Chris Mason [Thu, 17 Jul 2008 16:54:05 +0000 (12:54 -0400)]
Btrfs: Update on disk i_size only after pending ordered extents are done
This changes the ordered data code to update i_size after the extent
is on disk. An on disk i_size is maintained in the in-memory btrfs inode
structures, and this is updated as extents finish.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Chris Mason [Thu, 17 Jul 2008 16:53:51 +0000 (12:53 -0400)]
Btrfs: Use async helpers to deal with pages that have been improperly dirtied
Higher layers sometimes call set_page_dirty without asking the filesystem
to help. This causes many problems for the data=ordered and cow code.
This commit detects pages that haven't been properly setup for IO and
kicks off an async helper to deal with them.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Chris Mason [Thu, 17 Jul 2008 16:53:50 +0000 (12:53 -0400)]
Btrfs: New data=ordered implementation
The old data=ordered code would force commit to wait until
all the data extents from the transaction were fully on disk. This
introduced large latencies into the commit and stalled new writers
in the transaction for a long time.
The new code changes the way data allocations and extents work:
* When delayed allocation is filled, data extents are reserved, and
the extent bit EXTENT_ORDERED is set on the entire range of the extent.
A struct btrfs_ordered_extent is allocated an inserted into a per-inode
rbtree to track the pending extents.
* As each page is written EXTENT_ORDERED is cleared on the bytes corresponding
to that page.
* When all of the bytes corresponding to a single struct btrfs_ordered_extent
are written, The previously reserved extent is inserted into the FS
btree and into the extent allocation trees. The checksums for the file
data are also updated.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Chris Mason [Wed, 25 Jun 2008 20:14:04 +0000 (16:14 -0400)]
Btrfs: Reduce contention on the root node
This calls unlock_up sooner in btrfs_search_slot in order to decrease the
amount of work done with the higher level tree locks held.
Also, it changes btrfs_tree_lock to spin for a big against the page lock
before scheduling. This makes a big difference in context switch rate under
highly contended workloads.
Longer term, a better locking structure is needed than the page lock.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Chris Mason [Wed, 25 Jun 2008 20:01:31 +0000 (16:01 -0400)]
Add btrfs_end_transaction_throttle to force writers to wait for pending commits
The existing throttle mechanism was often not sufficient to prevent
new writers from coming in and making a given transaction run forever.
This adds an explicit wait at the end of most operations so they will
allow the current transaction to close.
There is no wait inside file_write, inode updates, or cow filling, all which
have different deadlock possibilities.
This is a temporary measure until better asynchronous commit support is
added. This code leads to stalls as it waits for data=ordered
writeback, and it really needs to be fixed.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Chris Mason [Wed, 25 Jun 2008 20:01:30 +0000 (16:01 -0400)]
Btrfs: Add a skip_locking parameter to struct path, and make various funcs honor it
Allocations may need to read in block groups from the extent allocation tree,
which will require a tree search and take locks on the extent allocation
tree. But, those locks might already be held in other places, leading
to deadlocks.
Since the alloc_mutex serializes everything right now, it is safe to
skip the btree locking while caching block groups. A better fix will be
to either create a recursive lock or find a way to back off existing
locks while caching block groups.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Chris Mason [Wed, 25 Jun 2008 20:01:30 +0000 (16:01 -0400)]
Drop locks in btrfs_search_slot when reading a tree block.
One lock per btree block can make for significant congestion if everyone
has to wait for IO at the high levels of the btree. This drops
locks held by a path when doing reads during a tree search.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Chris Mason [Wed, 25 Jun 2008 20:01:30 +0000 (16:01 -0400)]
Btrfs: Replace the big fs_mutex with a collection of other locks
Extent alloctions are still protected by a large alloc_mutex.
Objectid allocations are covered by a objectid mutex
Other btree operations are protected by a lock on individual btree nodes
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Chris Mason [Wed, 25 Jun 2008 20:01:30 +0000 (16:01 -0400)]
Btrfs: Start btree concurrency work.
The allocation trees and the chunk trees are serialized via their own
dedicated mutexes. This means allocation location is still not very
fine grained.
The main FS btree is protected by locks on each block in the btree. Locks
are taken top / down, and as processing finishes on a given level of the
tree, the lock is released after locking the lower level.
The end result of a search is now a path where only the lowest level
is locked. Releasing or freeing the path drops any locks held.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Chris Mason [Thu, 12 Jun 2008 01:47:56 +0000 (21:47 -0400)]
Btrfs: Add a mount option to control worker thread pool size
mount -o thread_pool_size changes the default, which is
min(num_cpus + 2, 8). Larger thread pools would make more sense on
very large disk arrays.
This mount option controls the max size of each thread pool. There
are multiple thread pools, so the total worker count will be larger
than the mount option.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Chris Mason [Wed, 11 Jun 2008 20:51:38 +0000 (16:51 -0400)]
Btrfs: Fix mount -o max_inline=0
max_inline=0 used to force the max_inline size to one sector instead. Now
it properly disables inline data items, while still being able to read
any that happen to exist on disk.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Chris Mason [Wed, 11 Jun 2008 20:50:36 +0000 (16:50 -0400)]
Btrfs: Add async worker threads for pre and post IO checksumming
Btrfs has been using workqueues to spread the checksumming load across
other CPUs in the system. But, workqueues only schedule work on the
same CPU that queued the work, giving them a limited benefit for systems with
higher CPU counts.
This code adds a generic facility to schedule work with pools of kthreads,
and changes the bio submission code to queue bios up. The queueing is
important to make sure large numbers of procs on the system don't
turn streaming workloads into random workloads by sending IO down
concurrently.
The end result of all of this is much higher performance (and CPU usage) when
doing checksumming on large machines. Two worker pools are created,
one for writes and one for endio processing. The two could deadlock if
we tried to service both from a single pool.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
btrfs: allow scanning multiple devices during mount
Allows to specify one or multiple device=/dev/foo options during mount
so that ioctls on the control device can be avoided. Especially useful
when trying to mount a multi-device setup as root.
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
Sage Weil [Tue, 10 Jun 2008 14:07:39 +0000 (10:07 -0400)]
Btrfs: transaction ioctls
These ioctls let a user application hold a transaction open while it
performs a series of operations. A final ioctl does a sync on the fs
(closing the current transaction). This is the main requirement for
Ceph's OSD to be able to keep the data it's storing in a btrfs volume
consistent, and AFAICS it works just fine. The application would do
something like
fd = ::open("some/file", O_RDONLY);
::ioctl(fd, BTRFS_IOC_TRANS_START);
/* do a bunch of stuff */
::ioctl(fd, BTRFS_IOC_TRANS_END);
or just
::close(fd);
And to ensure it commits to disk,
::ioctl(fd, BTRFS_IOC_SYNC);
When a transaction is held open, the trans_handle is attached to the
struct file (via private_data) so that it will get cleaned up if the
process dies unexpectedly. A held transaction is also ended on fsync() to
avoid a deadlock.
A misbehaving application could also deliberately hold a transaction open,
effectively locking up the FS, so it may make sense to restrict something
like this to root or something.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Sven Wegener [Tue, 10 Jun 2008 01:57:42 +0000 (21:57 -0400)]
Btrfs: Invalidate dcache entry after creating snapshot and
We need to invalidate an existing dcache entry after creating a new
snapshot or subvolume, because a negative dache entry will stop us from
accessing the new snapshot or subvolume.
Chris Mason [Mon, 9 Jun 2008 13:35:50 +0000 (09:35 -0400)]
Btrfs: Fix race in running_transaction checks
When a new transaction was started, the code would incorrectly
set the pointer in fs_info before all the data structures were setup.
fsync heavy workloads hit races on the setup of the ordered inode spinlock
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Chris Mason [Sat, 24 May 2008 18:04:53 +0000 (14:04 -0400)]
Btrfs: Allocator fix variety pack
* Force chunk allocation when find_free_extent has to do a full scan
* Record the max key at the start of defrag so it doesn't run forever
* Block groups might not be contiguous, make a forward search for the
next block group in extent-tree.c
* Get rid of extra checks for total fs size
* Fix relocate_one_reference to avoid relocating the same file data block
twice when referenced by an older transaction
* Use the open device count when allocating chunks so that we don't
try to allocate from devices that don't exist
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Chris Mason [Thu, 15 May 2008 13:13:45 +0000 (09:13 -0400)]
Fix corners in writepage and btrfs_truncate_page
The extent_io writepage calls needed an extra check for discarding
pages that started on th last byte in the file.
btrfs_truncate_page needed checks to make sure the page was still part
of the file after reading it, and most importantly, needed to wait for
all IO to the page to finish before freeing the corresponding extents on
disk.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Chris Mason [Mon, 12 May 2008 17:39:03 +0000 (13:39 -0400)]
Btrfs: Handle write errors on raid1 and raid10
When duplicate copies exist, writes are allowed to fail to one of those
copies. This changeset includes a few changes that allow the FS to
continue even when some IOs fail.
It also adds verification of the parent generation number for btree blocks.
This generation is stored in the pointer to a block, and it ensures
that missed writes to are detected.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Chris Mason [Thu, 8 May 2008 20:31:21 +0000 (16:31 -0400)]
Btrfs: A number of nodatacow fixes
Once part of a delalloc request fails the cow checks, just cow the
entire range
It is possible for the back references to all be from the same root,
but still have snapshots against an extent. The checks are now more strict,
forcing cow any time there are multiple refs against the data extent.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Chris Mason [Thu, 8 May 2008 18:11:56 +0000 (14:11 -0400)]
Btrfs: Update nodatacow mode to support cloned single files and resizing
Before, nodatacow only checked to make sure multiple roots didn't have
references on a single extent. This check makes sure that multiple
inodes don't have references.
nodatacow needed an extra check to see if the block group was currently
readonly. This way cows forced by the chunk relocation code are honored.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Chris Mason [Wed, 7 May 2008 15:43:44 +0000 (11:43 -0400)]
Btrfs: Add support for online device removal
This required a few structural changes to the code that manages bdev pointers:
The VFS super block now gets an anon-bdev instead of a pointer to the
lowest bdev. This allows us to avoid swapping the super block bdev pointer
around at run time.
The code to read in the super block no longer goes through the extent
buffer interface. Things got ugly keeping the mapping constant.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Jeff Mahoney [Fri, 2 May 2008 19:03:58 +0000 (15:03 -0400)]
Btrfs: Add workaround for AppArmor changing remove_suid()
In openSUSE 10.3, AppArmor modifies remove_suid to take a struct path
rather than just a dentry. This patch tests that the kernel is openSUSE
10.3 or newer and adjusts the call accordingly.
Debian/Ubuntu with AppArmor applied will also need a similar patch.
Maintainers of btrfs under those distributions should build on this
patch or, alternatively, alter their package descriptions to add
-DREMOVE_SUID_PATH to the compiler command line.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
- --- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ b/compat.h 2008-02-06 16:46:13.000000000 -0500
@@ -0,0 +1,15 @@
+#ifndef _COMPAT_H_
+#define _COMPAT_H_
+
+
+/*
+ * Even if AppArmor isn't enabled, it still has different prototypes.
+ * Add more distro/version pairs here to declare which has AppArmor applied.
+ */
+#if defined(CONFIG_SUSE_KERNEL)
+# if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,22)
+# define REMOVE_SUID_PATH 1
+# endif
+#endif
+
+#endif /* _COMPAT_H_ */
- --- a/file.c 2008-02-06 11:37:39.000000000 -0500
+++ b/file.c 2008-02-06 16:46:23.000000000 -0500
@@ -37,6 +37,7 @@
#include "ordered-data.h"
#include "ioctl.h"
#include "print-tree.h"
+#include "compat.h"
static int btrfs_copy_from_user(loff_t pos, int num_pages, int write_bytes,
@@ -790,7 +791,11 @@ static ssize_t btrfs_file_write(struct f
goto out_nolock;
if (count == 0)
goto out_nolock;
+#ifdef REMOVE_SUID_PATH
+ err = remove_suid(&file->f_path);
+#else
err = remove_suid(fdentry(file));
+#endif
if (err)
goto out_nolock;
file_update_time(file);
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Chris Mason [Wed, 30 Apr 2008 17:59:35 +0000 (13:59 -0400)]
Btrfs: Fixes for 2.6.18 enterprise kernels
2.6.18 seems to get caught in an infinite loop when
cancel_rearming_delayed_workqueue is called more than once, so this switches
to cancel_delayed_work, which is arguably more correct.
Also, balance_dirty_pages can run into problems with 2.6.18 based kernels
because it doesn't have the per-bdi dirty limits. This avoids calling
balance_dirty_pages on the btree inode unless there is actually something
to balance, which is a good optimization in general.
Finally there's a compile fix for ordered-data.h
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Chris Mason [Thu, 24 Apr 2008 18:42:46 +0000 (14:42 -0400)]
Btrfs: Fix balance_level to free the middle block if there is room in the left one
balance level starts by trying to empty the middle block, and then
pushes from the right to the middle. This might empty the right block
and leave a small number of pointers in the middle.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Chris Mason [Fri, 18 Apr 2008 20:11:30 +0000 (16:11 -0400)]
Force page->private removal in btrfs_invalidatepage
btrfs_invalidatepage is not allowed to leave pages around on the lru.
Any such pages will trigger an oops later on because the VM will see
page->private and assume it is a buffer head.
This also forces extra flushes of the async work queues before
dropping all the pages on the btree inode during unmount. Left over
items on the work queues are one possible cause of busy state ranges
during truncate_inode_pages.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
projects / linux-beck.git / log