Rusty Russell [Thu, 16 Dec 2010 23:03:15 +0000 (17:03 -0600)]
lguest: populate initial_page_table
Two x86 patches broke lguest:
1) v2.6.35-492-g72d7c3b, which changed x86 to use the memblock allocator.
In lguest, the host places linear page tables at the top of mem, which
used to be enough to get us up to the swapper_pg_dir page tables. With
the first patch, the direct mapping tables used that memory:
Before: kernel direct mapping tables up to 4000000 @ 7000-1a000
After: kernel direct mapping tables up to 4000000 @ 3fed000-4000000
I initially fixed this by lying about the amount of memory we had, so
the kernel wouldn't blatt the lguest boot pagetables (yuk!), but then...
This was initialized in a part of head_32.S which isn't executed by
lguest; it is then copied into swapper_pg_dir. So we have to initialize
it; and anyway we switch to it before we blatt the old tables, so that
fixes the previous damage as well.
For the moment, I cut & pasted the code into lguest's boot code, but
next merge window I will merge them.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
To: x86@kernel.org
Rusty Russell [Thu, 16 Dec 2010 23:03:15 +0000 (17:03 -0600)]
lguest: restore boot speed
lguest is dumb and drops *all* the pagetables for set_pte (which is
only used for kernel mapping manipulation, so it's OK without highmem).
But it's used a lot in boot, too. As a guest optimization, we
suppressed this flushing until the first page switch. Now we have
initial_page_table, that happens much earlier, so extend the heuristic
to wait until we switch to something other than the swapper_pg_dir or
initial_page_table.
As measured on my laptop under kvm, this dropped the time-to-mount-root
from 48 seconds to 4.3 seconds.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rusty Russell [Thu, 16 Dec 2010 23:03:13 +0000 (17:03 -0600)]
lguest: fix crash lguest_time_init
fe25c7fc2e "x86: lguest: Convert to new irq chip functions" converted
enable_lguest_irq() to take a struct irq_data *, but didn't fix the one
internal caller.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
To: x86@kernel.org
Linus Torvalds [Wed, 15 Dec 2010 20:41:17 +0000 (12:41 -0800)]
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix typo which broke '..' detection in ext4_find_entry()
ext4: Turn off multiple page-io submission by default
The install_special_mapping routine (used, for example, to setup the
vdso) skips the security check before insert_vm_struct, allowing a local
attacker to bypass the mmap_min_addr security restriction by limiting
the available pages for special mappings.
bprm_mm_init() also skips the check, and although I don't think this can
be used to bypass any restrictions, I don't see any reason not to have
the security check.
arch/x86/crypto/ghash-clmulni-intel_glue.c:256: error: implicit declaration of function 'IS_ERR'
arch/x86/crypto/ghash-clmulni-intel_glue.c:257: error: implicit declaration of function 'PTR_ERR'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Linus Torvalds [Wed, 15 Dec 2010 02:50:10 +0000 (18:50 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: It is likely that WORKER_NOT_RUNNING is true
MAINTAINERS: Add workqueue entry
workqueue: check the allocation of system_unbound_wq
Linus Torvalds [Wed, 15 Dec 2010 02:49:40 +0000 (18:49 -0800)]
Merge branch 'for-linus' of git://neil.brown.name/md
* 'for-linus' of git://neil.brown.name/md:
md: protect against NULL reference when waiting to start a raid10.
md: fix bug with re-adding of partially recovered device.
md: fix possible deadlock in handling flush requests.
md: move code in to submit_flushes.
md: remove handling of flush_pending in md_submit_flush_data
Major Lee [Fri, 10 Dec 2010 10:13:49 +0000 (10:13 +0000)]
dw_spi: Fix missing final read in some polling situations
There is a possibility that the last word of a transaction will be lost
if data is not ready. Re-read in poll_transfer() to solve this issue
when poll_mode is enabled.
Verified on SPI touch screen device.
Signed-off-by: Major Lee <major_lee@wistron.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Cox [Tue, 14 Dec 2010 15:29:08 +0000 (15:29 +0000)]
i2c_intel_mid: Fix slash in sysfs name
This gets caught by the new sanity check code. Instead of the slash use a
different symbol. This was originally found by Major Lee who proposed a
rather more complex patch which changed the name according to the chip
type.
On the basis that we are in a late -rc and making Linus grumpy isn't always
a good idea (however fun) this is a simple alternative.
Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Wed, 15 Dec 2010 01:36:10 +0000 (17:36 -0800)]
Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm:
ARM: 6535/1: V6 MPCore v6_dma_inv_range and v6_dma_flush_range RWFO fix
ARM: 6534/1: Make CONFIG_FPE_NWFPE depend on !CONFIG_THUMB2_KERNEL
ARM: 6533/1: Thumb-2: Make CONFIG_THUMB2_KERNEL depend on !CPU_V6
Change bcmring Maintainer list.
ARM: Update mach-types
ARM: 6528/1: Use CTR for the I-cache line size on ARMv7
ARM: 6527/1: Use CTR instead of CCSIDR for the D-cache line size on ARMv7
ARM: pxa/palm: fix ifdef around gen_nand driver registration
ARM: pxa: fix pxa2xx-flash section mismatch
ARM: mmp2: remove not used clk_rtc
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
sparc: Write to prom console using indirect buffer.
sparc: Delete prom_*getchar().
sparc: Pass buffer pointer all the way down to prom_{get,put}char().
sparc: Do not export prom_nb{get,put}char().
sparc64: Delete prom_setcallback().
sparc64: Unexport prom_service_exists().
sparc: Kill prom devops_{32,64}.c
sparc: Remove prom_pathtoinode()
sparc64: Delete prom_puts() unused.
SPARC/LEON: removed constant timer initialization as if HZ=100, now it reflects the value of HZ
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (75 commits)
pppoe.c: Fix kernel panic caused by __pppoe_xmit
WAN: Fix a TX IRQ causing BUG() in PC300 and PCI200SYN drivers.
bnx2x: Advance a version number to 1.60.01-0
bnx2x: Fixed a compilation warning
bnx2x: LSO code was broken on BE platforms
qlge: Fix deadlock when cancelling worker.
net: fix skb_defer_rx_timestamp()
cxgb4vf: Ingress Queue Entry Size needs to be 64 bytes
phy: add the IC+ IP1001 driver
atm: correct sysfs 'device' link creation and parent relationships
MAINTAINERS: remove me from tulip
SCTP: Fix SCTP_SET_PEER_PRIMARY_ADDR to accpet v4mapped address
enic: Bug Fix: Pass napi reference to the isr that services receive queue
ipv6: fix nl group when advertising a new link
connector: add module alias
net: Document the kernel_recvmsg() function
r8169: Fix runtime power management
hso: IP checksuming doesn't work on GE0301 option cards
xfrm: Fix xfrm_state_migrate leak
net: Convert netpoll blocking api in bonding driver to be a counter
...
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
[SCSI] hpsa: fix redefinition of PCI_DEVICE_ID_CISSF
[SCSI] qla2xxx: Update version number to 8.03.05-k0.
[SCSI] qla2xxx: Properly set the return value in qla2xxx_eh_abort function.
[SCSI] qla2xxx: Correct issue where NPIV-config data was not being allocated for 82xx parts.
[SCSI] qla2xxx: Change MSI initialization from using incorrect request_irq parameter.
[SCSI] qla2xxx: Populate Command Type 6 LUN field properly.
[SCSI] zfcp: Issue FCP command without holding SCSI host_lock
[SCSI] zfcp: Prevent usage w/o holding a reference
[SCSI] zfcp: No ERP escalation on gpn_ft eval
[SCSI] zfcp: Correct false abort data assignment.
[SCSI] zfcp: Fix common FCP request reception
[SCSI] Eliminate error handler overload of the SCSI serial number
[SCSI] pmcraid: disable msix and expand device config entry
[SCSI] bsg: correct fault if queue object removed while dev_t open
[SCSI] osd: checking NULL instead of ERR_PTR()
Linus Torvalds [Tue, 14 Dec 2010 22:35:04 +0000 (14:35 -0800)]
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:
kgdboc,input: Fix regression with keyboard release key and early debugging
Linus Torvalds [Tue, 14 Dec 2010 22:33:33 +0000 (14:33 -0800)]
Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
ACPI / PM: Do not save/restore NVS on Sony Vaio VGN-NW130D
ACPI/HEST: adjust section selection
ACPI: eliminate unused variable warning for !ACPI_SLEEP
ACPI/PNP: avoid section mismatch warning
ACPI thermal: remove two unused functions
ACPI: fix a section mismatch
ACPI, APEI, use raw spinlock in ERST
ACPI: video: fix build for CONFIG_ACPI=n
ACPI: video: fix build for VIDEO_OUTPUT_CONTROL=n
ACPI: fix allowing to add/remove multiple _OSI strings
acpi: fix _OSI string setup regression
ACPI: EC: Add another dmi match entry for MSI hardware
ACPI battery: update status upon sysfs query
ACPI ac: update AC status upon sysfs query
ACPI / PM: Do not refcount power resources that can't be turned on
ACPI / PM: Check device state before refcounting power resources
ARM: 6535/1: V6 MPCore v6_dma_inv_range and v6_dma_flush_range RWFO fix
Cache ownership must be acquired by reading/writing data from the
cache line to make cache operation have the desired effect on the
SMP MPCore CPU. However, the ownership is never acquired in the
v6_dma_inv_range function when cleaning the first line and
flushing the last one, in case the address is not aligned
to D_CACHE_LINE_SIZE boundary.
Fix this by reading/writing data if needed, before performing
cache operations.
While at it, fix v6_dma_flush_range to prevent RWFO outside
the buffer.
Cc: stable@kernel.org Signed-off-by: Valentine Barshak <vbarshak@mvista.com> Signed-off-by: George G. Davis <gdavis@mvista.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Dave Martin [Mon, 13 Dec 2010 20:56:03 +0000 (21:56 +0100)]
ARM: 6534/1: Make CONFIG_FPE_NWFPE depend on !CONFIG_THUMB2_KERNEL
Because the nwfpe support is unlikely to be used on new platforms
and requires CONFIG_OABI_COMPAT, which is not generally used with
ARMv7+, we shouldn't expect to build nwfpe support into a Thumb-2
kernel.
At present, nwfpe contains assembly code which isn't Thumb-2
compatible, and for now it doesn't appear useful to port this
code.
All ARMv7-A/R platforms necessarily have VFPv3 hardware floating-
point natively, making emulation unnecessary.
Signed-off-by: Dave Martin <dave.martin@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Dave Martin [Mon, 13 Dec 2010 20:53:53 +0000 (21:53 +0100)]
ARM: 6533/1: Thumb-2: Make CONFIG_THUMB2_KERNEL depend on !CPU_V6
This makes sense, because Thumb-2 code can't execute on plain
ARMv6 processors.
This will avoid accidentally configuring a broken kernel where the
config otherwise would allow multiple architecture versions to
coexist in the same kernel.
Not adding !CPU_V5 etc., because the chance of anyone trying to
put v5 and v7 in the same kernel is low, and I'm not aware of
any mach which can do this. These could be added later if it
matters.
Note that the rules may need to be refined if support for the
ARM1156J(F)-S processor is later added to the kernel, since this
processor supports the rare ARMv6T2 extensions, which add support
for Thumb-2 and a few other ARMv7 features.
Signed-off-by: Dave Martin <dave.martin@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Jiandong Zheng [Tue, 14 Dec 2010 21:55:49 +0000 (21:55 +0000)]
Change bcmring Maintainer list.
I am Jiandong Zheng working on BCMRING in Broadcom Canada Ltd. I am
replacing Leo Chen (leochen@broadcom.com) as "ARM/BCMRING ARM
ARCHITECTURE" and "ARM/BCMRING MTD NAND DRIVER" maintainer from
Broadcom as he is no longer the maintainer of these components.
Signed-off-by: Jiandong Zheng <jdzheng@broadcom.com> Acked-by: Scott Branden <sbranden@broadcom.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Linus Torvalds [Tue, 14 Dec 2010 21:33:21 +0000 (13:33 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6:
regulator: tps6586x: correct register table
regulator: tps6586x: Handle both enable reg/bits being the same
regulator: tps6586x: Fix TPS6586X_DVM to store goreg/bit
regulator: tps6586x: Add missing bit mask generation
Linus Torvalds [Tue, 14 Dec 2010 21:32:40 +0000 (13:32 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
ALSA: HDA: Quirk for Dell Vostro 320 to make microphone work
ALSA: hda - Reset sample sizes and max bitrates when reading ELD
ALSA: hda - Always allow basic audio irrespective of ELD info
ALSA: hda - Do not wrongly restrict min_channels based on ELD
ASoC: Correct WM8962 interrupt mask register read
ASoC: WM8580: Debug BCLK and sample size
ASoC: Fix resource leak if soc_register_ac97_dai_link failed
ASoC: Hold client_mutex while calling snd_soc_instantiate_cards()
ASoC: Fix swap of left and right channels for WM8993/4 speaker boost gain
ASoC: Fix off by one error in WM8994 EQ register bank size
ALSA: hda: Use position_fix=1 for Acer Aspire 5538 to enable capture on internal mic
ALSA: hda - Enable jack sense for Thinkpad Edge 13
ALSA: hda - Fix ThinkPad T410[s] docking station line-out
ALSA: hda: Use model=lg quirk for LG P1 Express to enable playback and capture
Linus Torvalds [Tue, 14 Dec 2010 21:31:49 +0000 (13:31 -0800)]
Merge branch 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
drm/radeon/kms: don't apply 7xx HDP flush workaround on AGP
drm: use after free in drm_queue_vblank_event()
drm/kms: remove spaces from connector names (v2)
Linus Torvalds [Tue, 14 Dec 2010 21:31:23 +0000 (13:31 -0800)]
Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
hwmon: (adm1026) Allow 1 as a valid divider value
hwmon: (adm1026) Fix setting fan_div
hwmon: (it87) Fix manual fan speed control on IT8721F
Theodore Ts'o [Tue, 14 Dec 2010 20:27:50 +0000 (15:27 -0500)]
ext4: Turn off multiple page-io submission by default
Jon Nelson has found a test case which causes postgresql to fail with
the error:
psql:t.sql:4: ERROR: invalid page header in block 38269 of relation base/16384/16581
Under memory pressure, it looks like part of a file can end up getting
replaced by zero's. Until we can figure out the cause, we'll roll
back the change and use block_write_full_page() instead of
ext4_bio_write_page(). The new, more efficient writing function can
be used via the mount option mblk_io_submit, so we can test and fix
the new page I/O code.
To reproduce the problem, install postgres 8.4 or 9.0, and pin enough
memory such that the system just at the end of triggering writeback
before running the following sql script:
begin;
create temporary table foo as select x as a, ARRAY[x] as b FROM
generate_series(1, 10000000 ) AS x;
create index foo_a_idx on foo (a);
create index foo_b_idx on foo USING GIN (b);
rollback;
If the temporary table is created on a hard drive partition which is
encrypted using dm_crypt, then under memory pressure, approximately
30-40% of the time, pgsql will issue the above failure.
This patch should fix this problem, and the problem will come back if
the file system is mounted with the mblk_io_submit mount option.
Reported-by: Jon Nelson <jnelson@jamponi.net> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Linus Torvalds [Tue, 14 Dec 2010 19:09:05 +0000 (11:09 -0800)]
Merge branch 'for-2.6.37' of git://linux-nfs.org/~bfields/linux
* 'for-2.6.37' of git://linux-nfs.org/~bfields/linux:
nfsd: Fix possible BUG_ON firing in set_change_info
sunrpc: prevent use-after-free on clearing XPT_BUSY
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
Btrfs: prevent RAID level downgrades when space is low
Btrfs: account for missing devices in RAID allocation profiles
Btrfs: EIO when we fail to read tree roots
Btrfs: fix compiler warnings
Btrfs: Make async snapshot ioctl more generic
Btrfs: pwrite blocked when writing from the mmaped buffer of the same page
Btrfs: Fix a crash when mounting a subvolume
Btrfs: fix sync subvol/snapshot creation
Btrfs: Fix page leak in compressed writeback path
Btrfs: do not BUG if we fail to remove the orphan item for dead snapshots
Btrfs: fixup return code for btrfs_del_orphan_item
Btrfs: do not do fast caching if we are allocating blocks for tree_root
Btrfs: deal with space cache errors better
Btrfs: fix use after free in O_DIRECT
Linus Torvalds [Tue, 14 Dec 2010 19:02:15 +0000 (11:02 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
ceph: fix ioctl magic
ceph: Behave better when handling file lock replies.
ceph: pass lock information by struct file_lock instead of as individual params.
ceph: Handle file locks in replies from the MDS.
ceph: avoid possible null deref in readdir after dir llseek
Linus Torvalds [Tue, 14 Dec 2010 16:51:12 +0000 (08:51 -0800)]
Merge branch 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6
* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
NFS: Fix panic after nfs_umount()
nfs: remove extraneous and problematic calls to nfs_clear_request
nfs: kernel should return EPROTONOSUPPORT when not support NFSv4
NFS: Fix fcntl F_GETLK not reporting some conflicts
nfs: Discard ACL cache on mode update
NFS: Readdir cleanups
NFS: nfs_readdir_search_for_cookie() don't mark as eof if cookie not found
NFS: Fix a memory leak in nfs_readdir
Call the filesystem back whenever a page is removed from the page cache
NFS: Ensure we use the correct cookie in nfs_readdir_xdr_filler
Steven Rostedt [Sat, 4 Dec 2010 04:12:33 +0000 (23:12 -0500)]
workqueue: It is likely that WORKER_NOT_RUNNING is true
Running the annotate branch profiler on three boxes, including my
main box that runs firefox, evolution, xchat, and is part of the distcc farm,
showed this with the likelys in the workqueue code:
The likely()s in this case were assuming that WORKER_NOT_RUNNING will
most likely be false. But this is not the case. The reason is
(and shown by adding trace_printks and testing it) that most of the time
WORKER_PREP is set.
In worker_thread() we have:
worker_clr_flags(worker, WORKER_PREP);
[ do work stuff ]
worker_set_flags(worker, WORKER_PREP, false);
(that 'false' means not to wake up an idle worker)
The wq_worker_sleeping() is called from schedule when a worker thread
is putting itself to sleep. Which happens most of the time outside
of that [ do work stuff ].
The wq_worker_waking_up is called by the wakeup worker code, which
is also callod outside that [ do work stuff ].
Thus, the likely and unlikely used by those two functions are actually
backwards.
Refresh rate nearness is not calculated or reset when nearest resolution
changes.
This patch resets the refresh rate differential measurement whenever a
new nearest resolution is discovered. This fixes two error cases;
first, wherein the first mode's refresh rate differential is never
calculated and second, when the closest refresh rate from a previous
nearest resolution is erroneously preserved.
Signed-off-by: Andrew Kephart <andrew.kephart@alereon.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Nicolas Ferre [Mon, 13 Dec 2010 12:48:41 +0000 (13:48 +0100)]
dmaengine: at_hdmac: fix buffer transfer size specification
Buffer transfer size is the number of transfers to be performed in
relation with the width of the _source_ interface.
So in the DMA_FROM_DEVICE case, it should be the register width that
should be taken into account.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Jason Wessel [Wed, 1 Dec 2010 19:01:01 +0000 (13:01 -0600)]
kgdboc,input: Fix regression with keyboard release key and early debugging
The commit 111c182340cd22e238ab1cc6564df336c6ebd7cb (kgdboc: reset
input devices (keyboards) when exiting debugger) introduced a
regression in early debugging such that you get a kernel oops on
continue (with the go command) if you boot a kernel with:
earlyprintk=vga ekgdboc=kbd kgdbwait
The restore kgdboc_restore_input() routine schedules work for the
purpose of sending key release events for any keys that were in the
depressed state prior to entering the kernel debugger. A simple fix
to the crash is to not invoke the schedule_work() if the kernel
system_state is anything other than SYSTEM_RUNNING.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Sergei Shtylyov <sshtylyov@mvista.com>
ACPI / PM: Do not save/restore NVS on Sony Vaio VGN-NW130D
The saving of the NVS memory area during suspend and restoring it
during resume causes problems to appear on Sony Vaio VGN-NW130D, so
blacklist that machine to avoid those problems.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reported-and-tested-by: Adriano <adriano.vilela@yahoo.com> Signed-off-by: Len Brown <len.brown@intel.com>
Chris Mason [Mon, 13 Dec 2010 20:06:46 +0000 (15:06 -0500)]
Btrfs: prevent RAID level downgrades when space is low
The extent allocator has code that allows us to fill
allocations from any available block group, even if it doesn't
match the raid level we've requested.
This was put in because adding a new drive to a filesystem
made with the default mkfs options actually upgrades the metadata from
single spindle dup to full RAID1.
But, the code also allows us to allocate from a raid0 chunk when we
really want a raid1 or raid10 chunk. This can cause big trouble because
mkfs creates a small (4MB) raid0 chunk for data and metadata which then
goes unused for raid1/raid10 installs.
The allocator will happily wander in and allocate from that chunk when
things get tight, which is not correct.
The fix here is to make sure that we provide duplication when the
caller has asked for it. It does all the dups to be any raid level,
which preserves the dup->raid1 upgrade abilities.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Chris Mason [Mon, 13 Dec 2010 19:56:23 +0000 (14:56 -0500)]
Btrfs: account for missing devices in RAID allocation profiles
When we mount in RAID degraded mode without adding a new device to
replace the failed one, we can end up using the wrong RAID flags for
allocations.
This results in strange combinations of block groups (raid1 in a raid10
filesystem) and corruptions when we try to allocate blocks from single
spindle chunks on drives that are actually missing.
The first device has two small 4MB chunks in it that mkfs creates and
these are usually unused in a raid1 or raid10 setup. But, in -o degraded,
the allocator will fall back to these because the mask of desired raid groups
isn't correct.
The fix here is to count the missing devices as we build up the list
of devices in the system. This count is used when picking the
raid level to make sure we continue using the same levels that were
in place before we lost a drive.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Chris Mason [Mon, 13 Dec 2010 19:47:58 +0000 (14:47 -0500)]
Btrfs: EIO when we fail to read tree roots
If we just get a plain IO error when we read tree roots, the code
wasn't properly sending that error up the chain. This allowed mounts to
continue when they should failed, and allowed operations
on partially setup root structs. The end result was usually oopsen
on spinlocks that hadn't been spun up correctly.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Ira W. Snyder [Mon, 13 Dec 2010 16:42:30 +0000 (11:42 -0500)]
hwmon: (ltc4215) make sysfs file match the alarm cause
The ltc4215 driver used the chip's "power good" status bit to provide
the power1_alarm file. This is wrong: the chip is really reporting the
status of one of the monitored voltages.
Change the sysfs file from power1_alarm to in2_min_alarm instead. This
matches the voltage that the chip is raising an alarm for.
Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Paul Mundt [Mon, 13 Dec 2010 05:59:51 +0000 (14:59 +0900)]
sh: Enable deprecated IRQ chip APIs for MFD and GPIOLIB drivers.
There are still quite a number of MFD and GPIO expander drivers that are
using the old irq_chip APIs that haven't had a chance to update during
the .37 cycle, resulting in allyes/modconfig errors on some
configurations.
Mark Brown has done most of the legwork to get these fixed up in .38,
so this should just be a .37 stop-gap that we can drop at the end of the
.38 merge window.
Reported-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Catalin Marinas [Tue, 7 Dec 2010 15:56:29 +0000 (16:56 +0100)]
ARM: 6528/1: Use CTR for the I-cache line size on ARMv7
The current implementation of the v7_coherent_*_range function assumes
that the D and I cache lines have the same size, which is incorrect
architecturally. This patch adds the icache_line_size macro which reads
the CTR register. The main loop in v7_coherent_*_range is split in two
independent loops or the D and I caches. This also has the performance
advantage that the DSB is moved outside the main loop.
Reported-by: Kevin Sapp <ksapp@quicinc.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Catalin Marinas [Tue, 7 Dec 2010 15:52:04 +0000 (16:52 +0100)]
ARM: 6527/1: Use CTR instead of CCSIDR for the D-cache line size on ARMv7
The current implementation of the dcache_line_size macro reads the L1
cache size from the CCSIDR register. This, however, is not guaranteed to
be the smallest cache line in the cache hierarchy. The patch changes to
the macro to use the more architecturally correct CTR register.
Reported-by: Kevin Sapp <ksapp@quicinc.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Andrej Ota [Sun, 12 Dec 2010 23:06:16 +0000 (15:06 -0800)]
pppoe.c: Fix kernel panic caused by __pppoe_xmit
__pppoe_xmit function return value was invalid resulting in
additional call to kfree_skb on already freed skb. This resulted in
memory corruption and consequent kernel panic after PPPoE peer
terminated the link.
Reported-by: Gorik Van Steenberge <gvs@zemos.net> Reported-by: Daniel Kenzelmann <kernel.bugzilla@kenzelmann.dyndns.info> Reported-by: Denys Fedoryshchenko <nuclearcat@nuclearcat.com> Reported-by: Pawel Staszewski <pstaszewski@artcom.pl> Diagnosed-by: Andrej Ota <andrej@ota.si> Diagnosed-by: Eric Dumazet <eric.dumazet@gmail.com> Tested-by: Denys Fedoryshchenko <nuclearcat@nuclearcat.com> Tested-by: Pawel Staszewski <pstaszewski@artcom.pl> Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: Andrej Ota <andrej@ota.si> Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
bnx2x_src_init_t2() is used only when BCM_CNIC is defined.
So, to avoid a compilation warning, we won't define it unless
BCM_CNIC is defined.
Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Make the LSO code work on BE platforms: parsing_data field of
a parsing BD (PBD) for 57712 was improperly composed which made FW read wrong
values for TCP header's length and offset and, as a result, the corresponding
PCI device was performing bad DMA reads triggering EEH.
Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ron Mercer [Sat, 11 Dec 2010 11:06:50 +0000 (11:06 +0000)]
qlge: Fix deadlock when cancelling worker.
Removing usage of rtnl_lock() to protect firmware interface registers.
These registers are accessed in some worker threads and can create a
deadlock if rtnl_lock is taken by upper layers while the worker is still
pending.
We remove rtnl_lock and use a driver mutex just while mailboxes are
accessed.
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Agere FW643 rev 06, listed as "11c1:5901 (rev 06) (prog-if 10 [OHCI])",
produced SBP-2 I/O errors since kernel 2.6.36. Disabling MSI fixes it.
Since MSI work on Agere FW643-E (same vendor and device ID, but rev 07),
introduce a device revision field into firewire-ohci's quirks list so
that different quirks can be defined for older and newer revisions.
Reported-by: Jonathan Isom <jeisom@gmail.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: <stable@kernel.org> # 2.6.36.y
Stefan Richter [Tue, 7 Dec 2010 18:16:02 +0000 (19:16 +0100)]
firewire: ohci: fix regression with VIA VT6315, disable MSI
"VIA Technologies, Inc. VT6315 Series Firewire Controller [1106:3403]"
does not generate any interrupts if Message Signaled Interrupts were
enabled. This is a regression since kernel 2.6.36 in which MSI support
was added to firewire-ohci. Hence blacklist MSI on all VIA controllers.
Reported-by: Robin Cook <rcook@wyrms.net> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: <stable@kernel.org> # 2.6.36.y
Zhang Rui [Wed, 8 Dec 2010 02:40:26 +0000 (10:40 +0800)]
ACPI thermal: remove two unused functions
When CONFIG_CPU_FREQ=n ...
drivers/acpi/processor_thermal.c:159:12: warning: ‘acpi_thermal_cpufreq_increase’ defined but not used
drivers/acpi/processor_thermal.c:163:12: warning: ‘acpi_thermal_cpufreq_decrease’ defined but not used
Remove unused declaration of ‘acpi_thermal_cpufreq_increase’ and
‘acpi_thermal_cpufreq_decrease’
Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
Zhang Rui [Wed, 8 Dec 2010 02:40:36 +0000 (10:40 +0800)]
ACPI: fix a section mismatch
WARNING: drivers/acpi/acpi.o(.text+0xeda): Section mismatch in reference from the function acpi_os_initialize1() to the function .init.text:set_osi_linux()
The function acpi_os_initialize1() references
the function __init set_osi_linux().
Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
Chris Wilson [Sun, 5 Sep 2010 13:51:49 +0000 (14:51 +0100)]
ACPI: video: fix build for CONFIG_ACPI=n
In file included from drivers/gpu/drm/i915/intel_opregion.c:30:
include/acpi/video.h:22: warning: ‘struct acpi_device’ declared inside parameter list
...
include/acpi/video.h:24: error: ‘ENODEV’ undeclared (first use in this function)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Len Brown <len.brown@intel.com>
Len Brown [Tue, 30 Nov 2010 23:21:46 +0000 (18:21 -0500)]
ACPI: video: fix build for VIDEO_OUTPUT_CONTROL=n
drivers/built-in.o: In function `acpi_video_bus_put_devices':
video.c:(.text+0x79663): undefined reference to
`video_output_unregister'
drivers/built-in.o: In function `acpi_video_bus_add':
video.c:(.text+0x7b0b3): undefined reference to `video_output_register'
This actually never installs _OSI string(acpi_install_interface not
called), but just copy the _OSI string to osi_setup_string.
This patch fixes the regression.
Reported-and-tested-by: Lukas Hejtmanek <xhejtman@ics.muni.cz> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
Eric Dumazet [Sun, 5 Dec 2010 18:50:32 +0000 (18:50 +0000)]
net: fix skb_defer_rx_timestamp()
After commit c1f19b51d1d8 (net: support time stamping in phy devices.),
kernel might crash if CONFIG_NETWORK_PHY_TIMESTAMPING=y and
skb_defer_rx_timestamp() handles a packet without an ethernet header.
Fixes kernel bugzilla #24102
Reference: https://bugzilla.kernel.org/show_bug.cgi?id=24102 Reported-and-tested-by: Andrew Watts <akwatts@ymail.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds the IC+ IP1001 (Gigabit Ethernet Transceiver) driver.
I've had to add an additional delay (2ns) to adjust RX clock phase at
GMII/ RGMII interface (according to the PHY data-sheet). This helps to
have the RGMII working on some ST platforms.
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Williams [Wed, 8 Dec 2010 19:40:47 +0000 (19:40 +0000)]
atm: correct sysfs 'device' link creation and parent relationships
The ATM subsystem was incorrectly creating the 'device' link for ATM
nodes in sysfs. This led to incorrect device/parent relationships
exposed by sysfs and udev. Instead of rolling the 'device' link by hand
in the generic ATM code, pass each ATM driver's bus device down to the
sysfs code and let sysfs do this stuff correctly.
Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Kyle McMartin [Thu, 9 Dec 2010 09:50:08 +0000 (09:50 +0000)]
MAINTAINERS: remove me from tulip
It was a nice idea, but -ENOTIME and -ENOHW. I never got around to doing
a lot of the clean up that I intended to.
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca> Acked-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Yongjun [Tue, 7 Dec 2010 17:11:09 +0000 (17:11 +0000)]
SCTP: Fix SCTP_SET_PEER_PRIMARY_ADDR to accpet v4mapped address
SCTP_SET_PEER_PRIMARY_ADDR does not accpet v4mapped address, using
v4mapped address in SCTP_SET_PEER_PRIMARY_ADDR socket option will
get -EADDRNOTAVAIL error if v4map is enabled. This patch try to
fix it by mapping v4mapped address to v4 address if allowed.
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Acked-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
enic: Bug Fix: Pass napi reference to the isr that services receive queue
Pass reference to napi instead of enic device to the isr that services receive queue.
Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David Wang <dwang2@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Li Zefan [Fri, 10 Dec 2010 06:41:56 +0000 (06:41 +0000)]
Btrfs: Make async snapshot ioctl more generic
If we had reserved some bytes in struct btrfs_ioctl_vol_args, we
wouldn't have to create a new structure for async snapshot creation.
Here we convert async snapshot ioctl to use a more generic ABI, as
we'll add more ioctls for snapshots/subvolumes in the future, readonly
snapshots for example.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
Xin Zhong [Thu, 9 Dec 2010 09:30:14 +0000 (09:30 +0000)]
Btrfs: pwrite blocked when writing from the mmaped buffer of the same page
This problem is found in meego testing:
http://bugs.meego.com/show_bug.cgi?id=6672
A file in btrfs is mmaped and the mmaped buffer is passed to pwrite to write to the same page
of the same file. In btrfs_file_aio_write(), the pages is locked by prepare_pages(). So when
btrfs_copy_from_user() is called, page fault happens and the same page needs to be locked again
in filemap_fault(). The fix is to move iov_iter_fault_in_readable() before prepage_pages() to make page
fault happen before pages are locked. And also disable page fault in critical region in
btrfs_copy_from_user().
Yan, Zheng [Mon, 6 Dec 2010 07:02:36 +0000 (07:02 +0000)]
Btrfs: Fix page leak in compressed writeback path
"start + num_bytes >= actual_end" can happen when compressed page writeback races
with file truncation. In that case we need unlock and release pages past the end
of file.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
Josef Bacik [Wed, 8 Dec 2010 17:24:01 +0000 (12:24 -0500)]
Btrfs: do not BUG if we fail to remove the orphan item for dead snapshots
Not being able to delete an orphan item isn't a horrible thing. The worst that
happens is the next time around we try and do the orphan cleanup and we can't
find the referenced object and just delete the item and move on.
projects / mv-sheeva.git / log