Masanari Iida [Thu, 26 Jan 2012 15:32:19 +0000 (00:32 +0900)]
aic7xxx: Fix typo in aic7xxx
Correct spelling "staus" to "status" in aic79xx_core.c and
Correct spelling "staus" to "status" in aic7xxx_core.c and
Correct spelling "supportd" to "supported" in aic79xx_core.c
Jesper Juhl [Fri, 3 Feb 2012 22:14:19 +0000 (23:14 +0100)]
gma500, lvds: Fix use after free and mem leak in psb_intel_lvds_init()
In psb_intel_lvds_init(), if we fail to allocate memory for
'psb_intel_connector' we free the memory we previously allocated for
'psb_intel_encoder', but we then proceed to use that free'd pointer
when we do 'psb_intel_encoder->dev_priv = lvds_priv;'.
We may also leak the memory we allocated for 'psb_intel_encoder' if we
'goto failed_connector;' and the variable goes out of scope.
While I was there anyway, I also removed the pointless 'if
(psb_intel_connector)' before freeing it at the 'failed_connector:'
label - kfree() deals gracefully with NULL pointers, so it is not
needed.
i386 and sparc64 have the identical code to update the cmos clock. Move it
into kernel/time/ntp.c as there are other architectures coming along with the
same requirements.
Signed-off-by: Michael Witten <mfwitten@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Jesper Juhl [Sun, 15 Jan 2012 20:26:46 +0000 (21:26 +0100)]
ab5500-core.c: Don't needlessly include linux/version.h
As 'make versioncheck' so nicely points out, there's no need for
drivers/mfd/ab5500-core.c to #include the linux/version.h header.
This patch removes the pointless include.
Linus Torvalds [Fri, 3 Feb 2012 20:41:31 +0000 (12:41 -0800)]
Merge tag 'kmemleak-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux
Trivial kmemleak bug-fixes:
- Early logging doesn't stop when kmemleak is off by default.
- Zero-size scanning areas should be ignored (currently it prints a
warning).
* tag 'kmemleak-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux:
kmemleak: Disable early logging when kmemleak is off by default
kmemleak: Only scan non-zero-size areas
Linus Torvalds [Fri, 3 Feb 2012 18:06:15 +0000 (10:06 -0800)]
Merge tag 'sound-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
sound fixes for 3.3-rc3
Most of commits are either regression fixes for varioud HD-audio
codecs or small ASoC fixes. Also a trivial build fix is included.
* tag 'sound-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - Disable dynamic-power control for VIA as default
ALSA: hda - Allow analog low-current mode when dynamic power-control is on
ALSA: hda - Fix the logic to detect VIA analog low-current mode
ALSA: hda - Check power-state before changing in patch_via.c
ALSA: HDA: Fix duplicated output to more than one codec
ALSA: hda - Fix calling cs_automic twice for Cirrus codecs.
ALSA: HDA: Remove quirk for Toshiba Qosmio G50
ALSA: HDA: Fix jack creation for codecs with front and rear Line In
ALSA: hda - Apply 0x0f-VREF fix to all ASUS laptops with ALC861/660
ASoC: neo1973_wm8753: remove references to the neo1973-gta01 machine
ALSA: Add #ifdef CONFIG_PCI guard for snd_pci_quirk_* functions
ASoC: wm_hubs: fix wrong bits for LINEOUT2 N/P mixer
ALSA: HDA: Remove quirk for Asus N53Jq
ASoC: wm_hubs: Enable line out VMID buffer for single ended line outputs
ASoC: wm5100: Mark register cache as dirty when regulators are disabled
ASoC: wm8962: Mark register cache as dirty when regulators are disabled
ASoC: wm8996: Mark register cache as dirty when regulators are disabled
ASoC: wm5100: Fix microphone configuration
ASoC: wm5100: Make sure we switch to button reporting mode
Linus Torvalds [Thu, 2 Feb 2012 23:47:33 +0000 (15:47 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
rbd: fix safety of rbd_put_client()
rbd: fix a memory leak in rbd_get_client()
ceph: create a new session lock to avoid lock inversion
ceph: fix length validation in parse_reply_info()
ceph: initialize client debugfs outside of monc->mutex
ceph: change "ceph.layout" xattr to be "ceph.file.layout"
Alex Elder [Sun, 29 Jan 2012 19:57:43 +0000 (13:57 -0600)]
rbd: fix safety of rbd_put_client()
The rbd_client structure uses a kref to arrange for cleaning up and
freeing an instance when its last reference is dropped. The cleanup
routine is rbd_client_release(), and one of the things it does is
delete the rbd_client from rbd_client_list. It acquires node_lock
to do so, but the way it is done is still not safe.
The problem is that when attempting to reuse an existing rbd_client,
the structure found might already be in the process of getting
destroyed and cleaned up.
Here's the scenario, with "CLIENT" representing an existing
rbd_client that's involved in the race:
Thread on CPU A | Thread on CPU B
--------------- | ---------------
rbd_put_client(CLIENT) | rbd_get_client()
kref_put() | (acquires node_lock)
kref->refcount becomes 0 | __rbd_client_find() returns CLIENT
calls rbd_client_release() | kref_get(&CLIENT->kref);
| (releases node_lock)
(acquires node_lock) |
deletes CLIENT from list | ...and starts using CLIENT...
(releases node_lock) |
and frees CLIENT | <-- but CLIENT gets freed here
Fix this by having rbd_put_client() acquire node_lock. The result
could still be improved, but at least it avoids this problem.
Signed-off-by: Alex Elder <elder@dreamhost.com> Signed-off-by: Sage Weil <sage@newdream.net>
This has been updated since I last sent it as the creation of the new
mm_access() function did almost exactly the same thing as parts of the
previous version of this patch did.
In order to use mm_access() even when /proc isn't enabled, we move it to
kernel/fork.c where other related process mm access functions already
are.
Signed-off-by: Chris Yeoh <yeohc@au1.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alex Elder [Fri, 13 Jan 2012 01:48:10 +0000 (17:48 -0800)]
ceph: create a new session lock to avoid lock inversion
Lockdep was reporting a possible circular lock dependency in
dentry_lease_is_valid(). That function needs to sample the
session's s_cap_gen and and s_cap_ttl fields coherently, but needs
to do so while holding a dentry lock. The s_cap_lock field was
being used to protect the two fields, but that can't be taken while
holding a lock on a dentry within the session.
In most cases, the s_cap_gen and s_cap_ttl fields only get operated
on separately. But in three cases they need to be updated together.
Implement a new lock to protect the spots updating both fields
atomically is required.
Signed-off-by: Alex Elder <elder@dreamhost.com> Reviewed-by: Sage Weil <sage@newdream.net>
Xi Wang [Sun, 15 Jan 2012 03:20:59 +0000 (22:20 -0500)]
ceph: fix length validation in parse_reply_info()
"len" is read from network and thus needs validation. Otherwise, given
a bogus "len" value, p+len could be an out-of-bounds pointer, which is
used in further parsing.
Signed-off-by: Xi Wang <xi.wang@gmail.com> Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Sat, 14 Jan 2012 06:22:03 +0000 (22:22 -0800)]
ceph: initialize client debugfs outside of monc->mutex
Initializing debufs under monc->mutex introduces a lock dependency for
sb->s_type->i_mutex_key, which (combined with several other dependencies)
leads to an annoying lockdep warning. There's no particular reason to do
the debugfs setup under this lock, so move it out.
It used to be the case that our first monmap could come from the OSD; that
is no longer the case with recent servers, so we will reliably set up the
client entry during the initial authentication.
We don't have to worry about racing with debugfs teardown by
ceph_debugfs_client_cleanup() because ceph_destroy_client() calls
ceph_msgr_flush() first, which will wait for the message dispatch work
to complete (and the debugfs init to complete).
Fixes: #1940 Signed-off-by: Sage Weil <sage@newdream.net>
Alex Elder [Thu, 12 Jan 2012 01:41:01 +0000 (17:41 -0800)]
ceph: change "ceph.layout" xattr to be "ceph.file.layout"
The virtual extended attribute named "ceph.layout" is meaningful
only for regular files. Change its name to be "ceph.file.layout" to
more directly reflect that in the ceph xattr namespace. Preserve
the old "ceph.layout" name for the time being (until we decide it's
safe to get rid of it entirely).
Add a missing initializer for "readonly" in the terminating entry.
Signed-off-by: Alex Elder <elder@dreamhost.com> Reviewed-by: Sage Weil <sage@newdream.net>
Linus Torvalds [Thu, 2 Feb 2012 19:19:03 +0000 (11:19 -0800)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/radeon/kms/blit: fix blit copy for very large buffers
drm/radeon/kms: fix TRAVIS panel setup
drm/radeon: fix use after free in ATRM bios reading code.
drm/radeon/kms: Fix device tree linkage of DP i2c buses too
drm/radeon: Set DESKTOP_HEIGHT register to the framebuffer (not mode) height.
drm/radeon/kms: disable output polling when suspended
drm/nv50/pm: signedness bug in nv50_pm_clocks_pre()
drm/nouveau/gem: fix fence_sync race / oops
drm/nouveau: fix typo on mxmdcb option
drm/nouveau/mxm: pretend to succeed, even if we can't shadow the MXM-SIS
drm/nouveau/disp: check that panel power gpio is enabled at init time
Linus Torvalds [Thu, 2 Feb 2012 19:11:13 +0000 (11:11 -0800)]
Merge branches 'core-urgent-for-linus', 'perf-urgent-for-linus', 'sched-urgent-for-linus' and 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
bugs, x86: Fix printk levels for panic, softlockups and stack dumps
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf top: Fix number of samples displayed
perf tools: Fix strlen() bug in perf_event__synthesize_event_type()
perf tools: Fix broken build by defining _GNU_SOURCE in Makefile
x86/dumpstack: Remove unneeded check in dump_trace()
perf: Fix broken interrupt rate throttling
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/rt: Fix task stack corruption under __ARCH_WANT_INTERRUPTS_ON_CTXSW
sched: Fix ancient race in do_exit()
sched/nohz: Fix nohz cpu idle load balancing state with cpu hotplug
sched/s390: Fix compile error in sched/core.c
sched: Fix rq->nr_uninterruptible update race
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/reboot: Remove VersaLogic Menlow reboot quirk
x86/reboot: Skip DMI checks if reboot set by user
x86: Properly parenthesize cmpxchg() macro arguments
Ilija Hadzic [Thu, 2 Feb 2012 15:26:24 +0000 (10:26 -0500)]
drm/radeon/kms/blit: fix blit copy for very large buffers
Evergreen and NI blit copy was broken if the buffer maps to a rectangle
whose one dimension is 16384 (max dimension allowed by these chips).
In the mainline kernel, the problem is exposed only when buffers are
very large (1G), but it's still a problem. The problem could be exposed
for smaller buffers if anyone modifies the algorithm for rectangle
construction in r600_blit_create_rect() (the reason why someone would
modify that algorithm is to tune the performance of buffer moves).
The root cause was in i2f() function which only operated on range between
0 and 16383. Fix this by extending the range of i2f() function to 0 to
32767.
While at it improve the function so that the range can be easily
extended in the future (if it becomes necessary), cleanup lines
over 80 characters, and replace in-line comments with one strategic
comment that explains the crux of the function.
Credits to michel@daenzer.net for pointing out the root cause of
the bug.
v2: Fix I2F_MAX_INPUT constant definition goof and warn only once
if input argument is out of range. Edit the comment a little
bit to avoid some linguistic confusion and make it look better
in general.
Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Michel Dänzer <michel@daenzer.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
Takashi Iwai [Wed, 1 Feb 2012 09:33:23 +0000 (10:33 +0100)]
ALSA: hda - Allow analog low-current mode when dynamic power-control is on
VIA codecs have several different power-saving features, and one of
them is the analog low-current mode. But it turned out that the ALC
mode causes pop-noises at each on/off time on some machines. As a
quick workaround, disable the ALC when another power-saving feature,
the dynamic pin power-control, is turned off, too, since the dynamic
power-control is already exposed as a mixer enum element so that user
can turn it on/off freely.
Takashi Iwai [Tue, 24 Jan 2012 11:25:50 +0000 (12:25 +0100)]
ALSA: hda - Check power-state before changing in patch_via.c
Instead of always writing AC_VERB_SET_POWER_STATE, check the current
power-state and don't write again if the value is already set.
This may reduce the click noise upon the dynamic power-state change
(e.g. in analog-input mixer).
Linus Torvalds [Thu, 2 Feb 2012 02:30:15 +0000 (18:30 -0800)]
Merge tag 'firewire-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
firewire fixes post v3.3-rc1
Add workarounds table entries for hardware bugs in
- FireWire part of Sound Blaster Audigy cards,
- Ricoh PCIe 1394 controllers.
Without these, several protocols, e.g. AV/C, do not work on the
Audigy, and the Ricoh PCIe controllers wouldn't work at all.
This does not concern the older Ricoh PCI controllers.
* tag 'firewire-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: ohci: disable MSI on Ricoh controllers
firewire: ohci: add reset packet quirk for SB Audigy
Randy Dunlap [Thu, 2 Feb 2012 02:15:49 +0000 (18:15 -0800)]
docbook: fix fatal errors in device-drivers docbook and add DMA Management section
Fix 2 fatal errors in the device-drivers docbook.
Also add some missing files from drivers/base/; since several
of these are DMA-related, add a section for DMA Management.
docproc: drivers/base/sys.c: No such file or directory
docproc: drivers/tty/serial/8250.c: No such file or directory
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Thu, 2 Feb 2012 00:00:38 +0000 (16:00 -0800)]
Merge branch 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
* 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
lib: Fix 32-bit sparc udiv_qrnnd() definition in mpilib's longlong.h
lib: Fix multiple definitions of clz_tab
lib/digsig: checks for NULL return value
lib/mpi: added missing NULL check
lib/mpi: added comment on divide by 0 case
lib/mpi: check for possible zero length
lib/digsig: pkcs_1_v1_5_decode_emsa cleanup
lib/digsig: additional sanity checks against badly formated key payload
lib/mpi: removed unused functions
lib/mpi: checks for zero divisor length
lib/mpi: return error code on dividing by zero
lib/mpi: replaced MPI_NULL with normal NULL
lib/mpi: added missing NULL check
David Miller [Wed, 1 Feb 2012 22:17:55 +0000 (00:17 +0200)]
lib: Fix 32-bit sparc udiv_qrnnd() definition in mpilib's longlong.h
This copy of longlong.h is extremely dated and results in compile
errors on sparc32 when MPILIB is enabled, copy over the more uptodate
implementation from arch/sparc/math/sfp-util_32.h
Reported-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: James Morris <jmorris@namei.org>
Linus Torvalds [Wed, 1 Feb 2012 23:18:39 +0000 (15:18 -0800)]
Merge tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
InfiniBand/RDMA fixes for 3.3:
- Fix a crash due to a regression (uninitialized refcnt) introduced in
3.2 with XRC support.
- Close race in how ucma reports events when connect fails.
- Process vendor-specific MADs in mlx4 so that eg FDR-10 data rate works.
- Fix regression in qib caused by over-aggressive PCIe tuning.
- Other small fixes for hardware drivers (ipath, nes, qib).
* tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
RDMA/nes: Copyright update
IB/mlx4: pass SMP vendor-specific attribute MADs to firmware
RDMA/nes: Fix fast memory registration opcode
RDMA/nes: Fix fast memory registration length
RDMA/ucma: Discard all events for new connections until accepted
IB/qib: Roll back PCIe tuning change
IB/qib: Use GFP_ATOMIC when locks are held
RDMA/nes: Add missing rcu_read_unlock() in nes_addr_resolve_neigh()
RDMA/nes: Fix for sending MPA reject frame
IB/ipath: Calling PTR_ERR() on right variable in create_file()
RDMA/core: Fix kernel panic by always initializing qp->usecnt
Oleg Nesterov [Tue, 31 Jan 2012 16:15:11 +0000 (17:15 +0100)]
proc: make sure mem_open() doesn't pin the target's memory
Once /proc/pid/mem is opened, the memory can't be released until
mem_release() even if its owner exits.
Change mem_open() to do atomic_inc(mm_count) + mmput(), this only
pins mm_struct. Change mem_rw() to do atomic_inc_not_zero(mm_count)
before access_remote_vm(), this verifies that this mm is still alive.
I am not sure what should mem_rw() return if atomic_inc_not_zero()
fails. With this patch it returns zero to match the "mm == NULL" case,
may be it should return -EINVAL like it did before e268337d.
Perhaps it makes sense to add the additional fatal_signal_pending()
check into the main loop, to ensure we do not hold this memory if
the target task was oom-killed.
projects / linux-beck.git / log