David S. Miller [Sun, 11 Sep 2016 03:53:56 +0000 (20:53 -0700)]
Merge branch 'act_tunnel_key'
Hadar Hen Zion says:
====================
net/sched: ip tunnel metadata set/release/classify by using TC
This patchset introduces ip tunnel manipulation support using the TC subsystem.
In the decap flow, it enables the user to redirect packets from a shared tunnel
device and classify by outer and inner headers. The outer headers are extracted
from the metadata and used by the flower filter. A new action act_tunnel_key,
releases the metadata.
In the encap flow, act_tunnel_key creates a metadata object to be used by the
shared tunnel device. The actual redirection to the tunnel device is done using
act_mirred.
For example:
$ tc qdisc add dev vnet0 ingress
$ tc filter add dev vnet0 protocol ip parent ffff: \
flower \
ip_proto 1 \
action tunnel_key set \
src_ip 11.11.0.1 \
dst_ip 11.11.0.2 \
id 11 \
action mirred egress redirect dev vxlan0
$ tc qdisc add dev vxlan0 ingress
$ tc filter add dev vxlan0 protocol ip parent ffff: \
flower \
enc_src_ip 11.11.0.2 \
enc_dst_ip 11.11.0.1 \
enc_key_id 11 \
action tunnel_key release \
action mirred egress redirect dev vnet0
Amir & Hadar
Changes from V6:
- Add kfree_rcu to tunnel_key_release function
- Use reverse Christmas tree order in tunnel_key_init function
Changes from V5:
- Add __rcu notation to struct tcf_tunnel_key_params in struct tcf_tunnel_key
- Fix indentation in include/net/dst_metadata.h
- Fix syntx error in commit message
Changes from V4:
- Fix tunnel_key_init function error flow.
- Add 'action' variable to struct tcf_tunnel_key_params and use it instead of
tcf_action variable which is not protected by rcu lock.
Changes from V3:
- Use percpu stats
- No spinlock on datapatch - protecting parameters with rcu
- Fix buggy handling of set/release dst
- Use nla_get_in_addr and nla_put_in_addr
- Fix change logs
- Pass in6_addr by pointer
- Rename utility functions to start with double underscore
Changes from V2:
- Use union in struct fl_flow_key for enc_ipv6 and enc_ipv4.
- Rename functions _ip_tun_rx_dst and _ipv6_tun_rx_dst to _ip_tun_set_dst and
_ipv6_tun_set_dst accordingly.
- Remove local parameter 'encapdecap' from tunnel_key_init function.
- Don't copy in6_addr values in tunnel_key_dump_addresses function, use pointers.
Changes from V1:
- More cleanups to key32_to_tunnel_id() and tunnel_id_to_key32()
- IPv6 Support added
- Set TUNNEL_KEY flag to make GRE work
- Handle zero tunnel id properly in act_tunnel_key
- Don't leave junk in decap action
- Fix bug in act_tunnel_key initialization where (exists & ocr) is true
- Remove BUG() from code
- Rename action to tunnel_key
- Improve grep-ability of code
- Reuse code from ip_tun_rx_dst() and ipv6_tun_rx_dst()
Changes from RFC:
- Add a new action instead of making mirred too complex
- No need to specify UDP port in action - it is already in the tunnel device
configuration
- Added a decap operation to drop tunnel metadata
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Amir Vadai [Thu, 8 Sep 2016 13:23:48 +0000 (16:23 +0300)]
net/sched: Introduce act_tunnel_key
This action could be used before redirecting packets to a shared tunnel
device, or when redirecting packets arriving from a such a device.
The action will release the metadata created by the tunnel device
(decap), or set the metadata with the specified values for encap
operation.
For example, the following flower filter will forward all ICMP packets
destined to 11.11.11.2 through the shared vxlan device 'vxlan0'. Before
redirecting, a metadata for the vxlan tunnel is created using the
tunnel_key action and it's arguments:
$ tc filter add dev net0 protocol ip parent ffff: \
flower \
ip_proto 1 \
dst_ip 11.11.11.2 \
action tunnel_key set \
src_ip 11.11.0.1 \
dst_ip 11.11.0.2 \
id 11 \
action mirred egress redirect dev vxlan0
Signed-off-by: Amir Vadai <amir@vadai.me> Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Reviewed-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Amir Vadai [Thu, 8 Sep 2016 13:23:47 +0000 (16:23 +0300)]
net/sched: cls_flower: Classify packet in ip tunnels
Introduce classifying by metadata extracted by the tunnel device.
Outer header fields - source/dest ip and tunnel id, are extracted from
the metadata when classifying.
For example, the following will add a filter on the ingress Qdisc of shared
vxlan device named 'vxlan0'. To forward packets with outer src ip
11.11.0.2, dst ip 11.11.0.1 and tunnel id 11. The packets will be
forwarded to tap device 'vnet0' (after metadata is released):
The action tunnel_key, will be introduced in the next patch in this
series.
Signed-off-by: Amir Vadai <amir@vadai.me> Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Amir Vadai [Thu, 8 Sep 2016 13:23:46 +0000 (16:23 +0300)]
net/dst: Utility functions to build dst_metadata without supplying an skb
Extract __ip_tun_set_dst() and __ipv6_tun_set_dst() out of
ip_tun_rx_dst() and ipv6_tun_rx_dst(), to be used without supplying an
skb.
Signed-off-by: Amir Vadai <amir@vadai.me> Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Amir Vadai [Thu, 8 Sep 2016 13:23:45 +0000 (16:23 +0300)]
net/ip_tunnels: Introduce tunnel_id_to_key32() and key32_to_tunnel_id()
Add utility functions to convert a 32 bits key into a 64 bits tunnel and
vice versa.
These functions will be used instead of cloning code in GRE and VXLAN,
and in tc act_iptunnel which will be introduced in a following patch in
this patchset.
Signed-off-by: Amir Vadai <amir@vadai.me> Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Reviewed-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Acked-by: Jiri Benc <jbenc@redhat.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Markus Elfring [Fri, 9 Sep 2016 18:40:16 +0000 (20:40 +0200)]
ATM-iphase: Use kmalloc_array() in tx_init()
* Multiplications for the size determination of memory allocations
indicated that array data structures should be processed.
Thus use the corresponding function "kmalloc_array".
This issue was detected by using the Coccinelle software.
* Replace the specification of data types by pointer dereferences
to make the corresponding size determination a bit safer according to
the Linux coding style convention.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 10 Sep 2016 03:51:22 +0000 (20:51 -0700)]
Merge branch 'alx-msix'
Tobias Regnery says:
====================
alx: add msi-x support
This patchset adds msi-x support to the alx driver. It is a preparatory
series for multi queue support, which I am currently working on. As there
is no advantage over msi interrupts without multi queue support, msi-x
interrupts are disabled by default. In order to test for regressions, a
new module parameter is added to enable msi-x interrupts.
Based on information of the downstream driver at github.com/qca/alx
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add msi-x support to the alx driver. This is in preparation for multi queue
support.
msi-x interrupts are disabled by default because without multi queue support
there is no advantage over msi interrupts. The performance numbers observed
with iperf stay the same.
Based on information of the downstream driver at github.com/qca/alx
Signed-off-by: Tobias Regnery <tobias.regnery@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce a new flag field for the advanced interrupt capatibilities and add
new functions to enable and disable msi interrupts. These functions will be
extended later to cover msi-x interrupts.
We enable msi interrupts earlier in alx_init_intr because with msi-x and multi
queue support the number of queues must be set before we allocate resources for
the rx and tx paths.
Signed-off-by: Tobias Regnery <tobias.regnery@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
We get a few warnings when building kernel with W=1:
drivers/net/ethernet/qlogic/qed/qed_l2.c:112:5: warning: no previous prototype for 'qed_sp_vport_start' [-Wmissing-prototypes]
drivers/net/ethernet/qlogic/qed/qed_sriov.c:110:6: warning: no previous prototype for 'qed_iov_is_valid_vfid' [-Wmissing-prototypes]
drivers/net/ethernet/qlogic/qed/qed_sriov.c:188:5: warning: no previous prototype for 'qed_iov_post_vf_bulletin' [-Wmissing-prototypes]
drivers/net/ethernet/qlogic/qed/qed_sriov.c:578:6: warning: no previous prototype for 'qed_iov_set_vfs_to_disable' [-Wmissing-prototypes]
drivers/net/ethernet/qlogic/qed/qed_sriov.c:1135:28: warning: no previous prototype for 'qed_iov_get_public_vf_info' [-Wmissing-prototypes]
drivers/net/ethernet/qlogic/qed/qed_sriov.c:1148:6: warning: no previous prototype for 'qed_iov_clean_vf' [-Wmissing-prototypes]
drivers/net/ethernet/qlogic/qed/qed_sriov.c:2444:5: warning: no previous prototype for 'qed_iov_chk_ucast' [-Wmissing-prototypes]
drivers/net/ethernet/qlogic/qed/qed_sriov.c:2762:5: warning: no previous prototype for 'qed_iov_vf_flr_cleanup' [-Wmissing-prototypes]
....
In fact, these functions are only used in the file in which they are
declared and don't need a declaration, but can be made static.
so this patch marks these functions with 'static'.
Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 10 Sep 2016 02:36:04 +0000 (19:36 -0700)]
Merge branch 'bpf-helper-cleanups'
Daniel Borkmann says:
====================
Some BPF helper cleanups
This series contains a couple of misc cleanups and improvements
for BPF helpers. For details please see individual patches. We
let this also sit for a few days with Fengguang's kbuild test
robot, and there were no issues seen (besides one false positive,
see last one for details).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Fri, 9 Sep 2016 00:45:31 +0000 (02:45 +0200)]
bpf: add BPF_CALL_x macros for declaring helpers
This work adds BPF_CALL_<n>() macros and converts all the eBPF helper functions
to use them, in a similar fashion like we do with SYSCALL_DEFINE<n>() macros
that are used today. Motivation for this is to hide all the register handling
and all necessary casts from the user, so that it is done automatically in the
background when adding a BPF_CALL_<n>() call.
This makes current helpers easier to review, eases to write future helpers,
avoids getting the casting mess wrong, and allows for extending all helpers at
once (f.e. build time checks, etc). It also helps detecting more easily in
code reviews that unused registers are not instrumented in the code by accident,
breaking compatibility with existing programs.
BPF_CALL_<n>() internals are quite similar to SYSCALL_DEFINE<n>() ones with some
fundamental differences, for example, for generating the actual helper function
that carries all u64 regs, we need to fill unused regs, so that we always end up
with 5 u64 regs as an argument.
I reviewed several 0-5 generated BPF_CALL_<n>() variants of the .i results and
they look all as expected. No sparse issue spotted. We let this also sit for a
few days with Fengguang's kbuild test robot, and there were no issues seen. On
s390, it barked on the "uses dynamic stack allocation" notice, which is an old
one from bpf_perf_event_output{,_tp}() reappearing here due to the conversion
to the call wrapper, just telling that the perf raw record/frag sits on stack
(gcc with s390's -mwarn-dynamicstack), but that's all. Did various runtime tests
and they were fine as well. All eBPF helpers are now converted to use these
macros, getting rid of a good chunk of all the raw castings.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Fri, 9 Sep 2016 00:45:30 +0000 (02:45 +0200)]
bpf: add own ctx rewriter on ifindex for clsact progs
When fetching ifindex, we don't need to test dev for being NULL since
we're always guaranteed to have a valid dev for clsact programs. Thus,
avoid this test in fast path.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Fri, 9 Sep 2016 00:45:29 +0000 (02:45 +0200)]
bpf: add BPF_SIZEOF and BPF_FIELD_SIZEOF macros
Add BPF_SIZEOF() and BPF_FIELD_SIZEOF() macros to improve the code a bit
which otherwise often result in overly long bytes_to_bpf_size(sizeof())
and bytes_to_bpf_size(FIELD_SIZEOF()) lines. So place them into a macro
helper instead. Moreover, we currently have a BUILD_BUG_ON(BPF_FIELD_SIZEOF())
check in convert_bpf_extensions(), but we should rather make that generic
as well and add a BUILD_BUG_ON() test in all BPF_SIZEOF()/BPF_FIELD_SIZEOF()
users to detect any rewriter size issues at compile time. Note, there are
currently none, but we want to assert that it stays this way.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Fri, 9 Sep 2016 00:45:28 +0000 (02:45 +0200)]
bpf: minor cleanups in helpers
Some minor misc cleanups, f.e. use sizeof(__u32) instead of hardcoding
and in __bpf_skb_max_len(), I missed that we always have skb->dev valid
anyway, so we can drop the unneeded test for dev; also few more other
misc bits addressed here.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Markus Elfring [Thu, 8 Sep 2016 13:43:37 +0000 (15:43 +0200)]
ATM-ForeRunnerHE: Use kmalloc_array() in he_init_group()
* Multiplications for the size determination of memory allocations
indicated that array data structures should be processed.
Thus use the corresponding function "kmalloc_array".
This issue was detected by using the Coccinelle software.
* Replace the specification of data types by pointer dereferences
to make the corresponding size determination a bit safer according to
the Linux coding style convention.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Markus Elfring [Thu, 8 Sep 2016 12:20:17 +0000 (14:20 +0200)]
ATM-ENI: Use kmalloc_array() in eni_start()
* A multiplication for the size determination of a memory allocation
indicated that an array data structure should be processed.
Thus use the corresponding function "kmalloc_array".
This issue was detected by using the Coccinelle software.
* Replace the specification of a data structure by a pointer dereference
to make the corresponding size determination a bit safer according to
the Linux coding style convention.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 10 Sep 2016 02:24:21 +0000 (19:24 -0700)]
Merge tag 'rxrpc-rewrite-20160908' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
David Howells says:
====================
rxrpc: Rewrite data and ack handling
This patch set constitutes the main portion of the AF_RXRPC rewrite. It
consists of five fix/helper patches:
(1) Fix ASSERTCMP's and ASSERTIFCMP's handling of signed values.
(2) Update some protocol definitions slightly.
(3) Use of an hlist for RCU purposes.
(4) Removal of per-call sk_buff accounting (not really needed when skbs
aren't being queued on the main queue).
(5) Addition of a tracepoint to log incoming packets in the data_ready
callback and to log the end of the data_ready callback.
And then there are two patches that form the main part:
(6) Preallocation of resources for incoming calls so that in patch (7) the
data_ready handler can be made to fully instantiate an incoming call
and make it live. This extends through into AFS so that AFS can
preallocate its own incoming call resources.
The preallocation size is capped at the listen() backlog setting - and
that is capped at a sysctl limit which can be set between 4 and 32.
The preallocation is (re)charged either by accepting/rejecting pending
calls or, in the case of AFS, manually. If insufficient preallocation
resources exist, a BUSY packet will be transmitted.
The advantage of using this preallocation is that once a call is set
up in the data_ready handler, DATA packets can be queued on it
immediately rather than the DATA packets being queued for a background
work item to do all the allocation and then try and sort out the DATA
packets whilst other DATA packets may still be coming in and going
either to the background thread or the new call.
(7) Rewrite the handling of DATA, ACK and ABORT packets.
In the receive phase, DATA packets are now held in per-call circular
buffers with deduplication, out of sequence detection and suchlike
being done in data_ready. Since there is only one producer and only
once consumer, no locks need be used on the receive queue.
Received ACK and ABORT packets are now parsed and discarded in
data_ready to recycle resources as fast as possible.
sk_buffs are no longer pulled, trimmed or cloned, but rather the
offset and size of the content is tracked. This particularly affects
jumbo DATA packets which need insertion into the receive buffer in
multiple places. Annotations are kept to track which bit is which.
Packets are no longer queued on the socket receive queue; rather,
calls are queued. Dummy packets to convey events therefore no longer
need to be invented and metadata packets can be discarded as soon as
parsed rather then being pushed onto the socket receive queue to
indicate terminal events.
The preallocation facility added in (6) is now used to set up incoming
calls with very little locking required and no calls to the allocator
in data_ready.
Decryption and verification is now handled in recvmsg() rather than in
a background thread. This allows for the future possibility of
decrypting directly into the user buffer.
With this patch, the code is a lot simpler and most of the mass of
call event and state wangling code in call_event.c is gone.
With this, the majority of the AF_RXRPC rewrite is complete. However,
there are still things to be done, including:
(*) Limit the number of active service calls to prevent an attacker from
filling up a server's memory.
(*) Limit the number of calls on the rebuff-with-BUSY queue.
(*) Transmit delayed/deferred ACKs from recvmsg() if possible, rather than
punting to the background thread. Ideally, the background thread
shouldn't run at all, but data_ready can't call kernel_sendmsg() and
we can't rely on recvmsg() attending to the call in a timely fashion.
(*) Prevent the call at the front of the socket queue from hogging
recvmsg()'s attention if there's a sufficiently continuous supply of
data.
(*) Distribute ICMP errors by connection rather than by call. Possibly
parse the ICMP packet to try and pin down the exact connection and
call.
(*) Encrypt/decrypt directly between user buffers and socket buffers where
possible.
(*) IPv6.
(*) Service ID upgrade. This is a facility whereby a special flag bit is
set in the DATA packet header when making a call that tells the server
that it is allowed to change the service ID to an upgraded one and
reply with an equivalent call from the upgraded service.
This is used, for example, to override certain AFS calls so that IPv6
addresses can be returned.
(*) Allow userspace to preallocate call user IDs for incoming calls.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Thu, 8 Sep 2016 09:04:24 +0000 (10:04 +0100)]
via-velocity: remove null pointer check on array tdinfo->skb_dma
tdinfo->skb_dma is a 7 element array of dma_addr_t hence cannot be
null, so the pull pointer check on tdinfo->skb_dma is redundant.
Remove it.
Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
We get 1 warning when building kernel with W=1:
drivers/net/ethernet/qlogic/qede/qede_main.c:2113:5: warning: no previous prototype for 'qede_set_features' [-Wmissing-prototypes]
In fact, this function is only used in the file in which it is
declared and don't need a declaration, but can be made static.
so this patch marks this function with 'static'.
Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Acked-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The netdevice type structure for macsec was being defined but never used.
To set the network device type the macro SET_NETDEV_DEVTYPE must be called.
Compile tested only, I don't use macsec.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
This structure is defined but never used. Flagged with W=1
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 9 Sep 2016 23:50:23 +0000 (16:50 -0700)]
Merge branch 'newroute-creation-flags'
Guillaume Nault says:
====================
ip: fix creation flags reported in RTM_NEWROUTE events
Netlink messages sent to user-space upon RTM_NEWROUTE events have their
nlmsg_flags field inconsistently set. While the NLM_F_REPLACE and
NLM_F_APPEND bits are correctly handled, NLM_F_CREATE and NLM_F_EXCL
are always 0.
This series sets the NLM_F_CREATE and NLM_F_EXCL bits when applicable,
for IPv4 and IPv6.
Since IPv6 ignores the NLM_F_APPEND flags in requests, this flag isn't
reported in RTM_NEWROUTE IPv6 events. This keeps IPv6 internal
consistency (same flag semantic for user requests and kernel events) at
the cost of bringing different flag interpretation for IPv4 and IPv6.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
ipv6: report NLM_F_CREATE and NLM_F_EXCL flags in RTM_NEWROUTE events
Since commit 37a1d3611c12 ("ipv6: include NLM_F_REPLACE in route
replace notifications"), RTM_NEWROUTE notifications have their
NLM_F_REPLACE flag set if the new route replaced a preexisting one.
However, other flags aren't set.
This patch reports the missing NLM_F_CREATE and NLM_F_EXCL flag bits.
NLM_F_APPEND is not reported, because in ipv6 a NLM_F_CREATE request
is interpreted as an append request (contrary to ipv4, "prepend" is not
supported, so if NLM_F_EXCL is not set then NLM_F_APPEND is implicit).
As a result, the possible flag combination can now be reported
(iproute2's terminology into parentheses):
* NLM_F_CREATE | NLM_F_EXCL: route didn't exist, exclusive creation
("add").
* NLM_F_CREATE: route did already exist, new route added after
preexisting ones ("append").
* NLM_F_REPLACE: route did already exist, new route replaced the
first preexisting one ("change").
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
ipv4: fix value of ->nlmsg_flags reported in RTM_NEWROUTE events
fib_table_insert() inconsistently fills the nlmsg_flags field in its
notification messages.
Since commit b8f558313506 ("[RTNETLINK]: Fix sending netlink message
when replace route."), the netlink message has its nlmsg_flags set to
NLM_F_REPLACE if the route replaced a preexisting one.
Then commit a2bb6d7d6f42 ("ipv4: include NLM_F_APPEND flag in append
route notifications") started setting nlmsg_flags to NLM_F_APPEND if
the route matched a preexisting one but was appended.
In other cases (exclusive creation or prepend), nlmsg_flags is 0.
This patch sets ->nlmsg_flags in all situations, preserving the
semantic of the NLM_F_* bits:
* NLM_F_CREATE: a new fib entry has been created for this route.
* NLM_F_EXCL: no other fib entry existed for this route.
* NLM_F_REPLACE: this route has overwritten a preexisting fib entry.
* NLM_F_APPEND: the new fib entry was added after other entries for
the same route.
As a result, the possible flag combination can now be reported
(iproute2's terminology into parentheses):
* NLM_F_CREATE | NLM_F_EXCL: route didn't exist, exclusive creation
("add").
* NLM_F_CREATE | NLM_F_APPEND: route did already exist, new route
added after preexisting ones ("append").
* NLM_F_CREATE: route did already exist, new route added before
preexisting ones ("prepend").
* NLM_F_REPLACE: route did already exist, new route replaced the
first preexisting one ("change").
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Thu, 8 Sep 2016 04:52:56 +0000 (21:52 -0700)]
ipv4: accept u8 in IP_TOS ancillary data
In commit f02db315b8d8 ("ipv4: IP_TOS and IP_TTL can be specified as
ancillary data") Francesco added IP_TOS values specified as integer.
However, kernel sends to userspace (at recvmsg() time) an IP_TOS value
in a single byte, when IP_RECVTOS is set on the socket.
It can be very useful to reflect all ancillary options as given by the
kernel in a subsequent sendmsg(), instead of aborting the sendmsg() with
EINVAL after Francesco patch.
So this patch extends IP_TOS ancillary to accept an u8, so that an UDP
server can simply reuse same ancillary block without having to mangle
it.
Jesper can then augment
https://github.com/netoptimizer/network-testing/blob/master/src/udp_example02.c
to add TOS reflection ;)
Fixes: f02db315b8d8 ("ipv4: IP_TOS and IP_TTL can be specified as ancillary data") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Francesco Fusco <ffusco@redhat.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The reason why this gets rejected despite a proper test is that we
currently call find_good_pkt_pointers() only in case where we detect
tests like rX > pkt_end, where rX is of type pkt(id=Y,off=Z,r=0) and
derived, for example, from a register of type pkt(id=Y,off=0,r=0)
pointing to skb->data. find_good_pkt_pointers() then fills the range
in the current branch to pkt(id=Y,off=0,r=Z) on success.
For above case, we need to extend that to recognize pkt_end >= rX
pattern and mark the other branch that is taken on success with the
appropriate pkt(id=Y,off=0,r=Z) type via find_good_pkt_pointers().
Since eBPF operates on BPF_JGT (>) and BPF_JGE (>=), these are the
only two practical options to test for from what LLVM could have
generated, since there's no such thing as BPF_JLT (<) or BPF_JLE (<=)
that we would need to take into account as well.
Verifier test cases are also added in this work, one that demonstrates
the mentioned example here and one that tries a bad packet access for
the current/fall-through branch (the one with types pkt(id=X,off=Y,r=0),
pkt(id=X,off=0,r=0)), then a case with good and bad accesses, and two
with both test variants (>, >=).
Fixes: 969bf05eb3ce ("bpf: direct packet access") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Yaogong Wang [Wed, 7 Sep 2016 21:49:28 +0000 (14:49 -0700)]
tcp: use an RB tree for ooo receive queue
Over the years, TCP BDP has increased by several orders of magnitude,
and some people are considering to reach the 2 Gbytes limit.
Even with current window scale limit of 14, ~1 Gbytes maps to ~740,000
MSS.
In presence of packet losses (or reorders), TCP stores incoming packets
into an out of order queue, and number of skbs sitting there waiting for
the missing packets to be received can be in the 10^5 range.
Most packets are appended to the tail of this queue, and when
packets can finally be transferred to receive queue, we scan the queue
from its head.
However, in presence of heavy losses, we might have to find an arbitrary
point in this queue, involving a linear scan for every incoming packet,
throwing away cpu caches.
This patch converts it to a RB tree, to get bounded latencies.
Yaogong wrote a preliminary patch about 2 years ago.
Eric did the rebase, added ofo_last_skb cache, polishing and tests.
Tested with network dropping between 1 and 10 % packets, with good
success (about 30 % increase of throughput in stress tests)
Next step would be to also use an RB tree for the write queue at sender
side ;)
Signed-off-by: Yaogong Wang <wygivan@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Acked-By: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
The userspace counterpart has also seen recent activity on the ovs-dev mailing
lists. There are some new 802.1ad OVS tests being added - also on the ovs-dev
list. This patch series has been tested using the most recent version of
userspace (v3) and tests (v2).
v22 changes:
- merge patch 4 into patch 3
- fix checkpatch.pl errors
- Still some 80 char warnings for long string literals
- refresh pointer after pskb_may_pull()
- refactor vlan nlattr parsing to remove some double checks
- introduce ovs_nla_put_vlan()
- move triple VLAN check to after ethertype serialization
- WARN_ON_ONCE() on triple VLAN and unexpected encap values
Add support for 802.1ad including the ability to push and pop double
tagged vlans. Add support for 802.1ad to netlink parsing and flow
conversion. Uses double nested encap attributes to represent double
tagged vlan. Inner TPID encoded along with ctci in nested attributes.
This is based on Thomas F Herbert's original v20 patch. I made some
small clean ups and bug fixes.
Signed-off-by: Thomas F Herbert <thomasfherbert@gmail.com> Signed-off-by: Eric Garver <e@erig.me> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Garver [Wed, 7 Sep 2016 16:56:58 +0000 (12:56 -0400)]
vlan: Check for vlan ethernet types for 8021.q or 802.1ad
This is to simplify using double tagged vlans. This function allows all
valid vlan ethertypes to be checked in a single function call.
Also replace some instances that check for both ETH_P_8021Q and
ETH_P_8021AD.
Patch based on one originally by Thomas F Herbert.
Signed-off-by: Thomas F Herbert <thomasfherbert@gmail.com> Signed-off-by: Eric Garver <e@erig.me> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Thomas F Herbert <thomasfherbert@gmail.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Lorenzo Colitti [Wed, 7 Sep 2016 15:42:25 +0000 (00:42 +0900)]
net: inet: diag: expose the socket mark to privileged processes.
This adds the capability for a process that has CAP_NET_ADMIN on
a socket to see the socket mark in socket dumps.
Commit a52e95abf772 ("net: diag: allow socket bytecode filters to
match socket marks") recently gave privileged processes the
ability to filter socket dumps based on mark. This patch is
complementary: it ensures that the mark is also passed to
userspace in the socket's netlink attributes. It is useful for
tools like ss which display information about sockets.
Tested: https://android-review.googlesource.com/270210 Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David Howells [Thu, 8 Sep 2016 10:10:12 +0000 (11:10 +0100)]
rxrpc: Rewrite the data and ack handling code
Rewrite the data and ack handling code such that:
(1) Parsing of received ACK and ABORT packets and the distribution and the
filing of DATA packets happens entirely within the data_ready context
called from the UDP socket. This allows us to process and discard ACK
and ABORT packets much more quickly (they're no longer stashed on a
queue for a background thread to process).
(2) We avoid calling skb_clone(), pskb_pull() and pskb_trim(). We instead
keep track of the offset and length of the content of each packet in
the sk_buff metadata. This means we don't do any allocation in the
receive path.
(3) Jumbo DATA packet parsing is now done in data_ready context. Rather
than cloning the packet once for each subpacket and pulling/trimming
it, we file the packet multiple times with an annotation for each
indicating which subpacket is there. From that we can directly
calculate the offset and length.
(4) A call's receive queue can be accessed without taking locks (memory
barriers do have to be used, though).
(5) Incoming calls are set up from preallocated resources and immediately
made live. They can than have packets queued upon them and ACKs
generated. If insufficient resources exist, DATA packet #1 is given a
BUSY reply and other DATA packets are discarded).
(6) sk_buffs no longer take a ref on their parent call.
To make this work, the following changes are made:
(1) Each call's receive buffer is now a circular buffer of sk_buff
pointers (rxtx_buffer) rather than a number of sk_buff_heads spread
between the call and the socket. This permits each sk_buff to be in
the buffer multiple times. The receive buffer is reused for the
transmit buffer.
(2) A circular buffer of annotations (rxtx_annotations) is kept parallel
to the data buffer. Transmission phase annotations indicate whether a
buffered packet has been ACK'd or not and whether it needs
retransmission.
Receive phase annotations indicate whether a slot holds a whole packet
or a jumbo subpacket and, if the latter, which subpacket. They also
note whether the packet has been decrypted in place.
(3) DATA packet window tracking is much simplified. Each phase has just
two numbers representing the window (rx_hard_ack/rx_top and
tx_hard_ack/tx_top).
The hard_ack number is the sequence number before base of the window,
representing the last packet the other side says it has consumed.
hard_ack starts from 0 and the first packet is sequence number 1.
The top number is the sequence number of the highest-numbered packet
residing in the buffer. Packets between hard_ack+1 and top are
soft-ACK'd to indicate they've been received, but not yet consumed.
Four macros, before(), before_eq(), after() and after_eq() are added
to compare sequence numbers within the window. This allows for the
top of the window to wrap when the hard-ack sequence number gets close
to the limit.
Two flags, RXRPC_CALL_RX_LAST and RXRPC_CALL_TX_LAST, are added also
to indicate when rx_top and tx_top point at the packets with the
LAST_PACKET bit set, indicating the end of the phase.
(4) Calls are queued on the socket 'receive queue' rather than packets.
This means that we don't need have to invent dummy packets to queue to
indicate abnormal/terminal states and we don't have to keep metadata
packets (such as ABORTs) around
(5) The offset and length of a (sub)packet's content are now passed to
the verify_packet security op. This is currently expected to decrypt
the packet in place and validate it.
However, there's now nowhere to store the revised offset and length of
the actual data within the decrypted blob (there may be a header and
padding to skip) because an sk_buff may represent multiple packets, so
a locate_data security op is added to retrieve these details from the
sk_buff content when needed.
(6) recvmsg() now has to handle jumbo subpackets, where each subpacket is
individually secured and needs to be individually decrypted. The code
to do this is broken out into rxrpc_recvmsg_data() and shared with the
kernel API. It now iterates over the call's receive buffer rather
than walking the socket receive queue.
Additional changes:
(1) The timers are condensed to a single timer that is set for the soonest
of three timeouts (delayed ACK generation, DATA retransmission and
call lifespan).
(2) Transmission of ACK and ABORT packets is effected immediately from
process-context socket ops/kernel API calls that cause them instead of
them being punted off to a background work item. The data_ready
handler still has to defer to the background, though.
(3) A shutdown op is added to the AF_RXRPC socket so that the AFS
filesystem can shut down the socket and flush its own work items
before closing the socket to deal with any in-progress service calls.
Future additional changes that will need to be considered:
(1) Make sure that a call doesn't hog the front of the queue by receiving
data from the network as fast as userspace is consuming it to the
exclusion of other calls.
(2) Transmit delayed ACKs from within recvmsg() when we've consumed
sufficiently more packets to avoid the background work item needing to
run.
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Thu, 8 Sep 2016 10:10:12 +0000 (11:10 +0100)]
rxrpc: Preallocate peers, conns and calls for incoming service requests
Make it possible for the data_ready handler called from the UDP transport
socket to completely instantiate an rxrpc_call structure and make it
immediately live by preallocating all the memory it might need. The idea
is to cut out the background thread usage as much as possible.
[Note that the preallocated structs are not actually used in this patch -
that will be done in a future patch.]
If insufficient resources are available in the preallocation buffers, it
will be possible to discard the DATA packet in the data_ready handler or
schedule a BUSY packet without the need to schedule an attempt at
allocation in a background thread.
To this end:
(1) Preallocate rxrpc_peer, rxrpc_connection and rxrpc_call structs to a
maximum number each of the listen backlog size. The backlog size is
limited to a maxmimum of 32. Only this many of each can be in the
preallocation buffer.
(2) For userspace sockets, the preallocation is charged initially by
listen() and will be recharged by accepting or rejecting pending
new incoming calls.
(3) For kernel services {,re,dis}charging of the preallocation buffers is
handled manually. Two notifier callbacks have to be provided before
kernel_listen() is invoked:
(a) An indication that a new call has been instantiated. This can be
used to trigger background recharging.
(b) An indication that a call is being discarded. This is used when
the socket is being released.
A function, rxrpc_kernel_charge_accept() is called by the kernel
service to preallocate a single call. It should be passed the user ID
to be used for that call and a callback to associate the rxrpc call
with the kernel service's side of the ID.
(4) Discard the preallocation when the socket is closed.
(5) Temporarily bump the refcount on the call allocated in
rxrpc_incoming_call() so that rxrpc_release_call() can ditch the
preallocation ref on service calls unconditionally. This will no
longer be necessary once the preallocation is used.
Note that this does not yet control the number of active service calls on a
client - that will come in a later patch.
A future development would be to provide a setsockopt() call that allows a
userspace server to manually charge the preallocation buffer. This would
allow user call IDs to be provided in advance and the awkward manual accept
stage to be bypassed.
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Thu, 8 Sep 2016 10:10:11 +0000 (11:10 +0100)]
rxrpc: Update protocol definitions slightly
Update the protocol definitions in include/rxrpc/packet.h slightly:
(1) Get rid of RXRPC_PROCESS_MAXCALLS as it's redundant (same as
RXRPC_MAXCALLS).
(2) In struct rxrpc_jumbo_header, put _rsvd in a union with a field called
cksum to match struct rxrpc_wire_header.
(3) Provide RXRPC_JUMBO_SUBPKTLEN which is the total of the amount of data
in a non-terminal subpacket plus the following secondary header for
the next packet included in the jumbo packet.
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Thu, 8 Sep 2016 10:10:11 +0000 (11:10 +0100)]
rxrpc: Fix ASSERTCMP and ASSERTIFCMP to handle signed values
Fix ASSERTCMP and ASSERTIFCMP to be able to handle signed values by casting
both parameters to the type of the first before comparing. Without this,
both values are cast to unsigned long, which means that checks for values
less than zero don't work.
The downside of this is that the state enum values in struct rxrpc_call and
struct rxrpc_connection can't be bitfields as __typeof__ can't handle them.
Signed-off-by: David Howells <dhowells@redhat.com>
The following patch set contains an error recovery feature and a few
bug fixes. Please consider applying this to the net-next tree. Thanks.
Patch-1 Supports HW error recovery in Skyhawk/BEx adapters
Patch-2 Fixes driver unload to issue function reset FW command
Patch-3 Avoids issuing GET_EXT_FAT_CAPABILITIES command for VFs
Patch-4 Avoids redundant addition of mac address in HW
Patch-5 Fixes mac address collision in some configurations
Patch-6 Updates driver version
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
be2net: Fix mac address collision in some configurations
If the device mac address is updated using ndo_set_mac_address(),
while the same mac address is already programmed, the driver does not
detect this condition if its netdev->dev_addr has been changed. The
driver tries to add the same mac address resulting in mac address
collision error. This has been observed in bonding mode-5 configuration.
To fix this, store the mac address configured in HW in the adapter
structure. Use this to compare against the new address being updated
to avoid collision.
Signed-off-by: Suresh Reddy <Suresh.Reddy@broadcom.com> Signed-off-by: Sathya Perla <sathya.perla@broadcom.com> Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
be2net: Avoid redundant addition of mac address in HW
If a mac address is added to the uc_list and later the same mac address
is added via ndo_set_mac_address() or vice versa, the driver does not
detect this condition and tries to add it again. This results in a mac
address collision error when the FW rejects it.
Fix this by checking if the given mac address is present in uc_list while
setting the device mac address and vice versa. Similarly skip deletion if
the address is still in use in the other form.
Signed-off-by: Suresh Reddy <Suresh.Reddy@broadcom.com> Signed-off-by: Sathya Perla <sathya.perla@broadcom.com> Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
be2net: Add privilege level check for OPCODE_COMMON_GET_EXT_FAT_CAPABILITIES SLI cmd.
Driver issues OPCODE_COMMON_GET_EXT_FAT_CAPABILITIES cmd during init which
when issued by VFs results in the logging of a cmd failure message since
they don't have the required privilege for this cmd. Fix by checking
privilege before issuing the cmd.
Also fixed typo in CAPABILITIES.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
be2net: Issue COMMON_RESET_FUNCTION cmd during driver unload
As per SLI guideline, drivers need to issue COMMON_RESET_FUNCTION SLI
cmd during driver unload to clean up any non-persistent state
information.
Issue this cmd only if VFs are not assigned to VMs as it is possible
for PF driver to unload while it\'s VF remains functional and assigned
to a VM.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
be2net: Support UE recovery in BEx/Skyhawk adapters
This patch supports recovery from UEs caused due to Transient Parity
Errors (TPE), in BE2, BE3 and Skyhawk adapters. This change avoids
system reboot when such errors occur. The driver recovers from these
errors such that the adapter resumes full operational status as prior
to the UE.
Following is the list of changes in the driver to support this:
o The driver registers its UE recoverable capability with ARM FW at init
time. This also allows the driver to know if the feature is supported in
the FW.
o As the UE recovery requires precise time bound processing, the driver
creates its own error recovery work queue with a single worker thread (per
module, shared across functions).
o Each function runs an error detection task at an interval of 1 second as
required by the FW. The error detection logic already exists for BEx/SH,
but it now runs in the context of a separate worker thread.
o When an error is detected by the task, if it is recoverable, the PF0
driver instance initiates a soft reset, while other PF driver instances
wait for the reset to complete and the chip to become ready. Once
the chip is ready, all driver instances including PF0, resume to
reinitialize the respective functions.
o The PF0 driver checks for some recovery criteria, to determine if the
recovery can be initiated. If the criteria is not met, the PF0 driver does
not initiate a soft reset, it retains the existing behavior to stop
further processing and requires a reboot to get the chip to operational
state again.
o To allow each function to share the workq, while also making progress in
its recovery process, a per-function recovery state machine is used.
The per-function tasks avoid blocking operations like msleep() while in
this state machine (until reinit state) and instead reschedule for the
required delay.
o With these changes, the existing error recovery code for Lancer also
runs in the context of the new worker thread.
Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: smsc911x: request and deassert optional RESET GPIO
On some systems (such as the Qualcomm APQ8060 Dragonboard) the
RESET signal of the SMSC911x is not pulled up by a resistor (or
the internal pull-up that will pull it up if the pin is not
even connected) but instead connected to a GPIO line, so that
the operating system must explicitly deassert RESET before use.
Support this in the SMSC911x driver so this ethernet connector
can be used on such targets.
Notice that we request the line to go logical low (deassert)
whilst the line on the actual component is active low. This
is managed in the respective hardware description when
specifying the GPIO line with e.g. device tree or ACPI. With
device tree it looks like this in one case:
reset-gpios = <&tlmm 30 GPIO_ACTIVE_LOW>;
Which means that logically requesting the RESET line to be
deasserted will result in the line being driven high, taking
the device out of reset.
Cc: Jeremy Linton <jeremy.linton@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Jeremy Linton <jeremy.linton@arm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
- An optional GPIO line for releasing the RESET signal to the
SMSC911x devices
- An optional PME (power management event) interrupt line that
can be utilized to wake up the system on network activity.
This signal exist on all the SMSC911x devices, it is just not
very often routed.
Both these lines are routed to the SoC on the Qualcomm APQ8060
Dragonboard and thus needs to be bound in the device tree.
Cc: devicetree@vger.kernel.org Cc: Jeremy Linton <jeremy.linton@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 8 Sep 2016 00:47:00 +0000 (17:47 -0700)]
Merge branch 'qed-debug-data-collection'
Tomer Tayar says:
====================
qed*: Debug data collection
This patch series adds the support of debug data collection in the qed driver,
and the means to extract it in the qede driver via the get_regs operation.
Changes from V1:
- Respin of the series after rebasing next-next.
- Remove the first patch as it seems that its V1 version was already applied
(commit '4102426f9b7b3627c8c23a54d70363e81c93f9b7').
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
qed*: Add support for the ethtool get_regs operation
Signed-off-by: Tomer Tayar <Tomer.Tayar@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds the support for dumping and formatting the HW/FW debug data.
Signed-off-by: Tomer Tayar <Tomer.Tayar@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Oliver Neukum [Wed, 7 Sep 2016 13:27:09 +0000 (15:27 +0200)]
kaweth: remove obsolete debugging statements
SOme statements in the driver only served to inform
which functions were entered. Ftrace can do that just as good without
needing memory. Remove the statements.
Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
We get 4 warnings when building kernel with W=1:
drivers/net/ethernet/qlogic/qed/qed_selftest.c:6:5: warning: no previous prototype for 'qed_selftest_memory' [-Wmissing-prototypes]
drivers/net/ethernet/qlogic/qed/qed_selftest.c:19:5: warning: no previous prototype for 'qed_selftest_interrupt' [-Wmissing-prototypes]
drivers/net/ethernet/qlogic/qed/qed_selftest.c:32:5: warning: no previous prototype for 'qed_selftest_register' [-Wmissing-prototypes]
drivers/net/ethernet/qlogic/qed/qed_selftest.c:55:5: warning: no previous prototype for 'qed_selftest_clock' [-Wmissing-prototypes]
In fact, these functions are declared in qed_selftest.h, so this patch
add missing header dependencies.
Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Acked-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Lorenzo Colitti [Wed, 7 Sep 2016 04:38:35 +0000 (13:38 +0900)]
net: diag: make udp_diag_destroy work for mapped addresses.
udp_diag_destroy does look up the IPv4 UDP hashtable for mapped
addresses, but it gets the IPv4 address to look up from the
beginning of the IPv6 address instead of the end.
Tested: https://android-review.googlesource.com/269874 Fixes: 5d77dca82839 ("net: diag: support SOCK_DESTROY for UDP sockets") Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
netlink: don't forget to release a rhashtable_iter structure
This bug was detected by kmemleak:
unreferenced object 0xffff8804269cc3c0 (size 64):
comm "criu", pid 1042, jiffies 4294907360 (age 13.713s)
hex dump (first 32 bytes):
a0 32 cc 2c 04 88 ff ff 00 00 00 00 00 00 00 00 .2.,............
00 01 00 00 00 00 ad de 00 02 00 00 00 00 ad de ................
backtrace:
[<ffffffff8184dffa>] kmemleak_alloc+0x4a/0xa0
[<ffffffff8124720f>] kmem_cache_alloc_trace+0x10f/0x280
[<ffffffffa02864cc>] __netlink_diag_dump+0x26c/0x290 [netlink_diag]
v2: don't remove a reference on a rhashtable_iter structure to
release it from netlink_diag_dump_done
Cc: Herbert Xu <herbert@gondor.apana.org.au> Fixes: ad202074320c ("netlink: Use rhashtable walk interface in diag dump") Signed-off-by: Andrei Vagin <avagin@openvz.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
Here's a set of mostly small patches leading up to one big one.
The big patch at the end of the series overhauls how rxrpc_call refcounting
is handled, making it more sane so that calls bound to user IDs are _only_
released from socket operations or kernel API functions. Further, the
patch stops calls from holding refs on their parent socket - which can
prevent the socket from being cleaned up.
The second largest patch improves the call tracking tracepoint by providing
extra information about the situation in which gets and puts occur. This
allows distinctions to be drawn between refs held by the socket user ID
tree, refs held by the work queue (to be implemented by a future patch) and
other refs.
The other patches include a couple of cleanups and some simple alterations
to avoid NULL pointer dereferences in the big patch.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David Howells [Tue, 6 Sep 2016 21:19:51 +0000 (22:19 +0100)]
rxrpc: Add tracepoint for working out where aborts happen
Add a tracepoint for working out where local aborts happen. Each
tracepoint call is labelled with a 3-letter code so that they can be
distinguished - and the DATA sequence number is added too where available.
rxrpc_kernel_abort_call() also takes a 3-letter code so that AFS can
indicate the circumstances when it aborts a call.
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Wed, 7 Sep 2016 08:19:31 +0000 (09:19 +0100)]
rxrpc: Calls shouldn't hold socket refs
rxrpc calls shouldn't hold refs on the sock struct. This was done so that
the socket wouldn't go away whilst the call was in progress, such that the
call could reach the socket's queues.
However, we can mark the socket as requiring an RCU release and rely on the
RCU read lock.
To make this work, we do:
(1) rxrpc_release_call() removes the call's call user ID. This is now
only called from socket operations and not from the call processor:
Though it is also called in the cleanup path of
rxrpc_accept_incoming_call() before we assign a user ID.
(2) Pass the socket pointer into rxrpc_release_call() rather than getting
it from the call so that we can get rid of uninitialised calls.
(3) Fix call processor queueing to pass a ref to the work queue and to
release that ref at the end of the processor function (or to pass it
back to the work queue if we have to requeue).
(4) Skip out of the call processor function asap if the call is complete
and don't requeue it if the call is complete.
(5) Clean up the call immediately that the refcount reaches 0 rather than
trying to defer it. Actual deallocation is deferred to RCU, however.
(6) Don't hold socket refs for allocated calls.
(7) Use the RCU read lock when queueing a message on a socket and treat
the call's socket pointer according to RCU rules and check it for
NULL.
We also need to use the RCU read lock when viewing a call through
procfs.
(8) Transmit the final ACK/ABORT to a client call in rxrpc_release_call()
if this hasn't been done yet so that we can then disconnect the call.
Once the call is disconnected, it won't have any access to the
connection struct and the UDP socket for the call work processor to be
able to send the ACK. Terminal retransmission will be handled by the
connection processor.
(9) Release all calls immediately on the closing of a socket rather than
trying to defer this. Incomplete calls will be aborted.
The call refcount model is much simplified. Refs are held on the call by:
(1) A socket's user ID tree.
(2) A socket's incoming call secureq and acceptq.
(3) A kernel service that has a call in progress.
(4) A queued call work processor. We have to take care to put any call
that we failed to queue.
(5) sk_buffs on a socket's receive queue. A future patch will get rid of
this.
Whilst we're at it, we can do:
(1) Get rid of the RXRPC_CALL_EV_RELEASE event. Release is now done
entirely from the socket routines and never from the call's processor.
(2) Get rid of the RXRPC_CALL_DEAD state. Calls now end in the
RXRPC_CALL_COMPLETE state.
(3) Get rid of the rxrpc_call::destroyer work item. Calls are now torn
down when their refcount reaches 0 and then handed over to RCU for
final cleanup.
(4) Get rid of the rxrpc_call::deadspan timer. Calls are cleaned up
immediately they're finished with and don't hang around.
Post-completion retransmission is handled by the connection processor
once the call is disconnected.
(5) Get rid of the dead call expiry setting as there's no longer a timer
to set.
(6) rxrpc_destroy_all_calls() can just check that the call list is empty.
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Wed, 7 Sep 2016 14:28:54 +0000 (15:28 +0100)]
rxrpc: Pass the connection pointer to rxrpc_post_packet_to_call()
Pass the connection pointer to rxrpc_post_packet_to_call() as the call
might get disconnected whilst we're looking at it, but the connection
pointer determined by rxrpc_data_read() is guaranteed by RCU for the
duration of the call.
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Wed, 7 Sep 2016 14:19:25 +0000 (15:19 +0100)]
rxrpc: Cache the security index in the rxrpc_call struct
Cache the security index in the rxrpc_call struct so that we can get at it
even when the call has been disconnected and the connection pointer
cleared.
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Wed, 7 Sep 2016 13:45:26 +0000 (14:45 +0100)]
rxrpc: Use call->peer rather than call->conn->params.peer
Use call->peer rather than call->conn->params.peer to avoid the possibility
of call->conn being NULL and, whilst we're at it, check it for NULL before we
access it.
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Wed, 7 Sep 2016 13:34:21 +0000 (14:34 +0100)]
rxrpc: Improve the call tracking tracepoint
Improve the call tracking tracepoint by showing more differentiation
between some of the put and get events, including:
(1) Getting and putting refs for the socket call user ID tree.
(2) Getting and putting refs for queueing and failing to queue the call
processor work item.
Note that these aren't necessarily used in this patch, but will be taken
advantage of in future patches.
An enum is added for the event subtype numbers rather than coding them
directly as decimal numbers and a table of 3-letter strings is provided
rather than a sequence of ?: operators.
Signed-off-by: David Howells <dhowells@redhat.com>
gpio_to_irq does not return NO_IRQ but instead returns a negative
error code on failure. Returning NO_IRQ from the function has no
negative effects as we only compare the result to the expected
interrupt number, but it's better to return a proper failure
code for consistency, and we should remove NO_IRQ from the kernel
entirely.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Reported-by: Ma Yuying <yuma@redhat.com> Suggested-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Bert Kenward <bkenward@solarflare.com> Reviewed-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
perf, bpf: fix conditional call to bpf_overflow_handler
The newly added bpf_overflow_handler function is only built of both
CONFIG_EVENT_TRACING and CONFIG_BPF_SYSCALL are enabled, but the caller
only checks the latter:
kernel/events/core.c: In function 'perf_event_alloc':
kernel/events/core.c:9106:27: error: 'bpf_overflow_handler' undeclared (first use in this function)
This changes the caller so we also skip this call if CONFIG_EVENT_TRACING
is disabled entirely.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: aa6a5f3cb2b2 ("perf, bpf: add perf events core support for BPF_PROG_TYPE_PERF_EVENT programs") Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
We get 1 warning when building kernel with W=1:
drivers/net/ethernet/arc/emac_mdio.c:107:5: warning: no previous prototype for 'arc_mdio_reset' [-Wmissing-prototypes]
In fact, this function is only used in the file in which it is
declared and don't need a declaration, but can be made static.
so this patch marks this function with 'static'.
Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
We get a few warnings when building kernel with W=1:
drivers/net/usb/lan78xx.c:1182:6: warning: no previous prototype for 'lan78xx_defer_kevent' [-Wmissing-prototypes]
drivers/net/usb/lan78xx.c:1409:5: warning: no previous prototype for 'lan78xx_nway_reset' [-Wmissing-prototypes]
drivers/net/usb/lan78xx.c:2000:5: warning: no previous prototype for 'lan78xx_set_mac_addr' [-Wmissing-prototypes]
....
In fact, these functions are only used in the file in which they are
declared and don't need a declaration, but can be made static.
so this patch marks these functions with 'static'.
Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Adds support for several infrastructure operations that are done as part of
debug data collection.
Signed-off-by: Tomer Tayar <Tomer.Tayar@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Duyck [Mon, 5 Sep 2016 10:26:33 +0000 (13:26 +0300)]
bnx2x: Add support for segmentation of tunnels with outer checksums
Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 6 Sep 2016 20:53:29 +0000 (13:53 -0700)]
Merge tag 'rxrpc-rewrite-20160904-2' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
David Howells says:
====================
rxrpc: Split output code from sendmsg code
Here's a set of small patches that split the packet transmission code from
the sendmsg code and simply rearrange the new file to make it more
logically laid out ready for being rewritten. An enum is also moved out of
the header file to there as it's only used there. This needs to be applied
on top of the just-posted fixes patch set.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Haishuang Yan [Sun, 4 Sep 2016 10:52:51 +0000 (18:52 +0800)]
vxlan: Update tx_errors statistics if vxlan_build_skb return err.
If vxlan_build_skb return err < 0, tx_errors should be also increased.
Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Acked-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net/mlx4_en: protect ring->xdp_prog with rcu_read_lock
Depending on the preempt mode, the bpf_prog stored in xdp_prog may be
freed despite the use of call_rcu inside bpf_prog_put. The situation is
possible when running in PREEMPT_RCU=y mode, for instance, since the rcu
callback for destroying the bpf prog can run even during the bh handling
in the mlx4 rx path.
Several options were considered before this patch was settled on:
Add a napi_synchronize loop in mlx4_xdp_set, which would occur after all
of the rings are updated with the new program.
This approach has the disadvantage that as the number of rings
increases, the speed of update will slow down significantly due to
napi_synchronize's msleep(1).
Add a new rcu_head in bpf_prog_aux, to be used by a new bpf_prog_put_bh.
The action of the bpf_prog_put_bh would be to then call bpf_prog_put
later. Those drivers that consume a bpf prog in a bh context (like mlx4)
would then use the bpf_prog_put_bh instead when the ring is up. This has
the problem of complexity, in maintaining proper refcnts and rcu lists,
and would likely be harder to review. In addition, this approach to
freeing must be exclusive with other frees of the bpf prog, for instance
a _bh prog must not be referenced from a prog array that is consumed by
a non-_bh prog.
The placement of rcu_read_lock in this patch is functionally the same as
putting an rcu_read_lock in napi_poll. Actually doing so could be a
potentially controversial change, but would bring the implementation in
line with sk_busy_loop (though of course the nature of those two paths
is substantially different), and would also avoid future copy/paste
problems with future supporters of XDP. Still, this patch does not take
that opinionated option.
Testing was done with kernels in either PREEMPT_RCU=y or
CONFIG_PREEMPT_VOLUNTARY=y+PREEMPT_RCU=n modes, with neither exhibiting
any drawback. With PREEMPT_RCU=n, the extra call to rcu_read_lock did
not show up in the perf report whatsoever, and with PREEMPT_RCU=y the
overhead of rcu_read_lock (according to perf) was the same before/after.
In the rx path, rcu_read_lock is eventually called for every packet
from netif_receive_skb_internal, so the napi poll call's rcu_read_lock
is easily amortized.
v2:
Remove extra rcu_read_lock in mlx4_en_process_rx_cq body
Annotate xdp_prog with __rcu, and convert all usages to rcu_assign or
rcu_dereference[_protected] as appropriate.
Add explicit mutex lock around rcu_assign instead of xchg loop.
Fixes: d576acf0a22 ("net/mlx4_en: add page recycle to prepare rx ring for tx support") Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <alexei.starovoitov@gmail.com> Signed-off-by: Brenden Blanco <bblanco@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 6 Sep 2016 20:33:20 +0000 (13:33 -0700)]
Merge branch 'mediatek-rx-path-enhancements'
Sean Wang says:
====================
net: ethernet: mediatek: add enhancements to RX path
Changes since v1:
- fix message typos and add coverletter
Changes since v2:
- split from the previous series for submitting add enhancements as
a series targeting 'net-next' and add indents before comments.
Changes since v3:
- merge the patch using PDMA RX path
- fixed the input of mtk_poll_rx is with the remaining budget
Changes since v4:
- save one wmb and register update when no packet is being handled
inside mtk_poll_rx call
- fixed incorrect return packet count from mtk_napi_rx
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Sean Wang [Sat, 3 Sep 2016 09:59:27 +0000 (17:59 +0800)]
net: ethernet: mediatek: enhance RX path by aggregating more SKBs into NAPI
The patch adds support for aggregating more SKBs feed into NAPI in
order to get more benefits from generic receive offload (GRO) by
peeking at the RX ring status and moving more packets right before
returning from NAPI RX polling handler if NAPI budgets are still
available and some packets already present in hardware.
Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Sean Wang [Sat, 3 Sep 2016 09:59:26 +0000 (17:59 +0800)]
net: ethernet: mediatek: enhance RX path by reducing the frequency of the memory barrier used
The patch makes move wmb() to outside the loop that could help
RX path handling more faster although that RX descriptors aren't
freed for DMA to use as soon as possible, but based on my experiment
and the result shows it still can reach about 943Mbpis without
performance drop that is tested based on the setup with one port
using Giga PHY and 256 RX descriptors for DMA to move.
Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Joe Perches [Fri, 2 Sep 2016 22:58:01 +0000 (15:58 -0700)]
hso: Use a more common logging style
Macros that end in an underscore are just odd.
Add hso_dbg(level, fmt, ...) and use it everwhere instead.
Several uses had additional unnecessary newlines as the
macro added a newline. Remove the newline from the macro
and add newlines to each use as appropriate.
Remove now unused D<digit> macros.
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Add Microchip Linux Driver Support as maintainer
because this driver is maintaining by Microchip.
Signed-off-by: Woojung Huh <Woojung.huh@gmail.com> Acked-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 6 Sep 2016 19:58:14 +0000 (12:58 -0700)]
Merge branch 'mv88e6xxx-isolate-Global2'
Vivien Didelot says:
====================
net: dsa: mv88e6xxx: isolate Global2 support
Registers of Marvell chips are organized in internal SMI devices.
One of them at address 0x1C is called Global2. It provides an extended
set of registers, used for interrupt control, EEPROM access, indirect
PHY access (to bypass the PHY Polling Unit) and cross-chip setup.
Most chips have it, but some others don't (older ones such as 6060).
Now that its related code is isolated in mv88e6xxx_g2_* functions, move
it to its own global2.c file, making most of its setup code static.
Then make its compilation optional, which allows to reduce the size of
the mv88e6xxx driver for devices such as home routers embedding Ethernet
chips without Global2 support.
It is present on most recent chips, thus enable its support by default.
Changes in v2: fail probe if GLOBAL2 is required but not enabled.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
projects / linux-beck.git / log