]> git.karo-electronics.de Git - karo-tx-linux.git/log
karo-tx-linux.git
13 years agoUSB 3.0 Hub Changes
John Youn [Mon, 17 Sep 2001 07:00:00 +0000 (00:00 -0700)]
USB 3.0 Hub Changes

Update the USB core to deal with USB 3.0 hubs.  These hubs have a slightly
different hub descriptor than USB 2.0 hubs, with a fixed (rather than
variable length) size.  Change the USB core's hub descriptor to have a
union for the last fields that differ.  Change the host controller drivers
that access those last fields (DeviceRemovable and PortPowerCtrlMask) to
use the union.

Translate the new version of the hub port status field into the old
version that khubd understands.  (Note: we need to fix it to translate the
roothub's port status once we stop converting it to USB 2.0 hub status
internally.)

Add new code to handle link state change status.  Send out new control
messages that are needed for USB 3.0 hubs, like Set Hub Depth.

This patch is a modified version of the original patch submitted by John
Youn.  It's updated to reflect the removal of the "bitmap" #define, and
change the hub descriptor accesses of a couple new host controller
drivers.

Signed-off-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Cc: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Cc: Tony Olech <tony.olech@elandigitalsystems.com>
Cc: "Robert P. J. Day" <rpjday@crashcourse.ca>
Cc: Max Vozeler <mvz@vozeler.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Cc: Rodolfo Giometti <giometti@linux.it>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Anton Vorontsov <avorontsov@mvista.com>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Lothar Wassmann <LW@KARO-electronics.de>
Cc: Olav Kongas <ok@artecdesign.ee>
Cc: Martin Fuzzey <mfuzzey@gmail.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: David Brownell <dbrownell@users.sourceforge.net>
13 years agoxhci: Remove references to HC_STATE_RUNNING.
Sarah Sharp [Fri, 11 Mar 2011 21:49:55 +0000 (13:49 -0800)]
xhci: Remove references to HC_STATE_RUNNING.

The USB core will set hcd->state to HC_STATE_RUNNING before calling
xhci_run, so there's no point in setting it twice.  The USB core also
doesn't pay attention to HC_STATE_RUNNING on the resume path anymore; it
uses HCD_RH_RUNNING(), which looks at hcd->flags & (1U <<
HCD_FLAG_RH_RUNNING.  Therefore, it's safe to remove the state set in
xhci_bus_resume().

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
13 years agousb: Initialize hcd->state roothubs.
Sarah Sharp [Fri, 11 Mar 2011 21:46:17 +0000 (13:46 -0800)]
usb: Initialize hcd->state roothubs.

We would like to allow host controller drivers to stop using hcd->state.
Unfortunately, some host controller drivers use hcd->state as an
implicit way of telling the core that a controller has died.  The
roothub registration functions must assume the host died if hcd->state
equals HC_STATE_HALT.

To facilitate drivers that don't want to set hcd->state to
HC_STATE_RUNNING in their initialization routines, we set the state to
running before calling the host controller's start function.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
13 years agoxhci: Remove references to HC_STATE_HALT.
Sarah Sharp [Fri, 11 Mar 2011 16:47:33 +0000 (08:47 -0800)]
xhci: Remove references to HC_STATE_HALT.

The xHCI driver doesn't ever test hcd->state for HC_STATE_HALT.  The USB
core recently stopped using it internally, so there's no point in setting
it in the driver.  We still need to set HC_STATE_RUNNING in order to make
it past the USB core's hcd->state check in register_roothub().

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
13 years agoxHCI: prolong host controller halt time limit
Andiry Xu [Thu, 6 Jan 2011 07:43:39 +0000 (15:43 +0800)]
xHCI: prolong host controller halt time limit

xHCI 1.0 spec specifies the xHC shall halt within 16ms after software clears
Run/Stop bit. In xHCI 0.96 spec the time limit is 16 microframes (2ms), it's
too short and often cause dmesg shows "Host controller not halted, aborting
reset." message when rmmod xhci-hcd.

Modify the time limit to comply with xHCI 1.0 specification and prevents the
warning message showing when remove xhci-hcd.

Signed-off-by: Andiry Xu <andiry.xu@amd.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
13 years agoxHCI: Remove redundant variable in xhci_resume()
Andiry Xu [Thu, 6 Jan 2011 07:43:17 +0000 (15:43 +0800)]
xHCI: Remove redundant variable in xhci_resume()

Set hcd->state = HC_STATE_SUSPENDED if there is a power loss during system
resume or the system is hibernated, otherwise leave it be. The variable
old_state is redundant and made an unreachable code path, so remove it.

Signed-off-by: Andiry Xu <andiry.xu@amd.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
13 years agoxhci: Rename variables and reduce register reads.
Sarah Sharp [Wed, 15 Dec 2010 19:56:29 +0000 (11:56 -0800)]
xhci: Rename variables and reduce register reads.

The xhci_bus_suspend() and xhci_bus_resume() functions are a bit hard to
read, because they have an ambiguously named variable "port".  Rename it
to "port_index".  Introduce a new temporary variable, "max_ports" that
holds the maximum number of roothub ports the host controller supports.
This will reduce the number of register reads, and make it easy to change
the maximum number of ports when there are two roothubs.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
13 years agoxhci: Rework port suspend structures for limited ports.
Sarah Sharp [Thu, 9 Dec 2010 22:52:41 +0000 (14:52 -0800)]
xhci: Rework port suspend structures for limited ports.

The USB core only allows up to 31 (USB_MAXCHILDREN) ports under a roothub.
The xHCI driver keeps track of which ports are suspended, which ports have
a suspend change bit set, and what time the port will be done resuming.
It keeps track of the first two by setting a bit in a u32 variable,
suspended_ports or port_c_suspend.  The xHCI driver currently assumes we
can have up to 256 ports under a roothub, so it allocates an array of 8
u32 variables for both suspended_ports and port_c_suspend.  It also
allocates a 256-element array to keep track of when the ports will be done
resuming.

Since we can only have 31 roothub ports, we only need to use one u32 for
each of the suspend state and change variables.  We simplify the bit math
that's trying to index into those arrays and set the correct bit, if we
assume wIndex never exceeds 30.  (wIndex is zero-based after it's
decremented from the value passed in from the USB core.)  Finally, we
change the resume_done array to only hold 31 elements.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: Andiry Xu <andiry.xu@amd.com>
13 years agoUSB: Fix usb_add_hcd() checkpatch errors.
Sarah Sharp [Wed, 1 Dec 2010 17:22:05 +0000 (09:22 -0800)]
USB: Fix usb_add_hcd() checkpatch errors.

The irq enabling code is going to be refactored into a new function, so
clean up some checkpatch errors before moving it.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
13 years agoUSB: Remove bitmap #define from hcd.h
Sarah Sharp [Tue, 30 Nov 2010 23:55:51 +0000 (15:55 -0800)]
USB: Remove bitmap #define from hcd.h

Using a #define to redefine a common variable name is a bad thing,
especially when the #define is in a header.  include/linux/usb/hcd.h
redefined bitmap to DeviceRemovable to avoid typing a long field in the
hub descriptor.  This has unintended side effects for files like
drivers/usb/core/devio.c that include that file, since another header
included after hcd.h has different variables named bitmap.

Remove the bitmap #define and replace instances of it in the host
controller code.  Cleanup the spaces around function calls and square
brackets while we're at it.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Cc: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Cc: Tony Olech <tony.olech@elandigitalsystems.com>
Cc: "Robert P. J. Day" <rpjday@crashcourse.ca>
Cc: Max Vozeler <mvz@vozeler.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Cc: Rodolfo Giometti <giometti@linux.it>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Anton Vorontsov <avorontsov@mvista.com>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Lothar Wassmann <LW@KARO-electronics.de>
Cc: Olav Kongas <ok@artecdesign.ee>
Cc: Martin Fuzzey <mfuzzey@gmail.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: David Brownell <dbrownell@users.sourceforge.net>
13 years agoxhci: Remove old no-op test.
Sarah Sharp [Thu, 21 Oct 2010 19:22:28 +0000 (12:22 -0700)]
xhci: Remove old no-op test.

The test of placing a number of command no-ops on the command ring and
counting the number of no-op events that were generated was only used
during the initial xHCI driver bring up.  This test is no longer used, so
delete it.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
13 years agousb: Always return 0 or -EBUSY to the runtime PM core.
Sarah Sharp [Thu, 30 Dec 2010 06:03:07 +0000 (22:03 -0800)]
usb: Always return 0 or -EBUSY to the runtime PM core.

The PM core reacts badly when the return code from usb_runtime_suspend()
is not 0, -EAGAIN, or -EBUSY.  The PM core regards this as a fatal error,
and refuses to run anymore PM helper functions.  In particular,
usbfs_open() and other usbfs functions will fail because the PM core will
return an error code when usb_autoresume_device() is called.  This causes
libusb and/or lsusb to either hang or segfault.

If a USB device cannot suspend for some reason (e.g. a hub doesn't report
it has remote wakeup capabilities), we still want lsusb and other
userspace programs to work.  So return -EBUSY, which will fill people's
log files with failed tries, but will ensure userspace still works.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
13 years agoUSB: ehci: tegra: Align DMA transfers to 32 bytes
Robert Morell [Thu, 10 Mar 2011 00:28:57 +0000 (16:28 -0800)]
USB: ehci: tegra: Align DMA transfers to 32 bytes

The Tegra2 USB controller doesn't properly deal with misaligned DMA
buffers, causing corruption.  This is especially prevalent with USB
network adapters, where skbuff alignment is often in the middle of a
4-byte dword.

To avoid this, allocate a temporary buffer for the DMA if the provided
buffer isn't sufficiently aligned.

Signed-off-by: Robert Morell <rmorell@nvidia.com>
Signed-off-by: Benoit Goby <benoit@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agousb: host: Add EHCI driver for NVIDIA Tegra SoCs
Benoit Goby [Thu, 10 Mar 2011 00:28:56 +0000 (16:28 -0800)]
usb: host: Add EHCI driver for NVIDIA Tegra SoCs

The Tegra 2 SoC has 3 EHCI compatible USB controllers. This patch adds
the necessary glue to allow the ehci-hcd driver to work on Tegra 2
SoCs.

The platform data is used to configure board-specific phy settings and
to configure the operating mode, as one of the ports may be used as a otg
port. For additional power saving, the driver supports powering down the
phy on bus suspend when it is used, for example, to connect an internal
device that use an out-of-band remote wakeup mechanism (e.g. a gpio).

Signed-off-by: Benoit Goby <benoit@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agoARM: tegra: Add support for Tegra USB PHYs
Benoit Goby [Thu, 10 Mar 2011 00:28:55 +0000 (16:28 -0800)]
ARM: tegra: Add support for Tegra USB PHYs

Interface used by Tegra's gadget driver and ehci driver
to power on and configure the USB PHYs.

Signed-off-by: Benoit Goby <benoit@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agousb: otg: Add ulpi viewport access ops
Benoit Goby [Thu, 10 Mar 2011 00:28:54 +0000 (16:28 -0800)]
usb: otg: Add ulpi viewport access ops

Add generic access ops for controllers with a ulpi viewport register
(e.g. Chipidea/ARC based controllers).

Signed-off-by: Benoit Goby <benoit@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agoUSB: serial: ch341: add new id
wangyanqing [Fri, 11 Mar 2011 14:24:38 +0000 (06:24 -0800)]
USB: serial: ch341: add new id

I picked up a new DAK-780EX(professional digitl reverb/mix system),
which use CH341T chipset to communication with computer on 3/2011
and the CH341T's vendor code is 1a86

Looking up the CH341T's vendor and product id's I see:

1a86  QinHeng Electronics
  5523  CH341 in serial mode, usb to serial port converter

CH341T,CH341 are the products of the same company, maybe
have some common hardware, and I test the ch341.c works
well with CH341T

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agoUSB: Only treat lasting over-current conditions as errors
Paul Bolle [Fri, 11 Mar 2011 17:03:52 +0000 (18:03 +0100)]
USB: Only treat lasting over-current conditions as errors

On a laptop I see these errors on (most) resumes:
    hub 3-0:1.0: over-current change on port 1
    hub 3-0:1.0: over-current change on port 2

Since over-current conditions can disappear quite quickly it's better to
downgrade that message to debug level, recheck for an over-current
condition a little later and only print and over-current condition error
if that condition (still) exists when it's rechecked.

Add similar logic to hub over-current changes. (That code is untested,
as those changes do not occur on this laptop.)

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agoehci-atmel: fix section mismatch warning
Hubert Feurstein [Thu, 10 Mar 2011 09:06:37 +0000 (10:06 +0100)]
ehci-atmel: fix section mismatch warning

Fix the following section mismatch warning:

WARNING: drivers/usb/built-in.o(.data+0x74c): Section mismatch in reference from the variable ehci_atmel_driver to the function .init.text:ehci_atmel_drv_probe()
The variable ehci_atmel_driver references
the function __init ehci_atmel_drv_probe()
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or name the variable:
*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,

Signed-off-by: Hubert Feurstein <h.feurstein@gmail.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agoUSB: serial: ftdi_sio: adding support for OLIMEX ARM-USB-OCD-H
JF Argentino [Wed, 9 Mar 2011 21:13:20 +0000 (22:13 +0100)]
USB: serial: ftdi_sio: adding support for OLIMEX ARM-USB-OCD-H

Adding support for the OLIMEX ARM-USB-OCD-H JTAG device (id 15ba:002b)
based on FTDI FT2232H

Signed-off-by: JF Argentino <jf.argentino@free.fr>
Acked-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agoUSB: serial: option: Apply OPTION_BLACKLIST_SENDSETUP also for ZTE MF626
Herton Ronaldo Krzesinski [Wed, 9 Mar 2011 09:19:48 +0000 (09:19 +0000)]
USB: serial: option: Apply OPTION_BLACKLIST_SENDSETUP also for ZTE MF626

On https://bugs.launchpad.net/ubuntu/+source/linux/+bug/636091, one of
the cases reported is a big timeout on option_send_setup, which causes
some side effects as tty_lock is held. Looks like some of ZTE MF626
devices also don't like the RTS/DTR setting in option_send_setup, like
with 4G XS Stick W14. The reporter confirms which this it solves the
long freezes in his system.

Signed-off-by: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agoUSB OTG Langwell: use simple IPC command to control VBus power.
Hao Wu [Wed, 9 Mar 2011 12:41:08 +0000 (12:41 +0000)]
USB OTG Langwell: use simple IPC command to control VBus power.

Direct access to PMIC register is not safe and will impact battery
charging. New IPC command supported in SCU FW for VBus power control.
USB OTG driver will switch to such commands instead of direct access
to PMIC register for safety and SCU FW will handle the actual work
after got the request(IPC command).

Due to this change, usb driver should wait more time for sync OTGSC
with USBCFG by SCU. Update wait time from 2ms to 5ms.

Signed-off-by: Hao Wu <hao.wu@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agoARM: s3c24xx: Switch to common GPIO controlled UDC pullup implementation
Lars-Peter Clausen [Mon, 7 Mar 2011 07:42:00 +0000 (08:42 +0100)]
ARM: s3c24xx: Switch to common GPIO controlled UDC pullup implementation

Currently all boards using the s3c2410_udc driver use a GPIO to control the
state of the pullup, as a result the same code is reimplemented in each board
This patch changes these boards to use the common implementation for GPIO
controlled pullup in the UDC driver.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agoUSB: s3c2410_udc: Add common implementation for GPIO controlled pullups
Lars-Peter Clausen [Mon, 7 Mar 2011 07:41:59 +0000 (08:41 +0100)]
USB: s3c2410_udc: Add common implementation for GPIO controlled pullups

Currently all boards using the s3c2410_udc driver use a GPIO to control the
state of the pullup, as a result the same code is reimplemented in each board
file.
This patch adds support for using a GPIO to control the pullup state to the udc
driver, so the boards can use a common implementation.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agoarm: omap4: 4430sdp: drop ehci support
Anand Gadiyar [Wed, 16 Feb 2011 11:17:19 +0000 (16:47 +0530)]
arm: omap4: 4430sdp: drop ehci support

Most revisions of the OMAP4 Blaze/SDP platform do not have
the EHCI signals routed by default. The pads are routed
for the alternate HSI functionality instead, and explicit
board modifications are needed to route the signals to
the USB PHY on the board.

Also, turning on the PHY connected to the EHCI port causes
a board reboot during bootup due to an unintended short
on the rails - this affects many initial revisions of the
board, and needs a minor board mod to fix (or as a
workaround, one should not attempt to power on the
USB PHY).

Given that these boards need explicit board mods to even
get EHCI working (separate from the accidental short above),
we should not attempt to enable EHCI by default.

So drop the EHCI support from the board files for the
Blaze/SDP platforms.

Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Cc: Keshava Munegowda <keshava_mgowda@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agoUSB: OHCI: use pci_dev->revision
Sergei Shtylyov [Thu, 3 Mar 2011 18:10:05 +0000 (21:10 +0300)]
USB: OHCI: use pci_dev->revision

Commit ab1666c1364a209e6141d7c14e47a42b5f00eca2 (USB: quirk PLL power down mode)
added code that reads the revision ID from the PCI configuration register while
it's stored by PCI subsystem in the 'revision' field of 'struct pci_dev'...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agoUSB: Rename "msm72k_otg.c" to "msm_otg.c"
Pavankumar Kondeti [Fri, 4 Mar 2011 17:15:02 +0000 (22:45 +0530)]
USB: Rename "msm72k_otg.c" to "msm_otg.c"

This driver is used across all MSM SoCs.  Hence give a generic name.
All Functions and strutures are also using "msm_otg" as prefix.

Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agousb/isp1760: Fix crash when unplugging bug
Arvid Brodin [Mon, 7 Mar 2011 14:36:21 +0000 (15:36 +0100)]
usb/isp1760: Fix crash when unplugging bug

This fixes a problem with my previous patch series where there's a great
risk that the kernel will crash when unplugging interrupt devices from
the USB port. These lines must have got missing when I rebased the
patches from the older kernel I was working with to 2.6.37 and 2.6-next:

This fixes a bug where the kernel may crash if you unplug a USB device
that has active interrupt transfers.

Signed-off-by: Arvid Brodin <arvid.brodin@enea.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agoUSB: move usbcore away from hcd->state
Alan Stern [Mon, 7 Mar 2011 16:11:52 +0000 (11:11 -0500)]
USB: move usbcore away from hcd->state

The hcd->state variable is a disaster.  It's not clearly owned by
either usbcore or the host controller drivers, and they both change it
from time to time, potentially stepping on each other's toes.  It's
not protected by any locks.  And there's no mechanism to prevent it
from going through an invalid transition.

This patch (as1451) takes a first step toward fixing these problems.
As it turns out, usbcore uses hcd->state for essentially only two
things: checking whether the controller's root hub is running and
checking whether the controller has died.  Therefore the patch adds
two new atomic bitflags to the hcd structure, to store these pieces of
information.  The new flags are used only by usbcore, and a private
spinlock prevents invalid combinations (a dead controller's root hub
cannot be running).

The patch does not change the places where usbcore sets hcd->state,
since HCDs may depend on them.  Furthermore, there is one place in
usb_hcd_irq() where usbcore still must use hcd->state: An HCD's
interrupt handler can implicitly indicate that the controller died by
setting hcd->state to HC_STATE_HALT.  Nevertheless, the new code is a
big improvement over the current code.

The patch makes one other change.  The hcd_bus_suspend() and
hcd_bus_resume() routines now check first whether the host controller
has died; if it has then they return immediately without calling the
HCD's bus_suspend or bus_resume methods.

This fixes the major problem reported in Bugzilla #29902: The system
fails to suspend after a host controller dies during system resume.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Alex Terekhov <a.terekhov@gmail.com>
CC: <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agoUSB: Remove unused timeout from io_edgeport.c
Huzaifa Sidhpurwala [Wed, 2 Mar 2011 06:29:26 +0000 (11:59 +0530)]
USB: Remove unused timeout from io_edgeport.c

timeout variable is not used anywhere in int write_cmd_usb, remove it

Signed-off-by: Huzaifa Sidhpurwala <huzaifas@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agoUSB: Remove unused is_iso from fsl_udc_core.c
Huzaifa Sidhpurwala [Wed, 2 Mar 2011 06:23:00 +0000 (11:53 +0530)]
USB: Remove unused is_iso from fsl_udc_core.c

is_iso variable is not used anywhere, remove it

Signed-off-by: Huzaifa Sidhpurwala <huzaifas@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agoUSB: Remove delay_t unused variable from sierra_ms.c driver initialisation code
Huzaifa Sidhpurwala [Wed, 2 Mar 2011 05:47:49 +0000 (11:17 +0530)]
USB: Remove delay_t unused variable from sierra_ms.c driver initialisation code

trivial patch to remove unused delay_t varible

Signed-off-by: Huzaifa Sidhpurwala <huzaifas@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agousb-gadget: fix warning in ethernet
Stephen Hemminger [Wed, 2 Mar 2011 06:40:57 +0000 (22:40 -0800)]
usb-gadget: fix warning in ethernet

Driver was taking max() of a size_t and u32 which causes complaint
about comparison of different types.

Stumbled on this accidently in my config, never used.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agowusb: fix find_first_zero_bit() return value check
Akinobu Mita [Wed, 2 Mar 2011 11:35:28 +0000 (20:35 +0900)]
wusb: fix find_first_zero_bit() return value check

In wusb_cluster_id_get(), if no zero bits exist in wusb_cluster_id_table,
find_first_zero_bit() returns CLUSTER_IDS.

But it is impossible to detect that the bitmap is full because there
is an off-by-one error in the return value check.  It will cause
unexpected memory access by setting bit out of wusb_cluster_id_table
bitmap, and caller will get wrong cluster id.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: linux-usb@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agousb: EHCI, OHCI: Add configuration for the SH USB controller
Yoshihiro Shimoda [Tue, 1 Mar 2011 07:58:37 +0000 (16:58 +0900)]
usb: EHCI, OHCI: Add configuration for the SH USB controller

The SH EHCI/OHCI driver hardcoded the CPU type in {ehci,ohci}-hcd.c.
So if we will add the new CPU, we had to add to the hcd driver each time.
The patch adds the CONFIG_USB_{EHCI,OHCI}_SH configuration. So if we
want to use the SH EHCI/OHCI, we only enable the configuration.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agoUSB host: Move AMD PLL quirk to pci-quirks.c
Andiry Xu [Tue, 1 Mar 2011 06:57:05 +0000 (14:57 +0800)]
USB host: Move AMD PLL quirk to pci-quirks.c

This patch moves the AMD PLL quirk code in OHCI/EHCI driver to pci-quirks.c,
and exports the functions to be used by xHCI driver later.

AMD PLL quirk disable the optional PM feature inside specific
SB700/SB800/Hudson-2/3 platforms under the following conditions:

1. If an isochronous device is connected to OHCI/EHCI/xHCI port and is active;
2. Optional PM feature that powers down the internal Bus PLL when the link is
   in low power state is enabled.

Without AMD PLL quirk, USB isochronous stream may stutter or have breaks
occasionally, which greatly impair the performance of audio/video streams.

Currently AMD PLL quirk is implemented in OHCI and EHCI driver, and will be
added to xHCI driver too. They are doing similar things actually, so move
the quirk code to pci-quirks.c, which has several advantages:

1. Remove duplicate defines and functions in OHCI/EHCI (and xHCI) driver and
   make them cleaner;
2. AMD chipset information will be probed only once and then stored.
   Currently they're probed during every OHCI/EHCI initialization, move
   the detect code to pci-quirks.c saves the repeat detect cost;
3. Build up synchronization among OHCI/EHCI/xHCI driver. In current
   code, every host controller enable/disable PLL only according to
   its own status, and may enable PLL while there is still isoc transfer on
   other HCs. Move the quirk to pci-quirks.c prevents this issue.

Signed-off-by: Andiry Xu <andiry.xu@amd.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Alex He <alex.he@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agoarm: omap: usb: clock entries for omap3 and omap4
Keshava Munegowda [Tue, 1 Mar 2011 14:38:22 +0000 (20:08 +0530)]
arm: omap: usb: clock entries for omap3 and omap4

The devices of clocks are set to usbhs, so that
only usbhs common driver can invoke these clocks.
The dummy per port clocks are added to omap3
clock data base. This helps to invoke common
clock get APIs for omap3 and omap4.

Signed-off-by: Keshava Munegowda <keshava_mgowda@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
13 years agousb: host: omap: ehci and ohci simplification
Keshava Munegowda [Tue, 1 Mar 2011 14:38:21 +0000 (20:08 +0530)]
usb: host: omap: ehci and ohci simplification

The ehci and ohci drivers are simplified; Since
UHH and TLL initialization, clock handling are
done by common usbhs core driver, these functionalities
are removed from ehci and ohci drivers.

Signed-off-by: Keshava Munegowda <keshava_mgowda@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
13 years agoarm: omap: usb: cleanup ehci and ohci resources and devices
Keshava Munegowda [Tue, 1 Mar 2011 14:38:20 +0000 (20:08 +0530)]
arm: omap: usb: cleanup ehci and ohci resources and devices

The prototype and defination of functions usb_ehci_init and
usb_ohci_init are removed. The ehci and ohci devices are
removed since usbhs device contains both ehci and ohci details.

Signed-off-by: Keshava Munegowda <keshava_mgowda@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
13 years agoarm: omap: usb: Invoke usbhs core device initialization
Keshava Munegowda [Tue, 1 Mar 2011 14:38:19 +0000 (20:08 +0530)]
arm: omap: usb: Invoke usbhs core device initialization

The usbhs intialization is invoked by all omap3 and omap4
variant board files.

Signed-off-by: Keshava Munegowda <keshava_mgowda@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
13 years agoarm: omap: usb: usbhs core device initialization
Keshava Munegowda [Tue, 1 Mar 2011 14:38:18 +0000 (20:08 +0530)]
arm: omap: usb: usbhs core device initialization

A new usbhs platform device is defined;
this device will be the parent device of ehci and
ohci platform devices. the usbhs_init function
is defined which does the usbhs device initialization
and I/O mux of ehci and ohci.

Signed-off-by: Keshava Munegowda <keshava_mgowda@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
13 years agousb: host: omap: common usb host core driver
Keshava Munegowda [Tue, 1 Mar 2011 14:38:17 +0000 (20:08 +0530)]
usb: host: omap: common usb host core driver

enabling and disabling the common clocks for ehci
and ohci is implemented. usbhs is a common parent
platform driver for EHCI and OHCI driver. This driver
receives the clock enable and disable requests
from ehci and ohci drivers.The UHH and TLL
initialization is also performed.

Signed-off-by: Keshava Munegowda <keshava_mgowda@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
13 years agoarm: omap: usb: create common enums and structures for ehci and ohci
Keshava Munegowda [Tue, 1 Mar 2011 14:38:16 +0000 (20:08 +0530)]
arm: omap: usb: create common enums and structures for ehci and ohci

Create the ehci and ohci specific platform data structures.
The port enum values are made common for both ehci and ohci.

Signed-off-by: Keshava Munegowda <keshava_mgowda@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
13 years agoarm: omap2: usb: rename usb-ehci.c to usb-host.c
Felipe Balbi [Tue, 1 Mar 2011 14:38:15 +0000 (20:08 +0530)]
arm: omap2: usb: rename usb-ehci.c to usb-host.c

We already have both EHCI and OHCI there, so let's
rename to be sure everybody will understand the entire
USB HOST functionality is setup on this file.

Signed-off-by: Felipe Balbi <balbi@ti.com>
13 years agousb: host: omap: switch to platform_get_resource_byname
Felipe Balbi [Tue, 1 Mar 2011 14:38:14 +0000 (20:08 +0530)]
usb: host: omap: switch to platform_get_resource_byname

now that we have names on all memory bases, we can
switch to use platform_get_resource_byname() which
will make it simpler when we move to a setup where
OHCI and EHCI on OMAP play well together.

Signed-off-by: Felipe Balbi <balbi@ti.com>
13 years agoarm: omap: usb: host: add names to resources
Felipe Balbi [Tue, 1 Mar 2011 14:38:13 +0000 (20:08 +0530)]
arm: omap: usb: host: add names to resources

add names to EHCI and OHCI resources. That will help us
identify the resource correctly when moving to a setup
where OHCI and EHCI play well together.

Signed-off-by: Felipe Balbi <balbi@ti.com>
13 years agousb: ehci: omap: add support for TLL mode on OMAP4
Anand Gadiyar [Wed, 16 Feb 2011 10:13:14 +0000 (15:43 +0530)]
usb: ehci: omap: add support for TLL mode on OMAP4

The EHCI controller in OMAP4 supports a transceiver-less link
mode (TLL mode), similar to the one in OMAP3. On the OMAP4
however, there are an additional set of clocks that need
to be turned on to get this working.

Request and configure these for each port if that port
is connected in TLL mode.

Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
13 years agousb: musb: tusb: Fix possible null pointer dereference in tusb6010_omap.c
Huzaifa Sidhpurwala [Tue, 1 Mar 2011 10:24:22 +0000 (15:54 +0530)]
usb: musb: tusb: Fix possible null pointer dereference in tusb6010_omap.c

tusb_dma was being dereferenced when it was nul

Signed-off-by: Huzaifa Sidhpurwala <huzaifas@redhat.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
13 years agousb: musb: OMAP3xxx: Fix device detection in otg & host mode
Hema HK [Mon, 28 Feb 2011 09:35:29 +0000 (15:05 +0530)]
usb: musb: OMAP3xxx: Fix device detection in otg & host mode

In OMAP3xxx with OTG mode or host only mode, When the device
is inserted after the gadget driver loading the enumeration was not
through. This is because the mentor controller will start sensing the
ID PIN only after setting the session bit.
So after ID-GND, need to set the session bit for mentor to get it
configured as A device.

This is a fix to set the session bit again in ID_GND notification handler.
Tested with OMAP3630Zoom3 platform.

Signed-off-by: Hema HK <hemahk@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
13 years agousb: musb: OMAP4430: Power down the PHY during board init
Hema HK [Mon, 28 Feb 2011 08:49:35 +0000 (14:19 +0530)]
usb: musb: OMAP4430: Power down the PHY during board init

Powerdown the internal PHY during board init for OMAP44xx.
So that when musb is disabled core transition to retention/off
is not blocked.

Signed-off-by: Hema HK <hemahk@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
13 years agousb: otg: OMAP4430: Save/restore the context
Hema HK [Mon, 28 Feb 2011 08:49:36 +0000 (14:19 +0530)]
usb: otg: OMAP4430: Save/restore the context

Add the context save/restore for the control module register
used for OMAP4430 musb with UTMI embedded PHY interface.

Signed-off-by: Hema HK <hemahk@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
13 years agousb: otg: TWL4030: Update the last_event variable.
Hema HK [Mon, 28 Feb 2011 08:49:32 +0000 (14:19 +0530)]
usb: otg: TWL4030: Update the last_event variable.

Update the last_event variable of otg_transceiver. This will be used in
the musb platform glue driver for runtime idling the device.

Signed-off-by: Hema HK <hemahk@ti.com>
Cc: Felipe Balbi <balbi@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
13 years agousb: musb: Idle path retention and offmode support for OMAP3
Hema HK [Mon, 28 Feb 2011 08:49:34 +0000 (14:19 +0530)]
usb: musb: Idle path retention and offmode support for OMAP3

This patch supports the retention and offmode support in the idle path for
musb driver using runtime pm APIs.

This is restricted to support offmode and retention only when device not
connected.When device/cable connected with gadget driver loaded,configured
to no idle/standby which will not allow the core transition to retention
or off.

There is no context save/restore done by hardware for musb in OMAP3
and OMAP4,driver has to take care of saving and restoring the context
during offmode.

Musb has a requirement of configuring sysconfig register to force
idle/standby mode and set the ENFORCE bit in module STANDBY register
for retention and offmode support.

Runtime pm and hwmod frameworks will take care of configuring to force
idle/standby when pm_runtime_put_sync is called and back to no
idle/standby when pm_runeime_get_sync is called.

Compile, boot tested and also tested the retention in the idle path on
OMAP3630Zoom3. And tested the global suspend/resume with offmode enabled.
Usb basic functionality tested on OMAP4430SDP.

There is some problem with idle path offmode in mainline, I could not test
with offmode. But I have tested this patch with resetting the controller
in the idle path when wakeup from retention just to make sure that the
context is lost, and restore path is working fine.

Removed .suspend/.resume fnction pointers and functions because there
is no need of having these functions as all required work is done
at runtime in the driver.

There is no need to call the runtime pm api with glue driver device
as glue layer device is the parent of musb core device, when runtime apis
are called for the child, parent device runtime functionality
will be invoked.

Design overview:

pm_runtime_get_sync: When called with musb core device takes care of
enabling the clock, calling runtime callback function of omap2430 glue
layer, runtime call back of musb driver and configure the musb sysconfig
to no idle/standby

pm_runtime_put: Takes care of calling runtime callback function of omap2430
glue layer, runtime call back of musb driver, Configure the musb sysconfig
to force idle/standby and disable the clock.

During musb driver load: Call pm_runtime_get_sync.

End of musb driver load: Call pm_runtime_put

During gadget driver load: Call pm_runtime_get_sync,
End of gadget driver load: Call pm_runtime_put if there is no device
or cable is connected.

During unload of the gadget driver:Call pm_runtime_get_sync if cable/device
is not connected.
End of the gadget driver unload : pm_runtime_put

During unload of musb driver : Call pm_runtime_get_sync
End of unload: Call pm_runtime_put

On connect of usb cable/device -> transceiver notification(VBUS and ID-GND):
pm_runtime_get_sync only if the gadget driver loaded.

On disconnect of the cable/device -> Disconnect Notification:
pm_runtime_put if the gadget driver is loaded.

Signed-off-by: Hema HK <hemahk@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
13 years agousb: musb: Remove platform context save/restore API
Hema HK [Mon, 28 Feb 2011 08:49:33 +0000 (14:19 +0530)]
usb: musb: Remove platform context save/restore API

For OMAP3 and OMAP4 for offmode and retention support, musb
sysconfig is configured to force idle and standby with ENABLE_FORCE bit
of OTG_FORCESTNDBY set.
And on wakeup configure to no ilde/standby with resetting the ENABLE_FORCE
bit. There is not need to save and restore of this register anymore
so removed omap2430_save_context/omap2430_restore_context functions.
and also removed otg_forcestandby member of musb_context_registers
structure

Signed-off-by: Hema HK <hemahk@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
13 years agousb: musb: gadget: fix list_head usage
Felipe Balbi [Mon, 28 Feb 2011 08:44:50 +0000 (10:44 +0200)]
usb: musb: gadget: fix list_head usage

commit ad1adb89a0d9410345d573b6995a1fa9f9b7c74a
(usb: musb: gadget: do not poke with gadget's list_head)
fixed a bug in musb where it was corrupting the list_head
which is supposed to be used by gadget drivers. While
doing that, I forgot to fix the usage in musb_gadget_dequeue()
method. Fix that.

Reported-by: Pavol Kurina <pavol.kurina@emsys.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
13 years agoUSB: ffs-test: fix header path
Davidlohr Bueso [Sun, 27 Feb 2011 07:58:48 +0000 (04:58 -0300)]
USB: ffs-test: fix header path

When compiling this program the functionfs.h header cannot be found, producing:
ffs-test.c:40: fatal error: linux/usb/functionfs.h: No such file or directory

This patch also fixes the following warning:
ffs-test.c:453: warning: format ‘%4d’ expects type ‘int’, but argument 3 has type ‘size_t’

Signed-off-by: Davidlohr Bueso <dave@gnu.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agoUSB: serial/kobil_sct, fix potential tty NULL dereference
Jiri Slaby [Mon, 28 Feb 2011 09:34:06 +0000 (10:34 +0100)]
USB: serial/kobil_sct, fix potential tty NULL dereference

Make sure that we check the return value of tty_port_tty_get.
Sometimes it may return NULL and we later dereference that.

The only place here is in kobil_read_int_callback, so fix it.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Alan Cox <alan@linux.intel.com>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agoUSB: serial/keyspan_pda, fix potential tty NULL dereferences
Jiri Slaby [Mon, 28 Feb 2011 09:34:05 +0000 (10:34 +0100)]
USB: serial/keyspan_pda, fix potential tty NULL dereferences

Make sure that we check the return value of tty_port_tty_get.
Sometimes it may return NULL and we later dereference that.

There are several places to check. For easier handling,
tty_port_tty_get is moved directly to the palce where needed in
keyspan_pda_rx_interrupt.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agousb/isp1760: Handle toggle bit in queue heads only
Arvid Brodin [Sat, 26 Feb 2011 21:08:47 +0000 (22:08 +0100)]
usb/isp1760: Handle toggle bit in queue heads only

Remove redundant "toggle" member from struct isp1760_qtd, and store toggle
status in struct isp1760_qh only.

Signed-off-by: Arvid Brodin <arvid.brodin@enea.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agousb/isp1760: Replace period calculation for INT packets with something readable
Arvid Brodin [Sat, 26 Feb 2011 21:07:35 +0000 (22:07 +0100)]
usb/isp1760: Replace period calculation for INT packets with something readable

Replace the period calculation for INT packets with something readable. Seems
to fix a rare bug with quickly repeated insertion/removal of several USB
devices simultaneously (hub control INT packets).

Signed-off-by: Arvid Brodin <arvid.brodin@enea.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agousb/isp1760: Consolidate printouts and remove unused code
Arvid Brodin [Sat, 26 Feb 2011 21:06:37 +0000 (22:06 +0100)]
usb/isp1760: Consolidate printouts and remove unused code

Consolidate printouts to use dev_XXX functions instead of an assortment of
printks and driver specific macros. Remove some unused code snippets and struct
members. Remove some unused function parameters and #defines. Change the
"queue_entry" variable name which has different but related meanings in
different places and use "slot" only.

Signed-off-by: Arvid Brodin <arvid.brodin@enea.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agousb/isp1760: Remove redundant "data_buffer" member from struct inter_packet_info
Arvid Brodin [Sat, 26 Feb 2011 21:05:26 +0000 (22:05 +0100)]
usb/isp1760: Remove redundant "data_buffer" member from struct inter_packet_info

Signed-off-by: Arvid Brodin <arvid.brodin@enea.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agousb/isp1760: Clean up payload address handling
Arvid Brodin [Sat, 26 Feb 2011 21:04:40 +0000 (22:04 +0100)]
usb/isp1760: Clean up payload address handling

Encapsulate payload addresses within qtds.

Signed-off-by: Arvid Brodin <arvid.brodin@enea.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agousb/isp1760: Remove redundant variables and defines
Arvid Brodin [Sat, 26 Feb 2011 21:03:49 +0000 (22:03 +0100)]
usb/isp1760: Remove redundant variables and defines

Removes the redundant hw_next list pointer from struct isp1760_qtd, removes some
unused #defines, removes redundant "urb" member from struct inter_packet_info.

Signed-off-by: Arvid Brodin <arvid.brodin@enea.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agousb/isp1760: Move to native-endian ptds
Arvid Brodin [Sat, 26 Feb 2011 21:02:57 +0000 (22:02 +0100)]
usb/isp1760: Move to native-endian ptds

This helps users with platform-bus-connected isp176xs, big-endian cpu,
and missing byteswapping on the data bus. It does so by collecting all
SW byteswaps in one place and also fixes a bug with non-32-bit io
transfers on this hardware, where payload has to be byteswapped
instead of ptds.

Signed-off-by: Arvid Brodin <arvid.brodin@enea.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agousb: core: hub.c Remove one to many n's in a word.
Justin P. Mattock [Sun, 27 Feb 2011 04:33:56 +0000 (20:33 -0800)]
usb: core: hub.c Remove one to many n's in a word.

The Patch below removes one to many "n's" in a word..

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
CC: Alan Stern <stern@rowland.harvard.edu>
CC: linux-usb@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agousb: host: uhci-hcd.c Remove one to many n's in a word.
Justin P. Mattock [Sun, 27 Feb 2011 04:33:57 +0000 (20:33 -0800)]
usb: host: uhci-hcd.c Remove one to many n's in a word.

The Patch below removes one to many "n's" in a word..

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
CC: Alan Stern <stern@rowland.harvard.edu>
CC: linux-usb@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agodrivers:uwb:scan.c remove one to many l's in the word.
Justin P. Mattock [Fri, 25 Feb 2011 06:13:09 +0000 (22:13 -0800)]
drivers:uwb:scan.c remove one to many l's in the word.

The patch below removes an extra "l" in the word.

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agodrivers:usb:wusbhc.h remove one to many l's in the word.
Justin P. Mattock [Fri, 25 Feb 2011 06:11:55 +0000 (22:11 -0800)]
drivers:usb:wusbhc.h remove one to many l's in the word.

The patch below removes an extra "l" in the word.

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agoUSB: opticon: add rts and cts support
Martin Jansen [Thu, 24 Feb 2011 13:50:16 +0000 (14:50 +0100)]
USB: opticon: add rts and cts support

Add support for RTS and CTS line status

Signed-off-by: Martin Jansen <martin.jansen@opticon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agoUSB: fix unsafe USB_SS_MAX_STREAMS() definition
Dmitry Torokhov [Wed, 23 Feb 2011 22:38:20 +0000 (14:38 -0800)]
USB: fix unsafe USB_SS_MAX_STREAMS() definition

Macro arguments used in expressions need to be enclosed in parenthesis
to avoid unpleasant surprises.

Signed-off-by: Dmitry Torokhov <dtor@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agoUSB: serial drivers need to use larger bulk-in buffers
Alan Stern [Wed, 23 Feb 2011 20:28:18 +0000 (15:28 -0500)]
USB: serial drivers need to use larger bulk-in buffers

When a driver doesn't know how much data a device is going to send,
the buffer size should be at least as big as the endpoint's maxpacket
value.  The serial drivers don't follow this rule; many of them
request only 256-byte bulk-in buffers.  As a result, they suffer
overflow errors if a high-speed device wants to send a lot of data,
because high-speed bulk endpoints are required to have a maxpacket
size of 512.

This patch (as1450) fixes the problem by using the driver's
bulk_in_size value as a minimum, always allocating buffers no smaller
than the endpoint's maxpacket size.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Flynn Marquardt <flynn@flynnux.de>
CC: <stable@kernel.org> [after .39-rc1 is out]
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agoUSB: EHCI bus glue for on-chip PMC MSP USB controller
Anoop [Thu, 24 Feb 2011 13:56:28 +0000 (19:26 +0530)]
USB: EHCI bus glue for on-chip PMC MSP USB controller

This patch add bus glue for USB controller commonly found in PMC-Sierra MSP71xx family of SoC's.

Signed-off-by: Anoop P A <anoop.pa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agousb: gadget: composite: fix req->length in composite_setup()
Maulik Mankad [Tue, 22 Feb 2011 13:38:42 +0000 (19:08 +0530)]
usb: gadget: composite: fix req->length in composite_setup()

When USB CV MSC tests are run on f_mass_storage gadget
Bulk Only Mass Storage Reset fails since req->length
is set to USB_BUFSIZ=1024 in composite_setup().

Initialize req->length to zero to fix this.

Signed-off-by: Maulik Mankad <maulik@ti.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agoUSB: use "device number" instead of "address"
Alan Stern [Tue, 22 Feb 2011 14:53:41 +0000 (09:53 -0500)]
USB: use "device number" instead of "address"

The USB stack historically has conflated device numbers (i.e., the
value of udev->devnum) with device addresses.  This is understandable,
because until recently the two values were always the same.

But with USB-3.0 they aren't the same, so we should start calling
these things by their correct names.  This patch (as1449b) changes many
of the references to "address" in the hub driver to "device number"
or "devnum".

The patch also removes some unnecessary or misleading comments.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Luben Tuikov <ltuikov@yahoo.com>
Reviewed-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agoUSB: f_phonet: avoid pskb_pull(), fix OOPS with CONFIG_HIGHMEM
Rémi Denis-Courmont [Mon, 21 Feb 2011 14:16:53 +0000 (16:16 +0200)]
USB: f_phonet: avoid pskb_pull(), fix OOPS with CONFIG_HIGHMEM

This is similar to what we already do in cdc-phonet.c in the same
situation.

Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agoUSB: EHCI: Fix compiler warnings with MSM driver
Pavankumar Kondeti [Fri, 18 Feb 2011 12:00:11 +0000 (17:30 +0530)]
USB: EHCI: Fix compiler warnings with MSM driver

This patch fixes the following compile warnings

drivers/usb/host/ehci-dbg.c:45: warning: 'dbg_hcs_params' defined but not used
drivers/usb/host/ehci-dbg.c:89: warning: 'dbg_hcc_params' defined but not used

Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agoUSB: gadget: Add test mode support for ci13xxx_udc
Pavankumar Kondeti [Fri, 18 Feb 2011 12:13:18 +0000 (17:43 +0530)]
USB: gadget: Add test mode support for ci13xxx_udc

Implement the test modes mentioned in 7.1.20 section of USB 2.0
specification.  High-speed capable devices must support these test
modes to facilitate compliance testing.

Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agoUSB: gadget: Implement remote wakeup in ci13xxx_udc
Pavankumar Kondeti [Fri, 18 Feb 2011 12:13:17 +0000 (17:43 +0530)]
USB: gadget: Implement remote wakeup in ci13xxx_udc

This patch adds support for remote wakeup.  The following things
are handled:

- Process SET_FEATURE/CLEAR_FEATURE control requests sent by host
for enabling/disabling remote wakeup feature.
- Report remote wakeup enable status in response to GET_STATUS
control request.
- Implement wakeup method defined in usb_gadget_ops for initiating
remote wakeup.
- Notify gadget driver about suspend and resume.

Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agoUSB: gadget: Implement hardware queuing in ci13xxx_udc
Pavankumar Kondeti [Fri, 18 Feb 2011 12:13:16 +0000 (17:43 +0530)]
USB: gadget: Implement hardware queuing in ci13xxx_udc

Chipidea USB controller provides a means (Add dTD TripWire semaphore)
for safely adding a new dTD to an active endpoint's linked list.  Make
use of this feature to improve performance.  Dynamically allocate and
free dTD for supporting zero length packet termination.  Honor
no_interrupt flag set by gadget drivers.

Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agoUSB: serial: mos7720: Fix possible null pointer dereference
Huzaifa Sidhpurwala [Mon, 21 Feb 2011 07:28:45 +0000 (12:58 +0530)]
USB: serial: mos7720: Fix possible null pointer dereference

Signed-off-by: Huzaifa Sidhpurwala <huzaifas@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agoUSB: serial: keyspan: Fix possible null pointer dereference.
Huzaifa Sidhpurwala [Mon, 21 Feb 2011 07:28:44 +0000 (12:58 +0530)]
USB: serial: keyspan: Fix possible null pointer dereference.

Signed-off-by: Huzaifa Sidhpurwala <huzaifas@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agousb: m66592-udc: Fixed bufnum of Bulk
Yusuke Goda [Mon, 21 Feb 2011 03:55:32 +0000 (12:55 +0900)]
usb: m66592-udc: Fixed bufnum of Bulk

Signed-off-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agoehci: Check individual port status registers on resume
Matthew Garrett [Tue, 11 Jan 2011 17:26:48 +0000 (12:26 -0500)]
ehci: Check individual port status registers on resume

If a device plug/unplug is detected on an ATI SB700 USB controller in D3,
it appears to set the port status register but not the controller status
register. As a result we'll fail to detect the plug event. Check the port
status register on resume as well in order to catch this case.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Cc: stable <stable@kernel.org> [after .39-rc1 is out]
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agousb: musb: gadget: DBG() already prints function name
Sergei Shtylyov [Fri, 18 Feb 2011 20:44:32 +0000 (23:44 +0300)]
usb: musb: gadget: DBG() already prints function name

In the gadget code, there are several DBG() macro invocations that explicitly
print the calling function's name while DBG() macro itself does this anyway;
most of these were added by commit f11d893de444965dfd3e55f726533ae1df5c6471
(usb: musb: support ISO high bandwidth for gadget mode). Remove the duplicated
printing, somewhat clarifying the messages at the same time...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
13 years agousb: otg: notifier: switch to atomic notifier
Felipe Balbi [Wed, 29 Sep 2010 07:55:49 +0000 (10:55 +0300)]
usb: otg: notifier: switch to atomic notifier

most of our notifications, will be called from IRQ
context, so an atomic notifier suits the job better.

Signed-off-by: Felipe Balbi <balbi@ti.com>
13 years agousb: musb: OMAP4430: Fix usb device detection if connected during boot
Hema HK [Thu, 17 Feb 2011 06:36:10 +0000 (12:06 +0530)]
usb: musb: OMAP4430: Fix usb device detection if connected during boot

OMAP4430 is embedded with UTMI PHY. This PHY does not support the
OTG features like ID pin detection and VBUS detection. This function
is exported to an external companion chip TWL6030. Software must retrieve
the OTG HNP and SRP status from the TWL6030 and configure the bits inside
the control module that drive the related USBOTGHS UTMI interface signals.
It must also read back the UTMI signals needed to configure the TWL6030
OTG module.

Can find more details in the TRM[1].
[1]:http://focus.ti.com/pdfs/wtbu/OMAP4430_ES2.0_Public_TRM_vJ.pdf

In OMAP4430 musb driver VBUS and ID notifications are received from the
transceiver driver. If the cable/device is connected during boot,
notifications from transceiver driver will be missed till musb driver
is loaded.
Patch to configure the transceiver in the platform_enable/disable
functions and enable the vbus in the gadget driver based on the
last_event of the otg_transceiver.

Signed-off-by: Hema HK <hemahk@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
13 years agousb: otg: TWL6030 Save the last event in otg_transceiver
Hema HK [Thu, 17 Feb 2011 06:36:09 +0000 (12:06 +0530)]
usb: otg: TWL6030 Save the last event in otg_transceiver

Save the last event in the otg_transceiver so that it can used in the
musb driver and gadget driver to configure the musb and enable the
vbus for host mode and OTG mode, if the device is connected during boot.

Signed-off-by: Hema HK <hemahk@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
13 years agousb: otg: TWL6030: Introduce the twl6030_phy_suspend function.
Hema HK [Thu, 17 Feb 2011 06:36:08 +0000 (12:06 +0530)]
usb: otg: TWL6030: Introduce the twl6030_phy_suspend function.

Introduce the twl6030_phy_suspend function and assign to otg.set_suspend
function pointer.
This function is used by the musb-omap2430 platform driver
during suspend/resume.

Signed-off-by: Hema HK <hemahk@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
13 years agousb: otg: OMAP4430: Introducing suspend function for power management
Hema HK [Thu, 17 Feb 2011 06:36:07 +0000 (12:06 +0530)]
usb: otg: OMAP4430: Introducing suspend function for power management

Introduced the suspend/resume function for the OMAP4430 internal PHY.
This will be used by the twl6030-usb transceiver driver.
Moved the clock enable/disable function calls and power on/off of the PHY
code from power on/off functions to suspend/resume function.

Pass the suspend function through board data for OMAP4430sdp and OMAP4panda.
This will be used by the twl6030-usb transceiver driver.

Signed-off-by: Hema HK <hemahk@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
13 years agousb: otg: OMAP4430: Add phy_suspend function pointer to twl4030_usb_data
Hema HK [Thu, 17 Feb 2011 06:36:06 +0000 (12:06 +0530)]
usb: otg: OMAP4430: Add phy_suspend function pointer to twl4030_usb_data

Declare the .phy_suspend function pointer to twl4030_usb_data structure.
OMAP internal phy suspend function will be hooked though this function
pointer to use in the transceiver driver.

Signed-off-by: Hema HK <hemahk@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
13 years agousb: otg: Remove one unnecessary I2C read request.
Hema HK [Thu, 17 Feb 2011 06:36:05 +0000 (12:06 +0530)]
usb: otg: Remove one unnecessary I2C read request.

To get the ID status there was an I2C read transfer. Removed this I2C
read transfer as this info can be used from existing variable(linkstat).

Signed-off-by: Hema HK <hemahk@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
13 years agousb: otg: enable regulator only on cable/device connect
Hema HK [Thu, 17 Feb 2011 06:36:04 +0000 (12:06 +0530)]
usb: otg: enable regulator only on cable/device connect

Remove the regulator enable while driver loading and enable it only when
the cable/device is connected and disable it when disconnected.

Remove the configuration of config_state and config_trans register
configuration as these registers are programmed when regulator
enable/disable is called.

Signed-off-by: Hema HK <hemahk@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
13 years agousb: musb: Using runtime pm APIs for musb.
Hema HK [Thu, 17 Feb 2011 06:37:22 +0000 (12:07 +0530)]
usb: musb: Using runtime pm APIs for musb.

Calling runtime pm APIs pm_runtime_put_sync() and pm_runtime_get_sync()
for enabling/disabling the clocks, sysconfig settings.

Enable clock, configure no-idle/standby when active and configure force idle/standby
and disable clock when idled. This is taken care by the runtime framework when
driver calls the pm_runtime_get_sync and pm_runtime_put_sync APIs.
Need to configure MUSB into force standby and force idle mode when usb not used

Signed-off-by: Hema HK <hemahk@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
Cc: Cousson, Benoit <b-cousson@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
13 years agousb: musb: gadget: do not poke with gadget's list_head
Felipe Balbi [Wed, 16 Feb 2011 10:40:05 +0000 (12:40 +0200)]
usb: musb: gadget: do not poke with gadget's list_head

struct usb_request's list_head is supposed to be
used only by gadget drivers, but musb is abusing
that. Give struct musb_request its own list_head
and prevent musb from poking into other driver's
business.

Signed-off-by: Felipe Balbi <balbi@ti.com>
13 years agousb: musb: gadget: beautify usb_gadget_probe_driver()/usb_gadget_unregister_driver
Felipe Balbi [Mon, 17 Jan 2011 08:34:38 +0000 (10:34 +0200)]
usb: musb: gadget: beautify usb_gadget_probe_driver()/usb_gadget_unregister_driver

Just a few cosmetic fixes to usb_gadget_probe_driver()
and usb_gadget_unregister_driver().

Decreased a few indentation levels with goto statements.

While at that, also add the missing call to musb_stop().
If we don't have OTG, there's no point of leaving
MUSB prepared for operation if a gadget driver fails
to probe. The same is valid for usb_gadget_unregister_driver(),
since we are removing the gadget driver and we don't have
OTG, we can completely unconfigure MUSB.

Signed-off-by: Felipe Balbi <balbi@ti.com>
13 years agousb: musb: do not error out if Kconfig doesn't match board mode
Felipe Balbi [Wed, 16 Feb 2011 10:27:54 +0000 (12:27 +0200)]
usb: musb: do not error out if Kconfig doesn't match board mode

During development, even though board is wired
to e.g. OTG, we might want to compile host-only
or peripheral-only configurations.

Let's allow that to happen.

Signed-off-by: Felipe Balbi <balbi@ti.com>
13 years agousb: isp1362-hcd: use bitmap_clear() and bitmap_set()
Akinobu Mita [Wed, 16 Feb 2011 14:47:51 +0000 (23:47 +0900)]
usb: isp1362-hcd: use bitmap_clear() and bitmap_set()

Use bitmap_set()/bitmap_clear() to fill/zero a region of a bitmap
instead of doing set_bit()/clear_bit() each bit.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agoUSB: make ehci msm driver use ehci_run.
Matthieu CASTET [Tue, 15 Feb 2011 17:41:54 +0000 (18:41 +0100)]
USB: make ehci msm driver use ehci_run.

Now that ehci_run don't call ehci_reset, we can use ehci_run.

Signed-off-by: Matthieu CASTET <castet.matthieu@parrot.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agoUSB: don't run ehci_reset in ehci_run for tdi device
Matthieu CASTET [Tue, 15 Feb 2011 17:40:28 +0000 (18:40 +0100)]
USB: don't run ehci_reset in ehci_run for tdi device

TDI driver does the ehci_reset in their reset callback.
Don't reset in ehci_run because configuration settings done in
platform driver will be reset.

This will allow to make msm use ehci_run.

Signed-off-by: Matthieu CASTET <castet.matthieu@parrot.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>