This also turns off DEBUG_LL, and switches the hardcoded Samsung lowlevel
uart to uart 3 (which is only used to show the "uncompressing kernel"
message at boot, it seems).
Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Tushar Behera <tushar.behera@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Olof Johansson [Tue, 28 May 2013 02:26:30 +0000 (19:26 -0700)]
Merge tag 'samsung-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes
From Kukjin Kim:
Fixes following for v3.10
- to get usb2 working on the Chromebook with adding the
usb phy node for usb2 on exynos5250
- supporting exynos4210 rev0 SoC
- exynos5440 restart applying only to powered-on domains
- drm-exynos probe failure with adding resource names to
fimd0 platform device
* tag 'samsung-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: SAMSUNG: Add names to fimd0 IRQ resources
ARM: EXYNOS: fix software reset logic for EXYNOS5440 SOC
ARM: EXYNOS: Fix support of Exynos4210 rev0 SoC
ARM: dts: Enabling samsung-usb2phy driver for exynos5250
Olof Johansson [Fri, 24 May 2013 20:17:49 +0000 (13:17 -0700)]
Merge tag 'sunxi-fixes-for-3.10' of git://github.com/mripard/linux into fixes
From Maxime Ripard:
Small set of fixes for 3.10:
- Fix build breakage in pinctrl driver when no other architecture is selected
- Fix Mini X-plus device tree build
* tag 'sunxi-fixes-for-3.10' of git://github.com/mripard/linux:
ARM: sunxi: select ARCH_REQUIRE_GPIOLIB
ARM: sunxi: Fix Mini X-plus device tree build
Tomasz Figa [Fri, 24 May 2013 21:49:43 +0000 (06:49 +0900)]
ARM: SAMSUNG: Add names to fimd0 IRQ resources
Since commit 1977e6d8 (drm/exynos: change the method for getting the
interrupt) the Exynos DRM FIMD driver requires IRQ resources to be
named. This patch fixes probe failure in non-DT cases by adding
appropriate resource names to fimd0 platform device.
Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Jungseok Lee [Fri, 24 May 2013 21:33:03 +0000 (06:33 +0900)]
ARM: EXYNOS: fix software reset logic for EXYNOS5440 SOC
This patch fixes software reset logic. Software reset applies only to
powered-on domains in SOC because software reset to all domains causes
reboot failure.
Signed-off-by: Jungseok Lee <jays.lee@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Tomasz Figa [Fri, 24 May 2013 21:27:29 +0000 (06:27 +0900)]
ARM: EXYNOS: Fix support of Exynos4210 rev0 SoC
This patch extends exynos_init_time() function to handle Exynos4210
rev0 SoC, which differs in availability of system timers and needs
different clocksource initialization.
This makes it possible to use exynos_init_time() function as init_time
callback for all Exynos-based boards, including Universal_C210, which
originally had to use samsung_timer_init().
Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Olof Johansson [Wed, 22 May 2013 20:11:11 +0000 (13:11 -0700)]
Merge tag 'renesas-boards-marzen-fixes-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes
From Simon Horman:
Correct USB PHY initialisation on the marzen board.
* tag 'renesas-boards-marzen-fixes-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: marzen: Use error values in usb_power_*
Olof Johansson [Wed, 22 May 2013 20:09:20 +0000 (13:09 -0700)]
Merge tag 'omap-fixes-a-for-3.10-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into fixes
From Paul Walmsley:
Fix the OMAP serial driver to work correctly on OMAP4 when booting
with DT.
* tag 'omap-fixes-a-for-3.10-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending:
ARM: OMAP2+: hwmod: Remove sysc slave idle and auto idle apis
SERIAL: OMAP: Remove the slave idle handling from the driver
ARM: OMAP2+: serial: Remove the un-used slave idle hooks
ARM: OMAP2+: hwmod-data: UART IP needs software control to manage sidle modes
ARM: OMAP2+: hwmod: Add a new flag to handle SIDLE in SWSUP only in active
ARM: OMAP2+: hwmod: Fix sidle programming in _enable_sysc()/_idle_sysc()
The AK8975 Kconfig option was renamed during the 3.10 merge window.
Adjust tegra_defconfig to enable the new name, so it's not missing
useful features.
Tegra DRM support used to be enabled in the default Tegra configuration,
but it now depends on CONFIG_TEGRA_HOST1X which is disabled by default.
Enable CONFIG_TEGRA_HOST1X so that DRM support is compiled in again.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
[swarren, squashed Alex's and my changes together] Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
Linus Walleij [Sat, 18 May 2013 22:47:39 +0000 (00:47 +0200)]
ARM: nomadik: fix IRQ assignment for SMC ethernet
The assignment of IRQ for the SMC91x ethernet adapter had two
problems making it non-working:
- It was not put into the ethernet device node. Let's do this
by using the board-specific overlay, so we can make other
overlays on other Nomadik boards.
- The IRQ number was actually completely wrong, this was the
number for NHK8815, not S8815.
After this ethernet starts working on the USB S8815.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Tue, 21 May 2013 06:47:23 +0000 (23:47 -0700)]
Merge tag 'ux500-arm-soc-v3.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into fixes
From Linus Walleij, some ux500 fixes for the v3.10-rc series:
- Fixes up the debug UART
- Fix dangerous platform data double-assignment
- Fix auxdata for the ethernet device
- Select REGULATOR to satisfy Kconfig
* tag 'ux500-arm-soc-v3.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
ARM: ux500: select REGULATOR
ARM: ux500: Provide device enumeration number suffix for SMSC911x
ARM: ux500: Fix incorrect DEBUG UART virtual addresses
ARM: ux500: Remove duplicated assignment of ab8500_platdata
Olof Johansson [Tue, 21 May 2013 06:45:42 +0000 (23:45 -0700)]
Merge tag 'imx-fixes-3.10' of git://git.linaro.org/people/shawnguo/linux-2.6 into fixes
From Shawn Guo, imx fixes for 3.10:
- A few imx6 clock fixes. Nothing is extremely important, but since
we're still in early -rc, I send them for 3.10 inclusion.
- Having bootloader handle ARM errata, we will need to replicate the
diagnostic register of boot cpu into secondary cores, since
bootloader only sets up boot cpu. Otherwise, errata workaround simply
does not work.
* tag 'imx-fixes-3.10' of git://git.linaro.org/people/shawnguo/linux-2.6:
ARM: imx: fix typo in gpu3d_shader_sels
ARM: imx: replicate the diagnostic register of boot cpu into secondary cores
ARM i.MX6: correct MLB clock configuration
ARM i.MX6q: Fix periph_clk2_sel and periph2_clk2_sel clocks
Olof Johansson [Tue, 21 May 2013 06:41:04 +0000 (23:41 -0700)]
Merge tag 'fixes-3.10-2' of git://git.infradead.org/users/jcooper/linux into fixes
From Jason Cooper, mvebu fixes for v3.10 (round 2):
- mvebu (and orion SoCs)
- remove init_dma_coherent_pool_size()
- mvebu
- fix ranges DT property
- fix DT reg value for L2 cache
- select ARCH_REQUIRE_GPIOLIB
- orion legacy
- fix num_resources and id for ge10 and ge11
* tag 'fixes-3.10-2' of git://git.infradead.org/users/jcooper/linux:
ARM: dts: mvebu: Fix wrong the address reg value for the L2-cache node
ARM: plat-orion: Fix num_resources and id for ge10 and ge11
arm: mvebu: fix the 'ranges' property to handle PCIe
ARM: mvebu: select ARCH_REQUIRE_GPIOLIB for mvebu platform
ARM: mvebu: Fix ranges entry on XP GP board
ARM: Orion: Remove redundant init_dma_coherent_pool_size()
Olof Johansson [Tue, 21 May 2013 06:36:26 +0000 (23:36 -0700)]
Merge tag 'omap-for-v3.10-rc1/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
From Tony Lindgren, fixes for omaps:
- a section mismatch fix for hwmod
- boot fix for omap2plus_defconfig for omap2
- musb interrupt fix when using device tree
- am33xx clock fix that I missed earlier somehow
- omap1 dma return code error fix
* tag 'omap-for-v3.10-rc1/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: AM33XX: Add missing .clkdm_name to clkdiv32k_ick clock
ARM: OMAP2+: Add missing CONFIG_ARCH_MULTI_V6=y to omap2plus_defconfig
ARM: OMAP: fix error return code in omap1_system_dma_init()
ARM: OMAP: fix __init section mismatch for _enable_preprogram
ARM: dts: Fix musb interrupt for device tree booting
ARM: vt8500: Add missing NULL terminator in dt_compat
When I tried booting a stih415 Dual core A9 with multi_v7_defconfig, it
failed to boot. The issues seems to be changing by enabling or disabling
VT8550 platform. Having a quick look at dt_compat list, it seems to miss
a NULL terminator, which means of_flat_dt_match will compat check will
cross the boundary of dt_compat and fault at some point , which is what
was happening in my case.
Without this patch if we try to boot multi_v7_defconfig you might notice
that some of the platforms might fault if they fall after vt8500 in
machine-desc list. Other platforms which fall before vt8500 in mdesc list
will not fault.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Acked-by: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Tue, 21 May 2013 06:25:08 +0000 (23:25 -0700)]
Merge tag 'at91-fixes' of git://github.com/at91linux/linux-at91 into fixes
From Nicolas Ferre:
An important revert on at91rm9200 platform related
to timers that prevented the platform to boot properly.
Then one pinctrl adjustments for SPI CS and a couple of
trivial typos.
* tag 'at91-fixes' of git://github.com/at91linux/linux-at91:
ARM: at91: rm9200 fix time support
ARM: at91: dts: request only spi cs-gpios used on sama5d3x cpu module
ARM: at91/trivial: typo in GEM compatible string
ARM: at91/trivial: fix model name for SAM9X25-EK
Olof Johansson [Tue, 21 May 2013 06:24:49 +0000 (23:24 -0700)]
Merge tag 'fixes-3.10-1' of git://git.infradead.org/users/jcooper/linux into fixes
From Jason Cooper, mvebu fixes for v3.10:
- mvebu
- duplicate alias removal
- augment new internal-regs dt node with proper ranges node
- kirkwood
- stable fix for QNAP TS-11x/TS-21x enabling PCIe port 1
- plat-orion
- missing ehci include in common.h. needed within common.h.
* tag 'fixes-3.10-1' of git://git.infradead.org/users/jcooper/linux:
ARM: mvebu: Add a ranges entry to translate devbus childs
ARM: plat-orion: add missing ehci include to common.h
Kirkwood: Enable PCIe port 1 on QNAP TS-11x/TS-21x
ARM: mvebu: do not duplicate the mpic alias
Lucas Stach [Mon, 6 May 2013 21:11:11 +0000 (15:11 -0600)]
clk: tegra: add ac97 controller clock
AC97 controller clock is hardwired to pll_a_out0.
Signed-off-by: Lucas Stach <dev@lynxeye.de> Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com> Reviewed-by: Prashant Gaikwad <pgaikwad@nvidia.com> Acked-by: Mike Turquette <mturquette@linaro.org> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
Lucas Stach [Mon, 6 May 2013 21:11:10 +0000 (15:11 -0600)]
clk: tegra: remove USB from clk init table
The USB clocks are just clock gates, so no need to set a specific clock.
In fact trying to set a specific clock is just a NOP if the requested
clockrate is the same as those of the parent (clk_m) or will trigger a
WARN_ON() if rates don't match up.
As we are not setting a specific rate, nor activating the clocks at
init, there is no point in keeping the the usb entries in the clock init
table.
Signed-off-by: Lucas Stach <dev@lynxeye.de> Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com> Reviewed-by: Prashant Gaikwad <pgaikwad@nvidia.com> Acked-by: Mike Turquette <mturquette@linaro.org> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
Linus Torvalds [Mon, 20 May 2013 21:25:19 +0000 (14:25 -0700)]
Merge tag 'stable/for-linus-3.10-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
Pull Xen fixes from Konrad Rzeszutek Wilk:
- Regression fix in xen privcmd fixing a memory leak.
- Add Documentation for tmem driver.
- Simplify and remove code in the tmem driver.
- Cleanups.
* tag 'stable/for-linus-3.10-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
xen: Fixed assignment error in if statement
xen/xenbus: Fixed over 80 character limit issue
xen/xenbus: Fixed indentation error in switch case
xen/tmem: Don't use self[ballooning|shrinking] if frontswap is off.
xen/tmem: Remove the usage of '[no|]selfballoon' and use 'tmem.selfballooning' bool instead.
xen/tmem: Remove the usage of 'noselfshrink' and use 'tmem.selfshrink' bool instead.
xen/tmem: Remove the boot options and fold them in the tmem.X parameters.
xen/tmem: s/disable_// and change the logic.
xen/tmem: Fix compile warning.
xen/tmem: Split out the different module/boot options.
xen/tmem: Move all of the boot and module parameters to the top of the file.
xen/tmem: Cleanup. Remove the parts that say temporary.
xen/privcmd: fix condition in privcmd_close()
Linus Torvalds [Mon, 20 May 2013 18:36:52 +0000 (11:36 -0700)]
Merge tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- Error path fixes for abituguru and iio_hwmon drivers.
- Drop erroneously created attributes from nct6775 driver.
- Drop redundant safety on cache lifetime for tmp401 driver.
- Add explicit maintainer for LM95234 and TMP401 drivers.
* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
MAINTAINERS: Add myself as maintainer for LM95234 and TMP401 drivers
hwmon: (tmp401) Drop redundant safety on cache lifetime
hwmon: fix error return code in abituguru_probe()
hwmon: (iio_hwmon) Fix null pointer dereference
hwmon: (nct6775) Do not create non-existing attributes
hwmon: (iio_hwmon) Fix missing iio_channel_release_all call if devm_kzalloc fail
Linus Torvalds [Mon, 20 May 2013 18:36:03 +0000 (11:36 -0700)]
x86: Fix bit corruption at CPU resume time
In commit 78d77df71510 ("x86-64, init: Do not set NX bits on non-NX
capable hardware") we added the early_pmd_flags that gets the NX bit set
when a CPU supports NX. However, the new variable was marked __initdata,
because the main _use_ of this is in an __init routine.
However, the bit setting happens from secondary_startup_64(), which is
called not only at bootup, but on every secondary CPU start. Including
resuming from STR and at CPU hotplug time. So the value cannot be
__initdata.
Reported-bisected-and-tested-by: Michal Hocko <mhocko@suse.cz> Cc: stable@vger.kernel.org # v3.9 Acked-by: Peter Anvin <hpa@linux.intel.com> Cc: Fernando Luis Vázquez Cao <fernando@oss.ntt.co.jp> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Gregory CLEMENT [Mon, 20 May 2013 14:13:27 +0000 (16:13 +0200)]
ARM: dts: mvebu: Fix wrong the address reg value for the L2-cache node
During the conversion to the internal-regs' subnode, the L2-cache node
haven not been converted (due to a wrong choice made by myself during
the resolution of the merge conflict when I rebased the commit). This
leads to wrong address for L2 cache which prevent it to be used on
Armada 370. This commit fix the address reg of the e L2-cache node.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Gregory CLEMENT [Sun, 19 May 2013 20:12:43 +0000 (22:12 +0200)]
ARM: plat-orion: Fix num_resources and id for ge10 and ge11
When platform data were moved from arch/arm/mach-mv78xx0/common.c to
arch/arm/plat-orion/common.c with the commit "7e3819d ARM: orion:
Consolidate ethernet platform data", there were few typo made on
gigabit Ethernet interface ge10 and ge11. This commit writes back
their initial value, which allows to use this interfaces again.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Cc: <stable@vger.kernel.org> # v3.0.x Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Linus Torvalds [Mon, 20 May 2013 14:59:46 +0000 (07:59 -0700)]
Merge tag 'pinctrl-fixes-v3.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pinctrl fixes from Linus Walleij:
- Three fixes to make the boot path for device tree work properly on
the Nomadik pin controller.
- Compile warning fix for the vt8500 driver.
- Fix error path in pinctrl-single.
- Free mappings in error path of the Lantiq controller.
- Documentation fixes.
* tag 'pinctrl-fixes-v3.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl/lantiq: Free mapping configs for both pin and groups
pinctrl: single: fix error return code in pcs_parse_one_pinctrl_entry()
pinctrl: generic: Fix typos and clarify comments
pinctrl: vt8500: Fix incorrect data in WM8750 pinctrl table
pinctrl: abx500: Rejiggle platform data and DT initialisation
pinctrl: abx500: Specify failed sub-driver by ID instead of driver_data
Guenter Roeck [Mon, 20 May 2013 03:44:27 +0000 (20:44 -0700)]
MAINTAINERS: Add myself as maintainer for LM95234 and TMP401 drivers
I wrote the LM95234 driver and extended the TMP401 driver substantially,
and I have hardware to test both, so it makes sense to explicitly
maintain them.
Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Jean Delvare <khali@linux-fr.org>
SERIAL: OMAP: Remove the slave idle handling from the driver
UART IP slave idle handling now taken care by runtime pm backend(hwmod layer)
so remove the hackery from the driver.
As discussed on the list, in future if dma mode needs to be brought
back to this driver, UART sysc handling needs to be updated in
framework such a way that no-idle/force idle profile can be supported.
Given the broken dma mode for OMAP uarts, its very unlikely.
ARM: OMAP2+: hwmod-data: UART IP needs software control to manage sidle modes
OMAP UART IP needs software control for slave idle modes based on functional
state of the IP. i.e The IP slave idle settings should be set to 'noidle' when
being used and then put back to 'smart_idle' when unused. Currently this is
handled by the driver with function pointers implemented in platform code.
This however breaks in case of device tree because of missing idle handling
APIs.
Previous patches in this series added a flag HWMOD_SWSUP_SIDLE_ACTIVE which
takes care of the mentioned requirement. Hence add the flag for all UART IPs
to take advantage of feature supported by framework.
Subsequent patches removes the slave idle handling from driver code.
Tested-by: Vaibhav Bedia <vaibhav.bedia@ti.com> Tested-by: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> # OMAP4/Panda Signed-off-by: Paul Walmsley <paul@pwsan.com>
Rajendra Nayak [Wed, 15 May 2013 14:48:38 +0000 (20:18 +0530)]
ARM: OMAP2+: hwmod: Add a new flag to handle SIDLE in SWSUP only in active
Some IPs (like UART) need the sidle mode to be controlled in SW only
while they are active. Once they go inactive, they need the IP to be
put back in HW control so they are also wakeup capable.
The flag HWMOD_SWSUP_SIDLE takes care of IPs which need the sidle
mode to be *always* controlled in SWSUP. We now have a need to control
IPs sidle mode in SWSUP only while its active.
So define a new flag 'HWMOD_SWSUP_SIDLE_ACT' to help the framework
know about these new IP requirements.
Tested-by: Vaibhav Bedia <vaibhav.bedia@ti.com> Tested-by: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> # OMAP4/Panda Signed-off-by: Paul Walmsley <paul@pwsan.com>
Rajendra Nayak [Wed, 15 May 2013 14:48:37 +0000 (20:18 +0530)]
ARM: OMAP2+: hwmod: Fix sidle programming in _enable_sysc()/_idle_sysc()
_enable_sysc() and _idle_sysc() handle the midle mode programming correctly
and program HWMOD_IDLEMODE_SMART or HWMOD_IDLEMODE_SMART_WKUP respectively
for supported IPs (The ones which support hardware controlled midle modes)
However the same programming logic is missing when it comes to sidle mode
programming. Here they seem to just set HWMOD_IDLEMODE_SMART (Again for the
ones which support hardware controlled sidle modes)
This problem was hidden due to the fact that a call to _enable_wakeup()
in those same functions would overwrite the idlemodes and program them
correctly (to HWMOD_IDLEMODE_SMART_WKUP in the supported cases)
So fix the sidlemode handling correctly in these functions and handle the
_enable_wakeup() for SIDLEMODE supported IPs same as the way its handled
for MIDLEMODE supported ones.
Tested-by: Vaibhav Bedia <vaibhav.bedia@ti.com> Tested-by: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> # OMAP4/Panda Signed-off-by: Paul Walmsley <paul@pwsan.com>
Thomas Petazzoni [Thu, 16 May 2013 15:55:16 +0000 (17:55 +0200)]
arm: mvebu: fix the 'ranges' property to handle PCIe
Since 82a682676 ('ARM: dts: mvebu: Convert all the mvebu files to use
the range property') all the device nodes of Armada 370/XP are under a
common 'ranges' property that translates the device register addresses
into their absolute address, thanks to the base address of the
internal register space.
However, beyond just the register areas, there are also PCIe I/O and
memory regions, whose addresses should be properly translated. This
patch fixes the Armada 370 and XP ranges property to take PCIe into
account properly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Gregory CLEMENT [Fri, 17 May 2013 12:25:03 +0000 (14:25 +0200)]
ARM: mvebu: select ARCH_REQUIRE_GPIOLIB for mvebu platform
Initially ARCH_REQUIRE_GPIOLIB was part of Thomas Petazzoni series
when he introduced the gpiolib support for mvebu: 93a59cf arm: mvebu: use GPIO support now that a driver is available
This commit was written to be applied for the ARCH_MVEBU which was
located in arch/arm/KConfig and was merged in 3.7.
In the same time Rob Herring moved the ARCH_MVEBU block to
arch/arm/mach-mvebu/Kconfig with this commit and also merged in 3.7: 387798b ARM: initial multiplatform support
Unfortunately the ARCH_REQUIRE_GPIOLIB have been lost during this
migration. This was not noticed until the v3.10-rc1, because mvebu as
part of ARCH_MULTIPLATFORM was always selected with ARCH_VEXPRESS, and
this architect selected ARCH_REQUIRE_GPIOLIB.
Since the following commit from Arnd: "883a106 ARM: default machine
descriptor for multiplatform", ARCH_VEXPRESS was then no more selected
by default with ARCH_MVEBU and it made appeared the lack of
ARCH_REQUIRE_GPIOLIB for mvebu. This commit added back the selection
of ARCH_REQUIRE_GPIOLIB for ARCH_MVEBU.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Fix detection of the need to resize the dm thin metadata device.
The code incorrectly tried to extend the metadata device when it
didn't need to due to a merging error with patch 24347e9 ("dm thin:
detect metadata device resizing").
device-mapper: transaction manager: couldn't open metadata space map
device-mapper: thin metadata: tm_open_with_sm failed
device-mapper: thin: aborting transaction failed
device-mapper: thin: switching pool to failure mode
Jean Delvare [Sun, 19 May 2013 14:57:30 +0000 (16:57 +0200)]
hwmon: (tmp401) Drop redundant safety on cache lifetime
time_after (as opposed to time_after_equal) already ensures that the
cache lifetime is at least as much as requested. There is no point in
manually adding another jiffy to that value, and this can confuse the
reader into wrong interpretation.
Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Imre Deak <imre.deak@intel.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Linus Torvalds [Sat, 18 May 2013 18:35:28 +0000 (11:35 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull btrfs fixes from Chris Mason:
"Miao Xie has been very busy, fixing races and enospc problems and many
other small but important pieces.
Alexandre Oliva discovered some problems with how our error handling
was interacting with the block layer and for now has disabled our
partial handling of sub-page writes. The real sub-page work is in a
series of patches from IBM that we still need to integrate and test.
The code Alexandre has turned off was really incomplete.
Josef has more error handling fixes and an important fix for the new
skinny extent format.
This also has my fix for the tracepoint crash from late in 3.9. It's
the first stage in a larger clean up to get rid of btrfs_bio and make
a proper bioset for all the items we need to tack into the bio. For
now the bioset only holds our mirror_num and stripe_index, but for the
next merge window I'll shuffle more in."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (25 commits)
Btrfs: use a btrfs bioset instead of abusing bio internals
Btrfs: make sure roots are assigned before freeing their nodes
Btrfs: explicitly use global_block_rsv for quota_tree
btrfs: do away with non-whole_page extent I/O
Btrfs: don't invoke btrfs_invalidate_inodes() in the spin lock context
Btrfs: remove BUG_ON() in btrfs_read_fs_tree_no_radix()
Btrfs: pause the space balance when remounting to R/O
Btrfs: fix unprotected root node of the subvolume's inode rb-tree
Btrfs: fix accessing a freed tree root
Btrfs: return errno if possible when we fail to allocate memory
Btrfs: update the global reserve if it is empty
Btrfs: don't steal the reserved space from the global reserve if their space type is different
Btrfs: optimize the error handle of use_block_rsv()
Btrfs: don't use global block reservation for inode cache truncation
Btrfs: don't abort the current transaction if there is no enough space for inode cache
Correct allowed raid levels on balance.
Btrfs: fix possible memory leak in replace_path()
Btrfs: fix possible memory leak in the find_parent_nodes()
Btrfs: don't allow device replace on RAID5/RAID6
Btrfs: handle running extent ops with skinny metadata
...
Linus Torvalds [Sat, 18 May 2013 17:54:54 +0000 (10:54 -0700)]
Merge branch 'devm_no_resource_check' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull devm usage cleanup from Wolfram Sang:
"Lately, I have been experimenting how to improve the devm interface to
make writing device drivers easier and less error prone while also
getting rid of its subtle issues. I think it has more potential but
still needs work and definately conistency, especiall in its usage.
The first thing I come up with is a low hanging fruit regarding
devm_ioremap_resouce(). This function already checks if the passed
resource is valid and gives an error message if not. So, we can
remove similar checks from the drivers and get rid of a bit of code
and a number of inconsistent error strings.
This series only removes the unneeded check iff devm_ioremap_resource
follows platform_get_resource directly. The previous version tried to
shuffle code if needed, too, what lead to an embarrasing bug. It
turned out to me that shuffling code for all cases found will make the
automated script too complex, so I am unsure if an automated cleanup
is the proper tool for this case. Removing the easy stuff seems
worthwhile to me, though.
Despite various architectures and platform dependencies, I managed to
compile test 45 out of 57 modified files locally using heuristics and
defconfigs."
Pulled because: 296 deletions, 0 additions.
* 'devm_no_resource_check' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (33 commits)
sound/soc/kirkwood: don't check resource with devm_ioremap_resource
sound/soc/fsl: don't check resource with devm_ioremap_resource
arch/mips/lantiq/xway: don't check resource with devm_ioremap_resource
arch/arm/plat-samsung: don't check resource with devm_ioremap_resource
arch/arm/mach-tegra: don't check resource with devm_ioremap_resource
drivers/watchdog: don't check resource with devm_ioremap_resource
drivers/w1/masters: don't check resource with devm_ioremap_resource
drivers/video/omap2/dss: don't check resource with devm_ioremap_resource
drivers/video/omap2: don't check resource with devm_ioremap_resource
drivers/usb/phy: don't check resource with devm_ioremap_resource
drivers/usb/host: don't check resource with devm_ioremap_resource
drivers/usb/gadget: don't check resource with devm_ioremap_resource
drivers/usb/chipidea: don't check resource with devm_ioremap_resource
drivers/thermal: don't check resource with devm_ioremap_resource
drivers/staging/nvec: don't check resource with devm_ioremap_resource
drivers/staging/dwc2: don't check resource with devm_ioremap_resource
drivers/spi: don't check resource with devm_ioremap_resource
drivers/rtc: don't check resource with devm_ioremap_resource
drivers/pwm: don't check resource with devm_ioremap_resource
drivers/pinctrl: don't check resource with devm_ioremap_resource
...
Linus Torvalds [Sat, 18 May 2013 17:46:50 +0000 (10:46 -0700)]
Merge tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux
Pull device tree fixes from Grant Likely:
"Device tree bug fixes and documentation updates for v3.10
Nothing earth shattering here. A build failure fix, and fix for
releasing nodes and some documenation updates."
* tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux:
Documentation/devicetree: make semantic of initrd-end more explicit
of/base: release the node correctly in of_parse_phandle_with_args()
of/documentation: move video device bindings to a common place
<linux/of_platform.h>: fix compilation warnings with DT disabled
Linus Torvalds [Sat, 18 May 2013 17:36:37 +0000 (10:36 -0700)]
Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS fixes from Ralf Baechle:
"Patching up across the field. The reversion of the two ASID patches
is particularly important as it was breaking many platforms."
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MIPS: ralink: use the dwc2 driver for the rt305x USB controller
MIPS: Extract schedule_mfi info from __schedule
MIPS: Fix sibling call handling in get_frame_info
MIPS: MSP71xx: remove inline marking of EXPORT_SYMBOL functions
MIPS: Make virt_to_phys() work for all unmapped addresses.
MIPS: Fix build error for crash_dump.c in 3.10-rc1
MIPS: Xway: Fix clk leak
Revert "MIPS: Allow ASID size to be determined at boot time."
Revert "MIPS: microMIPS: Support dynamic ASID sizing."
Linus Torvalds [Sat, 18 May 2013 17:21:32 +0000 (10:21 -0700)]
Merge tag 'kmemleak-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64
Pull kmemleak patches from Catalin Marinas:
"Kmemleak now scans all the writable and non-executable module sections
to avoid false positives (previously it was only scanning specific
sections and missing .ref.data)."
* tag 'kmemleak-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64:
kmemleak: No need for scanning specific module sections
kmemleak: Scan all allocated, writeable and not executable module sections
Linus Torvalds [Sat, 18 May 2013 17:20:46 +0000 (10:20 -0700)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64
Pull arm64 fixes from Catalin Marinas:
"Fixes for duplicate definition of early_console, kernel/time/Kconfig
include, __flush_dcache_all() set/way computing, debug (locking, bit
testing). The of_platform_populate() was moved to an arch_init_call()
to allow subsys_init_call() drivers to probe the DT."
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64:
arm64: debug: fix mdscr.ss check when enabling debug exceptions
arm64: Do not source kernel/time/Kconfig explicitly
arm64: mm: Fix operands of clz in __flush_dcache_all
arm64: Invoke the of_platform_populate() at arch_initcall() level
arm64: debug: clear mdscr_el1 instead of taking the OS lock
arm64: Fix duplicate definition of early_console
Chris Mason [Fri, 17 May 2013 22:30:14 +0000 (18:30 -0400)]
Btrfs: use a btrfs bioset instead of abusing bio internals
Btrfs has been pointer tagging bi_private and using bi_bdev
to store the stripe index and mirror number of failed IOs.
As bios bubble back up through the call chain, we use these
to decide if and how to retry our IOs. They are also used
to count IO failures on a per device basis.
Recently a bio tracepoint was added lead to crashes because
we were abusing bi_bdev.
This commit adds a btrfs bioset, and creates explicit fields
for the mirror number and stripe index. The plan is to
extend this structure for all of the fields currently in
struct btrfs_bio, which will mean one less kmalloc in
our IO path.
Signed-off-by: Chris Mason <chris.mason@fusionio.com> Reported-by: Tejun Heo <tj@kernel.org>
Josef Bacik [Fri, 17 May 2013 18:06:51 +0000 (14:06 -0400)]
Btrfs: make sure roots are assigned before freeing their nodes
If we fail to load the chunk tree we'll call free_root_pointers, except we may
not have assigned the roots for the dev_root/extent_root/csum_root yet, so we
could NULL pointer deref at this point. Just add checks to make sure these
roots are set to keep us from panicing. Thanks,
Stefan Behrens [Thu, 16 May 2013 14:48:19 +0000 (14:48 +0000)]
Btrfs: explicitly use global_block_rsv for quota_tree
The quota_tree was set up to use the empty_block_rsv before
which would be problematic when the filesystem is filled up
and ENOSPC happens during internal operations while the quota
tree is updated and COWed (when the btrfs_qgroup_info_item
items) are written. In fact, use_block_rsv() which is used
in btrfs_cow_block() falls back to the global_block_rsv in
this case. But just in order to make it more clear what is
happening, change it to explicitly use the global_block_rsv.
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Alexandre Oliva [Wed, 15 May 2013 15:38:55 +0000 (11:38 -0400)]
btrfs: do away with non-whole_page extent I/O
end_bio_extent_readpage computes whole_page based on bv_offset and
bv_len, without taking into account that blk_update_request may modify
them when some of the blocks to be read into a page produce a read
error. This would cause the read to unlock only part of the file
range associated with the page, which would in turn leave the entire
page locked, which would not only keep the process blocked instead of
returning -EIO to it, but also prevent any further access to the file.
It turns out that btrfs always issues whole-page reads and writes.
The special handling of non-whole_page appears to be a mistake or a
left-over from a time when this wasn't the case. Indeed,
end_bio_extent_writepage distinguished between whole_page and
non-whole_page writes but behaved identically in both cases!
I've replaced the whole_page computations with warnings, just to be
sure that we're not issuing partial page reads or writes. The
warnings should probably just go away some time.
Signed-off-by: Alexandre Oliva <oliva@gnu.org> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Miao Xie [Wed, 15 May 2013 07:48:15 +0000 (07:48 +0000)]
Btrfs: fix accessing a freed tree root
inode_tree_del() will move the tree root into the dead root list, and
then the tree will be destroyed by the cleaner. So if we remove the
delayed node which is cached in the inode after inode_tree_del(),
we may access a freed tree root. Fix it.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Miao Xie [Mon, 13 May 2013 13:55:12 +0000 (13:55 +0000)]
Btrfs: update the global reserve if it is empty
Before applying this patch, we reserved the space for the global reserve
by the minimum unit if we found it is empty, it was unreasonable and
inefficient, because if the global reserve space was depleted, it implied
that the size of the global reserve was too small. In this case, we shoud
update the global reserve and fill it.
Miao Xie [Mon, 13 May 2013 13:55:11 +0000 (13:55 +0000)]
Btrfs: don't steal the reserved space from the global reserve if their space type is different
If the type of the space we need is different with the global reserve, we
can not steal the space from the global reserve, because we can not allocate
the space from the free space cache that the global reserve points to.
Miao Xie [Mon, 13 May 2013 13:55:09 +0000 (13:55 +0000)]
Btrfs: don't use global block reservation for inode cache truncation
It is very likely that there are lots of subvolumes/snapshots in the filesystem,
so if we use global block reservation to do inode cache truncation, we may hog
all the free space that is reserved in global rsv. So it is better that we do
the free space reservation for inode cache truncation by ourselves.
projects / linux-beck.git / log