Vicente Jiménez [Sat, 8 Jan 2011 00:54:26 +0000 (00:54 +0000)]
video: matroxfb: Correct video option in comments and kernel config help.
Configuring the kernel I found that the Matrox frame buffer help has a
different option than the one in the docs (Documentation/fb/matroxfb.txt).
I decided to check the source code to see what is the correct option.
drivers/video/matrox/matroxfb_base.c has a lot of comments that sugests
that the video option is "matrox".
However in line 2452 of this same file you have:
fb_get_options("matroxfb", &option)
video=matroxfb:XXX is the correct video option not video=matrox:XXX.
Signed-off-by: Vicente Jimenez Aguilar <googuy@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
fbdev: sh_mobile_hdmi: framebuffer notifiers have to be registered
A previous patch added a framebuffer notifier to sh_mobile_hdmi.c,
but did not register it with the framebuffer core. This patch adds
such a registration and moves the notifier block into dynamically
allocated per-device private data.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
fbdev: sh_mobile_hdmi: add command line option to use the preferred EDID mode
Currently, if no command-line option is specified, the sh_mobile_hdmi
will use the default 720p video mode. If a command line option of the
form "video=sh_mobile_lcdc:<width>x<height>@<refresh>" is provided,
the driver will look for that mode among those, available in the
monitor EDID. This patch adds the ability to request the driver to
use monitor's preferred mode by specifying 0 as width and hight in
the above string. If that mode is not supported by the system, the
driver will continue scanning through EDID modes, until it finds a
suitable one.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Linus Torvalds [Tue, 11 Jan 2011 00:10:33 +0000 (16:10 -0800)]
Merge branch 'driver-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6
* 'driver-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6:
driver core: Document that device_rename() is only for networking
sysfs: remove useless test from sysfs_merge_group
driver-core: merge private parts of class and bus
driver core: fix whitespace in class_attr_string
Linus Torvalds [Mon, 10 Jan 2011 23:39:48 +0000 (15:39 -0800)]
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86: (36 commits)
sony-laptop: support new hotkeys on the P, Z and EC series
platform/x86: Consistently select LEDS Kconfig options
sony-laptop: fix sparse non-ANSI function warning
intel_ips: fix sparse non-ANSI function warning
Support KHLB2 in the compal laptop driver
acer-wmi: Enabled Acer Launch Manager mode
[PATCH] intel_pmic_gpio: modify EOI handling following change of kernel irq subsystem
ACPI Thinkpad: We must always call va_end() after va_start() but do not do so in thinkpad_acpi.c::acpi_evalf()
acer-wmi: Initialize wlan/bluetooth/wwan rfkill software block state
acer-wmi: Detect the WiFi/Bluetooth/3G devices available
acer-wmi: Add 3G rfkill sysfs file
acer-wmi: Add acer wmi hotkey events support
platform/x86: Kconfig: Replace select by depends on ACPI_WMI
ideapad: pass ideapad_priv as argument (part 2)
ideapad: pass ideapad_priv as argument (part 1)
ideapad: add markups, unify comments and return result when init
ideapad: add hotkey support
ideapad: let camera power control entry under platform driver
ideapad: add platform driver for ideapad
fujitsu-laptop: fix compiler warning on pnp_ids
...
Linus Torvalds [Mon, 10 Jan 2011 23:39:23 +0000 (15:39 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68knommu: Need to check __get_user()/__put_user() result
m68knommu: signal.c __user annotations
m68knommu: Equivalent of "m68k: handle new gcc's"
m68knommu: f_pcr has been gone since headers' merge
m68knommu: Don't lose state if sigframe setup fails
m68knommu: Handle multiple pending signals
m68knommu: Switch to saner sigsuspend
m68knommu: Don't bother with SA_ONESHOT
m68k: Check __get_user()/__put_user() return value
m68k: Missing syscall_trace() on sigreturn
m68k: Fix stack mangling logics in sigreturn
m68k: If we fail to set sigframe up, just leave regs alone...
m68k: Don't lose state if sigframe setup fails
m68k: Simplify the singlestepping handling in signals
m68k: Switch to saner sigsuspend()
m68k: Resetting sa_handler in local copy of k_sigaction is pointless
m68k/sun3: Kill pte_unmap() warnings
Linus Torvalds [Mon, 10 Jan 2011 22:52:44 +0000 (14:52 -0800)]
Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
[IA64] Avoid array overflow if there are too many cpus in SRAT table
[IA64] Remove unlikely from cpu_is_offline
[IA64] irq_ia64, use set_irq_chip
[IA64] perfmon: Change vmalloc to vzalloc and drop memset.
[IA64] eliminate race condition in smp_flush_tlb_mm
Linus Torvalds [Mon, 10 Jan 2011 22:50:38 +0000 (14:50 -0800)]
Merge branch 'for-torvalds' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson
* 'for-torvalds' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
ux500: allow 5500 and 8500 to be built together
ux500: modem_irq is only for 5500
ux500: dynamic SOC detection
ux500: rename MOP board Kconfig
ux500: remove build-time changing macros
Linus Torvalds [Mon, 10 Jan 2011 22:50:08 +0000 (14:50 -0800)]
Merge branch 'msm-smp' of git://codeaurora.org/quic/kernel/davidb/linux-msm
* 'msm-smp' of git://codeaurora.org/quic/kernel/davidb/linux-msm:
msm: add SMP support for msm
msm: hotplug: support cpu hotplug on msm
msm: timer: SMP timer support for msm
msm: scm-boot: Support for setting cold/warm boot addresses
msm: Secure Channel Manager (SCM) support
Márton Németh [Mon, 13 Dec 2010 20:59:09 +0000 (21:59 +0100)]
staging: usbip: remove double giveback of URB
In the vhci_urb_dequeue() function the TCP connection is checked twice.
Each time when the TCP connection is closed the URB is unlinked and given
back. Remove the second attempt of unlinking and giving back of the URB completely.
This patch fixes the bug described at https://bugzilla.kernel.org/show_bug.cgi?id=24872 .
Linus Torvalds [Mon, 10 Jan 2011 19:18:59 +0000 (11:18 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: (30 commits)
MAINTAINERS: Add tomoyo-dev-en ML.
SELinux: define permissions for DCB netlink messages
encrypted-keys: style and other cleanup
encrypted-keys: verify datablob size before converting to binary
trusted-keys: kzalloc and other cleanup
trusted-keys: additional TSS return code and other error handling
syslog: check cap_syslog when dmesg_restrict
Smack: Transmute labels on specified directories
selinux: cache sidtab_context_to_sid results
SELinux: do not compute transition labels on mountpoint labeled filesystems
This patch adds a new security attribute to Smack called SMACK64EXEC. It defines label that is used while task is running.
SELinux: merge policydb_index_classes and policydb_index_others
selinux: convert part of the sym_val_to_name array to use flex_array
selinux: convert type_val_to_struct to flex_array
flex_array: fix flex_array_put_ptr macro to be valid C
SELinux: do not set automatic i_ino in selinuxfs
selinux: rework security_netlbl_secattr_to_sid
SELinux: standardize return code handling in selinuxfs.c
SELinux: standardize return code handling in selinuxfs.c
SELinux: standardize return code handling in policydb.c
...
Rabin Vincent [Wed, 8 Dec 2010 05:38:00 +0000 (11:08 +0530)]
ux500: modem_irq is only for 5500
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
[Modified to hit the right file] Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Rabin Vincent [Wed, 8 Dec 2010 05:37:58 +0000 (11:07 +0530)]
ux500: rename MOP board Kconfig
Rename the MOP board Kconfig entries to the same name as the machine
type, so that the machine_is_*() macros work correctly.
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
[Updated to match changes in the tree] Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Rabin Vincent [Wed, 8 Dec 2010 05:37:57 +0000 (11:07 +0530)]
ux500: remove build-time changing macros
To allow the possiblity of building U8500 and U5500 support in the same
image.
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
[Rebased to latest changes in Russells tree] Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Linus Torvalds [Mon, 10 Jan 2011 16:57:46 +0000 (08:57 -0800)]
Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging: (44 commits)
hwmon: Support for Dallas Semiconductor DS620
hwmon: driver for Sensirion SHT21 humidity and temperature sensor
hwmon: Add humidity attribute to sysfs ABI
hwmon: sysfs ABI updates
hwmon: (via-cputemp) sync hotplug handling with coretemp/pkgtemp
hwmon: (lm95241) Rewrite to avoid using macros
hwmon: (applesmc) Fix checkpatch errors and fix value range checks
hwmon: (applesmc) Update copyright information
hwmon: (applesmc) Silence driver
hwmon: (applesmc) Simplify feature sysfs handling
hwmon: (applesmc) Dynamic creation of fan files
hwmon: (applesmc) Extract all features generically
hwmon: (applesmc) Handle new temperature format
hwmon: (applesmc) Dynamic creation of temperature files
hwmon: (applesmc) Introduce a register lookup table
hwmon: (applesmc) Use pr_fmt and pr_<level>
hwmon: (applesmc) Relax the severity of device init failure
hwmon: (applesmc) Add MacBookAir3,1(3,2) support
hwmon: (w83627hf) Use pr_fmt and pr_<level>
hwmon: (w83627ehf) Use pr_fmt and pr_<level>
...
Currently the x86 platform devices are not consistent about selecting
or depending on the LEDs Kconfig variables, and this inconsistency
leads to Kconfig getting upset and refusing to offer LEDs (even on
non-x86 platforms):
drivers/platform/x86/Kconfig:422:error: recursive dependency detected!
drivers/platform/x86/Kconfig:422: symbol EEEPC_WMI depends on ACPI_WMI
drivers/platform/x86/Kconfig:438: symbol ACPI_WMI is selected by ACER_WMI
drivers/platform/x86/Kconfig:18: symbol ACER_WMI depends on LEDS_CLASS
drivers/leds/Kconfig:10: symbol LEDS_CLASS is selected by EEEPC_WMI
Fix this by always selecting rather than depending on the symbols as
slightly more drivers use this approach already and it seems more
user friendly.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
Linus Torvalds [Mon, 10 Jan 2011 16:48:46 +0000 (08:48 -0800)]
Merge branch 'stable/bug-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
* 'stable/bug-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
xen/event: validate irq before get evtchn by irq
xen/fb: fix potential memory leak
xen/fb: fix xenfb suspend/resume race.
xen: disable ACPI NUMA for PV guests
xen/irq: Cleanup the find_unbound_irq
Linus Torvalds [Mon, 10 Jan 2011 16:48:29 +0000 (08:48 -0800)]
Merge branch 'stable/generic' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
* 'stable/generic' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
xen: HVM X2APIC support
apic: Move hypervisor detection of x2apic to hypervisor.h
Linus Torvalds [Mon, 10 Jan 2011 16:38:01 +0000 (08:38 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6:
slub: Fix a crash during slabinfo -v
tracing/slab: Move kmalloc tracepoint out of inline code
slub: Fix slub_lock down/up imbalance
slub: Fix build breakage in Documentation/vm
slub tracing: move trace calls out of always inlined functions to reduce kernel code size
slub: move slabinfo.c to tools/slub/slabinfo.c
Linus Torvalds [Mon, 10 Jan 2011 16:29:25 +0000 (08:29 -0800)]
Merge branch 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6
* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
Documentation/kbuild: add info that 'choice' can have a symbol name
kbuild: add numeric --set-val option to scripts/config
headers_check: Fix warning text
headers_check: better search for functions in headers
scripts/coccinelle: update for compatability with Coccinelle 0.2.4
tags: put function prototypes back!
Kconfig: fix single letter command in scripts/config
gitignore: add scripts/recordmcount
Linus Torvalds [Mon, 10 Jan 2011 16:28:38 +0000 (08:28 -0800)]
Merge branch 'packaging' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6
* 'packaging' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
deb-pkg: s/hdr/kernel_headers_/ && s/header/libc_headers_/
deb-pkg: Make deb-pkg generate a seperate linux-libc-dev deb
kbuild: create linux-headers package in deb-pkg
kbuild, deb-pkg: support overriding userland architecture
kbuild, deb-pkg: select userland architecture based on UTS_MACHINE
kbuild, deb-pkg: Fix build with paranoid umask
Linus Torvalds [Mon, 10 Jan 2011 16:28:17 +0000 (08:28 -0800)]
Merge branch 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6
* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
nconf: handle comment entries within choice/endchoice
kconfig: fix warning
kconfig: Make expr_copy() take a const argument
kconfig: simplify select-with-unmet-direct-dependency warning
kconfig: add more S_INT and S_HEX consistency checks
kconfig: fix `zconfdebug' extern declaration
kconfig/conf: merge duplicate switch's case
kconfig: fix typos
kbuild/gconf: add dummy inline for bind_textdomain_codeset()
kbuild/nconf: fix spaces damage
kconfig: nuke second argument of conf_write_symbol()
kconfig: do not define AUTOCONF_INCLUDED
kconfig: the day kconfig warns about "select"-abuse has come
Linus Torvalds [Mon, 10 Jan 2011 16:27:52 +0000 (08:27 -0800)]
Merge branch 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6
* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
mkuboot.sh: Fail if mkimage is missing
gen_init_cpio: checkpatch fixes
gen_init_cpio: Avoid race between call to stat() and call to open()
modpost: Fix address calculation in reloc_location()
Make fixdep error handling more explicit
checksyscalls: Fix stand-alone usage
modpost: Put .zdebug* section on white list
kbuild: fix interaction of CONFIG_IKCONFIG and KCONFIG_CONFIG
kbuild: export linux/{a.out,kvm,kvm_para}.h on headers_install_all
kbuild: introduce HDR_ARCH_LIST for headers_install_all
headers_install: check exit status of unifdef
gen_init_cpio: remove leading `/' from file names
scripts/genksyms: fix header usage
fixdep: use hash table instead of a single array
Linus Torvalds [Mon, 10 Jan 2011 16:15:37 +0000 (08:15 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (34 commits)
HID: roccat: Update sysfs attribute doc
HID: roccat: don't use #pragma pack
HID: roccat: Add support for Roccat Kone[+] v2
HID: roccat: reduce number of functions in kone and pyra drivers
HID: roccat: declare meaning of pack pragma usage in driver headers
HID: roccat: use class for char device for sysfs attribute creation
sysfs: Introducing binary attributes for struct class
HID: hidraw: add compatibility ioctl() for 32-bit applications.
HID: hid-picolcd: Fix memory leak in picolcd_debug_out_report()
HID: picolcd: fix misuse of logical operation in place of bitop
HID: usbhid: base runtime PM on modern API
HID: replace offsets values with their corresponding BTN_* defines
HID: hid-mosart: support suspend/resume
HID: hid-mosart: ignore buttons report
HID: hid-picolcd: don't use flush_scheduled_work()
HID: simplify an index check in hid_lookup_collection
HID: Hoist assigns from ifs
HID: Remove superfluous __inline__
HID: Use vzalloc for vmalloc/memset(,0...)
HID: Add and use hid_<level>: dev_<level> equivalents
...
Linus Torvalds [Mon, 10 Jan 2011 16:14:53 +0000 (08:14 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
spi / PM: Support dev_pm_ops
PM: Prototype the pm_generic_ operations
PM / Runtime: Generic resume shouldn't set RPM_ACTIVE unconditionally
PM: Use dev_name() in core device suspend and resume routines
PM: Permit registration of parentless devices during system suspend
PM: Replace the device power.status field with a bit field
PM: Remove redundant checks from core device resume routines
PM: Use a different list of devices for each stage of device suspend
PM: Avoid compiler warning in pm_noirq_op()
PM: Use pm_wakeup_pending() in __device_suspend()
PM / Wakeup: Replace pm_check_wakeup_events() with pm_wakeup_pending()
PM: Prevent dpm_prepare() from returning errors unnecessarily
PM: Fix references to basic-pm-debugging.txt in drivers-testing.txt
PM / Runtime: Add synchronous runtime interface for interrupt handlers (v3)
PM / Hibernate: When failed, in_suspend should be reset
PM / Hibernate: hibernation_ops->leave should be checked too
Freezer: Fix a race during freezing of TASK_STOPPED tasks
PM: Use proper ccflag flag in kernel/power/Makefile
PM / Runtime: Fix comments to match runtime callback code
Linus Torvalds [Mon, 10 Jan 2011 16:14:02 +0000 (08:14 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
firewire: use split transaction timeout only for split transactions
firewire: ohci: consolidate context status flags
firewire: ohci: cache the context run bit
firewire: ohci: flush AT contexts after bus reset - addendum
firewire: ohci: flush AT contexts after bus reset for OHCI 1.2
firewire: net: set carrier state at ifup
firewire: net: add carrier detection
firewire: net: ratelimit error messages
firewire: ohci: restart iso DMA contexts on resume from low power mode
firewire: ohci: restore GUID on resume.
firewire: ohci: use common buffer for self IDs and AR descriptors
firewire: ohci: optimize iso context checks in the interrupt handler
firewire: make PHY packet header format consistent
firewire: ohci: properly clear posted write errors
firewire: ohci: flush MMIO writes in the interrupt handler
firewire: ohci: fix AT context initialization error handling
firewire: ohci: Asynchronous Reception rewrite
firewire: core: Update WARN uses
firewire: nosy: char device is not seekable
Linus Torvalds [Mon, 10 Jan 2011 15:50:40 +0000 (07:50 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2:
nilfs2: unfold nilfs_dat_inode function
nilfs2: do not pass sbi to functions which can get it from inode
nilfs2: get rid of nilfs_mount_options structure
nilfs2: simplify nilfs_mdt_freeze_buffer
nilfs2: get rid of loaded flag from nilfs object
nilfs2: fix a checkpatch error in page.c
nilfs2: fiemap support
nilfs2: mark buffer heads as delayed until the data is written to disk
nilfs2: call nilfs_error inside bmap routines
fs/nilfs2/super.c: Use printf extension %pV
MAINTAINERS: add nilfs2 git tree entry
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
cifs: use CreationTime like an i_generation field
cifs: switch cifs_open and cifs_create to use CIFSSMBUnixSetFileInfo
cifs: show "acl" in DebugData Features when it's compiled in
cifs: move "ntlmssp" and "local_leases" options out of experimental code
cifs: replace some hardcoded values with preprocessor constants
cifs: remove unnecessary locking around sequence_number
[CIFS] Fix minor merge conflict in fs/cifs/dir.c
CIFS: Simplify cifs_open code
CIFS: Simplify non-posix open stuff (try #2)
CIFS: Add match_port check during looking for an existing connection (try #4)
CIFS: Simplify ipv*_connect functions into one (try #4)
cifs: Support NTLM2 session security during NTLMSSP authentication [try #5]
cifs: don't overwrite dentry name in d_revalidate
Joe Jin [Fri, 7 Jan 2011 06:50:12 +0000 (14:50 +0800)]
xen/event: validate irq before get evtchn by irq
When retrieving the event channel number from irq, the irq
number may not be valid under some conditions.
So far that can be when we suspend/resume and irq ends with -1.
Validate and return sanitized irq and provide diagnostics information.
[v3: added unlikely on the WARN path]
[v2: reworded the commit message] Signed-off-by: Joe Jin <joe.jin@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Tested-by: Gurudas Pai <gurudas.pai@oracle.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Andrew Morton <akpm@linux-foundation.org>
Joe Jin [Fri, 7 Jan 2011 10:20:54 +0000 (18:20 +0800)]
xen/fb: fix potential memory leak
This patch fixes a potential memory leak when xenfb connect to
the backend fails.
Thanks for Ian's review and comments.
[v2: reworded the commit message a bit]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Joe Jin <joe.jin@oracle.com> Tested-by: Gurudas Pai <gurudas.pai@oracle.com> Acked-by: Ian Campbell <ian.campbell@citrix.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Andrew Morton <akpm@linux-foundation.org>
The root cause of the panic is the race between the resume and reconnect to the backend.
Clearing the 'update_wanted' flag of xenfb before disconnecting from the
backend fixes this issue.
Signed-off-by: Joe Jin <joe.jin@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Tested-by: Gurudas Pai <gurudas.pai@oracle.com> Acked-by: Ian Campbell <ian.campbell@citrix.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Andrew Morton <akpm@linux-foundation.org>
Ian Campbell [Fri, 3 Dec 2010 09:54:03 +0000 (09:54 +0000)]
xen: disable ACPI NUMA for PV guests
Xen does not currently expose PV-NUMA information to PV
guests. Therefore disable NUMA for the time being to prevent the
kernel picking up on an host-level NUMA information which it might
come across in the firmware.
[ Added comment - Jeremy ]
Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Linus Torvalds [Mon, 10 Jan 2011 15:46:26 +0000 (07:46 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm:
dlm: sanitize work_start() in lowcomms.c
dlm: reduce cond_resched during send
dlm: use TCP_NODELAY
dlm: Use cmwq for send and receive workqueues
dlm: Handle application limited situations properly.
Linus Torvalds [Mon, 10 Jan 2011 15:43:54 +0000 (07:43 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: fix ioctl ABI
fuse: allow batching of FORGET requests
fuse: separate queue for FORGET requests
fuse: ioctl cleanup
Fix up trivial conflict in fs/fuse/inode.c due to RCU lookup having done
the RCU-freeing of the inode in fuse_destroy_inode().
Randy Dunlap [Sun, 9 Jan 2011 03:36:21 +0000 (19:36 -0800)]
fs: fix namei.c kernel-doc notation
Fix new kernel-doc notation warnings in fs/namei.c and spell
ECHILD correctly.
Warning(fs/namei.c:218): No description found for parameter 'flags'
Warning(fs/namei.c:425): Excess function parameter 'Returns' description in 'nameidata_drop_rcu'
Warning(fs/namei.c:478): Excess function parameter 'Returns' description in 'nameidata_dentry_drop_rcu'
Warning(fs/namei.c:540): Excess function parameter 'Returns' description in 'nameidata_drop_rcu_last'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Nick Piggin <npiggin@kernel.dk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sumit Semwal [Thu, 2 Dec 2010 11:27:14 +0000 (11:27 +0000)]
OMAP: DSS2: Introduce omap_channel as an omap_dss_device parameter, add new overlay manager.
A panel connects to one of the overlay managers of DSS through some interface block.
On OMAP4, specifying the type of the display is not sufficient to conclude which manager
the panel should be connected to.
Hence, a new member 'channel' is introduced in omap_dss_device structure to determine
which manager the panel uses. The dss_recheck_connections() called in dss_driver_probe()
uses this channel parameter to set the correct manager to the corresponding omap_dss_device.
The channel parameter is used only once to ensure the correct managers are set for each
panel. The parameter dssdev->manager->id will take care of ensuring that the panel and
then the interface driver configures the correct DISPC channel.
Also, add a new Overlay Manager in manager.c, make other changes needed for LCD2 channel.
Sumit Semwal [Thu, 2 Dec 2010 11:27:12 +0000 (11:27 +0000)]
OMAP: DSS2: LCD2 Channel Changes for DISPC
DISPC functions are modified in order to work when the manager is LCD2.
This includes:
Adding new IRQs specific to LCD2 and their handling.
Provide dumps of the new manager's registers.
Provide dumps of the new manager's clocks.
Checks for channel for registers DISPC_CONTROL2 and DISPC_CONFIG2
which can't be parametrized.
Sumit Semwal [Thu, 2 Dec 2010 11:27:11 +0000 (11:27 +0000)]
OMAP: DSS2: Change remaining DISPC functions for new omap_channel argument
The following dispc functions are also changed to incorporate channel as an argument:
-dispc_lclk_rate()
-dispc_pclk_rate()
-dispc_set_pol_freq()
-dispc_set_clock_div()
-dispc_get_clock_div()
Sumit Semwal [Thu, 2 Dec 2010 11:27:10 +0000 (11:27 +0000)]
OMAP: DSS2: Introduce omap_channel argument to DISPC functions used by interface drivers
The interface drivers (dsi.c, sdi.c etc) need to call dispc functions with
dssdev->manager->id as a parameter to specify the DISPC channel which they want
to configure/use, this is required as the same functions are now used to configure
dispc registers of different channels.
The following dispc functions are changed to incorporate channel as an argument:
-dispc_enable_fifohandcheck()
-dispc_set_lcd_size()
-dispc_set_parallel_interface_mode()
-dispc_set_tft_data_lines()
-dispc_set_lcd_display_type()
-dispc_set_lcd_timings()
Sumit Semwal [Thu, 2 Dec 2010 11:27:09 +0000 (11:27 +0000)]
OMAP: DSS2: Represent DISPC register defines with channel as parameter
On OMAP4, we have a new DISPC channel for Overlay Manager LCD2. There is a set
of regsiters for LCD2 channel similar to the existing LCD channel, like
DISPC_CONTROL2, DISPC_DIVISOR2, DISPC_CONFIG2 and so on.
Introduce new enum members for LCD2 Channel and corresponding Overlay Manager
in display.h.
Represent the following DISPC register defines with channel as a parameter
to differentiate between LCD and LCD2 registers (and also DIGIT in some cases):
This parametrization helps in reducing the number of register defines for DISPC.
Replace the existing reads/writes to these registers in this new way.
Also, Introduce defines for registers DISPC_CONTROL2 and DISPC_CONFIG2 which
are used exclusively for LCD2 channel.
Archit Taneja [Thu, 25 Nov 2010 12:28:10 +0000 (17:58 +0530)]
OMAP: DSS2: Clean up DISPC color mode validation checks
The supported set of color modes varies for different DISPC pipelines(plane)
and omap version. This makes the checks for validation of a color mode more
complicated as new omap versions are added.
A dss_feature function is created which tells if a color_mode is supported
for a plane on the current omap revision.
Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
Bryan Wu [Wed, 17 Nov 2010 13:34:34 +0000 (13:34 +0000)]
OMAP: use generic DPI panel driver in board files
Still keep sharp_ls_panel, since the sharp_ls_panel driver contains blacklight
control driver code which will be moved out later. Then we can use generic DPI
driver for sharp_ls_panel.
Signed-off-by: Bryan Wu <bryan.wu@canonical.com> Acked-by: Archit Taneja <archit@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
Bryan Wu [Wed, 17 Nov 2010 13:34:33 +0000 (13:34 +0000)]
OMAP: DSS2: Add generic DPI panel display driver
Generic DPI panel driver includes the driver and 4 similar panel configurations. It
will match the panel name which is passed from platform data and setup the
right configurations.
With generic DPI panel driver, we can remove those 4 duplicated panel display
drivers. In the future, it is simple for us just add new panel configuration
date in panel-generic-dpi.c to support new display panel.
Rajkumar N [Thu, 4 Nov 2010 11:28:42 +0000 (12:28 +0100)]
OMAP3630: DSS2: Enable Pre-Multiplied Alpha Support
Enable dss to process color formats with pre-mulitplied alpha.
With this we can have alpha values defined for each pixel
and hence can have different blending values for each pixel.
sysfs entry has been created for this and pre-multiplied alpha
support is turned off by default.
Signed-off-by: Sudeep Basavaraj <sudeep.basavaraj@ti.com> Signed-off-by: Rajkumar N <rajkumar.nagarajan@ti.com> Signed-off-by: Samreen <samreen@ti.com> Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
Ryusuke Konishi [Sun, 26 Dec 2010 15:07:30 +0000 (00:07 +0900)]
nilfs2: unfold nilfs_dat_inode function
nilfs_dat_inode function was a wrapper to switch between normal dat
inode and gcdat, a clone of the dat inode for garbage collection.
This function got obsolete when the gcdat inode was removed, and now
we can access the dat inode directly from a nilfs object. So, we will
unfold the wrapper and remove it.
Ryusuke Konishi [Sun, 26 Dec 2010 15:05:49 +0000 (00:05 +0900)]
nilfs2: do not pass sbi to functions which can get it from inode
This removes argument for passing nilfs_sb_info structure from
nilfs_set_file_dirty and nilfs_load_inode_block functions. We can get
a pointer to the structure from inodes.
Ryusuke Konishi [Sun, 26 Dec 2010 07:38:43 +0000 (16:38 +0900)]
nilfs2: fiemap support
This adds fiemap to nilfs. Two new functions, nilfs_fiemap and
nilfs_find_uncommitted_extent are added.
nilfs_fiemap() implements the fiemap inode operation, and
nilfs_find_uncommitted_extent() helps to get a range of data blocks
whose physical location has not been determined.
nilfs_fiemap() collects extent information by looping through
nilfs_bmap_lookup_contig and nilfs_find_uncommitted_extent routines.
Ryusuke Konishi [Sun, 26 Dec 2010 07:28:28 +0000 (16:28 +0900)]
nilfs2: mark buffer heads as delayed until the data is written to disk
Nilfs does not allocate new blocks on disk until they are actually
written to. To implement fiemap, we need to deal with such blocks.
To allow successive fiemap patch to distinguish mapped but unallocated
regions, this marks buffer heads of those new blocks as delayed and
clears the flag after the blocks are written to disk.
Ryusuke Konishi [Fri, 19 Nov 2010 06:26:20 +0000 (15:26 +0900)]
nilfs2: call nilfs_error inside bmap routines
Some functions using nilfs bmap routines can wrongly return invalid
argument error (i.e. -EINVAL) that bmap returns as an internal code
for btree corruption.
This fixes the issue by catching and converting the internal EINVAL to
EIO and calling nilfs_error function inside bmap routines.
Jeff Layton [Fri, 7 Jan 2011 16:30:27 +0000 (11:30 -0500)]
cifs: use CreationTime like an i_generation field
Reduce false inode collisions by using the CreationTime like an
i_generation field. This way, even if the server ends up reusing
a uniqueid after a delete/create cycle, we can avoid matching
the inode incorrectly.
Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
Jeff Layton [Fri, 7 Jan 2011 16:30:29 +0000 (11:30 -0500)]
cifs: switch cifs_open and cifs_create to use CIFSSMBUnixSetFileInfo
We call CIFSSMBUnixSetPathInfo in these functions, but we have a
filehandle since an open was just done. Switch these functions to
use CIFSSMBUnixSetFileInfo instead.
In practice, these codepaths are only used if posix opens are broken.
Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
Jeff Layton [Fri, 7 Jan 2011 16:30:28 +0000 (11:30 -0500)]
cifs: move "ntlmssp" and "local_leases" options out of experimental code
I see no real need to leave these sorts of options under an
EXPERIMENTAL ifdef. Since you need a mount option to turn this code
on, that only blows out the testing matrix.
local_leases has been under the EXPERIMENTAL tag for some time, but
it's only the mount option that's under this label. Move it out
from under this tag.
The NTLMSSP code is also under EXPERIMENTAL, but it needs a mount
option to turn it on, and in the future any distro will reasonably
want this enabled. Go ahead and move it out from under the
EXPERIMENTAL tag.
Signed-off-by: Jeff Layton <jlayton@redhat.com> Acked-by: Suresh Jayaraman <sjayaraman@suse.de> Signed-off-by: Steve French <sfrench@us.ibm.com>
Jeff Layton [Fri, 7 Jan 2011 16:30:28 +0000 (11:30 -0500)]
cifs: replace some hardcoded values with preprocessor constants
A number of places that deal with RFC1001/1002 negotiations have bare
"15" or "16" values. Replace them with RFC_1001_NAME_LEN and
RFC_1001_NAME_LEN_WITH_NULL.
The patch also cleans up some checkpatch warnings for code surrounding
the changes. This should apply cleanly on top of the patch to remove
Local_System_Name.
Reported-and-Reviwed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
Jeff Layton [Fri, 7 Jan 2011 16:30:28 +0000 (11:30 -0500)]
cifs: remove unnecessary locking around sequence_number
The server->sequence_number is already protected by the srv_mutex. The
GlobalMid_lock is unneeded here.
Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
Grant Likely [Sun, 9 Jan 2011 04:42:42 +0000 (21:42 -0700)]
of/flattree: forward declare struct device_node in of_fdt.h
This patch forward declares struct device_node to fix a compile error
when of_fdt.h is included, but of.h is not. Alternately, including
linux/of.h could have been added to of_fdt.h, but that pulls in a lot
of unnecessary declarations when only working with the flattened
form.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
projects / karo-tx-linux.git / log