Benjamin Romer [Tue, 29 Jul 2014 15:11:21 +0000 (11:11 -0400)]
staging: unisys: add sysfs entries for parahotplug support
This patch adds new a new directory parahotplug to the visorchipset sysfs
directory, and two new attributes, deviceenabled, and devicedisabled, into the
new directory, to add s-Par parahotplug support.
The parahotplug interface is used to deal with SR-IOV recovery situations on
s-Par guest partitions. The command service partition will send a message to a
guest when an SR-IOV device that guest is using needs to be temporarily removed.
The message triggers a udev event that will cause a recovery script to run.
When that script has completed its work, it will write to one of the
parahotplug interfaces to send a message back to Command, indicating that the
recovery action has completed.
When a guest that is sharing an SR-IOV device is restarted, that guest will
take down the PF driver on the device, but any guests with VFs will not know
that their device needs to be reset as well. The recovery script makes it so
the device will be shut down fully and then restarted after the sharing guest
comes back up, and ensures that the timing is correct.
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Romer [Tue, 29 Jul 2014 15:11:20 +0000 (11:11 -0400)]
staging: unisys: remove parahotplug proc entry
Remove the parahotplug proc code entirely in preparation for replacement with
sysfs entries. Since visorchipset_proc_read_writeonly() is orphaned by the
removal, it is removed as well.
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fixes all sparse warnings "Using plain integer as NULL pointer"
in drivers/staging/lustre
drivers/staging/lustre/lnet/lnet/api-ni.c:1665:32: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lnet/lnet/api-ni.c:1773:35: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/fld/fld_request.c:171:17: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/llite/llite_lib.c:155:30: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/llite/lproc_llite.c:846:11: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/lov/lov_obd.c:902:48: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/lov/lov_obd.c:946:54: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/lov/lov_obd.c:2819:46: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/lov/lov_dev.c:456:66: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/mdc/mdc_request.c:2426:46: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/mdc/mdc_request.c:2569:46: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/mdc/mdc_request.c:2740:46: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/mdc/lproc_mdc.c:175:57: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/mdc/lproc_mdc.c:176:57: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/mdc/lproc_mdc.c:177:57: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/mdc/lproc_mdc.c:178:57: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/mdc/lproc_mdc.c:179:57: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/mdc/lproc_mdc.c:180:57: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/mdc/lproc_mdc.c:181:57: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/mdc/lproc_mdc.c:182:57: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/mdc/lproc_mdc.c:183:57: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/mdc/lproc_mdc.c:185:57: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/mdc/lproc_mdc.c:186:57: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/mdc/lproc_mdc.c:193:66: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/mdc/lproc_mdc.c:194:63: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/mdc/lproc_mdc.c:195:56: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/mdc/lproc_mdc.c:196:51: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/mdc/lproc_mdc.c:197:50: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/mdc/lproc_mdc.c:198:48: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/mdc/lproc_mdc.c:199:57: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/mdc/lproc_mdc.c:200:11: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/mdc/lproc_mdc.c:206:48: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/mdc/lproc_mdc.c:207:11: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/mgc/mgc_request.c:199:9: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/obdclass/linux/linux-module.c:331:11: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/obdclass/obd_config.c:1164:53: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/obdclass/obd_config.c:1306:71: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/obdclass/llog_test.c:943:62: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/obdclass/llog_test.c:944:65: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/obdecho/echo_client.c:3116:46: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/osc/osc_request.c:3424:46: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/osc/osc_request.c:3548:46: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/osc/osc_request.c:3615:46: warning: Using plain integer as NULL pointer
Signed-off-by: Radek Dostal <rd@radekdostal.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: ii_pci20kc: use the comedi_device 'mmio' member
Use the new 'mmio' member in the comedi_device for the __iomem * base
address.
Since this was the only member in the private data, remove the struct
and its allocation.
This legacy driver is a bit strange. The base address of the board is
passed to the (*attach) using by the user using the comedi_config
utiltiy. This base address is currently not ioremap'ed and is simply
cast to a void __iomem *. I'm not sure if this is correct. Add a
comment so it will be addressed later.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: ni_labpc: use the comedi_device 'mmio' member
Use the new 'mmio' member in the comedi_device for the ioremap'ed
base address.
Only the ni_labpc_pci module does the ioremap, its also the only
module that sets the 'has_mmio' member in the boardinfo. Remove
this member from the boardinfo and use dev->mmio to determine if
the I/O is memory mapped.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: mite: pass comedi_device to mite_setup()
For aesthetics, pass the comedi_device to mite_setup() and mite_setup2()
so that the dev->class_dev can be used in the dev_{level} message to make
the messages have consistancy with the other comedi drivers.
Remove the extra dev_warn() noise in the drivers when mite_setup() fails.
Rename the 'use_iodwbsr_1' parameter and change it to a bool.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: add an 'mmio' member to comedi_device
All the comedi drivers that use memory mapped io currently have a
void __iomem * member in their private data for the driver. For
some of the drivers this is actually the only member in that data.
For convienence, add a new member to the comedi_device for this
void __iomem *.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Tue, 29 Jul 2014 11:58:26 +0000 (12:58 +0100)]
staging: comedi: amplc_pci230: tidy up stuct pci230_private
Align the member comments a bit better in the declaration of `struct
pci230_private`. Also remove the heading comment as it is just a
boilerplate comedi comment.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Tue, 29 Jul 2014 11:58:25 +0000 (12:58 +0100)]
staging: comedi: amplc_pci230: no need to initialize named members to zero
The members of the elements of `pci230_boards[]` that are not explicitly
named in their initializers will be initialized to 0 automatically, so
there is no need to initialize them to 0 explicitly.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Tue, 29 Jul 2014 11:58:18 +0000 (12:58 +0100)]
staging: comedi: amplc_pci230: add whitespace to register values
Several macros are defined for bit-field values within hardware
registers. They are defined as left-shifted values. Add some
whitespace around the left-shift operator.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The macro `PCI230_ADC_CONV` is never used. Just remove it. (At one
time, the value was written to the `PCI230_ADCSWTRIG` register to
trigger a conversion, but any value would do, and the driver no longer
uses that register to trigger conversions anyway.)
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Tue, 29 Jul 2014 11:58:14 +0000 (12:58 +0100)]
staging: comedi: amplc_pci230: usleep_range is preferred over udelay
Fix checkpatch issue: "CHECK: usleep_range is preferred over udelay; see
Documentation/timers/timers-howto.txt". I picked 100 us as a reasonable
upper bound, but it's not that critical.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The external callers of ni_tio_acknowledge_and_confirm() only call
this function to ack any pending errors or interrupts before starting
a new async command. Only the internal code in ni_tiocmd uses the
data that is optionally returned by this function.
Remove the export from ni_tio_acknowledge_and_confirm() and introduce
a new exported function that handles passing the NULL params.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: ni_tiocmd: tidy up ni_tio_input_cmd()
The cmd->start_src is validated in the (*do_cmdtest) before this
function is called. All valid trigger sources are handled so the
default BUG() case can never occure.
For aesthetics, refactor the switch into if/else tests and remove
the BUG().
For aesthetics, rename the local variable 'retval' to simply 'ret'.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 28 Jul 2014 12:09:35 +0000 (13:09 +0100)]
staging: comedi: amplc_pc236, amplc_pci236: get rid of bustype
The `bustype` member of `struct pc236_board` variables is initialized,
but never used. Remove it along with the enumerated constants
associated with it.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 28 Jul 2014 12:09:34 +0000 (13:09 +0100)]
staging: comedi: amplc_pc236: split into ISA, PCI and common module
The "amplc_pc236" driver currently handles both ISA and PCI devices and
uses a small amount of conditional compilation depending which are
enabled.
Move most of the functionality into a new module, "amplc_pc236_common",
and split off support for PCI devices into a new module, "amplc_pci236".
Retain support for ISA devices in the existing module, "amplc_pc236".
Since the `detach` handler (`pc236_detach()`) in the existing module
"amplc_pc236" now only needs to handle ISA devices and only calls
`comedi_legacy_detach()`, just use `comedi_legacy_detach()` directly as
the `detach` handler in `struct comedi_driver amplc_pc236_driver`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
`pc236_intr_enable()` and `pc236_intr_disable()` are very similar.
Combine them into a single function `pc236_intr_update()` with a
parameter to indicate whether interrupts are being enabled or disabled.
Change type type of the `enable_irq` member of the private data to
`bool` to match the parameter.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 28 Jul 2014 12:09:31 +0000 (13:09 +0100)]
staging: comedi: amplc_pc236: add callback to enable/disable interrupt
Add an optional callback function pointer to the board data to be called
when interrupts are logically enabled or disabled to update the hardware
registers.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 28 Jul 2014 12:09:30 +0000 (13:09 +0100)]
staging: comedi: amplc_pc236: don't disable h/w interrupt on detach()
If an asynchronous command was running when the device is being
detached, the comedi core would have called the subdevice `cancel`
handler (`pc236_intr_cancel()`) before calling the `detach` handler
(`pc236_detach()`). Since the cancel handler disables hardware
interrupts (at least for the PCI236 board) by calling
`pc236_disable_intr()`, there is no need for the detach handler to do so
as well. Remove the call to `pc236_disable_intr()` from
`pc236_detach()`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 25 Jul 2014 17:07:09 +0000 (18:07 +0100)]
staging: comedi: amplc_dio200_pci: no need to test board pointer in dio200_pci_detach()
`dio200_pci_detach()` doesn't need to check if the pointer to constant
board data (`thisboard`) and the pointer to private per-device data
(`devpriv`) are valid before calling `amplc_dio200_common_detach()`. It
has no further need to check `thisboard` so remove the variable
altogether. Move the test of `devpriv` to the first point it is needs
to be valid.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 25 Jul 2014 17:07:08 +0000 (18:07 +0100)]
staging: comedi: amplc_dio200_common: remove some tests from amplc_dio200_common_detach()
`amplc_dio200_common_detach()` doesn't do much apart from freeing the
IRQ handler that was requested by `amplc_dio200_common_attach()` if
`dev->irq` is non-zero. There is no need to check if the pointer to
the constant board data or the pointer to private per-device data
exist, so remove those tests.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 25 Jul 2014 17:07:07 +0000 (18:07 +0100)]
staging: comedi: amplc_dio200_common: prevent extra free_irq()
`dio200_detach()` in "amplc_dio200.c" calls
`amplc_dio200_common_detach()` in "amplc_dio200_common.c", followed by
`comedi_legacy_detach()` in "../drivers.c". Both of those functions
call `free_irq()` if `dev->irq` is non-zero. The second call produces a
warning message because the handler has already been freed. Prevent
that by setting `dev->irq = 0` in `amplc_dio200_common_detach()`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fabian Frederick [Wed, 23 Jul 2014 19:04:38 +0000 (21:04 +0200)]
staging: ion: vm_insert_pfn and zap_page_range rely on CONFIG_MMU
Fix following sh-allmodconfig errors reported on kisskb
"
drivers/built-in.o: In function `ion_vm_fault':
ion.c:(.text+0x1f2d8f8): undefined reference to `vm_insert_pfn'
drivers/built-in.o: In function `ion_buffer_sync_for_device':
ion.c:(.text+0x1f316bc): undefined reference to `zap_page_range'
make: *** [vmlinux] Error 1
"
Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Looks like no one's working on the driver anymore, so remove it for now.
If someone wants to work on moving it out of staging, this commit can be
reverted.
Signed-off-by: Kristina Martšenko <kristina.martsenko@gmail.com> Cc: Alan Cox <alan@linux.intel.com> Cc: Mark A. Allyn <mark.a.allyn@intel.com> Cc: Jayant Mangalampalli <jayant.mangalampalli@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marc Fite [Sun, 27 Jul 2014 18:31:08 +0000 (20:31 +0200)]
staging: lustre: lov: Fix sparse warning using plain integer as NULL pointer
This patch fixes the warning generated by sparse: "Using plain integer as NULL pointer" by replacing the offending 0s with NULL.
drivers/staging/lustre/lustre/lov/lov_obd.c:902:48: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/lov/lov_obd.c:946:54: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/lov/lov_obd.c:2819:46: warning: Using plain integer as NULL pointer
Signed-off-by: Marc Fite <marc@fite.cat> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / linux-beck.git / log