* freezer:
af_unix: use freezable blocking calls in read
sigtimedwait: use freezable blocking call
nanosleep: use freezable blocking call
futex: use freezable blocking call
select: use freezable blocking call
epoll: use freezable blocking call
binder: use freezable blocking calls
freezer: add new freezable helpers using freezer_do_not_count()
freezer: convert freezable helpers to static inline where possible
freezer: convert freezable helpers to freezer_do_not_count()
freezer: skip waking up tasks with PF_FREEZER_SKIP set
freezer: shorten freezer sleep time using exponential backoff
lockdep: check that no locks held at freeze time
lockdep: remove task argument from debug_check_no_locks_held
freezer: add unsafe versions of freezable helpers for CIFS
freezer: add unsafe versions of freezable helpers for NFS
* acpi-assorted:
ACPI / EC: Add HP Folio 13 to ec_dmi_table in order to skip DSDT scan
ACPI: Add CMOS RTC Operation Region handler support
ACPI: Remove unused flags in acpi_device_flags
ACPI: Remove useless initializers
ACPI / battery: Make sure all spaces are in correct places
ACPI: add _STA evaluation at do_acpi_find_child()
ACPI / EC: access user space with get_user()/put_user()
Lan Tianyu [Wed, 5 Jun 2013 02:27:51 +0000 (02:27 +0000)]
ACPI / EC: Add HP Folio 13 to ec_dmi_table in order to skip DSDT scan
HP Folio 13's BIOS defines CMOS RTC Operation Region and the EC's
_REG method will access that region. To allow the CMOS RTC region
handler to be installed before the EC _REG method is first invoked,
add ec_skip_dsdt_scan() as HP Folio 13's callback to ec_dmi_table.
References: https://bugzilla.kernel.org/show_bug.cgi?id=54621 Reported-and-tested-by: Stefan Nagy <public@stefan-nagy.at> Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Cc: 3.9+ <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Lan Tianyu [Wed, 5 Jun 2013 02:27:50 +0000 (02:27 +0000)]
ACPI: Add CMOS RTC Operation Region handler support
On HP Folio 13-2000, the BIOS defines a CMOS RTC Operation Region and
the EC's _REG methord accesses that region. Thus an appropriate
address space handler must be registered for that region before the
EC driver is loaded.
Introduce a mechanism for adding CMOS RTC address space handlers.
Register an ACPI scan handler for CMOS RTC devices such that, when
a device of that kind is detected during an ACPI namespace scan, a
common CMOS RTC operation region address space handler will be
installed for it.
References: https://bugzilla.kernel.org/show_bug.cgi?id=54621 Reported-and-tested-by: Stefan Nagy <public@stefan-nagy.at> Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Cc: 3.9+ <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Dave Chinner [Thu, 27 Jun 2013 06:04:56 +0000 (16:04 +1000)]
xfs: Use inode create transaction
Replace the use of buffer based logging of inode initialisation,
uses the new logical form to describe the range to be initialised
in recovery. We continue to "log" the inode buffers to push them
into the AIL and ensure that the inode create transaction is not
removed from the log before the inode buffers are written to disk.
Update the transaction identifier and reservations to match the
changed implementation.
Signed-off-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
Dave Chinner [Thu, 27 Jun 2013 06:04:55 +0000 (16:04 +1000)]
xfs: Inode create item recovery
When we find a icreate transaction, we need to get and initialise
the buffers in the range that has been passed. Extract and verify
the information in the item record, then loop over the range
initialising and issuing the buffer writes delayed.
Support an arbitrary size range to initialise so that in
future when we allocate inodes in much larger chunks all kernels
that understand this transaction can still recover them.
Signed-off-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
Dave Chinner [Thu, 27 Jun 2013 06:04:54 +0000 (16:04 +1000)]
xfs: Inode create transaction reservations
Define the log and space transaction sizes. Factor the current
create log reservation macro into the two logical halves and reuse
one half for the new icreate transactions. The icreate transaction
is transparent to all the high level create code - the
pre-calculated reservations will correctly set the reservations
dependent on whether the filesystem supports the icreate
transaction.
Signed-off-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
Dave Chinner [Thu, 27 Jun 2013 06:04:53 +0000 (16:04 +1000)]
xfs: Inode create log items
Introduce the inode create log item type for logical inode create logging.
Instead of logging the changes in buffers, pass the range to be
initialised through the log by a new transaction type. This reduces
the amount of log space required to record initialisation during
allocation from about 128 bytes per inode to a small fixed amount
per inode extent to be initialised.
This requires a new log item type to track it through the log
and the AIL. This is a relatively simple item - most callbacks are
noops as this item has the same life cycle as the transaction.
Signed-off-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
Dave Chinner [Thu, 27 Jun 2013 06:04:52 +0000 (16:04 +1000)]
xfs: Introduce an ordered buffer item
If we have a buffer that we have modified but we do not wish to
physically log in a transaction (e.g. we've logged a logical
change), we still need to ensure that transactional integrity is
maintained. Hence we must not move the tail of the log past the
transaction that the buffer is associated with before the buffer is
written to disk.
This means these special buffers still need to be included in the
transaction and added to the AIL just like a normal buffer, but we
do not want the modifications to the buffer written into the
transaction. IOWs, what we want is an "ordered buffer" that
maintains the same transactional life cycle as a physically logged
buffer, just without the transcribing of the modifications to the
log.
Hence we need to flag the buffer as an "ordered buffer" to avoid
including it in vector size calculations or formatting during the
transaction. Once the transaction is committed, the buffer appears
for all intents to be the same as a physically logged buffer as it
transitions through the log and AIL.
Relogging will also work just fine for such an ordered buffer - the
logical transaction will be replayed before the subsequent
modifications that relog the buffer, so everything will be
reconstructed correctly by recovery.
Signed-off-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
Dave Chinner [Thu, 27 Jun 2013 06:04:51 +0000 (16:04 +1000)]
xfs: Introduce ordered log vector support
And "ordered log vector" is a log vector that is used for
tracking a log item through the CIL and into the AIL as part of the
log checkpointing. These ordered log vectors are special in that
they are not written to to journal in any way, and are not accounted
to the checkpoint being written.
The reason for this behaviour is to allow operations to attach items
to transactions and have them follow the normal transactional
lifecycle without actually having to write them to the journal. This
allows logging of items that track high level logical changes and
writing them to the log, while the physical items being modified
pass through into the AIL and pin the tail of the log (and therefore
the logical item in the log) until all the modified items are
physically written to disk.
IOWs, it allows us to write metadata without physically logging
every individual change but still maintain the full transactional
integrity guarantees we currently have w.r.t. crash recovery.
This change modifies some of the CIL item insertion loops, as
ordered log vectors introduce some new constraints as they don't
track any data. One advantage of this change is that it combines
two log vector chain walks into a single pass, so there is less
overhead in the transaction commit pass as well. It also kills some
unused code in the log vector walk loop when committing the CIL.
Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
Dave Chinner [Thu, 27 Jun 2013 06:04:50 +0000 (16:04 +1000)]
xfs: xfs_ifree doesn't need to modify the inode buffer
Long ago, bulkstat used to read inodes directly from the backing
buffer for speed. This had the unfortunate problem of being cache
incoherent with unlinks, and so xfs_ifree() had to mark the inode
as free directly in the backing buffer. bulkstat was changed some
time ago to use inode cache coherent lookups, and so will never see
unlinked inodes in it's lookups. Hence xfs_ifree() does not need to
touch the inode backing buffer anymore.
Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
Dave Chinner [Thu, 27 Jun 2013 06:04:49 +0000 (16:04 +1000)]
xfs: don't do IO when creating an new inode
When we are allocating a new inode, we read the inode cluster off
disk to increment the generation number. We are already using a
random generation number for newly allocated inodes, so if we are not
using the ikeep mode, we can just generate a new generation number
when we initialise the newly allocated inode.
This avoids the need for reading the inode buffer during inode
creation. This will speed up allocation of inodes in cold, partially
allocated clusters as they will no longer need to be read from disk
during allocation. It will also reduce the CPU overhead of inode
allocation by not having the process the buffer read, even on cache
hits.
Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
Dave Chinner [Thu, 27 Jun 2013 06:04:48 +0000 (16:04 +1000)]
xfs: don't use speculative prealloc for small files
Dedicated small file workloads have been seeing significant free
space fragmentation causing premature inode allocation failure
when large inode sizes are in use. A particular test case showed
that a workload that runs to a real ENOSPC on 256 byte inodes would
fail inode allocation with ENOSPC about about 80% full with 512 byte
inodes, and at about 50% full with 1024 byte inodes.
The same workload, when run with -o allocsize=4096 on 1024 byte
inodes would run to being 100% full before giving ENOSPC. That is,
no freespace fragmentation at all.
The issue was caused by the specific IO pattern the application had
- the framework it was using did not support direct IO, and so it
was emulating it by using fadvise(DONT_NEED). The result was that
the data was getting written back before the speculative prealloc
had been trimmed from memory by the close(), and so small single
block files were being allocated with 2 blocks, and then having one
truncated away. The result was lots of small 4k free space extents,
and hence each new 8k allocation would take another 8k from
contiguous free space and turn it into 4k of allocated space and 4k
of free space.
Hence inode allocation, which requires contiguous, aligned
allocation of 16k (256 byte inodes), 32k (512 byte inodes) or 64k
(1024 byte inodes) can fail to find sufficiently large freespace and
hence fail while there is still lots of free space available.
There's a simple fix for this, and one that has precendence in the
allocator code already - don't do speculative allocation unless the
size of the file is larger than a certain size. In this case, that
size is the minimum default preallocation size:
mp->m_writeio_blocks. And to keep with the concept of being nice to
people when the files are still relatively small, cap the prealloc
to mp->m_writeio_blocks until the file goes over a stripe unit is
size, at which point we'll fall back to the current behaviour based
on the last extent size.
This will effectively turn off speculative prealloc for very small
files, keep preallocation low for small files, and behave as it
currently does for any file larger than a stripe unit. This
completely avoids the freespace fragmentation problem this
particular IO pattern was causing.
Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
Dave Chinner [Thu, 27 Jun 2013 06:04:47 +0000 (16:04 +1000)]
xfs: plug directory buffer readahead
Similar to bulkstat inode chunk readahead, we need to plug directory
data buffer readahead during getdents to ensure that we can merge
adjacent readahead requests and sort out of order requests optimally
before they are dispatched. This improves the readahead efficiency
and reduces the IO load it generates as the IO patterns are
significantly better for both contiguous and fragmented directories.
Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
Dave Chinner [Thu, 27 Jun 2013 06:04:46 +0000 (16:04 +1000)]
xfs: add pluging for bulkstat readahead
I was running some tests on bulkstat on CRC enabled filesystems when
I noticed that all the IO being issued was 8k in size, regardless of
the fact taht we are issuing sequential 8k buffers for inodes
clusters. The IO size should be 16k for 256 byte inodes, and 32k for
512 byte inodes, but this wasn't happening.
blktrace showed that there was an explict plug and unplug happening
around each readahead IO from _xfs_buf_ioapply, and the unplug was
causing the IO to be issued immediately. Hence no opportunity was
being given to the elevator to merge adjacent readahead requests and
dispatch them as a single IO.
Add plugging around the inode chunk readahead dispatch loop in
bulkstat to ensure that we don't unplug the queue between adjacent
inode buffer readahead IOs and so we get fewer, larger IO requests
hitting the storage subsystem for bulkstat.
Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
Bob Peterson [Thu, 27 Jun 2013 16:47:51 +0000 (12:47 -0400)]
GFS2: Reserve journal space for quota change in do_grow
If a GFS2 file system is mounted with quotas and a file is grown
in such a way that its free blocks for the allocation are represented
in a secondary bitmap, GFS2 ran out of blocks in the transaction.
That resulted in "fatal: assertion "tr->tr_num_buf <= tr->tr_blocks".
This patch reserves extra blocks for the quota change so the
transaction has enough space.
Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Kevin Cernekee [Tue, 18 Jun 2013 08:34:31 +0000 (08:34 +0000)]
MIPS: BCM63xx: Add SMP support to prom.c
This involves two changes to the BSP code:
1) register_smp_ops() for BMIPS SMP
2) The CPU1 boot vector on some of the BCM63xx platforms conflicts with
the special interrupt vector (IV). Move it to 0x8000_0380 at boot time,
to resolve the conflict.
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
[jogo@openwrt.org: moved SMP ops registration into ifdef guard,
changed ifdef guards to if (IS_ENABLED())] Signed-off-by: Jonas Gorski <jogo@openwrt.org> Cc: linux-mips@linux-mips.org Cc: John Crispin <blogic@openwrt.org> Cc: Maxime Bizon <mbizon@freebox.fr> Cc: Florian Fainelli <florian@openwrt.org>
Patchwork: https://patchwork.linux-mips.org/patch/5489/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Florian Fainelli [Fri, 31 May 2013 13:07:44 +0000 (13:07 +0000)]
MIPS: define write{b,w,l,q}_relaxed
MIPS does define read{b,w,l,q}_relaxed but does not define their write
counterparts: write{b,w,l,q}_relaxed. This patch adds the missing
definitions for the write*_relaxed I/O accessors.
The GENERIC_PCI_IOMAP does not depend on CONFIG_PCI so move
it to the CONFIG_MIPS symbol so it's always selected for MIPS.
This fixes the missing pci_iomap declaration for MIPS.
Moreover, the pci_iounmap function was not defined in the
io.h header file if the CONFIG_PCI symbol is not set,
but it should since MIPS is not using CONFIG_GENERIC_IOMAP.
This fixes the following problem on a allyesconfig:
drivers/net/ethernet/3com/3c59x.c:1031:2: error: implicit declaration of
function 'pci_iomap' [-Werror=implicit-function-declaration]
drivers/net/ethernet/3com/3c59x.c:1044:3: error: implicit declaration of
function 'pci_iounmap' [-Werror=implicit-function-declaration]
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Acked-by: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5478/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
James Hogan [Mon, 24 Jun 2013 10:12:38 +0000 (11:12 +0100)]
metag: don't check for cache aliasing on smp cpu boot
The cache configuration of the boot cpu is now duplicated to secondary
cpus, so there's no need to check for cache aliasing again when a
secondary cpu is booted. Therefore remove the check from
secondary_start_kernel().
Signed-off-by: James Hogan <james.hogan@imgtec.com>
James Hogan [Mon, 24 Jun 2013 10:05:19 +0000 (11:05 +0100)]
metag: panic if cache aliasing possible
If the cache and page size configuration allows for cache aliasing to
occur we warn on boot, but the log messages are easy to miss and will
result is random crashes occuring in userland. Let's panic too in this
case so that the user immediately knows they need to fix the cache
configuration or configured page size.
Also fix the warning messages which display the cache and page sizes to
include newlines, and add the word "Potential" since an actual cache
alias hasn't been detected.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
James Hogan [Fri, 31 May 2013 15:12:54 +0000 (16:12 +0100)]
metag: *.dts: include using preprocessor
Include *.dtsi files from *.dts using the preprocessor to set a good
example for future device tree files. Files included in the old way
don't get pre-processed.
Signed-off-by: James Hogan <james.hogan@imgtec.com> Acked-by: Grant Likely <grant.likely@linaro.org> Cc: devicetree-discuss@lists.ozlabs.org
James Hogan [Fri, 31 May 2013 15:17:24 +0000 (16:17 +0100)]
metag: add <dt-bindings/> symlink
Add symlink to include/dt-bindings from arch/metag/boot/dts/include/ to
match the one in arch/arm/... (see the commit below) so that
preprocessed device tree files can include various useful constant
definitions.
Signed-off-by: James Hogan <james.hogan@imgtec.com> Acked-by: Grant Likely <grant.likely@linaro.org> Reviewed-by: Stephen Warren <swarren@nvidia.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Rob Herring <rob.herring@calxeda.com> Cc: linux-kbuild@vger.kernel.org Cc: devicetree-discuss@lists.ozlabs.org
Leonid Yegoshin [Thu, 20 Jun 2013 14:36:42 +0000 (14:36 +0000)]
MIPS: Malta: Update GCMP detection.
Add GCMP detection for IASim Marvell chip emulation support.
Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Acked-by: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Patchwork: https://patchwork.linux-mips.org/patch/5529/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Leonid Yegoshin [Thu, 20 Jun 2013 14:36:30 +0000 (14:36 +0000)]
Revert "MIPS: make CAC_ADDR and UNCAC_ADDR account for PHYS_OFFSET"
This reverts commit 3f4579252aa166641861a64f1c2883365ca126c2. It is
invalid because the macros CAC_ADDR and UNCAC_ADDR have a kernel
virtual address as an argument and also returns a kernel virtual
address. Using and physical address PHYS_OFFSET is blatantly wrong
for a macro common to multiple platforms.
Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Acked-by: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Florian Fainelli <florian@openwrt.org>
Patchwork: https://patchwork.linux-mips.org/patch/5528/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Markos Chandras [Mon, 17 Jun 2013 13:00:40 +0000 (13:00 +0000)]
SSB: Kconfig: Amend SSB_EMBEDDED dependencies
SSB_EMBEDDED needs functions from driver_pcicore which are only
available if SSD_DRIVER_HOSTMODE is selected so make it
depend on that symbol.
Fixes the following linking problem:
drivers/ssb/embedded.c:202:
undefined reference to `ssb_pcicore_plat_dev_init'
drivers/built-in.o: In function `ssb_pcibios_map_irq':
drivers/ssb/embedded.c:247:
undefined reference to `ssb_pcicore_pcibios_map_irq'
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Acked-by: Steven J. Hill <Steven.Hill@imgtec.com> Cc: sibyte-users@bitmover.com Cc: netdev@vger.kernel.org Cc: Michael Buesch <m@bues.ch> Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5484/ Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Steven J. Hill [Wed, 5 Jun 2013 21:25:17 +0000 (21:25 +0000)]
MIPS: microMIPS: Fix improper definition of ISA exception bit.
The ISA exception bit selects whether exceptions are taken in classic
or microMIPS mode. This bit is Config3.ISAOnExc and was improperly
defined as bits 16 and 17 instead of just bit 16. A new function was
added so that platforms could set this bit when running a kernel
compiled with only microMIPS instructions.
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5377/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
David Daney [Fri, 24 May 2013 20:54:09 +0000 (20:54 +0000)]
MIPS: Don't try to decode microMIPS branch instructions where they cannot exist.
In mm_isBranchInstr() we can short circuit the entire function if
!cpu_has_mmips.
Signed-off-by: David Daney <david.daney@cavium.com> Acked-by: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5326/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
David Daney [Fri, 24 May 2013 20:54:08 +0000 (20:54 +0000)]
MIPS: Declare emulate_load_store_microMIPS as a static function.
It is only used from within a single file, it should not be globally
visible.
Signed-off-by: David Daney <david.daney@cavium.com> Acked-by: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5325/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
David Herrmann [Sat, 15 Jun 2013 13:32:45 +0000 (15:32 +0200)]
HID: wiimote: support Nintendo Wii U Pro Controller
The Wii U Pro Controller is a new Nintendo remote device that looks very
similar to the XBox controller. It has nearly the same features and uses
the same protocol as the Wii Remote.
We add a new wiimote extension device so the Pro Controller is properly
detected and supported.
The device reports MP support, which is odd and I couldn't get it working,
yet. Hence, we disable MP registers for now. Further investigation is
needed to see what extra capabilities are provided.
There are some other unknown bits in the extension reports that I couldn't
figure out what they do. You can use hidraw to access these if you're
interested.
We might want to hook up the "charging" and "USB" bits to the battery
device so user-space can query whether it is currently charged via USB.
Jiri Kosina [Thu, 27 Jun 2013 09:54:51 +0000 (11:54 +0200)]
Input: make gamepad API keycodes more clear
Shuffle the defines around so that it is clear that BTN_A, BTN_B, etc are
legacy definitions and not an accidental typos that need their own key codes.
projects / karo-tx-linux.git / log