Daniel Vetter [Mon, 1 Jul 2013 20:01:04 +0000 (22:01 +0200)]
drm/mm: WARN for unclean mm takedown
The usual drm driver has tons of different drm_mm memory managers so the drm
error message in dmesg is pretty useless. WARN instead so that we have the full
backtrace.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
the failure case handling was fixed up. But in the case when we
already had the buffer exported it changed the return value:
Previously we've return 0 on success, now we return the fd.
This ABI change has been caught by i-g-t/prime_self_import/with_one_bo.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=66436 Cc: YoungJun Cho <yj44.cho@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Tested-by: lu hua <huax.lu@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: YoungJun Cho <yj44.cho@samsung.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
David Herrmann [Mon, 1 Jul 2013 18:32:58 +0000 (20:32 +0200)]
drm: make drm_mm_init() return void
There is no reason to return "int" as this function never fails.
Furthermore, several drivers (ast, sis) already depend on this.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Tue, 2 Jul 2013 03:31:26 +0000 (13:31 +1000)]
Merge branch 'drm-next-3.11' of git://people.freedesktop.org/~agd5f/linux into drm-next
A few more patches for 3.11:
- add debugfs interface to check current DPM state
- Fix a bug that caused problems with DPM on BTC+ asics.
* 'drm-next-3.11' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon/dpm: add debugfs support for SI
drm/radeon/dpm: add debugfs support for cayman
drm/radeon/dpm: add debugfs support for TN
drm/radeon/dpm: add debugfs support for ON/LN
drm/radeon/dpm: add debugfs support for 7xx/evergreen/btc
drm/radeon/dpm: add debugfs support for rv6xx
drm/radeon/dpm: add infrastructure to support debugfs info
drm/radeon/dpm: re-enable state transitions for Cayman
drm/radeon/dpm: re-enable state transitions for BTC
drm/radeon: fix typo in radeon_atom_init_mc_reg_table()
drm/radeon/atom: fix endian bug in radeon_atom_init_mc_reg_table()
drm/radeon: remove sumo dpm/uvd bringup leftovers
Dave Airlie [Mon, 1 Jul 2013 04:10:20 +0000 (14:10 +1000)]
Merge branch 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-next
- Various fixes that make surviving concurrent piglit more possible.
- Buffer object deletion no longer synchronous
- Context/register initialisation updates that have been reported to
solve some stability issues (particularly on some problematic GF119
chips)
- Kernel side support for VP2 video decoding engines
* 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: (44 commits)
drm/nvd0-/disp: handle case where display engine is missing/disabled
drm/gr/nvc0-: merge nvc0/nve0 ucode, and use cpp instead of m4
drm/nouveau/bsp/nv84: initial vp2 engine implementation
drm/nouveau/vp/nv84: initial vp2 engine implementation
drm/nouveau/core: xtensa engine base class implementation
drm/nouveau/vdec: fork vp3 implementations from vp2
drm/nouveau/core: move falcon class to engine/
drm/nouveau/kms: don't fail if there's no dcb table entries
drm/nouveau: remove limit on gart
drm/nouveau/vm: perform a bar flush when flushing vm
drm/nvc0/gr: cleanup register lists, and add nvce/nvcf to switches
drm/nvc8/gr: update initial register/context values
drm/nvc4/gr: update initial register/context values
drm/nvc1/gr: update initial register/context values
drm/nvc3/gr: update initial register/context values
drm/nvc0/gr: update initial register/context values
drm/nvd9/gr: update initial register/context values
drm/nve4/gr: update initial register/context values
drm/nvc0-/gr: bump maximum gpc/tpc limits
drm/nvf0/gr: initial register/context setup
...
Ben Skeggs [Thu, 27 Jun 2013 03:59:01 +0000 (13:59 +1000)]
drm/nouveau/core: move falcon class to engine/
Not really "core" per-se. About to merge Ilia's work adding another
similar class for the VP2 xtensa engines, so, seems like a good time to
move all these to engine/.
Ben Skeggs [Tue, 5 Mar 2013 00:53:54 +0000 (10:53 +1000)]
drm/nouveau/devinit: move simple pll setting routines to devinit
These are pretty much useless for reclocking purposes. Lets make it
clearer what they're for and move them to DEVINIT to signify they're
for the very simple PLL setting requirements of running the init
tables.
Dave Airlie [Mon, 1 Jul 2013 00:08:45 +0000 (10:08 +1000)]
Merge branch 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next
Feature summary:
Add S3C64XX SoC series support - S3C64XX SoC series are previous version
chips of Exynos SoC series. With this patch set, KMS driver of Exynos drm
supports those chips also.
Update device tree support - This patch set corrects compatible strings,
and adds Exynos5420 SoC support for hdmi subsystem.
Consider CCF (Common Clock Framework) support - With reference to CCF
support, it uses clock_prepare_enable/clock_disable_unprepare instead of
clk_enable/clk_disable for hdmi subsystem.
Big cleanups - This patch just removes unnecessary all debug logs.
* 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: (22 commits)
ARM: dts: change compatible strings for EXYNOS5250 hdmi subsystem
drm/exynos: add support for exynos5420 mixer
drm/exynos: add new compatible strings for hdmi subsystem
drm/exynos: fix interlace resolutions for exynos5420
drm/exynos: use of_get_named_gpio to get hdmi hpd gpio
drm/exynos: make sure to handle an error case to vm_mmap call
drm/exynos: exynos_drm_ipp: Remove redundant break statement
drm/exynos: add mout_hdmi clock in hdmi driver to change parent
drm/exynos: Prepare/Unprepare HDMI subsystem clocks
drm/exynos: Clean up logs for DRM_ERROR / DRM_DEBUG_KMS
drm/exynos: Remove tracking log functions
drm/exynos: hdmi: use drm_display_mode to check the supported modes
drm/exynos: fimd: Add support for S3C64xx SoCs
drm/exynos: fimd: Add support for FIMD variants with clock selection
drm/exynos: fimd: Add support for FIMD versions without SHADOWCON register
drm/exynos: fimd: Hold pointer to driver data in context struct
drm/exynos: do not use mode_set_base function directly
drm/exynos: Remove redundant use of of_match_ptr macro
drm/exynos: remove ignoring return value warning in hdmi
drm/exynos: fix WINDOWS_NR checking to vidi driver
...
Rahul Sharma [Wed, 19 Jun 2013 12:51:09 +0000 (18:21 +0530)]
ARM: dts: change compatible strings for EXYNOS5250 hdmi subsystem
This patch renames the combatible strings for hdmi, mixer, ddc
and hdmiphy. It follows the convention of using compatible string
which represent the SoC in which the IP was added for the first
time.
Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
Rahul Sharma [Wed, 19 Jun 2013 12:51:07 +0000 (18:21 +0530)]
drm/exynos: add new compatible strings for hdmi subsystem
This patch adds new combatible strings for hdmi, mixer, ddc
and hdmiphy. It follows the convention of using compatible string
which represent the SoC in which the IP was added for the first
time.
Drivers continue to support the previous compatible strings
but further addition of these compatible strings in device tree
is deprecated.
Rahul Sharma [Tue, 18 Jun 2013 12:49:37 +0000 (18:19 +0530)]
drm/exynos: fix interlace resolutions for exynos5420
Modified code for calculating hdmi IP register values from drm timing
values. The modification is based on the inputs from hw team and specifically
proposed for 1440x576i and 1440x480i. But same changes holds good for other
interlaced resolutions also.
Rahul Sharma [Tue, 11 Jun 2013 14:11:29 +0000 (19:41 +0530)]
drm/exynos: use of_get_named_gpio to get hdmi hpd gpio
Cleanup by removing flags variable from drm_hdmi_dt_parse_pdata
which is not used anywhere. Swtiching to of_get_named_gpio instead
of of_get_named_gpio_flags solved this.
Inki Dae [Fri, 14 Jun 2013 08:54:27 +0000 (17:54 +0900)]
drm/exynos: make sure to handle an error case to vm_mmap call
vm_mmap function returns unsigned long so addr type should be unsigned long.
a pointer or address variable is required to use unsigned long or uint64_t
type for 64bits address support.
So this patch makes sure that addr has unsigned long type and also
exynos_drm_gem_mmap_ioctl returns correct error type.
Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
'break' after goto statement is redundant. Silences the following
message:
drivers/gpu/drm/exynos/exynos_drm_ipp.c:1067 exynos_drm_ipp_check_valid()
info: ignoring unreachable code.
YoungJun Cho [Wed, 12 Jun 2013 01:40:52 +0000 (10:40 +0900)]
drm/exynos: Remove tracking log functions
This patch removes tracking log functions which were used to debug
in the early development stage and are not so important as were.
So remove them for code clean up.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
Rahul Sharma [Mon, 10 Jun 2013 09:20:00 +0000 (14:50 +0530)]
drm/exynos: hdmi: use drm_display_mode to check the supported modes
This patch renames check_timing to check_mode and removes the
unnecessary conversion of drm_display_mode to/from fb_videomode in
the hdmi driver.
v4:
1) Changed the commit message to add information related to renaming
the callbacks to check_mode.
2) Changed debug message to print 1/0 for interlace mode.
v3:
1) Replaced check_timing callbacks with check_mode.
2) Change the type of second parameter of check_mode callback from void
pointer paramenter to struct drm_display_mode pointer.
v2:
1) Removed convert_to_video_timing().
2) Corrected DRM_DEBUG_KMS to print the resolution properly.
Tomasz Figa [Wed, 1 May 2013 19:02:28 +0000 (21:02 +0200)]
drm/exynos: fimd: Add support for FIMD variants with clock selection
Some platforms that can be supported this driver has additional clock
source selection bits in VIDCON0 register that allows to select which
clock should be used to drive the pixel clock: bus clock or special
clock.
Since this driver assumes that special clock always drives the pixel
clock, this patch sets the selection bitfield to use the special clock.
Tomasz Figa [Wed, 1 May 2013 19:02:27 +0000 (21:02 +0200)]
drm/exynos: fimd: Add support for FIMD versions without SHADOWCON register
Some platforms that can be supported with this driver have PRTCON
register instead of SHADOWCON, which requires slightly different
handling.
This patch factors out all register shadow control code from the driver
and adds a function to control register shadowing appropriately,
depending on driver data.
Tomasz Figa [Wed, 1 May 2013 19:02:26 +0000 (21:02 +0200)]
drm/exynos: fimd: Hold pointer to driver data in context struct
This patch adds pointer to driver data to fimd_context structure, to
remove the need to call drm_fimd_get_driver_data() each time access to
driver data is necessary.
Inki Dae [Sun, 12 May 2013 07:09:33 +0000 (16:09 +0900)]
drm/exynos: do not use mode_set_base function directly
This patch adds exynos_drm_crtc_mode_set_commit function
to update mode data and it makes page flip call this function
instead of calling exynos_drm_crtc_mode_set_base function directly.
exynos_drm_crtc_mode_set_base function is called by drm subsystem
as a callback so we don't have to call this function directly.
Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Seung-Woo Kim [Wed, 5 Jun 2013 05:34:38 +0000 (14:34 +0900)]
drm/exynos: remove ignoring return value warning in hdmi
The definition of regulator_bulk_enable is fixed with __must_check
and this causes following build warning.
warning: ignoring return value of 'regulator_bulk_enable',
declared with attribute warn_unused_result
This patch fixes to check return value of the function.
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
drm/exynos: fix tests for valid FIMD window number
Valid values for FIMD windows are from 0 to WINDOWS_NR-1
inclusive (5 windows in total). The WINDOWS_NR is also
a size of fimd_context.win_data array.
However, early-return tests for wrong values of windows
accepted a value of WINDOWS_NR which is out of bound
for fimd_context.win_data.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
Valid values for mixer window are from 0 to MIXER_WIN_NR-1 inclusive.
Arrays in structures (e.g. mixer_context.win_data) have size of
MIXER_WIN_NR so checks for wrong mixer window must be greater-equal.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Hyunhee Kim <hyunhee.kim@samsung.com> Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
This was rearming the workqueue with a 0 timeout, causing
a WARN_ON, and possible loop.
Daniel writes:
"I've looked a bit into this and I think we need to have a separate
work struct for recovering these lost hotplug events since the
continuous self-rearming case is a real risk (e.g. if a connector
flip-flops all the time). At least I don't see a sane way to block out
re-arming with the current code in a simple way. So reverting the
offender seems like the right thing and I'll go back to the drawing
board for 3.12."
YoungJun Cho [Wed, 26 Jun 2013 01:21:42 +0000 (10:21 +0900)]
drm/prime: add return check for dma_buf_fd
The dma_buf_fd() can return error when it fails to prepare fd,
so the dma_buf needs to be put.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Seung-Woo Kim [Wed, 26 Jun 2013 01:21:41 +0000 (10:21 +0900)]
drm/prime: reorder drm_prime_add_buf_handle and remove prototype
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
YoungJun Cho [Wed, 26 Jun 2013 01:21:40 +0000 (10:21 +0900)]
drm/prime: fix to put an exported dma_buf for adding handle failure
When drm_prime_add_buf_handle() returns failure for an exported
dma_buf, the dma_buf was already allocated and its refcount was
increased, so it needs to be put.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Joonyoung Shim [Wed, 19 Jun 2013 06:03:05 +0000 (15:03 +0900)]
drm/prime: support to cache mapping
The drm prime also can support it like GEM CMA supports to cache
mapping. It doesn't allow multiple mappings for one attachment.
[airlied: rebased on top of other prime changes] Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
YoungJun Cho [Mon, 24 Jun 2013 07:40:53 +0000 (16:40 +0900)]
drm/prime: replace NULL with error value in drm_prime_pages_to_sg
Instead of NULL, error value is casted with ERR_PTR() for
drm_prime_pages_to_sg() and IS_ERR_OR_NULL() macro is replaced
with IS_ERR() macro for drm_gem_map_dma_buf().
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
YoungJun Cho [Mon, 24 Jun 2013 06:34:21 +0000 (15:34 +0900)]
drm/prime: fix to check return of dma_map_sg in prime helper
The dma_map_sg(), in map_dma_buf callback operation of prime helper,
can return 0 when it fails to map, so it needs to release related
resources.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: stable@vger.kernel.org Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Dave Airlie <airlied@redhat.com>
YoungJun Cho [Wed, 26 Jun 2013 23:39:58 +0000 (08:39 +0900)]
drm/gem: add mutex lock when using drm_gem_mmap_obj
The drm_gem_mmap_obj() has to be protected with dev->struct_mutex,
but some caller functions do not. So it adds mutex lock to missing
callers and adds assertion to check whether drm_gem_mmap_obj() is
called with mutex lock or not.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
projects / linux-beck.git / log