With conccurency managed workqueues, use of dedicated workqueues can
be replaced by system_wq. Drop cvm_oct_poll_queue by using system_wq.
There are multiple work items per cvm_oct_poll_queue (viz.
cvm_oct_rx_refill_work, port_periodic_work) and different
cvm_oct_poll_queues need not be be ordered. Hence, concurrency
can be increased by switching to system_wq.
All work items are sync canceled in cvm_oct_remove() so it
is guaranteed that no work is in flight by the time exit path runs.
Bhumika Goyal [Tue, 1 Mar 2016 19:44:57 +0000 (01:14 +0530)]
Staging: rtl8192u: Replace random_ether_addr with eth_random_addr
The macro random_ether_addr is calling the function eth_random_addr.
Therefore, the call to random_ether_addr can be replaced with
eth_random_addr.
Remove the wrapper function ieee80211_randomize_cell and replace its
call with eth_random_addr as it is wrapping random_ether_addr.
Done using coccinelle:
Bhumika Goyal [Tue, 1 Mar 2016 18:48:31 +0000 (00:18 +0530)]
Staging: rtl8192u: Replace memset with eth_broadcast_addr
Use eth_broadcast_addr to assign the broadcast address to the given
address array instead of memset when the second argument is a broacast
address 0xff. ETH_ALEN is a macro with value 6, so 6 is treated as
ETH_ALEN if it is the third argument of memset.
The pointer *skb2 is declared 'globally' inside ifdef NOT_YET.
It's used nowhere in the directory.
Another pointer *skb2 is declared 'locally', again inside another ifdef NOT_YET
in the function ieee80211_rx_frame_mgmt.
Hence, skb2 stays unused and has been removed.
This was done using Coccinelle:
@@ type T; identifier i; constant c; @@
-T i;
<... when != i
-i = c;
...>
Bhumika Goyal [Wed, 24 Feb 2016 17:16:00 +0000 (22:46 +0530)]
Staging: rtl8192u: Remove debug messages
As kmalloc generates a backtrace on failure so there is no need of
these debug messages when kmalloc fails. Also remove unwanted {} around if
block after removal of these messages.
Bhumika Goyal [Wed, 24 Feb 2016 10:17:35 +0000 (15:47 +0530)]
Staging: rtl8192u: Clean up tests if NULL returned on failure
Some functions return Null as their return value on failure. !x is
generally preferred over x==NULL or NULL==x. So make use of !x if
the value returned on failure is NULL.
Done using coccinelle:
@@
expression e;
statement S;
@@
e = \(kmalloc\|devm_kzalloc\|kmalloc_array
\|devm_ioremap\|usb_alloc_urb\|alloc_netdev\)(...);
- if(e==NULL)
+ if(!e)
S
Bhumika Goyal [Tue, 1 Mar 2016 19:42:03 +0000 (01:12 +0530)]
Staging: rtl8192e: Replace random_ether_addr with eth_random_addr
The macro random_ether_addr is calling the function eth_random_addr.
Therefore, the call to random_ether_addr can be replaced with
eth_random_addr.
Remove the wrapper function rtllib_randomize_cell and replace its
call with eth_random_addr as it is wrapping random_ether_addr.
With conccurency managed workqueues, use of dedicated workqueues can
be replaced by system_wq. Drop priv_wq by using system_wq.
Since there are multiple work items per priv but they do not need
to be ordered, increase of concurrency by switching to system_wq
should not break anything.
All work items are sync canceled on so it is guaranteed that
no work is running when rtl92e_suspend function is called.
With conccurency managed workqueues, use of dedicated workqueues can
be replaced by system_wq. Drop wq by using system_wq.
Since there are multiple work items per rtllib but they do not need to
be ordered, increase of concurrency by switching to system_wq should
not break anything.
All work items are sync canceled on rtllib_stop_protocol() so it is
guaranteed that no work is running when rtl92e_disable/reset/restart
functions are called.
This patch removes unnecessary return variables and compresses the
return logic.
The coccinelle script that finds and fixes this issue is:
@@ type T; identifier i,f; constant C; @@
- T i;
...when != i
when strict
( return -C;
|
- i =
+ return
f(...);
- return i;
)
Bhumika Goyal [Wed, 24 Feb 2016 17:04:31 +0000 (22:34 +0530)]
Staging: rtl8723au: Remove debug messages
As kmalloc generates a backtrace on failure so there is no need of these
debug messages when kmalloc fails. Also remove unwanted {} around if block
after removal of these messages.
Bhumika Goyal [Wed, 24 Feb 2016 10:23:57 +0000 (15:53 +0530)]
Staging: rtl8723au: Clean up tests if NULL returned on failure
Some functions like kmalloc/usb_alloc_urb returns Null as their return
value on failure. !x is generally preferred over x==NULL or NULL==x. So
make use of !x if the value returned on failure by these functions is NULL.
Done using coccinelle:
@@
expression e;
statement S;
@@
e = \(kmalloc\|devm_kzalloc\|kmalloc_array
\|devm_ioremap\|usb_alloc_urb\|alloc_netdev\)(...);
- if(e==NULL)
+ if(!e)
S
gsc_hpdi_auto_attach does not affect interrupt status but contains a
call to comedi_alloc_devpriv() which calls kzalloc with GFP_KERNEL flag.
Thus, there seems to be no danger that dma_alloc_coherent can be called
with interrupts turned off, and GFP_KERNEL can be used.
Sandhya Bankar [Sun, 6 Mar 2016 10:20:35 +0000 (15:50 +0530)]
Staging: most: Use usb_endpoint_dir_in(endpoint) instead of (endpoint->bEndpointAddress & USB_DIR_IN).
Use usb_endpoint_dir_in(endpoint) instead of (endpoint->bEndpointAddress & USB_DIR_IN) to check if the endpoint has IN direction.
This correction is based on following semantic patch,
Bhumika Goyal [Sat, 5 Mar 2016 13:46:40 +0000 (19:16 +0530)]
Staging: most: Replace pr_err with dev_err
All devm functions has a device structure as the first argument which is
required by dev_{err,info,dbg} printing functions.
This patch converts pr_err to dev_err as dev_* is preferred after calls
to devm functions.
Rehas Sachdeva [Fri, 26 Feb 2016 12:57:05 +0000 (18:27 +0530)]
staging: vt6656: Remove unnecessary parentheses
This patch removes the following checkpatch.pl warnings:
Unnecessary parentheses around al7230_init_table_amode[0][0]
Unnecessary parentheses around al7230_channel_table2[0][0]
James Simmons [Tue, 8 Mar 2016 22:35:29 +0000 (17:35 -0500)]
staging: lustre: make lustre dependent on LNet
In the case of lustre routers you only need a functioning
LNet stack. Especially since often the routers are very
light weight and want to avoid any addition software that
would create additional pressures on the system.
Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A few errors exist for the Kconfig option LNET_MAX_PAYLOAD. First
mistake is the default size is 1MB not 2MB as it is shown to the
person configuring the kernel. Second the LNET_MAX_PAYLOAD option
is more closely related to LNET than the LUSTRE_FS option.
Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
James Simmons [Tue, 8 Mar 2016 22:35:26 +0000 (17:35 -0500)]
staging: lustre: move libcfs to lnet layer
The lustre file system has a layered architecture with
libcfs as the lowest layer and LNet layered on top. Then
on top of LNet we run the lustre client. This patch moves
the libcfs module code out of lustre into the lnet tree.
This fits into the long term goal of eventually merging
libcfs into LNet.
Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
James Simmons [Mon, 7 Mar 2016 23:10:24 +0000 (18:10 -0500)]
staging: lustre: make LNet use lprocfs_call_handler
Sometime ago a patch was submitted to duplicate the
proc_call_handler code in the LNet layer. This was
due to the thinking libcfs was not used by the LNet
layer. This was a wrong assumption so lets make LNet
use the lprocfs_call_handler from the libcfs layer.
Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
James Nunez [Mon, 7 Mar 2016 23:10:21 +0000 (18:10 -0500)]
staging: lustre: Correct missing newline
Several error messages are missing newline characters
at the end of the message. Newlines are added where
necessary and other minor corrections; no punctuation
at the end of an error message, add a return code to
the end of error messages, device name at the beginning,
etc.
There are just a couple of places where newlines are
removed and this is only in LDLM_DEBUG_NOLOCK. The definition
of LDLM_DEBUG_NOLOCK already has a newline in it and
resulted in double newlines printed.
Signed-off-by: James Nunez <james.a.nunez@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4871
Reviewed-on: http://review.whamcloud.com/10000 Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: John L. Hammond <john.hammond@intel.com> Reviewed-by: Cliff White <cliff.white@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: lustre: fix 'data race condition' issue in framework.c
Fix 'data race condition' defects found by Coverity version 6.5.0:
Data race condition (MISSING_LOCK)
Accessing variable without holding lock. Elsewhere,
this variable is accessed with lock held.
Signed-off-by: Sebastien Buisson <sbuisson@ddn.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2744
Reviewed-on: http://review.whamcloud.com/6568 Reviewed-by: Bob Glossman <bob.glossman@intel.com> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix 'NULL pointer dereference' defects found by Coverity version
6.5.3:
Dereference after null check (FORWARD_NULL)
For instance, Passing null pointer to a function which dereferences
it.
Dereference before null check (REVERSE_INULL)
Null-checking variable suggests that it may be null, but it has
already been dereferenced on all paths leading to the check.
Dereference null return value (NULL_RETURNS)
The following fixes for the LNet layer are broken out of patch
http://review.whamcloud.com/4720.
staging: lustre: fix 'data race condition' issue in conrpc.c
Fix 'data race condition' defects found by Coverity version 6.5.0:
Data race condition (MISSING_LOCK)
Accessing variable without holding lock. Elsewhere,
this variable is accessed with lock held.
Liang Zhen [Mon, 7 Mar 2016 23:10:16 +0000 (18:10 -0500)]
staging: lustre: LNet drop rule implementation
This is implementation of LNet Drop Rule, which can randomly drop
LNet messages at specified rate.
LNet Drop Rule can only be applied to receive side of message. User
can add drop_rule either on end point of cluster (client/server) or
on LNet routers.
Here are lctl command to control LNet Drop Rules:
- net_drop_add -s SRC_NID -d DEST_NID --rate VALUE
drop 1/@VALUE of messages from @SRC_NID to @DEST_NID
- net_drop_del -s SRC_NID -d DEST_NID
remove all drop rules from @SRC_NID to @DEST_NID
- net_drop_list
list all drop rules on current node
Examples:
- lctl net_drop_add -s *@o2ib0 -d 192.168.1.102@tcp 1000
add new drop rule, it will drop 1/1000 messages from network o2ib0
to 192.168.1.102@tcp
- lctl net_drop_add -s 10.8.6.123@o2ib1 -d * 500
add new drop rule, it will drop 1/500 messages from 10.8.6.123@o2ib1
to all nodes
Signed-off-by: Liang Zhen <liang.zhen@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5435
Reviewed-on: http://review.whamcloud.com/11314 Reviewed-by: Bobi Jam <bobijam@gmail.com> Reviewed-by: Amir Shehata <amir.shehata@intel.com> Reviewed-by: Johann Lombardi <johann.lombardi@intel.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Wed, 2 Mar 2016 19:06:46 +0000 (20:06 +0100)]
isdn: i4l: move active-isdn drivers to staging
The icn, act2000 and pcbit drivers are all for very old hardware,
and it is highly unlikely that anyone is actually still using them
on modern kernels, if at all.
All three drivers apparently are for hardware that predates PCI
being the common connector, as they are ISA-only and active
PCI ISDN cards were widely available in the 1990s.
Looking through the git logs, it I cannot find any indication of a
patch to any of these drivers that has been tested on real hardware,
only cleanups or global API changes.
Arnd Bergmann [Wed, 2 Mar 2016 19:06:45 +0000 (20:06 +0100)]
isdn: icn: remove a #warning
The icn driver currently produces an unconditional #warning whenever
we build it, introduced by Karsten Keil back in 2003:
#warning TODO test headroom or use skb->nb to flag ACK
Karsten's original commit (from BitKeeper) contains this description:
- here are lot of bugs left, so ISDN is not stable yet but
I think it's really time to fix it, even if it need some cycles
to get it right (normally I'm only send patches if it works 100% for
me).
- I add some additional #warnings to address places which need fixing
(I hope that some of the other ISDN developer jump in)
Apparently this has not happened, and it is unlikely that it ever will,
given that the driver doesn't seem to work. No substantial bug fixes
other than janitorial cleanups have happened in the driver since then,
and I see no indication that anyone who patched it had the hardware.
We should probably either remove the driver, or remove all of i4l,
but for now, this shuts up the distracting #warning by turning it
into a comment.
Ian Abbott [Wed, 2 Mar 2016 14:27:38 +0000 (14:27 +0000)]
staging: comedi: comedi.h: Fix comment for struct comedi_krange
The kernel-doc comment for `struct comedi_krange` refers to the macro
constant `RF_external`. It should be `RF_EXTERNAL`, so fix it. It also
documents the value of the constant as `(1 << 8)`, but the macro now
expands to the hexadecimal constant `0x100`, so use that as the
documented value.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 2 Mar 2016 14:27:37 +0000 (14:27 +0000)]
staging: comedi: comedi.h: Do not use BIT macro
The "comedi.h" file is part of the user API for COMEDI devices, and is
intended to be migrated to "include/uapi/linux". The `BIT` macro from
"include/linux/bitops.h" should not be used there.
Replace the use of the `BIT` macro with hexadecimal constants of the
same value. The `BIT` macro replaced expressions of the form `(1 << N)`
in this file originally, but reverting back to that form would encourage
patches changing them back to use the `BIT` macro.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bhumika Goyal [Sun, 28 Feb 2016 07:58:47 +0000 (13:28 +0530)]
Staging: comedi: s626.c: Remove unused functions
The functions s626_get_clk_mult, s626_get_clk_mult, s626_get_enc_mode,
s626_set_index_pol are not used anywhere in the kernel so they can be
removed. This also cleans the code. Grepped to find the occurences.
alloc_and_init_dma_members does not affect the interrupt status and is
only called by auto_attach, which also does not affect the interrupt
status. auto_attach() also contains a call to comedi_alloc_devpriv()
which calls kzalloc with GFP_KERNEL flag. Thus, there seems to be no
danger that dma_alloc_coherent can be called with interrupts turned
off, and GFP_KERNEL can be used.
projects / linux-beck.git / log