Ville Syrjälä [Thu, 10 Dec 2015 16:22:31 +0000 (18:22 +0200)]
drm/i915: Unbreak check_digital_port_conflicts()
Atomic changes broke check_digital_port_conflicts(). It needs to look
at the global situation instead of just trying to find a conflict
within the current atomic state.
This bug made my HSW explode spectacularly after I had split the DDI
encoders into separate DP and HDMI encoders. With the fix, things
seem much more solid.
I hope holding the connection_mutex is enough protection that we can
actually walk the connectors even if they're not part of the current
atomic state...
v2: Regenerate the patch so that it actually applies (Jani)
Cc: stable@vger.kernel.org Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Fixes: 5448a00d3f06 ("drm/i915: Don't use staged config in check_digital_port_conflicts()") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1449764551-12466-1-git-send-email-ville.syrjala@linux.intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Lukas Wunner [Sat, 19 Dec 2015 14:40:39 +0000 (15:40 +0100)]
drm/i915: Remove obsolete code from intelfb_alloc()
Clean up after 0c82312f3f15 ("drm/i915: Pin the ifbdev for the
info->system_base GGTT mmapping"):
At each of the remaining "goto out" in intelfb_alloc(), fb can only be
either an ERR_PTR or NULL, so the call to drm_framebuffer_unreference()
is now obsolete.
Ville Syrjälä [Fri, 18 Dec 2015 17:24:39 +0000 (19:24 +0200)]
drm/i915: Workaround CHV pipe C cursor fail
Turns out CHV pipe C was glued on somewhat poorly, and there's something
wrong with the cursor. If the cursor straddles the left screen edge,
and is then moved away from the edge or disabled, the pipe will often
underrun. If enough underruns are triggered quickly enough the pipe
will fall over and die (it just scans out a solid color and reports
a constant underrun). We need to turn the disp2d power well off and
on again to recover the pipe.
None of that is very nice for the user, so let's just refuse to place
the cursor in the compromised position. The ddx appears to fall back
to swcursor when the ioctl returns an error, so theoretically there's
no loss of functionality for the user (discounting swcursor bugs).
I suppose most cursors images actually have the hotspot not exactly
at 0,0 so under typical conditions the fallback will in fact kick in
as soon as the cursor touches the left edge of the screen.
Any atomic compositor should anyway be prepared to fall back to
GPU composition when things don't work out, so there should be no
problem with those.
Other things that I tried to solve this include flipping all
display related clock gating knobs I could find, increasing the
minimum gtt alignment all the way up to 512k. I also tried to see
if there are more specific screen coordinates that hit the bug, but
the findings were somewhat inconclusive. Sometimes the failures
happen almost across the whole left edge, sometimes more at the very
top and around the bottom half. I wasn't able to find any real pattern
to these variations, so it seems our only choice is to just refuse
to straddle the left screen edge at all.
Gary Wang [Tue, 15 Dec 2015 04:40:30 +0000 (12:40 +0800)]
drm/i915: Correct max delay for HDMI hotplug live status checking
The total delay of HDMI hotplug detecting with 30ms have already
been split into a resolution of 3 retries of 10ms each, for the worst
cases. But it still suffered from only waiting 10ms at most in
intel_hdmi_detect(). This patch corrects it by reading hotplug status
with 4 times at most for 30ms delay.
v2:
- straight up to loop execution for more clear in code readability
- mdelay will replace with msleep by Daniel's new patch
drm/i915: mdelay(10) considered harmful
- suggest to re-evaluate try times for being compatible to old HDMI monitor
Reviewed-by: Cooper Chiou <cooper.chiou@intel.com> Tested-by: Gary Wang <gary.c.wang@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Gavin Hindman <gavin.hindman@intel.com> Cc: Sonika Jindal <sonika.jindal@intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by: Gary Wang <gary.c.wang@intel.com>
[danvet: fixup conflict with s/mdelay/msleep/ patch.] Cc: drm-intel-fixes@lists.freedesktop.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
drm/i915: Serialise updates to GGTT with access through GGTT on Braswell
thankfully caught by the extra WARN safegaurd in 0a878716. Since we now
override the GGTT insert_pages callback when installing the aliasing
ppgtt, we assert that the callback is the original ggtt routine.
However, on Braswell we now use a different insertion routine to
serialise access through the GGTT with updating the PTE and hence the
conflict. To avoid the conflict, move the custom insertion routine for
Braswell down a level.
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Michel Thierry <michel.thierry@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1447859979-20107-1-git-send-email-chris@chris-wilson.co.uk Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: drm-intel-fixes@lists.freedesktop.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Mika Kuoppala [Wed, 16 Dec 2015 17:18:37 +0000 (19:18 +0200)]
drm/i915: Apply broader WaRsDisableCoarsePowerGating for guc also
commit 344df9809f45 ("drm/i915/skl: Disable coarse power gating up until F0")
failed to take into account that the same workaround is used in guc
when forcewake is sampled.
Wrap the condition check inside a macro and use it in both places
to fix the guc side scope.
Mika Kuoppala [Fri, 18 Dec 2015 14:14:53 +0000 (16:14 +0200)]
drm/i915/skl: Default to noncoherent access up to F0
The workarounds for disabling hdc invalidation and also forcing
context to be non coherent, are advised to be used up until rev D0.
However as it was found that rev F0, without the
WaForceEnableNonCoherent might system hang if the mesa
tried to use coherent mode.
As these two workarounds are about non coherent access, are
grouped in scope and they point the same HSD, increase the
scope of both to set default behaviour to non coherent access.
Chris Wilson [Fri, 11 Dec 2015 11:32:59 +0000 (11:32 +0000)]
drm/i915: Only spin whilst waiting on the current request
Limit busywaiting only to the request currently being processed by the
GPU. If the request is not currently being processed by the GPU, there
is a very low likelihood of it being completed within the 2 microsecond
spin timeout and so we will just be wasting CPU cycles.
v2: Check for logical inversion when rebasing - we were incorrectly
checking for this request being active, and instead busywaiting for
when the GPU was not yet processing the request of interest.
v3: Try another colour for the seqno names.
v4: Another colour for the function names.
v5: Remove the forced coherency when checking for the active request. On
reflection and plenty of recent experimentation, the issue is not a
cache coherency problem - but an irq/seqno ordering problem (timing issue).
Here, we do not need the w/a to force ordering of the read with an
interrupt.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: "Rogozhkin, Dmitry V" <dmitry.v.rogozhkin@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Eero Tamminen <eero.t.tamminen@intel.com> Cc: "Rantala, Valtteri" <valtteri.rantala@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1449833608-22125-4-git-send-email-chris@chris-wilson.co.uk
Chris Wilson [Fri, 11 Dec 2015 11:32:58 +0000 (11:32 +0000)]
drm/i915: Limit the busy wait on requests to 5us not 10ms!
When waiting for high frequency requests, the finite amount of time
required to set up the irq and wait upon it limits the response rate. By
busywaiting on the request completion for a short while we can service
the high frequency waits as quick as possible. However, if it is a slow
request, we want to sleep as quickly as possible. The tradeoff between
waiting and sleeping is roughly the time it takes to sleep on a request,
on the order of a microsecond. Based on measurements of synchronous
workloads from across big core and little atom, I have set the limit for
busywaiting as 10 microseconds. In most of the synchronous cases, we can
reduce the limit down to as little as 2 miscroseconds, but that leaves
quite a few test cases regressing by factors of 3 and more.
The code currently uses the jiffie clock, but that is far too coarse (on
the order of 10 milliseconds) and results in poor interactivity as the
CPU ends up being hogged by slow requests. To get microsecond resolution
we need to use a high resolution timer. The cheapest of which is polling
local_clock(), but that is only valid on the same CPU. If we switch CPUs
because the task was preempted, we can also use that as an indicator that
the system is too busy to waste cycles on spinning and we should sleep
instead.
__i915_spin_request was introduced in
commit 2def4ad99befa25775dd2f714fdd4d92faec6e34 [v4.2]
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Tue Apr 7 16:20:41 2015 +0100
drm/i915: Optimistically spin for the request completion
v2: Drop full u64 for unsigned long - the timer is 32bit wraparound safe,
so we can use native register sizes on smaller architectures. Mention
the approximate microseconds units for elapsed time and add some extra
comments describing the reason for busywaiting.
Chris Wilson [Fri, 11 Dec 2015 11:32:57 +0000 (11:32 +0000)]
drm/i915: Break busywaiting for requests on pending signals
The busywait in __i915_spin_request() does not respect pending signals
and so may consume the entire timeslice for the task instead of
returning to userspace to handle the signal.
In the worst case this could cause a delay in signal processing of 20ms,
which would be a noticeable jitter in cursor tracking. If a higher
resolution signal was being used, for example to provide fairness of a
server timeslices between clients, we could expect to detect some
unfairness between clients (i.e. some windows not updating as fast as
others). This issue was noticed when inspecting a report of poor
interactivity resulting from excessively high __i915_spin_request usage.
Fixes regression from
commit 2def4ad99befa25775dd2f714fdd4d92faec6e34 [v4.2]
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Tue Apr 7 16:20:41 2015 +0100
drm/i915: Optimistically spin for the request completion
v2: Try to assess the impact of the bug
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Jens Axboe <axboe@kernel.dk>
Cc; "Rogozhkin, Dmitry V" <dmitry.v.rogozhkin@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Eero Tamminen <eero.t.tamminen@intel.com> Cc: "Rantala, Valtteri" <valtteri.rantala@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1449833608-22125-2-git-send-email-chris@chris-wilson.co.uk
Imre Deak [Thu, 17 Dec 2015 17:04:33 +0000 (19:04 +0200)]
drm/i915: don't enable autosuspend on platforms without RPM support
pm_runtime_{use,dont_use}_autosuspend() controls whether the device's
sysfs power/autosuspend_delay_ms file is writeable or returns -EIO on
access to user space. Since
drm/i915: get a permanent RPM reference on platforms w/o RPM support
this sysfs file is writeable also on platforms without RPM support, but
userspace (at least IGT) depends on this file being unchangable to
determine whether the device supports runtime PM at all. So restore the
old behavior.
This gets rid of igt/pm_rpm failures on old platforms without RPM
support, where the test should be skipped.
Matt Roper [Thu, 3 Dec 2015 19:37:36 +0000 (11:37 -0800)]
drm/i915: Disable primary plane if we fail to reconstruct BIOS fb (v2)
If we fail to reconstruct the BIOS fb (e.g., because the FB is too
large), we'll be left with plane state that indicates the primary plane
is visible yet has a NULL fb. This mismatch causes problems later on
(e.g., for the watermark code). Since we've failed to reconstruct the
BIOS FB, the best solution is to just disable the primary plane and
pretend the BIOS never had it enabled.
Chris Wilson [Fri, 4 Dec 2015 16:05:26 +0000 (16:05 +0000)]
drm/i915: Pin the ifbdev for the info->system_base GGTT mmapping
A long time ago (before 3.14) we relied on a permanent pinning of the
ifbdev to lock the fb in place inside the GGTT. However, the
introduction of stealing the BIOS framebuffer and reusing its address in
the GGTT for the fbdev has muddied waters and we use an inherited fb.
However, the inherited fb is only pinned whilst it is active and we no
longer have an explicit pin for the info->system_base mmapping used by
the fbdev. The result is that after some aperture pressure the fbdev may
be evicted, but we continue to write the fbcon into the same GGTT
address - overwriting anything else that may be put into that offset.
The effect is most pronounced across suspend/resume as
intel_fbdev_set_suspend() does a full clear over the whole scanout.
v2: Only unpin the intel_fb is we allocate it. If we inherit the fb from
the BIOS, we do not own the pinned vma (except for the reference we add
in this patch for our access via info->screen_base).
v3: Finish balancing the vma pinning for the normal !preallocated case.
v4: Try to simplify the pinning even further.
v5: Leak the VMA (cleaned up by object-free) to avoid complicated error paths.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: "Goel, Akash" <akash.goel@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Lukas Wunner <lukas@wunner.de> Cc: drm-intel-fixes@lists.freedesktop.org Link: http://patchwork.freedesktop.org/patch/msgid/1449245126-26158-1-git-send-email-chris@chris-wilson.co.uk Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Fri, 20 Nov 2015 14:16:39 +0000 (14:16 +0000)]
drm/i915: Set the map-and-fenceable flag for preallocated objects
As we mark the preallocated objects as bound, we should also flag them
correctly as being map-and-fenceable (if appropriate!) so that later
users do not get confused and try and rebind the pinned vma in order to
get a map-and-fenceable binding.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: "Goel, Akash" <akash.goel@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: drm-intel-fixes@lists.freedesktop.org Link: http://patchwork.freedesktop.org/patch/msgid/1448029000-10616-1-git-send-email-chris@chris-wilson.co.uk Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Imre Deak [Tue, 15 Dec 2015 18:10:38 +0000 (20:10 +0200)]
drm/i915: check that we are in an RPM atomic section in GGTT PTE updaters
The device should be on for the whole duration of the update, so check
for this.
v2:
- use the existing dev_priv directly everywhere (Ville)
v3:
- check also that we are in an RPM atomic section (Chris)
- add the assert to i915_ggtt_insert_entries/clear_range too (Chris)
Imre Deak [Tue, 15 Dec 2015 18:10:37 +0000 (20:10 +0200)]
drm/i915: add support for checking RPM atomic sections
In some cases we want to check whether we hold an RPM wakelock reference
for the whole duration of a sequence. To achieve this add a new RPM
atomic sequence counter that we increment any time the wakelock refcount
drops to zero. Check whether the sequence number stays the same during
the atomic section and that we hold the wakelock at the beginning of the
section.
Motivated by Chris.
v2-v3:
- unchanged
v4:
- swap the order of atomic_read() and assert_rpm_wakelock_held() in
assert_rpm_atomic_begin() to avoid race
Imre Deak [Tue, 15 Dec 2015 18:10:36 +0000 (20:10 +0200)]
drm/i915: check that we hold an RPM wakelock ref before we put it
With this change we have the corresponding wake lock checks in both the
rpm get and put functions.
v2-v3:
- unchanged
v4:
- keep the corresponding check in the get helper (Chris)
v5:
- add a note to the commit message that with this change we have the
checks both in the rpm get and put functions (Joonas)
Imre Deak [Wed, 16 Dec 2015 00:52:19 +0000 (02:52 +0200)]
drm/i915: add support for checking if we hold an RPM reference
Atm, we assert that the device is not suspended until the point when the
device is truly put to a suspended state. This is fine, but we can catch
more problems if we check that RPM refcount is non-zero. After that one
drops to zero we shouldn't access the device any more, even if the actual
device suspend may be delayed. Change assert_rpm_wakelock_held()
accordingly to check for a non-zero RPM refcount in addition to the
current device-not-suspended check.
For the new asserts to work we need to annotate every place explicitly in
the code where we expect that the device is powered. The places where we
only assume this, but may not hold an RPM reference:
- driver load
We assume the device to be powered until we enable RPM. Make this
explicit by taking an RPM reference around the load function.
- system and runtime sudpend/resume handlers
These handlers are called when the RPM reference becomes 0 and know the
exact point after which the device can get powered off. Disable the
RPM-reference-held check for their duration.
- the IRQ, hangcheck and RPS work handlers
These handlers are flushed in the system/runtime suspend handler
before the device is powered off, so it's guaranteed that they won't
run while the device is powered off even though they don't hold any
RPM reference. Disable the RPM-reference-held check for their duration.
In all these cases we still check that the device is not suspended.
These explicit annotations also have the positive side effect of
documenting our assumptions better.
This caught additional WARNs from the atomic modeset path, those should
be fixed separately.
v2:
- remove the redundant HAS_RUNTIME_PM check (moved to patch 1) (Ville)
v3:
- use a new dedicated RPM wakelock refcount to also catch cases where
our own RPM get/put functions were not called (Chris)
- assert also that the new RPM wakelock refcount is 0 in the RPM
suspend handler (Chris)
- change the assert error message to be more meaningful (Chris)
- prevent false assert errors and check that the RPM wakelock is 0 in
the RPM resume handler too
- prevent false assert errors in the hangcheck work too
- add a device not suspended assert check to the hangcheck work
v4:
- rename disable/enable_rpm_asserts to disable/enable_rpm_wakeref_asserts
and wakelock_count to wakeref_count
- disable the wakeref asserts in the IRQ handlers and RPS work too
- update/clarify commit message
v5:
- mark places we plan to change to use proper RPM refcounting with
separate DISABLE/ENABLE_RPM_WAKEREF_ASSERTS aliases (Chris)
Imre Deak [Tue, 15 Dec 2015 18:10:33 +0000 (20:10 +0200)]
drm/i915: add assert_rpm_wakelock_held helper
As a preparation for follow-up patches add a new helper that checks
whether we hold an RPM reference, since this is what we want most of
the cases. Atm this helper will only check for the HW suspended state, a
follow-up patch will do the actual change to check the refcount instead.
One exception is the forcewake release timer function, where it's
guaranteed that the HW is on even though the RPM refcount drops to zero.
This guarantee is provided by flushing the timer in the runtime suspend
handler. So leave the assert_device_not_suspended check in place there.
Also rename assert_device_suspended for consistency and export these
helpers as a preparation for the follow-up patches.
No functional change.
v3:
- change the assert warning message to be more meaningful (Chris)
Imre Deak [Thu, 17 Dec 2015 11:48:51 +0000 (13:48 +0200)]
drm/i915: remove HAS_RUNTIME_PM check from RPM get/put/assert helpers
We don't really need to check this flag in the get/put/assert helpers,
as on platforms without RPM support we won't ever enable RPM. That means
pm.suspend will be always false and the assert will be always true.
Do this to simplify the code and to let us extend the RPM asserts to all
platforms for a better coverage.
Motivated by Ville.
v2-v3:
- unchanged
v4:
- remove the HAS_RUNTIME_PM check from intel_runtime_pm_enable() too
made possible by the previous two patches
v5:
- rebased on the previous new patch in the series that keeps
HAS_RUNTIME_PM() in intel_runtime_pm_enable() with a permanent
reference taken there
Imre Deak [Thu, 17 Dec 2015 11:44:56 +0000 (13:44 +0200)]
drm/i915: get a permanent RPM reference on platforms w/o RPM support
Currently we disable RPM functionality on platforms that doesn't support
this by not putting/getting the RPM reference we receive from the RPM
core during driver loading/unloading respectively. This is somewhat
obscure, so make it more explicit by keeping a reference dedicated for
this particular purpose whenever the driver is loaded. This makes it
possible to remove the HAS_RUNTIME_PM() special casing from every other
places in the next patch.
v2:
- fix intel_runtime_pm_get vs. intel_runtime_pm_put in
intel_power_domains_fini()
v3:
- take only a low level RPM reference so the ref tracking asserts
continue to work (Ville)
- update the commit message
- move the patch earlier for bisectability
Imre Deak [Tue, 15 Dec 2015 18:10:31 +0000 (20:10 +0200)]
drm/i915: refactor RPM disabling due to RC6 being disabled
We can make the RPM dependency on RC6 explcit in the code by taking an
actual RPM reference, instead of avoiding to drop the initial one. This
will also enable us to remove the HAS_RUNTIME_PM special casing from
more places in the next patch.
Jani Nikula [Tue, 15 Dec 2015 11:18:00 +0000 (13:18 +0200)]
drm/i915/opregion: handle VBT sizes bigger than 6 KB
The RVDA and RVDS (raw VBT data address and size) fields of the ASLE
mailbox may specify an alternate location for VBT instead of mailbox #4.
Use the alternate location if available and valid, falling back to
mailbox #4 otherwise.
Ville Syrjälä [Wed, 16 Dec 2015 16:10:00 +0000 (18:10 +0200)]
drm/i915: Fix AVI/HDMI/SPD infoframes on HSW+
I broke AVI/HDMI/SPD infoframes on HSW+ with the register type
safety changes. We were supposed to check that the infoframe data
register is valid before writing the infoframe data, but the check
ended up inverted, and so in practice we never wrote or enabled
these infoframes.
We were still sending out the GCP infoframe when the sink was
deep-color capable. That and the fact that we use a single
bool to track our infoframe state meant that the state checker
only caught this when a HDMI sink that doesn't do deep-color was
used.
We really need to fix our infoframe state checking to be much
more anal. But in the meantime let's just fix the regression.
In fact let's just throw out the register validity check and
convert some of the "unknown info frame type" debug messages
into MISSING_CASE(). So far we support the same set of infoframe
types on all platforms, so the silent debug messages make no
sense.
Jani Nikula [Wed, 16 Dec 2015 13:04:19 +0000 (15:04 +0200)]
drm/i915/bios: fix format string of the VBT signature logging
Specify the maximum number of letters to print from the potentially
unterminated buffer, not the minimum. While at it, use sizeof instead of
a magic number.
Jani Nikula [Tue, 15 Dec 2015 11:14:52 +0000 (13:14 +0200)]
drm/i915/bios: move debug logging about VBT source to intel_parse_bios()
The decision about which source will be used for VBT is done in
intel_parse_bios(), not in the VBT validation function. Make the VBT
validation function strictly about validation, and move the debug
logging to where it logically belongs.
Also split the logging about where the valid VBT was found and what the
signature is. This will make even more sense in the future when the
validation for ACPI OpRegion based VBT takes place at OpRegion setup
time.
v2: Split logging about VBT signature and BDB version.
Jani Nikula [Mon, 14 Dec 2015 10:50:46 +0000 (12:50 +0200)]
drm/i915: move "no VBT in opregion" quirk to intel_opregion_setup()
Check the quirk in intel_opregion_setup(), and don't initialize
opregion->vbt at all if the quirk says it's not present, hiding the
quirk from the rest of the driver.
Deepak M [Mon, 14 Dec 2015 10:50:45 +0000 (12:50 +0200)]
drm/i915: Add Intel opregion mailbox 5 structure
Mailbox 5 is BIOS to Driver Notification mailbox is intended
to support BIOS to Driver event notification or data storage
for BIOS to Driver data synchronization purpose. Mailbox 5 is
the extension of mailbox 3.
v4 by Jani:
- don't add asle_ext to dev_priv as it's unused
- use u8 for bddc and rsvd fields in asle ext struct
- add BUILD_BUG_ON the asle ext struct size
- debug logging for asle ext present
Ville Syrjälä [Mon, 14 Dec 2015 11:16:48 +0000 (13:16 +0200)]
drm/i915: Drop the broken cursor base==0 special casing
The cursor code tries to treat base==0 to mean disabled. That fails
when the cursor bo gets bound at ggtt offset 0, and the user is left
looking at an invisible cursor.
We lose the disabled->disabled optimization, but that seems like
something better handled at a slightly higher level.
Ville Syrjälä [Mon, 14 Dec 2015 15:35:02 +0000 (17:35 +0200)]
drm/i915: Kill intel_crtc->cursor_bo
The vma may have been rebound between the last time the cursor was
enabled and now, so skipping the cursor gtt offset deduction is not
safe unless we would also reset cursor_bo to NULL when disabling the
cursor. Just thow cursor_bo to the bin instead since it's lost all
other uses thanks to universal plane support.
Chris pointed out that cursor updates are currently too slow
via universal planes that micro optimizations like these wouldn't
even help.
v2: Add a note about futility of micro optimizations (Chris)
Cc: drm-intel-fixes@lists.freedesktop.org
References: http://lists.freedesktop.org/archives/intel-gfx/2015-December/082976.html Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Takashi Iwai <tiwai@suse.de> Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1450107302-17171-1-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Rodrigo Vivi [Sat, 12 Dec 2015 00:31:31 +0000 (16:31 -0800)]
drm/i915: PSR also doesn't have link_entry_time on SKL.
This bit is also reserved on Skylake. Actually the only
platform that supports this is Haswell, so let's fix
this logic and apply this link entry time only for the
platform that supports it, i.e. Haswell.
This also changes the style to let more clear platform
differences outside the reg write. We would probably catch
this case sooner if separated, or not...
Daniel Vetter [Fri, 11 Dec 2015 18:28:27 +0000 (19:28 +0100)]
Merge tag 'drm-i915-get-eld' of tiwai/sound into drm-intel-next-queued
Add get_eld audio component for i915/HD-audio
Currently, the HDMI/DP audio status and ELD are notified and obtained
via the hardware-level communication over HD-audio unsolicited event
and verbs although the graphics driver holds the exactly same
information. As we already have a notification via audio component,
this is another step forward; namely, the audio driver may fetch
directly the audio status and ELD via the new component op.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Dave Gordon [Thu, 10 Dec 2015 18:51:24 +0000 (18:51 +0000)]
drm/i915: mark a newly-created GEM object dirty when filled with data
When creating a new (pageable) GEM object and filling it with data, we
must mark it as 'dirty', i.e. backing store is out-of-date w.r.t. the
newly-written content. This ensures that if the object is evicted under
memory pressure, its pages in the pagecache will be written to backing
store rather than discarded.
Dave Gordon [Thu, 10 Dec 2015 18:51:23 +0000 (18:51 +0000)]
drm/i915: mark GEM object pages dirty when mapped & written by the CPU
In various places, a single page of a (regular) GEM object is mapped into
CPU address space and updated. In each such case, either the page or the
the object should be marked dirty, to ensure that the modifications are
not discarded if the object is evicted under memory pressure.
The typical sequence is:
va = kmap_atomic(i915_gem_object_get_page(obj, pageno));
*(va+offset) = ...
kunmap_atomic(va);
Here we introduce i915_gem_object_get_dirty_page(), which performs the
same operation as i915_gem_object_get_page() but with the side-effect
of marking the returned page dirty in the pagecache. This will ensure
that if the object is subsequently evicted (due to memory pressure),
the changes are written to backing store rather than discarded.
Note that it works only for regular (shmfs-backed) GEM objects, but (at
least for now) those are the only ones that are updated in this way --
the objects in question are contexts and batchbuffers, which are always
shmfs-backed.
Separate patches deal with the cases where whole objects are (or may
be) dirtied.
v3: Mark two more pages dirty in the page-boundary-crossing
cases of the execbuffer relocation code [Chris Wilson]
Tomas Elf [Fri, 23 Oct 2015 17:02:37 +0000 (18:02 +0100)]
drm/i915: Update to post-reset execlist queue clean-up
When clearing an execlist queue, instead of traversing it and unreferencing all
requests while holding the spinlock (which might lead to thread sleeping with
IRQs are turned off - bad news!), just move all requests to the retire request
list while holding spinlock and then drop spinlock and invoke the execlists
request retirement path, which already deals with the intricacies of
purging/dereferencing execlist queue requests.
This patch assumes v2 of the above patch is part of the baseline, reverts v2
and adds changes on top to turn it into v3.
Signed-off-by: Tomas Elf <tomas.elf@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1445619757-19822-1-git-send-email-tomas.elf@intel.com Reviewed-by: Thomas Daniel <thomas.daniel@intel.com> Reviewed-by: Dave Gordon <dave.gordon@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Deepak M [Wed, 9 Dec 2015 14:44:04 +0000 (20:14 +0530)]
drm/i915: dual link pipe selection for bxt
Pipe is assigned based on the port, but it should be
based on current crtc. Correcting the same in this patch.
v2: Use macro BXT_PIPE_SELECT(pipe) (Daniel)
Signed-off-by: Deepak M <m.deepak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Rodrigo Vivi [Thu, 10 Dec 2015 19:12:27 +0000 (11:12 -0800)]
drm/i915: Fix random aux transactions failures.
Mainly aux communications on sink_crc
were failing a lot randomly on recent platforms.
The first solution was to try to use intel_dp_dpcd_read_wake, but then
it was suggested to move retries to drm level.
Since drm level was already taking care of retries and didn't want
to through random retries on that level the second solution was to
put the retries at aux_transfer layer what was nacked.
So I realized we had so many retries in different places and
started to organize that a bit. During this organization I noticed
that we weren't handing at all the case were the message size was
zeroed. And this was exactly the case that was affecting sink_crc.
Also we weren't respect BSPec who says this size message = 0 or > 20
are forbidden.
It is a fact that we still have no clue why we are getting this
forbidden value there. But anyway we need to handle that for now
so we return -EBUSY and drm level takes care of the retries that
are already in place.
v2: Print debug messsage when this case is reached as suggested
by Jani.
v3: This patch is crucial to make PSR test cases reliably working
on SKL. So split this patch from the aux re-org series and add
a FIXME as a promisse to continue that effort besides reminding
to remove the sleep when that is merged.
v4: Use a bigger usleep range so kernel doesn't need to be interrupted
on a exact time, as suggested by Paulo.
But anyway we should discuss the better time
ranges on the EBUSY handle re-org at drm level since this one here
is temporary.
v5: s/1000,1500/1000, 1500/ (by Paulo).
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Tested-by: Daniel Stone <daniels@collabora.com> # SKL Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1449774747-2772-1-git-send-email-rodrigo.vivi@intel.com
Dave Gordon [Tue, 8 Dec 2015 15:02:36 +0000 (15:02 +0000)]
drm/i915: intel_ring_initialized() must be simple and inline
Based on Chris Wilson's patch from 6 months ago, rebased and adapted.
The current implementation of intel_ring_initialized() is too heavyweight;
it's a non-inlined function that chases several levels of pointers. This
wouldn't matter too much if it were rarely called, but it's used inside
the iterator test of for_each_ring() and is therefore called quite
frequently. So let's make it simple and inline ...
The idea here is to use ring->dev as an indicator showing which engines
have been initialised and are therefore to be included in iterations that
use for_each_ring(). This allows us to avoid multiple memory references
and a (non-inlined) function call on each iteration of each such loop.
Takashi Iwai [Mon, 30 Nov 2015 17:19:39 +0000 (18:19 +0100)]
drm/i915: Add reverse mapping between port and intel_encoder
This patch adds a reverse mapping from a digital port number to
intel_encoder object containing the corresponding intel_digital_port.
It simplifies the query of the encoder a lot.
Note that, even if it's a valid digital port, the dig_port_map[] might
point still to NULL -- usually it implies a DP MST port. Due to this
fact, the NULL check in each place has no WARN_ON() and just skips the
port. Once when the situation changes in future, we might introduce
WARN_ON() for a more strict check.
Takashi Iwai [Thu, 12 Nov 2015 14:23:41 +0000 (15:23 +0100)]
drm/i915: Add get_eld audio component
Implement a new i915_audio_component_ops, get_eld(). It's called by
the audio driver to fetch the current audio status and ELD of the
given HDMI/DP port. It returns the size of expected ELD bytes if it's
valid, zero if no valid ELD is found, or a negative error code. The
current state of audio on/off is stored in the given pointer, too.
Note that the returned size isn't limited to the given max bytes. If
the size is greater than the max bytes, it means that only a part of
ELD has been copied back.
For achieving this implementation, a new field audio_connector is
added to struct intel_digital_port. It points to the connector
assigned to the given digital port. It's set/reset at each audio
enable/disable call in intel_audio.c, and protected with av_mutex.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Takashi Iwai <tiwai@suse.de>
drm/i915: Do a better job at disabling primary plane in the noatomic case.
When disable_noatomic is called plane_mask is not correct yet, and
plane_state->visible = true is left as true after disabling the primary
plane.
Other planes are already disabled as part of crtc sanitization, only the
primary is left active. But the plane_mask is not updated here. It gets
updated during fb takeover in modeset_gem_init, or set to the new value
on resume.
This means that to disable the primary plane 1 << drm_plane_index(primary)
needs to be used.
Afterwards because the crtc is no longer active it's forbidden to keep
plane_state->visible set, or a WARN_ON in
intel_plane_atomic_calc_changes triggers. There are other code points
that rely on accurate plane_state->visible too, so make sure the bool is
cleared.
The other planes are already disabled in intel_sanitize_crtc, so they
don't have to be handled here.
Cc: stable@vger.kernel.org #v4.3, v4.2?
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92655 Tested-by: Tomas Mezzadra <tmezzadra@gmail.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/5652DB88.9070208@linux.intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Wayne Boyer [Tue, 8 Dec 2015 17:38:52 +0000 (09:38 -0800)]
drm/i915: Only set gem object L3 cache level for IVB devices
Do some further clean up based on the initial review of
drm/i915: Separate cherryview from valleyview.
In this case, in i915_gem_alloc_context_obj() only call
i915_gem_object_set_cache_level() for Ivy Bridge devices
since later platforms don't have L3 control bits in the PTE.
v2: Expand comment to mention snooping requirement. (Ville, Imre)
Wayne Boyer [Wed, 9 Dec 2015 20:29:35 +0000 (12:29 -0800)]
drm/i915: Separate cherryview from valleyview
The cherryview device shares many characteristics with the valleyview
device. When support was added to the driver for cherryview, the
corresponding device info structure included .is_valleyview = 1.
This is not correct and leads to some confusion.
This patch changes .is_valleyview to .is_cherryview in the cherryview
device info structure and simplifies the IS_CHERRYVIEW macro.
Then where appropriate, instances of IS_VALLEYVIEW are replaced with
IS_VALLEYVIEW || IS_CHERRYVIEW or equivalent.
v2: Use IS_VALLEYVIEW || IS_CHERRYVIEW instead of defining a new macro.
Also add followup patches to fix issues discovered during the first
review. (Ville)
v3: Fix some style issues and one gen check. Remove CRT related changes
as CRT is not supported on CHV. (Imre, Ville)
v4: Make a few more optimizations. (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Wayne Boyer <wayne.boyer@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1449692975-14803-1-git-send-email-wayne.boyer@intel.com Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com>
Joonas Lahtinen [Wed, 9 Dec 2015 13:56:13 +0000 (15:56 +0200)]
drm/i915: Cancel hangcheck before GPU is suspended
In order to avoid accessing GPU registers while GPU is suspended cancel
the hangcheck work before calling intel_suspend_complete which actually
puts the GPU to suspend. Otherwise hangcheck might do MMIO reads to a
suspended GPU.
Placement before intel_guc_suspend is imitated from i915_drm_suspend
which cancels the work at i915_gem_suspend, to keep the functions
similar.
On VLV systems, namely BYT, this was causing an error during runtime
suspend cycle:
[drm:vlv_check_no_gt_access [i915]] *ERROR* GT register access while GT waking disabled
Dave Gordon [Tue, 8 Dec 2015 13:30:51 +0000 (13:30 +0000)]
drm/i915: eliminate 'temp' in gen8_for_each_{pdd, pdpe, pml4e} macros
All of these iterator macros require a 'temp' argument, used merely to
hold internal partial results. We can instead declare the temporary
variable inside the macro, so the caller need not provide it.
Some of the old code contained nested iterators that actually reused the
same 'temp' variable for both inner and outer instances. It's quite
surprising that this didn't introduce bugs! But it does show that the
value of 'temp' isn't required to persist during the iterated body.
Chris Wilson [Tue, 8 Dec 2015 11:55:07 +0000 (11:55 +0000)]
drm/i915: Add soft-pinning API for execbuffer
Userspace can pass in an offset that it presumes the object is located
at. The kernel will then do its utmost to fit the object into that
location. The assumption is that userspace is handling its own object
locations (for example along with full-ppgtt) and that the kernel will
rarely have to make space for the user's requests.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
v2: Fixed incorrect eviction found by Michal Winiarski - fix suggested by Chris
Wilson. Fixed incorrect error paths causing crash found by Michal Winiarski.
(Not published externally)
v3: Rebased because of trivial conflict in object_bind_to_vm. Fixed eviction
to allow eviction of soft-pinned objects when another soft-pinned object used
by a subsequent execbuffer overlaps reported by Michal Winiarski.
(Not published externally)
v4: Moved soft-pinned objects to the front of ordered_vmas so that they are
pinned first after an address conflict happens to avoid repeated conflicts in
rare cases (Suggested by Chris Wilson). Expanded comment on
drm_i915_gem_exec_object2.offset to cover this new API.
v5: Added I915_PARAM_HAS_EXEC_SOFTPIN parameter for detecting this capability
(Kristian). Added check for multiple pinnings on eviction (Akash). Made sure
buffers are not considered misplaced without the user specifying
EXEC_OBJECT_SUPPORTS_48B_ADDRESS. User must assume responsibility for any
addressing workarounds. Updated object2.offset field comment again to clarify
NO_RELOC case (Chris). checkpatch cleanup.
v6: Trivial rebase on latest drm-intel-nightly
v7: Catch attempts to pin above the max virtual address size and return
EINVAL (Tvrtko). Decouple EXEC_OBJECT_SUPPORTS_48B_ADDRESS and
EXEC_OBJECT_PINNED flags, user must pass both flags in any attempt to pin
something at an offset above 4GB (Chris, Daniel Vetter).
Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Akash Goel <akash.goel@intel.com> Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Cc: Michal Winiarski <michal.winiarski@intel.com> Cc: Zou Nanhai <nanhai.zou@intel.com> Cc: Kristian Høgsberg <hoegsberg@gmail.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Michel Thierry <michel.thierry@intel.com> Acked-by: PDT Signed-off-by: Thomas Daniel <thomas.daniel@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1449575707-20933-1-git-send-email-thomas.daniel@intel.com
Rodrigo Vivi [Wed, 9 Dec 2015 00:58:38 +0000 (16:58 -0800)]
drm/i915/kbl: drm/i915: Avoid GuC loading for now on Kabylake.
GuC has no version for KBL published yet and it is not recommended
to load the Skylake one, so let's avoid loading this for now while
we don't have the proper GuC firmware for Kabylake.
Imre Deak [Thu, 4 Dec 2014 16:39:35 +0000 (18:39 +0200)]
drm/i915: vlv: clamp minimum RPS frequency to what Punit allows
As described in the code comment, I couldn't set the minimum RPS
frequency on my BYT-M B0 to the minimum allowed as reported by Punit.
Fix this by clamping the minimum value to the first one that was
accepted on my machine.
Atm this issue doesn't cause any test failures, since in igt/pm_rps we
only check the cached version of the current frequency which is the same
what has been set. In the future we'll add checks for the actual
frequency too, and for that to pass this fix is necessary.
Ville Syrjälä [Fri, 4 Dec 2015 20:22:50 +0000 (22:22 +0200)]
drm/i915: Leave FDI running after failed link training on LPT-H
Currently we disable some parts of FDI setup after a failed link
training. But despite that we continue with the modeset as if everything
is fine. This results in tons of noise from the state checker, and
it means we're not following the proper modeset sequence for the rest of
crtc enabling, nor for crtc disabling.
Ideally we should abort the modeset and follow the proper disable
sequence to shut off everything we enabled so far, but that would
require a big rework of the modeset code. So instead just leave FDI
up and running in its untrained state, and log an error. This is
what we do on older platforms too.
Ville Syrjälä [Fri, 4 Dec 2015 20:22:14 +0000 (22:22 +0200)]
drm/i915: Disable LPT-H VGA dotclock during crtc disable
Currently we leave the LPT-H VGA dotclock running after turning
the pipe/fdi/port/etc. Properly disable the VGA dotclock as
specified in the modeset sequence.
Ville Syrjälä [Tue, 8 Dec 2015 14:05:48 +0000 (16:05 +0200)]
drm/i915: Disable FDI after the CRT port on LPT-H
Bspec modeset sequence tells us to disable the PCH transcoder and
FDI after the CRT port on LPT-H, so let's do that. And the CRT port
should be disabled after the pipe, as we do on other PCH platforms
too since
commit 1ea56e269e13 ("drm/i915: Disable CRT port after pipe on PCH platforms")
commit 00490c22b1b5 ("drm/i915: Consider SPLL as another shared pll, v2.")
moved the SPLL disable from the .post_disable() hook to some upper
level code, so we can just move the CRT port disabling into the
.post_disable() hook. If we still had the non-shared SPLL, it would have
needed to be moved into the .post_pll_disable() hook.
v2: Actually move the CRT port disable to the .post_disable() hook,
and amend the commit message with more details (Paulo)
v3: Fix typos in commit message (Paulo)
Ville Syrjälä [Fri, 4 Dec 2015 20:19:39 +0000 (22:19 +0200)]
drm/i915: Disable CLKOUT_DP bending on LPT/WPT as needed
When we want to use SPLL for FDI we want SSC, which means we have to
disable clock bending for the PCH SSC reference (bend and spread are
mutually exclusive). So let's turn off bending when we want spread.
In case the BIOS enabled clock bending for some reason we'll just turn
it off and enable the spread mode instead.
Not sure what happens if the BIOS is actually using the bend source for
HDMI at this time, but I suppose it should be no worse than what already
happens when we simply turn on the spread.
We don't currently use the bend source for anything, and only use the
PCH SSC reference for the SPLL to drive FDI (always with spread).
v2: Fix the %5 vs %10 fumble for SSCDITHPHASE (Paulo)
Add 'WARN_ON(steps % 5 != 0)' sanity check (Paulo)
Fix typos in commit message (Paulo)
Mika Kuoppala [Mon, 7 Dec 2015 16:29:44 +0000 (18:29 +0200)]
drm/i915/skl: Disable coarse power gating up until F0
There is conflicting info between E0 and F0 steppings
for this workarounds. Trust more authoritative source and
be conservative and extend also for F0.
This prevents numerous (>50) gpu hangs with SKL GT4e
during piglit run.
Rodrigo Vivi [Mon, 7 Dec 2015 22:45:20 +0000 (14:45 -0800)]
drm/i915: Fix idle_frames counter.
'commit 97173eaf5 ("drm/i915: PSR: Increase idle_frames")' was a mistake.
The special case it tried to cover was already being covered by
the DP_PSR_NO_TRAIN_ON_EXIT. So this ended up duplicated.
So, instead of reverting that let's take this opportunity and unify
the idle_frame definition in a single place so we standardize the access
and avoid room for that same mistake again.
Few changes with this patch:
1. Instead of just respecting the VBT we set a
global minumum with max(). So we are sure that we will avoid corner cases
in case VBT is doing something we don't understand.
2. Instead of minimum 5 we use 6. When introducing the idle_frames += 4 case
we considered that minimum was 2. All because the off-by-one issue.
drm/i915/skl: Update watermarks before the crtc is disabled.
On skylake some of the registers are only writable when the correct
power wells are enabled. Because of this watermarks have to be updated
before the crtc turns off, or you get unclaimed register read and write
warnings.
This patch needs to be modified slightly to apply to -fixes.
drm/i915: Calculate watermark related members in the crtc_state, v4.
This removes pre/post_wm_update from intel_crtc->atomic, and
creates atomic state for it in intel_crtc.
Changes since v1:
- Rebase on top of wm changes.
Changes since v2:
- Split disable_cxsr into a separate patch.
Changes since v3:
- Move some of the changes to intel_wm_need_update.
Dave Airlie [Mon, 7 Dec 2015 08:17:09 +0000 (18:17 +1000)]
Merge tag 'topic/drm-misc-2015-12-04' of git://anongit.freedesktop.org/drm-intel into drm-next
New -misc pull. Big thing is Thierry's atomic helpers for system suspend
resume, which I'd like to use in i915 too. Hence the pull.
* tag 'topic/drm-misc-2015-12-04' of git://anongit.freedesktop.org/drm-intel:
drm: keep connector status change logging human readable
drm/atomic-helper: Reject attempts at re-stealing encoders
drm/atomic-helper: Implement subsystem-level suspend/resume
drm: Implement drm_modeset_lock_all_ctx()
drm/gma500: Add driver private mutex for the fault handler
drm/gma500: Drop dev->struct_mutex from mmap offset function
drm/gma500: Drop dev->struct_mutex from fbdev init/teardown code
drm/gma500: Drop dev->struct_mutex from modeset code
drm/gma500: Use correct unref in the gem bo create function
drm/edid: Make the detailed timing CEA/HDMI mode fixup accept up to 5kHz clock difference
drm/atomic_helper: Add drm_atomic_helper_disable_planes_on_crtc()
drm: Serialise multiple event readers
drm: Drop dev->event_lock spinlock around faulting copy_to_user()
James Simmons [Fri, 4 Dec 2015 23:23:08 +0000 (18:23 -0500)]
staging/lustre: remove IOC_LIBCFS_PING_TEST ioctl
The ioctl IOC_LIBCFS_PING_TEST has not been used in ages. The recent
nidstring changes which moved all the nidstring operations from libcfs
to the LNet layer but this ioctl code was still using an nidstring
operation that was causing a circular dependency loop between libcfs and
LNet.
Linus Torvalds [Sun, 6 Dec 2015 21:51:49 +0000 (13:51 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs fixes from Al Viro:
"A couple of fixes (-stable fodder) + dead code removal after the
overlayfs fix.
I agree that it's better to separate from the fix part to make
backporting easier, but IMO it's not worth delaying said dead code
removal until the next window"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
Don't reset ->total_link_count on nested calls of vfs_path_lookup()
ovl: get rid of the dead code left from broken (and disabled) optimizations
ovl: fix permission checking for setattr
Al Viro [Sun, 6 Dec 2015 17:33:02 +0000 (12:33 -0500)]
Don't reset ->total_link_count on nested calls of vfs_path_lookup()
we already zero it on outermost set_nameidata(), so initialization in
path_init() is pointless and wrong. The same DoS exists on pre-4.2
kernels, but there a slightly different fix will be needed.
Cc: stable@vger.kernel.org # v4.2 Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
projects / linux-beck.git / log