This patch is required for checkpoint/restore in userspace.
c/r requires some way to get all pending IPC messages without deleting
them from the queue (checkpoint can fail and in this case tasks will be
resumed, so queue have to be valid).
To achive this, new operation flag MSG_COPY for sys_msgrcv() system call
was introduced. If this flag was specified, then mtype is interpreted as
number of the message to copy.
If MSG_COPY is set, then kernel will allocate dummy message with passed
size, and then use new copy_msg() helper function to copy desired message
(instead of unlinking it from the queue).
Notes:
1) Return -ENOSYS if MSG_COPY is specified, but
CONFIG_CHECKPOINT_RESTORE is not set.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com> Cc: Serge Hallyn <serge.hallyn@canonical.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
WARNING: line over 80 characters
#33: FILE: include/linux/msg.h:39:
+ long (*msg_fill)(void __user *, struct msg_msg *, size_t ));
ERROR: space prohibited before that close parenthesis ')'
#33: FILE: include/linux/msg.h:39:
+ long (*msg_fill)(void __user *, struct msg_msg *, size_t ));
WARNING: line over 80 characters
#94: FILE: ipc/compat.c:368:
+ return do_msgrcv(first, uptr, second, msgtyp, third, compat_do_msg_fill);
ERROR: space prohibited before that close parenthesis ')'
#142: FILE: ipc/msg.c:774:
+ long (*msg_handler)(void __user *, struct msg_msg *, size_t ))
total: 2 errors, 2 warnings, 165 lines checked
./patches/ipc-message-queue-receive-cleanup.patch has style problems, please review.
If any of these errors are false positives, please report
them to the maintainer, see CHECKPATCH in MAINTAINERS.
Please run checkpatch prior to sending patches
Cc: Stanislav Kinsbursky <skinsbursky@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add 3 new variables and sysctls to tune them (by one "next_id" variable
for messages, semaphores and shared memory respectively). This variable
can be used to set desired id for next allocated IPC object. By default
it's equal to -1 and old behaviour is preserved. If this variable is
non-negative, then desired idr will be extracted from it and used as a
start value to search for free IDR slot.
Notes:
1) this patch doesn't guarantee that the new object will have desired
id. So it's up to user space how to handle new object with wrong id.
2) After a sucessful id allocation attempt, "next_id" will be set back
to -1 (if it was non-negative).
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com> Cc: Serge Hallyn <serge.hallyn@canonical.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Alan Cox [Fri, 9 Nov 2012 03:05:04 +0000 (14:05 +1100)]
fork: unshare: remove dead code
If new_nsproxy is set we will always call switch_task_namespaces and then
set new_nsproxy back to NULL so the reassignment and fall through check
are redundant
Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kees Cook [Fri, 9 Nov 2012 03:05:04 +0000 (14:05 +1100)]
/proc/pid/status: add "Seccomp" field
It is currently impossible to examine the state of seccomp for a given
process. While attaching with gdb and attempting "call
prctl(PR_GET_SECCOMP,...)" will work with some situations, it is not
reliable. If the process is in seccomp mode 1, this query will kill the
process (prctl not allowed), if the process is in mode 2 with prctl not
allowed, it will similarly be killed, and in weird cases, if prctl is
filtered to return errno 0, it can look like seccomp is disabled.
When reviewing the state of running processes, there should be a way to
externally examine the seccomp mode. ("Did this build of Chrome end up
using seccomp?" "Did my distro ship ssh with seccomp enabled?")
This adds the "Seccomp" line to /proc/$pid/status.
Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: James Morris <jmorris@namei.org> Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Andrew Morton [Fri, 9 Nov 2012 03:05:03 +0000 (14:05 +1100)]
procfs-add-vmflags-field-in-smaps-output-v4-fix
remove unneeded brakes per sfr, avoid using bloaty for_each_set_bit()
Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cyrill Gorcunov [Fri, 9 Nov 2012 03:05:03 +0000 (14:05 +1100)]
procfs: add VmFlags field in smaps output
During c/r sessions we've found that there is no way at the moment to
fetch some VMA associated flags, such as mlock() and madvise().
This leads us to a problem -- we don't know if we should call for mlock()
and/or madvise() after restore on the vma area we're bringing back to
life.
This patch intorduces a new field into "smaps" output called VmFlags,
where all set flags associated with the particular VMA is shown as two
letter mnemonics.
[ Strictly speaking for c/r we only need mlock/madvise bits but it has been
said that providing just a few flags looks somehow inconsistent. So all
flags are here now. ]
This feature is made available on CONFIG_CHECKPOINT_RESTORE=n kernels, as
other applications may start to use these fields.
The data is encoded in a somewhat awkward two letters mnemonic form, to
encourage userspace to be prepared for fields being added or removed in
the future.
[a.p.zijlstra@chello.nl: props to use for_each_set_bit]
[sfr@canb.auug.org.au: props to use array instead of struct]
[akpm@linux-foundation.org: overall redesign and simplification] Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
I suggest to hide non-existent capabilities. Here is two reasons.
* It's logically and easier for using.
* It helps to checkpoint-restore capabilities of tasks, because tasks
can be restored on another kernel, where CAP_LAST_CAP is bigger.
Signed-off-by: Andrew Vagin <avagin@openvz.org> Cc: Andrew G. Morgan <morgan@kernel.org> Reviewed-by: Serge E. Hallyn <serge.hallyn@canonical.com> Cc: Pavel Emelyanov <xemul@parallels.com> Reviewed-by: Kees Cook <keescook@chromium.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: James Morris <jmorris@namei.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Eldad Zack [Fri, 9 Nov 2012 03:05:02 +0000 (14:05 +1100)]
simple_strto*: annotate function as obsolete
Update the documentation for simple_strto* to reflect that it has been
obsoleted and advise the usage of kstrto*.
Signed-off-by: Eldad Zack <eldad@fogrefinery.com> Cc: J. Bruce Fields <bfields@fieldses.org> Cc: Joe Perches <joe@perches.com> Cc: Randy Dunlap <rdunlap@xenotime.net> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Rob Landley <rob@landley.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Eldad Zack [Fri, 9 Nov 2012 03:05:02 +0000 (14:05 +1100)]
kstrto*: add documentation
As Bruce Fields pointed out, kstrto* is currently lacking kerneldoc
comments. This patch adds kerneldoc comments to common variants of
kstrto*: kstrto(u)l, kstrto(u)ll and kstrto(u)int.
Signed-off-by: Eldad Zack <eldad@fogrefinery.com> Cc: J. Bruce Fields <bfields@fieldses.org> Cc: Joe Perches <joe@perches.com> Cc: Randy Dunlap <rdunlap@xenotime.net> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Rob Landley <rob@landley.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
hfsplus: code style fixes - reworked support of extended attributes
This patch fixes code style issues:
1. Rephrase comment.
2. Fix multiline comment style.
3. The hfsplus_alloc_attr_entry() was corrected.
4. The hfsplus_unistr and hfsplus_attr_unistr structures were declared
independently.
Signed-off-by: Vyacheslav Dubeyko <slava@dubeyko.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
hfsplus: add on-disk layout declarations related to attributes tree
Current mainline implementation of hfsplus file system driver treats as
extended attributes only two fields (fdType and fdCreator) of user_info
field in file description record (struct hfsplus_cat_file). It is
possible to get or set only these two fields as extended attributes. But
HFS+ treats as com.apple.FinderInfo extended attribute an union of
user_info and finder_info fields as for file (struct hfsplus_cat_file) as
for folder (struct hfsplus_cat_folder). Moreover, current mainline
implementation of hfsplus file system driver doesn't support special
metadata file - attributes tree.
Mac OS X 10.4 and later support extended attributes by making use of the
HFS+ filesystem Attributes file B*-tree feature which allows for named
forks. Mac OS X supports only inline extended attributes, limiting their
size to 3802 bytes. Any regular file may have a list of extended
attributes. HFS+ supports an arbitrary number of named forks. Each
attribute is denoted by a name and the associated data. The name is a
null-terminated Unicode string. It is possible to list, to get, to set,
and to remove extended attributes from files or directories.
It exists some peculiarity during getting of extended attributes list by
means of getfattr utility. The getfattr utility expects prefix "user."
before any extended attribute's name. So, it ignores any names that don't
contained such prefix. Such behavior of getfattr utility results in
unexpected empty output of extended attributes list even in the case when
file (or folder) contains extended attributes. It needs to use empty
string as regular expression pattern for names matching (getfattr
--match="").
For support of extended attributes in HFS+:
1. It was added necessary on-disk layout declarations related to
Attributes tree into hfsplus_raw.h file.
2. It was added attributes.c file with implementation of functionality
of manipulation by records in Attributes tree.
3. It was reworked hfsplus_listxattr, hfsplus_getxattr,
hfsplus_setxattr functions in ioctl.c. Moreover, it was added
hfsplus_removexattr method.
This patch:
Add all neccessary on-disk layout declarations related to attributes
file.
Signed-off-by: Vyacheslav Dubeyko <slava@dubeyko.com> Reported-by: Hin-Tak Leung <htl10@users.sourceforge.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Cc: Jan Kara <jack@suse.cz> Tested-by: Hin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Deepak Sikri [Fri, 9 Nov 2012 03:04:59 +0000 (14:04 +1100)]
rtc: rtc-spear: Provide flag for no support of UIE mode
The applications can set the RTC hardware to trigger interrupts in one
of three modes:
* AIE: Alarm interrupt
* UIE: Update interrupt (ie: once per second)
* PIE: Periodic interrupt (sub-second irqs)
The above defined 3 modes are to be supported in the RTC HW in form of
interrupts. The SPEAr RTC hardware does not support the later two modes.
There have been refinements in the RTC core in mainline related to
use of timer queue infrastructure to manage events in RTC. Please refer
the below mentioned patch for details:
* RTC: Rework RTC code to use timerqueue for events
* SHA ID: 6610e0893b8bc6f59b14fed7f089c5997f035f88
There have been provisions added to support hardware that do not have
support the UIE mode. Please refer the following patch.
* rtc: Provide flag for rtc devices that don't support UIE
* SHA ID: 4a649903f91232d02284d53724b0a45728111767
The patch makes use of the provision defined in the above patch to
update the hardware status of UIE mode.
Deepak Sikri [Fri, 9 Nov 2012 03:04:59 +0000 (14:04 +1100)]
rtc: rtc-spear: Add clk_{un}prepare() support
clk_{un}prepare is mandatory for platforms using common clock framework.
Because for SPEAr we don't do anything in clk_{un}prepare() calls, just
call them once in probe/remove.
Viresh Kumar [Fri, 9 Nov 2012 03:04:59 +0000 (14:04 +1100)]
rtc: rtc-spear: use devm_*() routines
Free the rtc-spear driver from tension of freeing resources :) devm_*
derivatives of multiple routines are used while allocating resources,
which would be freed automatically by kernel.
In case of error, test_init() needs to call platform_device_del() instead
of platform_device_unregister(). Otherwise, we may call
platform_device_put() twice.
dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)
Roland Stigge [Fri, 9 Nov 2012 03:04:57 +0000 (14:04 +1100)]
ARM: mach-imx: support for DryIce RTC in i.MX53
Enable support for i.MX53 in addition to i.MX25 by providing a dummy clock
on i.MX53 since this one doesn't have a separate clock for internal RTC
but the driver requests one.
Signed-off-by: Roland Stigge <stigge@antcom.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Roland Stigge [Fri, 9 Nov 2012 03:04:57 +0000 (14:04 +1100)]
drivers/rtc/rtc-imxdi.c: add devicetree support
Add device tree support to the rtc-imxdi driver.
Signed-off-by: Roland Stigge <stigge@antcom.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Roland Stigge [Fri, 9 Nov 2012 03:04:57 +0000 (14:04 +1100)]
drivers/rtc/rtc-imxdi: support for i.MX53
Enable support for i.MX53 in addition to i.MX25 by enabling the driver on
ARCH_MXC generally.
Signed-off-by: Roland Stigge <stigge@antcom.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
OMAP1 RTC driver is used in multiple devices like, OMAPL138 and AM33XX.
Driver currently doesn't handle any clocks, which may be right for OMAP1
architecture but in case of AM33XX, the clock/module needs to be enabled
in order to access the registers.
So convert this driver to runtime pm, which internally handles rest.
[afzal@ti.com: handle error path] Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Afzal Mohammed <afzal@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Daniel Mack <zonque@gmail.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Afzal Mohammed [Fri, 9 Nov 2012 03:04:56 +0000 (14:04 +1100)]
rtc: omap: depend on am33xx
rtc-omap driver can be reused for AM33xx RTC. Provide dependency in
Kconfig.
Signed-off-by: Afzal Mohammed <afzal@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Daniel Mack <zonque@gmail.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Afzal Mohammed [Fri, 9 Nov 2012 03:04:56 +0000 (14:04 +1100)]
rtc: omap: dt support
Enhance rtc-omap driver with DT capability
Signed-off-by: Afzal Mohammed <afzal@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Daniel Mack <zonque@gmail.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Afzal Mohammed [Fri, 9 Nov 2012 03:04:55 +0000 (14:04 +1100)]
ARM: davinci: remove rtc kicker release
rtc-omap driver is now capable of handling kicker mechanism, hence remove
kicker handling at platform level, instead provide proper device name so
that driver can handle kicker mechanism by itself
Signed-off-by: Afzal Mohammed <afzal@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Daniel Mack <zonque@gmail.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Afzal Mohammed [Fri, 9 Nov 2012 03:04:55 +0000 (14:04 +1100)]
rtc: omap: kicker mechanism support
OMAP RTC IP can have kicker feature. This prevents spurious writes to
register. To write to registers kicker lock has to be released.
Procedure to do it as follows,
1. write to kick0 register, 0x83e70b13
2. write to kick1 register, 0x95a4f1e0
Writing value other than 0x83e70b13 to kick0 enables write locking, more
details about kicker mechanism can be found in section 20.3.3.5.3 of
AM335X TRM @www.ti.com/am335x
Here id table information is added and is used to distinguish those that
require kicker handling and the ones that doesn't need it. There are more
features in the newer IP's compared to legacy ones other than kicker,
which driver currently doesn't handle, supporting additional features
would be easier with the addition of id table.
Older IP (of OMAP1) doesn't have revision register as per TRM, so revision
register can't be relied always to find features, hence id table is being
used.
While at it, replace __raw_writeb/__raw_readb with writeb/readb; this
driver is used on ARMv7 (AM335X SoC)
Signed-off-by: Afzal Mohammed <afzal@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Daniel Mack <zonque@gmail.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Alan Cox [Fri, 9 Nov 2012 03:04:55 +0000 (14:04 +1100)]
binfmt_elf: fix corner case kfree of uninitialized data
If elf_core_dump() is called and fill_note_info() fails in the kmalloc()
then it returns 0 but has not yet initialised all the needed fields. As a
result we do a kfree(randomness) after correctly skipping the thread data.
Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Paton J. Lewis [Fri, 9 Nov 2012 03:04:54 +0000 (14:04 +1100)]
epoll: support for disabling items, and a self-test app
It is not currently possible to reliably delete epoll items when using the
same epoll set from multiple threads. After calling epoll_ctl with
EPOLL_CTL_DEL, another thread might still be executing code related to an
event for that epoll item (in response to epoll_wait). Therefore the
deleting thread does not know when it is safe to delete resources
pertaining to the associated epoll item because another thread might be
using those resources.
The deleting thread could wait an arbitrary amount of time after calling
epoll_ctl with EPOLL_CTL_DEL and before deleting the item, but this is
inefficient and could result in the destruction of resources before
another thread is done handling an event returned by epoll_wait.
This patch enhances epoll_ctl to support EPOLL_CTL_DISABLE, which disables
an epoll item. If epoll_ctl returns -EBUSY in this case, then another
thread may handling a return from epoll_wait for this item. Otherwise if
epoll_ctl returns 0, then it is safe to delete the epoll item. This
allows multiple threads to use a mutex to determine when it is safe to
delete an epoll item and its associated resources, which allows epoll
items to be deleted both efficiently and without error in a multi-threaded
environment. Note that EPOLL_CTL_DISABLE is only useful in conjunction
with EPOLLONESHOT, and using EPOLL_CTL_DISABLE on an epoll item without
EPOLLONESHOT returns -EINVAL.
This patch also adds a new test_epoll self-test program to both
demonstrate the need for this feature and test it.
Signed-off-by: Paton J. Lewis <palewis@adobe.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Jason Baron <jbaron@redhat.com> Cc: Paul Holland <pholland@adobe.com> Cc: Davide Libenzi <davidel@xmailserver.org> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Joe Perches [Fri, 9 Nov 2012 03:04:54 +0000 (14:04 +1100)]
checkpatch: warn on unnecessary line continuations
When the previous line is not a line continuation and the current line has
a line continuation but is not a #define, emit a warning.
Signed-off-by: Joe Perches <joe@perches.com> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Andy Whitcroft <apw@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This function is used by sparc, powerpc tile and arm64 for compat support.
The patch adds a generic implementation with a wrapper for PowerPC to do
the u32->int sign extension.
The reason for a single patch covering powerpc, tile, sparc and arm64 is
to keep it bisectable, otherwise kernel building may fail with mismatched
function declarations.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Chris Metcalf <cmetcalf@tilera.com> [for tile] Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Oleg Nesterov [Fri, 9 Nov 2012 03:04:52 +0000 (14:04 +1100)]
percpu_rw_semaphore: reimplement to not block the readers unnecessarily
Currently the writer does msleep() plus synchronize_sched() 3 times to
acquire/release the semaphore, and during this time the readers are
blocked completely. Even if the "write" section was not actually started
or if it was already finished.
With this patch down_write/up_write does synchronize_sched() twice and
down_read/up_read are still possible during this time, just they use the
slow path.
percpu_down_write() first forces the readers to use rw_semaphore and
increment the "slow" counter to take the lock for reading, then it
takes that rw_semaphore for writing and blocks the readers.
Also. With this patch the code relies on the documented behaviour of
synchronize_sched(), it doesn't try to pair synchronize_sched() with
barrier.
Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anton Arapov <anton@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jan Beulich [Fri, 9 Nov 2012 03:04:52 +0000 (14:04 +1100)]
sscanf: don't ignore field widths for numeric conversions
This is another step towards better standard conformance. Rather than
adding a local buffer to store the specified portion of the string (with
the need to enforce an arbitrary maximum supported width to limit the
buffer size), do a maximum width conversion and then drop as much of it as
is necessary to meet the caller's request.
Also fail on negative field widths.
Uses the deprecated simple_strto*() functions because kstrtoXX() fail on
non-zero terminated strings.
Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Andy Shevchenko [Fri, 9 Nov 2012 03:04:51 +0000 (14:04 +1100)]
drivers/of/fdt.c: re-use kernel's kbasename()
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Andy Shevchenko [Fri, 9 Nov 2012 03:04:50 +0000 (14:04 +1100)]
lib: dynamic_debug: use kbasename()
Remove the custom implementation of the functionality similar to kbasename().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Jason Baron <jbaron@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Andy Shevchenko [Fri, 9 Nov 2012 03:04:50 +0000 (14:04 +1100)]
string: introduce helper to get base file name from given path
There are several places in the kernel that use functionality like
basename(3) with the exception: in case of '/foo/bar/' we expect to get an
empty string. Let's do it common helper for them.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Jason Baron <jbaron@redhat.com> Cc: YAMANE Toshiaki <yamanetoshi@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
WARNING: drivers/video/backlight/built-in.o(.data+0x110): Section mismatch in reference from the variable ep93xxbl_driver to the
function .init.text:ep93xxbl_probe()
The variable ep93xxbl_driver references
the function __init ep93xxbl_probe()
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or name the variable:
*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Axel Lin [Fri, 9 Nov 2012 03:04:48 +0000 (14:04 +1100)]
drivers/video/backlight/lm3639_bl.c: fix up world writable sysfs file
We don't need the sysfs file to be world writable or group writable.
This file is write-only, change it to S_IWUSR (0200).
Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: "G.Shark Jeong" <gshark.jeong@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jingoo Han [Fri, 9 Nov 2012 03:04:48 +0000 (14:04 +1100)]
drivers/video/backlight/max8925_bl.c: drop devm_kfree of devm_kzalloc'd data
devm_kfree() allocates memory that is released when a driver detaches.
Thus, there is no reason to explicitly call devm_kfree in probe or remove
functions.
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jingoo Han [Fri, 9 Nov 2012 03:04:48 +0000 (14:04 +1100)]
drivers/video/backlight/88pm860x_bl.c: drop devm_kfree of devm_kzalloc'd data
devm_kfree() allocates memory that is released when a driver detaches.
Thus, there is no reason to explicitly call devm_kfree() in probe or remove
functions.
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add 'const' to static array that was missing it in its definition. Also,
'const' is added to ili9320_write_regs(), because it is called by
vgg2432a4 driver.
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add 'const' to static array that was missing it in its definition.
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add 'const' to static array that was missing it in its definition.
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Marek Vasut <marex@denx.de> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The mutex for accessing lp855x registers is used in case of the user-space
interaction. When the brightness is changed via sysfs, the mutex is
required. But the backlight class device already provides it. Thus, the
lp855x mutex is unnecessary.
Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Cc: Thierry Reding <thierry.reding@avionic-design.de> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Bryan Wu <bryan.wu@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kim, Milo [Fri, 9 Nov 2012 03:04:45 +0000 (14:04 +1100)]
drivers/video/backlight/lp855x_bl.c: use generic PWM functions
The LP855x family devices support the PWM input for the backlight control.
Period of the PWM is configurable in the platform side. Platform
specific functions are unnecessary anymore because generic PWM functions
are used inside the driver.
(PWM input mode)
To set the brightness, new lp855x_pwm_ctrl() is used.
If a PWM device is not allocated, devm_pwm_get() is called.
The PWM consumer name is from the chip name such as 'lp8550' and 'lp8556'.
To get the brightness value, no additional handling is required.
Just the value of 'props.brightness' is returned.
If the PWM driver is not ready while initializing the LP855x driver, it's
OK. The PWM device can be retrieved later, when the brightness value is
changed.
Documentation is updated with an example.
Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Cc: Thierry Reding <thierry.reding@avionic-design.de> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Bryan Wu <bryan.wu@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jingoo Han [Fri, 9 Nov 2012 03:04:45 +0000 (14:04 +1100)]
backlight: tosa: use devm_gpio_request_one
By using devm_gpio_request_one it is possible to set the direction and
initial value in one shot. Thus, using devm_gpio_request_one can make the
code simpler.
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jingoo Han [Fri, 9 Nov 2012 03:04:44 +0000 (14:04 +1100)]
backlight: lms283gf05: use devm_gpio_request_one
By using devm_gpio_request_one it is possible to set the direction
and initial value in one shot. Thus, using devm_gpio_request_one
can make the code simpler.
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jingoo Han [Fri, 9 Nov 2012 03:04:42 +0000 (14:04 +1100)]
backlight: locomolcd: fix checkpatch error and warning
This patch fixes the checkpatch error and warning as below:
WARNING: line over 80 characters
WARNING: space prohibited between function name and open parenthesis '('
ERROR: trailing statements should be on next line
Also, long comments are fixed for the preferred style and
unnecessary lines are removed.
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jingoo Han [Fri, 9 Nov 2012 03:04:41 +0000 (14:04 +1100)]
backlight: ili9320: fix checkpatch error and warning
This patch fixes the checkpatch error and warning as below:
WARNING: please, no space before tabs
WARNING: please, no spaces at the start of a line
WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
WARNING: braces {} are not necessary for single statement blocks
ERROR: code indent should use tabs where possible
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jingoo Han [Fri, 9 Nov 2012 03:04:41 +0000 (14:04 +1100)]
backlight: hp680_bl: fix checkpatch error and warning
This patch fixes the checkpatch error and warning as below:
WARNING: please, no space before tabs
WARNING: please, no spaces at the start of a line
ERROR: do not initialise statics to 0 or NULL
ERROR: code indent should use tabs where possible
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jingoo Han [Fri, 9 Nov 2012 03:04:39 +0000 (14:04 +1100)]
backlight: da903x_bl: use dev_get_drvdata() instead of platform_get_drvdata()
dev_get_drvdata() can be used instead of platform_get_drvdata()
to make the code smaller.
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matthew Leach [Fri, 9 Nov 2012 03:04:37 +0000 (14:04 +1100)]
include/linux/init.h: use the stringify operator for the __define_initcall macro
Currently the __define_initcall() macro takes three arguments, fn, id and
level. The level argument is exactly the same as the id argument but
wrapped in quotes. To overcome this need to specify three arguments to
the __define_initcall macro, where one argument is the stringification of
another, we can just use the stringification macro instead.
Signed-off-by: Matthew Leach <matthew@mattleach.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Wen Congyang [Fri, 9 Nov 2012 03:04:37 +0000 (14:04 +1100)]
Documentation/kernel-parameters.txt: update mem= option's spec according to its implementation
Current mem= implementation seems buggy because the specification and
implementation don't match. The current mem= has been working for many
years and it's not buggy - it works as expected. So we should update the
specification.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Cc: Rob Landley <rob@landley.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
PBM generated with current tools do not have a whitespace between the
digits. Therefore the pnmtologo tool fails to gernerate the required
C-Array for these images. This patch fixes that behaviour and can handle
both 'old style' and 'new style' PBM files.
Signed-off-by: Andreas Bießmann <andreas@biessmann.de> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Wanpeng Li [Fri, 9 Nov 2012 03:04:36 +0000 (14:04 +1100)]
mm/memblock: reduce overhead in binary search
When checking that the indicated address belongs to the memory region, the
memory regions are checked one by one through a binary search, which will
be time consuming.
If the indicated address isn't in the memory region, then we needn't do
the time-consuming search. Add a check on the indicated address for that
purpose.
Signed-off-by: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Gavin Shan <shangw@linux.vnet.ibm.com> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
projects / karo-tx-linux.git / log