with the sysfs_mutex simply requires
extending the scope of sysfs_mutex in sysfs_setattr
over inode_setattr, and over inode_change_ok (so we
have an unchanging inode when we perform the check).
Acked-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
sysfs: Document sysfs_attr_init and sysfs_bin_attr_init
I have added a new requirement to the external sysfs interface
that dynamically allocated sysfs attributes must call sysfs_attr_init
if lockdep is enabled. For the time being callying sysfs_attr_init
is only mandatory if lockdep is enabled, so we can live with a few
unconverted instances until we find them all. As this is part of
the public interface of sysfs it is a good idea to document these
pseudo functions so someone inspeciting the code can find out
what has happened.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
sysfs: Use sysfs_attr_init and sysfs_bin_attr_init on dynamic attributes
These are the non-static sysfs attributes that exist on
my test machine. Fix them to use sysfs_attr_init or
sysfs_bin_attr_init as appropriate. It simply requires
making a sysfs attribute present to see this. So this
is a little bit tedious but otherwise not too bad.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: WANG Cong <xiyou.wangcong@gmail.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Acknowledge that the logical sysfs rwsem has one instance per
sysfs attribute with different locking depencencies for different
attributes.
There is a sysfs idiom where writing to one sysfs file causes the
addition or removal of other sysfs files. Lumping all of the
sysfs attributes together in one lock class causes lockdep to
generate lots of false positives.
This introduces the requirement that non-static sysfs attributes
need to be initialized with sysfs_attr_init or sysfs_bin_attr_init.
Strictly speaking this requirement only exists when lockdep is
enabled, and when lockdep is enabled we get a bit fat warning
if this requirement is not met.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: WANG Cong <xiyou.wangcong@gmail.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
If we exclude directories and symlinks from the set of sysfs
dirents where we need active references we are left with
sysfs attributes (binary or not).
- Tweak sysfs_deactivate to only do something on attributes
- Move lockdep initialization into sysfs_file_add_mode to
limit it to just attributes.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: WANG Cong <xiyou.wangcong@gmail.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It turns out that holding an active reference on a directory is
pointless. The purpose of the active references are to allows us to
block when removing sysfs entries that have custom methods so we don't
remove modules while running modular code and to keep those custom
methods from accessing data structures after the files have been
removed. Further sysfs_remove_dir remove all elements in the
directory before removing the directory itself, so there is no chance
we will remove a directory with active children.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Hans J. Koch [Wed, 10 Feb 2010 19:12:42 +0000 (20:12 +0100)]
UIO: Remove SMX Cryptengine driver
Ben Nizette, the author of this driver, told me in a private mail that this
project has been cancelled. He suggested to remove the driver for now, and
will come back with a new version should the hardware really exist.
This patch completely removes the driver.
Signed-off-by: Hans J. Koch <hjk@linutronix.de> Acked-by: Ben Nizette <bn@niasdigital.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
John Ogness [Thu, 11 Feb 2010 14:38:53 +0000 (15:38 +0100)]
UIO: minor Kconfig fixes
Two trivial fixes for the Userspace IO Kconfig file:
1) uio_sercos3 is a PCI driver, so let it depend on PCI.
2) "default n" under UIO_PCI_GENERIC is luxury since it is already the default.
Acked-by: John Ogness <john.ogness@linutronix.de> Signed-off-by: Hans J. Koch <hjk@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Hans J. Koch [Tue, 9 Feb 2010 19:13:49 +0000 (20:13 +0100)]
UIO: Add a driver for Hilscher netX-based fieldbus cards
This patch adds a Userspace IO driver for netX-based fieldbus cards by
Hilscher (see http://www.hilscher.com). ATM, cifX and comX cards are
supported. The userspace part for this driver is provided by Hilscher
and should come with the card.
The driver is in use for several months now and has been tested by
people at Hilscher and Linutronix.
Signed-off-by: Hans J. Koch <hjk@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
auxdisplay: move cfag12864bfb's probe function to .devinit.text
A pointer to cfag12864bfb_probe is passed to the core via
platform_driver_register and so the function must not disappear when the
.init sections are discarded. Otherwise (if also having HOTPLUG=y)
unbinding and binding a device to the driver via sysfs will result in an
oops as does a device being registered late.
An alternative to this patch is using platform_driver_probe instead of
platform_driver_register plus removing the pointer to the probe function
from the struct platform_driver.
media: move omap24xxcam's probe function to .devinit.text
A pointer to omap24xxcam_probe is passed to the core via
platform_driver_register and so the function must not disappear when the
.init sections are discarded. Otherwise (if also having HOTPLUG=y)
unbinding and binding a device to the driver via sysfs will result in an
oops as does a device being registered late.
An alternative to this patch is using platform_driver_probe instead of
platform_driver_register plus removing the pointer to the probe function
from the struct platform_driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com> Acked-by: Trilok Soni <soni.trilok@gmail.com> Cc: Hans Verkuil <hverkuil@xs4all.nl> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
w1: move omap_hdq's probe function to .devinit.text
A pointer to omap_hdq_probe is passed to the core via
platform_driver_register and so the function must not disappear when the
.init sections are discarded. Otherwise (if also having HOTPLUG=y)
unbinding and binding a device to the driver via sysfs will result in an
oops as does a device being registered late.
An alternative to this patch is using platform_driver_probe instead of
platform_driver_register plus removing the pointer to the probe function
from the struct platform_driver.
i2c: move i2c_omap's probe function to .devinit.text
A pointer to omap_i2c_probe is passed to the core via
platform_driver_register and so the function must not disappear when the
.init sections are discarded. Otherwise (if also having HOTPLUG=y)
unbinding and binding a device to the driver via sysfs will result in an
oops as does a device being registered late.
An alternative to this patch is using platform_driver_probe instead of
platform_driver_register plus removing the pointer to the probe function
from the struct platform_driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Kalle Jokiniemi <ext-kalle.jokiniemi@nokia.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Richard Woodruff <r-woodruff2@ti.com> Cc: chandra shekhar <x0044955@ti.com> Cc: Jason P Marini <jason.marini@gmail.com> Cc: Syed Mohammed Khasim <x0khasim@ti.com> Cc: Jarkko Nikula <jarkko.nikula@nokia.com> Cc: Juha Yrjola <juha.yrjola@solidboot.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
x86: move hp-wmi's probe function to .devinit.text
A pointer to hp_wmi_bios_setup is passed to the core via
platform_driver_register and so the function must not disappear when the
.init sections are discarded. Otherwise (if also having HOTPLUG=y)
unbinding and binding a device to the driver via sysfs will result in an
oops as does a device being registered late.
An alternative to this patch is using platform_driver_probe instead of
platform_driver_register plus removing the pointer to the probe function
from the struct platform_driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Frans Pop <elendil@planet.nl> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: Len Brown <lenb@kernel.org> Cc: Helge Deller <deller@gmx.de> Cc: Andrew Morton <akpm@linux-foundation.org> Acked-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
platform-drivers: move probe to .devinit.text in drivers/video
A pointer to a probe callback is passed to the core via
platform_driver_register and so the function must not disappear when the
.init sections are discarded. Otherwise (if also having HOTPLUG=y)
unbinding and binding a device to the driver via sysfs will result in an
oops as does a device being registered late.
An alternative to this patch is using platform_driver_probe instead of
platform_driver_register plus removing the pointer to the probe function
from the struct platform_driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Adrian Bunk <bunk@stusta.de> Cc: Alberto Mardegan <mardy@users.sourceforge.net> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andriy Skulysh <askulysh@gmail.com> Cc: Antonino Daplas <adaplas@gmail.com> Cc: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Chandramouli Narayanan <mouli@linux.intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Frans Pop <elendil@planet.nl> Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Helge Deller <deller@gmx.de> Cc: Huang Ying <ying.huang@intel.com> Cc: Ian Molton <spyro@f2s.com> Cc: Joshua Kinard <kumba@gentoo.org> Cc: Kaj-Michael Lang <milang@tal.org> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: linux-fbdev-devel@lists.sourceforge.net Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: Magnus Damm <damm@igel.co.jp> Cc: Martin Michlmayr <tbm@cyrius.com> Cc: Matthias Kaehlcke <matthias@kaehlcke.net> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Pavel Machek <pavel@suse.cz> Cc: Philipp Zabel <philipp.zabel@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Roel Kluin <roel.kluin@gmail.com> Cc: Roland Stigge <stigge@antcom.de> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Vincent Sanders <vince@simtec.co.uk> Cc: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Arnaud Patard <arnaud.patard@rtp-net.org> Acked-by: James Simmons <jsimmons@infradead.org> Acked-by: Peter Jones <pjones@redhat.com> Acked-by: Jaya Kumar <jayakumar.lkml@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
platform-drivers: move probe to .devinit.text in drivers/scsi
A pointer to a probe callback is passed to the core via
platform_driver_register and so the function must not disappear when the
.init sections are discarded. Otherwise (if also having HOTPLUG=y)
unbinding and binding a device to the driver via sysfs will result in an
oops as does a device being registered late.
An alternative to this patch is using platform_driver_probe instead of
platform_driver_register plus removing the pointer to the probe function
from the struct platform_driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Dmitri Vorobiev <dmitri.vorobiev@movial.fi> Cc: Henrik Kretzschmar <henne@nachtwindheim.de> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: peter fuerst <post@pfrst.de> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
platform-drivers: move probe to .devinit.text in arch/arm
A pointer to a probe callback is passed to the core via
platform_driver_register and so the function must not disappear when the
.init sections are discarded. Otherwise (if also having HOTPLUG=y)
unbinding and binding a device to the driver via sysfs will result in an
oops as does a device being registered late.
An alternative to this patch is using platform_driver_probe instead of
platform_driver_register plus removing the pointer to the probe function
from the struct platform_driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Dmitry Baryshkov <dbaryshkov@gmail.com> Cc: Eric Miao <eric.miao@marvell.com> Cc: Liam Girdwood <liam.girdwood@wolfsonmicro.com> Cc: Paul Sokolovsky <pmiscml@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Arnaud Patard <arnaud.patard@rtp-net.org> Acked-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Acked-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
projects / linux-beck.git / log