David Chinner [Sun, 4 Sep 2005 22:33:35 +0000 (08:33 +1000)]
[XFS] Fix racy access to pb_flags. pagebuf_rele() modified pb_flags after
the pagebuf had been unlocked if the buffer was delwri. At high load, this
could result in a race when the superblock was being synced that would
result the flags being incorrect and the iodone functions being executed
incorrectly. This then leads to iclog callback failures or AIL list
corruptions resulting in filesystem shutdowns.
Tim Shimmin [Sun, 4 Sep 2005 22:29:01 +0000 (08:29 +1000)]
[XFS] Fixes a bug in the quota code when allocating a new dquot record
which can cause an extent hole to be filled and a free extent to be
processed. In this case, we make a few mistakes: forget to pass back the
transaction, forget to put a hold on the buffer and forget to add the buf
to the new transaction.
[XFS] Delay direct I/O completion to a workqueue This is nessecary
because aio+dio completions may happen from irq context but we need
process context for converting unwritten extents. We also queue regular
direct I/O completions to workqueue for regularity, there's only one
queue_work call per syscall.
Tim Shimmin [Fri, 2 Sep 2005 06:52:55 +0000 (16:52 +1000)]
[XFS] Need to unlock the AIL before calling xfs_force_shutdown() because
when it goes to force out the log, and get the tail lsn, it will want to
get the AIL lock.
Tim Shimmin [Fri, 2 Sep 2005 06:41:43 +0000 (16:41 +1000)]
[XFS] Fix up the calculation of the reservation overhead to hopefully
include all the components which make up the transaction in the ondisk
log. Having this incomplete has shown up as problems on IRIX when some v2
log changes went in. The symptom was the msg of "xfs_log_write:
reservation ran out. Need to up reservation" and was seen on synchronous
writes on files with lots of holes (and therefore lots of extents).
David Chinner [Fri, 2 Sep 2005 06:40:47 +0000 (16:40 +1000)]
[XFS] Prevent the incore superblock sb_fdblocks count from leaking when we
are getting ENOSPC errors on writes. When we fail to allocate space for
indirect blocks in xfs_bmapi() make sure we release the direct block
allocation before returning.
Kumar Gala [Wed, 31 Aug 2005 04:54:47 +0000 (14:54 +1000)]
[PATCH] ppc: L2 cache prefetch fixes on 745x
We run into problems if we blindly enable L2 prefetching without
checking that the L2 cache is actually enabled. Additionaly, if we
disable the L2 cache we need to ensure that we disable L2 prefetching.
Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This fixes a problem with pci_map_rom() which doesn't properly
update the ROM BAR value with the address thas allocated for it by the
PCI code. This problem, among other, breaks boot on Mac laptops.
It'ss a new version based on Linus latest one with better error
checking.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Adrian Bunk [Wed, 31 Aug 2005 15:43:51 +0000 (17:43 +0200)]
[PATCH] Add missing select's to DVB_BUDGET_AV
This fixes the following compile error:
...
LD .tmp_vmlinux1
drivers/built-in.o: In function `frontend_init':
budget-av.c:(.text+0xb9448): undefined reference to `tda10046_attach'
budget-av.c:(.text+0xb9518): undefined reference to `tda10021_attach'
drivers/built-in.o: In function `philips_tu1216_request_firmware':
budget-av.c:(.text+0xb937b): undefined reference to `request_firmware'
make: *** [.tmp_vmlinux1] Error 1
Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Johannes Stezenbach <js@linuxtv.org> Acked-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
I had some time to think about PCI assign issues in 2.6.13-rc series.
The major problem here is that we call pci_assign_unassigned_resources()
way too early - at subsys_initcall level. Therefore we give no chances
to ACPI and PnP routines (called at fs_initcall level) to reserve their
respective resources properly, as the comments in drivers/pnp/system.c
and drivers/acpi/motherboard.c suggest:
/**
* Reserve motherboard resources after PCI claim BARs,
* but before PCI assign resources for uninitialized PCI devices
*/
So I moved the pci_assign_unassigned_resources() call to
pcibios_assign_resources() (fs_initcall), which should hopefully fix a
lot of problems and make PCIBIOS_MIN_IO tweaks unnecessary.
Other changes:
- remove resource assignment code from pcibios_assign_resources(), since
it duplicates pci_assign_unassigned_resources() functionality and
actually does nothing in 2.6.13;
- modify ROM assignment code as per Ben's suggestion: try to use firmware
settings by default (if PCI_ASSIGN_ROMS is not set);
- set CARDBUS_IO_SIZE back to 4K as it's a wonderful stress test for
various setups.
Confirmed by Tero Roponen <teanropo@cc.jyu.fi> (who had problems with
the 4kB CardBus IO size previously).
Clemens Ladisch [Tue, 2 Aug 2005 13:26:52 +0000 (15:26 +0200)]
[ALSA] usb-audio: throttle MIDI URB resubmits on USB errors
USB generic driver
When a USB error occurs that might indicate that the device has been
unplugged, don't resubmit the URB immediately to prevent flooding the
log with error messages before khubd has us disconnect()ed.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
USB generic driver
Emagic devices pad their packets not with 0xff bytes but with a 0xff
byte followed by garbage, so we have to stop at the first such byte.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Takashi Iwai [Wed, 24 Aug 2005 12:14:57 +0000 (14:14 +0200)]
[ALSA] hda-intel - Fix ULI M5461 support
HDA Intel driver
Fix and clean up for the support of ULI M5461
- set CORB/RIRB sizes explicitly
- add workarounds for ULI on ia32
- max number of streams depends on the chip type now
- increase the size of BDL
Sergey Vlasov [Mon, 22 Aug 2005 11:43:39 +0000 (13:43 +0200)]
[ALSA] HP nx6110 quirks
Intel8x0 driver,AC97 Codec
The HP nx6110 laptop needs to have Headphone Jack Sense enabled so
that the internal speakers will be turned off when headphones are
plugged in.
Also ac97_quirk=hp_only is needed to make a single Master volume in
the mixer instead of separate volumes for internal speakers and
headphones, which just confuses the user.
Jaroslav Kysela [Thu, 18 Aug 2005 11:43:12 +0000 (13:43 +0200)]
[ALSA] PCM resume cleanups
Digigram VX core,CS4231 driver,ATIIXP driver,VIA82xx driver
VIA82xx-modem driver,au88x0 driver,CS46xx driver,Trident driver
This patch disables SNDRV_PCM_INFO_RESUME flag for drivers which does not
support the full resume.
Takashi Iwai [Tue, 16 Aug 2005 14:54:12 +0000 (16:54 +0200)]
[ALSA] nm256 - Fix PM and irq handling
NM256 driver
- Fixed the PCM resume - restoring the rate setting
- Fixed the handling of buggy irqs
- Dynamically acquire/release irq handler to make the driver more robust
to unknown irq storms (as OSS driver does).
Clemens Ladisch [Mon, 15 Aug 2005 06:35:25 +0000 (08:35 +0200)]
[ALSA] usb-audio: use vmalloc for the PCM buffer
USB generic driver
With the double buffering, we no longer need contiguous memory for the
PCM buffer, so we can use vmalloc() instead of the preallocation
functions, and increase the maximum size to 256 KB.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Clemens Ladisch [Mon, 15 Aug 2005 06:24:44 +0000 (08:24 +0200)]
[ALSA] usb-audio: double-buffer all playback data
USB generic driver
We always had to use double buffering when capturing, and when playback
data for one URB crosses a buffer boundary. The latter would make hwptr
updates less precise because the double-buffered data is read from the
buffer much earlier than the other data is read by the host controller.
Double-buffering all data allows to update hwptr immediately after the
data was copied to the USB buffer(s), which has the additional benefit
of avoiding the latency imposed by the host controller's delay of up to
one frame when interrupting.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Clemens Ladisch [Mon, 15 Aug 2005 06:22:39 +0000 (08:22 +0200)]
[ALSA] usb-audio: optimize handling of capture URBs
USB generic driver
When preparing capture URBs, we don't need to stop when we cross a
period boundary because we now never handle more than one millisecond of
data per URB anyway.
When handling captured data, use an extra flag to call
snd_pcm_period_elapsed() no more than once. This allows us to move the
period boundary checking code before the copying of the data which
avoids a second locking of the substream's lock.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Clemens Ladisch [Fri, 12 Aug 2005 13:19:39 +0000 (15:19 +0200)]
[ALSA] usb-audio: schedule high speed URBs with 1 ms alignment
USB generic driver
The EHCI driver doesn't interrupt more than once per millisecond, and
organizes all iso transfers with frame-sized ITDs, so we can (try to)
be more efficient by aligning all URBs on frame boundaries.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Clemens Ladisch [Fri, 12 Aug 2005 06:28:27 +0000 (08:28 +0200)]
[ALSA] usb-audio: fix packets per URB calculation for playback
USB generic driver
When determining how many packets are needed for one period, we cannot
assume that all packets have their maximum size -- we always use the
nominal sample rate when sending data, and could use an even lower rate
when the endpoint uses frequency feedback.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
projects / linux-beck.git / log