Hans Verkuil [Tue, 13 Dec 2016 13:07:17 +0000 (11:07 -0200)]
[media] exynos_hdmi: add CEC notifier support
Implement the CEC notifier support to allow CEC drivers to
be informed when there is a new physical address.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
By using the CEC notifier framework there is no longer any reason
to manually set the physical address. This was the one blocking
issue that prevented this driver from going out of staging, so do
this move as well.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Kieran Bingham [Mon, 27 Feb 2017 13:40:34 +0000 (10:40 -0300)]
[media] v4l: vsp1: Register pipe with output WPF
The DRM object does not register the pipe with the WPF object. This is
used internally throughout the driver as a means of accessing the pipe.
As such this breaks operations which require access to the pipe from WPF
interrupts.
Register the pipe inside the WPF object after it has been declared as
the output.
Laurent Pinchart [Tue, 28 Feb 2017 22:44:55 +0000 (19:44 -0300)]
[media] v4l: vsp1: Disable HSV formats on Gen3 hardware
While all VSP instances can process HSV internally, on Gen3 hardware
reading or writing HSV24 or HSV32 from/to memory causes the device to
hang. Disable those pixel formats on Gen3 hardware.
Kieran Bingham [Fri, 6 Jan 2017 12:15:28 +0000 (10:15 -0200)]
[media] v4l: vsp1: Prevent multiple streamon race commencing pipeline early
With multiple inputs through the BRU it is feasible for the streams to
race each other at stream-on.
Multiple VIDIOC_STREAMON calls racing each other could have process
N-1 skipping over the pipeline setup section and then start the pipeline
early, if videobuf2 has already enqueued buffers to the driver for
process N but not called the .start_streaming() operation yet
In the case of the video pipelines, this
can present two serious issues.
1) A null-dereference if the pipe->dl is committed at the same time as
the vsp1_video_setup_pipeline() is processing
2) A hardware hang, where a display list is committed without having
called vsp1_video_setup_pipeline() first
Repair this issue, by ensuring that only the stream which configures the
pipeline is able to start it.
Hans Verkuil [Wed, 29 Mar 2017 07:56:47 +0000 (09:56 +0200)]
[media] dev-capture.rst/dev-output.rst: video standards ioctls are optional
The documentation for video capture and output devices claims that the video standard
ioctls are required. This is not the case, they are only required for PAL/NTSC/SECAM
type inputs and outputs. Sensors do not implement this at all and e.g. HDMI inputs
implement the DV Timings ioctls.
Just drop the mention of 'video standard' ioctls.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Hans Verkuil [Mon, 12 Dec 2016 14:08:18 +0000 (12:08 -0200)]
[media] ov7670: add devicetree support
Add DT support. Use it to get the reset and pwdn pins (if there are any).
Tested with one sensor requiring reset/pwdn and one sensor that doesn't
have reset/pwdn pins.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
[media] uvcvideo: Add support for Intel SR300 depth camera
Add support for Intel SR300 depth camera in uvc driver.
This includes adding three uvc GUIDs for the required pixel formats
and updating the uvc driver GUID-to-4cc tables with the new formats.
Signed-off-by: Daniel Patrick Johnson <teknotus@teknot.us> Signed-off-by: Aviv Greenberg <avivgr@gmail.com> Signed-off-by: Evgeni Raikhel <evgeni.raikhel@intel.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Johan Hovold [Mon, 13 Mar 2017 12:53:58 +0000 (09:53 -0300)]
[media] cx231xx-audio: fix NULL-deref at probe
Make sure to check the number of endpoints to avoid dereferencing a
NULL-pointer or accessing memory beyond the endpoint array should a
malicious device lack the expected endpoints.
Fixes: e0d3bafd0258 ("V4L/DVB (10954): Add cx231xx USB driver") Cc: stable <stable@vger.kernel.org> # 2.6.30 Cc: Sri Deevi <Srinivasa.Deevi@conexant.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Johan Hovold [Mon, 13 Mar 2017 12:53:56 +0000 (09:53 -0300)]
[media] cx231xx-cards: fix NULL-deref at probe
Make sure to check the number of endpoints to avoid dereferencing a
NULL-pointer or accessing memory beyond the endpoint array should a
malicious device lack the expected endpoints.
Fixes: e0d3bafd0258 ("V4L/DVB (10954): Add cx231xx USB driver") Cc: stable <stable@vger.kernel.org> # 2.6.30 Cc: Sri Deevi <Srinivasa.Deevi@conexant.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Johan Hovold [Mon, 13 Mar 2017 12:53:55 +0000 (09:53 -0300)]
[media] usbvision: fix NULL-deref at probe
Make sure to check the number of endpoints to avoid dereferencing a
NULL-pointer or accessing memory beyond the endpoint array should a
malicious device lack the expected endpoints.
Fixes: 2a9f8b5d25be ("V4L/DVB (5206): Usbvision: set alternate interface
modification")
The V4L2_INPUT_TYPE_CAMERA and V4L2_OUTPUT_TYPE_ANALOG descriptions were
hopelessly out of date. Fix this, and also fix a few style issues in these
documents. Finally add the missing documentation for V4L2_OUTPUT_TYPE_ANALOGVGAOVERLAY
(only used by the zoran driver).
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Hans Verkuil [Thu, 30 Mar 2017 12:05:25 +0000 (09:05 -0300)]
[media] v4l2-compat-ioctl32: VIDIOC_S_EDID should return all fields on error
Most ioctls do not have to write back the contents of the argument
if an error is returned. But VIDIOC_S_EDID is an exception together
with the EXT_CTRLS ioctls (already handled correctly).
Add this exception to v4l2-compat-ioctl32.
This fixes a compliance error when using compat32 and trying to
set a new EDID with more blocks than the hardware supports. In
that case the driver will return -E2BIG and set edid.blocks to the
actual maximum number of blocks. This field was never copied back
to userspace due to this bug.
Signed-off-by: Hans Verkuil <hansverk@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Hans Verkuil [Wed, 29 Mar 2017 07:59:12 +0000 (04:59 -0300)]
[media] video.rst: a sensor is also considered to be a physical input
Add the line "Camera sensors are also considered to be a video input."
In practice all non-MC drivers for sensors support the input ioctls, and the
compliance test actually tests for the presence of these ioctls. So clarify
the documentation by explicitly mentioning sensors.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Arnd Bergmann [Mon, 20 Mar 2017 09:47:55 +0000 (06:47 -0300)]
[media] vcodec: mediatek: mark pm functions as __maybe_unused
When CONFIG_PM is disabled, we get a couple of unused functions:
drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c:927:13: error: 'mtk_jpeg_clk_off' defined but not used [-Werror=unused-function]
static void mtk_jpeg_clk_off(struct mtk_jpeg_dev *jpeg)
^~~~~~~~~~~~~~~~
drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c:916:13: error: 'mtk_jpeg_clk_on' defined but not used [-Werror=unused-function]
static void mtk_jpeg_clk_on(struct mtk_jpeg_dev *jpeg)
Rather than adding more error-prone #ifdefs around those, this patch
removes the existing #ifdef checks and marks the PM functions as __maybe_unused
to let gcc do the right thing.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Rick Chang <rick.chang@mediatek.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Marek Szyprowski [Wed, 22 Mar 2017 10:34:28 +0000 (07:34 -0300)]
[media] s5p-mfc: Don't allocate codec buffers from pre-allocated region
Further investigation revealed that codec buffers also don't need to
be allocated at higher addresses than firmware base for MFC v6+ hardware.
Those buffers can be quite large and its size depends on the selected
format and framesize. This patch changes the way the codec buffers are
allocated - driver will use generic allocator for them instead of the
pre-allocated buffer for firmware and contexts.
Marek Szyprowski [Wed, 22 Mar 2017 07:53:57 +0000 (04:53 -0300)]
[media] s5p-mfc: Fix unbalanced call to clock management
Clock should be turned off after calling s5p_mfc_init_hw() from the
watchdog worker, like it is already done in the s5p_mfc_open() which also
calls this function.
Marek Szyprowski [Mon, 20 Mar 2017 10:49:24 +0000 (07:49 -0300)]
[media] s5p-mfc: Rename BANK1/2 to BANK_L/R to better match documentation
Documentation for MFC hardware still uses 'left' and 'right' names for
the memory channel/banks, so replace BANK1/2 defines with more appropriate
BANK_L/R names.
Marek Szyprowski [Mon, 13 Feb 2017 10:58:14 +0000 (08:58 -0200)]
[media] s5p-mfc: Use preallocated block allocator always for MFC v6+
It turned out that all versions of MFC v6+ hardware doesn't have a strict
requirement for ALL buffers to be allocated on higher addresses than the
firmware base like it was documented for MFC v5. This requirement is true
only for the device and per-context buffers. All video data buffers can be
allocated anywhere for all MFC v6+ versions. Basing on this fact, the
special DMA configuration based on two reserved memory regions is not
really needed for MFC v6+ devices, because the memory requirements for the
firmware, device and per-context buffers can be fulfilled by the simple
probe-time pre-allocated block allocator introduced in previous patch.
This patch enables support for such pre-allocated block based allocator
always for MFC v6+ devices. Due to the limitations of the memory management
subsystem the largest supported size of the pre-allocated buffer when no
CMA (Contiguous Memory Allocator) is enabled is 4 MiB.
This patch also removes the requirement to provide two reserved memory
regions for MFC v6+ devices in device tree. Now the driver is fully
functional without them.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Andrzej Hajda <a.hajda@samsung.com> Tested-by: Smitha T Murthy <smitha.t@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Marek Szyprowski [Mon, 13 Feb 2017 10:47:51 +0000 (08:47 -0200)]
[media] s5p-mfc: Remove special configuration of IOMMU domain
The main reason for using special configuration of IOMMU domain was the
problem with MFC firmware, which failed to operate properly when placed
at 0 DMA address. Instead of adding custom code for configuring each
variant of IOMMU domain and architecture specific glue code, simply use
what arch code provides and if the DMA base address equals zero, skip
first 128 KiB to keep required alignment. This patch also make the driver
operational on ARM64 architecture, because it no longer depends on ARM
specific DMA-mapping and IOMMU glue code functions.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Andrzej Hajda <a.hajda@samsung.com> Tested-by: Smitha T Murthy <smitha.t@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Marek Szyprowski [Mon, 13 Feb 2017 10:57:11 +0000 (08:57 -0200)]
[media] s5p-mfc: Add support for probe-time preallocated block based allocator
Current MFC driver depends on the fact that when IOMMU is available, the
DMA-mapping framework and its IOMMU glue will use first-fit allocator.
This was true for ARM architecture, but its not for ARM64 arch. However, in
case of MFC v6+ hardware and latest firmware, it turned out that there is
no strict requirement for ALL buffers to be allocated on higher addresses
than the firmware base. This requirement is true only for the device and
per-context buffers. All video data buffers can be allocated anywhere for
all MFC v6+ versions.
Such relaxed requirements for the memory buffers can be easily fulfilled
by allocating firmware, device and per-context buffers from the probe-time
preallocated larger buffer. This patch adds support for it. This way the
driver finally works fine on ARM64 architecture. The size of the
preallocated buffer is 8 MiB, what is enough for three instances H264
decoders or encoders (other codecs have smaller memory requirements).
If one needs more for particular use case, one can use "mem" module
parameter to force larger (or smaller) buffer (for example by adding
"s5p_mfc.mem=16M" to kernel command line).
[mchehab@s-opensource.com: fix two checkpatch warnings: don't initialize
static to NULL; don't use S_foo permisions]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Andrzej Hajda <a.hajda@samsung.com> Tested-by: Smitha T Murthy <smitha.t@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
[media] s5p-mfc: Reduce firmware buffer size for MFC v6+ variants
Firmware for MFC v6+ variants is not larger than 400 KiB, so there is no
need to allocate a full 1 MiB buffer for it. Reduce it to 512 KiB to keep
proper alignment of allocated buffer.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Andrzej Hajda <a.hajda@samsung.com> Tested-by: Smitha T Murthy <smitha.t@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
[media] s5p-mfc: Allocate firmware with internal private buffer alloc function
Once firmware buffer has been converted to use s5p_mfc_priv_buf structure,
it is possible to allocate it with existing s5p_mfc_alloc_priv_buf()
function. This change will help to reduce code variants in the next
patches.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Andrzej Hajda <a.hajda@samsung.com> Tested-by: Smitha T Murthy <smitha.t@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
[media] s5p-mfc: Move firmware allocation to DMA configure function
To complete DMA memory configuration for MFC device, allocation of the
firmware buffer is needed, because some parameters are dependant on its base
address. Till now, this has been handled in the s5p_mfc_alloc_firmware()
function. This patch moves that logic to s5p_mfc_configure_dma_memory() to
keep DMA memory related operations in a single place. This way
s5p_mfc_alloc_firmware() is simplified and does what it name says. The
other consequence of this change is moving s5p_mfc_alloc_firmware() call
from the s5p_mfc_probe() function to the s5p_mfc_configure_dma_memory().
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Andrzej Hajda <a.hajda@samsung.com> Tested-by: Smitha T Murthy <smitha.t@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Change parameters for s5p_mfc_alloc_priv_buf() and s5p_mfc_release_priv_buf()
functions. Instead of DMA device pointer and a base, provide common MFC
device structure and memory bank context identifier.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Andrzej Hajda <a.hajda@samsung.com> Tested-by: Smitha T Murthy <smitha.t@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
[media] s5p-mfc: Replace bank1/bank2 entries with an array
Internal MFC driver device structure contains two entries for keeping
addresses of the DMA memory banks. Replace them with the dma_base[] array
and use defines for accessing particular banks. This will help to simplify
code in the next patches.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Andrzej Hajda <a.hajda@samsung.com> Tested-by: Smitha T Murthy <smitha.t@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
[media] s5p-mfc: Replace mem_dev_* entries with an array
Internal MFC driver device structure contains two pointers to devices used
for DMA memory allocation: mem_dev_l and mem_dev_r. Replace them with the
mem_dev[] array and use defines for accessing particular banks. This will
help to simplify code in the next patches.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Andrzej Hajda <a.hajda@samsung.com> Tested-by: Smitha T Murthy <smitha.t@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Marek Szyprowski [Thu, 23 Feb 2017 11:43:27 +0000 (08:43 -0300)]
[media] s5p-mfc: Fix race between interrupt routine and device functions
Interrupt routine must wake process waiting for given interrupt AFTER
updating driver's internal structures and contexts. Doing it in-between
is a serious bug. This patch moves all calls to the wake() function to
the end of the interrupt processing block to avoid potential and real
races, especially on multi-core platforms. This also fixes following issue
reported from clock core (clocks were disabled in interrupt after being
unprepared from the other place in the driver, the stack trace however
points to the different place than s5p_mfc driver because of the race):
WARNING: CPU: 1 PID: 18 at drivers/clk/clk.c:544 clk_core_unprepare+0xc8/0x108
Modules linked in:
CPU: 1 PID: 18 Comm: kworker/1:0 Not tainted 4.10.0-next-20170223-00070-g04e18bc99ab9-dirty #2154
Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
Workqueue: pm pm_runtime_work
[<c010d8b0>] (unwind_backtrace) from [<c010a534>] (show_stack+0x10/0x14)
[<c010a534>] (show_stack) from [<c033292c>] (dump_stack+0x74/0x94)
[<c033292c>] (dump_stack) from [<c011cef4>] (__warn+0xd4/0x100)
[<c011cef4>] (__warn) from [<c011cf40>] (warn_slowpath_null+0x20/0x28)
[<c011cf40>] (warn_slowpath_null) from [<c0387a84>] (clk_core_unprepare+0xc8/0x108)
[<c0387a84>] (clk_core_unprepare) from [<c0389d84>] (clk_unprepare+0x24/0x2c)
[<c0389d84>] (clk_unprepare) from [<c03d4660>] (exynos_sysmmu_suspend+0x48/0x60)
[<c03d4660>] (exynos_sysmmu_suspend) from [<c042b9b0>] (pm_generic_runtime_suspend+0x2c/0x38)
[<c042b9b0>] (pm_generic_runtime_suspend) from [<c0437580>] (genpd_runtime_suspend+0x94/0x220)
[<c0437580>] (genpd_runtime_suspend) from [<c042e240>] (__rpm_callback+0x134/0x208)
[<c042e240>] (__rpm_callback) from [<c042e334>] (rpm_callback+0x20/0x80)
[<c042e334>] (rpm_callback) from [<c042d3b8>] (rpm_suspend+0xdc/0x458)
[<c042d3b8>] (rpm_suspend) from [<c042ea24>] (pm_runtime_work+0x80/0x90)
[<c042ea24>] (pm_runtime_work) from [<c01322c4>] (process_one_work+0x120/0x318)
[<c01322c4>] (process_one_work) from [<c0132520>] (worker_thread+0x2c/0x4ac)
[<c0132520>] (worker_thread) from [<c0137ab0>] (kthread+0xfc/0x134)
[<c0137ab0>] (kthread) from [<c0107978>] (ret_from_fork+0x14/0x3c)
---[ end trace 1ead49a7bb83f0d8 ]---
[media] s5p-mfc: Fix initialization of internal structures
Initialize members of the internal device and context structures as early
as possible to avoid access to uninitialized objects on initialization
failures. If loading firmware or creating of the hardware instance fails,
driver will access device or context queue in error handling path, which
might not be initialized yet, what causes kernel panic. Fix this by moving
initialization of all static members as early as possible.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
[media] tveeprom: get rid of documentation of an unused parameter
Changeset 446aba663b82 ("[media] tveeprom: get rid of unused arg
on tveeprom_hauppauge_analog()") removed the now unused I2C adapter
struct from struct tveeprom. Remove the corresponding kernel-doc
tag.
Fixes: 446aba663b82 ("[media] tveeprom: get rid of unused arg on tveeprom_hauppauge_analog()") Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Elena Reshetova [Mon, 6 Mar 2017 14:21:00 +0000 (11:21 -0300)]
[media] vb2: convert vb2_vmarea_handler refcount from atomic_t to refcount_t
Use refcount_t to manage the refcount to the memory type specific buffer
videobuf2 buffer implementations. refcount_t is better suitable for the
purpose than atomic_t.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Hans Verkuil [Mon, 27 Mar 2017 08:36:53 +0000 (05:36 -0300)]
[media] vivid: fix g_edid implementation
The VIDIOC_G_EDID implementation in vivid didn't take edid->start_block into account when
copying the EDID data.
Make sure that the internal EDID is updated with the correct CEC physical address. Currently
the returned EDID is updated, but that will only work well if edid->start_block is 0.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Jose Abreu [Fri, 24 Mar 2017 16:47:52 +0000 (13:47 -0300)]
[media] cec: Add cec_get_drvdata()
Add a helper function to get driver private data from CEC
adapter. This helps the readability a little bit and allows
to change the 'priv' field name to something else without
needing to touch all drivers.
Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Colin Ian King [Wed, 22 Mar 2017 16:32:01 +0000 (13:32 -0300)]
[media] usb: au0828: remove redundant code
The check for ret being non-zero is false as ret is always
zero, hence we have redundant dead code that can be removed.
Detected with CoverityScan, CID#112968 ("Constant' variable guards
dead code (DEADCODE)'")
Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The extra pairs of parentheses are not needed and cause clang
warnings like this:
drivers/media/platform/mtk-vcodec/venc/venc_vp8_if.c:158:32: error: equality comparison with extraneous parentheses [-Werror,-Wparentheses-equality]
if ((inst->work_bufs[i].size == 0))
~~~~~~~~~~~~~~~~~~~~~~~~^~~~
drivers/media/platform/mtk-vcodec/venc/venc_vp8_if.c:158:32: note: remove extraneous parentheses around the comparison to silence this warning
if ((inst->work_bufs[i].size == 0))
~ ^ ~
drivers/media/platform/mtk-vcodec/venc/venc_vp8_if.c:158:32: note: use '=' to turn this equality comparison into an assignment
if ((inst->work_bufs[i].size == 0))
^~
=
Minghsiu Tsai [Tue, 14 Mar 2017 14:21:22 +0000 (11:21 -0300)]
[media] media: mtk-jpeg: fix continuous log "Context is NULL"
The symptom is continuous log "mtk-jpeg 18004000.jpegdec: Context is NULL"
in kernel log. It is because the error handling in irq doesn't clear
interrupt.
The calling flow like as below when issue happen
mtk_jpeg_device_run()
mtk_jpeg_job_abort()
v4l2_m2m_job_finish() -> m2m_dev->curr_ctx = NULL;
mtk_jpeg_dec_irq()
v4l2_m2m_get_curr_priv()
-> m2m_dev->curr_ctx == NULL
-> return NULL
log "Context is NULL"
There is race condition between job_abort() and irq. In order to simplify
code, don't want to add extra flag to maintain state, empty job_abort() and
clear interrupt before v4l2_m2m_get_curr_priv() in irq.
Signed-off-by: Minghsiu Tsai <minghsiu.tsai@mediatek.com> Acked-by: Rick Chang <rick.chang@mediatek.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Make sure to check the number of endpoints to avoid accessing memory
beyond the endpoint array should a device lack the expected endpoints.
Note that, as far as I can tell, the gspca framework has already made
sure there is at least one endpoint in the current alternate setting so
there should be no risk for a NULL-pointer dereference here.
Fixes: b517af722860 ("V4L/DVB: gspca_konica: New gspca subdriver for
konica chipset using cams")
Cc: stable <stable@vger.kernel.org> # 2.6.37 Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Colin Ian King [Tue, 7 Mar 2017 14:30:47 +0000 (11:30 -0300)]
[media] atmel-isc: fix off-by-one comparison and out of bounds read issue
The are only HIST_ENTRIES worth of entries in hist_entry however the
for-loop is iterating one too many times leasing to a read access off
the end off the array ctrls->hist_entry. Fix this by iterating by
the correct number of times.
Detected by CoverityScan, CID#1415279 ("Out-of-bounds read")
Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Sean Young [Tue, 7 Mar 2017 20:09:11 +0000 (17:09 -0300)]
[media] staging: lirc_sasem: remove
This driver was merged in 2010 and never had the necessary work done
to promote it out of staging (port to rc-core), so remove it.
I have not managed to track down the hardware. If anyone has the
hardware and would like a driver for it, please contact me and
hopefully we can work together to write a new driver.
Signed-off-by: Sean Young <sean@mess.org> Cc: Oliver Stabel <oliver.stabel@gmx.de> Cc: Tim Davies <tim@opensystems.net.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Sean Young [Tue, 7 Mar 2017 19:13:15 +0000 (16:13 -0300)]
[media] staging: sir: remove unselectable Tekram and Actisys
Support for these sir ports is not compiled in by default, it has to
be enabled by manually defining LIRC_TEKRAM, LIRC_SIR_ACTISYS_ACT200L
or LIRC_SIR_ACTISYS_ACT220L somewhere. This cannot be done from Kconfig
at all so remove them from the driver.
Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
projects / karo-tx-linux.git / log