]> git.karo-electronics.de Git - linux-beck.git/log
linux-beck.git
12 years agobcma: detect and register serial flash device
Rafał Miłecki [Fri, 10 Aug 2012 19:23:53 +0000 (21:23 +0200)]
bcma: detect and register serial flash device

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoMerge branch 'for-john' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac802...
John W. Linville [Tue, 21 Aug 2012 20:00:21 +0000 (16:00 -0400)]
Merge branch 'for-john' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next

Conflicts:
drivers/net/wireless/mac80211_hwsim.c

12 years agomac80211: clean up ieee80211_subif_start_xmit
Johannes Berg [Mon, 30 Jul 2012 13:11:56 +0000 (15:11 +0200)]
mac80211: clean up ieee80211_subif_start_xmit

There's no need to carry around a return value
that is always NETDEV_TX_OK anyway.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agomac80211: pass channel to ieee80211_send_probe_req
Johannes Berg [Mon, 30 Jul 2012 10:26:34 +0000 (12:26 +0200)]
mac80211: pass channel to ieee80211_send_probe_req

In multi-channel scenarios, the channel that we will
transmit a probe request on isn't always the current
channel (which will be NULL anyway) but will instead
be the channel that the AP is on. Pass the channel
to the ieee80211_send_probe_req() function so it can
be used in the different scenarios. The scan code
continues to pass the current channel, of course.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agomac80211: convert ops checks to WARN_ON
Johannes Berg [Thu, 26 Jul 2012 12:42:10 +0000 (14:42 +0200)]
mac80211: convert ops checks to WARN_ON

There's no need to BUG_ON when a driver registers
invalid operations, warn and return an error.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agomac80211: check operating channel in scan
Johannes Berg [Thu, 26 Jul 2012 12:38:32 +0000 (14:38 +0200)]
mac80211: check operating channel in scan

The optimisation of scanning only on the current
channel should check the operating channel. Also
modify it to compare channel pointer rather than
the frequency.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agomac80211: use RX status band instead of current band
Johannes Berg [Thu, 26 Jul 2012 12:31:19 +0000 (14:31 +0200)]
mac80211: use RX status band instead of current band

Even for single-channel devices it is possible that we
switch the channel temporarily (e.g. for scanning) but
while doing so process a received frame that was still
received on the old channel, so checking the current
band is racy. Use the band from status instead.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agomac80211: don't assume channel is set in tracing
Johannes Berg [Thu, 26 Jul 2012 12:27:39 +0000 (14:27 +0200)]
mac80211: don't assume channel is set in tracing

With the move to multi-channel and away from
drv_config(), hw.conf.channel will not always
be set, only for devices using the current API
instead of the new channel context APIs. Check
the channel is set before adding its frequency
to the trace data.

Also break some overly long lines in the code.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agomac80211: use oper_channel in rate init
Johannes Berg [Mon, 23 Jul 2012 12:29:21 +0000 (14:29 +0200)]
mac80211: use oper_channel in rate init

Using hw.conf.channel is wrong as it could be the
temporary channel if the station is added from the
workqueue while the device is already on another
channel. Use oper_channel instead.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agomac80211: remove freq/chantype from debugfs
Johannes Berg [Thu, 26 Jul 2012 12:22:06 +0000 (14:22 +0200)]
mac80211: remove freq/chantype from debugfs

You can now get these values through iw, and
they conflict with multi-channel work.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agomac80211: remove almost unused local variable
Johannes Berg [Thu, 26 Jul 2012 12:07:46 +0000 (14:07 +0200)]
mac80211: remove almost unused local variable

In ieee80211_beacon_get_tim() we can use the
txrc.sband instead of a separate local variable.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agomac80211: mesh: don't use global channel type
Johannes Berg [Wed, 25 Jul 2012 11:51:49 +0000 (13:51 +0200)]
mac80211: mesh: don't use global channel type

Using local->_oper_channel_type in the mesh code is
completely wrong as this value is the combination
of the various interface channel types and can be
a different value from the mesh interface in case
there are multiple virtual interfaces.

Use sdata->vif.bss_conf.channel_type instead as it
tracks the per-vif channel type.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agomac80211: simplify buffers in aes_128_cmac_vector
Johannes Berg [Sun, 19 Aug 2012 12:51:44 +0000 (14:51 +0200)]
mac80211: simplify buffers in aes_128_cmac_vector

There's no need to use a single scratch buffer and
calculate offsets into it, just use two separate
buffers for the separate variables.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agomac80211_hwsim: add support for P2P Device
Johannes Berg [Tue, 19 Jun 2012 15:29:29 +0000 (17:29 +0200)]
mac80211_hwsim: add support for P2P Device

Advertise support for P2P Device in hwsim
to be able to test it.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agomac80211: add IEEE80211_HW_P2P_DEV_ADDR_FOR_INTF
Johannes Berg [Tue, 19 Jun 2012 15:19:44 +0000 (17:19 +0200)]
mac80211: add IEEE80211_HW_P2P_DEV_ADDR_FOR_INTF

Some devices like the current iwlwifi implementation
require that the P2P interface address match the P2P
Device address (only one P2P interface is supported.)
Add the HW flag IEEE80211_HW_P2P_DEV_ADDR_FOR_INTF
that allows drivers to request that P2P Interfaces
added while a P2P Device is active get the same MAC
address by default.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agomac80211: support P2P Device abstraction
Johannes Berg [Mon, 18 Jun 2012 18:07:15 +0000 (20:07 +0200)]
mac80211: support P2P Device abstraction

After cfg80211 got a P2P Device abstraction, add
support to mac80211. Whether it really is supported
or not will depend on whether or not the driver has
support for it, but mac80211 needs to change to be
able to support drivers that need a P2P Device.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agocfg80211: add P2P Device abstraction
Johannes Berg [Fri, 15 Jun 2012 22:19:54 +0000 (00:19 +0200)]
cfg80211: add P2P Device abstraction

In order to support using a different MAC address
for the P2P Device address we must first have a
P2P Device abstraction that can be assigned a MAC
address.

This abstraction will also be useful to support
offloading P2P operations to the device, e.g.
periodic listen for discoverability.

Currently, the driver is responsible for assigning
a MAC address to the P2P Device, but this could be
changed by allowing a MAC address to be given to
the NEW_INTERFACE command.

As it has no associated netdev, a P2P Device can
only be identified by its wdev identifier but the
previous patches allowed using the wdev identifier
in various APIs, e.g. remain-on-channel.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agomac80211: make ieee80211_beacon_connection_loss_work static
Johannes Berg [Wed, 1 Aug 2012 14:49:34 +0000 (16:49 +0200)]
mac80211: make ieee80211_beacon_connection_loss_work static

There's no need to declare the function in the
header file since it's only used in a single
place, so make it static.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agomac80211: check size of channel switch IE when parsing
Johannes Berg [Wed, 1 Aug 2012 14:13:02 +0000 (16:13 +0200)]
mac80211: check size of channel switch IE when parsing

The channel switch IE has a fixed size, so we can
discard it in parsing if it's not the right size
and use the right struct pointer.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agomac80211: fix CSA handling timer
Johannes Berg [Wed, 1 Aug 2012 13:53:45 +0000 (15:53 +0200)]
mac80211: fix CSA handling timer

The time until the channel switch is in TU,
not in milliseconds, so use TU_TO_EXP_TIME()
to correctly program the timer.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agomac80211: clean up CSA handling code
Johannes Berg [Wed, 1 Aug 2012 13:50:46 +0000 (15:50 +0200)]
mac80211: clean up CSA handling code

Clean up the CSA handling code by moving some
of it out of the if and using a C99 initializer
for the struct passed to the driver method.

While at it, also add a comment that we should
wait for a beacon after switching the channel.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agomac80211: remove unneeded 'bssid' variable
Johannes Berg [Wed, 1 Aug 2012 13:48:38 +0000 (15:48 +0200)]
mac80211: remove unneeded 'bssid' variable

There's no need to copy the BSSID just to print
it, remove the unnecessary variable.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agomac80211: support A-MPDU status reporting
Johannes Berg [Thu, 5 Jul 2012 09:34:31 +0000 (11:34 +0200)]
mac80211: support A-MPDU status reporting

Support getting A-MPDU status information from the
drivers and reporting it to userspace via radiotap
in the standard fields.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agowireless: add radiotap A-MPDU status field
Johannes Berg [Thu, 5 Jul 2012 09:32:16 +0000 (11:32 +0200)]
wireless: add radiotap A-MPDU status field

Define the A-MPDU status field in radiotap, also
update the radiotap parser for it and the MCS field
that was apparently missed last time.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agomac80211: add supported rates change notification in IBSS
Antonio Quartulli [Sun, 12 Aug 2012 16:24:55 +0000 (18:24 +0200)]
mac80211: add supported rates change notification in IBSS

In IBSS it is possible that the supported rates set for a station changes over
time (e.g. it gets first initialised as an empty set because of no available
information about rates and updated later). In this case the driver has to be
notified about the change in order to update its internal table accordingly (if
needed).

This behaviour is needed by all those drivers that handle rc internally but
leave stations management to mac80211

Reported-by: Gui Iribarren <gui@altermundi.net>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
[Johannes - add docs, validate IBSS mode only, fix compilation]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agomac80211: clean up mpath_move_to_queue()
Thomas Pedersen [Fri, 10 Aug 2012 01:15:40 +0000 (18:15 -0700)]
mac80211: clean up mpath_move_to_queue()

Use skb_queue_walk_safe instead, and fix a few issues:

- didn't free old skbs on moving
- didn't react to failed skb alloc
- needlessly held a local pointer to the destination frame queue
- didn't check destination queue length before adding skb

Signed-off-by: Thomas Pedersen <thomas@cozybit.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agomac80211: use skb_queue_walk() in mesh_path_assign_nexthop
Thomas Pedersen [Fri, 10 Aug 2012 01:15:39 +0000 (18:15 -0700)]
mac80211: use skb_queue_walk() in mesh_path_assign_nexthop

Since all we really want is just to iterate over all skbs, do just that
and avoid (de)queueing to a clusmy tmpq.

Signed-off-by: Thomas Pedersen <thomas@cozybit.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agomac80211: avoid using synchronize_rcu in ieee80211_set_probe_resp
Eyal Shapira [Mon, 6 Aug 2012 11:26:16 +0000 (14:26 +0300)]
mac80211: avoid using synchronize_rcu in ieee80211_set_probe_resp

This could take a while (100ms+) and may delay sending assoc resp
in AP mode with WPS or P2P GO (as setting the probe resp takes place
there). We've encountered situations where the delay was big enough
to cause connection problems with devices like Galaxy Nexus.
Switch to using call_rcu with a free handler.

[Arik - rework to use plain buffer and instead of skb]

Signed-off-by: Eyal Shapira <eyal@wizery.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agop54: fix powerpc gcc warnings
Christian Lamparter [Sat, 11 Aug 2012 11:09:20 +0000 (13:09 +0200)]
p54: fix powerpc gcc warnings

My commit "p54: parse output power table" introduced
the following compiler warnings for powerpc-allmodconfig

eeprom.c: In function 'p54_get_maxpower':
eeprom.c:291 warning: comparison of distinct pointer types lacks a cast
eeporm.c:292 warning: comparison of distinct pointer types lacks a cast
eeprom.c:293 warning: comparison of distinct pointer types lacks a cast
eeprom.c:294 warning: comparison of distinct pointer types lacks a cast

This patch fixes those by using max_t(u16
which forces a type cast.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Tested-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agomac80211: fix unnecessary beacon update after peering status change
Marco Porsch [Wed, 8 Aug 2012 05:58:43 +0000 (07:58 +0200)]
mac80211: fix unnecessary beacon update after peering status change

ieee80211_bss_info_change_notify is called everytime a peer link is established
or closed, because the accepting_plinks flag in the meshconf IE *might* have changed.

With this patch the corresponding functions return the BSS_CHANGED_BEACON flag when a beacon update is necessary.

Also it makes mesh_accept_plinks_update the common place to update the accepting_plinks flag.
mesh_accept_plinks_update is called upon plink change and also periodically from ieee80211_mesh_housekeeping.
Thus, it also picks up changes of local->num_sta.

Signed-off-by: Marco Porsch <marco.porsch@etit.tu-chemnitz.de>
Acked-by: Thomas Pedersen <thomas@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agobrcmsmac: document firmware dependencies
Jeff Mahoney [Mon, 6 Aug 2012 19:17:26 +0000 (15:17 -0400)]
brcmsmac: document firmware dependencies

The brcmsmac driver requests firmware but doesn't document the
dependency. This means that software that analyzes the modules to
determine if firmware is needed won't detect it.

Specifically, (at least) openSUSE won't install the kernel-firmware
package if no hardware requires it.

This patch adds the MODULE_FIRMWARE directives.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Acked-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoath9k: tune rc_stats to display only valid rates
Rajkumar Manoharan [Fri, 10 Aug 2012 11:17:30 +0000 (16:47 +0530)]
ath9k: tune rc_stats to display only valid rates

This could make rc_stats more simpler and ease the debugging.

Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoath9k: Trim rate table
Sujith Manoharan [Fri, 10 Aug 2012 11:17:23 +0000 (16:47 +0530)]
ath9k: Trim rate table

Remove ctrl_rate, cw40index, sgi_index, ht_index and calculate
the rate index for TX status from the valid_rate_index that
is populated at initialization time.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoath9k: Remove MIMO-PS specific code
Sujith Manoharan [Fri, 10 Aug 2012 11:17:16 +0000 (16:47 +0530)]
ath9k: Remove MIMO-PS specific code

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoath9k: Cleanup TX status API
Sujith Manoharan [Fri, 10 Aug 2012 11:17:09 +0000 (16:47 +0530)]
ath9k: Cleanup TX status API

Calculate the final rate index inside ath_rc_tx_status().

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoath9k: Bail out properly before calculating rate index
Sujith Manoharan [Fri, 10 Aug 2012 11:17:03 +0000 (16:47 +0530)]
ath9k: Bail out properly before calculating rate index

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoath9k: Fix RTS/CTS rate selection
Sujith Manoharan [Fri, 10 Aug 2012 11:16:57 +0000 (16:46 +0530)]
ath9k: Fix RTS/CTS rate selection

The current method of assigning the RTS/CTS rate is completely
broken for HT mode and breaks P2P operation. Fix this by using
the basic_rates provided to the driver by mac80211. For now,
choose the lowest supported basic rate for HT frames.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoath9k: Do not set IEEE80211_TX_RC_USE_SHORT_PREAMBLE
Sujith Manoharan [Fri, 10 Aug 2012 11:16:50 +0000 (16:46 +0530)]
ath9k: Do not set IEEE80211_TX_RC_USE_SHORT_PREAMBLE

mac80211 does it for us.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoath9k: Unify valid rate calculation routines
Sujith Manoharan [Fri, 10 Aug 2012 11:16:44 +0000 (16:46 +0530)]
ath9k: Unify valid rate calculation routines

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoath9k: Remove ath_rc_set_valid_rate_idx
Sujith Manoharan [Fri, 10 Aug 2012 11:16:37 +0000 (16:46 +0530)]
ath9k: Remove ath_rc_set_valid_rate_idx

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoath9k: Change rateset calculation
Sujith Manoharan [Fri, 10 Aug 2012 11:16:31 +0000 (16:46 +0530)]
ath9k: Change rateset calculation

Commit "ath9k: Change rate control to use legacy rate as last MRR"
resulted in the mixing of HT/legacy rates in a single rateset,
which is undesirable. Revert this behavior.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoath9k: Cleanup index retrieval routines
Sujith Manoharan [Fri, 10 Aug 2012 11:16:24 +0000 (16:46 +0530)]
ath9k: Cleanup index retrieval routines

Trim API and remove unused variables.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoath9k: Cleanup ath_rc_setvalid_htrates
Sujith Manoharan [Fri, 10 Aug 2012 11:16:18 +0000 (16:46 +0530)]
ath9k: Cleanup ath_rc_setvalid_htrates

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoath9k: Cleanup ath_rc_setvalid_rates
Sujith Manoharan [Fri, 10 Aug 2012 11:16:11 +0000 (16:46 +0530)]
ath9k: Cleanup ath_rc_setvalid_rates

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoath9k: Cleanup RC init API
Sujith Manoharan [Fri, 10 Aug 2012 11:16:04 +0000 (16:46 +0530)]
ath9k: Cleanup RC init API

A reference to the rate table is stored inside the
private structure, so there is no need to pass "rate_table"
around.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoath9k: Simplify rate table initialization
Sujith Manoharan [Fri, 10 Aug 2012 11:15:52 +0000 (16:45 +0530)]
ath9k: Simplify rate table initialization

Remove various local variables that duplicate information
already stored in mac80211.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agomwifiex: use GFP_ATOMIC under spin lock
Dan Carpenter [Thu, 9 Aug 2012 06:57:57 +0000 (09:57 +0300)]
mwifiex: use GFP_ATOMIC under spin lock

We're holding the sta_list_spinlock here so we can't sleep.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agomwifiex: notify cfg80211 about MIC failures
Amitkumar Karwar [Thu, 9 Aug 2012 02:02:56 +0000 (19:02 -0700)]
mwifiex: notify cfg80211 about MIC failures

Call cfg80211_michael_mic_failure() handler when there is a MIC error
event from firmware.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Kiran Divekar <dkiran@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agomwifiex: fix 'smatch' warning in preparing key_material cmd
Bing Zhao [Thu, 9 Aug 2012 02:01:52 +0000 (19:01 -0700)]
mwifiex: fix 'smatch' warning in preparing key_material cmd

The key length can be 32 bytes for TKIP and 16 bytes for AES_CMAC.
'smatch' warns on memcpy using key_len variable to copy data to
a 16 bytes buffer. Use fixed length to avoid the warning.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agossb: check for flash presentence
Rafał Miłecki [Wed, 8 Aug 2012 17:37:04 +0000 (19:37 +0200)]
ssb: check for flash presentence

We can not assume parallel flash is always present, there are boards
with *serial* flash and probably some without flash at all.
Define some bits by the way.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Reviewed-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agob43legacy: fix logic in GPIO init
Rafał Miłecki [Wed, 8 Aug 2012 17:10:16 +0000 (19:10 +0200)]
b43legacy: fix logic in GPIO init

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agob43: N-PHY: fix 0x2057 radio calib copy/paste mistake
Rafał Miłecki [Wed, 8 Aug 2012 17:10:15 +0000 (19:10 +0200)]
b43: N-PHY: fix 0x2057 radio calib copy/paste mistake

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agobcma: add (mostly) NAND defines
Rafał Miłecki [Wed, 8 Aug 2012 17:10:14 +0000 (19:10 +0200)]
bcma: add (mostly) NAND defines

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agomwifiex: fix powerpc64-linux- compilation warnings
Bing Zhao [Tue, 7 Aug 2012 23:08:08 +0000 (16:08 -0700)]
mwifiex: fix powerpc64-linux- compilation warnings

These warnings can be detected by using powerpc64-linux toolchain
(gcc-4.6.3-nolibc).

  CC [M]  drivers/net/wireless/mwifiex/sta_event.o
drivers/net/wireless/mwifiex/sta_event.c: In function 'mwifiex_process_sta_event':
drivers/net/wireless/mwifiex/sta_event.c:388:4: warning: comparison of distinct pointer types lacks a cast [enabled by default]
  CC [M]  drivers/net/wireless/mwifiex/uap_event.o
drivers/net/wireless/mwifiex/uap_event.c: In function 'mwifiex_process_uap_event':
drivers/net/wireless/mwifiex/uap_event.c:258:11: warning: comparison of distinct pointer types lacks a cast [enabled by default]

Use min_t() instead of min() to fix the warnings.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoiwlegacy: clean up suspend/resume
Johannes Berg [Tue, 7 Aug 2012 19:46:44 +0000 (21:46 +0200)]
iwlegacy: clean up suspend/resume

There's no need to export the il_pci_suspend
and il_pci_resume functions since they're only
referenced from il_pm_ops. The latter can also
be defined using SIMPLE_DEV_PM_OPS instead of
open-coding it.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agomwifiex: fix code mis-alignment after the if statement
Fengguang Wu [Tue, 7 Aug 2012 02:26:53 +0000 (10:26 +0800)]
mwifiex: fix code mis-alignment after the if statement

Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Acked-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoath5k: Put power_level where it belongs and rename it
Nick Kossifidis [Sun, 5 Aug 2012 19:35:36 +0000 (22:35 +0300)]
ath5k: Put power_level where it belongs and rename it

Put power_level to ah_txpower struct with the rest tx power infos and
also rename it to txp_requested to make more sense.

v2 make sure we don't memset it to zero on reset

Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoath5k: Preserve tx power level requested from above on phy_init
Nick Kossifidis [Sun, 5 Aug 2012 19:35:35 +0000 (22:35 +0300)]
ath5k: Preserve tx power level requested from above on phy_init

By using cur_pwr on phy_init we re-use the power level previously set by the
driver, not the one we got from above.

Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoath5k: Fix range scaling when setting rate power table
Nick Kossifidis [Sun, 5 Aug 2012 19:35:34 +0000 (22:35 +0300)]
ath5k: Fix range scaling when setting rate power table

rates[i] is unsigned but txp_offset can be negative for newer parts
with PDADC table. We cover the case when rates[i] + txp_offset > 63
but we must also cover the case when its < 0 or else rates[i] will overflow.

Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoath5k: Use correct value for min_pwr and cur_pwr
Nick Kossifidis [Sun, 5 Aug 2012 19:35:33 +0000 (22:35 +0300)]
ath5k: Use correct value for min_pwr and cur_pwr

Make sure we don't store the table offsets for min and cur power levels,
store the 0.25dB values instead. This way we don't clamp the tx power level
to max (because now cur_pwr holds the 0.25dB value, not the table offset) after
re-using cur_pwr on reset.

Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agobcma: make some functions static
Hauke Mehrtens [Sun, 5 Aug 2012 14:54:41 +0000 (16:54 +0200)]
bcma: make some functions static

The functions and structs are not used in an other file and the
prototypes are in no header file, just make them static so the compiler
is able to optimize them better.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agop54: parse output power table
Christian Lamparter [Sat, 28 Jul 2012 00:57:51 +0000 (02:57 +0200)]
p54: parse output power table

For the upcoming tpc changes, the driver needs
to provide sensible max output values for each
supported channel.

And while the eeprom always had a output_limit
table, which defines the upper limit for each
frequency and modulation, it was never really
useful for anything... until now.

Note: For anyone wondering about what your card
is calibrated for: check "iw list".
* 2412 MHz [1] (18.0 dBm)
* 2437 MHz [6] (19.0 dBm)
[...]
* 5180 MHz [36] (18.0 dBm)
* 5260 MHz [52] (17.0 dBm) (radar detection)
* 5680 MHz [136] (19.0 dBm) (radar detection)
(for a Dell Wireless 1450 USB Adapter)

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth...
John W. Linville [Fri, 10 Aug 2012 19:13:12 +0000 (15:13 -0400)]
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next

12 years agomwifiex: add AES_CMAC support in key_material cmd
Ying Luo [Sat, 4 Aug 2012 01:06:14 +0000 (18:06 -0700)]
mwifiex: add AES_CMAC support in key_material cmd

The sequence counter will be sent to firmware via key_material
command.

Signed-off-by: Ying Luo <luoy@marvell.com>
Signed-off-by: Stone Piao <piaoyun@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agomwifiex: pass key_params pointer in mwifiex_set_encode
Ying Luo [Sat, 4 Aug 2012 01:06:13 +0000 (18:06 -0700)]
mwifiex: pass key_params pointer in mwifiex_set_encode

'cipher' and 'seq' coming from cfg80211 add_key handler will be
parsed in mwifiex_set_encode() to handle AES_CMAC cipher suite.

Signed-off-by: Ying Luo <luoy@marvell.com>
Signed-off-by: Stone Piao <piaoyun@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agomwifiex: rename wapi_rxpn to pn
Ying Luo [Sat, 4 Aug 2012 01:06:12 +0000 (18:06 -0700)]
mwifiex: rename wapi_rxpn to pn

This array was used for wapi_rxpn only. Now it will be used for
AES_CMAC as well. So make a generic name for it.

Signed-off-by: Ying Luo <luoy@marvell.com>
Signed-off-by: Stone Piao <piaoyun@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agomwifiex: cleanup TX/RX BA tables for uAP
Avinash Patil [Sat, 4 Aug 2012 01:06:11 +0000 (18:06 -0700)]
mwifiex: cleanup TX/RX BA tables for uAP

Cleanup TX/RX BA tables when AP receives deauthentication from
associated station. During BSS_IDLE event, all wmm queues, BA
streams created for AP interface are deleted.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Kiran Divekar <dkiran@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agomwifiex: add 11n Block Ack support for uAP
Avinash Patil [Sat, 4 Aug 2012 01:06:10 +0000 (18:06 -0700)]
mwifiex: add 11n Block Ack support for uAP

This patch adds support for handling BA request and BA setup
events for AP interface.

RA list is marked as either 11n enabled or disabled from station's
capabilities in association request. BA setup is initiated only
after some specific number of packets for particular RA list are
transmitted.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Kiran Divekar <dkiran@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agomwifiex: support RX AMSDU aggregation for uAP
Avinash Patil [Sat, 4 Aug 2012 01:06:09 +0000 (18:06 -0700)]
mwifiex: support RX AMSDU aggregation for uAP

This patch adds support for reception and decoding of AMSDU
aggregation frames for AP interface.
Patch also adds support for handling AMSDU aggregation event.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Kiran Divekar <dkiran@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agomwifiex: improve uAP RX handling
Avinash Patil [Sat, 4 Aug 2012 01:06:08 +0000 (18:06 -0700)]
mwifiex: improve uAP RX handling

1. Separate file for uAP RX handling.
2. If received packet is broadcast/multicast, send it to kernel
   as well as requeue it back to uAP TX queue.
3. If received packet is for associated STA (intra-BSS), requeue
   it back to uAP TX queue.
4. In all other cases (packets for AP or inter-BSS packets),
   pass packet to kernel to handle it accordingly.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Kiran Divekar <dkiran@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agomwifiex: create list for associated stations in AP mode
Avinash Patil [Sat, 4 Aug 2012 01:06:07 +0000 (18:06 -0700)]
mwifiex: create list for associated stations in AP mode

After station is associated an entry would be added to station
list. This entry would have station specific information such as
11n support, AMSDU size. The entry would be deleted after
deauthentication. All station entries would be deleted during
BSS_IDLE event.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Kiran Divekar <dkiran@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agomwifiex: separate file for handling AP events
Avinash Patil [Sat, 4 Aug 2012 01:06:06 +0000 (18:06 -0700)]
mwifiex: separate file for handling AP events

Route AP events handling to separate function defined in
uap_event.c.
AP specific event handling is removed from sta_event.c.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Kiran Divekar <dkiran@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agomwifiex: update 11n status as per start_ap IE
Avinash Patil [Sat, 4 Aug 2012 01:06:05 +0000 (18:06 -0700)]
mwifiex: update 11n status as per start_ap IE

If HT IE is present in beacon_data of start_ap cfg80211 handler,
enable 11n flag in AP. Disable 11n flag when stop_ap handler is
called.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Kiran Divekar <dkiran@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agomwifiex: improve scan delay logic during Tx traffic
Amitkumar Karwar [Sat, 4 Aug 2012 01:06:04 +0000 (18:06 -0700)]
mwifiex: improve scan delay logic during Tx traffic

Earlier scan command was postponed by 20msec multiple times to give
preference to Tx traffic until we find empty wmm queue.

There is a corner case in which wmm queue becomes empty immediately
after processing the packet(before 20msec) and there may be next
packet coming after some time. In this case we should not resume scan
operation.

We will use new flag to check Tx traffic and resume scan operation
only if there is no traffic for 200msec.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agomwifiex: update max_chan_per_scan correctly for SSID scan
Amitkumar Karwar [Sat, 4 Aug 2012 01:06:03 +0000 (18:06 -0700)]
mwifiex: update max_chan_per_scan correctly for SSID scan

As per recent patch "658f37b mwifiex: scan less channels..."
less channels are scanned per scan command in associated state.

Default number of channels per scan command for normal scan are
already 4, but those are 14 for SSID specific scan operation.

This code change in this patch is required for SSID specific scan.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agomwifiex: do le_to_cpu conversion for Rx packet header elements
Amitkumar Karwar [Sat, 4 Aug 2012 01:06:02 +0000 (18:06 -0700)]
mwifiex: do le_to_cpu conversion for Rx packet header elements

We do similar conversion for Tx packet header but it was missing
for Rx packet header. Without this fix, Rx packet header won't
be correctly parsed on big endian platform.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Kiran Divekar <dkiran@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agomwifiex: correction in MSDU padding logic
Yogesh Ashok Powar [Sat, 4 Aug 2012 01:06:01 +0000 (18:06 -0700)]
mwifiex: correction in MSDU padding logic

Padding arithmetic will always work for MSDUs provided first MSDU
ends on 4-byte boundary. Fixing it by making sure that all MSDU ends
on 4-byte boundary.

Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Kiran Divekar <dkiran@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agomwifiex: remove extra padding to AMSDU
Yogesh Ashok Powar [Sat, 4 Aug 2012 01:06:00 +0000 (18:06 -0700)]
mwifiex: remove extra padding to AMSDU

Since commit: fb3c19bc9687d972b83faf366b38ac807eca8f25, adding
extra padding to AMSDU is redundant since same is being performed at
mwifiex_11n_aggregate_pkt after forming the AMSDU packet. Fixing it
by removing it.

Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Kiran Divekar <dkiran@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agomwifiex: copy MSDU subframes correctly
Yogesh Ashok Powar [Sat, 4 Aug 2012 01:05:59 +0000 (18:05 -0700)]
mwifiex: copy MSDU subframes correctly

All MSDU subframes, except the first one in AMSDU, were being written
wrongly at the location of first MSDU frame. Fixing that by copying
the MSDU at skb->tail of AMSDU.

Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Kiran Divekar <dkiran@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoath9k: fix indentation in ar9003_hw_set_power_per_rate_table
Gabor Juhos [Thu, 2 Aug 2012 14:00:52 +0000 (16:00 +0200)]
ath9k: fix indentation in ar9003_hw_set_power_per_rate_table

The current indentation is off by one tab.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoath9k: optimize power level initialization for CTL_[25]GHT20
Gabor Juhos [Thu, 2 Aug 2012 14:00:51 +0000 (16:00 +0200)]
ath9k: optimize power level initialization for CTL_[25]GHT20

The first part of the power array is initialized in a loop
and the last two values are initialized separately. Extend
the loop to cover the last two items, and remove the separate
initialization.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agocarl9170: Add support for NL80211_IFTYPE_MESH_POINT interfaces
Javier Lopez [Fri, 27 Jul 2012 18:27:25 +0000 (11:27 -0700)]
carl9170: Add support for NL80211_IFTYPE_MESH_POINT interfaces

This patch contains following modifications:

- Add mesh capabilities on fw.c to permit creation of mesh
  interfaces using this driver.

- Modify carl9170_set_operating_mode, to use AP-style beaconing
  with mesh interfaces.

- Allow beacon updates for NL80211_IFTYPE_MESH_POINT type in
  carl9170_handle_command_response.

- Add NL80211_IFTYPE_MESH_POINT case on carl9170_op_add_interfaces to
  support mesh/ap/sta virtual interface combinations.

Signed-off-by: Javier Lopez <jlopex@cozybit.com>
Acked-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agob43: N-PHY: add overriding RF control for rev7+
Rafał Miłecki [Thu, 26 Jul 2012 08:25:09 +0000 (10:25 +0200)]
b43: N-PHY: add overriding RF control for rev7+

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agob43: be more user friendly with PHY info
Rafał Miłecki [Thu, 26 Jul 2012 06:16:01 +0000 (08:16 +0200)]
b43: be more user friendly with PHY info

First of all, use PHY names instead of magic numbers. It should make
configuring kernel easier in case of not enabled PHY type support.
Secondly, always print info about PHY. This is really basic info about
hardware and quite important for the support level.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agob43: N-PHY: init 0x2057 radio
Rafał Miłecki [Wed, 25 Jul 2012 22:07:39 +0000 (00:07 +0200)]
b43: N-PHY: init 0x2057 radio

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agob43: N-PHY: finish 0x2056 radio setup
Rafał Miłecki [Wed, 25 Jul 2012 22:07:38 +0000 (00:07 +0200)]
b43: N-PHY: finish 0x2056 radio setup

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agob43: add helper waiting for given value in radio reg
Rafał Miłecki [Wed, 25 Jul 2012 22:07:37 +0000 (00:07 +0200)]
b43: add helper waiting for given value in radio reg

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agob43: rename host flags defines
Rafał Miłecki [Wed, 25 Jul 2012 14:58:38 +0000 (16:58 +0200)]
b43: rename host flags defines

There are more than 3 registers on new hardware. Host flags handling has
to be rewritten, as we can't use u128 type to handle all 5 regs.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agop54pci: convert driver to use asynchronous firmware loading
Larry Finger [Tue, 24 Jul 2012 19:16:42 +0000 (21:16 +0200)]
p54pci: convert driver to use asynchronous firmware loading

Drivers that load firmware from their probe routine have problems with the
latest versions of udev as they get timeouts while waiting for user
space to start. The problem is fixed by using request_firmware_nowait()
and delaying the start of mac80211 until the firmware is loaded.

To prevent the possibility of the driver being unloaded while the firmware
loading callback is still active, a completion queue entry is used.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agob43: N-PHY: add PHY rev7+ workarounds
Rafał Miłecki [Tue, 24 Jul 2012 17:18:20 +0000 (19:18 +0200)]
b43: N-PHY: add PHY rev7+ workarounds

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agob43: N-PHY: update workarounds
Rafał Miłecki [Tue, 24 Jul 2012 17:18:19 +0000 (19:18 +0200)]
b43: N-PHY: update workarounds

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agobrcmsmac: use ieee80211_channel_to_frequency
Johannes Berg [Tue, 24 Jul 2012 15:35:57 +0000 (17:35 +0200)]
brcmsmac: use ieee80211_channel_to_frequency

Instead of hard-coding almost the same functionality,
just use ieee80211_channel_to_frequency() directly.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoBluetooth: Refactor in hci_le_conn_complete_evt
Andre Guedes [Fri, 27 Jul 2012 18:10:16 +0000 (15:10 -0300)]
Bluetooth: Refactor in hci_le_conn_complete_evt

This patch moves the hci_conn check to begining of hci_le_conn_
complete_evt in order to improve code's readability and better
error handling.

Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
12 years agoBluetooth: Lookup hci_conn in hci_le_conn_complete_evt
Andre Guedes [Fri, 27 Jul 2012 18:10:15 +0000 (15:10 -0300)]
Bluetooth: Lookup hci_conn in hci_le_conn_complete_evt

This patch does a trivial code refactoring in hci_conn lookup in
hci_le_conn_complete_evt. It performs the hci_conn lookup at the
begining of the function since it is used by both flows (error
and success).

Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
12 years agoBluetooth: Find hci_conn by BT_CONNECT state
Andre Guedes [Fri, 27 Jul 2012 18:10:14 +0000 (15:10 -0300)]
Bluetooth: Find hci_conn by BT_CONNECT state

This patch changes hci_cs_le_create_conn to perform hci_conn lookup
by state instead of bdaddr.

Since we can have only one LE connection in BT_CONNECT state, we can
perform LE hci_conn lookup by state. This way, we don't rely on
hci_sent_cmd_data helper to find the hci_conn object.

Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
12 years agoBluetooth: Refactor hci_cs_le_create_conn
Andre Guedes [Fri, 27 Jul 2012 18:10:13 +0000 (15:10 -0300)]
Bluetooth: Refactor hci_cs_le_create_conn

This patch does some code refactoring in hci_cs_le_create_conn
function. The hci_conn object is only needed in case of failure,
therefore hdev locking and hci_conn lookup were moved to
if-statement scope.

Also, the conn->state check was removed since we should always
close the connection if it fails.

Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
12 years agoBluetooth: Remove unneeded code
Andre Guedes [Fri, 27 Jul 2012 18:10:12 +0000 (15:10 -0300)]
Bluetooth: Remove unneeded code

This patch removes some unneeded code from hci_cs_le_create_conn.

If the hci_conn is not found, it means this LE connection attempt
was triggered by a thrid-party tool (e.g. hcitool). We should not
create this new hci_conn in LE Create Connection command status
event since it is already properly handled in LE Connection
Complete event.

Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
12 years agoBluetooth: Fix hci_le_conn_complete_evt
Andre Guedes [Fri, 27 Jul 2012 18:10:11 +0000 (15:10 -0300)]
Bluetooth: Fix hci_le_conn_complete_evt

We need to check the 'Role' parameter from the LE Connection
Complete Event in order to properly set 'out' and 'link_mode'
fields from hci_conn structure.

Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
12 years agoBluetooth: Trivial refactoring
Andre Guedes [Fri, 27 Jul 2012 18:10:10 +0000 (15:10 -0300)]
Bluetooth: Trivial refactoring

This patch replaces the unlock-and-return statements by the goto
statement.

Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
12 years agoBluetooth: Use devm_kzalloc in dtl1_cs.c file
Sachin Kamat [Fri, 27 Jul 2012 07:08:41 +0000 (12:38 +0530)]
Bluetooth: Use devm_kzalloc in dtl1_cs.c file

devm_kzalloc() eliminates the need to free memory explicitly
thereby saving some cleanup code.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>