Michal Malý [Wed, 18 Feb 2015 16:59:20 +0000 (17:59 +0100)]
HID: hid-lg4ff: Identify Logitech gaming wheels in compatibility modes
Identify Logitech gaming wheels in compatibility modes accordingly to Logitech
specifications.
Logitech specification contains a general method of identifying various
models of their gaming wheels while they are in "compatibility" mode.
This patch implements the method instead of checking against known
values of bcdDevice. Handling of the mode switch upon initialization is
also adjusted so that the driver does not have to go through the entire
initialization routine because the wheels are set to perform a USB
detach before they reappear in "native" mode.
Signed-off-by: Michal Malý <madcatxster@devoid-pointer.net> Tested-by: Simon Wood <simon@mungewell.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Linus Torvalds [Wed, 11 Feb 2015 02:29:38 +0000 (18:29 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Pull HID updates from Jiri Kosina:
"Updates for HID code
- improveements of Logitech HID++ procotol implementation, from
Benjamin Tissoires
- support for composite RMI devices, from Andrew Duggan
- new driver for BETOP controller, from Huang Bo
- fixup for conflicting mapping in HID core between PC-101/103/104
and PC-102/105 keyboards from David Herrmann
- new hardware support and fixes in Wacom driver, from Ping Cheng
- assorted small fixes and device ID additions all over the place"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (33 commits)
HID: wacom: add support for Cintiq 27QHD and 27QHD touch
HID: wacom: consolidate input capability settings for pen and touch
HID: wacom: make sure touch arbitration is applied consistently
HID: pidff: Fix initialisation forMicrosoft Sidewinder FF Pro 2
HID: hyperv: match wait_for_completion_timeout return type
HID: wacom: Report ABS_MISC event for Cintiq Companion Hybrid
HID: Use Kbuild idiom in Makefiles
HID: do not bind to Microchip Pick16F1454
HID: hid-lg4ff: use DEVICE_ATTR_RW macro
HID: hid-lg4ff: fix sysfs attribute permission
HID: wacom: peport In Range event according to the spec
HID: wacom: process invalid Cintiq and Intuos data in wacom_intuos_inout()
HID: rmi: Add support for the touchpad in the Razer Blade 14 laptop
HID: rmi: Support touchpads with external buttons
HID: rmi: Use hid_report_len to compute the size of reports
HID: logitech-hidpp: store the name of the device in struct hidpp
HID: microsoft: add support for Japanese Surface Type Cover 3
HID: fixup the conflicting keyboard mappings quirk
HID: apple: fix battery support for the 2009 ANSI wireless keyboard
HID: fix Kconfig text
...
Linus Torvalds [Wed, 11 Feb 2015 02:24:57 +0000 (18:24 -0800)]
sata_dwc_460ex: disable COMPILE_TEST again
Commit 84683a7e081f ("sata_dwc_460ex: enable COMPILE_TEST for the
driver") enabled this driver for non-ppc460-ex platforms, but it was
then disabled for ARM and ARM64 by commit 2de5a9c004e9 ("sata_dwc_460ex:
disable compilation on ARM and ARM64") because it's too noisy and
broken.
This disabled is entirely, because it's too noisy on x86-64 too, and
there's no point in disabling architectures one by one. At a minimum,
the code isn't 64-bit clean, and even on 32-bit it is questionable
whether it makes sense.
Linus Torvalds [Wed, 11 Feb 2015 00:45:56 +0000 (16:45 -0800)]
Merge branch 'akpm' (patches from Andrew)
Merge misc updates from Andrew Morton:
"Bite-sized chunks this time, to avoid the MTA ratelimiting woes.
- fs/notify updates
- ocfs2
- some of MM"
That laconic "some MM" is mainly the removal of remap_file_pages(),
which is a big simplification of the VM, and which gets rid of a *lot*
of random cruft and special cases because we no longer support the
non-linear mappings that it used.
From a user interface perspective, nothing has changed, because the
remap_file_pages() syscall still exists, it's just done by emulating the
old behavior by creating a lot of individual small mappings instead of
one non-linear one.
The emulation is slower than the old "native" non-linear mappings, but
nobody really uses or cares about remap_file_pages(), and simplifying
the VM is a big advantage.
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (78 commits)
memcg: zap memcg_slab_caches and memcg_slab_mutex
memcg: zap memcg_name argument of memcg_create_kmem_cache
memcg: zap __memcg_{charge,uncharge}_slab
mm/page_alloc.c: place zone_id check before VM_BUG_ON_PAGE check
mm: hugetlb: fix type of hugetlb_treat_as_movable variable
mm, hugetlb: remove unnecessary lower bound on sysctl handlers"?
mm: memory: merge shared-writable dirtying branches in do_wp_page()
mm: memory: remove ->vm_file check on shared writable vmas
xtensa: drop _PAGE_FILE and pte_file()-related helpers
x86: drop _PAGE_FILE and pte_file()-related helpers
unicore32: drop pte_file()-related helpers
um: drop _PAGE_FILE and pte_file()-related helpers
tile: drop pte_file()-related helpers
sparc: drop pte_file()-related helpers
sh: drop _PAGE_FILE and pte_file()-related helpers
score: drop _PAGE_FILE and pte_file()-related helpers
s390: drop pte_file()-related helpers
parisc: drop _PAGE_FILE and pte_file()-related helpers
openrisc: drop _PAGE_FILE and pte_file()-related helpers
nios2: drop _PAGE_FILE and pte_file()-related helpers
...
Linus Torvalds [Wed, 11 Feb 2015 00:20:49 +0000 (16:20 -0800)]
Merge tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw
Pull gfs2 updates from Steven Whitehouse:
"This time we have mostly clean ups. There is a bug fix for a NULL
dereference relating to ACLs, and another which improves (but does not
fix entirely) an allocation fall-back code path. The other three
patches are small clean ups"
* tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw:
GFS2: Fix crash during ACL deletion in acl max entry check in gfs2_set_acl()
GFS2: use __vmalloc GFP_NOFS for fs-related allocations.
GFS2: Eliminate a nonsense goto
GFS2: fix sprintf format specifier
GFS2: Eliminate __gfs2_glock_remove_from_lru
Linus Torvalds [Wed, 11 Feb 2015 00:15:17 +0000 (16:15 -0800)]
Merge tag 'xfs-for-linus-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs
Pull xfs update from Dave Chinner:
"This update contains:
- RENAME_EXCHANGE support
- Rework of the superblock logging infrastructure
- Rework of the XFS_IOCTL_SETXATTR implementation
* enables use inside user namespaces
* fixes inconsistencies setting extent size hints
- fixes for missing buffer type annotations used in log recovery
- more consolidation of libxfs headers
- preparation patches for block based PNFS support
- miscellaneous bug fixes and cleanups"
* tag 'xfs-for-linus-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: (37 commits)
xfs: only trace buffer items if they exist
xfs: report proper f_files in statfs if we overshoot imaxpct
xfs: fix panic_mask documentation
xfs: xfs_ioctl_setattr_check_projid can be static
xfs: growfs should use synchronous transactions
xfs: fix behaviour of XFS_IOC_FSSETXATTR on directories
xfs: factor projid hint checking out of xfs_ioctl_setattr
xfs: factor extsize hint checking out of xfs_ioctl_setattr
xfs: XFS_IOCTL_SETXATTR can run in user namespaces
xfs: kill xfs_ioctl_setattr behaviour mask
xfs: disaggregate xfs_ioctl_setattr
xfs: factor out xfs_ioctl_setattr transaciton preamble
xfs: separate xflags from xfs_ioctl_setattr
xfs: FSX_NONBLOCK is not used
xfs: don't allocate an ioend for direct I/O completions
xfs: change kmem_free to use generic kvfree()
xfs: factor out a xfs_update_prealloc_flags() helper
xfs: remove incorrect error negation in attr_multi ioctl
xfs: set superblock buffer type correctly
xfs: set buf types when converting extent formats
...
Linus Torvalds [Tue, 10 Feb 2015 23:52:38 +0000 (15:52 -0800)]
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull quota interface unification and misc cleanups from Jan Kara:
"The first part of the series unifying XFS and VFS quota interfaces.
This part unifies turning quotas on and off so quota-tools and
xfs_quota can be used to manage any filesystem. This is useful so
that userspace doesn't have to distinguish which filesystem it is
working with. As a result we can then easily reuse tests for project
quotas in XFS for ext4.
This also contains minor cleanups and fixes for udf, isofs, and ext3"
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: (23 commits)
udf: remove bool assignment to 0/1
udf: use bool for done
quota: Store maximum space limit in bytes
quota: Remove quota_on_meta callback
ocfs2: Use generic helpers for quotaon and quotaoff
ext4: Use generic helpers for quotaon and quotaoff
quota: Add ->quota_{enable,disable} callbacks for VFS quotas
quota: Wire up ->quota_{enable,disable} callbacks into Q_QUOTA{ON,OFF}
quota: Split ->set_xstate callback into two
xfs: Remove some pointless quota checks
xfs: Remove some useless flags tests
xfs: Remove useless test
quota: Verify flags passed to Q_SETINFO
quota: Cleanup flags definitions
ocfs2: Move OLQF_CLEAN flag out of generic quota flags
quota: Don't store flags for v2 quota format
jbd: drop jbd_ENOSYS debug
udf: destroy sbi mutex in put_super
udf: Check length of extended attributes and allocation descriptors
udf: Remove repeated loads blocksize
...
Linus Torvalds [Tue, 10 Feb 2015 23:34:42 +0000 (15:34 -0800)]
Merge tag 'locks-v3.20-1' of git://git.samba.org/jlayton/linux
Pull file locking related changes #1 from Jeff Layton:
"This patchset contains a fairly major overhaul of how file locks are
tracked within the inode. Rather than a single list, we now create a
per-inode "lock context" that contains individual lists for the file
locks, and a new dedicated spinlock for them.
There are changes in other trees that are based on top of this set so
it may be easiest to pull this in early"
* tag 'locks-v3.20-1' of git://git.samba.org/jlayton/linux:
locks: update comments that refer to inode->i_flock
locks: consolidate NULL i_flctx checks in locks_remove_file
locks: keep a count of locks on the flctx lists
locks: clean up the lm_change prototype
locks: add a dedicated spinlock to protect i_flctx lists
locks: remove i_flock field from struct inode
locks: convert lease handling to file_lock_context
locks: convert posix locks to file_lock_context
locks: move flock locks to file_lock_context
ceph: move spinlocking into ceph_encode_locks_to_buffer and ceph_count_locks
locks: add a new struct file_locking_context pointer to struct inode
locks: have locks_release_file use flock_lock_file to release generic flock locks
locks: add new struct list_head to struct file_lock
Linus Torvalds [Tue, 10 Feb 2015 23:09:41 +0000 (15:09 -0800)]
Merge tag 'pm+acpi-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and power management updates from Rafael Wysocki:
"We have a few new features this time, including a new SFI-based
cpufreq driver, a new devfreq driver for Tegra Activity Monitor, a new
devfreq class for providing its governors with raw utilization data
and a new ACPI driver for AMD SoCs.
Still, the majority of changes here are reworks of existing code to
make it more straightforward or to prepare it for implementing new
features on top of it. The primary example is the rework of ACPI
resources handling from Jiang Liu, Thomas Gleixner and Lv Zheng with
support for IOAPIC hotplug implemented on top of it, but there is
quite a number of changes of this kind in the cpufreq core, ACPICA,
ACPI EC driver, ACPI processor driver and the generic power domains
core code too.
The most active developer is Viresh Kumar with his cpufreq changes.
Specifics:
- Rework of the core ACPI resources parsing code to fix issues in it
and make using resource offsets more convenient and consolidation
of some resource-handing code in a couple of places that have grown
analagous data structures and code to cover the the same gap in the
core (Jiang Liu, Thomas Gleixner, Lv Zheng).
- ACPI-based IOAPIC hotplug support on top of the resources handling
rework (Jiang Liu, Yinghai Lu).
- ACPICA update to upstream release 20150204 including an interrupt
handling rework that allows drivers to install raw handlers for
ACPI GPEs which then become entirely responsible for the given GPE
and the ACPICA core code won't touch it (Lv Zheng, David E Box,
Octavian Purdila).
- ACPI EC driver rework to fix several concurrency issues and other
problems related to events handling on top of the ACPICA's new
support for raw GPE handlers (Lv Zheng).
- New ACPI driver for AMD SoCs analogous to the LPSS (Low-Power
Subsystem) driver for Intel chips (Ken Xue).
- Two minor fixes of the ACPI LPSS driver (Heikki Krogerus, Jarkko
Nikula).
- Two new blacklist entries for machines (Samsung 730U3E/740U3E and
510R) where the native backlight interface doesn't work correctly
while the ACPI one does (Hans de Goede).
- Rework of the ACPI processor driver's handling of idle states to
make the code more straightforward and less bloated overall (Rafael
J Wysocki).
- Assorted minor fixes related to ACPI and SFI (Andreas Ruprecht,
Andy Shevchenko, Hanjun Guo, Jan Beulich, Rafael J Wysocki, Yaowei
Bai).
- PCI core power management modification to avoid resuming (some)
runtime-suspended devices during system suspend if they are in the
right states already (Rafael J Wysocki).
- New SFI-based cpufreq driver for Intel platforms using SFI
(Srinidhi Kasagar).
- New dabugfs interface to make the list of PM QoS constraints
available to user space (Nishanth Menon).
- New devfreq driver for Tegra Activity Monitor (Tomeu Vizoso).
- New devfreq class (devfreq_event) to provide raw utilization data
to devfreq governors (Chanwoo Choi).
- Assorted minor fixes and cleanups related to power management
(Andreas Ruprecht, Krzysztof Kozlowski, Rickard Strandqvist, Pavel
Machek, Todd E Brandt, Wonhong Kwon).
* tag 'pm+acpi-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (151 commits)
tools/power turbostat: relax dependency on APERF_MSR
tools/power turbostat: relax dependency on invariant TSC
Merge branch 'pci/host-generic' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci into acpi-resources
tools/power turbostat: decode MSR_*_PERF_LIMIT_REASONS
tools/power turbostat: relax dependency on root permission
ACPI / video: Add disable_native_backlight quirk for Samsung 510R
ACPI / PM: Remove unneeded nested #ifdef
USB / PM: Remove unneeded #ifdef and associated dead code
intel_pstate: provide option to only use intel_pstate with HWP
ACPI / EC: Add GPE reference counting debugging messages
ACPI / EC: Add query flushing support
ACPI / EC: Refine command storm prevention support
ACPI / EC: Add command flushing support.
ACPI / EC: Introduce STARTED/STOPPED flags to replace BLOCKED flag
ACPI: add AMD ACPI2Platform device support for x86 system
ACPI / table: remove duplicate NULL check for the handler of acpi_table_parse()
ACPI / EC: Update revision due to raw handler mode.
ACPI / EC: Reduce ec_poll() by referencing the last register access timestamp.
ACPI / EC: Fix several GPE handling issues by deploying ACPI_GPE_DISPATCH_RAW_HANDLER mode.
ACPICA: Events: Enable APIs to allow interrupt/polling adaptive request based GPE handling model
...
Linus Torvalds [Tue, 10 Feb 2015 22:31:28 +0000 (14:31 -0800)]
Merge tag 'pci-v3.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI changes from Bjorn Helgaas:
"Enumeration
- Move domain assignment from arm64 to generic code (Lorenzo Pieralisi)
- ARM: Remove artificial dependency on pci_sys_data domain (Lorenzo Pieralisi)
- ARM: Move to generic PCI domains (Lorenzo Pieralisi)
- Generate uppercase hex for modalias var in uevent (Ricardo Ribalda Delgado)
- Add and use generic config accessors on ARM, PowerPC (Rob Herring)
Resource management
- Free resources on failure in of_pci_get_host_bridge_resources() (Lorenzo Pieralisi)
- Fix infinite loop with ROM image of size 0 (Michel Dänzer)
PCI device hotplug
- Handle surprise add even if surprise removal isn't supported (Bjorn Helgaas)
Virtualization
- Mark AMD/ATI VGA devices that don't reset on D3hot->D0 transition (Alex Williamson)
- Add DMA alias quirk for Adaptec 3405 (Alex Williamson)
- Add Wellsburg (X99) to Intel PCH root port ACS quirk (Alex Williamson)
- Add ACS quirk for Emulex NICs (Vasundhara Volam)
MSI
- Fail MSI-X mappings if there's no space assigned to MSI-X BAR (Yijing Wang)
TI Keystone host bridge driver
- Fix error handling of irq_of_parse_and_map() (Dmitry Torokhov)
- Fix misspelling of current function in debug output (Julia Lawall)
Miscellaneous
- Use standard parsing functions for ASPM sysfs setters (Chris J Arges)
- Add pci_device_to_OF_node() stub for !CONFIG_OF (Kevin Hao)
- Delete unnecessary NULL pointer checks (Markus Elfring)
- Add and use defines for PCIe Max_Read_Request_Size (Rafał Miłecki)
- Include clk.h instead of clk-private.h (Stephen Boyd)"
* tag 'pci-v3.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (48 commits)
PCI: Add pci_device_to_OF_node() stub for !CONFIG_OF
PCI: xilinx: Convert to use generic config accessors
PCI: xgene: Convert to use generic config accessors
PCI: tegra: Convert to use generic config accessors
PCI: rcar: Convert to use generic config accessors
PCI: generic: Convert to use generic config accessors
powerpc/powermac: Convert PCI to use generic config accessors
powerpc/fsl_pci: Convert PCI to use generic config accessors
ARM: ks8695: Convert PCI to use generic config accessors
ARM: sa1100: Convert PCI to use generic config accessors
ARM: integrator: Convert PCI to use generic config accessors
PCI: versatile: Add DT-based ARM Versatile PB PCIe host driver
ARM: dts: versatile: add PCI controller binding
of/pci: Free resources on failure in of_pci_get_host_bridge_resources()
PCI: versatile: Add DT docs for ARM Versatile PB PCIe driver
PCI: Fail MSI-X mappings if there's no space assigned to MSI-X BAR
r8169: use PCI define for Max_Read_Request_Size
[SCSI] esas2r: use PCI define for Max_Read_Request_Size
tile: use PCI define for Max_Read_Request_Size
rapidio/tsi721: use PCI define for Max_Read_Request_Size
...
Vladimir Davydov [Tue, 10 Feb 2015 22:11:47 +0000 (14:11 -0800)]
memcg: zap memcg_slab_caches and memcg_slab_mutex
mem_cgroup->memcg_slab_caches is a list of kmem caches corresponding to
the given cgroup. Currently, it is only used on css free in order to
destroy all caches corresponding to the memory cgroup being freed. The
list is protected by memcg_slab_mutex. The mutex is also used to protect
kmem_cache->memcg_params->memcg_caches arrays and synchronizes
kmem_cache_destroy vs memcg_unregister_all_caches.
However, we can perfectly get on without these two. To destroy all caches
corresponding to a memory cgroup, we can walk over the global list of kmem
caches, slab_caches, and we can do all the synchronization stuff using the
slab_mutex instead of the memcg_slab_mutex. This patch therefore gets rid
of the memcg_slab_caches and memcg_slab_mutex.
Apart from this nice cleanup, it also:
- assures that rcu_barrier() is called once at max when a root cache is
destroyed or a memory cgroup is freed, no matter how many caches have
SLAB_DESTROY_BY_RCU flag set;
- fixes the race between kmem_cache_destroy and kmem_cache_create that
exists, because memcg_cleanup_cache_params, which is called from
kmem_cache_destroy after checking that kmem_cache->refcount=0,
releases the slab_mutex, which gives kmem_cache_create a chance to
make an alias to a cache doomed to be destroyed.
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Acked-by: Christoph Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vladimir Davydov [Tue, 10 Feb 2015 22:11:44 +0000 (14:11 -0800)]
memcg: zap memcg_name argument of memcg_create_kmem_cache
Instead of passing the name of the memory cgroup which the cache is
created for in the memcg_name_argument, let's obtain it immediately in
memcg_create_kmem_cache.
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vladimir Davydov [Tue, 10 Feb 2015 22:11:41 +0000 (14:11 -0800)]
memcg: zap __memcg_{charge,uncharge}_slab
They are simple wrappers around memcg_{charge,uncharge}_kmem, so let's
zap them and call these functions directly.
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Weijie Yang [Tue, 10 Feb 2015 22:11:39 +0000 (14:11 -0800)]
mm/page_alloc.c: place zone_id check before VM_BUG_ON_PAGE check
If the freeing page and its buddy page are not at the same zone, the
current holding zone->lock for the freeing page cann't prevent buddy page
getting allocated, this could trigger VM_BUG_ON_PAGE in page_is_buddy() at
a very tiny chance, such as:
cpu 0: cpu 1:
hold zone_1 lock
check page and it buddy
PageBuddy(buddy) is true hold zone_2 lock
page_order(buddy) == order is true alloc buddy
trigger VM_BUG_ON_PAGE(page_count(buddy) != 0)
zone_1->lock prevents the freeing page getting allocated
zone_2->lock prevents the buddy page getting allocated
they are not the same zone->lock.
If we can't remove the zone_id check statement, it's better handle this
rare race. This patch fixes this by placing the zone_id check before the
VM_BUG_ON_PAGE check.
Signed-off-by: Weijie Yang <weijie.yang@samsung.com> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrey Ryabinin [Tue, 10 Feb 2015 22:11:33 +0000 (14:11 -0800)]
mm, hugetlb: remove unnecessary lower bound on sysctl handlers"?
Commit ed4d4902ebdd ("mm, hugetlb: remove hugetlb_zero and
hugetlb_infinity") replaced 'unsigned long hugetlb_zero' with 'int zero'
leading to out-of-bounds access in proc_doulongvec_minmax(). Use
'.extra1 = NULL' instead of '.extra1 = &zero'. Passing NULL is
equivalent to passing minimal value, which is 0 for unsigned types.
Johannes Weiner [Tue, 10 Feb 2015 22:11:30 +0000 (14:11 -0800)]
mm: memory: merge shared-writable dirtying branches in do_wp_page()
Whether there is a vm_ops->page_mkwrite or not, the page dirtying is
pretty much the same. Make sure the page references are the same in both
cases, then merge the two branches.
It's tempting to go even further and page-lock the !page_mkwrite case, to
get it in line with everybody else setting the page table and thus further
simplify the model. But that's not quite compelling enough to justify
dropping the pte lock, then relocking and verifying the entry for
filesystems without ->page_mkwrite, which notably includes tmpfs. Leave
it for now and lock the page late in the !page_mkwrite case.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Johannes Weiner [Tue, 10 Feb 2015 22:11:28 +0000 (14:11 -0800)]
mm: memory: remove ->vm_file check on shared writable vmas
Shared anonymous mmaps are implemented with shmem files, so all VMAs with
shared writable semantics also have an underlying backing file.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Jan Kara <jack@suse.cz> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch also increase number of bits availble for swap offset.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch also increase number of bits availble for swap offset.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Richard Kuo <rkuo@codeaurora.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch also adjust __SWP_TYPE_SHIFT, effectively increase size of
possible swap file to 128G.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mm: drop support of non-linear mapping from unmap/zap codepath
We have remap_file_pages(2) emulation in -mm tree for few release cycles
and we plan to have it mainline in v3.20. This patchset removes rest of
VM_NONLINEAR infrastructure.
Patches 1-8 take care about generic code. They are pretty
straight-forward and can be applied without other of patches.
Rest patches removes pte_file()-related stuff from architecture-specific
code. It usually frees up one bit in non-present pte. I've tried to reuse
that bit for swap offset, where I was able to figure out how to do that.
For obvious reason I cannot test all that arch-specific code and would
like to see acks from maintainers.
In total, remap_file_pages(2) required about 1.4K lines of not-so-trivial
kernel code. That's too much for functionality nobody uses.
Tested-by: Felipe Balbi <balbi@ti.com>
This patch (of 38):
We don't create non-linear mappings anymore. Let's drop code which
handles them on unmap/zap.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mm: replace remap_file_pages() syscall with emulation
remap_file_pages(2) was invented to be able efficiently map parts of
huge file into limited 32-bit virtual address space such as in database
workloads.
Nonlinear mappings are pain to support and it seems there's no
legitimate use-cases nowadays since 64-bit systems are widely available.
Let's drop it and get rid of all these special-cased code.
The patch replaces the syscall with emulation which creates new VMA on
each remap_file_pages(), unless they it can be merged with an adjacent
one.
I didn't find *any* real code that uses remap_file_pages(2) to test
emulation impact on. I've checked Debian code search and source of all
packages in ALT Linux. No real users: libc wrappers, mentions in
strace, gdb, valgrind and this kind of stuff.
There are few basic tests in LTP for the syscall. They work just fine
with emulation.
To test performance impact, I've written small test case which
demonstrate pretty much worst case scenario: map 4G shmfs file, write to
begin of every page pgoff of the page, remap pages in reverse order,
read every page.
The test creates 1 million of VMAs if emulation is in use, so I had to
set vm.max_map_count to 1100000 to avoid -ENOMEM.
Andrew Morton [Tue, 10 Feb 2015 22:09:43 +0000 (14:09 -0800)]
mm/vmstat.c: fix/cleanup ifdefs
CONFIG_COMPACTION=y, CONFIG_DEBUG_FS=n:
mm/vmstat.c:690: warning: 'frag_start' defined but not used
mm/vmstat.c:702: warning: 'frag_next' defined but not used
mm/vmstat.c:710: warning: 'frag_stop' defined but not used
mm/vmstat.c:715: warning: 'walk_zones_in_node' defined but not used
It's all a bit of a tangly mess and it's unclear why CONFIG_COMPACTION
figures in there at all. Move frag_start/frag_next/frag_stop and
migratetype_names[] into the existing CONFIG_PROC_FS block.
walk_zones_in_node() gets a special ifdef.
Also move the #include lines up to where #include lines live.
[axel.lin@ingics.com: fix build error when !CONFIG_PROC_FS] Signed-off-by: Axel Lin <axel.lin@ingics.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Tested-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kim Phillips [Tue, 10 Feb 2015 22:09:37 +0000 (14:09 -0800)]
mm/slub.c: fix typo in comment
Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Acked-by: Christoph Lameter <cl@linux.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joonsoo Kim [Tue, 10 Feb 2015 22:09:35 +0000 (14:09 -0800)]
mm: don't use compound_head() in virt_to_head_page()
compound_head() is implemented with assumption that there would be race
condition when checking tail flag. This assumption is only true when we
try to access arbitrary positioned struct page.
The situation that virt_to_head_page() is called is different case. We
call virt_to_head_page() only in the range of allocated pages, so there
is no race condition on tail flag. In this case, we don't need to
handle race condition and we can reduce overhead slightly. This patch
implements compound_head_fast() which is similar with compound_head()
except tail flag race handling. And then, virt_to_head_page() uses this
optimized function to improve performance.
I saw 1.8% win in a fast-path loop over kmem_cache_alloc/free, (14.063
ns -> 13.810 ns) if target object is on tail page.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joonsoo Kim [Tue, 10 Feb 2015 22:09:32 +0000 (14:09 -0800)]
mm/slub: optimize alloc/free fastpath by removing preemption on/off
We had to insert a preempt enable/disable in the fastpath a while ago in
order to guarantee that tid and kmem_cache_cpu are retrieved on the same
cpu. It is the problem only for CONFIG_PREEMPT in which scheduler can
move the process to other cpu during retrieving data.
Now, I reach the solution to remove preempt enable/disable in the
fastpath. If tid is matched with kmem_cache_cpu's tid after tid and
kmem_cache_cpu are retrieved by separate this_cpu operation, it means
that they are retrieved on the same cpu. If not matched, we just have
to retry it.
With this guarantee, preemption enable/disable isn't need at all even if
CONFIG_PREEMPT, so this patch removes it.
I saw roughly 5% win in a fast-path loop over kmem_cache_alloc/free in
CONFIG_PREEMPT. (14.821 ns -> 14.049 ns)
Below is the result of Christoph's slab_test reported by Jesper Dangaard
Brouer.
* Before
Single thread testing
=====================
1. Kmalloc: Repeatedly allocate then free test
10000 times kmalloc(8) -> 49 cycles kfree -> 62 cycles
10000 times kmalloc(16) -> 48 cycles kfree -> 64 cycles
10000 times kmalloc(32) -> 53 cycles kfree -> 70 cycles
10000 times kmalloc(64) -> 64 cycles kfree -> 77 cycles
10000 times kmalloc(128) -> 74 cycles kfree -> 84 cycles
10000 times kmalloc(256) -> 84 cycles kfree -> 114 cycles
10000 times kmalloc(512) -> 83 cycles kfree -> 116 cycles
10000 times kmalloc(1024) -> 81 cycles kfree -> 120 cycles
10000 times kmalloc(2048) -> 104 cycles kfree -> 136 cycles
10000 times kmalloc(4096) -> 142 cycles kfree -> 165 cycles
10000 times kmalloc(8192) -> 238 cycles kfree -> 226 cycles
10000 times kmalloc(16384) -> 403 cycles kfree -> 264 cycles
2. Kmalloc: alloc/free test
10000 times kmalloc(8)/kfree -> 68 cycles
10000 times kmalloc(16)/kfree -> 68 cycles
10000 times kmalloc(32)/kfree -> 69 cycles
10000 times kmalloc(64)/kfree -> 68 cycles
10000 times kmalloc(128)/kfree -> 68 cycles
10000 times kmalloc(256)/kfree -> 68 cycles
10000 times kmalloc(512)/kfree -> 74 cycles
10000 times kmalloc(1024)/kfree -> 75 cycles
10000 times kmalloc(2048)/kfree -> 74 cycles
10000 times kmalloc(4096)/kfree -> 74 cycles
10000 times kmalloc(8192)/kfree -> 75 cycles
10000 times kmalloc(16384)/kfree -> 510 cycles
* After
Single thread testing
=====================
1. Kmalloc: Repeatedly allocate then free test
10000 times kmalloc(8) -> 46 cycles kfree -> 61 cycles
10000 times kmalloc(16) -> 46 cycles kfree -> 63 cycles
10000 times kmalloc(32) -> 49 cycles kfree -> 69 cycles
10000 times kmalloc(64) -> 57 cycles kfree -> 76 cycles
10000 times kmalloc(128) -> 66 cycles kfree -> 83 cycles
10000 times kmalloc(256) -> 84 cycles kfree -> 110 cycles
10000 times kmalloc(512) -> 77 cycles kfree -> 114 cycles
10000 times kmalloc(1024) -> 80 cycles kfree -> 116 cycles
10000 times kmalloc(2048) -> 102 cycles kfree -> 131 cycles
10000 times kmalloc(4096) -> 135 cycles kfree -> 163 cycles
10000 times kmalloc(8192) -> 238 cycles kfree -> 218 cycles
10000 times kmalloc(16384) -> 399 cycles kfree -> 262 cycles
2. Kmalloc: alloc/free test
10000 times kmalloc(8)/kfree -> 65 cycles
10000 times kmalloc(16)/kfree -> 66 cycles
10000 times kmalloc(32)/kfree -> 65 cycles
10000 times kmalloc(64)/kfree -> 66 cycles
10000 times kmalloc(128)/kfree -> 66 cycles
10000 times kmalloc(256)/kfree -> 71 cycles
10000 times kmalloc(512)/kfree -> 72 cycles
10000 times kmalloc(1024)/kfree -> 71 cycles
10000 times kmalloc(2048)/kfree -> 71 cycles
10000 times kmalloc(4096)/kfree -> 71 cycles
10000 times kmalloc(8192)/kfree -> 65 cycles
10000 times kmalloc(16384)/kfree -> 511 cycles
Most of the results are better than before.
Note that this change slightly worses performance in !CONFIG_PREEMPT,
roughly 0.3%. Implementing each case separately would help performance,
but, since it's so marginal, I didn't do that. This would help
maintanance since we have same code for all cases.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Christoph Lameter <cl@linux.com> Tested-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Srinivas Eeda [Tue, 10 Feb 2015 22:09:26 +0000 (14:09 -0800)]
o2dlm: fix NULL pointer dereference in o2dlm_blocking_ast_wrapper
A tiny race between BAST and unlock message causes the NULL dereference.
A node sends an unlock request to master and receives a response. Before
processing the response it receives a BAST from the master. Since both
requests are processed by different threads it creates a race. While the
BAST is being processed, lock can get freed by unlock code.
This patch makes bast to return immediately if lock is found but unlock is
pending. The code should handle this race. We also have to fix master
node to skip sending BAST after receiving unlock message.
alex chen [Tue, 10 Feb 2015 22:09:23 +0000 (14:09 -0800)]
ocfs2: prune the dcache before deleting the dentry of directory
In ocfs2_dentry_convert_worker, we should prune the dcache before deleting
the dentry of directory, otherwise, in the following cases the inode of
directory will still remain in orphan directory until the device being
umounted.
Mount point: /mnt/ocfs2
Node A Node B
mkdir /mnt/ocfs2/testdir
ocfs2_mkdir
->ocfs2_mknod
->ocfs2_dentry_attach_lock
->ocfs2_dentry_lock(dentry, 0)
... ...
touch /mnt/ocfs2/testdir/testfile
unlink /mnt/test/testdir/testfile
rmdir /mnt/ocfs2/testdir
ocfs2_unlink
->ocfs2_remote_dentry_delete
->ocfs2_dentry_lock(dentry, 1)
... ...
... ...
ocfs2_downconvert_thread
->ocfs2_unblock_lock
->ocfs2_dentry_convert_worker
->ocfs2_find_local_alias
->dget_dlock
->d_delete
Here the dentry can not be
released because the children's
dentry is negative but still exist.
Finally, this inode will still remain
in orphan directory until its children
are destroyed.
So before deleting dentry of directory, we should prune the dcache to
remove unused children of the parent dentry by shrink_dcache_parent().
Signed-off-by: Alex Chen <alex.chen@huawei.com> Reviewed-by: Joseph Qi <joseph.qi@huawei.com> Reviewed-by: joyce.xue <xuejiufei@huawei.com> Reviewed-by: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fabian Frederick [Tue, 10 Feb 2015 22:09:20 +0000 (14:09 -0800)]
ocfs2: make resv_lock spinlock static
resv_lock is only used in reservations.c
Signed-off-by: Fabian Frederick <fabf@skynet.be> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Smatch complains that, if o2net_tx_can_proceed() returns false, then "sc"
and "ret" are uninialized or maybe we are re-using the data from previous
iteration. I do not know if we can hit this bug in real life but checking
the return value is harmless and we may as well silence the static checker
warning.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jan Kara <jack@suse.cz> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
alex chen [Tue, 10 Feb 2015 22:09:04 +0000 (14:09 -0800)]
ocfs2: add a mount option journal_async_commit on ocfs2 filesystem
Add a mount option to support JBD2 feature:
JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT. When this feature is opened, journal
commit block can be written to disk without waiting for descriptor blocks,
which can improve journal commit performance. This option will enable
'journal_checksum' internally.
Using the fs_mark benchmark, using journal_async_commit shows a 50%
improvement, the files per second go up from 215.2 to 317.5.
test script:
fs_mark -d /mnt/ocfs2/ -s 10240 -n 1000
Signed-off-by: Alex Chen <alex.chen@huawei.com> Signed-off-by: Weiwei Wang <wangww631@huawei.comm> Reviewed-by: Joseph Qi <joseph.qi@huawei.com> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
alex chen [Tue, 10 Feb 2015 22:09:02 +0000 (14:09 -0800)]
ocfs2: fix journal commit deadlock in ocfs2_convert_inline_data_to_extents
Similar to ocfs2_write_end_nolock() which is metioned at commit 136f49b91710 ("ocfs2: fix journal commit deadlock"), we should unlock
pages before ocfs2_commit_trans() in ocfs2_convert_inline_data_to_extents.
Otherwise, it will cause a deadlock with journal commit threads.
Signed-off-by: Alex Chen <alex.chen@huawei.com> Reviewed-by: Joseph Qi <joseph.qi@huawei.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
alex chen [Tue, 10 Feb 2015 22:08:51 +0000 (14:08 -0800)]
ocfs2: fix snprintf format specifier in dlmdebug.c
Use snprintf format specifier "%lu" instead of "%ld" for argument of type
'unsigned long'.
Signed-off-by: Alex Chen <alex.chen@huawei.com> Reviewed-by: Joseph Qi <joseph.qi@huawei.com> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Junxiao Bi [Tue, 10 Feb 2015 22:08:48 +0000 (14:08 -0800)]
ocfs2: fix wrong comment
O2NET_CONN_IDLE_DELAY is not defined, connection attempts will not be
canceled due to timeout.
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Junxiao Bi [Tue, 10 Feb 2015 22:08:46 +0000 (14:08 -0800)]
ocfs2: fix uninitialized variable access
Variable "why" is not yet initialized at line 615, fix it.
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fabian Frederick [Tue, 10 Feb 2015 22:08:43 +0000 (14:08 -0800)]
ocfs2: remove unnecessary else in ocfs2_set_acl()
else is unnecessary after return.
Signed-off-by: Fabian Frederick <fabf@skynet.be> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Xue jiufei [Tue, 10 Feb 2015 22:08:40 +0000 (14:08 -0800)]
ocfs2/dlm: add missing dlm_lock_put() when recovery master down
When the recovery master is down, the owner of $RECOVERY calls
dlm_do_local_recovery_cleanup() to prune any $RECOVERY entries for dead
nodes. The lock is in the granted list and the refcount must be 2. We
should put twice to remove this lock. Otherwise, it will lead to a memory
leak.
Signed-off-by: joyce.xue <xuejiufei@huawei.com> Reported-by: yangwenfang <vicky.yangwenfang@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jan Kara [Tue, 10 Feb 2015 22:08:32 +0000 (14:08 -0800)]
fsnotify: fix handling of renames in audit
Commit e9fd702a58c4 ("audit: convert audit watches to use fsnotify
instead of inotify") broke handling of renames in audit. Audit code
wants to update inode number of an inode corresponding to watched name
in a directory. When something gets renamed into a directory to a
watched name, inotify previously passed moved inode to audit code
however new fsnotify code passes directory inode where the change
happened. That confuses audit and it starts watching parent directory
instead of a file in a directory.
This can be observed for example by doing:
cd /tmp
touch foo bar
auditctl -w /tmp/foo
touch foo
mv bar foo
touch foo
and that's it - we see event for the first touch after creating the
audit rule, we see events for rename but we don't see any event for the
last touch. However we start seeing events for unrelated stuff
happening in /tmp.
Fix the problem by passing moved inode as data in the FS_MOVED_FROM and
FS_MOVED_TO events instead of the directory where the change happens.
This doesn't introduce any new problems because noone besides
audit_watch.c cares about the passed value:
fs/notify/fanotify/fanotify.c cares only about FSNOTIFY_EVENT_PATH events.
fs/notify/dnotify/dnotify.c doesn't care about passed 'data' value at all.
fs/notify/inotify/inotify_fsnotify.c uses 'data' only for FSNOTIFY_EVENT_PATH.
kernel/audit_tree.c doesn't care about passed 'data' at all.
kernel/audit_watch.c expects moved inode as 'data'.
Fixes: e9fd702a58c49db ("audit: convert audit watches to use fsnotify instead of inotify") Signed-off-by: Jan Kara <jack@suse.cz> Cc: Paul Moore <paul@paul-moore.com> Cc: Eric Paris <eparis@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Zhang Zhen [Tue, 10 Feb 2015 22:08:30 +0000 (14:08 -0800)]
inotify: update documentation to reflect code changes
The inotify interface has changed a lot. The user interface was too
old, and the kernel interface was removed by Eric Paris in commit: 2dfc1ca inotify: remove inotify in kernel interface.
Signed-off-by: Zhang Zhen <zhenzhang.zhang@huawei.com> Cc: Wang Kai <morgan.wang@huawei.com> Cc: Eric Paris <eparis@parisplace.org> Cc: Robert Love <robert.w.love@intel.com> Cc: John McCutchan <john@johnmccutchan.com> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Lino Sanfilippo [Tue, 10 Feb 2015 22:08:27 +0000 (14:08 -0800)]
fanotify: don't set FAN_ONDIR implicitly on a marks ignored mask
Currently FAN_ONDIR is always set on a mark's ignored mask when the
event mask is extended without FAN_MARK_ONDIR being set. This may
result in events for directories being ignored unexpectedly for call
sequences like
Also FAN_MARK_ONDIR is only honored when adding events to a mark's mask,
but not for event removal. Fix both issues by not setting FAN_ONDIR
implicitly on the ignore mask any more. Instead treat FAN_ONDIR as any
other event flag and require FAN_MARK_ONDIR to be set by the user for
both event mask and ignore mask. Furthermore take FAN_MARK_ONDIR into
account when set for event removal.
[akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Eric Paris <eparis@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Lino Sanfilippo [Tue, 10 Feb 2015 22:08:24 +0000 (14:08 -0800)]
fanotify: don't recalculate a marks mask if only the ignored mask changed
If removing bits from a mark's ignored mask, the concerning
inodes/vfsmounts mask is not affected. So don't recalculate it.
[akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Eric Paris <eparis@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Lino Sanfilippo [Tue, 10 Feb 2015 22:08:21 +0000 (14:08 -0800)]
fanotify: only destroy mark when both mask and ignored_mask are cleared
In fanotify_mark_remove_from_mask() a mark is destroyed if only one of
both bitmasks (mask or ignored_mask) of a mark is cleared. However the
other mask may still be set and contain information that should not be
lost. So only destroy a mark if both masks are cleared.
Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Eric Paris <eparis@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Tue, 10 Feb 2015 21:56:56 +0000 (13:56 -0800)]
Merge tag 'stable/for-linus-3.20-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen features and fixes from David Vrabel:
- Reworked handling for foreign (grant mapped) pages to simplify the
code, enable a number of additional use cases and fix a number of
long-standing bugs.
- Prefer the TSC over the Xen PV clock when dom0 (and the TSC is
stable).
- Assorted other cleanup and minor bug fixes.
* tag 'stable/for-linus-3.20-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (25 commits)
xen/manage: Fix USB interaction issues when resuming
xenbus: Add proper handling of XS_ERROR from Xenbus for transactions.
xen/gntdev: provide find_special_page VMA operation
xen/gntdev: mark userspace PTEs as special on x86 PV guests
xen-blkback: safely unmap grants in case they are still in use
xen/gntdev: safely unmap grants in case they are still in use
xen/gntdev: convert priv->lock to a mutex
xen/grant-table: add a mechanism to safely unmap pages that are in use
xen-netback: use foreign page information from the pages themselves
xen: mark grant mapped pages as foreign
xen/grant-table: add helpers for allocating pages
x86/xen: require ballooned pages for grant maps
xen: remove scratch frames for ballooned pages and m2p override
xen/grant-table: pre-populate kernel unmap ops for xen_gnttab_unmap_refs()
mm: add 'foreign' alias for the 'pinned' page flag
mm: provide a find_special_page vma operation
x86/xen: cleanup arch/x86/xen/mmu.c
x86/xen: add some __init annotations in arch/x86/xen/mmu.c
x86/xen: add some __init and static annotations in arch/x86/xen/setup.c
x86/xen: use correct types for addresses in arch/x86/xen/setup.c
...
Linus Torvalds [Tue, 10 Feb 2015 21:51:06 +0000 (13:51 -0800)]
Merge tag 'microblaze-3.20-rc1' of git://git.monstr.eu/linux-2.6-microblaze
Pull Microblaze pupdates from Michal Simek:
- Remove various compilation errors
- Various code cleanup patches
- Add missing MB versions/architectures for autodetection
* tag 'microblaze-3.20-rc1' of git://git.monstr.eu/linux-2.6-microblaze:
microblaze: Remove *.dtb files in make clean
microblaze: whitespace fix
microblaze/uaccess: fix sparse errors
microblaze: intc: Reformat output
microblaze: intc: Refactor DT sanity check
microblaze: intc: Don't override error codes
microblaze: Add target architecture
microblaze: Add missing PVR version codes
microblaze: Fix variable types to remove W=1 warning
microblaze: Use unsigned type for limit comparison in cache.c
microblaze: Use unsigned type for proper comparison in cpuinfo*.c
microblaze: Use unsigned type for "for" loop because of comparison-kgdb.c
microblaze: Change extern inline to static inline
microblaze: Mark get_frame_size as static
microblaze: Use unsigned return type in do_syscall_trace_enter
microblaze: Declare microblaze_kgdb_break in header
microblaze: Remove unused prom header from reset.c
microblaze: Remove unused prom_parse.c
microblaze: Wire-up execveat syscall
microblaze: Use empty asm-generic/linkage.h
* pm-tools:
tools/power turbostat: relax dependency on APERF_MSR
tools/power turbostat: relax dependency on invariant TSC
tools/power turbostat: decode MSR_*_PERF_LIMIT_REASONS
tools/power turbostat: relax dependency on root permission
cpupower Makefile change to help run the tool without 'make install'
* pm-cpufreq: (46 commits)
intel_pstate: provide option to only use intel_pstate with HWP
cpufreq-dt: Drop unnecessary check before cpufreq_cooling_unregister() invocation
cpufreq: Create for_each_governor()
cpufreq: Create for_each_policy()
cpufreq: Drop cpufreq_disabled() check from cpufreq_cpu_{get|put}()
cpufreq: Set cpufreq_cpu_data to NULL before putting kobject
intel_pstate: honor user space min_perf_pct override on resume
intel_pstate: respect cpufreq policy request
intel_pstate: Add num_pstates to sysfs
intel_pstate: expose turbo range to sysfs
intel_pstate: Add support for SkyLake
cpufreq: stats: drop unnecessary locking
cpufreq: stats: don't update stats on false notifiers
cpufreq: stats: don't update stats from show_trans_table()
cpufreq: stats: time_in_state can't be NULL in cpufreq_stats_update()
cpufreq: stats: create sysfs group once we are ready
cpufreq: remove CPUFREQ_UPDATE_POLICY_CPU notifications
cpufreq: stats: drop 'cpu' field of struct cpufreq_stats
cpufreq: Remove (now) unused 'last_cpu' from struct cpufreq_policy
cpufreq: stats: rename 'struct cpufreq_stats' objects as 'stats'
...
* pm-domains:
PM: Convert dev_pm_put_subsys_data() into a void function
PM: Update function header for dev_pm_get_subsys_data()
PM / Domains: Handle errors from genpd's ->attach_dev() callback
PM / Domains: Re-order initialization of generic_pm_domain_data
PM / Domains: Free pm_subsys_data in error path in __pm_genpd_add_device()
PM / Domains: Eliminate the mutex for the generic_pm_domain_data
PM / Domains: Don't check for an existing device when adding a new
PM / Domains: Don't allow an existing generic_pm_domain_data
PM / Domains: Remove reference counting for the generic_pm_domain_data
PM / Domains: Rename __pm_genpd_alloc|free_dev_data()
PM / Domains: Remove pm_genpd_dev_need_restore() API
* acpi-resources: (23 commits)
Merge branch 'pci/host-generic' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci into acpi-resources
x86/irq, ACPI: Implement ACPI driver to support IOAPIC hotplug
ACPI: Add interfaces to parse IOAPIC ID for IOAPIC hotplug
x86/PCI: Refine the way to release PCI IRQ resources
x86/PCI/ACPI: Use common ACPI resource interfaces to simplify implementation
x86/PCI: Fix the range check for IO resources
PCI: Use common resource list management code instead of private implementation
resources: Move struct resource_list_entry from ACPI into resource core
ACPI: Introduce helper function acpi_dev_filter_resource_type()
ACPI: Add field offset to struct resource_list_entry
ACPI: Translate resource into master side address for bridge window resources
ACPI: Return translation offset when parsing ACPI address space resources
ACPI: Enforce stricter checks for address space descriptors
ACPI: Set flag IORESOURCE_UNSET for unassigned resources
ACPI: Normalize return value of resource parser functions
ACPI: Fix a bug in parsing ACPI Memory24 resource
ACPI: Add prefetch decoding to the address space parser
ACPI: Move the window flag logic to the combined parser
ACPI: Unify the parsing of address_space and ext_address_space
ACPI: Let the parser return false for disabled resources
...
* acpi-processor:
ACPI / cpuidle: Common callback routine for entering states
ACPI / cpuidle: Merge acpi_idle_enter_c1() and acpi_idle_enter_simple()
ACPI / cpuidle: Drop flags.bm_check tests from acpi_idle_enter_bm()
ACPI / cpuidle: Clean up white space in a switch statement
ACPI / cpuidle: Drop irrelevant comment from acpi_idle_enter_simple()
ACPI / cpuidle: Clean up fallback to C1 checks
ACPI / cpuidle: Drop unnecessary calls from ->enter callback routines
ACPI / cpuidle: Drop unnecessary calls from acpi_idle_do_entry()
projects / linux-beck.git / log