Tobias Klauser [Tue, 25 May 2010 14:59:55 +0000 (16:59 +0200)]
altera_uart: Don't take spinlock in already protected functions
Don't take the port spinlock in uart functions where the serial core
already takes care of locking/unlocking them.
The code would actually lock up on architectures where spinlocks are
implemented (not the case on nios2 where this driver is primarily used
for now, thus this bug didn't trigger).
Also protect calling altera_uart_rx_chars/altera_uart_tx_chars in the
interrupt handler by the port spinlock.
Thanks to Ian Abbott for pointing these issues out.
Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Thomas Chou <thomas@wytron.com.tw> Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Dan Carpenter [Tue, 25 May 2010 09:37:17 +0000 (11:37 +0200)]
TTY/n_gsm: potential double lock
In gsm_dlci_data_kick() we call gsm_dlci_data_sweep() with the
"gsm->tx_lock" held so we can't lock it again inside
gsm_dlci_data_sweep(). I removed that lock from and added one to
gsmld_write_wakeup() instead. The sweep function is only called from
those two places.
Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Alan Cox <alan@linux.intel.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Graf Yang [Sun, 23 May 2010 08:40:13 +0000 (04:40 -0400)]
serial: bfin_5xx: IRDA is not affected by anomaly 05000230
Anomaly 05000230 (over sampling of the UART STOP bit) applies only when
the peripheral is operating in UART mode. So drop the anomaly handling
when the UART is in IRDA mode.
Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Set the mnd counter based on uartclk. This fixes a problem
on 7x30 where the uartclk is 19.2Mhz rather than the usual
4.8Mhz.
Trout incorrectly reports uartclk to be running at 19.2Mhz
It is actually running at 4.8Mhz. For trout force mnd
counter values as if uartclk was fed by tcxo/4.
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
[dwalker@codeaurora.org: inlined, moved into header, added comments.] Signed-off-by: Daniel Walker <dwalker@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Linus Torvalds [Thu, 3 Jun 2010 22:48:15 +0000 (15:48 -0700)]
Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
libata: implement on-demand HPA unlocking
libata: use the enlarged capacity after late HPA unlock
SCSI: implement sd_unlock_native_capacity()
libata-sff: trivial corrections to Kconfig help text
sata_nv: don't diddle with nIEN on mcp55
sata_via: magic vt6421 fix for transmission problems w/ WD drives
Linus Torvalds [Thu, 3 Jun 2010 22:47:51 +0000 (15:47 -0700)]
Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
sched, trace: Fix sched_switch() prev_state argument
sched: Fix wake_affine() vs RT tasks
sched: Make sure timers have migrated before killing the migration_thread
Linus Torvalds [Thu, 3 Jun 2010 22:47:22 +0000 (15:47 -0700)]
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, smpboot: Fix cores per node printing on boot
x86/amd-iommu: Fall back to GART if initialization fails
x86/amd-iommu: Fix crash when request_mem_region fails
x86/mm: Remove unused DBG() macro
arch/x86/kernel: Add missing spin_unlock
Linus Torvalds [Thu, 3 Jun 2010 22:46:37 +0000 (15:46 -0700)]
Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
powerpc/macio: Fix probing of macio devices by using the right of match table
agp/uninorth: Fix oops caused by flushing too much
powerpc/pasemi: Update MAINTAINERS file
powerpc/cell: Fix integer constant warning
powerpc/kprobes: Remove resume_execution() in kprobes
powerpc/macio: Don't dereference pointer before null check
Linus Torvalds [Thu, 3 Jun 2010 22:46:09 +0000 (15:46 -0700)]
Merge branch 'for-linus/bugfixes' of git://xenbits.xensource.com/people/ianc/linux-2.6
* 'for-linus/bugfixes' of git://xenbits.xensource.com/people/ianc/linux-2.6:
xen: avoid allocation causing potential swap activity on the resume path
xen: ensure timer tick is resumed even on CPU driving the resume
Linus Torvalds [Thu, 3 Jun 2010 22:45:26 +0000 (15:45 -0700)]
Merge branch 'perf-fixes-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perf-fixes-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
perf: Fix crash in swevents
perf buildid-list: Fix --with-hits event processing
perf scripts python: Give field dict to unhandled callback
perf hist: fix objdump output parsing
perf-record: Check correct pid when forking
perf: Do the comm inheritance per thread in event__process_task
perf: Use event__process_task from perf sched
perf: Process comm events by tid
blktrace: Fix new kernel-doc warnings
perf_events: Fix unincremented buffer base on partial copy
perf_events: Fix event scheduling issues introduced by transactional API
perf_events, trace: Fix perf_trace_destroy(), mutex went missing
perf_events, trace: Fix probe unregister race
perf_events: Fix races in group composition
perf_events: Fix races and clean up perf_event and perf_mmap_data interaction
Linus Torvalds [Thu, 3 Jun 2010 22:45:03 +0000 (15:45 -0700)]
Merge branch 'virtio' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus
* 'virtio' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
virtio: console: Fix crash when port is unplugged and blocked for write
virtio: console: Fix crash when hot-unplugging a port and read is blocked
virtio-blk: fix minimum number of S/G elements
Peter Zijlstra [Thu, 3 Jun 2010 09:21:20 +0000 (11:21 +0200)]
perf: Fix crash in swevents
Frederic reported that because swevents handling doesn't disable IRQs
anymore, we can get a recursion of perf_adjust_period(), once from
overflow handling and once from the tick.
If both call ->disable, we get a double hlist_del_rcu() and trigger
a LIST_POISON2 dereference.
Since we don't actually need to stop/start a swevent to re-programm
the hardware (lack of hardware to program), simply nop out these
callbacks for the swevent pmu.
Linus Torvalds [Thu, 3 Jun 2010 14:19:45 +0000 (07:19 -0700)]
Merge branch 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (41 commits)
drm/radeon/kms: make sure display hw is disabled when suspending
drm/vmwgfx: Allow userspace to change default layout. Bump minor.
drm/vmwgfx: Fix framebuffer modesetting
drm/vmwgfx: Fix vga save / restore with display topology.
vgaarb: use MIT license
vgaarb: convert pr_devel() to pr_debug()
drm: fix typos in Linux DRM Developer's Guide
drm/radeon/kms/pm: voltage fixes
drm/radeon/kms/pm: radeon_set_power_state fixes
drm/radeon/kms/pm: patch default power state with default clocks/voltages on r6xx+
drm/radeon/kms/pm: enable SetVoltage on r7xx/evergreen
drm/radeon/kms/pm: add support for SetVoltage cmd table (V2)
drm/radeon/kms/evergreen: add initial CS parser
drm/kms: disable/enable poll around switcheroo on/off
drm/nouveau: fixup confusion over which handle the DSM is hanging off.
drm/nouveau: attempt to get bios from ACPI v3
drm/nv50: cast IGP memory location to u64 before shifting
drm/ttm: Fix ttm_page_alloc.c
drm/ttm: Fix cached TTM page allocation.
drm/vmwgfx: Remove some leftover debug messages.
...
Amit Shah [Thu, 27 May 2010 07:54:40 +0000 (13:24 +0530)]
virtio: console: Fix crash when port is unplugged and blocked for write
When a program that has a virtio port opened and blocked for a write
operation, a port hot-unplug event will later led to a crash when
SIGTERM was sent to the program. Fix that.
Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Amit Shah [Thu, 27 May 2010 07:54:39 +0000 (13:24 +0530)]
virtio: console: Fix crash when hot-unplugging a port and read is blocked
When removing a port we don't check if a program was blocked for read.
This leads to a crash when SIGTERM is sent to the program after
hot-unplugging the port.
Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We need at least one S/G element to operate properly, as does the block
layer which increments it to one anyway. We hit this due to a qemu
bug which advertises a sg_elements of 0 under some circumstances.
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (tweaked logic)
Wolfram Sang [Thu, 3 Jun 2010 09:33:58 +0000 (11:33 +0200)]
i2c: Remove all i2c_set_clientdata(client, NULL) in drivers
I2C drivers can use the clientdata-pointer to point to private data. As I2C
devices are not really unregistered, but merely detached from their driver, it
used to be the drivers obligation to clear this pointer during remove() or a
failed probe(). As a couple of drivers forgot to do this, it was agreed that it
was cleaner if the i2c-core does this clearance when appropriate, as there is
no guarantee for the lifetime of the clientdata-pointer after remove() anyhow.
This feature was added to the core with commit e4a7b9b04de15f6b63da5ccdd373ffa3057a3681 to fix the faulty drivers.
As there is no need anymore to clear the clientdata-pointer, remove all current
occurrences in the drivers to simplify the code and prevent confusion.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Richard Purdie <rpurdie@linux.intel.com> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Jean Delvare <khali@linux-fr.org>
Jean Delvare [Thu, 3 Jun 2010 09:33:52 +0000 (11:33 +0200)]
i2c: Check for address validity on client registration
Do basic address validity checks when a client is being registered. We
already had checks in place for devices which are being detected, but
not for devices which are simply instantiated.
This is a very basic check. We don't want to do strict checking here
because some devices are known to infringe the I2C address constraints
(e.g. IR receivers at 7-bit address 0x7a while this value is
supposedly reserved for 10-bit addresses.) So we assume the caller
knows what it is doing.
Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Matthieu Castet <castet.matthieu@free.fr>
Ian Campbell [Tue, 25 May 2010 09:45:35 +0000 (10:45 +0100)]
xen: avoid allocation causing potential swap activity on the resume path
Since the device we are resuming could be the device containing the
swap device we should ensure that the allocation cannot cause
IO.
On resume, this path is triggered when the running system tries to
continue using its devices. If it cannot then the resume will fail;
to try to avoid this we let it dip into the emergency pools.
Ian Campbell [Wed, 19 May 2010 15:19:25 +0000 (16:19 +0100)]
xen: ensure timer tick is resumed even on CPU driving the resume
The core suspend/resume code is run from stop_machine on CPU0 but
parts of the suspend/resume machinery (including xen_arch_resume) are
run on whichever CPU happened to schedule the xenwatch kernel thread.
As part of the non-core resume code xen_arch_resume is called in order
to restart the timer tick on non-boot processors. The boot processor
itself is taken care of by core timekeeping code.
xen_arch_resume uses smp_call_function which does not call the given
function on the current processor. This means that we can end up with
one CPU not receiving timer ticks if the xenwatch thread happened to
be scheduled on CPU > 0.
Use on_each_cpu instead of smp_call_function to ensure the timer tick
is resumed everywhere.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Acked-by: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Stable Kernel <stable@kernel.org> # .32.x
drm/vmwgfx: Allow userspace to change default layout. Bump minor.
The host may change the layout and, since the change is
communicated to the master, the master needs a way to
communicate the change to the kernel driver.
The minor version number is bumped to advertize the
availability of this feature.
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Must set SVGA_NUM_REG_GUEST_DISPLAY before setting up the display information.
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Thu, 27 May 2010 21:01:41 +0000 (17:01 -0400)]
drm/radeon/kms/pm: radeon_set_power_state fixes
- wait for vbl for both profile and dynpm
- unify profile and dynpm code paths more
- call pm_misc before of after clocks to make
sure voltage is changed in the proper order.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Thu, 27 May 2010 21:01:40 +0000 (17:01 -0400)]
drm/radeon/kms/pm: patch default power state with default clocks/voltages on r6xx+
The default power state does not always match the default clocks and voltage
for a particular card. The information in the firmware info table is correct
and should be used in preference to the info the default power state.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes build errors caused by the:
- OF device_node pointer being moved into struct device
- typo in match_table field in the struct device_driver
(which shoud be of_match_table)
Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Grant Likely [Wed, 2 Jun 2010 20:06:09 +0000 (14:06 -0600)]
of/rtc: rtc-mpc5121.c: Fix build failures
Fixes build errors caused by the:
- OF device_node pointer being moved into struct device
- removal of the match_table field from struct of_platform_driver
Signed-off-by: Grant Likely <grant.likely@secretlab.ca> CC: Paul Gortmaker <p_gortmaker@yahoo.com> CC: Alessandro Zummo <a.zummo@towertech.it> CC: Wolfgang Denk <wd@denx.de> CC: Tejun Heo <tj@kernel.org> CC: Anatolij Gustschin <agust@denx.de> CC: rtc-linux@googlegroups.com CC: devicetree-discuss@lists.ozlabs.org
Fixes build errors caused by the:
- OF device_node pointer being moved into struct device
- removal of the match_table field from struct of_platform_driver
Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Fixes build errors caused by the:
- OF device_node pointer being moved into struct device
- removal of the match_table field from struct of_platform_driver
Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Fixes build errors caused by the:
- OF device_node pointer being moved into struct device
- removal of the match_table field from struct of_platform_driver
Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
commit 61c7a080a5a061c976988fd4b844dfb468dda255 ( of: Always use
'struct device.of_node' to get device node pointer.) missed
drivers/watchdog/mpc8xxx_wdt.c. This patch fixes it
Signed-off-by: Michael Guntsche <mike@it-loops.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Grant Likely [Wed, 2 Jun 2010 19:35:02 +0000 (13:35 -0600)]
of/usb: fix build error due to of_node pointer move
Fix driver to use new location of of_node pointer (introduced by commit
use new location of of_node pointer (introduced by commit 61c7a080a5a061c976988fd4b844dfb468dda255; of: Always use 'struct
device.of_node' to get device node pointer)
Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Reported-by: John Linn <john.linn@xilinx.com> CC: Greg Kroah-Hartman <gregkh@suse.de> CC: Alan Stern <stern@rowland.harvard.edu> CC: linux-usb@vger.kernel.org CC: devicetree-discuss@lists.ozlabs.org
Tejun Heo [Sat, 15 May 2010 18:09:34 +0000 (20:09 +0200)]
libata: implement on-demand HPA unlocking
Implement ata_scsi_unlock_native_capacity() which will be called
through SCSI layer when block layer notices that partitions on a
device extend beyond the end of the device. It requests EH to unlock
HPA, waits for completion and returns the current device capacity.
This allows libata to unlock HPA on demand instead of having to decide
whether to unlock upfront. Unlocking on demand is safer than
unlocking by upfront because some BIOSes write private data to the
area beyond HPA limit. This was suggested by Ben Hutchings.
Signed-off-by: Tejun Heo <tj@kernel.org> Suggested-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Tejun Heo [Sat, 15 May 2010 18:09:33 +0000 (20:09 +0200)]
libata: use the enlarged capacity after late HPA unlock
After late HPA unlock, libata kept using the original capacity
ignoring the new larger native capacity. Enlarging device on the fly
doesn't cause any harm. Use the larger native capacity instead. This
will enable on-demand HPA unlocking.
Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Tejun Heo [Sat, 15 May 2010 18:09:32 +0000 (20:09 +0200)]
SCSI: implement sd_unlock_native_capacity()
Implement sd_unlock_native_capacity() method which calls into
hostt->unlock_native_capacity() if implemented. This will be invoked
by block layer if partitions extend beyond the end of the device and
can be used to implement, for example, on-demand ATA host protected
area unlocking.
Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Tejun Heo [Tue, 1 Jun 2010 15:29:21 +0000 (17:29 +0200)]
sata_nv: don't diddle with nIEN on mcp55
On mcp55, nIEN gets stuck once set and liteon blueray rom iHOS104-08
violates ATA specification and fails to set I on D2H Reg FIS if nIEN
is set when the command was issued. When the other party is following
the spec, both devices can work fine but when the two flaws are put
together, they can't talk to each other.
mcp55 has its own IRQ masking mechanism and there's no reason to mess
with nIEN in the first place. Fix it by dropping nIEN diddling from
nv_mcp55_freeze/thaw().
This was originally reported by Cengiz. Although Cengiz hasn't
verified the fix yet, I could reproduce this problem and verfiy the
fix. Even if Cengiz is experiencing different or additional problems,
this patch is needed.
Tejun Heo [Mon, 31 May 2010 14:26:48 +0000 (16:26 +0200)]
sata_via: magic vt6421 fix for transmission problems w/ WD drives
vt6421 has problems talking to recent WD drives. It causes a lot of
transmission errors while high bandwidth transfer as reported in the
following bugzilla entry.
https://bugzilla.kernel.org/show_bug.cgi?id=15173
Joseph Chan provided the following fix. I don't have any idea what it
does but I can verify the issue is gone with the patch applied.
Signed-off-by: Tejun Heo <tj@kernel.org>
Originally-from: Joseph Chan <JosephChan@via.com.tw> Reported-by: Jorrit Tijben <sjorrit@gmail.com> Cc: stable@kernel.org Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
powerpc/macio: Fix probing of macio devices by using the right of match table
Grant patches added an of mach table to struct device_driver. However,
while he changed the macio device code to use that, he left the match
table pointer in struct macio_driver and didn't update drivers to use
the "new" one, thus breaking the probing.
This completes the change by moving all drivers to setup the "new"
one, removing all traces of the old one, and while at it (since it
changes the exact same locations), I also remove two other duplicates
from struct driver which are the name and owner fields.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Paul Mackerras [Tue, 1 Jun 2010 19:33:08 +0000 (19:33 +0000)]
agp/uninorth: Fix oops caused by flushing too much
This fixes a sporadic oops at boot on G5 Power Macs. The table_end
variable has the address of the last byte of the table. Adding on
PAGE_SIZE means we flush too much, and if the page after the table
is not mapped for any reason, the kernel will oops. Instead we add
on 1 because flush_dcache_range() interprets its second argument as
the first byte past the range to be flushed.
Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
powerpc/kprobes: Remove resume_execution() in kprobes
emulate_step() in kprobe_handler() would've already determined if the
probed instruction can be emulated. We single-step in hardware only if
the instruction couldn't be emulated. resume_execution() therefore is
superfluous -- all we need is to fix up the instruction pointer after
single-stepping.
Thanks to Paul Mackerras for catching this.
Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Linus Torvalds [Tue, 1 Jun 2010 21:13:14 +0000 (14:13 -0700)]
Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
powerpc: Don't export cvt_fd & _df when CONFIG_PPC_FPU is not set
powerpc/44x: icon: select SM502 and frame buffer console support
powerpc/85xx: Add P1021MDS board support
powerpc/85xx: Change MPC8572DS camp dtses for MSI sharing
powerpc/fsl_msi: add removal path and probe failing path
powerpc/fsl_msi: enable msi sharing through AMP OSes
powerpc/fsl_msi: enable msi allocation in all banks
powerpc/fsl_msi: fix the conflict of virt_msir's chip_data
powerpc/fsl_msi: Add multiple MSI bank support
powerpc/kexec: Add support for FSL-BookE
powerpc/fsl-booke: Move the entry setup code into a seperate file
powerpc/fsl-booke: fix the case where we are not in the first page
powerpc/85xx: Enable support for ports 3 and 4 on 8548 CDS
powerpc/fsl-booke: Add hibernation support for FSL BookE processors
powerpc/e500mc: Implement machine check handler.
powerpc/44x: Add basic ICON PPC440SPe board support
powerpc/44x: Fix UART clocks on 440SPe
powerpc/44x: Add reset-type to katmai.dts
powerpc/44x: Adding PCI-E support for PowerPC 460SX based SOC.
Linus Torvalds [Tue, 1 Jun 2010 21:12:27 +0000 (14:12 -0700)]
Merge branch 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel
* 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: (41 commits)
drm/i915: add HAS_BSD check to i915_getparam
drm/i915: Honor sync polarity from VBT panel timing descriptors
drm/i915: Unmask interrupt for render engine on Sandybridge
drm/i915: Fix PIPE_CONTROL command on Sandybridge
drm/i915: Fix up address spaces in slow_kernel_write()
drm/i915: Use non-atomic kmap for slow copy paths
drm/i915: Avoid moving from CPU domain during pwrite
drm/i915: Cleanup after failed initialization of ringbuffers
drm/i915: Reject bind_to_gtt() early if object > aperture
drm/i915: Check error code whilst moving buffer to GTT domain.
drm/i915: Remove spurious warning "Failure to install fence"
drm/i915: Rebind bo if currently bound with incorrect alignment.
drm/i915: Include pitch in set_base debug statement.
drm/i915: Only print "nothing to do" debug message as required.
drm/i915: Propagate error from unbinding an unfenceable object.
drm/i915: Avoid nesting of domain changes when setting display plane
drm/i915: Hold the spinlock whilst resetting unpin_work along error path
drm/i915: Only print an message if there was an error
drm/i915: Clean up leftover bits from hws move to ring structure.
drm/i915: Add CxSR support on Pineview DDR3
...
Dan Carpenter [Tue, 1 Jun 2010 19:58:22 +0000 (20:58 +0100)]
FS-Cache: Remove unneeded null checks
fscache_write_op() makes unnecessary checks of the page variable to see if it
is NULL. It can't be NULL at those points as the kernel would already have
crashed a little higher up where we examined page->index.
Furthermore, unless radix_tree_gang_lookup_tag() can return 1 but no page, a
NULL pointer crash should not be encountered there as we can only get there if
r_t_g_l_t() returned 1.
Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When we use plain 'perf buildid-list' we use only what is in the buildid
table in the perf.data header. And those have absolute pathnames because
at 'perf record' time we used __perf_session__process_events and that
doesn't sets up the path shortening code in map__new() that happens if
symbol_conf.full_paths is false, the default.
On the other hand, when we use 'perf buildid-list --with-hits' we
process all the events using perf_session__process_events, adding
entries to the global DSO list _after_ removing the current directory
from the DSO name, for presentation purposes.
Because of that we end up having two entries in the DSO list when
recording events for binaries using relative pathnames.
Fix it minimally by setting symbol_conf.full_paths to true when marking
the DSOs with hits in 'perf buildid-list --with-hits', as used by 'perf
archive'
Right fix longer term is to shorten the path only at presentation time.
Will be done for 2.6.36.
Reported-by: Stephane Eranian <eranian@google.com> Tested-by: Stephane Eranian <eranian@google.com> Cc: David S. Miller <davem@davemloft.net> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <20100601183837.GC4093@ghostprotocols.net> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jeff Layton [Tue, 1 Jun 2010 14:54:45 +0000 (10:54 -0400)]
cifs: fix page refcount leak
Commit 315e995c63a15cb4d4efdbfd70fe2db191917f7a is causing OOM kills
when stress-testing a CIFS filesystem. The VFS readpages operation takes
a page reference. The older code just handed this reference off to the
page cache, but the new code takes an extra one. The simplest fix is to
put the new reference after add_to_page_cache_lru.
Signed-off-by: Jeff Layton <jlayton@redhat.com> Acked-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Steve French <sfrench@us.ibm.com>
Denis Kirjanov [Tue, 1 Jun 2010 16:15:39 +0000 (17:15 +0100)]
AFS: Fix possible null pointer dereference in afs_alloc_server()
Fix a possible null pointer dereference in afs_alloc_server(): the server
pointer is NULL if there was an allocation failure, and under such a
condition, we can't dereference it in the _leave() statement.
In commit e9fb7631ebcd ("cpu-hotplug: introduce cpu_notify(),
__cpu_notify(), cpu_notify_nofail()") the new helper functions access
cpu_chain. As a result, it shouldn't be marked __cpuinitdata (via
section mismatch warning).
Alternatively, the helper functions should be forced inline, or marked
__ref or __cpuinit. In the meantime, this patch silences the warning
the trivial way.
Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Tue, 1 Jun 2010 15:55:52 +0000 (08:55 -0700)]
Merge branch 'for-35' of git://repo.or.cz/linux-kbuild
* 'for-35' of git://repo.or.cz/linux-kbuild: (81 commits)
kbuild: Revert part of e8d400a to resolve a conflict
kbuild: Fix checking of scm-identifier variable
gconfig: add support to show hidden options that have prompts
menuconfig: add support to show hidden options which have prompts
gconfig: remove show_debug option
gconfig: remove dbg_print_ptype() and dbg_print_stype()
kconfig: fix zconfdump()
kconfig: some small fixes
add random binaries to .gitignore
kbuild: Include gen_initramfs_list.sh and the file list in the .d file
kconfig: recalc symbol value before showing search results
.gitignore: ignore *.lzo files
headerdep: perlcritic warning
scripts/Makefile.lib: Align the output of LZO
kbuild: Generate modules.builtin in make modules_install
Revert "kbuild: specify absolute paths for cscope"
kbuild: Do not unnecessarily regenerate modules.builtin
headers_install: use local file handles
headers_check: fix perl warnings
export_report: fix perl warnings
...
Linus Torvalds [Tue, 1 Jun 2010 15:51:25 +0000 (08:51 -0700)]
Merge branch 'for-linus' of git://www.jni.nu/cris
* 'for-linus' of git://www.jni.nu/cris:
CRIS: Don't use mask_irq as symbol name
CRIS: Simplify param.h by simply including <asm-generic/param.h>
CRISv10: Whitespace fixes for hw_settings.S
CRISv10: Trivial fixes.
CRISv32: Fix RS485 port 4 CD Kconfig item.
CRISv32: Remove duplicated Kconfig items.
cris: push down BKL into some device drivers
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (28 commits)
drivers/isdn/hardware/mISDN: Use GFP_ATOMIC when a lock is held
ksz884x: Add missing validate_addr hook
ksz884x: convert to netdev_tx_t
virtio-net: pass gfp to add_buf
be2net: convert hdr.timeout in be_cmd_loopback_test() to le32
can: mpc5xxx_can.c: Fix build failure
net/ipv4/tcp_input.c: fix compilation breakage when FASTRETRANS_DEBUG > 1
net: sock_queue_err_skb() dont mess with sk_forward_alloc
netfilter: xtables: stackptr should be percpu
netfilter: don't xt_jumpstack_alloc twice in xt_register_table
greth: Fix build after OF device conversions.
net: fix sk_forward_alloc corruptions
Phonet: listening socket lock protects the connected socket list
caif: unlock on error path in cfserl_receive()
be2net: remove superfluous externs
be2net: add unlock on error path
net/rds: Add missing mutex_unlock
drivers/isdn/hardware/mISDN: Add missing spin_unlock
fs_enet: Adjust BDs after tx error
skb: make skb_recycle_check() return a bool value
...
clear_user() returns the number of bytes that could not be copied rather than
an error code. So we should return -EFAULT rather than directly returning the
results.
Without this patch, positive values may be returned to elf_fdpic_map_file()
and the following error handlings do not function as expected.
1.
ret = elf_fdpic_map_file_constdisp_on_uclinux(params, file, mm);
if (ret < 0)
return ret;
2.
ret = elf_fdpic_map_file_by_direct_mmap(params, file, mm);
if (ret < 0)
return ret;
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp> Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Mike Frysinger <vapier@gentoo.org> CC: Alexander Viro <viro@zeniv.linux.org.uk> CC: Andrew Morton <akpm@linux-foundation.org> CC: Daisuke HATAYAMA <d.hatayama@jp.fujitsu.com> CC: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
hist_entry__annotate() runs objdump with -S option so the output may contain
lines of any format. If a line starts with a colon strtoull() returns 0 and
calculated offset will be negative. This causes perf annotate segfaults.
Make sure that strtoull() has parsed at least one digit.
Cc: David S. Miller <davem@davemloft.net> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission> Signed-off-by: Konstantin Stepanyuk <konstantin.stepanyuk@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Joerg Roedel [Mon, 31 May 2010 13:05:20 +0000 (15:05 +0200)]
x86/amd-iommu: Fall back to GART if initialization fails
This patch implements a fallback to the GART IOMMU if this
is possible and the AMD IOMMU initialization failed.
Otherwise the fallback would be nommu which is very
problematic on machines with more than 4GB of memory or
swiotlb which hurts io-performance.
Joerg Roedel [Fri, 28 May 2010 12:26:48 +0000 (14:26 +0200)]
x86/amd-iommu: Fix crash when request_mem_region fails
When request_mem_region fails the error path tries to
disable the IOMMUs. This accesses the mmio-region which was
not allocated leading to a kernel crash. This patch fixes
the issue.
For CONFIG_PREEMPT=y kernels the sched_switch(.prev_state) argument isn't
useful because we can get preempted with current->state != TASK_RUNNING
without actually getting removed from the runqueue.
Cure this by treating all preempted tasks as runnable from the tracer's
point of view.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cautiously-acked-by: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1275322715.27810.23323.camel@twins> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Peter Zijlstra [Mon, 31 May 2010 10:37:30 +0000 (12:37 +0200)]
sched: Fix wake_affine() vs RT tasks
Mike reports that since e9e9250b (sched: Scale down cpu_power due to RT
tasks), wake_affine() goes funny on RT tasks due to them still having a
!0 weight and wake_affine() still subtracts that from the rq weight.
Since nobody should be using se->weight for RT tasks, set the value to
zero. Also, since we now use ->cpu_power to normalize rq weights to
account for RT cpu usage, add that factor into the imbalance computation.
Reported-by: Mike Galbraith <efault@gmx.de> Tested-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1275316109.27810.22969.camel@twins> Signed-off-by: Ingo Molnar <mingo@elte.hu>
projects / karo-tx-linux.git / log