Olof Johansson [Fri, 14 Jun 2013 21:28:57 +0000 (14:28 -0700)]
Merge branch 'next/cleanup' into for-next
* next/cleanup:
ARM: OMAP4: hwmod data: Remove irq entries from mcspi, mmc hwmods
ARM: OMAP4: hwmod data: add DSS data back
ARM: OMAP4: hwmod data: Clean up the data file
ARM: AM33XX: hwmod data: irq, dma and addr info clean up
ARM: OMAP2+: Remove omap4 ocp2scp pdata
ARM: OMAP2+: Remove omap4 pdata for USB
ARM: OMAP2+: Remove omap4 pdata from hsmmc.c
ARM: OMAP2+: Remove legacy mux data for omap4
ARM: OMAP2+: Remove board-omap4panda.c
ARM: OMAP2+: Remove board-4430sdp.c
ARM: OMAP2+: Legacy support for wl12xx when booted with devicetree
Olof Johansson [Fri, 14 Jun 2013 21:28:22 +0000 (14:28 -0700)]
Merge tag 'omap-for-v3.11/cleanup-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup
From Tony Lindgren:
Move omap4 over to device tree based booting. This allows us to get rid
a big pile of platform init code for things that are already handled by
device tree related code. As am33xx is already device tree based, we
can also remove the same data for am33xx.
* tag 'omap-for-v3.11/cleanup-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP4: hwmod data: Remove irq entries from mcspi, mmc hwmods
ARM: OMAP4: hwmod data: add DSS data back
ARM: OMAP4: hwmod data: Clean up the data file
ARM: AM33XX: hwmod data: irq, dma and addr info clean up
ARM: OMAP2+: Remove omap4 ocp2scp pdata
ARM: OMAP2+: Remove omap4 pdata for USB
ARM: OMAP2+: Remove omap4 pdata from hsmmc.c
ARM: OMAP2+: Remove legacy mux data for omap4
ARM: OMAP2+: Remove board-omap4panda.c
ARM: OMAP2+: Remove board-4430sdp.c
ARM: OMAP2+: Legacy support for wl12xx when booted with devicetree
Resolved merge conflict due to a fix for 3.10 (the fix is removed since
the code is no longer used -- data comes from device tree).
Olof Johansson [Fri, 14 Jun 2013 21:08:00 +0000 (14:08 -0700)]
Merge branch 'next/fixes-non-critical' into for-next
* next/fixes-non-critical:
ARM: OMAP2+: omap-usb-host: Fix memory leaks
ARM: OMAP2+: Fix serial init for device tree based booting
arm/omap: use const char properly
ARM: OMAP2+: devices: Do not print error when dss_hdmi hwmod lookup fails
ARM: OMAP2+: devices: Do not print error when DMIC hwmod lookup fails
ARM: OMAP2+: devices: Do not print error when McPDM hwmod lookup fails
ARM: OMAP: add vdds_sdi supply for omapdss_sdi.0
ARM: OMAP: add vdds_dsi supply for omapdss_dpi.0
ARM: OMAP: fix dsi regulator names
ARM: OMAP2+: control: add OMAP5 support for dsp boot programming
Olof Johansson [Fri, 14 Jun 2013 21:07:01 +0000 (14:07 -0700)]
Merge tag 'omap-for-v3.11/fixes-non-critical-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/fixes-non-critical
From Tony Lindgren:
Non-critical fixes for omaps for v3.11 merge window.
* tag 'omap-for-v3.11/fixes-non-critical-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: omap-usb-host: Fix memory leaks
ARM: OMAP2+: Fix serial init for device tree based booting
arm/omap: use const char properly
ARM: OMAP2+: devices: Do not print error when dss_hdmi hwmod lookup fails
ARM: OMAP2+: devices: Do not print error when DMIC hwmod lookup fails
ARM: OMAP2+: devices: Do not print error when McPDM hwmod lookup fails
ARM: OMAP: add vdds_sdi supply for omapdss_sdi.0
ARM: OMAP: add vdds_dsi supply for omapdss_dpi.0
ARM: OMAP: fix dsi regulator names
+ Linux 3.10-rc5
Olof Johansson [Wed, 12 Jun 2013 23:51:19 +0000 (16:51 -0700)]
Merge branch 'next/drivers' into for-next
* next/drivers:
gpio: samsung: Remove OF support for s3c24xx
pinctrl: Add pinctrl-s3c24xx driver
cpufreq: s3c24xx: move cpufreq driver to drivers/cpufreq
Olof Johansson [Wed, 12 Jun 2013 23:26:33 +0000 (16:26 -0700)]
Merge tag 'exynos-dt-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt
From Kukjin Kim:
Update exynos DT for
- usb3phy and dwc3 for exynos5250
- keypad for exynos4412
- TMU clock for exynos4210
- MFC clock for exynos4
- DP controller for exynos5250
- G2D clock for exynos4
- some exynos boards
* tag 'exynos-dt-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (456 commits)
ARM: dts: add ohci and ehci controller nodes for EXYNOS5440
ARM: dts: Update G2D documentation for clock entries
ARM: dts: Add clock entries to G2D node for exynos4x12
ARM: dts: Add clock entries to G2D node for exynos4210
ARM: dts: Remove duplicate and add missing G2D nodes
clk: exynos4: Add additional G2D clocks
ARM: dts: Document DP clock in samsung,exynos5-dp binding
ARM: dts: add pin state information for DP HPD support to Exynos5250
ARM: dts: add dts node for the ahci sata exynos5440
ARM: dts: add vmmc regulator support for ODROID-X
ARM: dts: add max77686 node entry for ODROID-X
ARM: dts: Enable RTC by default on EXYNOS5440
ARM: dts: Add display timing node to exynos5250-arndale.dts
ARM: dts: Add clock provider information for DP controller in Exynos5250 SoC
ARM: dts: Add DT node for DP controller for Arndale Board
ARM: dts: Remove combiner IRQ node from exynos4x12.dtsi
ARM: dts: add max8997 device node for exynos4210-origen board
ARM: dts: Enable TMU on Origen4210 board
ARM: dts: Add TMU clock entries to exynos4210.dtsi
ARM: dts: Update MFC documentation for clock entries
...
Olof Johansson [Wed, 12 Jun 2013 23:12:03 +0000 (16:12 -0700)]
Merge tag 's3c24xx-arch-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/soc
From Kukjin Kim, DMA driver updates for s3c24xx.
* tag 's3c24xx-arch-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: S3C24XX: remove obsolete s3c2412 specific dma settings
ARM: S3C24XX: dma-s3c2443 - do not write into arbitary bits
ARM: S3C24XX: split s3c2412 spi dma channels
Olof Johansson [Wed, 12 Jun 2013 19:32:19 +0000 (12:32 -0700)]
Merge branch 'next/drivers' into for-next
* next/drivers:
clocksource: dw_apb_timer_of: use clocksource_of_init
clocksource: dw_apb_timer_of: select DW_APB_TIMER
clocksource: dw_apb_timer_of: add clock-handling
clocksource: dw_apb_timer_of: enable the use the clocksource as sched clock
Olof Johansson [Wed, 12 Jun 2013 19:32:01 +0000 (12:32 -0700)]
Merge tag 'dw_apb_timer_of' of git://github.com/mmind/linux-rockchip into next/drivers
From Heiko Stuebner, enhancements for dw_apb_timer:
- use DECLARE_CLOCKSOURCE_OF and convert its users
- handle the sptimer not being present as sched_clock
- add optional handling of timer clocks
* tag 'dw_apb_timer_of' of git://github.com/mmind/linux-rockchip:
clocksource: dw_apb_timer_of: use clocksource_of_init
clocksource: dw_apb_timer_of: select DW_APB_TIMER
clocksource: dw_apb_timer_of: add clock-handling
clocksource: dw_apb_timer_of: enable the use the clocksource as sched clock
Commit '3b9b10151c6838af52244cec4af41a938bb5b7ec' cleaned up the
data file to remove all irq and dma entries for all hwmods, which
are now populated by DT. But mcspi and mmc irq, dma entries were
retained since MMC, NFS boot was not working. Since it is root caused
to be an issue with only DMA entries [1], irq can be safely removed.
Peter Ujfalusi [Tue, 11 Jun 2013 08:32:00 +0000 (10:32 +0200)]
ARM: OMAP2+: devices: Do not print error when dss_hdmi hwmod lookup fails
The dss_hdmi hwmod is used to create the HDMI audio device for OMAP4+
When we boot the kernel we can silently ignore the failure since the IP
does not exist on them.
Reported-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Tomi Valkeinen [Fri, 31 May 2013 07:37:54 +0000 (10:37 +0300)]
ARM: OMAP: add vdds_sdi supply for omapdss_sdi.0
SDI driver gets currently the vdds_sdi regulator via omapdss device.
This is not correct, and we'll change the SDI driver to get the
regulator directly via omapdss_sdi.0 device.
This patch changes the rx51 board file to add vdds_dsi supply for
omapdss_sdi.0 device.
Note that the vdds_sdi supply for omapdss device is still left there, as
the current display driver uses it. When both the board files and the
display driver has been changed, we can remove the unused supply.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Tomi Valkeinen [Fri, 31 May 2013 07:37:53 +0000 (10:37 +0300)]
ARM: OMAP: add vdds_dsi supply for omapdss_dpi.0
DPI driver gets currently the vdds_dsi regulator via omapdss device.
This is not correct, and we'll change the DPI driver to get the
regulator directly via omapdss_dpi.0 device.
This patch changes the relevant board files to add vdds_dsi supply for
omapdss_dpi.0 device.
Note that the vdds_dsi supply for omapdss device is still left there, as
the current display driver uses it. When both the board files and the
display driver has been changed, we can remove the unused supply.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Tomi Valkeinen [Fri, 31 May 2013 07:37:52 +0000 (10:37 +0300)]
ARM: OMAP: fix dsi regulator names
board-cm-t35.c and board-ldp.c contain regulator supply entries for
vdds_dsi. However, the given device name is wrong.
This patch fixes the device name from omapdss_dsi1 to omapdss_dsi.0.
Note that as far as I know, DSI driver is not used on these boards, so
this should not have caused any problems. The DSI block can be used to
generate clock for DPI, though, but that's not enabled for omap3 boards
currently.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Tomi Valkeinen [Tue, 11 Jun 2013 07:37:19 +0000 (10:37 +0300)]
ARM: OMAP4: hwmod data: add DSS data back
Commit 3b9b10151c6838af52244cec4af41a938bb5b7ec (ARM: OMAP4: hwmod data:
Clean up the data file) removes hwmod data for omap4, including DSS
data. DSS has not yet been converted to DT, so the hwmod data is still
needed.
This patch adds back the DSS parts of the hwmod data.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Heiko Stuebner [Tue, 4 Jun 2013 09:38:42 +0000 (11:38 +0200)]
clocksource: dw_apb_timer_of: use clocksource_of_init
dw_apb_timer_init used to search the devicetree for matching timer
devices, making calls to it from board files necessary.
Change the dw_apb_timer_init to work with CLOCKSOURCE_OF_DECLARE.
With this change the function gets called once for each timer node
and tracks these number of calls to attach clockevent and clocksource
devices to the nodes.
Also remove the calls to dw_apb_timer_init from all previous users, as
clocksource_of_init is the default for init_time now.
Heiko Stuebner [Tue, 4 Jun 2013 09:37:36 +0000 (11:37 +0200)]
clocksource: dw_apb_timer_of: add clock-handling
Add the possibility to get the clock-frequency from a timer clock instead
of specifying it as dt property. Additionally also add the possibility
to also define a controlling periphal clock for the timer block.
The clock-frequency property is kept to act as fallback if no clocks
are specified.
Heiko Stuebner [Tue, 4 Jun 2013 09:37:02 +0000 (11:37 +0200)]
clocksource: dw_apb_timer_of: enable the use the clocksource as sched clock
Currently the dw_apb_timer always expects a separate special timer to be
availbable for the sched_clock. Some devices using dw_apb_timers do not
have this sptimer but can use the clocksource as sched_clock instead.
Therefore enable the driver to distiguish between devices with and without
sptimer based on the devicetree data and select the correct timer as
sched_clock.
Olof Johansson [Wed, 12 Jun 2013 00:01:01 +0000 (17:01 -0700)]
Merge tag 'fixes-3.10-4' of git://git.infradead.org/users/jcooper/linux into fixes
From Jason Cooper, mvebu fixes for v3.10 round 4:
- mvebu
- fix PCIe ranges property so NOR flash is visible
- kirkwood
- fix identification of 88f6282 so MPPs can be set correctly
* tag 'fixes-3.10-4' of git://git.infradead.org/users/jcooper/linux:
arm: mvebu: armada-xp-{gp,openblocks-ax3-4}: specify PCIe range
ARM: Kirkwood: handle mv88f6282 cpu in __kirkwood_variant().
Dinh Nguyen [Wed, 5 Jun 2013 15:02:55 +0000 (10:02 -0500)]
ARM: socfpga: Add support to gate peripheral clocks
Add support to gate the clocks that directly feed peripherals. For clocks
with multiple parents, add the ability to determine the correct parent,
and also set parents. Also add support to calculate and set the clocks'
rate.
Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Reviewed-by: Pavel Machek <pavel@denx.de> Acked-by: Mike Turquette <mturquette@linaro.org> Cc: Mike Turquette <mturquette@linaro.org> CC: Arnd Bergmann <arnd@arndb.de> CC: Olof Johansson <olof@lixom.net> Cc: Pavel Machek <pavel@denx.de> CC: <linux@arm.linux.org.uk>
v4:
- Add Acked-by: Mike Turquette
v3:
- Addressed comments from Pavel
v2:
- Fix space/indent errors
- Add streq for strcmp == 0 Signed-off-by: Olof Johansson <olof@lixom.net>
Dinh Nguyen [Wed, 5 Jun 2013 15:02:53 +0000 (10:02 -0500)]
ARM: socfpga: dts: Add ethernet bindings for SOCFPGA
Add entry for 2nd GMAC controller. Add the correct clocks for the GMAC.
Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Reviewed-by: Pavel Machek <pavel@denx.de> CC: Arnd Bergmann <arnd@arndb.de> CC: Olof Johansson <olof@lixom.net> Cc: Pavel Machek <pavel@denx.de> CC: <linux@arm.linux.org.uk>
v2:
- Moved "disabled" status to dtsi file Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Tue, 11 Jun 2013 22:58:00 +0000 (15:58 -0700)]
Merge branch 'next/soc' into for-next
* next/soc:
ARM: clps711x: Update defconfig
ARM: clps711x: Add support for SYSCON driver
ARM: clps711x: edb7211: Control LCD backlight via PWM
ARM: clps711x: edb7211: Add support for I2C
ARM: clps711x: Optimize interrupt handling
ARM: clps711x: Add clocksource framework
ARM: clps711x: Replace "arch_initcall" in common code with ".init_early"
ARM: clps711x: Move specific definitions from hardware.h to boards files
ARM: clps711x: p720t: Define PLD registers as GPIOs
ARM: clps711x: autcpu12: Move remaining specific definitions to board file
ARM: clps711x: autcpu12: Special driver for handling memory is removed
ARM: clps711x: autcpu12: Add support for NOR flash
ARM: clps711x: autcpu12: Move LCD DPOT definitions to board file
ARM: clps711x: Set PLL clock to zero if we work from 13 mHz source
ARM: clps711x: Remove NEED_MACH_MEMORY_H dependency
ARM: clps711x: Re-add GPIO support
GPIO: clps711x: Add DT support
GPIO: clps711x: Rewrite driver for using generic GPIO code
Olof Johansson [Tue, 11 Jun 2013 22:57:17 +0000 (15:57 -0700)]
Merge branch 'clps711x/soc' into next/soc
From Alexander Shiyan, this is a series of cleanups of clps711x, movig it
closer to multiplatform and cleans up a bunch of old code.
* clps711x/soc:
ARM: clps711x: Update defconfig
ARM: clps711x: Add support for SYSCON driver
ARM: clps711x: edb7211: Control LCD backlight via PWM
ARM: clps711x: edb7211: Add support for I2C
ARM: clps711x: Optimize interrupt handling
ARM: clps711x: Add clocksource framework
ARM: clps711x: Replace "arch_initcall" in common code with ".init_early"
ARM: clps711x: Move specific definitions from hardware.h to boards files
ARM: clps711x: p720t: Define PLD registers as GPIOs
ARM: clps711x: autcpu12: Move remaining specific definitions to board file
ARM: clps711x: autcpu12: Special driver for handling memory is removed
ARM: clps711x: autcpu12: Add support for NOR flash
ARM: clps711x: autcpu12: Move LCD DPOT definitions to board file
ARM: clps711x: Set PLL clock to zero if we work from 13 mHz source
ARM: clps711x: Remove NEED_MACH_MEMORY_H dependency
ARM: clps711x: Re-add GPIO support
GPIO: clps711x: Add DT support
GPIO: clps711x: Rewrite driver for using generic GPIO code
+ Linux 3.10-rc4
Alexander Shiyan [Mon, 13 May 2013 17:07:36 +0000 (21:07 +0400)]
ARM: clps711x: Add support for SYSCON driver
This patch adds support for SYSCON driver for CLPS711X targets.
At this time there are no users for this driver, but it is will
be used as start point to use in CLPS711X drivers and remove
<mach/xx> dependencies.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Olof Johansson <olof@lixom.net>
This patch removes dependency of NEED_MACH_MEMORY_H for CLPS711X-target.
Since some board may have memory holes, define ARCH_HAS_HOLES_MEMORYMODEL
for these boards.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Olof Johansson <olof@lixom.net>
Alexander Shiyan [Fri, 26 Apr 2013 15:47:29 +0000 (19:47 +0400)]
ARM: clps711x: Re-add GPIO support
arch_initcall was been removed from GPIO driver, so this patch
re-add support for GPIO into boards as platform_device.
Since some drivers (spi, nand, etc.) is not support deferred probe,
separate machine init calls is used in board code to make proper
loading sequence.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
There is no users of this code and there is already a pinctrl
driver written for s3c24xx which is going to be used on any
s3c24xx DT platforms. Hence this has been effectively a dead
code in mainline.
Thomas Abraham [Tue, 11 Jun 2013 19:58:34 +0000 (04:58 +0900)]
ARM: dts: add ohci and ehci controller nodes for EXYNOS5440
EXYNOS5440 includes both OHCI and EHCI usb host controllers.
This patch adds device tree nodes for both of them. And the
EHCI and OHCI controllers on exynos5440 do not need any
explicit phy configuration. So need to assign a different
compatible value for these controllers.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Sachin Kamat [Mon, 10 Jun 2013 08:52:20 +0000 (17:52 +0900)]
ARM: dts: Remove duplicate and add missing G2D nodes
G2D node got added twice in exynos4412-smdk4412.dts instead of
getting added to exynos4412-origen.dts. Remove the duplicate entry
and add it to exynos4412-origen.dts.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Sachin Kamat [Mon, 10 Jun 2013 08:49:41 +0000 (17:49 +0900)]
clk: exynos4: Add additional G2D clocks
Add G2D clocks for Exynos4x12 SoC and sclk_fimg2d required by G2D
IP.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Tomasz Figa [Fri, 17 May 2013 16:24:29 +0000 (18:24 +0200)]
ARM: SAMSUNG: pm: Adjust for pinctrl- and DT-enabled platforms
This patch makes legacy code on suspend/resume path being executed
conditionally, on non-DT platforms only, to fix suspend/resume of
DT-enabled systems, for which the code is inappropriate.
Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
[olof: add #include <linux/of.h>] Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Tue, 11 Jun 2013 07:33:14 +0000 (00:33 -0700)]
Merge tag 'renesas-boards-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/boards
From Simon Horman:
Renesas ARM-based SoC board updates for v3.11
Highlights:
bockw: add SDHI0 support
bockw: add dummy regulators for SMSC
bockw: Document CN9 SCIF/RCAN dipswitch selection
lager: support GPIO switches and LEDs
kzm9g: add AS3711 PMIC platform data
marzen: Use INTC External IRQ pin driver for SMSC
ape6evm: Update MP clock parent become EXTAL2 in line with changes
to r8a73a4 SoC code
* tag 'renesas-boards-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: marzen: keep local function as static
ARM: shmobile: bockw: add SDHI0 support
ARM: shmobile: marzen: Use INTC External IRQ pin driver for SMSC
ARM: shmobile: lager: support GPIO switches
ARM: shmobile: lager: Add GPIO LEDs
ARM: shmobile: bockw: add dummy regulators for SMSC
ARM: shmobile: bockw: add CN9 SCIF/RCAN selection dipswitch explanation
ARM: shmobile: kzm9g: add AS3711 PMIC platform data
ARM: shmobile: kzm9d: resigser smsc911x platform device with id -1
ARM: shmobile: bockw: define FPGA address and rename iomem variable
ARM: shmobile: ape6evm: MP clock parent become EXTAL2
Olof Johansson [Tue, 11 Jun 2013 07:31:14 +0000 (00:31 -0700)]
Merge tag 'renesas-soc-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc
From Simon Horman:
Renesas ARM-based SoC updates for v3.11
* Increased clock coverage for r8a7740, r8a73a4, r8a7778 and r8a7790
* Use fixed clock ratio for r8a7778
* Always use shmobile_setup_delay for sh73a0
* Add add CPUFreq support for sh73a0
* Check kick bit before changing rate on sh73a0
* Do not overwrite all div4 clock operations on sh73a0
* Cleanup SH_FIXED_RATIO_CLK and SH_FIXED_RATIO_CLK macros
* sh73a0: Use DEFINE_RES_MEM*() everywhere
* r8a7740: Make private clock arrays static
* r8a7778: Correct model number
The last four changes listed above are cleanups. I have included them
in this series as all bar the last one are dependencies of non-cleanup
patches.
* tag 'renesas-soc-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (27 commits)
ARM: shmobile: sh73a0: div4 clocks must check the kick bit before changing rate
ARM: shmobile: sh73a0: do not overwrite all div4 clock operations
ARM: shmobile: sh73a0: Always use shmobile_setup_delay()
ARM: shmobile: sh73a0: add CPUFreq support
ARM: shmobile: sh73a0: add support for adjusting CPU frequency
ARM: shmobile: r8a7790: add TPU PWM support
ARM: shmobile: r8a7790: Make private clock arrays static
ARM: shmobile: r8a7790: add div6 clocks
ARM: shmobile: r8a7790: add div4 clocks
ARM: shmobile: r8a7790: add main clock
ARM: shmobile: r8a7778: Register SDHI device
ARM: shmobile: r8a7778: add SDHI clock support
ARM: shmobile: r8a7778: use fixed ratio clock
ARM: shmobile: r8a7779: Add PCIe clocks
ARM: shmobile: r8a73a4: add div6 clocks
ARM: shmobile: r8a73a4: add div4 clocks
ARM: shmobile: r8a73a4: add pll clocks
ARM: shmobile: r8a73a4: add main clock
ARM: shmobile: r8a7740: add TPU PWM support
ARM: shmobile: r8a7740: Add I2C DT clock names
...
Olof Johansson [Tue, 11 Jun 2013 07:21:46 +0000 (00:21 -0700)]
Merge tag 'renesas-pinmux-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc
From Simon Horman:
Renesas ARM based SoC pinmux and GPIO update for v3.11
SH-PFC:
* Entries for INTC external IRQs
* Remove dependency on GPIOLIB
* PFC support for r8a7790 SoC
* Pinmux support for r8a7778 SoC
* Increase pin group and function coverage for sh7372, r8a7740,
r8a7778, r8a7779 and r8a7790 SoCs
* Use pinctrl mapping on mackerel, ap4evb, armadillo800eva,
bonito, bockw, lager boards
* Use RCAR_GP_PIN macro in marzen board
* Remove unused GPIOs for sh7372, sh73a0, r8a7740 and r8a7790 SoCs
* Add bias (pull-up/down) pinconf support for r8a7740 SoC
* Add VCCQ support for sh73a0
GPIO car:
* Add RCAR_GP_PIN macro
* Add support for IRQ_TYPE_EDGE_BOTH
* Make the platform data gpio_base field signed
The GPIO changes have been included as the RCAR_GP_PIN and
IRQ_TYPE_EDGE_BOTH changes are depended on by SH-PFC changes.
* tag 'renesas-pinmux-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (132 commits)
ARM: shmobile: marzen: Use RCAR_GP_PIN macro
ARM: shmobile: lager: Initialize pinmux
ARM: shmobile: bockw: add pinctrl support
ARM: shmobile: kzm9g: tidyup FSI pinctrl
ARM: shmobile: r8a7740 pinmux platform device cleanup
ARM: shmobile: r8a7790: Configure R-Car GPIO for IRQ_TYPE_EDGE_BOTH
pinctrl: sh-pfc: r8a7779: Fix missing MOD_SEL2 entry
Revert "ARM: shmobile: Disallow PINCTRL without GPIOLIB"
pinctrl: r8a7790: add pinmux data for MMCIF and SDHI interfaces
sh-pfc: r8a7778: add MMCIF pin groups
sh-pfc: r8a7778: add HSPI pin groups
sh-pfc: r8a7778: add I2C pin groups
pinctrl: sh-pfc: fix a typo in pfc-r8a7790
pinctrl: sh-pfc: fix r8a7790 Function Select register tables
sh-pfc: r8a7778: fixup IRQ1A settings
sh-pfc: r8a7779: add Ether pin groups
sh-pfc: r8a7778: add Ether pin groups
sh-pfc: r8a7778: add VIN pin groups
sh-pfc: sh73a0: Remove function GPIOs
sh-pfc: r8a7790: Add TPU pin groups and functions
...
Haojian Zhuang [Fri, 7 Jun 2013 03:17:07 +0000 (11:17 +0800)]
ARM: prima2: fix incorrect panic usage
In prima2, some functions of checking DT is registered in initcall
level. If it doesn't match the compatible name of sirf, kernel
will panic. It blocks the usage of multiplatform on other verndor.
The error message is in below.
Knic - not syncing: unable to find compatible pwrc node in dtb
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.0-rc3-00006-gd7f26ea-dirty #86
[<c0013adc>] (unwind_backtrace+0x0/0xf8) from [<c0011430>] (show_stack+0x10/0x1)
[<c0011430>] (show_stack+0x10/0x14) from [<c026f724>] (panic+0x90/0x1e8)
[<c026f724>] (panic+0x90/0x1e8) from [<c03267fc>] (sirfsoc_of_pwrc_init+0x24/0x)
[<c03267fc>] (sirfsoc_of_pwrc_init+0x24/0x58) from [<c0320864>] (do_one_initcal)
[<c0320864>] (do_one_initcall+0x90/0x150) from [<c0320a20>] (kernel_init_freeab)
[<c0320a20>] (kernel_init_freeable+0xfc/0x1c4) from [<c026b9e8>] (kernel_init+0)
[<c026b9e8>] (kernel_init+0x8/0xe4) from [<c000e158>] (ret_from_fork+0x14/0x3c)
Signen-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Tue, 11 Jun 2013 05:13:52 +0000 (22:13 -0700)]
Merge tag 'renesas-dt-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt
From Simon Horman:
Renesas ARM-based SoC DT updates for v3.11
* Armadillo800eva reference DT - bring up armadillo800eva baord
using DT as much as possible
* Remove unused GIC dtsi entries for r8a7790 and r8a73a4
* Add AS3711 and CPUFreq DT bindings for kzm9g-reference
* Add irqpin DT support for marzen-reference
* tag 'renesas-dt-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: marzen-reference: add irqpin support in DT
ARM: shmobile: kzm9g-reference: add AS3711 and CPUFreq DT bindings
ARM: shmobile: armadillo800eva: Reference DT implementation
ARM: shmobile: Remove unused r8a7790 GIC CPU interface DT bits
ARM: shmobile: Remove unused r8a73a4 GIC CPU interface DT bits
ARM: shmobile: r8a7740: Prepare for reference DT setup
ARM: shmobile: r8a7740: Add OF support to initialze the GIC
* tag 'renesas-defconfig-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: kzm9g: enable AS3711 PMIC in defconfig
ARM: shmobile: bockw: enable USB in defconfig
ARM: shmobile: bockw: enable CONFIG_PM_RUNTIME in defconfig
ARM: shmobile: bockw: enable I2C in defconfig
ARM: shmobile: bockw: enable SDHI on defconfig
ARM: shmobile: armadillo800eva: Fix maximum number of SCIF
Olof Johansson [Tue, 11 Jun 2013 04:42:48 +0000 (21:42 -0700)]
Merge branch 'next/dt' into for-next
* next/dt:
ARM: Kirkwood add cpus definition needed by cpufreq driver to dtsi
ARM: kirkwood: add i2c-gpio controller for km_kirkwood
ARM: kirkwood: refactor dtsi to largest common nodes
Signed-off-by: Olof Johansson <olof@lixom.net>
Conflicts:
arch/arm/boot/dts/kirkwood-6281.dtsi
Olof Johansson [Tue, 11 Jun 2013 04:39:37 +0000 (21:39 -0700)]
Merge tag 'dt-3.11-4' of git://git.infradead.org/users/jcooper/linux into next/dt
From Jason Cooper:
mvebu dt changes for v3.11 (round 4)
- kirkwood
- reshuffle nodes from kirkwood.dtsi to -6281.dtsi, etc
- add i2c-gpio for km_kirkwood
- add cpu node so pending cpufreq driver will init
* tag 'dt-3.11-4' of git://git.infradead.org/users/jcooper/linux:
ARM: Kirkwood add cpus definition needed by cpufreq driver to dtsi
ARM: kirkwood: add i2c-gpio controller for km_kirkwood
ARM: kirkwood: refactor dtsi to largest common nodes
Arnd Bergmann [Mon, 10 Jun 2013 14:48:36 +0000 (16:48 +0200)]
ARM: dts: add missing cpu #address-cell values
A recent series has added CPU numbers to a lot of dts files,
but unfortunately in a few cases the #address-cells
and #size-cells values are missing, which causes build warnings.
This adds the missing ones for sunxi and sama5 that I found
through build testing.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Youngmin Nam [Mon, 10 Jun 2013 08:06:59 +0000 (17:06 +0900)]
ARM: dts: Enable RTC by default on EXYNOS5440
RTC is a basic feature of EXYNOS5440. But it was disabled
by issue that comes from EXYNOS5250. (commit id: 522ccdb6)
That issue only applies to EXYNOS5250 not EXYNOS5440. So,
there is no issue with enabled RTC on EXYNOS5440. This
change was tested on EXYNOS5440.
Signed-off-by: Youngmin Nam <youngmin.nam@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
projects / karo-tx-linux.git / log