Lokesh Vutla [Fri, 10 Jun 2016 04:05:42 +0000 (09:35 +0530)]
board: am57xx: Rename TARGET_BEAGLE_X15 as TARGET_AM57XX_EVM
board/am57xx supports all boards based on am57xx. Rename the taget
as TARGET_AM57XX_EVM.
Fixes: 74cc8b097d9af ("board: ti: beagle_x15: Rename to indicate support for TI am57xx evms") Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Eddy Petrișor [Sun, 5 Jun 2016 00:43:00 +0000 (03:43 +0300)]
armv8: s32v234: Introduce basic support for s32v234evb
Add initial support for NXP's S32V234 SoC and S32V234EVB board.
The S32V230 family is designed to support computation-intensive applications
for image processing. The S32V234, as part of the S32V230 family, is a
high-performance automotive processor designed to support safe
computation-intensive applications in the area of vision and sensor fusion.
The Linflex module is integrated on some NXP automotive SoCs part of the former
Freescale portfolio, like S32V234, an SoC for Advanced Driver Assistance
Systems.
Alexey Brodkin [Wed, 8 Jun 2016 05:24:54 +0000 (08:24 +0300)]
arc: Update data accessors with use of memory barriers
Memory barriers are proven to be a requirement for both compiler and
real hardware to properly serialize access to critical data.
For example if CPU or data bus it uses may do reordering of data
accesses absence of memory barriers might easily lead to very subtle and
hard to debug data corruptions.
This implementation was heavily borrowed from up to date Linux kernel.
Alexey Brodkin [Wed, 8 Jun 2016 05:19:33 +0000 (08:19 +0300)]
board: axs10x: Flush entire cache after programming reset vector
Now when we have support of IOC (IO-Coherency block) cahce operations
on regions are tuned to not be dummy stubs if IOC was found and enabled
in the core. That makes flush_dcache_range() useless for our purposes
here. And since we do need to flush modified reset vector to at least L2
cache (AKA SLC) so other cores will see it via its L1 instruction cache
we're using always functional flush_dcache_all() here.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Marek Vasut <marex@denx.de>
Alexey Brodkin [Wed, 8 Jun 2016 05:04:03 +0000 (08:04 +0300)]
arc/cache: Flush & invalidate all caches right before enabling IOC
According to ARC HS databook it is required to flush and disable
caches prior programming IOC registers. Otherwise ongoing coherent
memory operations may not observe the coherency protocols as
expected.
But since in ARC HS v2.1 there's no way to disable SLC (AKA L2 cache)
we're doing our best flushing and invalidating it.
Alexey Brodkin [Wed, 8 Jun 2016 04:57:19 +0000 (07:57 +0300)]
arc/cache: really do invalidate_dcache_all() even if IOC exists
invalidate_dcache_all() could be used in different use-cases
and what is especially important most of those cases won't be
related to DMAed data to or from peripherals, i.e. we'll be doing
invalidation of data used purely by CPU cores.
Given that IOC engine only snoops data that goes through DMA
we need to care ourselves about data used only by CPU cores
and so remove dependency on IOC from invalidate_dcache_all()
and always do real invalidation.
Marcin Niestroj [Tue, 24 May 2016 12:59:55 +0000 (14:59 +0200)]
common: env_ubi: Clear environment buffer before reading
In case we have restarted u-boot there is a chance that environment
buffer contains old environment (from the previous boot). If UBI volume
is zero size, ubi_volume_read() doesn't modify the buffer and exits
successfully.
We need to clear buffer manually before reading it from UBI, so the
invalid CRC will cause setting default environment in case that the UBI
volume is zero size.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Masahiro Yamada [Sat, 11 Jun 2016 09:44:10 +0000 (18:44 +0900)]
tools: fix define2mk.sed to not add quotes around negative integers
The sed script, tools/scripts/define2mk.sed, converts config defines
from C headers into include/autoconf.mk for the use in Makefiles.
I found the tool adds quotes around negative integer values.
For example, at the point of the v2016.07-rc1 tag,
include/configs/microblaze-generic.h defines
#define CONFIG_BOOTDELAY -1 /* -1 disables auto-boot */
Because it is an integer option, it should be converted to:
CONFIG_BOOTDELAY=-1
But, the script actually converts it to:
CONFIG_BOOTDELAY="-1"
This is a fatal problem for the tools/moveconfig.py because it parses
include/autoconf.mk for the config defines from the board headers.
CONFIG_BOOTDELAY="-1" is considered as a string type option and it
is dropped due to the type mismatch from the entry in Kconfig.
This commit fixes the script so that the tools/moveconfig.py can
correctly convert integer options with a negative value.
Joe Hershberger [Fri, 10 Jun 2016 19:53:32 +0000 (14:53 -0500)]
tools: moveconfig: Add a new --git-ref option
This option allows the 'make autoconf.mk' step to run against a former
repo state, while the savedefconfig step runs against the current repo
state. This is convenient for the case where something in the Kconfig
has changed such that the defconfig is no longer complete with the new
Kconfigs. This feature allows the .config to be built assuming those old
Kconfigs, but then savedefconfig based on the new state of the Kconfigs.
If in doubt, always specify this switch. It will always do the right
thing even if not required, but if it was required and you don't use it,
the moved configs will be incorrect. When not using this switch, you
must very carefully evaluate that all moved configs are correct.
Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Thu, 19 May 2016 06:52:09 +0000 (15:52 +0900)]
tools: moveconfig: allow to run without any CONFIG specified
I found "tools/moveconfig -s" might be useful for defconfig re-sync.
I could optimize it for re-sync if I wanted, but I do not want to
make the code complex for this feature.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
Masahiro Yamada [Thu, 19 May 2016 06:52:08 +0000 (15:52 +0900)]
tools: moveconfig: add --force-sync option
Now, this tools invokes "make savedefconfig" only when it needs to
do so, but there might be cases where a user wants the tool to do
savedefconfig forcibly, for example, some defconfigs were already
out of sync and the user wants to fix it as well.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
Masahiro Yamada [Thu, 19 May 2016 06:52:07 +0000 (15:52 +0900)]
tools: moveconfig: report when defconfig is updated
There are various factors that determine if the given defconfig is
updated, and it is probably what users are more interested in.
Show the log when the defconfig is updated. Also, copy the file
only when the file content was really updated to avoid changing
the time stamp needlessly.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
Masahiro Yamada [Thu, 19 May 2016 06:52:06 +0000 (15:52 +0900)]
tools: moveconfig: report when CONFIGs are removed by savedefconfig
This is a rare case, but there is still possibility that some CONFIG
is moved to the .config, but it is removed by "make savedefconfig".
(For example, it happens when the specified CONFIG has no prompt in
the Kconfig entry, i.e. it is not user-configurable.)
It might be an unexpected case. So, display the log in this case
(in yellow color to gain user's attention if --color option is given).
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
Masahiro Yamada [Thu, 19 May 2016 06:52:04 +0000 (15:52 +0900)]
tools: moveconfig: skip savedefconfig if .config was not updated
If no CONFIG option is moved to the .config, no need to sync the
defconfig file. This accelerates the processing by skipping
needless "make savedefconfig".
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
When we move multiple CONFIGs at the same time, we see as many
<defconfig_name> strings as actions for every defconfig, which is
redundant information.
Moreover, since normal log and error log are displayed separately,
Messages from different threads could be mixed, like this:
This commit makes sure to call "print" once a defconfig, which
enables atomic logging for each defconfig. It also makes it
possible to refactor the log format as follows:
<foo_defconfig>
<action1>
<action2>
<error_log>
<bar_defconfig>
<action1>
<action2>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
Masahiro Yamada [Thu, 19 May 2016 06:52:00 +0000 (15:52 +0900)]
tools: moveconfig: compute file paths just once
The paths to .config, include/autoconf.mk, include/config/auto.conf
are not changed during the defconfig walk. Compute them only once
when a new class instance is created.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
Masahiro Yamada [Thu, 19 May 2016 06:51:58 +0000 (15:51 +0900)]
tools: moveconfig: allow to give CONFIG names as argument directly
We still pass the input file with CONFIG name, type, default value
in each line, but the last two fields are just ignored by the tool.
So, let's deprecate the input file and allow users to give CONFIG
names directly from the command line. The types and default values
are automatically detected and handled nicely by the tool.
Going forward, we can use this tool more easily like:
tools/moveconfig.py CONFIG_FOO CONFIG_BAR
Update the documentation and fix some typos I noticed while I was
working on.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
Masahiro Yamada [Thu, 19 May 2016 06:51:56 +0000 (15:51 +0900)]
tools: moveconfig: do not rely on type and default value given by users
Commit 96464badc794 ("moveconfig: Always run savedefconfig on the
moved config") changed the work flow of this tool a lot from the
original intention when this tool was designed first.
Since then, before running this tool, users must edit the Kconfig to
add the menu entries for the configs they are moving. It means users
had already specified the type and the default value for each CONFIG
via its Kconfig entry. Nevertheless, users are still required to
dictate the same type and the default value in the input file. This
is tedious to use. So, my idea here is to deprecate the latter.
Before moving forward with it, there is one issue worth mentioning;
since the savedefconfig re-sync was introduced, this tool has not
been able to move bool options with "default y". Joe sent a patch
to solve this problem about a year ago, but it was not applied for
some reasons. Now, he came back with an updated patch, so this
problem will be fixed soon.
For other use cases, I see no reason to require redundant dictation
in the input file. Instead, the tool can know the types and default
values by parsing the .config file.
This commit changes the tool to use the CONFIG names, but ignore the
types and default values given by the input file.
This commit also fixes one bug. Prior to this commit, it could not
move an integer-typed CONFIG with value 1.
For example, assume we are moving CONFIG_CONS_INDEX. Please note
this is an integer type option.
Many board headers define this CONFIG as 1.
#define CONFIG_CONS_INDEX 1
It will be converted to
CONFIG_CONS_INDEX=y
and moved to include/autoconf.mk, by the tools/scripts/define2mk.sed.
It will cause "make savedefconfig" to fail due to the type conflict.
This commit takes care of it by detecting the type and converting the
CONFIG value correctly.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
Masahiro Yamada [Thu, 19 May 2016 06:51:54 +0000 (15:51 +0900)]
tools: moveconfig: exit with error message for not clean directory
When the source tree is not clean, this tool raises an exception
with a message like follows:
Traceback (most recent call last):
File "tools/moveconfig.py", line 939, in <module>
main()
File "tools/moveconfig.py", line 934, in main
move_config(config_attrs, options)
File "tools/moveconfig.py", line 808, in move_config
while not slots.available():
File "tools/moveconfig.py", line 733, in available
if slot.poll():
File "tools/moveconfig.py", line 645, in poll
self.parser.update_dotconfig(self.defconfig)
File "tools/moveconfig.py", line 503, in update_dotconfig
with open(autoconf_path) as f:
IOError: [Errno 2] No such file or directory: '/tmp/tmpDtzCgl/include/autoconf.mk'
This does not explain what is wrong. Show an appropriate error
message "source tree is not clean, please run 'make mrproper'"
in such a situation.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
Masahiro Yamada [Thu, 19 May 2016 06:51:53 +0000 (15:51 +0900)]
tools: moveconfig: check compilers before starting defconfig walk
Since commit 25400090b1e2 ("moveconfig: Print a message for
missing compiler"), this tool parses an error message every time an
error occurs during the process in order to detect missing compiler.
Instead of that, we can look for compilers in the PATH environment
only once before starting the defconfig walk. If a desired compiler
is missing, "make include/config/auto.conf" will apparently fail for
that architecture. So, the tool can just skip those board, showing
"Compiler is missing. Do nothing.".
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
Masahiro Yamada [Thu, 19 May 2016 06:51:52 +0000 (15:51 +0900)]
tools: moveconfig: check directory location before compilers
We must ensure this tool is run from the top of source directory
before calling update_cross_compile(). Otherwise, the following
exception is thrown:
Traceback (most recent call last):
File "./moveconfig.py", line 918, in <module>
main()
File "./moveconfig.py", line 908, in main
update_cross_compile()
File "./moveconfig.py", line 292, in update_cross_compile
for arch in os.listdir('arch'):
OSError: [Errno 2] No such file or directory: 'arch'
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
Masahiro Yamada [Thu, 19 May 2016 06:51:50 +0000 (15:51 +0900)]
tools: moveconfig: rename update_defconfig() to update_dotconfig()
Commit 96464badc794 ("moveconfig: Always run savedefconfig on the
moved config") changed how defconfig files were updated.
Since then, the function update_defconfig() does not modify defconfig
files at all (instead, they are updated by "make savedefconfig"), so
update_dotconfig() is a better fit for this function. Also, update
the comment block to match the actual behavior.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
Masahiro Yamada [Thu, 19 May 2016 06:51:49 +0000 (15:51 +0900)]
tools: moveconfig: fix --dry-run option
Since commit 96464badc794 ("moveconfig: Always run savedefconfig on
the moved config"), --dry-run option is broken.
The --dry-run option prevents the .config from being modified,
but defconfig files might be updated by "make savedefconfig"
regardless of the --dry-run option.
Move the "if not self.options.dry_run" conditional to the correct
place.
Fixes 96464badc794 ("moveconfig: Always run savedefconfig on the moved config") Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
Extend the boot device autodetection from SAMA5D2 only to the entire
SAMA5Dx family of microcontrollers.
Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andreas Bießmann <andreas.devel@googlemail.com> Cc: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Andreas Bießmann <andreas@biessmann.org>
[minor compile fix for SAMA5D2] Signed-off-by: Andreas Bießmann <andreas@biessmann.org>
Andre Renaud [Thu, 5 May 2016 13:28:22 +0000 (07:28 -0600)]
arm: at91: Add support for gurnard
This board is based on Snapper 9G45 which has an Atmel AT91SAM9G45 chip and
128MB of SDRAM. It includes a small LCD, 2xUSB host, SD card, Ethernet and
two UARTs.
Signed-off-by: Andre Renaud <andre@designa-electronics.com> Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andreas Bießmann <andreas@biessmann.org>
[apply CONFIG_BOOTDELAY transition] Signed-off-by: Andreas Bießmann <andreas@biessmann.org>
Andre Renaud [Thu, 5 May 2016 13:28:15 +0000 (07:28 -0600)]
at91: nand: Set up the ECC strength correctly
This needs to be set to avoid a fatal error when ECC is used.
Signed-off-by: Andre Renaud <andre@designa-electronics.com> Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andreas Bießmann <andreas@biessmann.org>
Andre Renaud [Thu, 5 May 2016 13:28:14 +0000 (07:28 -0600)]
at91: Correct NAND ECC register access
This uses the wrote base register value. Fix it.
Signed-off-by: Andre Renaud <andre@designa-electronics.com> Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andreas Bießmann <andreas@biessmann.org>
Simon Glass [Thu, 5 May 2016 13:28:10 +0000 (07:28 -0600)]
net: macb: Flush correct cache portion when sending
The end address of the cache flush must be cache-line-aligned since
otherwise (at least on ARM926-EJS) the request is ignored. When the cache
is enabled this means that packets are not sent.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Andreas Bießmann <andreas@biessmann.org>
Simon Glass [Thu, 5 May 2016 13:28:09 +0000 (07:28 -0600)]
net: macb: Prepare for driver-model conversion
Adjust this driver to avoid using struct netdev in functions that driver
model will call. Also refactor the receive function to be compatible with
driver model.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de>
Tested-on: smartweb, corvus, taurus, axm Tested-by: Heiko Schocher <hs@denx.de> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Andreas Bießmann <andreas@biessmann.org>
Andre Renaud [Thu, 5 May 2016 13:28:08 +0000 (07:28 -0600)]
net: Handle an empty bootp extension section
Avoid generating this section if there is nothing in it.
Signed-off-by: Andre Renaud <andre@designa-electronics.com> Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Simon Glass [Thu, 5 May 2016 13:28:07 +0000 (07:28 -0600)]
bootm: Align cache flush end address correctly
Flushing part of the cache should be done on cache boundaries. Trying to
flush part of a cache line is not supported and the request may be ignored
or print warnings.
Adjust the bootm code to align the end address to prevent this problem.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de>
Tested-on: smartweb, corvus, taurus, axm Tested-by: Heiko Schocher <hs@denx.de> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Andreas Bießmann <andreas@biessmann.org>
Simon Glass [Thu, 5 May 2016 13:28:06 +0000 (07:28 -0600)]
arm: Allow skipping of low-level init with I-cache on
At present CONFIG_SKIP_LOWLEVEL_INIT prevents U-Boot from calling
lowlevel_init(). This means that the instruction cache is not enabled and
the board runs very slowly.
What is really needed in many cases is to skip the call to lowlevel_init()
but still perform CP15 init. Add an option to handle this.
Reviewed-by: Heiko Schocher <hs@denx.de>
Tested-on: smartweb, corvus, taurus, axm Tested-by: Heiko Schocher <hs@denx.de> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andreas Bießmann <andreas@biessmann.org>
Marek Vasut [Wed, 4 May 2016 21:05:23 +0000 (23:05 +0200)]
gpio: at91: Fix pullup/pulldown configuration on PIO3
On systems with PIO3 (SAMA5D3/D4/..), the pullup and pulldown configuration
is mutualy exclusive. This patch assures that the opposite pull resistor gets
disabled before the requested pull resistor is enabled. This changes behavior
of at91_set_pio_pulldown() such that the pullup is only disabled if pulldown
is to be enabled. This changes behavior of at91_set_pio_pullup() such that
the pulldown is only disabled if pullup is to be enabled.
Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andreas Bießmann <andreas.devel@googlemail.com> Cc: Josh Wu <josh.wu@atmel.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Andreas Bießmann <andreas@biessmann.org>
Teddy Reed [Fri, 10 Jun 2016 02:18:44 +0000 (19:18 -0700)]
verified-boot: Minimal support for booting U-Boot proper from SPL
This allows a board to configure verified boot within the SPL using
a FIT or FIT with external data. It also allows the SPL to perform
signature verification without needing relocation.
The board configuration will need to add the following feature defines:
CONFIG_SPL_CRYPTO_SUPPORT
CONFIG_SPL_HASH_SUPPORT
CONFIG_SPL_SHA256
In this example, SHA256 is the only selected hashing algorithm.
And the following booleans:
CONFIG_SPL=y
CONFIG_SPL_DM=y
CONFIG_SPL_LOAD_FIT=y
CONFIG_SPL_FIT=y
CONFIG_SPL_OF_CONTROL=y
CONFIG_SPL_OF_LIBFDT=y
CONFIG_SPL_FIT_SIGNATURE=y
Signed-off-by: Teddy Reed <teddy.reed@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> Acked-by: Andreas Dannenberg <dannenberg@ti.com> Acked-by: Sumit Garg <sumit.garg@nxp.com>
Andrew F. Davis [Wed, 8 Jun 2016 15:19:14 +0000 (10:19 -0500)]
ti_armv7_common: env: Remove no longer needed mem_reserve
The kernel can now use DT to reserve memory carveouts and
these areas are now the default for drivers that need reserved
memory, so reserving more here is unneeded and any memory reserved
this way will be wasted.
Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Keerthy [Tue, 7 Jun 2016 10:35:25 +0000 (16:05 +0530)]
arm: dra7xx: Assign omap_vcores based on board type
Currently omap_vcores which holds pmic data is being assigned based
on the SoC type. PMIC is not a part of SoC. It is logical to
to assign omap_vcores based on board type. Hence over ride the
vcores_init function and assign omap_vcores based on the board type.
Bin Meng [Wed, 8 Jun 2016 12:07:38 +0000 (05:07 -0700)]
x86: Probe pinctrl driver in cpu_init_r()
At present pinctrl driver gets probed in ich6_gpio driver's probe
routine, which has two issues:
- Pin's PADs only gets configured when GPIO driver is probed, which
is not done by default. This leaves the board in a partially
functional state as we must initialize PADs correctly to get
perepherals fully working.
- The probe routine of pinctrl driver is called multiple times, as
normally there are multiple GPIO controllers. It should really
be called just once.
Move the call to syscon_get_by_driver_data() from ich6_gpio driver
to cpu_init_r().
Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: George McCollister <george.mccollister@gmail.com> Tested-by: George McCollister <george.mccollister@gmail.com>
Bin Meng [Wed, 8 Jun 2016 12:07:35 +0000 (05:07 -0700)]
x86: baytrail: Configure card detect pin of the SD controller
As of today, the latest version FSP (gold4) for BayTrail misses the
PAD configuration of the SD controller's Card Detect signal. The
default PAD value for the CD pin sets the pin to work in GPIO mode,
which causes card detect status cannot be reflected by the Present
State register in the SD controller (bit 16 & bit 18 are always zero).
Add a configuration for this pin in the pinctrl node.
Note I've checked the PAD configuration for all the pins in all the
3 controllers (eMMC/SDIO/SD). Only this SDMMC3_CD_B pin does not get
initialized to correct mode by FSP. With fsp,emmc-boot-mode set to
2 (eMMC 4.1), eMMC pins are initialized to func 1, but if we set
fsp,emmc-boot-mode to 1 (auto), those pins are initialized to func 3
which is correct according to datasheet.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
Bin Meng [Wed, 8 Jun 2016 12:07:34 +0000 (05:07 -0700)]
x86: baytrail: Change fsp, emmc-boot-mode to "auto"
At present all BayTrail boards configure fsp,emmc-boot-mode to 2,
which means "eMMC 4.1" per FSP documentation. However, eMMC 4.1
only shows up on some early stepping silicon of BayTrail SoC.
Newer stepping SoC integrates an eMMC 4.5 controller. Intel FSP
provides a config option fsp,emmc-boot-mode which tells FSP which
eMMC controller it initializes. Instead of hardcoded to 2, now
we change it to 1 which means "auto".
With this change, MinnowMax board (with a D0 stepping BayTrail SoC)
can see the eMMC 4.5 controller at PCI address 00.17.00 via U-Boot
'pci' command.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
An accumulated length was incorrectly added to current each pass
through the loop. On system with more than 2 cores this caused a
corrupt MADT to be generated.
Signed-off-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Yuan Yao [Wed, 8 Jun 2016 10:25:00 +0000 (18:25 +0800)]
armv8: ls2080aqds: Enable QSPI boot support
This patch adds QSPI boot support for LS2080AQDS board.
The QSPI boot image need to be programmed into the QSPI flash
first. Then we can switch to booting from QSPI memory space.
Signed-off-by: Yuan Yao <yao.yuan@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
Yuan Yao [Wed, 8 Jun 2016 10:24:59 +0000 (18:24 +0800)]
configs: ls2080aqds_nand_defconfig: Enable QSPI
The Freescale QSPI driver has been converted to Driver Model.
This patch enables FSL_QSPI and its dependence options, DM, DM_SPI,
OF_CONTROL and so on.
Signed-off-by: Yuan Yao <yao.yuan@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
Yuan Yao [Wed, 8 Jun 2016 10:24:54 +0000 (18:24 +0800)]
armv8: ls2080aqds: disable IFC NOR & QIXIS when QSPI enable
When QSPI is enabled, NOR flash and QIXIS can't be accessed
through IFC due to pin mux. Enable I2C QIXIS access and I2C
early init to read the sysclk and ddrclk.
Signed-off-by: Yuan Yao <yao.yuan@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
Yuan Yao [Wed, 8 Jun 2016 10:24:53 +0000 (18:24 +0800)]
configs: ls2080a_common: Remove duplicate NOR configs
The NOR flash related configure options appear in ls2080aqds.h and
ls2080ardb.h, and the two files both includ ls2080a_common.h.
This patch remove the duplicated options in ls2080a_common.h.
Signed-off-by: Yuan Yao <yao.yuan@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
board: ls2080a: Add "mcinitcmd" env for MC & DPL deployment
Environment variable mcinitcmd is defined to initiate MC and DPL
deployment from the location where it is stored (NOR, NAND, SD, SATA,
USB) during booting. If this variable is not defined then macro
MC_BOOT_ENV_VAR will be null and MC will not be booted and DPL will
not be applied during U-boot booting.
Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
Yunhui Cui [Wed, 8 Jun 2016 02:31:42 +0000 (10:31 +0800)]
armv8/ls2080a: configure PMU's PCTBENR to enable WDT
The SP805-WDT module on LS2080A requires configuration of PMU's
PCTBENR register to enable watchdog counter decrement and reset
signal generation. The watchdog clock needs to be enabled first.
Signed-off-by: Yunhui Cui <yunhui.cui@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
sunxi: Move the SPL stack top to 0x1A000 on Allwinner A64/A80
Since the SRAM C corruption issue is now resolved on Allwinner
A64, it is possible to move the stack top to the address 0x1A000
on both A64 and A80. The boot ROM can load SPL binaries with
up to 32 KiB size on A64 (the 24 KiB SPL size limitation only
affects A10/A20), and this patch also ensures the availability
of 8 KiB stack.
Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Currently the AHB1 clock speed is configured as 200MHz by
the SPL, but this causes a subtle and hard to reproduce data
corruption in SRAM C (for example, this can't be easily
detected with a trivial memset/memcmp test).
For what it's worth, the Allwinner's BSP configures AHB1
as 200MHz, as can be verified by running the devmem2 tool
in the system running the Allwinner's kernel 3.10.x:
It is yet to be confirmed whether faster AHB1/AHB2 clock settings
can be used safely if we initialize the AXP803 PMIC instead of
using reset defaults. But in order to resolve the data corruption
problem right now, it's best to downclock AHB1 to a safe level.
Note that this issue only affects the SPL, which is not fully
supported on Allwinner A64 yet and it should not affect the boot0
usage (unless somebody can confirm SRAM C corruption with the
boot0 too).
Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
spi: pic32_spi: add SPI master driver for PIC32 SoC.
This driver implements SPI protocol in master mode to communicate
with the SPI device connected on SPI bus. It handles /CS explicitly
by controlling respective pin as gpio ('cs-gpios' property in dt node)
and uses PIO mode for SPI transaction. It is configurable based
on driver-model only.
Cc: Jagan Teki <jteki@openedev.com> Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Paul Burton [Thu, 9 Jun 2016 12:09:52 +0000 (13:09 +0100)]
MIPS: Make CONFIG_SYS_DCACHE_LINE_SIZE int, not hex
For consistency with the other cache-related Kconfig entries & the
values actually set by boards, make CONFIG_SYS_DCACHE_LINE_SIZE an int
entry instead of a hex entry.
Signed-off-by: Paul Burton <paul.burton@imgtec.com> Fixes: 372286217f05 ("MIPS: Split I & D cache line size config")
Paul Burton [Thu, 9 Jun 2016 12:09:51 +0000 (13:09 +0100)]
MIPS: Fix invalidate_dcache_range to operate on L1 Dcache
Commit fb64cda57998 ("MIPS: Abstract cache op loops with a macro")
accidentally modified invalidate_dcache_range to operate on the L1
Icache instead of the Dcache. Fix the cache op used to operate on the
Dcache.
Signed-off-by: Paul Burton <paul.burton@imgtec.com> Fixes: fb64cda57998 ("MIPS: Abstract cache op loops with a macro")
projects / karo-tx-uboot.git / log