Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Alan Cox [Thu, 3 May 2012 14:06:18 +0000 (15:06 +0100)]
gma500: opregion and ACPI
Add the opregion support and bring us in line with the opregion functionality in the
reference driver code. We can't share this with i915 currently because there are
hardcoded assumptions about dev_priv etc in both versions.
[airlied: include opregion.h fix]
Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
gma500: mdfld_dsi_dpi_mode_set() do not corrupt DSPSTRIDE
The proper stride value set in mdfld__intel_pipe_set_base().
TODO: move tc35876x support to separate driver and get rid of all
if (mdfld_get_panel_type(dev, pipe) == TC35876X) { ... }
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Michel Dänzer [Wed, 2 May 2012 08:29:56 +0000 (10:29 +0200)]
drm/radeon: Original Radeons had PCI GART, not PCIe GART.
Just a cosmetic fix to make dmesg a little less confusing.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Christian König [Wed, 2 May 2012 13:11:25 +0000 (15:11 +0200)]
drm/radeon: remove cayman_gpu_is_lockup
Since it is now identical to evergreen_gpu_is_lockup.
Signed-off-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Christian König [Wed, 2 May 2012 13:11:24 +0000 (15:11 +0200)]
drm/radeon: remove r300_gpu_is_lockup
Since it is now identical to r100_gpu_is_lockup.
Signed-off-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Christian König [Wed, 2 May 2012 13:11:23 +0000 (15:11 +0200)]
drm/radeon: make forcing ring activity a common function
Nothing chipset or ring specific with it,
so also move it to radon_ring.
Signed-off-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Christian König [Wed, 2 May 2012 13:11:22 +0000 (15:11 +0200)]
drm/radeon: unlock the ring mutex while waiting for the next fence
Fixing just another deadlock problem with gpu reset tests.
Signed-off-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Christian König [Wed, 2 May 2012 13:11:21 +0000 (15:11 +0200)]
drm/radeon: make lockup timeout a module param
Don't hard code the 10 seconds timeout. Compute jobs
can run much longer.
Signed-off-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Christian König [Wed, 2 May 2012 13:11:20 +0000 (15:11 +0200)]
drm/radeon: move lockup detection code into radeon_ring.c
It isn't chipset specific, so it makes no sense
to have that inside r100.c.
Signed-off-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Christian König [Wed, 2 May 2012 13:11:19 +0000 (15:11 +0200)]
drm/radeon: rework recursive gpu reset handling
Instead of all this humpy pumpy with recursive
mutex (which also fixes only halve of the problem)
move the actual gpu reset out of the fence code,
return -EDEADLK and then reset the gpu in the
calling ioctl function.
v2: Split removal of radeon_mutex into separate patch.
Return -EAGAIN if reset is successful.
Signed-off-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Christian König [Wed, 2 May 2012 13:11:18 +0000 (15:11 +0200)]
drm/radeon: fix a bug with the ring syncing code
Rings need to lock in order, otherwise
the ring subsystem can deadlock.
v2: fix error handling and number of locked doublewords.
v3: stop creating unneeded semaphores.
Signed-off-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Christian König [Wed, 2 May 2012 13:11:17 +0000 (15:11 +0200)]
drm/radeon: don't keep list of created fences.
It's never used and so practically superfluous.
Signed-off-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Christian König [Wed, 2 May 2012 13:11:16 +0000 (15:11 +0200)]
drm/radeon: rename fence_wait_last to fence_wait_empty
As discussed with Michel that name better
describes the behavior of this function.
Signed-off-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Christian König [Wed, 2 May 2012 13:11:15 +0000 (15:11 +0200)]
drm/radeon: return -ENOENT in fence_wait_next v2
We should signal the caller that we haven't waited at all.
v2: only change fence_wait_next not fence_wait_last.
Signed-off-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Christian König [Wed, 2 May 2012 13:11:14 +0000 (15:11 +0200)]
drm/radeon: fix a bug in the SA code
Aligning offset can make it bigger than tmp->offset
leading to an overrun bug in the following subtraction.
v2: Against initial suspicions this can't happen in mainline,
so no need to push it into stable.
Signed-off-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Christian König [Wed, 2 May 2012 13:11:13 +0000 (15:11 +0200)]
drm/radeon: rework gpu lockup detection and processing
Previusly multiple rings could trigger multiple GPU
resets at the same time.
Signed-off-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Christian König [Wed, 2 May 2012 13:11:12 +0000 (15:11 +0200)]
drm/radeon: use central function for IB testing
Removing all the different error messages and
having just one standard behaviour over all
chipset generations.
Signed-off-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Christian König [Wed, 2 May 2012 13:11:11 +0000 (15:11 +0200)]
drm/radeon: register ring debugfs handlers on init
Just register the debugfs files on init instead of
checking the chipset type multiple times.
Signed-off-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Christian König [Wed, 2 May 2012 13:11:10 +0000 (15:11 +0200)]
drm/radeon: replace gpu_lockup with ring->ready flag
It makes no sense at all to have more than one flag.
Signed-off-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Christian König [Wed, 2 May 2012 13:11:09 +0000 (15:11 +0200)]
drm/radeon: make radeon_gpu_is_lockup a per ring function
Different rings have different criteria to test
if they are stuck.
v2: rebased on current drm-next
Signed-off-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Wed, 2 May 2012 08:21:50 +0000 (09:21 +0100)]
Merge tag 'drm-intel-next-2012-04-23' of git://people.freedesktop.org/~danvet/drm-intel into drm-core-next
Daniel Vetter writes:
A new drm-intel-next pull. Highlights:
- More gmbus patches from Daniel Kurtz, I think gmbus is now ready, all
known issues fixed.
- Fencing cleanup and pipelined fencing removal from Chris.
- rc6 residency interface from Ben, useful for powertop.
- Cleanups and code reorg around the ringbuffer code (Ben&me).
- Use hw semaphores in the pageflip code from Ben.
- More vlv stuff from Jesse, unfortunately his vlv cpu is doa, so less
merged than I've hoped for - we still have the unused function warning :(
- More hsw patches from Eugeni, again, not yet enabled fully.
- intel_pm.c refactoring from Eugeni.
- Ironlake sprite support from Chris.
- And various smaller improvements/fixes all over the place.
Note that this pull request also contains a backmerge of -rc3 to sort out
a few things in -next. I've also had to frob the shortlog a bit to exclude
anything that -rc3 brings in with this pull.
Regression wise we have a few strange bugs going on, but for all of them
closer inspection revealed that they've been pre-existing, just now
slightly more likely to be hit. And for most of them we have a patch
already. Otherwise QA has not reported any regressions, and I'm also not
aware of anything bad happening in 3.4.
* tag 'drm-intel-next-2012-04-23' of git://people.freedesktop.org/~danvet/drm-intel: (420 commits)
drm/i915: rc6 residency (fix the fix)
drm/i915/tv: fix open-coded ARRAY_SIZE.
drm/i915: invalidate render cache on gen2
drm/i915: Silence the change of LVDS sync polarity
drm/i915: add generic power management initialization
drm/i915: move clock gating functionality into intel_pm module
drm/i915: move emon functionality into intel_pm module
drm/i915: move drps, rps and rc6-related functions to intel_pm
drm/i915: fix line breaks in intel_pm
drm/i915: move watermarks settings into intel_pm module
drm/i915: move fbc-related functionality into intel_pm module
drm/i915: Refactor get_fence() to use the common fence writing routine
drm/i915: Refactor fence clearing to use the common fence writing routine
drm/i915: Refactor put_fence() to use the common fence writing routine
drm/i915: Prepare to consolidate fence writing
drm/i915: Remove the unsightly "optimisation" from flush_fence()
drm/i915: Simplify fence finding
drm/i915: Discard the unused obj->last_fenced_ring
drm/i915: Remove unused ring->setup_seqno
drm/i915: Remove fence pipelining
...
drm/radeon/kms/hdmi: use relative offsets, official regs
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Tested-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Christian König <deathsimple@vodafone.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
drm/radeon/kms: keep HDMI state in separated variable
If we want hdmi_offset to be relative to the first block, zero value can
be used also for enabled block.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Tested-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Christian König <deathsimple@vodafone.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
drm/radeon/kms: get rid of r600_hdmi_find_free_block
R6xx has routable blocks, but there's nothing wrong in assignment based
on dig_encoder. We didn't really need that algorithm.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Tested-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Christian König <deathsimple@vodafone.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Tested-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Christian König <deathsimple@vodafone.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
drm/radeon/kms: move audio params to separated struct
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Tested-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Christian König <deathsimple@vodafone.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
Alan Cox [Wed, 25 Apr 2012 13:38:47 +0000 (14:38 +0100)]
gma500: Set the mapping mask
Some boards such as the Intel D2700MUD allow you to have over 4GB of RAM.
The GTT on the PVR based devices is 32bit however. Hugh Dickins points out
that we should therefore be setting the mapping gfp mask.
This is not the whole fix for the problem. Some further shmem patches will
be needed to deal with the corner cases.
Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Alan Cox [Wed, 25 Apr 2012 13:38:07 +0000 (14:38 +0100)]
cdv: continue synching up with updated reference code
In particular clean up the errata handling and correct the crtc masks. We do
this a bit differently using our device abstraction for neatness.
This doesn't address the ACPI opregion and hotplug plumbing, nor the IRQ related
changes that will need. It touches on backlight init but the full backlight
support is not in this change set.
Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Alan Cox [Wed, 25 Apr 2012 13:37:40 +0000 (14:37 +0100)]
gma500: support 1080p
The problem in console mode is lack of linear memory. We can solve that by
dropping to 16bpp. The mode setting X server will allocate its own GEM
framebuffer in 32bpp and all will be well.
We could just do 16bpp anyway but that would be a regression on the lower
modes as many distributions don't yet ship the generic mode setting KMS
drivers.
Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Alan Cox [Wed, 25 Apr 2012 13:37:14 +0000 (14:37 +0100)]
gma500: intel_bios updates
Pull in various i915 bits that we will need to begin tackling the LVDS detect
and ACPI events. We try and drift towards the i915 version of the code with
the long term goal that at least some of it can one day be unified.
Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Alan Cox [Wed, 25 Apr 2012 13:36:34 +0000 (14:36 +0100)]
gma500: read the PLL bits
We need to pull more stuff from the VBT in order to configure the clocking
correctly in all cases. Add the relevant bits from the other CDV driver work.
Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Ian Pilcher [Sun, 22 Apr 2012 16:40:26 +0000 (11:40 -0500)]
drm: Store vendor IDs directly in the EDID quirk structure
EDID vendor IDs are always 3 characters long (4 with the terminating
0). It doesn't make any sense to have a (possibly 8-byte) pointer
to the ID string in the quirk structure.
Signed-off-by: Ian Pilcher <arequipeno@gmail.com> Reviewed-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Adam Jackson [Mon, 16 Apr 2012 14:40:08 +0000 (10:40 -0400)]
drm/edid: Try harder to fix up base EDID blocks
Requiring the first byte of the EDID base block header to be 0 means we
don't fix up as many transfer errors as we could. Instead have the
callers specify whether it's meant to be block 0 or not, and
conditionally run header fixup based on that.
Bugzilla: https://bugzilla.redhat.com/812890 Signed-off-by: Adam Jackson <ajax@redhat.com> Reviewed-by: Alex Deucher <alexdeucher@gmail.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Dave Airlie <airlied@redhat.com>
Matthew Garrett [Mon, 16 Apr 2012 20:26:05 +0000 (16:26 -0400)]
efifb: Implement vga_default_device() (v2)
EFI doesn't typically make use of the legacy VGA ROM, but it may still be
configured to pass that through to a given video device. This may lead to
an inaccurate choice of default video device. Add support to efifb to pick
out the correct active video device.
v2: fix if->ifdef
Signed-off-by: Matthew Garrett <mjg@redhat.com> Acked-by: hpa@zytor.com Cc: matt.fleming@intel.com Signed-off-by: Dave Airlie <airlied@redhat.com>
Matthew Garrett [Mon, 16 Apr 2012 20:26:04 +0000 (16:26 -0400)]
x86: Use vga_default_device() when determining whether an fb is primary
IORESOURCE_ROM_SHADOW is not necessarily an indication that the hardware
is the primary device. Add support for using the vgaarb functions and
fall back if nothing's set them.
Signed-off-by: Matthew Garrett <mjg@redhat.com> Cc: mingo@redhat.com Acked-by: hpa@zytor.com Signed-off-by: Dave Airlie <airlied@redhat.com>
Matthew Garrett [Mon, 16 Apr 2012 20:26:03 +0000 (16:26 -0400)]
vga-switcheroo: Use vga_default_device()
vga-switcheroo currently changes the default VGA device by fiddling with
the IORESOURCE_ROM_SHADOW flag on the device. This isn't strictly accurate,
since there's no guarantee that switching also changes the ROM decoding.
Switch over to using the vgaarb functions for this.
Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Matthew Garrett [Mon, 16 Apr 2012 20:26:02 +0000 (16:26 -0400)]
vgaarb: Add support for setting the default video device (v2)
The default VGA device is a somewhat fluid concept on platforms with
multiple GPUs. Add support for setting it so switching code can update
things appropriately, and make sure that the sysfs code returns the right
device if it's changed.
v2: Updated to fix builds when __ARCH_HAS_VGA_DEFAULT_DEVICE is false.
Signed-off-by: Matthew Garrett <mjg@redhat.com> Acked-by: H. Peter Anvin <hpa@zytor.com> Acked-by: benh@kernel.crashing.org Cc: airlied@redhat.com Signed-off-by: Dave Airlie <airlied@redhat.com>
drm/edid: Add packed attribute to new gtf2 and cvt structs
The new structs added in struct detailed_data_monitor_range must be
marked with packed attribute although the outer struct itself is
already marked as packed. Otherwise these 7-bytes structs may be
aligned, and give the wrong position and size for the data.
Signed-off-by: Takashi Iwai <tiwai@suse.de> Acked-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
HD panel (1366x768) found most commonly on laptops can't be represented
exactly in CVT/DMT expression, which leads to 1368x768 instead, because
1366 can't be divided by 8.
Add a hack to convert to 1366x768 manually as an exception.
Signed-off-by: Takashi Iwai <tiwai@suse.de> Acked-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Ben Widawsky [Fri, 20 Apr 2012 18:50:01 +0000 (11:50 -0700)]
drm/i915: rc6 residency (fix the fix)
Chris' fix for my 32b breakage was incorrect. do_div returns a
remainder. Go back to a divide macro which is more 32b friendly.
Tested on x86-64.
This has only been compile tested on 32b systems.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=48756 Cc: Chris Wilson <chris@chris-wilson.co.uk>
Sincere-apologies: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ben Widawsky <benjamin.widawsky@intel.com>
[danvet: fixup 32bit compile-fail.] Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Dave Airlie [Fri, 20 Apr 2012 12:13:54 +0000 (13:13 +0100)]
drm/i915/tv: fix open-coded ARRAY_SIZE.
Signed-off-by: Dave Airlie <airlied@redhat.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Adam Jackson [Fri, 13 Apr 2012 20:33:36 +0000 (16:33 -0400)]
drm/edid: Do drm_dmt_modes_for_range() for all range descriptor types
EDID 1.4 retcons the meaning of the "GTF feature" bit to mean "is
continuous frequency", and moves the set of supported timing formulas
into the range descriptor itself. In any event, the range descriptor
can act as a filter on the DMT list without regard to a specific timing
formula.
Signed-off-by: Adam Jackson <ajax@redhat.com> Tested-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Adam Jackson [Fri, 13 Apr 2012 20:33:31 +0000 (16:33 -0400)]
drm/edid: Allow drm_mode_find_dmt to hunt for reduced-blanking modes
It won't find any, yet. Fix up callers to match: standard mode codes
will look prefer r-b modes for a given size if present, EST3 mode codes
will look for exactly the r-b-ness mentioned in the mode code. This
might mean fewer modes matched for EST3 mode codes between now and when
the DMT mode list regrows the r-b modes, but practically speaking EST3
codes don't exist in the wild.
Signed-off-by: Adam Jackson <ajax@redhat.com> Tested-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Paulo Zanoni [Fri, 13 Apr 2012 19:31:39 +0000 (16:31 -0300)]
drm: add DRM_MODE_FLAG_DBLCLK to CEA modes requiring it
CEA modes 6, 7, 8, 9, 21, 22, 23, 24, 44, 45, 50, 51, 54, 55, 58 and 59
require sending pixel data 2 times. This doesn't mean the modes will
work yet, but now the drivers know they're different.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Paulo Zanoni [Fri, 13 Apr 2012 19:31:38 +0000 (16:31 -0300)]
drm: add the VIC number to the CEA EDID modes
The specification defines a VIC (Video Identification Code) for each
mode. When we're browsing drm_edid_modes.h, it really helps to have the
number available (otherwise we have to count...). These numbers are also
used in the EDID data (by the CEA-EXT extension block).
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
The CEA extension block has a field which describes which YCbCr modes are
supported by the device, use it to fill the drm_display_info color_formats
fields. Also the existence of a CEA extension block is used as indication
that the device supports RGB.
The code should obviously check the EDID feature field for EDID feature flags
and not the color_formats field of the drm_display_info struct. Also update the
color_formats field with new modes instead of overwriting the current mode.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Daniel Vetter [Thu, 19 Apr 2012 14:45:22 +0000 (16:45 +0200)]
drm/i915: invalidate render cache on gen2
It looks like we also need to flush the render cache when we just
invalidate it. This fixes a regression in i-g-t/gem_tiled_blits on my
i855gm. I guess the render cache there is virtually indexed, so we
need to clean it when changing gtt mappings.
we made the change in state verbose so that we could quickly spot any
regressions that made have also been introduced with it. As there do not
appear to have been any, remove the extra logging.
v2: Remove the no longer used variables.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
drm/i915: add generic power management initialization
This adds intel_pm routine for generic power-related infrastructure
initialization.
v2: now that all the platform-specific stuff is initialized in one place, we
can also add back the static definitions to platform-specific functions which
we abstract now.
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Acked-by: Ben Widawsky <benjamin.widawsky@intel.com> Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
drm/i915: move clock gating functionality into intel_pm module
This moves the clock gating-related functions into intel_pm module.
Also, please note that we do change the function type from static to
non-static in this patch for the move, to prevent breaking bisecting with
non-working intermediate commit. Those are returned back to static form in
the following patch which setups a generic PM initialization function,
which was split into a different one to simplify review.
v2: rebase on top of latest drm-intel-next-queued to incorporate all the
changes that went there meanwhile.
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Acked-by: Ben Widawsky <benjamin.widawsky@intel.com> Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
projects / linux-beck.git / log