Daniel Vetter [Sun, 2 Mar 2014 20:18:00 +0000 (21:18 +0100)]
drm/i915: sprinkle static
Apparently we've missed a few more than what Fengguang's 0-day tester
recently reported in i915_irq.c ... Makes sparse happy again (ignore
some spurious stuff about ksyms of exported functions).
Cc: kbuild test robot <fengguang.wu@intel.com> Cc: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Fri, 14 Feb 2014 13:06:06 +0000 (14:06 +0100)]
drm/i915: tune down user-triggerable dmesg noise in the cursor/overlay code
Spotted while auditing the code for fencing issues.
Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Fri, 14 Feb 2014 13:01:21 +0000 (14:01 +0100)]
drm/i915: Only bind each object rather than for every execbuffer
One side-effect of the introduction of ppgtt was that we needed to
rebind the object into the appropriate vm (and global gtt in some
peculiar cases). For simplicity this was done twice for every object on
every call to execbuffer. However, that adds a tremendous amount of CPU
overhead (rewriting all the PTE for all objects into WC memory) per
draw. The fix is to push all the decision about which vm to bind into
and when down into the low-level bind routines through hints rather than
performing the bind unconditionally in the execbuffer routine.
Note that this is a regression introduced in the full ppgtt feature
branch, before this we've only done re-bound objects when the relevant
has_(aliasing_ppgtt|global_gtt)_mapping flag was clear. But since
that's per-object and not per-vma that optimization broke.
v2: Split out prep work and unrelated changes.
v3: Bring back functional change around PIN_GLOBAL that I've
accidentally split out.
v4: Remove the temporary hack for the old binding logic to avoid
bisection issues.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=72906 Tested-by: jianx.zhou@intel.com Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (v1) Cc: Ben Widawsky <benjamin.widawsky@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Fri, 14 Feb 2014 13:01:20 +0000 (14:01 +0100)]
drm/i915: Directly return the vma from bind_to_vm
This is prep work for reworking the object_pin logic. Atm
it still does a (now redundant) lookup of the vma. The next
patch will fix this.
Split out from Chris vma-bind rework.
Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ben Widawsky <benjamin.widawsky@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Fri, 14 Feb 2014 13:01:19 +0000 (14:01 +0100)]
drm/i915: Simplify i915_gem_object_ggtt_unpin
Split out from Chris vma-bind rework.
Jani wondered why this is save, and the reason is that i915_vma_unbind
does all these checks, too. So they're redundant.
Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ben Widawsky <benjamin.widawsky@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Fri, 14 Feb 2014 13:01:18 +0000 (14:01 +0100)]
drm/i915: Allow blocking in the PDE alloc when running low on gtt space
There's no need not to, really.
Split out from Chris vma-bind rework.
Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ben Widawsky <benjamin.widawsky@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Fri, 14 Feb 2014 13:01:17 +0000 (14:01 +0100)]
drm/i915: Don't allocate context pages as mappable
Only the hardware really access them, so no need to have cpu
gtt access available.
Split out from Chris vma-bind rework.
Note that this is only possible due to the split-up of the mappable
pin flag into PIN_GLOBAL and PIN_MAPPABLE.
Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ben Widawsky <benjamin.widawsky@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Fri, 14 Feb 2014 13:01:16 +0000 (14:01 +0100)]
drm/i915: Handle set_cache_level errors in the status page setup
Split out from Chris vma-bind rework.
Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ben Widawsky <benjamin.widawsky@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Fri, 14 Feb 2014 13:01:15 +0000 (14:01 +0100)]
drm/i915: Don't pin the status page as mappable
We access it through the cpu window. No functional difference expected
atm since we default to a bottom-up allocation scheme. But that might
eventually change so that we prefer the unmappable range for buffers
that don't need cpu gtt access.
Split out from Chris vma-bind rework.
Note that this is only possible due to the split-up of the mappable
pin flag into PIN_GLOBAL and PIN_MAPPABLE.
Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ben Widawsky <benjamin.widawsky@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Fri, 14 Feb 2014 13:01:14 +0000 (14:01 +0100)]
drm/i915: Don't set PIN_MAPPABLE for legacy ringbuffers
Tighter code since legacy gem has only mappable anyway.
Split out from Chris vma-bind rework.
Note that this is only possible due to the split-up of the mappable
pin flag into PIN_GLOBAL and PIN_MAPPABLE.
Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ben Widawsky <benjamin.widawsky@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Fri, 14 Feb 2014 13:01:13 +0000 (14:01 +0100)]
drm/i915: Handle set_cache_level errors in the pipe control scratch setup
Split out from Chris vma-bind rework.
Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ben Widawsky <benjamin.widawsky@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Fri, 14 Feb 2014 13:01:12 +0000 (14:01 +0100)]
drm/i915: split PIN_GLOBAL out from PIN_MAPPABLE
With abitrary pin flags it makes sense to split out a "please bind
this into global gtt" from the "please allocate in the mappable
range".
Use this unconditionally in our global gtt pin helper since this is
what its callers want. Later patches will drop PIN_MAPPABLE where it's
not strictly needed.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Fri, 14 Feb 2014 13:01:11 +0000 (14:01 +0100)]
drm/i915: Consolidate binding parameters into flags
Anything more than just one bool parameter is just a pain to read,
symbolic constants are much better.
Split out from Chris' vma-binding rework patch.
v2: Undo the behaviour change in object_pin that Chris spotted.
v3: Split out misplaced hunk to handle set_cache_level errors,
spotted by Jani.
v4: Keep the current over-zealous binding logic in the execbuffer code
working with a quick hack while the overall binding code gets shuffled
around.
v5: Reorder the PIN_ flags for more natural patch splitup.
v6: Pull out the PIN_GLOBAL split-up again.
Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ben Widawsky <benjamin.widawsky@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Imre Deak [Tue, 11 Feb 2014 15:12:51 +0000 (17:12 +0200)]
drm/i915: sdvo: add i2c sysfs symlink to the connector's directory
This is the same what we do for DP connectors, so make things more
consistent.
Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Antti Koskipää <antti.koskipaa@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Imre Deak [Tue, 11 Feb 2014 15:12:50 +0000 (17:12 +0200)]
drm/i915: sdvo: fix error path in sdvo_connector_init
Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Antti Koskipää <antti.koskipaa@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Imre Deak [Tue, 11 Feb 2014 15:12:49 +0000 (17:12 +0200)]
drm/i915: dp: fix order of dp aux i2c device cleanup
Atm we set the parent of the dp i2c device to be the correspondig
connector device. During driver cleanup we first remove the connector
device through intel_modeset_cleanup()->drm_sysfs_connector_remove() and
only after that the i2c device through the encoder's destroy callback.
This order is not supported by the device core and we'll get a warning,
see the below bugzilla ticket. The proper order is to remove first any
child device and only then the parent device.
The first part of the fix changes the i2c device's parent to be the drm
device. Its logical owner is not the connector anyway, but the encoder.
Since the encoder doesn't have a device object, the next best choice is
the drm device. This is the same what we do in the case of the sdvo i2c
device and what the nouveau driver does.
The second part creates a symlink in the connector's sysfs directory
pointing to the i2c device. This is so, that we keep the current ABI,
which also makes sense in case someone wants to look up the i2c device
belonging to a specific connector.
Reference: http://lists.freedesktop.org/archives/intel-gfx/2014-January/038782.html
Reference: http://lists.freedesktop.org/archives/intel-gfx/2014-February/039427.html
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=70523 Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Antti Koskipää <antti.koskipaa@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
it became clear that we need to separate the unload sequence into two
parts:
1. remove all interfaces through which new operations on some object
(crtc, encoder, connector) can be started and make sure all pending
operations are completed
2. do the actual tear down of the internal representation of the above
objects
The above commit achieved this separation for connectors by splitting
out the sysfs removal part from the connector's destroy callback and
doing this removal before calling drm_mode_config_cleanup() which does
the actual tear-down of all the drm objects.
Since we'll have to customize the interface removal part for different
types of connectors in the upcoming patches, add a new unregister
callback and move the interface removal part to it.
No functional change.
Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Antti Koskipää <antti.koskipaa@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Testcase: igt/pm_pc8 (do a full run, it will fail at the debugfs-read subtest) Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
[danvet: Flip around NULL check for robustness.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Damien Lespiau [Thu, 13 Feb 2014 18:56:15 +0000 (18:56 +0000)]
drm/i915/lvds: Remove dead code from failing case
Coverity points out that, if we end up in the 'failed' label, that's
precisely because we couldn't retrieve a fixed mode (ie fixed_mode is
NULL) and then "if (fixed_mode)" is always false.
Remove that dead code.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jesse Barnes [Wed, 12 Feb 2014 23:03:40 +0000 (15:03 -0800)]
drm/i915: don't preserve inherited configs with nothing on v2
It can be corrected later and may be what was actually desired, but
generally isn't, so if we find nothing is enabled, let the core DRM fb
helper figure something out.
v2: free the array too (Jesse)
Note that this also undoes any changes in case we bail out due to hw
cloning.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ben Widawsky [Wed, 12 Feb 2014 22:28:44 +0000 (14:28 -0800)]
drm/i915/bdw: Split up PPGTT cleanup
This will make the code more readable, and extensible which is needed
for upcoming feature work. Eventually, we'll do the same for init.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The BIOS or boot loader will generally create an initial display
configuration for us that includes some set of active pipes and
displays. This routine tries to figure out which pipes and connectors
are active and stuffs them into the crtcs and modes array given to us by
the drm_fb_helper code.
The overall sequence is:
intel_fbdev_init - from driver load
intel_fbdev_init_bios - initialize the intel_fbdev using BIOS data
drm_fb_helper_init - build fb helper structs
drm_fb_helper_single_add_all_connectors - more fb helper structs
intel_fbdev_initial_config - apply the config
drm_fb_helper_initial_config - call ->probe then register_framebuffer()
drm_setup_crtcs - build crtc config for fbdev
intel_fb_initial_config - find active connectors etc
drm_fb_helper_single_fb_probe - set up fbdev
intelfb_create - re-use or alloc fb, build out fbdev structs
v2: use BIOS connector config unconditionally if possible (Daniel)
check for crtc cloning and reject (Daniel)
fix up comments (Daniel)
v3: use command line args and preferred modes first (Ville)
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[danvet: Re-add the WARN_ON for a missing encoder crtc - the state
sanitizer should take care of this. And spell-ocd the comments.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Wed, 12 Feb 2014 16:55:36 +0000 (17:55 +0100)]
drm/i915: Some polish for the new pipestat_irq_handler
Just a bit of polish which I hope will help me with massaging some
internal patches to use Imre's reworked pipestat handling:
- Don't check for underrun reporting or enable pipestat interrupts
twice.
- Frob the comments a bit.
- Do the iir PIPE_EVENT to pipe mapping explicitly with a switch. We
only have one place which does this, so better to make it explicit.
v2: Ville noticed that I've broken the logic a bit with trying to
avoid checking whether we're interested in a given pipe twice. push
the PIPESTAT read down after we've computed the mask of interesting
bits first to avoid that duplication properly.
v3: Squash in fixups from Imre on irc.
Cc: Imre Deak <imre.deak@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jesse Barnes [Tue, 11 Feb 2014 23:28:56 +0000 (15:28 -0800)]
drm/i915: read out hw state earlier v2
We want to do this early on before we try to fetch the plane config,
which depends on some of the pipe config state.
Note that the important part is that we do this before we initialize
gem, since otherwise we can't properly pre-reserve the stolen memory
for framebuffers inherited from the bios.
v2: split back out from get_plane_config change (Daniel)
update for recent locking & reset changes (Jesse)
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
[danvet: Explain a bit more why we need to move this.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Imre Deak [Tue, 11 Feb 2014 22:01:10 +0000 (00:01 +0200)]
drm/i915: unbind fbs from crtcs during driver unload
So far during driver unload we called drm_framebuffer_cleanup() for the
fbdev fb, which only removes the fb from the drm fb list regardless of
its reference count, but leaves the fb bound on an active crtc. Since
the fb's backing storage was freed this could mean we scan some random
memory content out afterwards. It's not a big issue since the fb is
allocated from stolen memory and afaik there is no other user for that
than i915. It's still cleaner to properly unbind the fb and disable the
crtc, which is what drm_framebuffer_remove() does.
we call drm_framebuffer_cleanup() only after dropping the last reference
on the fb, but that won't happen since we don't unbind the fb. This
results in a drm core warn about a leaked fb.
Signed-off-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ben Widawsky [Wed, 29 Jan 2014 04:25:38 +0000 (20:25 -0800)]
drm/i915: Clarify RC6 enabling
At one time, we though all future platforms would have the deeper RC6
states. As it turned out, they killed it after Ivybridge, and began
using other means to achieve the power savings (the stuff we need to get
to PC7+).
The enable function was left in a weird state of odd corner cases as a
result. Since the future is now, and we also have some insight into
what's currently the future, we have an opportunity to simplify, and
future proof the function.
NOTE: VLV will be addressed in a subsequent patch. This patch was trying
not to change functionality.
NOTE2: All callers sanitize the return value anyway, so this patch is
simply to have the code make a bit more sense.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by: Deepak S <deepak.s@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Paulo Zanoni [Fri, 17 Jan 2014 15:51:13 +0000 (13:51 -0200)]
drm/i915: WARN in case we're enabling the pipe and it's enabled
... and QUIRK_PIPEA_FORCE is not present.
I initially thought that case was impossible and just added a WARN on
it, but then I was told this case is possible due to
QUIRK_PIPEA_FORCE. So let's add a WARN that serves two purposes:
- tell us in case we have done something wrong;
- document the only case where we expect this.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Paulo Zanoni [Fri, 17 Jan 2014 15:51:12 +0000 (13:51 -0200)]
drm/i915: remove wait_for_vblank argument form intel_enable_pipe
Add a nice comment explaining why we shouldn't wait for a vblank on
all cases, wait based on the HW gen, and add a comment saying we
should probably skip that wait on some of the previous HW gens.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Paulo Zanoni [Thu, 19 Dec 2013 21:12:31 +0000 (19:12 -0200)]
drm/i915: remove the vblank_wait hack from HSW+
When I forked haswell_crtc_enable I copied all the code from
ironlake_crtc_enable. The last piece of the function contains a big
comment with a call to intel_wait_for_vblank. After this fork, we
rearranged the Haswell code so that it enables the planes as the very
last step of the modeset sequence, so we're sure that we call
intel_enable_primary_plane after the pipe is really running, so the
vblank waiting functions work as expected. I really believe this is
what fixes the problem described by the big comment, so let's give it
a try and get rid of that intel_wait_for_vblank, saving around 16ms
per modeset (and init/resume). We can always revert if needed :)
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Paulo Zanoni [Thu, 19 Dec 2013 21:12:30 +0000 (19:12 -0200)]
drm/i915: don't wait for vblank after enabling pipe on HSW
Because on Haswell, the pipe is never running at this point, so we hit
the 50ms timeout waiting for nothing. We already have two other places
where we wait for vblanks on haswell_crtc_enable, so we're safe.
This gets us rid of one instance of "vblank wait timed out" for each
mode set, which means driver init and resume are also 50ms faster.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Paulo Zanoni [Thu, 19 Dec 2013 21:12:29 +0000 (19:12 -0200)]
drm/i915: add wait_for_vblank argument to intel_enable_pipe
Depending on the HW gen and the connector type, the pipe won't start
running right after we call intel_enable_pipe, so that
intel_wait_for_vblank call we currently have will just sit there for
the full 50ms timeout. So this patch adds an argument that will allow
us to avoid the vblank wait in case we want. Currently all the callers
still request for the vblank wait, so the behavior should still be the
same.
We also added a POSTING_READ on the register: previously
intel_wait_for_vblank was acting as a POSTING_READ, but now if
wait_for_vblank is false we'll stkip it, so we need an explicit
POSTING_READ.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Vandana Kannan [Tue, 11 Feb 2014 08:56:36 +0000 (14:26 +0530)]
drm/i915: Initialize downclock mode in panel init
Instead of modifying intel_panel in lvds_init_connector/dsi_init/
edp_init_connector, making changes to move intel_panel->downclock_mode
initialization to intel_panel_init()
v2: Jani's review comments incorporated
Removed downclock_mode local variable in dsi_init and
edp_init_connector
Signed-off-by: Vandana Kannan <vandana.kannan@intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jesse Barnes [Fri, 7 Feb 2014 20:48:15 +0000 (12:48 -0800)]
drm/i915: add a display info file to debugfs v2
Can be expanded up on to include all sorts of things (HDMI infoframe
data, more DP status, etc). Should be useful for bug reports to get a
baseline on the display config and info.
v2: use seq_putc (Rodrigo)
describe mode field names (Rodrigo)
Daniel Vetter [Mon, 10 Feb 2014 17:00:39 +0000 (18:00 +0100)]
drm/i915: Fix error path leak in fbdev fb allocation
In Jesse's patch to switch the fbdev framebuffer from an embedded
struct to a pointer the kfree in case of an error was missed. Fix this
up by using our own internal fb allocation helper directly instead of
reinventing that wheel.
We need a to_intel_framebuffer cast unfortunately since all the other
callers of _create still look better whith using a drm_framebuffer as
return pointer.
v2: Add an unlocked __intel_framebuffer_create function since our
dev->struct_mutex locking is too much a mess. With ppgtt we even need
it to take a look at the global gtt offset of pinned objects, since
the vma list might chance from underneath us. At least with the
current global gtt lookup functions. Reported by Mika.
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Mon, 10 Feb 2014 17:00:38 +0000 (18:00 +0100)]
drm/i915: Use normal fb deref for the fbcon framebuffer
Now that it's a normally kmalloce buffer we can use the usual cleanup
paths. The upside here is that if we get the refcounting wrong will be
able to catch it, since the drm core will complain about leftover
framebuffers and kref about underflows.
v2: Kill intel_framebuffer_fini - no longer needed now that we
refcount all fbs properly and only confusing.
v3: We actually still need to call unregister_private to remove the fb
from the idr and drop the idr reference - the final unref doesn't do
that. So much for remembering my own fb liftime rules. Reported by
Imre Deak.
Damien Lespiau [Mon, 10 Feb 2014 17:19:45 +0000 (17:19 +0000)]
drm/i915: Disable display when fused off
FUSE_STRAP has a bit to inform us that the display has been fused off.
Use it to setup the definitive number of pipes at run-time.
v2: actually tweak num_pipes, not num_planes
v3: also tests SFUSE_STRAP bit 7
v4: rebase on top of drm-nightly
use DRM_INFO() for the message telling display is fused off
try to read the FUSE_LOCK bit to determine if PCH display is disabled
v5: Don't read SFUSE_STRAP (register on the PCH) if num_pipes is already 0
from the initial device info struct (to prevent hangs) (Daniel Vetter)
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> (for v3) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (for v3) Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Fri, 7 Feb 2014 20:37:06 +0000 (18:37 -0200)]
drm/i915: Flush GPU rendering with a lockless wait during a pagefault
Arjan van de Ven reported that on his test machine that he was seeing
stalls of greater than 1 frame greatly impacting the user experience. He
tracked this down to being the locked flush during a pagefault as being
the culprit hogging the struct_mutex and so blocking any other user from
proceeding. Stalling on a pagefault is bad behaviour on userspace's
part, for one it means that they are ignoring the coherency rules on
pointer access through the GTT, but fortunately we can apply the same
trick as the set-to-domain ioctl to do a lightweight, nonblocking flush
of outstanding rendering first.
"Prior to the patch it looks like this
(this one testrun does not show the 20ms+ I've seen occasionally)
4.99 ms 2.36 ms 31360 __wait_seqno i915_wait_seqno i915_gem_object_wait_rendering i915_gem_object_set_to_gtt_domain i915_gem_fault __do_fault handle_
+pte_fault handle_mm_fault __do_page_fault do_page_fault page_fault
4.99 ms 2.75 ms 107751 __wait_seqno i915_gem_wait_ioctl drm_ioctl i915_compat_ioctl compat_sys_ioctl ia32_sysret
4.99 ms 1.63 ms 1666 i915_mutex_lock_interruptible i915_gem_fault __do_fault handle_pte_fault handle_mm_fault __do_page_fault do_page_fault page_fa
+ult
4.93 ms 2.45 ms 980 i915_mutex_lock_interruptible intel_crtc_page_flip drm_mode_page_flip_ioctl drm_ioctl i915_compat_ioctl compat_sys_ioctl ia32_
+sysret
4.89 ms 2.20 ms 3283 i915_mutex_lock_interruptible i915_gem_wait_ioctl drm_ioctl i915_compat_ioctl compat_sys_ioctl ia32_sysret
4.34 ms 1.66 ms 1715 i915_mutex_lock_interruptible i915_gem_pwrite_ioctl drm_ioctl i915_compat_ioctl compat_sys_ioctl ia32_sysret
3.73 ms 3.73 ms 49 i915_mutex_lock_interruptible i915_gem_set_domain_ioctl drm_ioctl i915_compat_ioctl compat_sys_ioctl ia32_sysret
3.17 ms 0.33 ms 931 i915_mutex_lock_interruptible i915_gem_madvise_ioctl drm_ioctl i915_compat_ioctl compat_sys_ioctl ia32_sysret
2.97 ms 0.43 ms 1029 i915_mutex_lock_interruptible i915_gem_busy_ioctl drm_ioctl i915_compat_ioctl compat_sys_ioctl ia32_sysret
2.55 ms 0.51 ms 735 i915_gem_get_tiling drm_ioctl i915_compat_ioctl compat_sys_ioctl ia32_sysret
After the patch it looks like this:
4.99 ms 2.14 ms 22212 __wait_seqno i915_gem_wait_ioctl drm_ioctl i915_compat_ioctl compat_sys_ioctl ia32_sysret
4.86 ms 0.99 ms 14170 __wait_seqno i915_gem_object_wait_rendering__nonblocking i915_gem_fault __do_fault handle_pte_fault handle_mm_fault __do_page_
+fault do_page_fault page_fault
3.59 ms 1.31 ms 325 i915_gem_get_tiling drm_ioctl i915_compat_ioctl compat_sys_ioctl ia32_sysret
3.37 ms 3.37 ms 65 i915_mutex_lock_interruptible i915_gem_wait_ioctl drm_ioctl i915_compat_ioctl compat_sys_ioctl ia32_sysret
2.58 ms 2.58 ms 65 i915_mutex_lock_interruptible i915_gem_do_execbuffer.isra.23 i915_gem_execbuffer2 drm_ioctl i915_compat_ioctl compat_sys_ioctl
+ia32_sysret
2.19 ms 2.19 ms 65 i915_mutex_lock_interruptible intel_crtc_page_flip drm_mode_page_flip_ioctl drm_ioctl i915_compat_ioctl compat_sys_ioctl ia32_
+sysret
2.18 ms 2.18 ms 65 i915_mutex_lock_interruptible i915_gem_busy_ioctl drm_ioctl i915_compat_ioctl compat_sys_ioctl ia32_sysret
1.66 ms 1.66 ms 65 i915_gem_set_tiling drm_ioctl i915_compat_ioctl compat_sys_ioctl ia32_sysret
It may not look like it, but this is quite a large difference, and I've
been unable to reproduce > 5 msec delays at all, while before they do
happen (just not in the trace above)."
gem_gtt_hog on an old Pineview (GMA3150),
before: 4969.119ms
after: 4122.749ms
Reported-by: Arjan van de Ven <arjan.van.de.ven@intel.com>
Testcase: igt/gem_gtt_hog Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Imre Deak [Mon, 10 Feb 2014 16:42:49 +0000 (18:42 +0200)]
drm/i915: vlv: handle only enabled pipestat interrupt events
Atm we call the handlers for pending pipestat interrupt events even if
they aren't explicitly enabled by i915_enable_pipestat(). This isn't an
issue for events other than the vblank start event, since those are
always enabled anyways. Otoh, we enable the vblank start event
on-demand, so we'll end up calling the vblank handler at times when they
are disabled.
I haven't checked if this causes any real problem, but for consistency
and to remove some overhead we should still fix this by clearing /
handling only the enabled interrupt events. Also this is a dependency
for the upcoming VLV power domain patchset where we need to disable all
the pipestat interrupts whenever the display power well is off.
v2:
- inline the status->enable mask mapping (Ville)
- don't check for invalid PSR bit on platforms other than VLV (Ville)
Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[danvet: Frob conflict due to different merge order.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Imre Deak [Mon, 10 Feb 2014 16:42:48 +0000 (18:42 +0200)]
drm/i915: vlv: fix mapping of pipestat enable to status bits
At least on VLV we can't get at the pipestat status bits by simply right
shifting the corresponding enable bits. The mapping between enable and
status bits for the sprite0,1 flip done and the PSR events don't follow
this rule, so we need to map them separately.
The PSR enable for pipe A is DPFLIPSTAT[22], but I haven't added support
for this, since there is no user of it atm. Until support is added WARN
if someone tries to enable PSR interrupts, or tries to enable the same
(1 << 6) bit on pipe B, which MBZ.
v2:
- inline the status->enable mask mapping (Ville)
- fix bogus use of status bits in enable mask (Ville)
Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Imre Deak [Mon, 10 Feb 2014 16:42:47 +0000 (18:42 +0200)]
drm/i915: pass status instead of enable flags to i915_enable_pipestat
There isn't any PSR interrupt enable bit for pipe A, so we couldn't
enable it through the current API. Passing the corresponding status bits
solves this and also makes the mapping between enable and status bits
simpler on VLV (addressed in an upcoming patch).
Except of checking for invalid status bit arguments, no functional
change.
v2: split out the low level parts of i915_enable_pipestat accepting
separate enabled and status masks, to make the non-standard mapping
between those masks stand out more (added in the next patch)
(Jesse,Daniel)
Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Fri, 7 Feb 2014 20:37:03 +0000 (18:37 -0200)]
drm/i915: Short-circuit no-op vga_set_state()
Touching the VGA registers risks a hard machine hang, at least on this
ivb machine after removing a conflicting efifb. This is more than likely
related to the discovery that VGA IO decode on the more recent PCH
platforms is terminally broken.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Fri, 7 Feb 2014 20:37:02 +0000 (18:37 -0200)]
drm/i915: Propagate PCI read/write errors during vga_set_state()
This has very little effect other than log the errors in case of failure,
and we then hope for the best.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jesse Barnes [Fri, 7 Feb 2014 20:10:38 +0000 (12:10 -0800)]
drm/i915: alloc intel_fb in the intel_fbdev struct
Allocate this struct instead, so we can re-use another allocated
elsewhere if needed.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
[danvet: WARN_ON if there's no backing storage attached to an fb,
that's a bug.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Mon, 10 Feb 2014 09:03:50 +0000 (09:03 +0000)]
drm/i915: Downgrade *ERROR* message for invalid user input
When we detect that the user passed along an invalid handle or object,
we emit a warning as an aide for debugging. Since these are indeed only
for debugging user triggerable errors (and the errors are reported back
to userspace by the errno), the messages should only be at the debug
level and not claiming that there is a catastrophic error in the
driver/hardware.
References: https://bugs.freedesktop.org/show_bug.cgi?id=74704 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Damien Lespiau [Fri, 7 Feb 2014 19:12:48 +0000 (19:12 +0000)]
drm/i915: Make the intel_device_info structure kept in dev_priv writable
Turns out it'd be nice to change some device information at run-time or simply
have some code to fill in the info struct instead of having to declare the
values in 30+ structures.
What prompted this change is handling fused out display/pipe and tweaking
num_pipes at run-time, but I'm quite sure we'll find other flags/limits to
stick into dev_priv->info.
Most of the changes were done with a sed:
sed -i -e 's/dev_priv->info->/dev_priv->info./g' drivers/gpu/drm/i915/*[ch]
with a few tweaks to make it all work:
- Change the field definition in struct drm_i915_private
- adjust i915_dump_device_info()
- adjust i915_driver_load()
- adjust the INTEL_INFO() macro
v2: cast the info pointer returned by INTEL_INFO() to be const to catch
uses that would modify the structure post-initialization.
(Ville Syrjälä)
v3: Redo the patch onto latest drm-nightly,
Keep the info field const to catch post initialization writes
instead of the v2 solution,
Use a direct structure copy for the initial info initialization to
use the compiler type safety (Ville Syrjälä)
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> (for v2) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (for v2) Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Damien Lespiau [Fri, 7 Feb 2014 19:12:47 +0000 (19:12 +0000)]
drm/i915: Always use INTEL_INFO() to access the device_info structure
If we make sure that all the dev_priv->info usages are wrapped by
INTEL_INFO(), we can easily modify the ->info field to be structure and
not a pointer while keeping the const protection in the INTEL_INFO()
macro.
v2: Rebased onto latest drm-nightly
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Tue, 4 Feb 2014 19:59:18 +0000 (21:59 +0200)]
drm/i915: Disable SF pipelined attribute fetch for SNB
According to Bspec we need to disable SF pipelined attribute fetch
whenever SF outputs exceed 16 and normal clip mode is used. A quick
glance at Mesa suggests that these conditions could happen. So let's
just always set the magic bit.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Kenneth Graunke <kenneth@whitecape.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jeff McGee [Tue, 4 Feb 2014 17:37:01 +0000 (11:37 -0600)]
drm/i915: Update rps interrupt limits
sysfs changes to rps min and max delay were only triggering an update
of the rps interrupt limits if the active delay required an update.
This change ensures that interrupt limits are always updated.
v2: correct compile issue missed on rebase
v3: add igt testcases to signed-off-by section
Testcase: igt/pm_rps/min-max-config-idle
Testcase: igt/pm_rps/min-max-config-loaded Signed-off-by: Jeff McGee <jeff.mcgee@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jeff McGee [Tue, 4 Feb 2014 17:32:31 +0000 (11:32 -0600)]
drm/i915: Restore rps/rc6 on reset
A check of rps/rc6 state after i915_reset determined that the ring
MAX_IDLE registers were returned to their hardware defaults and that
the GEN6_PMIMR register was set to mask all interrupts. This change
restores those values to their pre-reset states by re-initializing
rps/rc6 in i915_reset. A full re-initialization was opted for versus
a targeted set of restore operations for simplicity and maintain-
ability. Note that the re-initialization is not done for Ironlake,
due to a past comment that it causes problems.
Also updated the rps initialization sequence to preserve existing
min/max values in the case of a re-init. We assume the values were
validated upon being set and do not do further range checking. The
debugfs interface for changing min/max was updated with range
checking to ensure this condition (already present in sysfs
interface).
v2: fix rps logging to output hw_max and hw_min, not rps.max_delay
and rps.min_delay which don't strictly represent hardware limits.
Add igt testcase to signed-off-by section.
Testcase: igt/pm_rps/reset Signed-off-by: Jeff McGee <jeff.mcgee@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Mon, 27 Jan 2014 22:43:07 +0000 (22:43 +0000)]
drm/i915: Prevent recursion by retiring requests when the ring is full
As the VM do not track activity of objects and instead use a large
hammer to forcibly idle and evict all of their associated objects when
one is released, it is possible for that to cause a recursion when we
need to wait for free space on a ring and call retire requests.
(intel_ring_begin -> intel_ring_wait_request ->
i915_gem_retire_requests_ring -> i915_gem_context_free ->
i915_gem_evict_vm -> i915_gpu_idle -> intel_ring_begin etc)
In order to remove the requirement for calling retire-requests from
intel_ring_wait_request, we have to inline a couple of steps from
retiring requests, notably we have to record the position of the request
we wait for and use that to update the available ring space.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ben Widawsky [Tue, 4 Feb 2014 12:18:55 +0000 (12:18 +0000)]
drm/i915: Generate a hang error code
We get a large number of bugs which have a, "hey I have that too"
because they see a GPU hang in dmesg. While two machines of the same
model having a GPU hang is indeed a coincidence, it is far from enough
evidence to suggest they are the same.
In order to reduce this effect, and hopefully get people to file new bug
reports, clearly the error message itself has been insufficient (see ref
at the bottom for a new bug report with this characteristic).
The algorithm is purposely pretty naive. I don't think we need much in
order to avoid the problem I am trying to solve, and keeping it naive
gives us some ability to make a decent test case.
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
References: https://bugs.freedesktop.org/show_bug.cgi?id=73276 Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Imre Deak [Tue, 4 Feb 2014 19:35:46 +0000 (21:35 +0200)]
drm/i915: factor out valleyview_pipestat_irq_handler
This will be used by other platforms too, so factor it out.
The only functional change is the reordeing of gmbus_irq_handler() wrt.
the hotplug handling, but since it only schedules a work, it isn't an
issue.
Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
[danvet: Don't keep on using the private_t typedef.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Bspec and the code suggests that the interrupt signaled by IIR[7,5]
(DISPLAY_PIPE_A/B_VBLANK) is a first level IRQ flag for the second
level PIPEA/BSTAT[2] (Start of Vertical Blank) interrupt. Measuring
the relative timings of when IIR[7] and PIPEASTAT[1,2] get set and
checking the effect of unmasking different pipestat and IIR events
shows that this isn't so:
First, ISR/IIR[7] gets set independently of PIPEASTAT[18] (Start of
Vertical Blank Enable) or any other pipestat enable bit, so it isn't
a first level IRQ bit showing the state of PIPEASTAT[2], but is
connected directly to the timing generator.
Second, setting only PIPEASTAT[18] and leaving all other pipestat events
disabled, IIR[6] (DISPLAY_PIPE_A_EVENT) gets set close to the moment when
PIPEASTAT[2] gets set, so the former is a first level interrupt flag for
the latter. The bspec is rather unclear about this, but I also assume
that IIR[6] signals all pipestat A events, except PIPEASTAT[31] (FIFO
Under-run Status).
Third, IIR[7] is set close to the moment when PIPEASTAT[1] (Framestart
Interrupt) gets set, in the mode I used about 12usec after PIPEASTAT[2]
and IIR[6] gets set. This means the IIR[7] isn't marking the start of
vblank, but rather signals the framestart event.
Based on the above, we don't need to unmask IIR[7] when waiting for
start of vblank events, but we can rely on IIR[6] being always unmasked,
which will signal when PIPEASTAT[2] gets set. Doing this will also get
rid of the overhead of getting an interrupt and servicing IIR[7], which
is atm raised always some time after IIR[6]/PIPEASTAT[2] is raised.
Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
RFCv2: Reorganize array indexing so that full offsets can be used as
is. It makes grepping for registers in i915_reg.h much easier. Also
move offset arrays to intel_device_info.
v1: Fixed offsets for VLV, proper eDP handling
v2: Fixed BCLRPAT, PIPESRC, PIPECONF and DSP* macros.
v3: Added EDP pipe comment, removed redundant offset arrays for
MSA_MISC and DDI_FUNC_CTL.
v4: Rename patch and report object size increase.
v5: Change location of commas, add PIPE_EDP into enum pipe
v6: Insert PIPE_EDP_OFFSET into pipe offset array
v7: Set I915_MAX_PIPES back to 3, change more registers accessors
to use the new macros, get rid of _PIPE_INC and add dev_priv
as a parameter where required by the new macros.
Upcoming hardware will not have the various display pipe register
ranges evenly spaced in memory. Change register address calculations
into array lookups.
Tested on SNB, VLV, IVB, Gen2 and HSW w/eDP.
I left the UMS cruft untouched.
Size differences:
text data bss dec hex filename
596431 4634 56 601121 92c21 i915.ko (new)
593199 4634 56 597889 91f81 i915.ko (old)
Signed-off-by: Antti Koskipaa <antti.koskipaa@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Fri, 31 Jan 2014 11:34:58 +0000 (11:34 +0000)]
drm/i915: Treat using a purged buffer as a source of EFAULT
Since a purged buffer is one without any associated pages, attempting to
use it should generate EFAULT rather than EINVAL, as it is not strictly
an invalid parameter.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Fri, 31 Jan 2014 11:34:57 +0000 (11:34 +0000)]
drm/i915: Convert EFAULT into a silent SIGBUS
EFAULT will be a possible return code where backing storage is
transient, such after it is purged by madvise. As such it is to be
expected and so should not trigger a WARN inside i915_gem_fault() but be
converted silently to SIGBUS.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Deepak S [Thu, 30 Jan 2014 17:38:16 +0000 (23:08 +0530)]
drm/i915/vlv: WA to fix Voltage not getting dropped to Vmin when Gfx is power gated.
When we enter RC6 and GFX Clocks are off, the voltage remains higher
than Vmin. When we try to set the freq to RPn, it might fail since the
Gfx clocks are down. So to fix this in Gfx idle, Bring the GFX clock up
and set the freq to RPn then move GFx down.
v3: Fix the timeout during wait for gfx clock (Jesse)
v4: addressed comments on set freq and punit wait (Ville)
v5: use wait_for while waiting for GFX clk to be up. (Daniel)
update cur_delay before requesting min_delay. (Ville)
v6: use wait_for while waiting for punit. (Ville)
Signed-off-by: Deepak S <deepak.s@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Mika Kuoppala [Thu, 30 Jan 2014 17:04:44 +0000 (19:04 +0200)]
drm/i915: Get rid of acthd based guilty batch search
As we seek the guilty batch using request and hangcheck
score, this code is not needed anymore.
v2: Rebase. Passing dev_priv instead of getting it from last_ring
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> (v1) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Mika Kuoppala [Thu, 30 Jan 2014 17:04:43 +0000 (19:04 +0200)]
drm/i915: Use hangcheck score to find guilty context
With full ppgtt using acthd is not enough to find guilty
batch buffer. We get multiple false positives as acthd is
per vm.
Instead of scanning which vm was running on a ring,
to find corressponding context, use a different, simpler,
strategy of finding batches that caused gpu hang:
If hangcheck has declared ring to be hung, find first non complete
request on that ring and claim it was guilty.
v2: Rebase
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73652 Suggested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> (v1) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Wed, 22 Jan 2014 19:32:45 +0000 (21:32 +0200)]
drm/i915: Drop WaDisablePSDDualDispatchEnable:ivb for IVB GT2
Both Bspec and the W/A database state that WaDisablePSDDualDispatchEnable
is only needed for IVB GT1.
The only real confusion here is that the the W/A database also says to
write to the GT2 only register as well, which is strange if the W/A is
only for GT1.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Wed, 22 Jan 2014 19:32:44 +0000 (21:32 +0200)]
drm/i915: Fix IVB GT2 WaDisableDopClockGating and WaDisablePSDDualDispatchEnable
IVB GT2 has two registers for these things, and both must be written.
To add a bit more confusion both Bspec and the W/A database state that
WaDisablePSDDualDispatchEnable is only needed for IVB GT1, but the W/A
database also says to write even the second GT2 only register. So I
don't really know what the right thing here is.
Note that Bspec disagrees with the w/a database here, but Ville
confirmed (by asking Chris) that on gt1 the 2nd reg doesn't exist.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
[danvet: Add note as requested by Rodrigo.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Thu, 30 Jan 2014 14:38:16 +0000 (14:38 +0000)]
drm/i915: Don't access snooped pages through the GTT (even for error capture)
We want to use the GTT for reading back objects upon an error so that we
have exactly the information that the GPU saw. However, it is verboten
to access snoopable pages through the GTT and causes my PineView GPU to
throw a page fault instead.
This has not been a problem in the past as we only dumped ringbuffers
and batchbuffers, both of which must be not snooped. However, the
introduction of HWS page dumping leads to a read of a snooped object
through the GTT. This was introduced by
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[danvet:s/uncached/not snooped/ for one case in the commit message as
requested by Chris.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Thu, 30 Jan 2014 14:38:15 +0000 (14:38 +0000)]
drm/i915: Only print information for filing bug reports once
Repeating the same information multiple times is just annoying.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Mika Kuoppala [Thu, 30 Jan 2014 14:05:48 +0000 (16:05 +0200)]
drm/i915: Tune down debug output when context is banned
If we have stopped rings then we know that test is running
so no need for spam. In addition, only spam when default
context gets banned.
v2: - make sure default context ban gets shown (Chris)
- use helper for checking for default context, everywhere (Chris)
v3: - dont be quiet when debug is set (Ben, Daniel)
Reference: https://bugs.freedesktop.org/show_bug.cgi?id=73652 Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Mika Kuoppala [Thu, 30 Jan 2014 14:01:15 +0000 (16:01 +0200)]
drm/i915: Use i915_hw_context to set reset stats
With full ppgtt support drm_i915_file_private gained knowledge
about the default context. Also reset stats are now inside
i915_hw_context so we can use proper abstraction.
v2: Move BUG_ON and WARN_ON to more proper locations (Ben)
v3: Pass dev directly to i915_context_is_banned to avoid the need to
dereference ctx->last_ring. Spotted by Mika when checking my
s/BUG/WARN/ change, I've missed this ->last_ring dereference.
Suggested-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com> (v2) Reviewed-by: Ben Widawsky <ben@bwidawsk.net> (v2)
[danvet: s/BUG/WARN/] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ben Widawsky [Thu, 30 Jan 2014 08:19:40 +0000 (00:19 -0800)]
drm/i915: Capture PPGTT info on error capture
v2: Rebased upon cleaned up error state
v3: Make sure hangcheck info remains last (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ben Widawsky [Thu, 30 Jan 2014 08:19:39 +0000 (00:19 -0800)]
drm/i915: Add some more registers to error state
Chris:
Do we also want to capture?
GAC_ECO_BITS /* gen6,7 */
GAM_ECOCHK /* gen6,7 */
GAB_CTL /* gen6 */
GFX_MODE /* gen6 */
Requested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ben Widawsky [Thu, 30 Jan 2014 08:19:38 +0000 (00:19 -0800)]
drm/i915: Move per ring error state to ring_error
v2: Moved num_requests up (Chris)
Rebased on new hws page capture which required a rename since it made
two members named, 'hws' in the per ring error state. (Ben)
Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ben Widawsky [Thu, 30 Jan 2014 08:19:37 +0000 (00:19 -0800)]
drm/i915: Reorder struct members
This helps make an upcoming patch a bit more reviewable
Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Create logical sections in an attempt to clean up, and continue to keep
future additions clean.
v2: Reworded the comments. Added section headers (Chris)
Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ben Widawsky [Thu, 30 Jan 2014 08:19:35 +0000 (00:19 -0800)]
drm/i915: Extract register state error capture
The code has become quite hairy. By relocating all the generic registers
it will become more obvious where future ones should go. There is still
admittedly a bit of confusion left for things like per ring registers.
A subsequent patch will clean this function up.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Dave Airlie [Thu, 30 Jan 2014 00:46:06 +0000 (10:46 +1000)]
Merge branch 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-next
more fixes for nouveau.
* 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6:
drm/nouveau: resume display if any later suspend bits fail
drm/nouveau: fix lock unbalance in nouveau_crtc_page_flip
drm/nouveau: implement hooks for needed for drm vblank timestamping support
drm/nouveau/disp: add a method to fetch info needed by drm vblank timestamping
drm/nv50: fill in crtc mode struct members from crtc_mode_fixup
projects / karo-tx-linux.git / log