FDR register of R-Car set in fdr_value can have the original settings.
This sets the value that is suitable for each SoCs to fdr_value of R8A777x
and R8A779x.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 9 Jan 2015 03:40:52 +0000 (19:40 -0800)]
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net
Jeff Kirsher says:
====================
Intel Wired LAN Driver Updates 2015-01-06
This series contains fixes to i40e only.
Jesse provides a fix for when the driver was polling with interrupts
disabled the hardware would occasionally not write back descriptors.
His fix causes the driver to detect this situation and force an interrupt
to fire which will flush the stuck descriptor.
Anjali provides a couple of fixes, the first corrects an issue where
the receive port checksum error counter was incrementing incorrectly with
UDP encapsulated tunneled traffic. The second fix resolves an issue where
the driver was examining the outer protocol layer to set the inner protocol
layer checksum offload. In the case of TCP over IPv6 over an IPv4 based
VXLAN, the inner checksum offloads would be set to look for IPv4/UDP
instead of IPv6/TCP, so fixed the issue so that the driver will look at
the proper layer for encapsulation offload settings.
v2: fixed a bug in patch 01 of the series, where the interrupt rate impacted
4 port workloads by reducing throughput.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
"Just a pile of random fixes, including:
1) Do not apply TSO limits to non-TSO packets, fix from Herbert Xu.
2) MDI{,X} eeprom check in e100 driver is reversed, from John W.
Linville.
3) Missing error return assignments in several ethernet drivers, from
Julia Lawall.
4) Altera TSE device doesn't come back up after ifconfig down/up
sequence, fix from Kostya Belezko.
5) Add more cases to the check for whether the qmi_wwan device has a
bogus MAC address and needs to be assigned a random one. From
Kristian Evensen.
6) Fix interrupt hangs in CPSW, from Felipe Balbi.
7) Implement ndo_features_check in r8152 so that the stack doesn't
feed GSO packets which are outside of the chip's capabilities.
From Hayes Wang"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (26 commits)
qla3xxx: don't allow never end busy loop
xen-netback: fixing the propagation of the transmit shaper timeout
r8152: support ndo_features_check
batman-adv: fix potential TT client + orig-node memory leak
batman-adv: fix multicast counter when purging originators
batman-adv: fix counter for multicast supporting nodes
batman-adv: fix lock class for decoding hash in network-coding.c
batman-adv: fix delayed foreign originator recognition
batman-adv: fix and simplify condition when bonding should be used
Revert "mac80211: Fix accounting of the tailroom-needed counter"
net: ethernet: cpsw: fix hangs with interrupts
enic: free all rq buffs when allocation fails
qmi_wwan: Set random MAC on devices with buggy fw
openvswitch: Consistently include VLAN header in flow and port stats.
tcp: Do not apply TSO segment limit to non-TSO packets
Altera TSE: Add missing phydev
net/mlx4_core: Fix error flow in mlx4_init_hca()
net/mlx4_core: Correcly update the mtt's offset in the MR re-reg flow
qlcnic: Fix return value in qlcnic_probe()
net: axienet: fix error return code
...
Anjali Singhai [Fri, 19 Dec 2014 02:58:16 +0000 (02:58 +0000)]
i40e: Fix bug with TCP over IPv6 over VXLAN
The driver was examining the outer protocol layer to set the inner protocol
layer checksum offload. In the case of TCP over IPV6 over an IPv4 based
VXLAN the inner checksum offloads would be set to look for IPv4/UDP instead
of IPv6/TCP. This code fixes that so that the driver will look at the
proper layer for encapsulation offload settings.
Signed-off-by: Anjali Singhai <anjali.singhai@intel.com> Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Anjali Singhai [Fri, 19 Dec 2014 02:58:11 +0000 (02:58 +0000)]
i40e: Fix Rx checksum error counter
The Rx port checksum error counter was incrementing incorrectly with
UDP encapsulated tunneled traffic. This patch fixes the problem so that
the port_rx_csum counter will show accurate statistics.
Signed-off-by: Anjali Singhai <anjali.singhai@intel.com> Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
When the driver was polling with interrupts disabled the hardware
will occasionally not write back descriptors. This patch causes
the driver to detect this situation and force an interrupt to
fire which will flush the stuck descriptor. Does not conflict
with napi because if we are already polling the napi_schedule is
ignored. Additionally the extra interrupts are rate limited, so
don't cause a burden to the CPU.
Change-ID: Iba4616d2a71288672a5f08e4512e2704b97335e8 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Linus Torvalds [Tue, 6 Jan 2015 22:05:40 +0000 (14:05 -0800)]
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 bugfixes from Ted Ts'o:
"Revert a potential seek_data/hole regression which shows up when using
ext4 to handle ext3 file systems, plus two minor bug fixes"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: remove spurious KERN_INFO from ext4_warning call
Revert "ext4: fix suboptimal seek_{data,hole} extents traversial"
ext4: prevent online resize with backup superblock
Linus Torvalds [Tue, 6 Jan 2015 21:00:05 +0000 (13:00 -0800)]
mm: propagate error from stack expansion even for guard page
Jay Foad reports that the address sanitizer test (asan) sometimes gets
confused by a stack pointer that ends up being outside the stack vma
that is reported by /proc/maps.
This happens due to an interaction between RLIMIT_STACK and the guard
page: when we do the guard page check, we ignore the potential error
from the stack expansion, which effectively results in a missing guard
page, since the expected stack expansion won't have been done.
And since /proc/maps explicitly ignores the guard page (commit d7824370e263: "mm: fix up some user-visible effects of the stack guard
page"), the stack pointer ends up being outside the reported stack area.
This is the minimal patch: it just propagates the error. It also
effectively makes the guard page part of the stack limit, which in turn
measn that the actual real stack is one page less than the stack limit.
Let's see if anybody notices. We could teach acct_stack_growth() to
allow an extra page for a grow-up/grow-down stack in the rlimit test,
but I don't want to add more complexity if it isn't needed.
Reported-and-tested-by: Jay Foad <jay.foad@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David S. Miller [Tue, 6 Jan 2015 19:24:49 +0000 (14:24 -0500)]
Merge tag 'batman-adv-fix-for-davem' of git://git.open-mesh.org/linux-merge
Included changes:
- ensure bonding is used (if enabled) for packets coming in the soft
interface
- fix race condition to avoid orig_nodes to be deleted right after
being added
- avoid false positive lockdep splats by assigning lockclass to
the proper hashtable lock objects
- avoid miscounting of multicast 'disabled' nodes in the network
- fix memory leak in the Global Translation Table in case of
originator interval change
Signed-off-by: David S. Miller <davem@davemloft.net>
Palik, Imre [Tue, 6 Jan 2015 15:44:44 +0000 (16:44 +0100)]
xen-netback: fixing the propagation of the transmit shaper timeout
Since e9ce7cb6b107 ("xen-netback: Factor queue-specific data into queue struct"),
the transimt shaper timeout is always set to 0. The value the user sets via
xenbus is never propagated to the transmit shaper.
This patch fixes the issue.
Cc: Anthony Liguori <aliguori@amazon.com> Signed-off-by: Imre Palik <imrep@amazon.de> Acked-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 6 Jan 2015 18:29:27 +0000 (13:29 -0500)]
Merge tag 'mac80211-for-davem-2015-01-06' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Here's just a single fix - a revert of a patch that broke the
p54 and cw2100 drivers (arguably due to bad assumptions there.)
Since this affects kernels since 3.17, I decided to revert for
now and we'll revisit this optimisation properly for -next.
Signed-off-by: David S. Miller <davem@davemloft.net>
hayeswang [Tue, 6 Jan 2015 09:41:58 +0000 (17:41 +0800)]
r8152: support ndo_features_check
Support ndo_features_check to avoid:
- the transport offset is more than the hw limitation when using hw checksum.
- the skb->len of a GSO packet is more than the limitation.
Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes a potential memory leak which can occur once an
originator times out. On timeout the according global translation table
entry might not get purged correctly. Furthermore, the non purged TT
entry will cause its orig-node to leak, too. Which additionally can lead
to the new multicast optimization feature not kicking in because of a
therefore bogus counter.
In detail: The batadv_tt_global_entry->orig_list holds the reference to
the orig-node. Usually this reference is released after
BATADV_PURGE_TIMEOUT through: _batadv_purge_orig()->
batadv_purge_orig_node()->batadv_update_route()->_batadv_update_route()->
batadv_tt_global_del_orig() which purges this global tt entry and
releases the reference to the orig-node.
However, if between two batadv_purge_orig_node() calls the orig-node
timeout grew to 2*BATADV_PURGE_TIMEOUT then this call path isn't
reached. Instead the according orig-node is removed from the
originator hash in _batadv_purge_orig(), the batadv_update_route()
part is skipped and won't be reached anymore.
Fixing the issue by moving batadv_tt_global_del_orig() out of the rcu
callback.
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Acked-by: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
Linus Lüssing [Thu, 30 Oct 2014 04:40:47 +0000 (05:40 +0100)]
batman-adv: fix multicast counter when purging originators
When purging an orig_node we should only decrease counter tracking the
number of nodes without multicast optimizations support if it was
increased through this orig_node before.
A not yet quite initialized orig_node (meaning it did not have its turn
in the mcast-tvlv handler so far) which gets purged would not adhere to
this and will lead to a counter imbalance.
Fixing this by adding a check whether the orig_node is mcast-initalized
before decreasing the counter in the mcast-orig_node-purging routine.
Linus Lüssing [Thu, 30 Oct 2014 04:40:46 +0000 (05:40 +0100)]
batman-adv: fix counter for multicast supporting nodes
A miscounting of nodes having multicast optimizations enabled can lead
to multicast packet loss in the following scenario:
If the first OGM a node receives from another one has no multicast
optimizations support (no multicast tvlv) then we are missing to
increase the counter. This potentially leads to the wrong assumption
that we could safely use multicast optimizations.
Fixings this by increasing the counter if the initial OGM has the
multicast TVLV unset, too.
Martin Hundebøll [Tue, 11 Nov 2014 15:22:23 +0000 (16:22 +0100)]
batman-adv: fix lock class for decoding hash in network-coding.c
batadv_has_set_lock_class() is called with the wrong hash table as first
argument (probably due to a copy-paste error), which leads to false
positives when running with lockdep.
Introduced-by: 612d2b4fe0a1ff2f8389462a6f8be34e54124c05
("batman-adv: network coding - save overheard and tx packets for decoding")
Signed-off-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
Currently it can happen that the reception of an OGM from a new
originator is not being accepted. More precisely it can happen that
an originator struct gets allocated and initialized
(batadv_orig_node_new()), even the TQ gets calculated and set correctly
(batadv_iv_ogm_calc_tq()) but still the periodic orig_node purging
thread will decide to delete it if it has a chance to jump between
these two function calls.
This is because batadv_orig_node_new() initializes the last_seen value
to zero and its caller (batadv_iv_ogm_orig_get()) makes it visible to
other threads by adding it to the hash table already.
batadv_iv_ogm_calc_tq() will set the last_seen variable to the correct,
current time a few lines later but if the purging thread jumps in between
that it will think that the orig_node timed out and will wrongly
schedule it for deletion already.
If the purging interval is the same as the originator interval (which is
the default: 1 second), then this game can continue for several rounds
until the random OGM jitter added enough difference between these
two (in tests, two to about four rounds seemed common).
Fixing this by initializing the last_seen variable of an orig_node
to the current time before adding it to the hash table.
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
Simon Wunderlich [Wed, 13 Aug 2014 12:26:56 +0000 (14:26 +0200)]
batman-adv: fix and simplify condition when bonding should be used
The current condition actually does NOT consider bonding when the
interface the packet came in from is the soft interface, which is the
opposite of what it should do (and the comment describes). Fix that and
slightly simplify the condition.
Reported-by: Ray Gibson <booray@gmail.com> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
Linus Torvalds [Mon, 5 Jan 2015 22:49:02 +0000 (14:49 -0800)]
Merge tag 'powerpc-3.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux
Pull powerpc fixes from Michael Ellerman:
- Wire up sys_execveat(). Tested on 32 & 64 bit.
- Fix for kdump on LE systems with cpus hot unplugged.
- Revert Anton's fix for "kernel BUG at kernel/smpboot.c:134!", this
broke other platforms, we'll do a proper fix for 3.20.
* tag 'powerpc-3.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux:
Revert "powerpc: Secondary CPUs must set cpu_callin_map after setting active and online"
powerpc/kdump: Ignore failure in enabling big endian exception during crash
powerpc: Wire up sys_execveat() syscall
It turns out that the p54 and cw2100 drivers assume that there's
tailroom even when they don't say they really need it. However,
there's currently no way for them to explicitly say they do need
it, so for now revert this.
This fixes https://bugzilla.kernel.org/show_bug.cgi?id=90331.
Cc: stable@vger.kernel.org Fixes: ca34e3b5c808 ("mac80211: Fix accounting of the tailroom-needed counter") Reported-by: Christopher Chavez <chrischavez@gmx.us> Bisected-by: Larry Finger <Larry.Finger@lwfinger.net> Debugged-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Felipe Balbi [Fri, 2 Jan 2015 22:15:59 +0000 (16:15 -0600)]
net: ethernet: cpsw: fix hangs with interrupts
The CPSW IP implements pulse-signaled interrupts. Due to
that we must write a correct, pre-defined value to the
CPDMA_MACEOIVECTOR register so the controller generates
a pulse on the correct IRQ line to signal the End Of
Interrupt.
The way the driver is written today, all four IRQ lines
are requested using the same IRQ handler and, because of
that, we could fall into situations where a TX IRQ fires
but we tell the controller that we ended an RX IRQ (or
vice-versa). This situation triggers an IRQ storm on the
reserved IRQ 127 of INTC which will in turn call ack_bad_irq()
which will, then, print a ton of:
unexpected IRQ trap at vector 00
In order to fix the problem, we are moving all calls to
cpdma_ctlr_eoi() inside the IRQ handler and making sure
we *always* write the correct value to the CPDMA_MACEOIVECTOR
register. Note that the algorithm assumes that IRQ numbers and
value-to-be-written-to-EOI are proportional, meaning that a
write of value 0 would trigger an EOI pulse for the RX_THRESHOLD
Interrupt and that's the IRQ number sitting in the 0-th index
of our irqs_table array.
This, however, is safe at least for current implementations of
CPSW so we will refrain from making the check smarter (and, as
a side-effect, slower) until we actually have a platform where
IRQ lines are swapped.
This patch has been tested for several days with AM335x- and
AM437x-based platforms. AM57x was left out because there are
still pending patches to enable ethernet in mainline for that
platform. A read of the TRM confirms the statement on previous
paragraph.
Reported-by: Yegor Yefremov <yegorslists@googlemail.com> Fixes: 510a1e7 (drivers: net: davinci_cpdma: acknowledge interrupt properly) Cc: <stable@vger.kernel.org> # v3.9+ Signed-off-by: Felipe Balbi <balbi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sun, 4 Jan 2015 19:46:43 +0000 (11:46 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml
Pull UML fixes from Richard Weinberger:
"Two fixes for UML regressions. Nothing exciting"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
x86, um: actually mark system call tables readonly
um: Skip futex_atomic_cmpxchg_inatomic() test
Pavel Machek [Sun, 4 Jan 2015 19:01:23 +0000 (20:01 +0100)]
Revert "ARM: 7830/1: delay: don't bother reporting bogomips in /proc/cpuinfo"
Commit 9fc2105aeaaf ("ARM: 7830/1: delay: don't bother reporting
bogomips in /proc/cpuinfo") breaks audio in python, and probably
elsewhere, with message
Daniel Borkmann [Sat, 3 Jan 2015 12:11:10 +0000 (13:11 +0100)]
x86, um: actually mark system call tables readonly
Commit a074335a370e ("x86, um: Mark system call tables readonly") was
supposed to mark the sys_call_table in UML as RO by adding the const,
but it doesn't have the desired effect as it's nevertheless being placed
into the data section since __cacheline_aligned enforces sys_call_table
being placed into .data..cacheline_aligned instead. We need to use
the ____cacheline_aligned version instead to fix this issue.
Before:
$ nm -v arch/x86/um/sys_call_table_64.o | grep -1 "sys_call_table"
U sys_writev 0000000000000000 D sys_call_table 0000000000000000 D syscall_table_size
After:
$ nm -v arch/x86/um/sys_call_table_64.o | grep -1 "sys_call_table"
U sys_writev 0000000000000000 R sys_call_table 0000000000000000 D syscall_table_size
Fixes: a074335a370e ("x86, um: Mark system call tables readonly") Cc: H. Peter Anvin <hpa@zytor.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Richard Weinberger <richard@nod.at>
futex_atomic_cmpxchg_inatomic() does not work on UML because
it triggers a copy_from_user() in kernel context.
On UML copy_from_user() can only be used if the kernel was called
by a real user space process such that UML can use ptrace()
to fetch the value.
Reported-by: Miklos Szeredi <miklos@szeredi.hu> Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Richard Weinberger <richard@nod.at> Tested-by: Daniel Walter <d.walter@0x90.at>
Some buggy firmwares export an incorrect MAC address (00:a0:c6:00:00:00). This
makes for example checking devices for random MAC addresses tricky, and you
might end up with multiple network interfaces with the same address.
This patch tries to fix, or at least improve, the situation by setting the MAC
address of devices with this firmware bug to a random address. I tested the
patch with two devices that has this firmware bug (Huawei E398 and E392), and
network traffic worked fine after changing the address.
Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Fri, 2 Jan 2015 21:24:41 +0000 (13:24 -0800)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is a set of three fixes: one to correct an abort path thinko
causing failures (and a panic) in USB on device misbehaviour, One to
fix an out of order issue in the fnic driver and one to match discard
expectations to qemu which otherwise cause Linux to behave badly as a
guest"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
SCSI: fix regression in scsi_send_eh_cmnd()
fnic: IOMMU Fault occurs when IO and abort IO is out of order
sd: tweak discard heuristics to work around QEMU SCSI issue
Ben Pfaff [Wed, 31 Dec 2014 16:45:46 +0000 (08:45 -0800)]
openvswitch: Consistently include VLAN header in flow and port stats.
Until now, when VLAN acceleration was in use, the bytes of the VLAN header
were not included in port or flow byte counters. They were however
included when VLAN acceleration was not used. This commit corrects the
inconsistency, by always including the VLAN header in byte counters.
Previous discussion at
http://openvswitch.org/pipermail/dev/2014-December/049521.html
Reported-by: Motonori Shindo <mshindo@vmware.com> Signed-off-by: Ben Pfaff <blp@nicira.com> Reviewed-by: Flavio Leitner <fbl@sysclose.org> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Herbert Xu [Wed, 31 Dec 2014 13:39:23 +0000 (00:39 +1100)]
tcp: Do not apply TSO segment limit to non-TSO packets
Thomas Jarosch reported IPsec TCP stalls when a PMTU event occurs.
In fact the problem was completely unrelated to IPsec. The bug is
also reproducible if you just disable TSO/GSO.
The problem is that when the MSS goes down, existing queued packet
on the TX queue that have not been transmitted yet all look like
TSO packets and get treated as such.
This then triggers a bug where tcp_mss_split_point tells us to
generate a zero-sized packet on the TX queue. Once that happens
we're screwed because the zero-sized packet can never be removed
by ACKs.
Fixes: 1485348d242 ("tcp: Apply device TSO segment limit earlier") Reported-by: Thomas Jarosch <thomas.jarosch@intra2net.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Cheers, Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Fri, 2 Jan 2015 20:57:20 +0000 (12:57 -0800)]
Merge tag 'sound-3.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Nothing too exciting as a new year's start here: most of fixes are for
ASoC, a boot crash fix on OMAP for deferred probe, a few driver
specific fixes (Intel, dwc, rockchip, rt5677), in addition to typo
fixes in kerneldoc comments for PCM"
* tag 'sound-3.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: pcm: Fix kerneldoc for params_*() functions
ASoC: rockchip: i2s: fix maxburst of dma data to 4
ASoC: rockchip: i2s: fix error defination of transmit data level
ASoC: Intel: correct the fixed free block allocation
ASoC: rt5677: fixed rt5677_dsp_vad_put rt5677_dsp_vad_get panic
ASoC: Intel: Fix BYTCR machine driver MODULE_ALIAS
ASoC: Intel: Fix BYTCR firmware name
ASoC: dwc: Iterate over all channels
ASoC: dwc: Ensure FIFOs are flushed to prevent channel swap
ASoC: Intel: Add I2C dependency to two new machines
ASoC: dapm: Remove snd_soc_of_parse_audio_routing() due to deferred probe
Kostya Belezko [Tue, 30 Dec 2014 17:27:09 +0000 (12:27 -0500)]
Altera TSE: Add missing phydev
Altera network device doesn't come up after
ifconfig eth0 down
ifconfig eth0 up
The reason behind is clearing priv->phydev during tse_shutdown().
The phydev is not restored back at tse_open().
Resubmiting as to follow Tobias Klauser suggestion.
phy_start/phy_stop are called on each ifup/ifdown and
phy_disconnect is called once during the module removal.
Signed-off-by: Kostya Belezko <bkostya@hotmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jack Morgenstein [Tue, 30 Dec 2014 09:59:50 +0000 (11:59 +0200)]
net/mlx4_core: Fix error flow in mlx4_init_hca()
We shouldn't call UNMAP_FA here, this is done in mlx4_load_one.
If mlx4_query_func fails, we need to invoke CLOSE_HCA for both
native and master.
Fixes: a0eacca948d2 ('net/mlx4_core: Refactor mlx4_load_one') Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Maor Gottlieb [Tue, 30 Dec 2014 09:59:49 +0000 (11:59 +0200)]
net/mlx4_core: Correcly update the mtt's offset in the MR re-reg flow
Previously, mlx4_mt_rereg_write filled the MPT's entity_size with the
old MTT's page shift, which could result in using an incorrect offset.
Fix the initialization to be after we calculate the new MTT offset.
In addition, assign mtt order to -1 after calling mlx4_mtt_cleanup. This
is necessary in order to mark the MTT as invalid and avoid freeing it later.
Fixes: e630664 ('mlx4_core: Add helper functions to support MR re-registration') Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Fri, 2 Jan 2015 20:07:50 +0000 (12:07 -0800)]
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull vhost cleanup and virtio bugfix
"There's a single change here, fixing a vhost bug where vhost
initialization fails due to used ring alignment check being too
strict"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost: relax used address alignment
virtio_ring: document alignment requirements
Yongjian Xu [Tue, 30 Dec 2014 08:03:46 +0000 (16:03 +0800)]
qlcnic: Fix return value in qlcnic_probe()
If the check of adapter fails and goes into the 'else' branch, the
return value 'err' should not still be zero.
Signed-off-by: Yongjian Xu <xuyongjiande@gmail.com> Acked-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Joe Perches [Mon, 8 Dec 2014 04:28:39 +0000 (04:28 +0000)]
i40e: Fix possible memory leak in i40e_dbg_dump_desc
I didn't notice that return in the code, fix it by
adding a goto out instead to free the memory.
Fixes:
> New smatch warnings:
> drivers/net/ethernet/intel/i40e/i40e_debugfs.c:832 i40e_dbg_dump_desc() warn: possible memory leak of 'ring'
Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Joe Perches <joe@perches.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Linus Torvalds [Wed, 31 Dec 2014 22:52:18 +0000 (14:52 -0800)]
Merge branch 'upstream' of git://git.infradead.org/users/pcmoore/audit
Pull audit fix from Paul Moore:
"One audit patch to resolve a panic/oops when recording filenames in
the audit log, see the mail archive link below.
The fix isn't as nice as I would like, as it involves an allocate/copy
of the filename, but it solves the problem and the overhead should
only affect users who have configured audit rules involving file
names.
We'll revisit this issue with future kernels in an attempt to make
this suck less, but in the meantime I think this fix should go into
the next release of v3.19-rcX.
Todd Fujinaka [Thu, 27 Nov 2014 01:00:02 +0000 (01:00 +0000)]
igb: Remove unneeded FIXME
Remove a FIXME comment that was missed in a commit on 1/2007.
Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com> Reported-by: nick <xerofoify@gmail.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
John W. Linville [Sat, 15 Nov 2014 01:19:53 +0000 (01:19 +0000)]
e100: fix typo in MDI/MDI-X eeprom check in e100_phy_init
Although it doesn't explicitly say so, commit 60ffa478759f39a2 ("e100:
Fix MDIO/MDIO-X") appears to be intended to revert the earlier commit 648951451e6d2d53 ("e100: fixed e100 MDI/MDI-X issues"). However,
careful examination reveals that the attempted revert actually
_inverted_ the test for eeprom_mdix_enabled. That is bound to program
a few PHYs incorrectly...
Signed-off-by: "John W. Linville" <linville@tuxdriver.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Tobias Klauser [Wed, 31 Dec 2014 02:53:11 +0000 (10:53 +0800)]
nios2: Use preempt_schedule_irq
Follow aa0d53260596 ("ia64: Use preempt_schedule_irq") and use
preempt_schedule_irq instead of enabling/disabling interrupts and
messing around with PREEMPT_ACTIVE in the nios2 low-level preemption
code ourselves. Also get rid of the now needless re-check for
TIF_NEED_RESCHED, preempt_schedule_irq will already take care of
rescheduling.
This also fixes the following build error when building with
CONFIG_PREEMPT:
arch/nios2/kernel/built-in.o: In function `need_resched':
arch/nios2/kernel/entry.S:374: undefined reference to `PREEMPT_ACTIVE'
Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: Ley Foon Tan <lftan@altera.com>
Linus Torvalds [Wed, 31 Dec 2014 01:13:13 +0000 (17:13 -0800)]
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
"A very small set of fixes for 3.19, as everyone was out.
The clocksource patch was something I missed for the merge window
after the change that broke arm64 was merged through arm-soc. The
other two patches are a fix for an undetected merge problem in mvebu
and a defconfig change to make some exynos boards work with the normal
multi_v7_defconfig"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
Add USB_EHCI_EXYNOS to multi_v7_defconfig
ARM: mvebu: Fix pinctrl configuration for Armada 370 DB
clocksource: arch_timer: Only use the virtual counter (CNTVCT) on arm64
Linus Torvalds [Wed, 31 Dec 2014 01:04:56 +0000 (17:04 -0800)]
Merge tag 'fbdev-fixes-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux
Pull fbdev fixes from Tomi Valkeinen:
- Fix regression with Nokia N900 display
- Fix crash on fbdev using freed __initdata logos
- Fix fb_deferred_io_fsync() return value.
* tag 'fbdev-fixes-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux:
OMAPDSS: SDI: fix output port_num
video/fbdev: fix defio's fsync
video/logo: prevent use of logos after they have been freed
OMAPDSS: pll: NULL dereference in error handling
OMAPDSS: HDMI: remove double initializer entries
It's causing severe userspace breakage. Namely, all the utilities from
wireless-utils which are relying on CONFIG_WEXT (which means tools like
'iwconfig', 'iwlist', etc) are not working anymore. There is a 'iw'
utility in newer wireless-tools, which is supposed to be a replacement
for all the "deprecated" binaries, but it's far away from being
massively adopted.
Please see [1] for example of the userspace breakage this is causing.
In addition to that, Larry Finger reports [2] that this patch is also
causing ipw2200 driver being impossible to build.
To me this clearly shows that CONFIG_WEXT is far, far away from being
"deprecated enough" to be removed.
1) Fix double SKB free in bluetooth 6lowpan layer, from Jukka Rissanen.
2) Fix receive checksum handling in enic driver, from Govindarajulu
Varadarajan.
3) Fix NAPI poll list corruption in virtio_net and caif_virtio, from
Herbert Xu. Also, add code to detect drivers that have this mistake
in the future.
4) Fix doorbell endianness handling in mlx4 driver, from Amir Vadai.
5) Don't clobber IP6CB() before xfrm6_policy_check() is called in TCP
input path,f rom Nicolas Dichtel.
6) Fix MPLS action validation in openvswitch, from Pravin B Shelar.
7) Fix double SKB free in vxlan driver, also from Pravin.
8) When we scrub a packet, which happens when we are switching the
context of the packet (namespace, etc.), we should reset the
secmark. From Thomas Graf.
9) ->ndo_gso_check() needs to do more than return true/false, it also
has to allow the driver to clear netdev feature bits in order for
the caller to be able to proceed properly. From Jesse Gross.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (62 commits)
genetlink: A genl_bind() to an out-of-range multicast group should not WARN().
netlink/genetlink: pass network namespace to bind/unbind
ne2k-pci: Add pci_disable_device in error handling
bonding: change error message to debug message in __bond_release_one()
genetlink: pass multicast bind/unbind to families
netlink: call unbind when releasing socket
netlink: update listeners directly when removing socket
genetlink: pass only network namespace to genl_has_listeners()
netlink: rename netlink_unbind() to netlink_undo_bind()
net: Generalize ndo_gso_check to ndo_features_check
net: incorrect use of init_completion fixup
neigh: remove next ptr from struct neigh_table
net: xilinx: Remove unnecessary temac_property in the driver
net: phy: micrel: use generic config_init for KSZ8021/KSZ8031
net/core: Handle csum for CHECKSUM_COMPLETE VXLAN forwarding
openvswitch: fix odd_ptr_err.cocci warnings
Bluetooth: Fix accepting connections when not using mgmt
Bluetooth: Fix controller configuration with HCI_QUIRK_INVALID_BDADDR
brcmfmac: Do not crash if platform data is not populated
ipw2200: select CFG80211_WEXT
...
Alan Stern [Fri, 21 Nov 2014 15:44:49 +0000 (10:44 -0500)]
SCSI: fix regression in scsi_send_eh_cmnd()
Commit ac61d1955934 (scsi: set correct completion code in
scsi_send_eh_cmnd()) introduced a bug. It changed the stored return
value from a queuecommand call, but it didn't take into account that
the return value was used again later on. This patch fixes the bug by
changing the later usage.
There is a big comment in the middle of scsi_send_eh_cmnd() which
does a good job of explaining how the routine works. But it mentions
a "rtn = FAILURE" value that doesn't exist in the code. This patch
adjusts the code to match the comment (I assume the comment is right
and the code is wrong).
This fixes Bugzilla #88341.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Андрей Аладьев <aladjev.andrew@gmail.com> Tested-by: Андрей Аладьев <aladjev.andrew@gmail.com> Fixes: ac61d19559349e205dad7b5122b281419aa74a82 Acked-by: Hannes Reinecke <hare@suse.de> Cc: <stable@vger.kernel.org> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Takashi Iwai [Tue, 30 Dec 2014 15:17:13 +0000 (16:17 +0100)]
Merge tag 'asoc-fix-v3.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v3.19
A few fixes for v3.19, a few driver specifics and one core fix which
fixes a boot crash on OMAP if deferred probing kicks in due to
attempting to modify static data.
Currently we enable Exynos devices in the multi v7 defconfig, however, when
testing on my ODROID-U3, I noticed that USB was not working. Enabling this
option causes USB to work, which enables networking support as well since the
ODROID-U3 has networking on the USB bus.
[arnd] Support for odroid-u3 was added in 3.10, so it would be nice to
backport this fix at least that far.
Paul Moore [Tue, 30 Dec 2014 14:26:21 +0000 (09:26 -0500)]
audit: create private file name copies when auditing inodes
Unfortunately, while commit 4a928436 ("audit: correctly record file
names with different path name types") fixed a problem where we were
not recording filenames, it created a new problem by attempting to use
these file names after they had been freed. This patch resolves the
issue by creating a copy of the filename which the audit subsystem
frees after it is done with the string.
At some point it would be nice to resolve this issue with refcounts,
or something similar, instead of having to allocate/copy strings, but
that is almost surely beyond the scope of a -rcX patch so we'll defer
that for later. On the plus side, only audit users should be impacted
by the string copying.
Reported-by: Toralf Foerster <toralf.foerster@gmx.de> Signed-off-by: Paul Moore <pmoore@redhat.com>
fnic: IOMMU Fault occurs when IO and abort IO is out of order
When I/O is aborted by mid-layer, fnic FW will complete the I/O before
completing the abort task. In some cases abort request is completed before
the I/O, which could lead to inconsistent driver and firmware states.
In this case firmware reset would clear the inconsistent state.
Signed-off-by: Anil Chintalapati <achintal@cisco.com> Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com> Signed-off-by: Hiral Shah <hishah@cisco.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
sd: tweak discard heuristics to work around QEMU SCSI issue
7985090aa020 changed the discard heuristics to give preference to the
WRITE SAME commands that (unlike UNMAP) guarantee deterministic results.
Ming Lei discovered that QEMU SCSI's WRITE SAME implementation
internally relied on limits that were only communicated for the UNMAP
case. And therefore discard commands backed by WRITE SAME would fail.
Tweak the heuristics so we still pick UNMAP in the LBPRZ=0 case and only
prefer the WRITE SAME variants if the device has the LBPRZ flag set.
Reported-by: Ming Lei <ming.lei@canonical.com> Tested-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
Tomi Valkeinen [Mon, 29 Dec 2014 07:57:11 +0000 (09:57 +0200)]
OMAPDSS: SDI: fix output port_num
After the commit ef691ff48bc8 (OMAPDSS: DT: Get source endpoint by
matching reg-id) we look for the SDI output using the port number.
However, the SDI driver doesn't set the port number, which causes the
SDI display to not initialize.
Fix this by setting the SDI port number to 1. We use a hardcoded value,
as SDI was used only on OMAP3 and it's always port number 1 there.
Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi> Reported-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tomi Valkeinen [Fri, 19 Dec 2014 11:55:41 +0000 (13:55 +0200)]
video/fbdev: fix defio's fsync
fb_deferred_io_fsync() returns the value of schedule_delayed_work() as
an error code, but schedule_delayed_work() does not return an error. It
returns true/false depending on whether the work was already queued.
Fix this by ignoring the return value of schedule_delayed_work().
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: stable@vger.kernel.org
Linus Torvalds [Tue, 30 Dec 2014 05:09:57 +0000 (21:09 -0800)]
Merge branch 'for-linus' of git://git.samba.org/sfrench/cifs-2.6
Pull CIFS fixes from Steve French:
"A set of three minor cifs fixes"
* 'for-linus' of git://git.samba.org/sfrench/cifs-2.6:
cifs: make new inode cache when file type is different
Fix signed/unsigned pointer warning
Convert MessageID in smb2_hdr to LE
Linus Torvalds [Tue, 30 Dec 2014 04:43:10 +0000 (20:43 -0800)]
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull UDF & isofs fixes from Jan Kara:
"A couple of UDF fixes of handling of corrupted media and one iso9660
fix of the same"
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
udf: Reduce repeated dereferences
udf: Check component length before reading it
udf: Check path length when reading symlink
udf: Verify symlink size before loading it
udf: Verify i_size when loading inode
isofs: Fix unchecked printing of ER records
Linus Torvalds [Tue, 30 Dec 2014 02:50:02 +0000 (18:50 -0800)]
Merge tag 'pm+acpi-3.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management and ACPI material from Rafael J Wysocki:
"These are fixes (operating performance points library, cpufreq-dt
driver, cpufreq core, ACPI backlight, cpupower tool), cleanups
(cpuidle), new processor IDs for the RAPL (Running Average Power
Limit) power capping driver, and a modification of the generic power
domains framework allowing modular drivers to call one of its helper
functions.
Specifics:
- Fix for a potential NULL pointer dereference in the cpufreq core
due to an initialization race condition (Ethan Zhao).
- Fixes for abuse of the OPP (Operating Performance Points) API
related to RCU and other minor issues in the OPP library and the
cpufreq-dt driver (Dmitry Torokhov).
- cpuidle governors cleanup making them measure idle duration in a
better way without using the CPUIDLE_FLAG_TIME_INVALID flag which
allows that flag to be dropped from the ACPI cpuidle driver and
from the core too (Len Brown).
- New ACPI backlight blacklist entries for Samsung machines without a
working native backlight interface that need to use the ACPI
backlight instead (Aaron Lu).
- New CPU IDs of future Intel Xeon CPUs for the Intel RAPL power
capping driver (Jacob Pan).
- Generic power domains framework modification to export the
of_genpd_get_from_provider() function to modular drivers that will
allow future driver modifications to be based on the mainline (Amit
Daniel Kachhap).
- Two fixes for the cpupower tool (Michal Privoznik, Prarit
Bhargava)"
* tag 'pm+acpi-3.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / video: Add some Samsung models to disable_native_backlight list
tools / cpupower: Fix no idle state information return value
tools / cpupower: Correctly detect if running as root
cpufreq: fix a NULL pointer dereference in __cpufreq_governor()
cpufreq-dt: defer probing if OPP table is not ready
PM / OPP: take RCU lock in dev_pm_opp_get_opp_count
PM / OPP: fix warning in of_free_opp_table()
PM / OPP: add some lockdep annotations
powercap / RAPL: add IDs for future Xeon CPUs
PM / Domains: Export of_genpd_get_from_provider function
cpuidle / ACPI: remove unused CPUIDLE_FLAG_TIME_INVALID
cpuidle: ladder: Better idle duration measurement without using CPUIDLE_FLAG_TIME_INVALID
cpuidle: menu: Better idle duration measurement without using CPUIDLE_FLAG_TIME_INVALID
Linus Torvalds [Mon, 29 Dec 2014 21:30:50 +0000 (13:30 -0800)]
Merge tag 'spi-v3.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few driver specific fixes here, the DMA burst size increase in the
spfi driver is a fix to make the hardware happier in some situations"
* tag 'spi-v3.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: img-spfi: Increase DMA burst size
spi: img-spfi: Enable controller before starting TX DMA
spi: sh-msiof: Add runtime PM lock in initializing
Linus Torvalds [Mon, 29 Dec 2014 21:24:38 +0000 (13:24 -0800)]
Merge tag 'regulator-v3.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull one regulator fix from Mark Brown:
"One fix here, a fix for the voltage mapping on one of the s2mps11
regulators which broke systems using it including apparently the
Gear 2 smartwatches"
* tag 'regulator-v3.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: s2mps11: Fix dw_mmc failure on Gear 2
Linus Torvalds [Mon, 29 Dec 2014 21:13:41 +0000 (13:13 -0800)]
Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux
Pull thermal management updates from Zhang Rui:
"First of all, the most important change is the thermal cpu cooling
fixes. The major fix here is to have proper sequencing between
cpufreq layer and thermal cpu cooling registration. A take away of
this fix is an improvement in the thermal drivers code. Thermal
drivers that require cpu cooling do not need to check for cpufreq
layer. The requirement now is to propagate the error code, if any,
while registering cpu cooling device. Thanks to Viresh for
implementing the required CPUfreq changes.
Second, a new driver is introduced for int340x processor thermal
device. Given that int340x thermal is disabled by default, and this
processor thermal device is only available on limited platforms, plus
the driver does nothing but exposes some thermal limitation
information for user space to use, thus I think it is safe to include
it in this pull request after missing 3.19-rc2.
- several small fixes and cleanups for int340x thermal drivers"
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (43 commits)
Thermal/int340x/int3403: Free acpi notification handler
Thermal/int340x/processor_thermal: Fix memory leak
Thermal/int340x/int3403: Fix memory leak
thermal: int340x: Introduce processor reporting device
thermal: int340x_thermal: drop owner assignment from platform_drivers
thermal: drop owner assignment from platform_drivers
thermal: cpu_cooling: document node in struct cpufreq_cooling_device
thermal/powerclamp: add ids for future xeon cpus
Thermal/int340x: Handle properly the case when _trt or _art acpi entry is missing
thermal: cpu_cooling: return ERR_PTR() for !CPU_THERMAL or !THERMAL_OF
thermal: cpu_cooling: small memory leak on error
thermal: ti-soc-thermal: Do not print error message in the EPROBE_DEFER case
thermal: db8500: Do not print error message in the EPROBE_DEFER case
thermal: imx: Do not print error message in the EPROBE_DEFER case
thermal: Fix cdev registration with THERMAL_NO_LIMIT on 64bit
drivers: thermal: Remove ARCH_HAS_BANDGAP dependency for samsung
thermal:core:fix: Check return code of the ->get_max_state() callback
thermal: cpu_cooling: update copyright tags
thermal: cpu_cooling: Use cpufreq_dev->freq_table for finding level/freq
thermal: cpu_cooling: Store frequencies in descending order
...
Michal Hocko [Mon, 29 Dec 2014 19:30:35 +0000 (20:30 +0100)]
mm: get rid of radix tree gfp mask for pagecache_get_page
Commit 2457aec63745 ("mm: non-atomically mark page accessed during page
cache allocation where possible") has added a separate parameter for
specifying gfp mask for radix tree allocations.
Not only this is less than optimal from the API point of view because it
is error prone, it is also buggy currently because
grab_cache_page_write_begin is using GFP_KERNEL for radix tree and if
fgp_flags doesn't contain FGP_NOFS (mostly controlled by fs by
AOP_FLAG_NOFS flag) but the mapping_gfp_mask has __GFP_FS cleared then
the radix tree allocation wouldn't obey the restriction and might
recurse into filesystem and cause deadlocks. This is the case for most
filesystems unfortunately because only ext4 and gfs2 are using
AOP_FLAG_NOFS.
Let's simply remove radix_gfp_mask parameter because the allocation
context is same for both page cache and for the radix tree. Just make
sure that the radix tree gets only the sane subset of the mask (e.g. do
not pass __GFP_WRITE).
Long term it is more preferable to convert remaining users of
AOP_FLAG_NOFS to use mapping_gfp_mask instead and simplify this
interface even further.
Reported-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mmc: core: stop trying to switch width when only one bit is supported
mmc_select_bus_width() will try to switch to MMC_BUS_WIDTH_4 even if
MMC_CAP_4_BIT_DATA and MMC_CAP_8_BIT_DATA are not set in host->caps.
Return as soon as possible when those flags are not set
virtio 1.0 only requires used address to be 4 byte aligned,
vhost required 8 bytes (size of vring_used_elem).
Fix up vhost to match that.
Additionally, while vhost correctly requires 8 byte
alignment for log, it's unconnected to used ring:
it's a consequence that log has u64 entries.
Tweak code to make that clearer.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Host needs to know vring element alignment requirements:
simply doing alignof on structures doesn't work reliably: on some
platforms gcc has alignof(uint32_t) == 2.
Add macros for alignment as specified in virtio 1.0 cs01,
export them to userspace as well.
Acked-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tomi Valkeinen [Thu, 18 Dec 2014 11:40:06 +0000 (13:40 +0200)]
video/logo: prevent use of logos after they have been freed
If the probe of an fb driver has been deferred due to missing
dependencies, and the probe is later ran when a module is loaded, the
fbdev framework will try to find a logo to use.
However, the logos are __initdata, and have already been freed. This
causes sometimes page faults, if the logo memory is not mapped,
sometimes other random crashes as the logo data is invalid, and
sometimes nothing, if the fbdev decides to reject the logo (e.g. the
random value depicting the logo's height is too big).
This patch adds a late_initcall function to mark the logos as freed. In
reality the logos are freed later, and fbdev probe may be ran between
this late_initcall and the freeing of the logos. In that case we will
miss drawing the logo, even if it would be possible.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: stable@vger.kernel.org
Although this did fix the bug it was aimed at, it also broke secondary
startup on platforms that use give/take_timebase(). Unfortunately we
didn't detect that while it was in next.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Hari Bathini [Thu, 18 Dec 2014 18:06:55 +0000 (23:36 +0530)]
powerpc/kdump: Ignore failure in enabling big endian exception during crash
In LE kernel, we currently have a hack for kexec that resets the exception
endian before starting a new kernel as the kernel that is loaded could be a
big endian or a little endian kernel. In kdump case, resetting exception
endian fails when one or more cpus is disabled. But we can ignore the failure
and still go ahead, as in most cases crashkernel will be of same endianess
as primary kernel and reseting endianess is not even needed in those cases.
This patch adds a new inline function to say if this is kdump path. This
function is used at places where such a check is needed.
Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com>
[mpe: Rename to kdump_in_progress(), use bool, and edit comment] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Linus Torvalds [Sun, 28 Dec 2014 21:08:08 +0000 (13:08 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"The important fixes are for two bugs introduced by the merge window.
On top of this, add a couple of WARN_ONs and stop spamming dmesg on
pretty much every boot of a virtual machine"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvm: warn on more invariant breakage
kvm: fix sorting of memslots with base_gfn == 0
kvm: x86: drop severity of "generation wraparound" message
kvm: x86: vmx: reorder some msr writing
projects / karo-tx-linux.git / log