Mikko Rapeli [Mon, 22 Aug 2016 18:32:42 +0000 (20:32 +0200)]
include/uapi/linux/if_pppol2tp.h: include linux/in.h and linux/in6.h
Fixes userspace compilation errors like:
error: field ‘addr’ has incomplete type
struct sockaddr_in addr; /* IP address and port to send to */
^
error: field ‘addr’ has incomplete type
struct sockaddr_in6 addr; /* IP address and port to send to */
Signed-off-by: Mikko Rapeli <mikko.rapeli@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
'Commit 3c8b3efc061a ("vmxnet3: allow variable length transmit data ring
buffer")' changed the size of the buffers in the tx data ring from a
fixed size of 128 bytes to a variable size.
However, while copying data to the data ring, vmxnet3_copy_hdr continues
to carry the old code that assumes fixed buffer size of 128. This patch
fixes it by adding correct offset based on the actual data ring buffer
size.
Signed-off-by: Guolin Yang <gyang@vmware.com> Signed-off-by: Shrikrishna Khare <skhare@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Duyck [Sat, 20 Aug 2016 03:58:26 +0000 (20:58 -0700)]
ixgbe: Do not clear RAR entry when clearing VMDq for SAN MAC
The RAR entry for the SAN MAC address was being cleared when we were
clearing the VMDq pool bits. In order to prevent this we need to add
an extra check to protect the SAN MAC from being cleared.
Fixes: 6e982aeae ("ixgbe: Clear stale pool mappings") Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes: 3acb50c18d8d ("sctp: delay as much as possible skb_linearize") Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This series includes some bug fixes for mlx5e driver.
From Saeed and Tariq, Optimize MTU change to not reset when it is not required.
From Paul, Command interface message length check to speedup firmware
command preparation.
From Mohamad, Save pci state when pci error is detected.
From Amir, Flow counters "lastuse" update fix.
From Hadar, Use correct flow dissector key on flower offloading.
Plus a small optimization for switchdev hardware id query.
From Or, three patches to address some E-Switch offloads issues.
For -stable of 4.6.y and 4.7.y:
net/mlx5e: Use correct flow dissector key on flower offloading
net/mlx5: Fix pci error recovery flow
net/mlx5: Added missing check of msg length in verifying its signature
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Or Gerlitz [Thu, 18 Aug 2016 18:09:11 +0000 (21:09 +0300)]
net/mlx5: E-Switch, Avoid ACLs in the offloads mode
When we are in the switchdev/offloads mode, HW matching is done as
dictated by the offloaded rules and hence we don't need to enable
the ACLs mechanism used by the legacy mode.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Or Gerlitz [Thu, 18 Aug 2016 18:09:10 +0000 (21:09 +0300)]
net/mlx5: E-Switch, Set the send-to-vport rules in the correct table
While adding actual offloading support to the new switchdev mode, we didn't
change the setup of the send-to-vport rules to put them in the slow path
table, fix that.
Fixes: 1033665e63b6 ('net/mlx5: E-Switch, Use two priorities for SRIOV offloads mode') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Or Gerlitz [Thu, 18 Aug 2016 18:09:09 +0000 (21:09 +0300)]
net/mlx5: E-Switch, Return the correct devlink e-switch mode
Since mlx5 has also the NONE e-switch mode, we must translate from mlx5
mode to devlink mode on the devlink eswitch mode get call, do that.
While here, remove the mlx5_ prefix from the static function helpers
that deal with the mode to comply with the rest of the code.
Fixes: c930a3ad7453 ('net/mlx5e: Add devlink based SRIOV mode change') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Hadar Hen Zion [Thu, 18 Aug 2016 18:09:08 +0000 (21:09 +0300)]
net/mlx5e: Retrieve the switchdev id from the firmware only once
Avoid firmware command execution each time the switchdev HW ID attr get
call is made. We do that by reading the ID (PF NIC MAC) only once at
load time and store it on the representor structure.
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Hadar Hen Zion [Thu, 18 Aug 2016 18:09:07 +0000 (21:09 +0300)]
net/mlx5e: Use correct flow dissector key on flower offloading
The wrong key is used when extracting the address type field set by
the flower offload code. We have to use the control key and not the
basic key, fix that.
Fixes: e3a2b7ed018e ('net/mlx5e: Support offload cls_flower with drop action') Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Amir Vadai [Thu, 18 Aug 2016 18:09:06 +0000 (21:09 +0300)]
net/mlx5: Update last-use statistics for flow rules
Set lastuse statistic, when number of packets is changed compared to
last query. This was wrongly dropped when bulk counter reading was added.
Fixes: a351a1b03bf1 ('net/mlx5: Introduce bulk reading of flow counters') Signed-off-by: Amir Vadai <amirva@mellanox.com> Reported-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Paul Blakey [Thu, 18 Aug 2016 18:09:05 +0000 (21:09 +0300)]
net/mlx5: Added missing check of msg length in verifying its signature
Set and verify signature calculates the signature for each of the
mailbox nodes, even for those that are unused (from cache). Added
a missing length check to set and verify only those which are used.
While here, also moved the setting of msg's nodes token to where we
already go over them. This saves a pass because checksum is disabled,
and the only useful thing remaining that set signature does is setting
the token.
Fixes: e126ba97dba9 ('mlx5: Add driver for Mellanox Connect-IB
adapters') Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Xunlei Pang [Thu, 18 Aug 2016 04:33:28 +0000 (12:33 +0800)]
fib_trie: Fix the description of pos and bits
1) Fix one typo: s/tn/tp/
2) Fix the description about the "u" bits.
Signed-off-by: Xunlei Pang <xlpang@redhat.com> Acked-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Rafał Miłecki [Wed, 17 Aug 2016 13:37:14 +0000 (15:37 +0200)]
net: bgmac: fix reversed check for MII registration error
It was failing on successful registration returning meaningless errors.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Fixes: 55954f3bfdac ("net: ethernet: bgmac: move BCMA MDIO Phy code into a separate file") Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Wed, 17 Aug 2016 12:56:26 +0000 (05:56 -0700)]
tcp: fix use after free in tcp_xmit_retransmit_queue()
When tcp_sendmsg() allocates a fresh and empty skb, it puts it at the
tail of the write queue using tcp_add_write_queue_tail()
Then it attempts to copy user data into this fresh skb.
If the copy fails, we undo the work and remove the fresh skb.
Unfortunately, this undo lacks the change done to tp->highest_sack and
we can leave a dangling pointer (to a freed skb)
Later, tcp_xmit_retransmit_queue() can dereference this pointer and
access freed memory. For regular kernels where memory is not unmapped,
this might cause SACK bugs because tcp_highest_sack_seq() is buggy,
returning garbage instead of tp->snd_nxt, but with various debug
features like CONFIG_DEBUG_PAGEALLOC, this can crash the kernel.
This bug was found by Marco Grassi thanks to syzkaller.
Fixes: 6859d49475d4 ("[TCP]: Abstract tp->highest_sack accessing & point to next skb") Reported-by: Marco Grassi <marco.gra@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Cc: Yuchung Cheng <ycheng@google.com> Cc: Neal Cardwell <ncardwell@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
cxgb4: Fixes resource allocation for ULD's in kdump kernel
At present the code to check in kdump kernel was not disabling
allocation of resources when CONFIG_CHELSIO_T4_DCB is defined, move the
code outside #defines so that it gets disabled irrespective of #define,
when in kdump kernel.
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David Daney [Tue, 16 Aug 2016 20:30:36 +0000 (13:30 -0700)]
net: thunderx: Fix OOPs with ethtool --register-dump
The ethtool_ops .get_regs function attempts to read the nonexistent
register NIC_QSET_SQ_0_7_CNM_CHG, which produces a "bus error" type
OOPs.
Fix by not attempting to read, and removing the definition of,
NIC_QSET_SQ_0_7_CNM_CHG. A zero is written into the register dump to
keep the layout unchanged.
Signed-off-by: David Daney <david.daney@cavium.com> Cc: <stable@vger.kernel.org> # 4.4.x- Signed-off-by: David S. Miller <davem@davemloft.net>
Yuval Mintz [Tue, 16 Aug 2016 15:40:18 +0000 (18:40 +0300)]
qede: Fix Tx timeout due to xmit_more
Driver uses netif_tx_queue_stopped() to make sure the xmit_more
indication will be honored, but that only checks for DRV_XOFF.
At the same time, it's possible that during transmission the DQL will
close the transmission queue with STACK_XOFF indication.
In re-configuration flows, when the threshold is relatively low, it's
possible that the device has no pending tranmissions, and during
tranmission the driver would miss doorbelling the HW.
Since there are no pending transmission, there will never be a Tx
completion [and thus the DQL would not remove the STACK_XOFF indication],
eventually causing the Tx queue to timeout.
While we're at it - also doorbell in case driver has to close the
transmission queue on its own [although this one is less important -
if the ring is full, we're bound to receive completion eventually,
which means the doorbell would only be postponed and not indefinetly
blocked].
Fixes: 312e06761c99 ("qede: Utilize xmit_more") Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The following patchset contains Netfilter updates for your net tree,
they are:
1) Dump only conntrack that belong to this namespace via /proc file.
This is some fallout from the conversion to single conntrack table
for all netns, patch from Liping Zhang.
2) Missing MODULE_ALIAS_NF_LOGGER() for the ARP family that prevents
module autoloading, also from Liping Zhang.
3) Report overquota event to the right netnamespace, again from Liping.
4) Fix tproxy listener sk refcount that leads to crash, from
Eric Dumazet.
5) Fix racy refcounting on object deletion from nfnetlink and rule
removal both for nfacct and cttimeout, from Liping Zhang.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Liping Zhang [Thu, 18 Aug 2016 12:39:05 +0000 (20:39 +0800)]
netfilter: cttimeout: fix use after free error when delete netns
In general, when we want to delete a netns, cttimeout_net_exit will
be called before ipt_unregister_table, i.e. before ctnl_timeout_put.
But after call kfree_rcu in cttimeout_net_exit, we will still decrease
the timeout object's refcnt in ctnl_timeout_put, this is incorrect,
and will cause a use after free error.
It is easy to reproduce this problem:
# while : ; do
ip netns add xxx
ip netns exec xxx nfct add timeout testx inet icmp timeout 200
ip netns exec xxx iptables -t raw -p icmp -I OUTPUT -j CT --timeout testx
ip netns del xxx
done
=======================================================================
BUG kmalloc-96 (Tainted: G B E ): Poison overwritten
-----------------------------------------------------------------------
INFO: 0xffff88002b5161e8-0xffff88002b5161e8. First byte 0x6a instead of
0x6b
INFO: Allocated in cttimeout_new_timeout+0xd4/0x240 [nfnetlink_cttimeout]
age=104 cpu=0 pid=3330
___slab_alloc+0x4da/0x540
__slab_alloc+0x20/0x40
__kmalloc+0x1c8/0x240
cttimeout_new_timeout+0xd4/0x240 [nfnetlink_cttimeout]
nfnetlink_rcv_msg+0x21a/0x230 [nfnetlink]
[ ... ]
So only when the refcnt decreased to 0, we call kfree_rcu to free the
timeout object. And like nfnetlink_acct do, use atomic_cmpxchg to
avoid race between ctnl_timeout_try_del and ctnl_timeout_put.
Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Liping Zhang [Sat, 13 Aug 2016 15:13:01 +0000 (23:13 +0800)]
netfilter: nfnetlink_acct: fix race between nfacct del and xt_nfacct destroy
Suppose that we input the following commands at first:
# nfacct add test
# iptables -A INPUT -m nfacct --nfacct-name test
And now "test" acct's refcnt is 2, but later when we try to delete the
"test" nfacct and the related iptables rule at the same time, race maybe
happen:
CPU0 CPU1
nfnl_acct_try_del nfnl_acct_put
atomic_dec_and_test //ref=1,testfail -
- atomic_dec_and_test //ref=0,testok
- kfree_rcu
atomic_inc //ref=1 -
So after the rcu grace period, nf_acct will be freed but it is still linked
in the nfnl_acct_list, and we can access it later, then oops will happen.
Convert atomic_dec_and_test and atomic_inc combinaiton to one atomic
operation atomic_cmpxchg here to fix this problem.
Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
1) Buffers powersave frame test is reversed in cfg80211, fix from Felix
Fietkau.
2) Remove bogus WARN_ON in openvswitch, from Jarno Rajahalme.
3) Fix some tg3 ethtool logic bugs, and one that would cause no
interrupts to be generated when rx-coalescing is set to 0. From
Satish Baddipadige and Siva Reddy Kallam.
4) QLCNIC mailbox corruption and napi budget handling fix from Manish
Chopra.
5) Fix fib_trie logic when walking the trie during /proc/net/route
output than can access a stale node pointer. From David Forster.
6) Several sctp_diag fixes from Phil Sutter.
7) PAUSE frame handling fixes in mlxsw driver from Ido Schimmel.
8) Checksum fixup fixes in bpf from Daniel Borkmann.
9) Memork leaks in nfnetlink, from Liping Zhang.
10) Use after free in rxrpc, from David Howells.
11) Use after free in new skb_array code of macvtap driver, from Jason
Wang.
12) Calipso resource leak, from Colin Ian King.
13) mediatek bug fixes (missing stats sync init, etc.) from Sean Wang.
14) Fix bpf non-linear packet write helpers, from Daniel Borkmann.
15) Fix lockdep splats in macsec, from Sabrina Dubroca.
16) hv_netvsc bug fixes from Vitaly Kuznetsov, mostly to do with VF
handling.
17) Various tc-action bug fixes, from CONG Wang.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (116 commits)
net_sched: allow flushing tc police actions
net_sched: unify the init logic for act_police
net_sched: convert tcf_exts from list to pointer array
net_sched: move tc offload macros to pkt_cls.h
net_sched: fix a typo in tc_for_each_action()
net_sched: remove an unnecessary list_del()
net_sched: remove the leftover cleanup_a()
mlxsw: spectrum: Allow packets to be trapped from any PG
mlxsw: spectrum: Unmap 802.1Q FID before destroying it
mlxsw: spectrum: Add missing rollbacks in error path
mlxsw: reg: Fix missing op field fill-up
mlxsw: spectrum: Trap loop-backed packets
mlxsw: spectrum: Add missing packet traps
mlxsw: spectrum: Mark port as active before registering it
mlxsw: spectrum: Create PVID vPort before registering netdevice
mlxsw: spectrum: Remove redundant errors from the code
mlxsw: spectrum: Don't return upon error in removal path
i40e: check for and deal with non-contiguous TCs
ixgbe: Re-enable ability to toggle VLAN filtering
ixgbe: Force VLNCTRL.VFE to be set in all VMDq paths
...
Roman Mashak [Sun, 14 Aug 2016 05:35:02 +0000 (22:35 -0700)]
net_sched: allow flushing tc police actions
The act_police uses its own code to walk the
action hashtable, which leads to that we could
not flush standalone tc police actions, so just
switch to tcf_generic_walker() like other actions.
(Joint work from Roman and Cong.)
Signed-off-by: Roman Mashak <mrv@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
WANG Cong [Sun, 14 Aug 2016 05:35:01 +0000 (22:35 -0700)]
net_sched: unify the init logic for act_police
Jamal reported a crash when we create a police action
with a specific index, this is because the init logic
is not correct, we should always create one for this
case. Just unify the logic with other tc actions.
Fixes: a03e6fe56971 ("act_police: fix a crash during removal") Reported-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
WANG Cong [Sun, 14 Aug 2016 05:35:00 +0000 (22:35 -0700)]
net_sched: convert tcf_exts from list to pointer array
As pointed out by Jamal, an action could be shared by
multiple filters, so we can't use list to chain them
any more after we get rid of the original tc_action.
Instead, we could just save pointers to these actions
in tcf_exts, since they are refcount'ed, so convert
the list to an array of pointers.
The "ugly" part is the action API still accepts list
as a parameter, I just introduce a helper function to
convert the array of pointers to a list, instead of
relying on the C99 feature to iterate the array.
Fixes: a85a970af265 ("net_sched: move tc_action into tcf_common") Reported-by: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
WANG Cong [Sun, 14 Aug 2016 05:34:59 +0000 (22:34 -0700)]
net_sched: move tc offload macros to pkt_cls.h
struct tcf_exts belongs to filters, should not be visible
to plain tc actions.
Cc: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
WANG Cong [Sun, 14 Aug 2016 05:34:58 +0000 (22:34 -0700)]
net_sched: fix a typo in tc_for_each_action()
It is harmless because all users pass 'a' to this macro.
Fixes: 00175aec941e ("net/sched: Macro instead of CONFIG_NET_CLS_ACT ifdef") Cc: Amir Vadai <amir@vadai.me> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
WANG Cong [Sun, 14 Aug 2016 05:34:57 +0000 (22:34 -0700)]
net_sched: remove an unnecessary list_del()
This list_del() for tc action is not needed actually,
because we only use this list to chain bulk operations,
therefore should not be carried for latter operations.
Fixes: ec0595cc4495 ("net_sched: get rid of struct tcf_common") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
WANG Cong [Sun, 14 Aug 2016 05:34:56 +0000 (22:34 -0700)]
net_sched: remove the leftover cleanup_a()
After refactoring tc_action into tcf_common, we no
longer need to cleanup temporary "actions" in list,
they are permanently stored in the hashtable.
Fixes: a85a970af265 ("net_sched: move tc_action into tcf_common") Reported-by: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 17 Aug 2016 23:20:24 +0000 (19:20 -0400)]
Merge branch '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue
Jeff Kirsher says:
====================
Intel Wired LAN Driver Updates 2016-08-16
This series contains fixes to e1000e, igb, ixgbe and i40e.
Kshitiz Gupta provides a fix for igb to resolve the PHY delay compensation
math in several functions.
Jarod Wilson provides a fix for e1000e which had to broken up into 2
patches, first is prepares the driver for expanding the list of NICs
that have occasional ~10 hour clock jumps when being used for PTP.
Second patch actually fixes i218 silicon which has been experiencing
the clock jumps while using PTP.
Alex provides 2 patches for ixgbe now that he is back at Intel. First
fixes setting VLNCTRL.VFE bit, which was left unchanged in earlier patches
which resulted in disabling VLAN filtering for all the VFs. Second
corrects the support for disabling the VLAN tag filtering via the
feature bit.
Lastly, David fixes i40e which was causing a kernel panic when
non-contiguous traffic classes or traffic classes not starting with TC0,
were configured on a link partner switch. To fix this, changed the
logic when determining the total number of TCs enabled.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 17 Aug 2016 23:18:34 +0000 (19:18 -0400)]
Merge branch 'mlxsw-fixes'
Jiri Pirko says:
====================
mlxsw: IPv4 UC router fixes
Ido says:
Patches 1-3 fix a long standing problem in the driver's init sequence,
which manifests itself quite often when routing daemons try to configure
an IP address on registered netdevs that don't yet have an associated
vPort.
Patches 4-9 add missing packet traps for the router to work properly and
also fix ordering issue following the recent changes to the driver's init
sequence.
The last patch isn't related to the router, but fixes a general problem
in which under certain conditions packets aren't trapped to CPU.
v1->v2:
- Change order of patch 7
- Add patch 6 following Ilan's comment
- Add patchset name and cover letter
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Wed, 17 Aug 2016 14:39:37 +0000 (16:39 +0200)]
mlxsw: spectrum: Allow packets to be trapped from any PG
When packets enter the device they are classified to a priority group
(PG) buffer based on their PCP value. After their egress port and
traffic class are determined they are moved to the switch's shared
buffer and await transmission, if:
Packets scheduled to transmission through CPU port (trapped to CPU) use
traffic class 7, which has a zero maximum and minimum quotas. However,
when such packets arrive from PG 0 they are admitted to the shared
buffer as PG 0 has a non-zero minimum quota.
Allow all packets to be trapped to the CPU - regardless of the PG they
were classified to - by assigning a 10KB minimum quota for CPU port and
TC7.
Fixes: 8e8dfe9fdf06 ("mlxsw: spectrum: Add IEEE 802.1Qaz ETS support") Reported-by: Tamir Winetroub <tamirw@mellanox.com> Tested-by: Tamir Winetroub <tamirw@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Wed, 17 Aug 2016 14:39:36 +0000 (16:39 +0200)]
mlxsw: spectrum: Unmap 802.1Q FID before destroying it
Before destroying the 802.1Q FID we should first remove the VID-to-FID
mapping. This makes mlxsw_sp_fid_destroy() symmetric with regards to
mlxsw_sp_fid_create().
Fixes: 14d39461b3f4 ("mlxsw: spectrum: Use per-FID struct for the VLAN-aware bridge") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Wed, 17 Aug 2016 14:39:35 +0000 (16:39 +0200)]
mlxsw: spectrum: Add missing rollbacks in error path
While going over the code I noticed we are missing two rollbacks in the
port's creation error path. Add them and adjust the place of one of them
in the port's removal sequence so that both are symmetric.
Fixes: 56ade8fe3fe1 ("mlxsw: spectrum: Add initial support for Spectrum ASIC") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Wed, 17 Aug 2016 14:39:33 +0000 (16:39 +0200)]
mlxsw: spectrum: Trap loop-backed packets
One of the conditions to generate an ICMP Redirect Message is that "the
packet is being forwarded out the same physical interface that it was
received from" (RFC 1812).
Therefore, we need to be able to trap such packets and let the kernel
decide what to do with them.
For each RIF, enable the loop-back filter, which will raise the LBERROR
trap whenever the ingress RIF equals the egress RIF.
Fixes: 99724c18fc66 ("mlxsw: spectrum: Introduce support for router interfaces") Reported-by: Ilan Tayari <ilant@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Wed, 17 Aug 2016 14:39:31 +0000 (16:39 +0200)]
mlxsw: spectrum: Mark port as active before registering it
Commit bbf2a4757b30 ("mlxsw: spectrum: Initialize ports at the end of
init sequence") moved ports initialization to the end of the init
sequence, which means ports are the first to be removed during fini.
Since the FDB delayed work is still active when ports are removed it's
possible for it to process FDB notifications of inactive ports,
resulting in a warning message.
Fix that by marking ports as inactive only after unregistering them. The
NETDEV_UNREGISTER event will invoke bridge's driver port removal
sequence that will cause the FDB (and FDB notifications) to be flushed.
Fixes: bbf2a4757b30 ("mlxsw: spectrum: Initialize ports at the end of init sequence") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Wed, 17 Aug 2016 14:39:30 +0000 (16:39 +0200)]
mlxsw: spectrum: Create PVID vPort before registering netdevice
After registering a netdevice it's possible for user space applications
to configure an IP address on it. From the driver's perspective, this
means a router interface (RIF) should be created for the PVID vPort.
Therefore, we must create the PVID vPort before registering the
netdevice.
Fixes: 99724c18fc66 ("mlxsw: spectrum: Introduce support for router interfaces") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Wed, 17 Aug 2016 14:39:29 +0000 (16:39 +0200)]
mlxsw: spectrum: Remove redundant errors from the code
Currently, when device configuration fails we emit errors to the kernel
log despite the fact we already get these from the EMAD transaction
layer, so remove them.
In addition to being unnecessary, removing these error messages will
allow us to reuse mlxsw_sp_port_add_vid() to create the PVID vPort
before registering the netdevice.
Fixes: 99724c18fc66 ("mlxsw: spectrum: Introduce support for router interfaces") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Wed, 17 Aug 2016 14:39:28 +0000 (16:39 +0200)]
mlxsw: spectrum: Don't return upon error in removal path
When removing a VLAN filter from the device we shouldn't return upon the
first error we encounter, as otherwise we'll have resources that will
never be freed nor used.
Instead, we should keep trying to free as much resources as possible in
a best effort mode.
Remove the error message as well, since we already get these from the
EMAD transaction code.
Fixes: 99724c18fc66 ("mlxsw: spectrum: Introduce support for router interfaces") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
inet_lookup_listener() and inet6_lookup_listener() no longer
take a reference on the found listener.
This minimal patch adds back the refcounting, but we might do
this differently in net-next later.
Fixes: 3b24d854cb35 ("tcp/dccp: do not touch listener sk_refcnt under synflood") Reported-and-tested-by: Denys Fedoryshchenko <nuclearcat@nuclearcat.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Linus Torvalds [Wed, 17 Aug 2016 19:10:22 +0000 (12:10 -0700)]
Merge tag 'for-v4.8-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply fixes from Sebastian Reichel.
* tag 'for-v4.8-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
power_supply: tps65217-charger: fix missing platform_set_drvdata()
power: reset: hisi-reboot: Unmap region obtained by of_iomap
power: reset: reboot-mode: fix build error of missing ioremap/iounmap on UM
power: supply: max17042_battery: fix model download bug.
Liping Zhang [Sat, 13 Aug 2016 14:46:04 +0000 (22:46 +0800)]
netfilter: nfnetlink_log: add "nf-logger-3-1" module alias name
Otherwise, if nfnetlink_log.ko is not loaded, we cannot add rules
to log packets to the userspace when we specify it with arp family,
such as:
# nft add rule arp filter input log group 0
<cmdline>:1:1-37: Error: Could not process rule: No such file or
directory
add rule arp filter input log group 0
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Liping Zhang [Mon, 15 Aug 2016 13:50:35 +0000 (21:50 +0800)]
netfilter: conntrack: do not dump other netns's conntrack entries via proc
We should skip the conntracks that belong to a different namespace,
otherwise other unrelated netns's conntrack entries will be dumped via
/proc/net/nf_conntrack.
Fixes: 56d52d4892d0 ("netfilter: conntrack: use a single hashtable for all namespaces") Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com> Reviewed-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Linus Torvalds [Tue, 16 Aug 2016 22:51:57 +0000 (15:51 -0700)]
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio/vhost fixes from Michael Tsirkin:
- test fixes
- a vsock fix
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
tools/virtio: add dma stubs
vhost/test: fix after swiotlb changes
vhost/vsock: drop space available check for TX vq
ringtest: test build fix
Linus Torvalds [Tue, 16 Aug 2016 22:50:22 +0000 (15:50 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Martin Schwidefsky:
"A couple of bug fixes, minor cleanup and a change to the default
config"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/dasd: fix failing CUIR assignment under LPAR
s390/pageattr: handle numpages parameter correctly
s390/dasd: fix hanging device after clear subchannel
s390/qdio: avoid reschedule of outbound tasklet once killed
s390/qdio: remove checks for ccw device internal state
s390/qdio: fix double return code evaluation
s390/qdio: get rid of spin_lock_irqsave usage
s390/cio: remove subchannel_id from ccw_device_private
s390/qdio: obtain subchannel_id via ccw_device_get_schid()
s390/cio: stop using subchannel_id from ccw_device_private
s390/config: make the vector optimized crc function builtin
s390/lib: fix memcmp and strstr
s390/crc32-vx: Fix checksum calculation for small sizes
s390: clarify compressed image code path
Dave Ertman [Fri, 12 Aug 2016 16:56:32 +0000 (09:56 -0700)]
i40e: check for and deal with non-contiguous TCs
The i40e driver was causing a kernel panic when
non-contiguous Traffic Classes, or Traffic Classes not
starting with TC0, were configured on a link partner switch.
i40e does not support non-contiguous TCs.
To fix this, the patch changes the logic when determining
the total number of TCs enabled. Before, this would use the
highest TC number enabled and assume that all TCs below it were
also enabled. Now, we create a bitmask of enabled TCs and scan
it to determine not only the number of TCs, but also if the set
of enabled TCs starts at zero and is contiguous. If not, then
DCB is disabled by only returning one TC.
Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Alexander Duyck [Fri, 12 Aug 2016 16:53:39 +0000 (09:53 -0700)]
ixgbe: Re-enable ability to toggle VLAN filtering
Back when I submitted the GSO code I messed up and dropped the support for
disabling the VLAN tag filtering via the feature bit. This patch
re-enables the use of the NETIF_F_HW_VLAN_CTAG_FILTER to enable/disable the
VLAN filtering independent of toggling promiscuous mode.
Fixes: b83e30104b ("ixgbe/ixgbevf: Add support for GSO partial") Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Alexander Duyck [Thu, 11 Aug 2016 21:51:56 +0000 (14:51 -0700)]
ixgbe: Force VLNCTRL.VFE to be set in all VMDq paths
When I was adding the code for enabling VLAN promiscuous mode with SR-IOV
enabled I had inadvertently left the VLNCTRL.VFE bit unchanged as I has
assumed there was code in another path that was setting it when we enabled
SR-IOV. This wasn't the case and as a result we were just disabling VLAN
filtering for all the VFs apparently.
Also the previous patches were always clearing CFIEN which was always set
to 0 by the hardware anyway so I am dropping the redundant bit clearing.
Fixes: 16369564915a ("ixgbe: Add support for VLAN promiscuous with SR-IOV") Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Linus Torvalds [Tue, 16 Aug 2016 18:49:02 +0000 (11:49 -0700)]
Merge tag 'pinctrl-v4.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"Here are a few pin control fixes for the v4.8 series, nothing special
about them:
- Add the missing <linux/io.h> header to the Intel Merrifield driver
to get rid of build mess.
- Drop two instances of pinctrl_unregister() called for drivers using
devm_* resource management.
- Remove the default debounce time for the AMD driver"
* tag 'pinctrl-v4.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: intel: merrifield: Add missed header
pinctrl/amd: Remove the default de-bounce time
pinctrl: pistachio: Drop pinctrl_unregister for devm_ registered device
pinctrl: meson: Drop pinctrl_unregister for devm_ registered device
Jarod Wilson [Tue, 26 Jul 2016 18:25:35 +0000 (14:25 -0400)]
e1000e: fix PTP on e1000_pch_lpt variants
I've got reports that the Intel I-218V NIC in Intel NUC5i5RYH systems used
as a PTP slave experiences random ~10 hour clock jumps, which are resolved
if the same workaround for the 82574 and 82583 is employed, so set the
appropriate flag2 in e1000_pch_lpt_info too.
Reported-by: Rupesh Patel <rupatel@redhat.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Jarod Wilson [Tue, 26 Jul 2016 18:25:34 +0000 (14:25 -0400)]
e1000e: factor out systim sanitization
This is prepatory work for an expanding list of adapter families that have
occasional ~10 hour clock jumps when being used for PTP. Factor out the
sanitization function and convert to using a feature (bug) flag, per
suggestion from Jesse Brandeburg.
Littering functional code with device-specific checks is much messier than
simply checking a flag, and having device-specific init set flags as needed.
There are probably a number of other cases in the e1000e code that
could/should be converted similarly.
Suggested-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
igb: fix adjusting PTP timestamps for Tx/Rx latency
Fix PHY delay compensation math in igb_ptp_tx_hwtstamp() and
igb_ptp_rx_rgtstamp. Add PHY delay compensation in
igb_ptp_rx_pktstamp().
In the IGB driver, there are two functions that retrieve timestamps
received by the PHY - igb_ptp_rx_rgtstamp() and igb_ptp_rx_pktstamp().
The previous commit only changed igb_ptp_rx_rgtstamp(), and the change
was incorrect.
There are two instances in which PHY delay compensations should be
made:
- Before the packet transmission over the PHY, the latency between
when the packet is timestamped and transmission of the packets,
should be an add operation, but it is currently a subtract.
- After the packets are received from the PHY, the latency between
the receiving and timestamping of the packets should be a subtract
operation, but it is currently an add.
Signed-off-by: Kshitiz Gupta <kshitiz.gupta@ni.com> Fixes: 3f544d2 (igb: adjust ptp timestamps for tx/rx latency) Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
net: ethernet: mediatek: fix runtime warning raised by inconsistent struct device pointers passed to DMA API
Runtime warning occurs if DMA-API debug feature is enabled that would be
raised by pointers passed to DMA API as arguments to inconsistent struct
device objects, so that the patch makes them usage aligned between DMA
operations such as dma_map_*() and dma_unmap_*() to eliminate the warning.
Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: ethernet: mediatek: fix flow control settings on GMAC0 is not being enabled properly
Commit 08ef55c6f257acf3bdc6940813f80e8f0f5d90ec
("net-next: mediatek: fix gigabit and flow control advertisement")
had supported proper flow control settings for GMAC1. But for GMAC0,
1.GMAC0 shares the common logic with GMAC1 inside mtk_phy_link_adjust()
to adapt various settings for the target phy.
2.GMAC0 uses fixed-phy to connect to a builtin gigabit switch with
fixed link speed as commit 0c72c50f6f93b0c3daa9ea35d89ab3a933c7b5a0
("net-next: mediatek: add fixed-phy support") describes.
3.However, fixed-phy doesn't enable SUPPORTED_Pause & SUPPORTED_Asym_Pause
supported flag on default that would cause mtk_phy_link_adjust() not to
enable flow control setting on GMAC0 properly and cause packet dropped
when high traffic.
Due to these reasons, the patch adds SUPPORTED_Pause & SUPPORTED_Asym_Pause
supported flags on fixed-phy used by the driver to have proper handling on
the both GMAC with the shared common logic.
Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: ethernet: mediatek: fix RMII mode and add REVMII supported by GMAC
The patch fixes up the incorrect setup of reduced MII (RMII) on GMAC
and adds the supplement for the setup of reverse MII (REVMII) on GMAC
, and rearranges the error handling for invalid PHY argument.
Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Add missing platform_set_drvdata() in tps65217_charger_probe(), otherwise
calling platform_get_drvdata() in remove returns NULL.
This is detected by Coccinelle semantic patch.
Fixes: 3636859b280c ("power_supply: Add support for tps65217-charger") Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
I feel like we should maybe return -ENOMEM or -ENOBUFS, but I'm not sure
userspace is equipped to handle that. Anyway, this is better than a GPF
and looks somewhat consistent with other tipc_msg_create() callers.
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 15 Aug 2016 20:48:08 +0000 (13:48 -0700)]
Merge branch 'hv_netvsc-VF-removal-fixes'
Vitaly Kuznetsov says:
====================
hv_netvsc: fixes for VF removal path
Kernel crash is reported after VF is removed and detached from netvsc
device. Turns out we have multiple different (but related) issues on the
VF removal path which I'm trying to address with PATCHes 2-5 of this
series. PATCH1 is required to support the change.
Changes since v1:
- Re-arrange patches in the series to not introduce new issues [David Miller]
- Add PATCH5 which fixes a new issue I discovered while testing.
- Add Haiyang' A-b tags to PATCH1-4
With regards to Stephen's suggestion: I believe that switching to using RCU
and eliminating vf_use_cnt/vf_inject is the right thing to do long-term, we
can either put this on top of this series or do it later in net-next.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Vitaly Kuznetsov [Mon, 15 Aug 2016 15:48:43 +0000 (17:48 +0200)]
hv_netvsc: fix bonding devices check in netvsc_netdev_event()
Bonding driver sets IFF_BONDING on both master (the bonding device) and
slave (the real NIC) devices and in netvsc_netdev_event() we want to skip
master devices only. Currently, there is an uncertainty when a slave
interface is removed: if bonding module comes first in netdev_chain it
clears IFF_BONDING flag on the netdev and netvsc_netdev_event() correctly
handles NETDEV_UNREGISTER event, but in case netvsc comes first on the
chain it sees the device with IFF_BONDING still attached and skips it. As
we still hold vf_netdev pointer to the device we crash on the next inject.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Acked-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vitaly Kuznetsov [Mon, 15 Aug 2016 15:48:42 +0000 (17:48 +0200)]
hv_netvsc: protect module refcount by checking net_device_ctx->vf_netdev
We're not guaranteed to see NETDEV_REGISTER/NETDEV_UNREGISTER notifications
only once per VF but we increase/decrease module refcount unconditionally.
Check vf_netdev to make sure we don't take/release it twice. We presume
that only one VF per netvsc device may exist.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Acked-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vitaly Kuznetsov [Mon, 15 Aug 2016 15:48:41 +0000 (17:48 +0200)]
hv_netvsc: reset vf_inject on VF removal
We reset vf_inject on VF going down (netvsc_vf_down()) but we don't on
VF removal (netvsc_unregister_vf()) so vf_inject stays 'true' while
vf_netdev is already NULL and we're trying to inject packets into NULL
net device in netvsc_recv_callback() causing kernel to crash.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Acked-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vitaly Kuznetsov [Mon, 15 Aug 2016 15:48:40 +0000 (17:48 +0200)]
hv_netvsc: avoid deadlocks between rtnl lock and vf_use_cnt wait
Here is a deadlock scenario:
- netvsc_vf_up() schedules netvsc_notify_peers() work and quits.
- netvsc_vf_down() runs before netvsc_notify_peers() gets executed. As it
is being executed from netdev notifier chain we hold rtnl lock when we
get here.
- we enter while (atomic_read(&net_device_ctx->vf_use_cnt) != 0) loop and
wait till netvsc_notify_peers() drops vf_use_cnt.
- netvsc_notify_peers() starts on some other CPU but netdev_notify_peers()
will hang on rtnl_lock().
- deadlock!
Instead of introducing additional synchronization I suggest we drop
gwrk.dwrk completely and call NETDEV_NOTIFY_PEERS directly. As we're
acting under rtnl lock this is legitimate.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Acked-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vitaly Kuznetsov [Mon, 15 Aug 2016 15:48:39 +0000 (17:48 +0200)]
hv_netvsc: don't lose VF information
struct netvsc_device is not suitable for storing VF information as this
structure is being destroyed on MTU change / set channel operation (see
rndis_filter_device_remove()). Move all VF related stuff to struct
net_device_context which is persistent.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Acked-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Simon Horman [Mon, 15 Aug 2016 11:06:24 +0000 (13:06 +0200)]
gre: set inner_protocol on xmit
Ensure that the inner_protocol is set on transmit so that GSO segmentation,
which relies on that field, works correctly.
This is achieved by setting the inner_protocol in gre_build_header rather
than each caller of that function. It ensures that the inner_protocol is
set when gre_fb_xmit() is used to transmit GRE which was not previously the
case.
I have observed this is not the case when OvS transmits GRE using
lwtunnel metadata (which it always does).
Fixes: 38720352412a ("gre: Use inner_proto to obtain inner header protocol") Cc: Pravin Shelar <pshelar@ovn.org> Acked-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Mon, 15 Aug 2016 19:36:31 +0000 (12:36 -0700)]
Merge tag 'iommu-fixes-v4.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU fixes from Joerg Roedel:
- Some functions defined in a header file for the mediatek driver were
not marked inline. Fix that oversight.
- Fix a potential crash in the ARM64 dma-mapping code when freeing a
partially initialized domain.
- Another fix for ARM64 dma-mapping to respect IOMMU mapping
constraints when allocating IOVA addresses.
* tag 'iommu-fixes-v4.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/dma: Respect IOMMU aperture when allocating
iommu/dma: Don't put uninitialised IOVA domains
iommu/mediatek: Mark static functions in headers inline
Lorenzo Colitti [Fri, 12 Aug 2016 16:13:38 +0000 (01:13 +0900)]
net: ipv6: Fix ping to link-local addresses.
ping_v6_sendmsg does not set flowi6_oif in response to
sin6_scope_id or sk_bound_dev_if, so it is not possible to use
these APIs to ping an IPv6 address on a different interface.
Instead, it sets flowi6_iif, which is incorrect but harmless.
Stop setting flowi6_iif, and support various ways of setting oif
in the same priority order used by udpv6_sendmsg.
Tested: https://android-review.googlesource.com/#/c/254470/ Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
roundup_pow_of_two() is undefined when called with an argument of 0, so
let's avoid the call and just fall back to ht->p.min_size (which should
never be smaller than HASH_MIN_SIZE).
Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
Vincent [Sun, 14 Aug 2016 13:38:29 +0000 (15:38 +0200)]
mlxsw: spectrum_router: Fix use after free
In mlxsw_sp_router_fib4_add_info_destroy(), the fib_entry pointer is used
after it has been freed by mlxsw_sp_fib_entry_destroy(). Use a temporary
variable to fix this.
Fixes: 61c503f976b5449e ("mlxsw: spectrum_router: Implement fib4 add/del switchdev obj ops") Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net> Cc: Jiri Pirko <jiri@mellanox.com> Acked-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The failure happens when allocating the spinlock array.
Even with GFP_KERNEL its unlikely for such a large allocation
to succeed.
Thomas Graf pointed me at inet_ehash_locks_alloc(), so in addition
to adding NOWARN for atomic allocations this also makes the bucket-array
sizing more conservative.
In commit 095dc8e0c3686 ("tcp: fix/cleanup inet_ehash_locks_alloc()"),
Eric Dumazet says: "Budget 2 cache lines per cpu worth of 'spinlocks'".
IOW, consider size needed by a single spinlock when determining
number of locks per cpu. So with 64 byte per cacheline and 4 byte per
spinlock this gives 32 locks per cpu.
Resulting size of the lock-array (sizeof(spinlock) == 4):
Reported-by: Sander Eikelenboom <linux@eikelenboom.it> Suggested-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Mon, 15 Aug 2016 02:01:31 +0000 (19:01 -0700)]
Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux
Pull thermal updates from Zhang Rui:
- Fix a race condition when updating cooling device, which may lead to
a situation where a thermal governor never updates the cooling
device. From Michele Di Giorgio.
- Fix a zero division error when disabling the forced idle injection
from the intel powerclamp. From Petr Mladek.
- Add suspend/resume callback for intel_pch_thermal thermal driver.
From Srinivas Pandruvada.
- Another two fixes for clocking cooling driver and hwmon sysfs I/F.
From Michele Di Giorgio and Kuninori Morimoto.
[ Hmm. That suspend/resume callback for intel_pch_thermal doesn't look
like a fix, but I'm letting it slide.. - Linus ]
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
thermal: clock_cooling: Fix missing mutex_init()
thermal: hwmon: EXPORT_SYMBOL_GPL for thermal hwmon sysfs
thermal: fix race condition when updating cooling device
thermal/powerclamp: Prevent division by zero when counting interval
thermal: intel_pch_thermal: Add suspend/resume callback
Linus Torvalds [Mon, 15 Aug 2016 01:54:37 +0000 (18:54 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Pull m68knommu fix from Greg Ungerer:
"This contains only a single fix for a register corruption problem on
certain types of m68k flat format binaries"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68knommu: fix user a5 register being overwritten
Linus Torvalds [Sun, 14 Aug 2016 02:39:38 +0000 (19:39 -0700)]
Merge tag 'fixes-for-linus-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull h8300 and unicore32 architecture fixes from Guenter Roeck:
"Two patches to fix h8300 and unicore32 builds.
unicore32 builds have been broken since v4.6. The fix has been
available in -next since March of this year.
h8300 builds have been broken since the last commit window. The fix
has been available in -next since June of this year"
* tag 'fixes-for-linus-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
h8300: Add missing include file to asm/io.h
unicore32: mm: Add missing parameter to arch_vma_access_permitted
projects / linux-beck.git / log