Allan Stephens [Wed, 2 Nov 2011 14:32:14 +0000 (10:32 -0400)]
tipc: Minor optimization to rejection of connection-based messages
Modifies message rejection logic so that TIPC doesn't attempt to
send a FIN message to the rejecting port if it is known in advance
that there is no such message because the rejecting port doesn't exist.
Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Allan Stephens [Fri, 28 Oct 2011 16:03:00 +0000 (12:03 -0400)]
tipc: Eliminate alteration of publication key during name table purging
Removes code that alters the publication key of a name table entry
that is being forcibly purged from TIPC's name table after contact
with the publishing node has been lost.
Current TIPC ensures that all defunct names are purged before
re-establishing contact with a failed node. There used to be a risk
that the publication might be accidentally deleted because it might be
re-added to the name table before the purge operation was completed.
But now there is no longer a need to ensure that the new key is different
than the old one.
Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Allan Stephens [Thu, 27 Oct 2011 20:43:09 +0000 (16:43 -0400)]
tipc: Prevent loss of fragmented messages over broadcast link
Modifies broadcast link so that an incoming fragmented message is not
lost if reassembly cannot begin because there currently is no buffer
big enough to hold the entire reassembled message. The broadcast link
now ignores the first fragment completely, which causes the sending node
to retransmit the first fragment so that reassembly can be re-attempted.
Previously, the sender would have had no reason to retransmit the 1st
fragment, so we would never have a chance to re-try the allocation.
To do this cleanly without duplicaton, a new bclink_accept_pkt()
function is introduced.
Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Allan Stephens [Thu, 27 Oct 2011 20:31:26 +0000 (16:31 -0400)]
tipc: Prevent loss of fragmented messages over unicast links
Modifies unicast link endpoint logic so an incoming fragmented message
is not lost if reassembly cannot begin because there is no buffer big
enough to hold the entire reassembled message. The link endpoint now
ignores the first fragment completely, which causes the sending node to
retransmit the first fragment so that reassembly can be re-attempted.
Previously, the sender would have had no reason to retransmit the 1st
fragment, so we would never have a chance to re-try the allocation.
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Allan Stephens [Thu, 27 Oct 2011 18:17:53 +0000 (14:17 -0400)]
tipc: Major redesign of broadcast link ACK/NACK algorithms
Completely redesigns broadcast link ACK and NACK mechanisms to prevent
spurious retransmit requests in dual LAN networks, and to prevent the
broadcast link from stalling due to the failure of a receiving node to
acknowledge receiving a broadcast message or request its retransmission.
Note: These changes only impact the timing of when ACK and NACK messages
are sent, and not the basic broadcast link protocol itself, so inter-
operability with nodes using the "classic" algorithms is maintained.
The revised algorithms are as follows:
1) An explicit ACK message is still sent after receiving 16 in-sequence
messages, and implicit ACK information continues to be carried in other
unicast link message headers (including link state messages). However,
the timing of explicit ACKs is now based on the receiving node's absolute
network address rather than its relative network address to ensure that
the failure of another node does not delay the ACK beyond its 16 message
target.
2) A NACK message is now typically sent only when a message gap persists
for two consecutive incoming link state messages; this ensures that a
suspected gap is not confirmed until both LANs in a dual LAN network have
had an opportunity to deliver the message, thereby preventing spurious NACKs.
A NACK message can also be generated by the arrival of a single link state
message, if the deferred queue is so big that the current message gap
cannot be the result of "normal" mis-ordering due to the use of dual LANs
(or one LAN using a bonded interface). Since link state messages typically
arrive at different nodes at different times the problem of multiple nodes
issuing identical NACKs simultaneously is inherently avoided.
3) Nodes continue to "peek" at NACK messages sent by other nodes. If
another node requests retransmission of a message gap suspected (but not
yet confirmed) by the peeking node, the peeking node forgets about the
gap and does not generate a duplicate retransmit request. (If the peeking
node subsequently fails to receive the lost message, later link state
messages will cause it to rediscover and confirm the gap and send another
NACK.)
4) Message gap "equality" is now determined by the start of the gap only.
This is sufficient to deal with the most common cases of message loss,
and eliminates the need for complex end of gap computations.
5) A peeking node no longer tries to determine whether it should send a
complementary NACK, since the most common cases of message loss don't
require it to be sent. Consequently, the node no longer examines the
"broadcast tag" field of a NACK message when peeking.
Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Allan Stephens [Wed, 26 Oct 2011 20:13:35 +0000 (16:13 -0400)]
tipc: Add missing locks in broadcast link statistics accumulation
Ensures that all attempts to update broadcast link statistics are done
only while holding the lock that protects the link's main data structures,
to prevent interference by simultaneous updates caused by messages
arriving on other interfaces.
Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Allan Stephens [Wed, 26 Oct 2011 19:57:26 +0000 (15:57 -0400)]
tipc: Fix bug in broadcast link duplicate message statistics
Modifies broadcast link so that it increments the "received duplicate
message" count if an incoming message cannot be added to the deferred
message queue because it is already present in the queue. (The aligns
broadcast link behavior with that of TIPC's unicast links.)
Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Allan Stephens [Wed, 26 Oct 2011 19:33:44 +0000 (15:33 -0400)]
tipc: Fix node lock reclamation issues in broadcast link reception
Fixes a pair of problems in broadcast link message reception code
relating to the reclamation of the node lock after consuming an
in-sequence message.
1) Now retests to see if the sending node is still up after reclaiming
the node lock, and bails out if it is non-operational.
2) Now manipulates the node's deferred message queue only after
reclaiming the node lock, rather than using queue head pointer
information that was cached previously.
Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Allan Stephens [Wed, 26 Oct 2011 15:41:45 +0000 (11:41 -0400)]
tipc: Add missing broadcast link lock when sending NACK
Ensures that any attempt to send a NACK message over TIPC's broadcast
link has exclusive access to the link's main data structures, to prevent
interference with a simultaneous attempt to send other broadcast link
traffic (such as application-generated multicast messages).
Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Allan Stephens [Wed, 26 Oct 2011 14:55:16 +0000 (10:55 -0400)]
tipc: Fix problem with broadcast link synchronization between nodes
Corrects a problem in which a link endpoint that activates as the
result of receiving a RESET/STATE sequence of link protocol messages
fails to properly record the broadcast link status information about
the node to which it is now communicating with. (The problem does
not occur with the more common RESET/ACTIVATE sequence of messages.)
The fix ensures that the broadcast link status info is updated after
the RESET message resets the link endpoint, rather than before, thereby
preventing new information from being overwritten by the reset operation.
Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Allan Stephens [Tue, 25 Oct 2011 19:14:46 +0000 (15:14 -0400)]
tipc: Ensure broadcast link re-acquires node after link failure
Fix a bug that can prevent TIPC from sending broadcast messages to a node
if contact with the node is lost and then regained. The problem occurs if
the broadcast link first clears the flag indicating the node is part of the
link's distribution set (when it loses contact with the node), and later
fails to restore the flag (when contact is regained); restoration fails
if contact with the node is regained by implicit unicast link activation
triggered by the arrival of a data message, rather than explicitly by the
arrival of a link activation message.
The broadcast link now uses separate fields to track whether a node is
theoretically capable of receiving broadcast messages versus whether it is
actually part of the link's distribution set. The former member is updated
by the receipt of link protocol messages, which can occur at any time; the
latter member is updated only when contact with the node is gained or lost.
This change also permits the simplification of several conditional
expressions since the broadcast link's "supported" field can now only be
set if there are working links to the associated node.
Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Allan Stephens [Tue, 25 Oct 2011 16:19:05 +0000 (12:19 -0400)]
tipc: Prevent broadcast link stalling in dual LAN environments
Ensure that sequence number information about incoming broadcast link
messages is initialized only by the activation of the first link to a
given cluster node. Previously, a race condition allowed reset and/or
activation messages for a second link to re-initialize this sequence
number information with obsolete values. This could trigger TIPC to
request the retransmission of previously acknowledged broadcast link
messages from that node, resulting in broadcast link processing becoming
stalled if the node had already released one or more of those messages
and was unable to perform the required retransmission.
Thanks to Laser <gotolaser@gmail.com> for identifying this problem
and assisting in the development of this fix.
Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Allan Stephens [Tue, 25 Oct 2011 15:20:26 +0000 (11:20 -0400)]
tipc: Prevent transmission of outdated link protocol messages
Ensures that a link endpoint discards any previously deferred link
protocol message whenever it attempts to send a new one.
Previously, it was possible for a link protocol message that was unsent
due to congestion to be transmitted after newer protocol messages had
been sent. The stale link protocol message might then cause the receiving
link endpoint to malfunction because of its outdated conent.
Thanks to Osamu Kaminuma [okaminum@avaya.com] for diagnosing the problem
and contributing a prototype patch.
Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Allan Stephens [Tue, 25 Oct 2011 14:44:35 +0000 (10:44 -0400)]
tipc: improve the link deferred queue insertion algorithm
Re-code the algorithm for inserting an out-of-sequence message into
a unicast or broadcast link's deferred message queue. It remains
functionally equivalent but should be easier to understand/maintain.
Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Michael Chan [Sun, 5 Feb 2012 15:24:40 +0000 (15:24 +0000)]
cnic: Add FCoE parity error recovery
When bnx2x returns error on FCoE SPQ messages, generate an error
completion to bnx2fc immediately to speed up error recovery. This
will eliminate length timeouts and spped up the reset of the device.
Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vlad Zolotarov [Sun, 5 Feb 2012 15:24:39 +0000 (15:24 +0000)]
bnx2: Add missing memory barrier in bnx2_start_xmit()
Sync DMA descriptor before hitting the TX mailbox for weak memory model
CPUs.
There has been discussions several years ago about this. Some believe
that writel() should guarantee ordering. Others want explicit barriers
if necessary. Today writel() does not have the ordering guarantee and
many other drivers use explicit barriers.
Signed-off-by: Vlad Zolotarov <vlad@scalemp.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Haiyang Zhang [Sun, 5 Feb 2012 12:13:10 +0000 (12:13 +0000)]
net/hyperv: Remove the unnecessary memset in rndis_filter_send()
The memory has been allocated by kzalloc, so it's unnecessary to memset
again.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Haiyang Zhang [Sun, 5 Feb 2012 12:13:09 +0000 (12:13 +0000)]
net/hyperv: Correct the assignment in netvsc_recv_callback()
The first assignment to variable "net" is wrong, but overridden by the
latter assignments. So the bug isn't manifested.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Haiyang Zhang [Sun, 5 Feb 2012 12:13:08 +0000 (12:13 +0000)]
net/hyperv: Convert camel cased variables in rndis_filter.c to lower cases
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Neil Horman [Fri, 3 Feb 2012 05:18:43 +0000 (05:18 +0000)]
netprio_cgroup: Fix obo in get_prioidx
It was recently pointed out to me that the get_prioidx function sets a bit in
the prioidx map prior to checking to see if the index being set is out of
bounds. This patch corrects that, avoiding the possiblity of us writing beyond
the end of the array
Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Reported-by: Stanislaw Gruszka <sgruszka@redhat.com> CC: Stanislaw Gruszka <sgruszka@redhat.com> CC: "David S. Miller" <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
be2net: Use new implementation of get mac list command
VFs use get mac list command to get their mac address. The format of
this command has changed. Update driver to use the new format.
Signed-off-by: Mammatha Edhala <mammatha.edhala@emulex.com> Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Version number in query link status command is getting overwritten in
be_wrb_cmd_hdr_prepare() routine. Move the initialization to fix this
issue. Also initialize the domain field.
Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Implement RX flip buffer in the cfhsi_rx_done function,
piggy-backed frames is also supported.
This gives a significant performance gain for CAIF over HSI.
Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Neel Patel [Fri, 3 Feb 2012 08:25:14 +0000 (08:25 +0000)]
enic: Enable support for multiple hardware receive queues
This patch enables support for multiple receive queues. If multiple receive
queues are used ingress traffic is hashed into one of the receive queues based
on IP or TCP or both headers. The max number of supported receive queues per
vnic is 8.
Signed-off-by: Neel Patel <neepatel@cisco.com> Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: Nishank Trivedi <nistrive@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Sritej Velaga [Fri, 3 Feb 2012 14:06:48 +0000 (14:06 +0000)]
qlge: Updating Schultz LICENSE.qlge file.
Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Manish chopra [Fri, 3 Feb 2012 13:45:44 +0000 (13:45 +0000)]
qlcnic: Fix API unlock
Log dump status.
Remove unmatched qlcnic_api_unlock call.
Update version to 5.0.26.
Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Sritej Velaga [Fri, 3 Feb 2012 13:45:43 +0000 (13:45 +0000)]
qlcnic: Fix firmware abort code check.
Check bits 8-28 of peg_halt status register for firmware abort code.
Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Sritej Velaga [Fri, 3 Feb 2012 13:45:41 +0000 (13:45 +0000)]
qlcnic: Stop pause ctrl frames on fw hang.
When firmware hang is detected, fw should stop sending pause control frames.
Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Mitch A Williams [Tue, 17 Jan 2012 04:09:05 +0000 (04:09 +0000)]
igbvf: change copyright date
Change copyright date to 2012 in the source files.
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Robert E Garrett <robertX.e.garrett@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Greg Rose [Fri, 6 Jan 2012 02:53:30 +0000 (02:53 +0000)]
ixgbevf: Update copyright notices
Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Robert E Garrett <robertX.e.garrett@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Greg Rose [Wed, 1 Feb 2012 01:28:15 +0000 (01:28 +0000)]
ixgbevf: Fix mailbox interrupt ack bug
Remove jump to out label that was skipping over code to replace the
ack bit in the mailbox cache variable. This was causing driver mailbox
routines that poll for the PF to ack a message to time out which would
in turn cause all other mailbox messages to fail. Also replace the
mailbox cache variable message indication bit when a message is found
so that other functions that choose to poll for a mailbox message from
the PF won't miss it.
Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Robert E Garrett <robertX.e.garrett@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Greg Rose [Thu, 5 Jan 2012 07:58:11 +0000 (07:58 +0000)]
ixgbe: Add warning when no space left for more MAC filters
Send message to system log when the VF requests another MAC filter
but there is no space left on the device for it.
Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Robert E Garrett <robertX.e.garrett@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Don Skidmore [Fri, 6 Jan 2012 03:24:16 +0000 (03:24 +0000)]
ixgbe: update copyright to 2012
New year so bump the copyright date.
Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Tomoya MORINAGA [Fri, 27 Jan 2012 11:05:22 +0000 (20:05 +0900)]
can: Kconfig: add more information about Intel EG20T PCH CAN controller
Current menu description, not easy to understand what the description
means. So, add information about the device.
Signed-off-by: Tomoya MORINAGA <tomoya.rohm@gmail.com>
[mkl: Added space before opening parentheses in Kconfig.
Make commit message more descriptive.] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Reuben Dowle [Mon, 31 Oct 2011 22:18:03 +0000 (11:18 +1300)]
can: flexcan: Fix CAN_RAW_RECV_OWN_MSGS and CAN_RAW_LOOPBACK
Currently the flexcan driver uses hardware local echo. This blindly
echos all transmitted frames to all receiving sockets, regardless what
CAN_RAW_RECV_OWN_MSGS and CAN_RAW_LOOPBACK are set to.
This patch now submits transmitted frames to be echoed in the transmit
complete interrupt, preserving the reference to the sending
socket. This allows the can protocol to correctly handle the local
echo.
Further this patch moves tx_bytes statistic accounting into the tx_complete
handler.
Signed-off-by: Reuben Dowle <reuben.dowle@navico.com>
[mkl: move tx_bytes accounting into tx_complete handler; cleanups] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
can: dev: let can_get_echo_skb() return dlc of CAN frame
can_get_echo_skb() is usually called in the TX complete handler.
The stats->tx_packets and stats->tx_bytes should be updated there, too.
This patch simplifies to figure out the size of the sent CAN frame.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
can: peak_pci: Fix the way channels are linked together
Change the way channels objects are linked together by peak_pci_probe()
avoiding any kernel oops when driver is removed. Side effect is that
the list is now browsed from last to first channel.
Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Xi Wang [Mon, 12 Dec 2011 07:16:20 +0000 (02:16 -0500)]
can: pch_can: fix error passive level test
The test (((errc & PCH_REC) >> 8) > 127) would always be false because
the receive error counter ((errc & PCH_REC) >> 8) is at most 127, where
PCH_REC is defined as 0x7f00. To test whether the receive error counter
has reached the error passive level, the RP bit (15) should be used.
Signed-off-by: Xi Wang <xi.wang@gmail.com> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
can: cc770: store echo skb before starting the transfer
On slow systems and high CAN bitrates, the error message
"can_put_echo_skb: BUG! echo_skb is occupied!" did show up because
can_put_echo_skb() was called after starting the transfer.
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
can: flexcan: fix irq flooding by clearing all interrupt sources
As pointed out by Reuben Dowle and Lothar Waßmann, the TWRN_INT,
RWRN_INT, BOFF_INT interrupt sources need to be cleared as well
to avoid interrupt flooding, at least for the Flexcan on i.MX28
SOCs. Furthermore, the interrupts are only cleared, if really one
of those interrupt sources are pending (which is not the case for
rx and tx done).
Cc: Reuben Dowle <Reuben.Dowle@navico.com> Cc: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Danny Kukawka [Thu, 2 Feb 2012 03:20:28 +0000 (03:20 +0000)]
eicon: fix -Warray-bounds warning
Fix for a -Warray-bounds warning. mixer_notify_update() tries to
write to ((CAPI_MSG *) msg)->info.facility_req.structs[3] while
structs is defined as byte structs[1]. Set all 'structs' which are
part of the typdefs in the info union to 'byte structs[0]'.
v2: set all info.*.structs to byte structs[0]
Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de> Signed-off-by: David S. Miller <davem@davemloft.net>
David Miller [Wed, 1 Feb 2012 10:49:17 +0000 (10:49 +0000)]
qeth: Move away from using neighbour entries in qeth_l3_fill_header()
We've moving to a model where dst_entry objects to not have
a reference to the associated neighbour entry, instead such
neighbours must be looked up on-demand.
Here in qeth_l3_fill_header() it's actually much simpler to
use the information in the route itself. The code is
already conditionalized upon protocol type.
Signed-off-by: David S. Miller <davem@davemloft.net> Tested-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Always use cfmuxl_remove_uplayer when removing a up-layer.
cfmuxl_ctrlcmd() can be called independently and in parallel with
cfmuxl_remove_uplayer(). The race between them could cause list_del_rcu
to be called on a node which has been already taken out from the list.
That lead to a (rare) crash on accessing poisoned node->prev inside
list_del_rcu.
This fix ensures that deletion are done holding the same lock.
Reported-by: Dmitry Tarnyagin <dmitry.tarnyagin@stericsson.com> Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Haiyang Zhang [Thu, 2 Feb 2012 07:18:00 +0000 (07:18 +0000)]
net/hyperv: Fix the page buffer when an RNDIS message goes beyond page boundary
There is a possible data corruption if an RNDIS message goes beyond page
boundary in the sending code path. This patch fixes the problem.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Haiyang Zhang [Thu, 2 Feb 2012 07:17:59 +0000 (07:17 +0000)]
net/hyperv: Use netif_tx_disable() instead of netif_stop_queue() when necessary
For code path not on the xmit, use netif_tx_disable() instead of
netif_stop_queue() to ensure other CPUs are not doing xmit.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Julia Lawall [Thu, 2 Feb 2012 04:53:01 +0000 (04:53 +0000)]
drivers/net/ethernet/ti: Move call to PTR_ERR after reassignment
PTR_ERR should be called before its argument is cleared.
The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
expression e,e1;
constant c;
@@
*e = c
... when != e = e1
when != &e
when != true IS_ERR(e)
*PTR_ERR(e)
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Reported-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Yongjun [Wed, 1 Feb 2012 20:17:23 +0000 (20:17 +0000)]
net/hyperv: fix the issue that large packets be dropped under bridge
The packets with size larger than 1452 will be dropped by bridge
which with two hyperv netdevice ports. This cause by hyperv netvsc
driver always copy the trailer padding to the data packet, and then
the skb received from netdevice may include wrong skb->len (20 bytes
larger than the real size normally). The captured packet may like
this:
Ethernet II, Src: Microsof_00:00:07 (00:15:5d:00:00:07),
Dst: HewlettP_00:00:4e (00:1f:29:00:00:4e)
Destination: HewlettP_e6:00:4e (00:1f:29:00:00:4e)
Source: Microsof_f6:6d:07 (00:15:5d:f6:6d:07)
Type: IP (0x0800)
Trailer: 1415161718191A1B1C1D1E1F20212223
Frame check sequence: 0x24252627 [incorrect, should be 0x7c2e5a5e]
The following command help to reproduction it, and the ping ICMP
packets will be dropped by bridge.
$ ping ip -s 1453
This patch fixed it by removing the trailer padding from the data
packet.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
Change details:
- Implement ethtool flash_device() entry point to write the
firmware image to the flash firmware partition.
Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Reviewed-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 1 Feb 2012 22:23:11 +0000 (17:23 -0500)]
atm: clip: Convert over to dst_neigh_lookup().
CLIP only support ipv4, and this is evidenced by the fact that it
is a device specific extension of arp_tbl, so this conversion is
pretty straightforward.
Signed-off-by: David S. Miller <davem@davemloft.net>
Eliad Peller [Wed, 1 Feb 2012 16:48:09 +0000 (18:48 +0200)]
mac80211: timeout a single frame in the rx reorder buffer
The current code checks for stored_mpdu_num > 1, causing
the reorder_timer to be triggered indefinitely, but the
frame is never timed-out (until the next packet is received)
Signed-off-by: Eliad Peller <eliad@wizery.com> Cc: <stable@vger.kernel.org> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
iwlwifi: don't mess up QoS counters with non-QoS frames
In my AMPDU rework, I rely on the sequence numbers of frames. But
I didn't check that the frame has a valid tid before updating the
tracking counters. As a result, the Tx queues were stalled. People
who hit this bug saw that we simply didn't let any data out.
This bug was introduced in 3.3.
This patch fixes that and checks that the frame is a QoS frame before
looking at its tid and changing the counters.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Hauke Mehrtens [Tue, 31 Jan 2012 23:13:53 +0000 (00:13 +0100)]
ssb: fix cardbus slot in hostmode
ssb supports one extra device on the cardbus. This results in two
devices in total, one beeing the host controller itself and the other
the external device connected to the hostcontroller over cardbus.
This makes the cardbus slot work on the Linksys WRT150N.
Reported-by: Aaron Z <aaronz@pls-net.org> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Luigi Tarenga [Tue, 31 Jan 2012 17:51:23 +0000 (18:51 +0100)]
rt2800lib: fix wrong -128dBm when signal is stronger than -12dBm
This patch correct the type of variables containing the rssi
values read from the rxwi.
In function rt2800_agc_to_rssi() 3 variables (rssi0, rssi1, rss2)
defined as int was assigned a 16bit signed values as unsigned.
From a test with a hi-gain antenna I verified that the rxwi
contains signed rssi values in the range -13/+81 (inclusive)
with 0 as an error condition. In case of negative values a
condition is triggered and the function return -128dBm while
the signal is at its maximum. This patch correct the cast so
negative values are not treated as very high positive values
(ex. -13 does not become 243).
Signed-off-by: Luigi Tarenga <luigi.tarenga@gmail.com> Reviewed-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Ben Hutchings [Wed, 1 Feb 2012 09:32:25 +0000 (09:32 +0000)]
ethtool: Null-terminate filename passed to ethtool_ops::flash_device
The parameters for ETHTOOL_FLASHDEV include a filename, which ought to
be null-terminated. Currently the only driver that implements
ethtool_ops::flash_device attempts to add a null terminator if
necessary, but does it wrongly. Do it in the ethtool core instead.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
projects / mv-sheeva.git / log