David S. Miller [Sun, 8 Feb 2015 06:48:50 +0000 (22:48 -0800)]
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next
Jeff Kirsher says:
====================
Intel Wired LAN Driver Updates 2015-02-05
This series contains updates to fm10k, ixgbe and ixgbevf.
Matthew fixes an issue where fm10k does not properly drop the upper-most four
bits on of the VLAN ID due to type promotion, so resolve the issue by not
masking off the bits, but by throwing an error if the VLAN ID is out-of-bounds.
Then cleans up two cases where variables were not being used, but were
being set, so just remove the unused variables.
Don cleans up sparse errors in the x550 family file for ixgbe. Fixed up
a redundant setting of the default value for set_rxpba, which was done
twice accidentally. Cleaned up the probe routine to remove a redundant
attempt to identify the PHY, which could lead to a panic on x550. Added
support for VXLAN receive checksum offload in x550 hardware. Added the
Ethertype Anti-spoofing feature for affected devices.
Emil enables ixgbe and ixgbevf to allow multiple queues in SRIOV mode.
Adds RSS support for x550 per VF. Fixed up a couple of issues introduced
in commit 2b509c0cd292 ("ixgbe: cleanup ixgbe_ndo_set_vf_vlan"), fixed
setting of the VLAN inside ixgbe_enable_port_vlan() and disable the
"hide VLAN" bit in PFQDE when port VLAN is disabled. Cleaned up the
setting of vlan_features by enabling all features at once. Fixed the
ordering of the shutdown patch so that we attempt to shutdown the rings
more gracefully. We shutdown the main Rx filter in the case of Rx and we
set the carrier_off state in the case of Tx so that packets stop being
delivered from outside the driver. Then we shutdown interrupts and NAPI,
then finally stop the rings from performing DMA and clean them. Added
code to allow for Tx hang checking to provide more robust debug info in
the event of a transmit unit hang in ixgbevf. Cleaned up ixgbevf logic
dealing with link up/down by breaking down the link detection and up/down
events into separate functions, similar to how these events are handled
in other drivers. Combined the ixgbevf reset and watchdog tasks into a
single task so that we can avoid multiple schedules of the reset task when
we have a reset event needed due to either the mailbox going down or
transmit packets being present on a link down.
v2: Fixed up patch #03 of the series to remove the variable type change
based on feedback from David Laight
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
rds: Make rds_message_copy_from_user() return 0 on success.
Commit 083735f4b01b ("rds: switch rds_message_copy_from_user() to iov_iter")
breaks rds_message_copy_from_user() semantics on success, and causes it
to return nbytes copied, when it should return 0. This commit fixes that bug.
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jarno Rajahalme [Thu, 5 Feb 2015 21:40:49 +0000 (13:40 -0800)]
net: openvswitch: Support masked set actions.
OVS userspace already probes the openvswitch kernel module for
OVS_ACTION_ATTR_SET_MASKED support. This patch adds the kernel module
implementation of masked set actions.
The existing set action sets many fields at once. When only a subset
of the IP header fields, for example, should be modified, all the IP
fields need to be exact matched so that the other field values can be
copied to the set action. A masked set action allows modification of
an arbitrary subset of the supported header bits without requiring the
rest to be matched.
Masked set action is now supported for all writeable key types, except
for the tunnel key. The set tunnel action is an exception as any
input tunnel info is cleared before action processing starts, so there
is no tunnel info to mask.
The kernel module converts all (non-tunnel) set actions to masked set
actions. This makes action processing more uniform, and results in
less branching and duplicating the action processing code. When
returning actions to userspace, the fully masked set actions are
converted back to normal set actions. We use a kernel internal action
code to be able to tell the userspace provided and converted masked
set actions apart.
Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 8 Feb 2015 06:38:45 +0000 (22:38 -0800)]
Merge branch 'dsa-next'
Florian Fainelli says:
====================
net: dsa: bcm_sf2: GPHY power down
This patch series implement GPHY power up and down in the SF2 switch
driver in order to conserve power whenever possible (e.g: port is brought
down or unused during Wake-on-LAN).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement the power on/off recommended procedure for the Single GPHY we
have on our Starfighter 2 switch. In order to make sure we get proper
LED link/activity signaling during suspend, switch the link indication
from the Switch/MAC to the PHY.
Finally, since the GPHY needs to be reset to be put in low power mode,
we will loose any context applied to it: workarounds, EEE etc.. so we
need to call phy_init_hw() to get our fixups re-applied successfully.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: dsa: bcm_sf2: move GPHY enabling to its own function
Move the code that touches the single GPHY register from
bcm_sf2_sw_resume() to a separate function since we will have to
enable/disable the GPHY from different locations, and we want the code
to be self-contained.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 8 Feb 2015 06:22:25 +0000 (22:22 -0800)]
Merge tag 'nfc-next-3.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-next
NFC: 3.20 second pull request
This is the second NFC pull request for 3.20.
It brings:
- NCI NFCEE (NFC Execution Environment, typically an embedded or
external secure element) discovery and enabling/disabling support.
In order to communicate with an NFCEE, we also added NCI's logical
connections support to the NCI stack.
- HCI over NCI protocol support. Some secure elements only understand
HCI and thus we need to send them HCI frames when they're part of
an NCI chipset.
- NFC_EVT_TRANSACTION userspace API addition. Whenever an application
running on a secure element needs to notify its host counterpart,
we send an NFC_EVENT_SE_TRANSACTION event to userspace through the
NFC netlink socket.
- Secure element and HCI transaction event support for the st21nfcb
chipset.
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Graf [Fri, 6 Feb 2015 16:08:43 +0000 (16:08 +0000)]
rhashtable: Fix remove logic to avoid cross references between buckets
The remove logic properly searched the remaining chain for a matching
entry with an identical hash but it did this while searching from both
the old and new table. Instead in order to not leave stale references
behind we need to:
1. When growing and searching from the new table:
Search remaining chain for entry with same hash to avoid having
the new table directly point to a entry with a different hash.
2. When shrinking and searching from the old table:
Check if the element after the removed would create a cross
reference and avoid it if so.
These bugs were present from the beginning in nft_hash.
Also, both insert functions calculated the hash based on the mask of
the new table. This worked while growing. Wwhile shrinking, the mask
of the inew table is smaller than the mask of the old table. This lead
to a bit not being taken into account when selecting the bucket lock
and thus caused the wrong bucket to be locked eventually.
Fixes: 7e1e77636e36 ("lib: Resizable, Scalable, Concurrent Hash Table") Fixes: 97defe1ecf86 ("rhashtable: Per bucket locks & deferred expansion/shrinking") Reported-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 6 Feb 2015 23:18:39 +0000 (15:18 -0800)]
Merge branch 'rhashtable-next'
Thomas Graf says:
====================
rhashtable fixes
This series fixes all remaining known issues with rhashtable that
have been reported. In particular the race condition reported by
Ying Xue.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Graf [Thu, 5 Feb 2015 01:03:36 +0000 (02:03 +0100)]
rhashtable: Avoid bucket cross reference after removal
During a resize, when two buckets in the larger table map to
a single bucket in the smaller table and the new table has already
been (partially) linked to the old table. Removal of an element
may result the bucket in the larger table to point to entries
which all hash to a different value than the bucket index. Thus
causing two buckets to point to the same sub chain after unzipping.
This is not illegal *during* the resize phase but after it has
completed.
Keep the old table around until all of the unzipping is done to
allow the removal code to only search for matching hashed entries
during this special period.
Reported-by: Ying Xue <ying.xue@windriver.com> Fixes: 97defe1ecf86 ("rhashtable: Per bucket locks & deferred expansion/shrinking") Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Graf [Thu, 5 Feb 2015 01:03:33 +0000 (02:03 +0100)]
rhashtable: Wait for RCU readers after final unzip work
We need to wait for all RCU readers to complete after the last bit of
unzipping has been completed. Otherwise the old table is freed up
prematurely.
Fixes: 7e1e77636e36 ("lib: Resizable, Scalable, Concurrent Hash Table") Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Graf [Thu, 5 Feb 2015 01:03:32 +0000 (02:03 +0100)]
rhashtable: Use a single bucket lock for sibling buckets
rhashtable currently allows to use a bucket lock per bucket. This
requires multiple levels of complicated nested locking because when
resizing, a single bucket of the smaller table will map to two
buckets in the larger table. So far rhashtable has explicitly locked
both buckets in the larger table.
By excluding the highest bit of the hash from the bucket lock map and
thus only allowing locks to buckets in a ratio of 1:2, the locking
can be simplified a lot without losing the benefits of multiple locks.
Larger tables which benefit from multiple locks will not have a single
lock per bucket anyway.
Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Graf [Thu, 5 Feb 2015 01:03:31 +0000 (02:03 +0100)]
rhashtable: key_hashfn() must return full hash value
The value computed by key_hashfn() is used by rhashtable_lookup_compare()
to traverse both tables during a resize. key_hashfn() must therefore
return the hash value without the buckets mask applied so it can be
masked to the size of each individual table.
Fixes: 97defe1ecf86 ("rhashtable: Per bucket locks & deferred expansion/shrinking") Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Don Skidmore [Wed, 28 Jan 2015 07:03:38 +0000 (07:03 +0000)]
ixgbe: add Tx anti spoofing support
This patch enables the ethertype Anti-Spoofing feature for affected
devices. It is configured such that LLDP packets sent by a VF will
be dropped.
Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Emil Tantilov [Wed, 28 Jan 2015 03:21:34 +0000 (03:21 +0000)]
ixgbevf: combine all of the tasks into a single service task
This change combines the reset and watchdog tasklets into a single task.
The advantage of this is that we can avoid multiple schedules of the reset
task when we have a reset event needed due to either the mailbox going down
or transmit packets being present on a link down.
CC: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Emil Tantilov [Wed, 28 Jan 2015 03:21:29 +0000 (03:21 +0000)]
ixgbevf: rewrite watchdog task to function similar to igbvf
This patch cleans up the logic dealing with link down/up by breaking down the
link detection and up/down events into separate functions - similar to how these
events are handled in other drivers.
CC: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Emil Tantilov [Wed, 28 Jan 2015 03:21:24 +0000 (03:21 +0000)]
ixgbevf: Add code to check for Tx hang
This patch adds code to allow for Tx hang checking. The idea is to provide
more robust debug info in the event of a transmit unit hang. Similar to the
logic in ixgbe.
CC: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Emil Tantilov [Wed, 28 Jan 2015 03:21:18 +0000 (03:21 +0000)]
ixgbevf: Fix ordering of shutdown to correctly disable Rx and Tx
This patch updates the ordering of the shutdown path so that we attempt to
shutdown the rings more gracefully. Basically the big changes are that we
shutdown the main Rx filter in the case of Rx and we set the carrier_off
state in the case of Tx so that packets stop being delivered from outside
the driver. Then we shut down interrupts and NAPI. Finally we stop the
rings from performing DMA and clean them. This is a bit more graceful than
the previous path.
CC: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Emil Tantilov [Wed, 28 Jan 2015 03:21:13 +0000 (03:21 +0000)]
ixgbevf: set vlan_features in a single write instead of several ORs
Clean up the setting of vlan_features by enabling all features at once.
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Don Skidmore [Fri, 12 Dec 2014 05:37:30 +0000 (05:37 +0000)]
ixgbe: Cleanup probe to remove redundant attempt to ID PHY
We always identify the PHY in our reset_hw path anyway so there is
no need to do it in get_invariants(). The reason I even noticed this
is that for new hardware (X550em) we don't assign some methods until
later in probe and calling phy.ops.read_reg could lead to a panic.
Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Don Skidmore [Sat, 6 Dec 2014 05:59:21 +0000 (05:59 +0000)]
ixgbe: cleanup sparse errors in new ixgbe_x550.c file
This patch cleans up prototypes that should have been defined
as static.
Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Matthew Vick [Tue, 27 Jan 2015 02:33:26 +0000 (02:33 +0000)]
fm10k: Validate VLAN ID in fm10k_update_xc_addr_pf
Currently, fm10k_update_xc_addr_pf has an issue where it does not
properly drop the upper-most four bits of the VLAN ID due to type
promotion. Resolve the issue not by masking off the bits, but by
throwing an error if the VLAN ID is out-of-bounds.
Reported-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Lad, Prabhakar [Thu, 5 Feb 2015 13:38:07 +0000 (13:38 +0000)]
xen-netback: fix sparse warning
this patch fixes following sparse warning:
interface.c:83:5: warning: symbol 'xenvif_poll' was not declared. Should it be static?
Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Lad, Prabhakar [Thu, 5 Feb 2015 16:21:07 +0000 (16:21 +0000)]
net/macb: fix sparse warning
this patch fixes following sparse warning:
macb.c:2038:26: warning: symbol 'gem_ethtool_ops' was not declared. Should it be static?
Alongside drops exporting of gem_ethtool_ops as there is no need.
Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Lad, Prabhakar [Thu, 5 Feb 2015 15:47:17 +0000 (15:47 +0000)]
net: bnx2x: fix sparse warnings
this patch fixes following sparse warnings:
bnx2x_main.c:9172:6: warning: symbol 'bnx2x_stop_ptp' was not declared. Should it be static?
bnx2x_main.c:13321:6: warning: symbol 'bnx2x_register_phc' was not declared. Should it be static?
bnx2x_main.c:14638:5: warning: symbol 'bnx2x_enable_ptp_packets' was not declared. Should it be static?
Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Lad, Prabhakar [Thu, 5 Feb 2015 15:34:13 +0000 (15:34 +0000)]
enic: enic_main: fix sparse warnings
this patch fixes following sparse warnings:
enic_main.c:92:28: warning: symbol 'mod_table' was not declared. Should it be static?
enic_main.c:109:28: warning: symbol 'mod_range' was not declared. Should it be static?
enic_main.c:1306:5: warning: symbol 'enic_busy_poll' was not declared. Should it be static?
Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Lad, Prabhakar [Thu, 5 Feb 2015 15:06:33 +0000 (15:06 +0000)]
hyperv: fix sparse warnings
this patch fixes following sparse warnings:
netvsc.c:688:5: warning: symbol 'netvsc_copy_to_send_buf' was not declared. Should it be static?
rndis_filter.c:627:5: warning: symbol 'rndis_filter_set_offload_params' was not declared. Should it be static?
rndis_filter.c:702:5: warning: symbol 'rndis_filter_set_rss_param' was not declared. Should it be static?
Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 6 Feb 2015 00:00:06 +0000 (16:00 -0800)]
Merge branch 'tipc-next'
Jon Maloy says:
====================
tipc: resolve message disordering problem
When TIPC receives messages from multi-threaded device drivers it may
occasionally deliver messages to their destination sockets in the wrong
order. This happens despite correct resequencing at the link layer,
because the upcall path from link to socket is not protected by any
locks.
These commits solve this problem by introducing an 'input' message
queue in each link, through which messages must be delivered to the
upper layers.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Paul Maloy [Thu, 5 Feb 2015 13:36:44 +0000 (08:36 -0500)]
tipc: eliminate race condition at multicast reception
In a previous commit in this series we resolved a race problem during
unicast message reception.
Here, we resolve the same problem at multicast reception. We apply the
same technique: an input queue serializing the delivery of arriving
buffers. The main difference is that here we do it in two steps.
First, the broadcast link feeds arriving buffers into the tail of an
arrival queue, which head is consumed at the socket level, and where
destination lookup is performed. Second, if the lookup is successful,
the resulting buffer clones are fed into a second queue, the input
queue. This queue is consumed at reception in the socket just like
in the unicast case. Both queues are protected by the same lock, -the
one of the input queue.
Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Paul Maloy [Thu, 5 Feb 2015 13:36:43 +0000 (08:36 -0500)]
tipc: simplify socket multicast reception
The structure 'tipc_port_list' is used to collect port numbers
representing multicast destination socket on a receiving node.
The list is not based on a standard linked list, and is in reality
optimized for the uncommon case that there are more than one
multicast destinations per node. This makes the list handling
unecessarily complex, and as a consequence, even the socket
multicast reception becomes more complex.
In this commit, we replace 'tipc_port_list' with a new 'struct
tipc_plist', which is based on a standard list. We give the new
list stack (push/pop) semantics, someting that simplifies
the implementation of the function tipc_sk_mcast_rcv().
Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Paul Maloy [Thu, 5 Feb 2015 13:36:42 +0000 (08:36 -0500)]
tipc: simplify connection abort notifications when links break
The new input message queue in struct tipc_link can be used for
delivering connection abort messages to subscribing sockets. This
makes it possible to simplify the code for such cases.
This commit removes the temporary list in tipc_node_unlock()
used for transforming abort subscriptions to messages. Instead, the
abort messages are now created at the moment of lost contact, and
then added to the last failed link's generic input queue for delivery
to the sockets concerned.
Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Paul Maloy [Thu, 5 Feb 2015 13:36:41 +0000 (08:36 -0500)]
tipc: resolve race problem at unicast message reception
TIPC handles message cardinality and sequencing at the link layer,
before passing messages upwards to the destination sockets. During the
upcall from link to socket no locks are held. It is therefore possible,
and we see it happen occasionally, that messages arriving in different
threads and delivered in sequence still bypass each other before they
reach the destination socket. This must not happen, since it violates
the sequentiality guarantee.
We solve this by adding a new input buffer queue to the link structure.
Arriving messages are added safely to the tail of that queue by the
link, while the head of the queue is consumed, also safely, by the
receiving socket. Sequentiality is secured per socket by only allowing
buffers to be dequeued inside the socket lock. Since there may be multiple
simultaneous readers of the queue, we use a 'filter' parameter to reduce
the risk that they peek the same buffer from the queue, hence also
reducing the risk of contention on the receiving socket locks.
This solves the sequentiality problem, and seems to cause no measurable
performance degradation.
A nice side effect of this change is that lock handling in the functions
tipc_rcv() and tipc_bcast_rcv() now becomes uniform, something that
will enable future simplifications of those functions.
Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Paul Maloy [Thu, 5 Feb 2015 13:36:40 +0000 (08:36 -0500)]
tipc: use existing sk_write_queue for outgoing packet chain
The list for outgoing traffic buffers from a socket is currently
allocated on the stack. This forces us to initialize the queue for
each sent message, something costing extra CPU cycles in the most
critical data path. Later in this series we will introduce a new
safe input buffer queue, something that would force us to initialize
even the spinlock of the outgoing queue. A closer analysis reveals
that the queue always is filled and emptied within the same lock_sock()
session. It is therefore safe to use a queue aggregated in the socket
itself for this purpose. Since there already exists a queue for this
in struct sock, sk_write_queue, we introduce use of that queue in
this commit.
Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Paul Maloy [Thu, 5 Feb 2015 13:36:39 +0000 (08:36 -0500)]
tipc: split up function tipc_msg_eval()
The function tipc_msg_eval() is in reality doing two related, but
different tasks. First it tries to find a new destination for named
messages, in case there was no first lookup, or if the first lookup
failed. Second, it does what its name suggests, evaluating the validity
of the message and its destination, and returning an appropriate error
code depending on the result.
This is confusing, and in this commit we choose to break it up into two
functions. A new function, tipc_msg_lookup_dest(), first attempts to find
a new destination, if the message is of the right type. If this lookup
fails, or if the message should not be subject to a second lookup, the
already existing tipc_msg_reverse() is called. This function performs
prepares the message for rejection, if applicable.
Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Paul Maloy [Thu, 5 Feb 2015 13:36:38 +0000 (08:36 -0500)]
tipc: enqueue arrived buffers in socket in separate function
The code for enqueuing arriving buffers in the function tipc_sk_rcv()
contains long code lines and currently goes to two indentation levels.
As a cosmetic preparaton for the next commits, we break it out into
a separate function.
Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Paul Maloy [Thu, 5 Feb 2015 13:36:37 +0000 (08:36 -0500)]
tipc: simplify message forwarding and rejection in socket layer
Despite recent improvements, the handling of error codes and return
values at reception of messages in the socket layer is still confusing.
In this commit, we try to make it more comprehensible. First, we
separate between the return values coming from the functions called
by tipc_sk_rcv(), -those are TIPC specific error codes, and the
return values returned by tipc_sk_rcv() itself. Second, we don't
use the returned TIPC error code as indication for whether a buffer
should be forwarded/rejected or not; instead we use the buffer pointer
passed along with filter_msg(). This separation is necessary because
we sometimes want to forward messages even when there is no error
(i.e., protocol messages and successfully secondary looked up data
messages).
Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Paul Maloy [Thu, 5 Feb 2015 13:36:36 +0000 (08:36 -0500)]
tipc: reduce usage of context info in socket and link
The most common usage of namespace information is when we fetch the
own node addess from the net structure. This leads to a lot of
passing around of a parameter of type 'struct net *' between
functions just to make them able to obtain this address.
However, in many cases this is unnecessary. The own node address
is readily available as a member of both struct tipc_sock and
tipc_link, and can be fetched from there instead.
The fact that the vast majority of functions in socket.c and link.c
anyway are maintaining a pointer to their respective base structures
makes this option even more compelling.
In this commit, we introduce the inline functions tsk_own_node()
and link_own_node() to make it easy for functions to fetch the node
address from those structs instead of having to pass along and
dereference the namespace struct.
In particular, we make calls to the msg_xx() functions in msg.{h,c}
context independent by directly passing them the own node address
as parameter when needed. Those functions should be regarded as
leaves in the code dependency tree, and it is hence desirable to
keep them namspace unaware.
Apart from a potential positive effect on cache behavior, these
changes make it easier to introduce the changes that will follow
later in this series.
Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Takashi Iwai [Thu, 5 Feb 2015 10:15:24 +0000 (11:15 +0100)]
hso: Use static attribute groups for sysfs entry
Pass the static attribute groups and the driver data via
tty_port_register_device_attr() instead of manual device_create_file()
and device_remove_file() calls.
Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
The net/core/dev.c conflict was the overlap of one commit marking an
existing function static whilst another was adding a new function.
In the include/linux/if_vlan.h case, the type used for a local
variable was changed in 'net', whereas the function got rewritten
to fix a stacked vlan bug in 'net-next'.
In drivers/vhost/net.c, Al Viro's iov_iter conversions in 'net-next'
overlapped with an endainness fix for VHOST 1.0 in 'net'.
In drivers/net/vxlan.c, vxlan_find_vni() added a 'flags' parameter
in 'net-next' whereas in 'net' there was a bug fix to pass in the
correct network namespace pointer in calls to this function.
Signed-off-by: David S. Miller <davem@davemloft.net>
1) Stretch ACKs can kill performance with Reno and CUBIC congestion
control, largely due to LRO and GRO. Fix from Neal Cardwell.
2) Fix userland breakage because we accidently emit zero length netlink
messages from the bridging code. From Roopa Prabhu.
3) Carry handling in generic csum_tcpudp_nofold is broken, fix from
Karl Beldan.
4) Remove bogus dev_set_net() calls from CAIF driver, from Nicolas
Dichtel.
5) Make sure PPP deflation never returns a length greater then the
output buffer, otherwise we overflow and trigger skb_over_panic().
Fix from Florian Westphal.
6) COSA driver needs VIRT_TO_BUS Kconfig dependencies, from Arnd
Bergmann.
7) Don't increase route cached MTU on datagram too big ICMPs. From Li
Wei.
8) Fix error path leaks in nf_tables, from Pablo Neira Ayuso.
9) Fix bitmask handling regression in netlink that broke things like
acpi userland tools. From Pablo Neira Ayuso.
10) Wrong header pointer passed to param_type2af() in SCTP code, from
Saran Maruti Ramanara.
11) Stacked vlans not handled correctly by vlan_get_protocol(), from
Toshiaki Makita.
12) Add missing DMA memory barrier to xgene driver, from Iyappan
Subramanian.
13) Fix crash in rate estimators, from Eric Dumazet.
14) We've been adding various workarounds, one after another, for the
change which added the per-net tcp_sock. It was meant to reduce
socket contention but added lots of problems.
Reduce this instead to a proper per-cpu socket and that rids us of
all the daemons.
From Eric Dumazet.
15) Fix memory corruption and OOPS in mlx4 driver, from Jack
Morgenstein.
16) When we disabled UFO in the virtio_net device, it introduces some
serious performance regressions. The orignal problem was IPV6
fragment ID generation, so fix that properly instead. From Vlad
Yasevich.
17) sr9700 driver build breaks on xtensa because it defines macros with
the same name as those used by the arch code. Use more unique
names. From Chen Gang.
18) Fix endianness in new virio 1.0 mode of the vhost net driver, from
Michael S Tsirkin.
19) Several sysctls were setting the maxlen attribute incorrectly, from
Sasha Levin.
20) Don't accept an FQ scheduler quantum of zero, that leads to crashes.
From Kenneth Klette Jonassen.
21) Fix dumping of non-existing actions in the packet scheduler
classifier. From Ignacy Gawędzki.
22) Return the write work_done value when doing TX work in the qlcnic
driver.
23) ip6gre_err accesses the info field with the wrong endianness, from
Sabrina Dubroca.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (54 commits)
sit: fix some __be16/u16 mismatches
ipv6: fix sparse errors in ip6_make_flowlabel()
net: remove some sparse warnings
flow_keys: n_proto type should be __be16
ip6_gre: fix endianness errors in ip6gre_err
qlcnic: Fix NAPI poll routine for Tx completion
amd-xgbe: Set RSS enablement based on hardware features
amd-xgbe: Adjust for zero-based traffic class count
cls_api.c: Fix dumping of non-existing actions' stats.
pkt_sched: fq: avoid hang when quantum 0
net: rds: use correct size for max unacked packets and bytes
vhost/net: fix up num_buffers endian-ness
gianfar: correct the bad expression while writing bit-pattern
net: usb: sr9700: Use 'SR_' prefix for the common register macros
Revert "drivers/net: Disable UFO through virtio"
Revert "drivers/net, ipv6: Select IPv6 fragment idents for virtio UFO packets"
ipv6: Select fragment id during UFO segmentation if not set.
xen-netback: stop the guest rx thread after a fatal error
net/mlx4_core: Fix kernel Oops (mem corruption) when working with more than 80 VFs
isdn: off by one in connect_res()
...
Linus Torvalds [Thu, 5 Feb 2015 19:17:15 +0000 (11:17 -0800)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This patch set is fixing two serious problems which have turned up
late in the release cycle.
The first fixes a problem with 4k sector disks where the transfer
length (amount of data sent to the disk) was getting increased every
time the disk was revalidated leading to potential for overflows.
The other is a regression oops fix for some of our last merge window
code"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
sd: Fix max transfer length for 4k disks
scsi: fix device handler detach oops
Linus Torvalds [Thu, 5 Feb 2015 19:11:44 +0000 (11:11 -0800)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Radeon and amdkfd fixes.
Radeon ones mostly for oops in some test/benchmark functions since
fencing changes, and one regression fix for old GPUs,
There is one cirrus regression fix, the 32bpp broke userspace, so this
hides it behind a module option for the few users who care.
I'm off for a few days, so this is probably the final pull I have, if
I see fixes from Intel I'll forward the pull as I should have email"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/cirrus: Limit modes depending on bpp option
drm/radeon: fix the crash in test functions
drm/radeon: fix the crash in benchmark functions
drm/radeon: properly set vm fragment size for TN/RL
drm/radeon: don't init gpuvm if accel is disabled (v3)
drm/radeon: fix PLLs on RS880 and older v2
drm/amdkfd: Don't create BUG due to incorrect user parameter
drm/amdkfd: max num of queues can't be 0
drm/amdkfd: Fix bug in accounting of queues
Linus Torvalds [Thu, 5 Feb 2015 19:07:25 +0000 (11:07 -0800)]
Merge tag 'spi-v3.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A couple of driver specific fixes:
- Disable DMA mode for i.MX6DL chips due to a hardware bug.
- Don't use devm_kzalloc() outside of bind/unbind paths in the
fsl-dspi driver, fixing memory leaks"
* tag 'spi-v3.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: imx: use pio mode for i.mx6dl
spi: spi-fsl-dspi: Remove usage of devm_kzalloc
Linus Torvalds [Thu, 5 Feb 2015 18:57:29 +0000 (10:57 -0800)]
Merge tag 'pm+acpi-3.19-fin' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI power management fix from Rafael Wysocki:
"This is a revert of an ACPI Low-power Subsystem (LPSS) driver change
that was supposed to improve power management of the LPSS DMA
controller, but introduced more serious problems.
Since fixing them turns out to be non-trivial, it is better to revert
the commit in question at this point and try to fix the original issue
differently in the next cycle"
* tag 'pm+acpi-3.19-fin' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "ACPI / LPSS: introduce a 'proxy' device to power on LPSS for DMA"
Eric Dumazet [Wed, 4 Feb 2015 23:12:04 +0000 (15:12 -0800)]
sit: fix some __be16/u16 mismatches
Fixes following sparse warnings :
net/ipv6/sit.c:1509:32: warning: incorrect type in assignment (different base types)
net/ipv6/sit.c:1509:32: expected restricted __be16 [usertype] sport
net/ipv6/sit.c:1509:32: got unsigned short
net/ipv6/sit.c:1514:32: warning: incorrect type in assignment (different base types)
net/ipv6/sit.c:1514:32: expected restricted __be16 [usertype] dport
net/ipv6/sit.c:1514:32: got unsigned short
net/ipv6/sit.c:1711:38: warning: incorrect type in argument 3 (different base types)
net/ipv6/sit.c:1711:38: expected unsigned short [unsigned] [usertype] value
net/ipv6/sit.c:1711:38: got restricted __be16 [usertype] sport
net/ipv6/sit.c:1713:38: warning: incorrect type in argument 3 (different base types)
net/ipv6/sit.c:1713:38: expected unsigned short [unsigned] [usertype] value
net/ipv6/sit.c:1713:38: got restricted __be16 [usertype] dport
Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Wed, 4 Feb 2015 23:03:25 +0000 (15:03 -0800)]
ipv6: fix sparse errors in ip6_make_flowlabel()
include/net/ipv6.h:713:22: warning: incorrect type in assignment (different base types)
include/net/ipv6.h:713:22: expected restricted __be32 [usertype] hash
include/net/ipv6.h:713:22: got unsigned int
include/net/ipv6.h:719:25: warning: restricted __be32 degrades to integer
include/net/ipv6.h:719:22: warning: invalid assignment: ^=
include/net/ipv6.h:719:22: left side has type restricted __be32
include/net/ipv6.h:719:22: right side has type unsigned int
Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Wed, 4 Feb 2015 21:31:54 +0000 (13:31 -0800)]
flow_keys: n_proto type should be __be16
(struct flow_keys)->n_proto is in network order, use
proper type for this.
Fixes following sparse errors :
net/core/flow_dissector.c:139:39: warning: incorrect type in assignment (different base types)
net/core/flow_dissector.c:139:39: expected unsigned short [unsigned] [usertype] n_proto
net/core/flow_dissector.c:139:39: got restricted __be16 [assigned] [usertype] proto
net/core/flow_dissector.c:237:23: warning: incorrect type in assignment (different base types)
net/core/flow_dissector.c:237:23: expected unsigned short [unsigned] [usertype] n_proto
net/core/flow_dissector.c:237:23: got restricted __be16 [assigned] [usertype] proto
Signed-off-by: Eric Dumazet <edumazet@google.com> Fixes: e0f31d849867 ("flow_keys: Record IP layer protocol in skb_flow_dissect()") Signed-off-by: David S. Miller <davem@davemloft.net>
Markus Elfring [Wed, 4 Feb 2015 14:56:58 +0000 (15:56 +0100)]
net: ep93xx_eth: Delete unnecessary checks before the function call "kfree"
The kfree() function tests whether its argument is NULL and then
returns immediately. Thus the test around the call is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Sabrina Dubroca [Wed, 4 Feb 2015 14:25:09 +0000 (15:25 +0100)]
ip6_gre: fix endianness errors in ip6gre_err
info is in network byte order, change it back to host byte order
before use. In particular, the current code sets the MTU of the tunnel
to a wrong (too big) value.
Fixes: c12b395a4664 ("gre: Support GRE over IPv6") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Takashi Iwai [Wed, 4 Feb 2015 13:38:55 +0000 (14:38 +0100)]
xen-netfront: Use static attribute groups for sysfs entries
Instead of manual calls of device_create_file() and
device_remove_files(), assign the static attribute groups to netdev
groups array. This simplifies the code and avoids the possible
races.
Signed-off-by: Takashi Iwai <tiwai@suse.de> Acked-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Takashi Iwai [Wed, 4 Feb 2015 13:37:34 +0000 (14:37 +0100)]
tun: Use static attribute groups for sysfs entries
Instead of manual calls of device_create_file() and
device_remove_files(), assign the static attribute groups to netdev
groups array. This simplifies the code and avoids the possible
races.
Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
this is a pull request of 2 patches for net-next/master.
Nicholas Mc Guire contributes a patch for the janz-ican3 driver to fix
a mismatch in an assignment. Ahmed S. Darwish contributes a patch for
the kvaser_usb driver, to make the driver more robust during the
bus-off handling.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Shahed Shaikh [Wed, 4 Feb 2015 10:41:25 +0000 (05:41 -0500)]
qlcnic: Fix NAPI poll routine for Tx completion
After d75b1ade567f ("net: less interrupt masking in NAPI")
driver's NAPI poll routine is expected to return
exact budget value if it wants to be re-called.
Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Fixes: d75b1ade567f ("net: less interrupt masking in NAPI") Signed-off-by: David S. Miller <davem@davemloft.net>
cxgb_busy_poll, corresponding to ndo_busy_poll, gets called by the socket
waiting for data.
With busy_poll enabled, improvement is seen in latency numbers as observed by
collecting netperf TCP_RR numbers.
Below are latency number, with and without busy-poll, in a switched environment
for a particular msg size:
netperf command: netperf -4 -H <ip> -l 30 -t TCP_RR -- -r1,1
Latency without busy-poll: ~16.25 us
Latency with busy-poll : ~08.79 us
Based on original work by Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Thu, 5 Feb 2015 05:30:40 +0000 (21:30 -0800)]
pkt_sched: fq: better control of DDOS traffic
FQ has a fast path for skb attached to a socket, as it does not
have to compute a flow hash. But for other packets, FQ being non
stochastic means that hosts exposed to random Internet traffic
can allocate million of flows structure (104 bytes each) pretty
easily. Not only host can OOM, but lookup in RB trees can take
too much cpu and memory resources.
This patch adds a new attribute, orphan_mask, that is adding
possibility of having a stochastic hash for orphaned skb.
Its default value is 1024 slots, to mimic SFQ behavior.
Note: This does not apply to locally generated TCP traffic,
and no locally generated traffic will share a flow structure
with another perfect or stochastic flow.
This patch also handles the specific case of SYNACK messages:
They are attached to the listener socket, and therefore all map
to a single hash bucket. If listener have set SO_MAX_PACING_RATE,
hoping to have new accepted socket inherit this rate, SYNACK
might be paced and even dropped.
This is very similar to an internal patch Google have used more
than one year.
Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Wed, 4 Feb 2015 02:31:53 +0000 (18:31 -0800)]
tcp: do not pace pure ack packets
When we added pacing to TCP, we decided to let sch_fq take care
of actual pacing.
All TCP had to do was to compute sk->pacing_rate using simple formula:
sk->pacing_rate = 2 * cwnd * mss / rtt
It works well for senders (bulk flows), but not very well for receivers
or even RPC :
cwnd on the receiver can be less than 10, rtt can be around 100ms, so we
can end up pacing ACK packets, slowing down the sender.
Really, only the sender should pace, according to its own logic.
Instead of adding a new bit in skb, or call yet another flow
dissection, we tweak skb->truesize to a small value (2), and
we instruct sch_fq to use new helper and not pace pure ack.
Note this also helps TCP small queue, as ack packets present
in qdisc/NIC do not prevent sending a data packet (RPC workload)
This helps to reduce tx completion overhead, ack packets can use regular
sock_wfree() instead of tcp_wfree() which is a bit more expensive.
This has no impact in the case packets are sent to loopback interface,
as we do not coalesce ack packets (were we would detect skb->truesize
lie)
In case netem (with a delay) is used, skb_orphan_partial() also sets
skb->truesize to 1.
This patch is a combination of two patches we used for about one year at
Google.
Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 5 Feb 2015 04:35:05 +0000 (20:35 -0800)]
Merge branch 'rhashtable-next'
Herbert Xu says:
====================
rhashtable: Add iterators and use them
The first patch fixes a potential crash with nft_hash destroying
the table during a shrinking process. While the next patch adds
rhashtable iterators to replace current manual walks used by
netlink and netfilter. The final two patches make use of these
iterators in netlink and netfilter.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Herbert Xu [Tue, 3 Feb 2015 20:33:25 +0000 (07:33 +1100)]
netfilter: Use rhashtable walk iterator
This patch gets rid of the manual rhashtable walk in nft_hash
which touches rhashtable internals that should not be exposed.
It does so by using the rhashtable iterator primitives.
Note that I'm leaving nft_hash_destroy alone since it's only
invoked on shutdown and it shouldn't be affected by changes
to rhashtable internals (or at least not what I'm planning to
change).
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
Herbert Xu [Tue, 3 Feb 2015 20:33:24 +0000 (07:33 +1100)]
netlink: Use rhashtable walk iterator
This patch gets rid of the manual rhashtable walk in netlink
which touches rhashtable internals that should not be exposed.
It does so by using the rhashtable iterator primitives.
In fact the existing code was very buggy. Some sockets weren't
shown at all while others were shown more than once.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
Herbert Xu [Tue, 3 Feb 2015 20:33:23 +0000 (07:33 +1100)]
rhashtable: Introduce rhashtable_walk_*
Some existing rhashtable users get too intimate with it by walking
the buckets directly. This prevents us from easily changing the
internals of rhashtable.
This patch adds the helpers rhashtable_walk_init/exit/start/next/stop
which will replace these custom walkers.
They are meant to be usable for both procfs seq_file walks as well
as walking by a netlink dump. The iterator structure should fit
inside a netlink dump cb structure, with at least one element to
spare.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
Herbert Xu [Tue, 3 Feb 2015 20:33:22 +0000 (07:33 +1100)]
rhashtable: Fix potential crash on destroy in rhashtable_shrink
The current being_destroyed check in rhashtable_expand is not
enough since if we start a shrinking process after freeing all
elements in the table that's also going to crash.
This patch adds a being_destroyed check to the deferred worker
thread so that we bail out as soon as we take the lock.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
amd-xgbe: Set RSS enablement based on hardware features
The RSS support requires enablement based on the features reported by
the hardware. The setting of this flag is missing. Add support to
set the RSS enablement flag based on the reported hardware features.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Markus Elfring [Tue, 3 Feb 2015 19:12:25 +0000 (20:12 +0100)]
NetCP: Deletion of unnecessary checks before two function calls
The functions cpsw_ale_destroy() and of_dev_put() test whether their argument
is NULL and then return immediately. Thus the test around the call
is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>