staging: comedi: adl_pci9118: use comedi_async 'scans_done' to detect EOA
The comedi core now counts the number of samples added to the async buffer and
detects the end-of-scan and increments the comedi_async 'scans_done' counter.
Remove the private data member 'ai_act_scan' and use the 'scans_done' member
to detect the end-of-acquisition.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: addi_tcw.h: provide generic defines for the ADDI-DATA TCW
The TCW (timer/counter/watchdog) devices in the various ADDI-DATA drivers
use a common register map definition. Provide a common generic define for
these registers so they don't have to be replicated in each driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: addi_apci_1564: fix timer iobase for all PLD revisions
The APCI-1564 has different I/O mapping depending on if the PLD revision
is Rev 1.0 or Rev 2.x.
Add a member, 'timer', to the private data for the base address of the
12-bit timer. Fix the register defines so they will work for all PLD
revisions and initialize the devpriv->timer appropriately.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: addi_apci_1564: fix dev->iobase for all PLD revisions
The APCI-1564 has different I/O mapping depending on if the PLD revision is
Rev 1.0 or Rev 2.x.
Fix the main register defines so they will work for all PLD revisions and
initialie the dev->iobase appropriately. Move the register defines to the
main driver source file.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: addi_apci_1564: detect PLD revision for I/O mapping
The APCI-1564 has different I/O mapping depending on if the PLD revision is
Rev 1.0 or Rev 2.x. The revision can be determined by reading the EEPROM
register at offset 0x00 of PCI BAR 0 and checking the value of bits 7 to 4.
Add this check to apci1564_auto_attach(). Currently this driver is coded
to work with the Rev 2.x I/O mapping. For now, fail the attach if a Rev 1.0
PLD is detected. Document the I/O mapping for both revisions.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: addi_apci_1564: store PCI BAR 1 base address in private data
According to ADDI-DATA, only the PLD Revision 2.x versions of the APCI-1564
have the 3 counters. The base address for these counters is found in PCI BAR 1.
For aesthetics, save this base address in the private data. The dev->iobase
can then be used for the main registers of the board.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: addi_apci_1564: use correct I/O base for APCI1564_DI_INT_STATUS_REG
The APCI1564_DI_INT_STATUS_REG is located in the PCI BAR 0 I/O space. That
base address is stored in devpriv->amcc_iobase. Use that to correctly read
the register.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: addi_apci_1564: board does not use an AMCC PCI controller
According to ADDI-DATA, the APCI-1564 board has a FPGA with a PCI core, it
does not use an AMCC PCI controller chip.
Remove the amcc_s5933.h include as well as the read of the AMCC_OP_REG_INTCSR
register. That offset would actually read APCI1564_WDOG_STATUS_REG register
in the FPGA which has nothing to do with the interrupt status.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A rather obvious typo in one of the identifier has been found. This patch
fixes the typo and ensures any lines changed do not exceed 80 characters
as indicated by scripts/checkpatch.pl
Signed-off-by: Krzysztof Konopko <kris@konagma.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rtw_led.* files include Free Software Foundation's mailing address in
the sample GPL notice. This is not desired and picked when running
scripts/checkpatch.pl.
Signed-off-by: Krzysztof Konopko <kris@konagma.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Markus Elfring [Mon, 24 Nov 2014 21:58:48 +0000 (22:58 +0100)]
staging: olpc_dcon: Deletion of a check before backlight_device_unregister()
The backlight_device_unregister() function tests whether its argument is NULL
and then returns immediately. Thus the test around the call is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aaro Koskinen [Fri, 7 Nov 2014 20:44:58 +0000 (22:44 +0200)]
staging: octeon-ethernet: drop multiple NAPI instances
Octeon Ethernet driver is currently trying to wake up multiple
CPU cores for parallel NAPI processing when needed, to cope
with the fact that all network interfaces are handled through
the same receive queue processed by a single core/interrupt
(see http://marc.info/?l=linux-kernel&m=137209784914565&w=2).
This partially overlaps with generic RPS functionality.
Commit a6a39a7fcff5 ("staging: octeon-ethernet: disable load balance
for receiving packet when CONFIG_RPS is enabled") already disabled this
when RPS is enabled. Let's delete this code altogether as it has issues
like packet reordering and potential problems with CPU offlining/onlining.
Tested on EdgeRouter Lite.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-By: David Daney <david.daney@cavium.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andreas Ruprecht [Sun, 23 Nov 2014 13:37:51 +0000 (14:37 +0100)]
staging: lustre: ldlm: Fix indentation errors for switch-case
checkpatch complains about two indentation errors where the case
statements are on a higher indentation level than the corresponding
switch statement. This patch removes these errors.
Signed-off-by: Andreas Ruprecht <rupran@einserver.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andreas Ruprecht [Sun, 23 Nov 2014 13:37:49 +0000 (14:37 +0100)]
staging: lustre: ldlm: Fix overlong lines
checkpatch complains about a number of lines which are over the
80 character line limit. This patch changes most of them to comply,
the few remaining lines with warnings are not changed for readability
reasons.
Signed-off-by: Andreas Ruprecht <rupran@einserver.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aleh Suprunovich [Mon, 17 Nov 2014 10:22:41 +0000 (13:22 +0300)]
staging: rtl8723au: fix sparse warning
drivers/staging/rtl8723au/hal/rtl8723a_hal_init.c:747:1: warning: symbol
'rtl8723a_EfusePgPacketRead' was not declared. Should it be static?
Function 'rtl8723a_EfusePgPacketRead' seems to be unused in current
staging code.
Before, it was available as 'static s32 Hal_EfusePgPacketRead',
but code that was using it removed, in the same commit as rename and
signature change to 'bool rtl8723a_EfusePgPacketRead' has taken place.
staging: lustre: Fix sparse warnings for lnet/lnet/router.c
Fix the following sparse errors:
drivers/staging/lustre/lnet/lnet/router.c:756:1: warning: symbol 'lnet_wait_known_routerstate' was not declared. Should it be static?
drivers/staging/lustre/lnet/lnet/router.c:788:1: warning: symbol 'lnet_update_ni_status_locked' was not declared. Should it be static?
drivers/staging/lustre/lnet/lnet/router.c:828:1: warning: symbol 'lnet_destroy_rc_data' was not declared. Should it be static?
drivers/staging/lustre/lnet/lnet/router.c:848:16: warning: symbol 'lnet_create_rc_data_locked' was not declared. Should it be static?
drivers/staging/lustre/lnet/lnet/router.c:1228:1: warning: symbol 'lnet_destroy_rtrbuf' was not declared. Should it be static?
drivers/staging/lustre/lnet/lnet/router.c:1238:15: warning: symbol 'lnet_new_rtrbuf' was not declared. Should it be static?
drivers/staging/lustre/lnet/lnet/router.c:1274:1: warning: symbol 'lnet_rtrpool_free_bufs' was not declared. Should it be static?
drivers/staging/lustre/lnet/lnet/router.c:1303:1: warning: symbol 'lnet_rtrpool_alloc_bufs' was not declared. Should it be static?
drivers/staging/lustre/lnet/lnet/router.c:1337:1: warning: symbol 'lnet_rtrpool_init' was not declared. Should it be static?
Juston Li [Wed, 19 Nov 2014 01:03:51 +0000 (17:03 -0800)]
staging: lustre: mdc: use __FMODE_EXEC macro
FMODE_EXEC is type fmode_t but is used in operations
with integers which leads to sparse warnings:
drivers/staging/lustre/lustre/mdc/mdc_lib.c:198:21: warning: restricted fmode_t degrades to integer
drivers/staging/lustre/lustre/mdc/mdc_locks.c:300:49: warning: restricted fmode_t degrades to integer
Fix by using __FMODE_EXEC macro defined in fs.h.
Note the same warnings occurs with other fmode flags
here but they don't have a corresponding int macro.
Changes since v1:
remove ifdefs. FMODE_EXEC and __FMODE_EXEC should
always be defined in fs.h
Signed-off-by: Juston Li <juston.h.li@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Domagoj Trsan [Mon, 17 Nov 2014 08:44:56 +0000 (09:44 +0100)]
staging: skein: fix sparse warnings related to shift operator
Fix warnings:
drivers/staging/skein/skein_base.h:89:30: warning: shift too big (50) for type int
...
drivers/staging/skein/skein_base.h:89:30: warning: shift too big (39)for type int
drivers/staging/skein/skein_base.h:89:19: warning: too many warnings
Chen Gang [Sun, 9 Nov 2014 03:54:06 +0000 (11:54 +0800)]
drivers: staging: lustre: Kconfig: Let LUSTRE_LLITE_LLOOP depend on all !"*_64K*" page
It does not support 64K page, so let it disabled for 64K page under all
architectures. The related error (with allmodconfig under tile):
CC [M] drivers/staging/lustre/lustre/llite/lloop.o
In file included from drivers/staging/lustre/lustre/llite/../include/../../include/linux/libcfs/libcfs.h:160:0,
from drivers/staging/lustre/lustre/llite/../include/lustre_lib.h:52,
from drivers/staging/lustre/lustre/llite/lloop.c:106:
drivers/staging/lustre/lustre/llite/lloop.c: In function 'loop_set_fd':
drivers/staging/lustre/lustre/llite/../include/../../include/linux/libcfs/libcfs_private.h:411:54: error: duplicate case value
#define CLASSERT(cond) do {switch (42) {case (cond): case 0: break; } } while (0)
^
drivers/staging/lustre/lustre/llite/lloop.c:525:2: note: in expansion of macro 'CLASSERT'
CLASSERT(PAGE_CACHE_SIZE < (1 << (sizeof(unsigned short) * 8)));
^
drivers/staging/lustre/lustre/llite/../include/../../include/linux/libcfs/libcfs_private.h:411:41: error: previously used here
#define CLASSERT(cond) do {switch (42) {case (cond): case 0: break; } } while (0)
^
drivers/staging/lustre/lustre/llite/lloop.c:525:2: note: in expansion of macro 'CLASSERT'
CLASSERT(PAGE_CACHE_SIZE < (1 << (sizeof(unsigned short) * 8)));
^
Use "find ./ | grep Kconfig | xargs grep --color 64K" to find all 64K
page macros.
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Niklas Svensson [Sat, 8 Nov 2014 15:49:18 +0000 (16:49 +0100)]
staging: skein: fixed sparse warnings related to static declarations
drivers/staging/skein/skein_generic.c:30:5: warning: symbol 'skein256_update' was not declared. Should it be static?
drivers/staging/skein/skein_generic.c:65:5: warning: symbol 'skein512_update' was not declared. Should it be static?
drivers/staging/skein/skein_generic.c:100:5: warning: symbol 'skein1024_update' was not declared. Should it be static?
Signed-off-by: Niklas Svensson <nks@flawful.org> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Torvalds [Sun, 9 Nov 2014 22:49:56 +0000 (14:49 -0800)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- enable bpf syscall for compat
- cpu_suspend fix when checking the idle state type
- defconfig update
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: defconfig: update defconfig for 3.18
arm64: compat: Enable bpf syscall
arm64: psci: fix cpu_suspend to check idle state type for index
Linus Torvalds [Sun, 9 Nov 2014 22:46:36 +0000 (14:46 -0800)]
Merge tag 'armsoc-for-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"Another quiet week:
- a fix to silence edma probe error on non-supported platforms from
Arnd
- a fix to enable the PL clock for Parallella, to make mainline
usable with the SDK.
- a somewhat verbose fix for the PLL clock tree on VF610
- enabling of SD/MMC on one of the VF610-based boards (for testing)
- a fix for i.MX where CONFIG_SPI used to be implicitly enabled and
now needs to be added to the defconfig instead
- another maintainer added for bcm2835: Lee Jones"
* tag 'armsoc-for-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: dts: zynq: Enable PL clocks for Parallella
dma: edma: move device registration to platform code
ARM: dts: vf610: add SD node to cosmic dts
MAINTAINERS: update bcm2835 entry
ARM: imx: Fix the removal of CONFIG_SPI option
ARM: imx: clk-vf610: define PLL's clock tree
Linus Torvalds [Sun, 9 Nov 2014 22:30:24 +0000 (14:30 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull btrfs fix from Chris Mason:
"It's a one liner for an error cleanup path that leads to crashes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: fix kfree on list_head in btrfs_lookup_csums_range error cleanup
Linus Torvalds [Sun, 9 Nov 2014 22:11:58 +0000 (14:11 -0800)]
Merge tag 'driver-core-3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are 3 tiny fixes for 3.18-rc4.
One fixes up a long-stading race condition in the driver core for
removing directories in /sys/devices/virtual/ and the other 2 fix up
the wording of a new Kconfig option that was added in 3.18-rc1"
* tag 'driver-core-3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
tiny: rename ENABLE_DEV_COREDUMP to ALLOW_DEV_COREDUMP
tiny: reverse logic for DISABLE_DEV_COREDUMP
sysfs: driver core: Fix glue dir race condition by gdp_mutex
Linus Torvalds [Sun, 9 Nov 2014 22:11:07 +0000 (14:11 -0800)]
Merge tag 'staging-3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are some staging/iio fixes for 3.18-rc4.
Nothing major, just a few bugfixes of things that have been reported"
* tag 'staging-3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging:iio:ade7758: Remove "raw" from channel name
staging:iio:ade7758: Fix check if channels are enabled in prenable
staging:iio:ade7758: Fix NULL pointer deref when enabling buffer
iio: as3935: allocate correct iio_device size
io: accel: kxcjk-1013: Fix iio_event_spec direction
iio: tsl4531: Fix compiler error when CONFIG_PM_OPS is not defined
iio: adc: mxs-lradc: Disable the clock on probe failure
iio: st_sensors: Fix buffer copy
staging:iio:ad5933: Drop "raw" from channel names
staging:iio:ad5933: Fix NULL pointer deref when enabling buffer
Linus Torvalds [Sun, 9 Nov 2014 22:07:30 +0000 (14:07 -0800)]
Merge tag 'tty-3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are some tiny serial/tty fixes for 3.18-rc4 that resolve some
reported issues"
* tag 'tty-3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: Fix pty master poll() after slave closes v2
serial: of-serial: fix uninitialized kmalloc variable
tty/vt: don't set font mappings on vc not supporting this
tty: serial: 8250_mtk: Fix quot calculation
tty: Prevent "read/write wait queue active!" log flooding
tty: Fix high cpu load if tty is unreleaseable
serial: Fix divide-by-zero fault in uart_get_divisor()
Linus Torvalds [Sun, 9 Nov 2014 22:05:53 +0000 (14:05 -0800)]
Merge tag 'usb-3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some USB fixes for 3.18-rc4.
Just a bunch of little fixes resolving reported issues and new device
ids for existing drivers. Full details are in the shortlog"
* tag 'usb-3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (26 commits)
USB: Update default usb-storage delay_use value in kernel-parameters.txt
USB: cdc-acm: add quirk for control-line state requests
phy: omap-usb2: Enable runtime PM of omap-usb2 phy properly
USB: storage: Fix timeout in usb_stor_euscsi_init() and usb_stor_huawei_e220_init()
USB: cdc-acm: only raise DTR on transitions from B0
Revert "storage: Replace magic number with define in usb_stor_euscsi_init()"
usb: core: notify disconnection when core detects disconnect
usb: core: need to call usb_phy_notify_connect after device setup
uas: Add US_FL_NO_ATA_1X quirk for 2 more Seagate models
xhci: no switching back on non-ULT Haswell
USB: quirks: enable device-qualifier quirk for yet another Elan touchscreen
USB: quirks: enable device-qualifier quirk for another Elan touchscreen
MAINTAINERS: Remove duplicate entry for usbip driver
usb: storage: fix build warnings !CONFIG_PM
usb: Remove references to non-existent PLAT_S5P symbol
uas: Add NO_ATA_1X for VIA VL711 devices
xhci: Disable streams on Asmedia 1042 xhci controllers
USB: HWA: fix a warning message
uas: Add US_FL_NO_ATA_1X quirk for 1 more Seagate model
usb-storage: handle a skipped data phase
...
Andreas Färber [Thu, 6 Nov 2014 17:22:10 +0000 (18:22 +0100)]
ARM: dts: zynq: Enable PL clocks for Parallella
The Parallella board comes with a U-Boot bootloader that loads one of
two predefined FPGA bitstreams before booting the kernel. Both define an
AXI interface to the on-board Epiphany processor.
Enable clocks FCLK0..FCLK3 for the Programmable Logic by default.
Otherwise accessing, e.g., the ESYSRESET register freezes the board,
as seen with the Epiphany SDK tools e-reset and e-hw-rev, using /dev/mem.
Cc: <stable@vger.kernel.org> # 3.17.x Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Olof Johansson <olof@lixom.net>
projects / linux-beck.git / log