To fasten the process of firmware download, the chip allows
disabling of the command complete event generation from host.
In these cases, only few very essential commands would have
the command complete events and hence the wait associated with
them.
So now the driver would wait for a command complete event, only
when it comes across a wait event during firmware parsing.
This would also mean we need to skip not just the change baud
rate command but also the wait for it.
Pavan Savoy [Fri, 4 Feb 2011 08:23:12 +0000 (02:23 -0600)]
drivers:misc: ti-st: set right debug levels for logs
pr_debug-ing few pr_infos from the data paths such as tty receive and
write so as to reduce debugs when we have higher logging levels enabled
undef VERBOSE in receive to avoid huge logs when log level 8 is set.
Pavan Savoy [Fri, 4 Feb 2011 08:23:11 +0000 (02:23 -0600)]
drivers:misc: ti-st: fix error codes
set-right the error codes that the shared transport driver
returns.
Instead of magic numbers like -1, return relevant codes such as
ETIMEDOUT or EIO, EAGAIN when wait times out or uart write bytes don't
match expected value or when registration fails and needs to be
attempted again.
Pavan Savoy [Fri, 4 Feb 2011 08:23:10 +0000 (02:23 -0600)]
drivers:misc: ti-st: move from rfkill to sysfs
The communication between ST KIM and UIM was interfaced
over the /dev/rfkill device node.
Move the interface to a simpler less abusive sysfs entry
mechanism and document it in Documentation/ABI/testing/
under sysfs-platform-kim.
Shared transport driver would now read the UART details
originally received by bootloader or firmware as platform
data.
The data read will be shared over sysfs entries for the user-space
UIM or other n/w manager/plugins to be read, and assist the driver
by opening up the UART, setting the baud-rate and installing the
line discipline.
Pavan Savoy [Fri, 4 Feb 2011 08:23:09 +0000 (02:23 -0600)]
drivers:misc: ti-st: register with channel IDs
The architecture of shared transport had begun with individual
protocols like bluetooth, fm and gps telling the shared transport
what sort of protocol they are and then expecting the ST driver
to parse the incoming data from chip and forward data only
relevant to the protocol drivers.
This change would mean each protocol drivers would also send
information to ST driver as to how to intrepret their protocol
data coming out of the chip.
Harry Wei [Fri, 4 Feb 2011 15:59:39 +0000 (23:59 +0800)]
Fix a mistake Chinese character in Documentation/zh_CN/SubmittingPatches
When i see the file linux-2.6.37/Documentation/zh_CN/SubmittingPatches ,
i find a mistake Chinese character in it. So i give a patch for
correcting this error.
Signed-off-by: Harry Wei <harryxiyou@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Ferenc Wagner [Fri, 7 Jan 2011 14:17:47 +0000 (15:17 +0100)]
driver core: Replace the dangerous to_root_device macro with an inline function
The original macro worked only when applied to variables named 'dev'.
While this could have been fixed by simply renaming the macro argument,
a more type-safe replacement by an inline function is preferred.
Signed-off-by: Ferenc Wagner <wferi@niif.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Nathan Fontenot [Mon, 31 Jan 2011 16:55:23 +0000 (10:55 -0600)]
memory hotplug: sysfs probe routine should add all memory sections
As a follow-on to the recent patches I submitted that allowed for a sysfs
memory block to span multiple memory sections, we should also update the
probe routine to online all of the memory sections in a memory block. Without
this patch the current code will only add a single memory section. I think
the probe routine should add all of the memory sections in the specified memory
block so that its behavior is in line with memory hotplug actions through
the sysfs interfaces.
This patch applies on top of the previous sysfs memory updates to allow
a sysfs directory o span multiple memory sections.
Nathan Fontenot [Thu, 20 Jan 2011 16:44:29 +0000 (10:44 -0600)]
memory hotplug: Update phys_index to [start|end]_section_nr
Update the 'phys_index' property of a the memory_block struct to be
called start_section_nr, and add a end_section_nr property. The
data tracked here is the same but the updated naming is more in line
with what is stored here, namely the first and last section number
that the memory block spans.
The names presented to userspace remain the same, phys_index for
start_section_nr and end_phys_index for end_section_nr, to avoid breaking
anything in userspace.
This also updates the node sysfs code to be aware of the new capability for
a memory block to contain multiple memory sections and be aware of the memory
block structure name changes (start_section_nr). This requires an additional
parameter to unregister_mem_sect_under_nodes so that we know which memory
section of the memory block to unregister.
Nathan Fontenot [Thu, 20 Jan 2011 16:43:34 +0000 (10:43 -0600)]
memory hotplug: Allow memory blocks to span multiple memory sections
Update the memory sysfs code such that each sysfs memory directory is now
considered a memory block that can span multiple memory sections per
memory block. The default size of each memory block is SECTION_SIZE_BITS
to maintain the current behavior of having a single memory section per
memory block (i.e. one sysfs directory per memory section).
For architectures that want to have memory blocks span multiple
memory sections they need only define their own memory_block_size_bytes()
routine.
Update the memory hotplug documentation to reflect the new behaviors of
memory blocks reflected in sysfs.
Tomoya MORINAGA [Wed, 22 Dec 2010 12:04:11 +0000 (21:04 +0900)]
pch_phub: add new device ML7213
Add ML7213 device information.
ML7213 is companion chip of Intel Atom E6xx series for IVI(In-Vehicle Infotainment).
ML7213 is completely compatible for Intel EG20T PCH.
Borislav Petkov [Tue, 1 Feb 2011 16:19:56 +0000 (17:19 +0100)]
sysdev: Do not register with sysdev when erroring on add
When encountering an error while executing the driver's ->add method, we
should cancel registration and unwind what we've regged so far. The low
level ->add methods do return proper error codes but those aren't looked
at in sysdev_driver_register(). Fix that by sharing the unregistering
code.
Bart Van Assche [Sun, 23 Jan 2011 16:17:24 +0000 (17:17 +0100)]
Dynamic debug: Add more flags
Add flags that allow the user to specify via debugfs whether or not the
module name, function name, line number and/or thread ID have to be
included in the printed message.
Signed-off-by: Bart Van Assche <bvanassche@acm.org> Cc: Greg Banks <gnb@fmeh.org> Cc: Konrad Rzeszutek Wilk <konrad@darnok.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Bart Van Assche [Sat, 1 Jan 2011 12:51:52 +0000 (13:51 +0100)]
kobject: Add missing format attribute specifications
Several functions in <linux/kobject.h> accept printf-style arguments.
Some of these functions have been annotated with a format attribute
declaration while others have not been annotated. Add a format attribute
specification where it is missing.
Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Bart Van Assche [Tue, 21 Dec 2010 12:09:47 +0000 (13:09 +0100)]
docs/sysfs: show() methods should use scnprintf().
Since snprintf() may return a value that exceeds its second argument,
show() methods should use scnprintf() instead of snprintf(). This patch
updates the example in the sysfs documentation accordingly.
Some time ago the way how sysfs stores a pointer to a kobject
corresponding to a directory was modified. This patch brings the
documentation again in sync with the implementation.
Linus Torvalds [Mon, 31 Jan 2011 22:27:55 +0000 (08:27 +1000)]
Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6
* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6:
arch/arm/mach-omap2/dma.c: Convert IS_ERR result to PTR_ERR
arm: omap2: mux: fix compile warning
omap1: Simplify use of omap_irq_flags
omap2+: Fix unused variable warning for omap_irq_base
Randy Dunlap [Mon, 31 Jan 2011 17:29:14 +0000 (09:29 -0800)]
kernel.h: fix kernel-doc warning
Fix kernel-doc warning in kernel.h from commit 7ef88ad56145
("BUILD_BUG_ON: make it handle more cases"):
Warning(include/linux/kernel.h:605): No description found for parameter 'condition'
Warning(include/linux/kernel.h:605): Excess function parameter 'cond' description in 'BUILD_BUG_ON'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patches should keep coming through Rusty but it helps if I'm Cc'd as
well.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Mon, 31 Jan 2011 22:07:40 +0000 (08:07 +1000)]
Merge branch 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
* 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (42 commits)
usb: gadget: composite: avoid access beyond array max length
USB: serial: handle Data Carrier Detect changes
USB: gadget: Fix endpoint representation in ci13xxx_udc
USB: gadget: Fix error path in ci13xxx_udc gadget probe function
usb: pch_udc: Fix the worning log issue at gadget driver remove
USB: serial: Updated support for ICOM devices
USB: ehci-mxc: add work-around for efika mx/sb bug
USB: unbreak ehci-mxc on otg port of i.MX27
drivers: update to pl2303 usb-serial to support Motorola cables
USB: adding USB support for Cinterion's HC2x, EU3 and PH8 products
USB serial: add missing .usb_driver field in serial drivers
USB: ehci-fsl: Fix 'have_sysif_regs' detection
USB: g_printer: fix bug in module parameter definitions
USB: g_printer: fix bug in unregistration
USB: uss720: remove duplicate USB device
MAINTAINERS: add ueagle-atm entry
USB: EHCI: fix DMA deallocation bug
USB: pch_udc: support new device ML7213 IOH
usb: pch_udc: Fixed issue which does not work with g_serial
usb: set ep_dev async suspend should be later than device_initialize
...
Linus Torvalds [Mon, 31 Jan 2011 22:06:31 +0000 (08:06 +1000)]
Merge branch 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6
* 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (26 commits)
staging: r8712u: Add new device IDs
staging: brcm80211: fix suspend/resume issue in brcmsmac
staging: brcm80211: remove assert to avoid panic since 2.6.37 kernel
Staging: iio: Aditional fixpoint formatted output bugfix
staging: usbip: vhci: use urb->dev->portnum to find port
staging: usbip: vhci: handle EAGAIN from SO_RCVTIMEO
staging: usbip: vhci: friendly log messages for connection errors
staging: usbip: vhci: refuse to enqueue for dead connections
staging: usbip: vhci: give back URBs from in-flight unlink requests
staging: usbip: vhci: update reference count for usb_device
staging: usbip: stub: update refcounts for devices and interfaces
staging: tidspbridge: replace mbox callback with notifier_call
staging: comedi: ni_labpc: Use shared IRQ for PCMCIA card
Staging: speakup: &&/|| confusion in silent_store()
iio: Fixpoint formatted output bugfix
staging: rt2860: Fix incorrect netif_stop_queue usage warning
staging: r8712u: Fix memory leak in firmware loading
staging: tidspbridge: configure full L1 MMU range
staging: rt2870sta: Add ID for Linksys WUSB100v2
Staging: xgfib: put parenthesis in the right place
...
Linus Torvalds [Mon, 31 Jan 2011 22:05:19 +0000 (08:05 +1000)]
Merge branch 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6
* 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6:
tty/serial: fix apbuart build
n_hdlc: fix read and write locking
serial: unbreak billionton CF card
tty: use for_each_console() and WARN() on sysfs failures
vt: fix issue when fbcon wants to takeover a second time.
Russell King [Sun, 30 Jan 2011 16:40:20 +0000 (16:40 +0000)]
ARM: smp_on_up: allow non-ARM SMP processors
Allow non-ARM SMP processors to use the SMP_ON_UP feature. CPUs
supporting SMP must have the new CPU ID format, so check for this first.
Then check for ARM11MPCore, which fails the MPIDR check. Lastly check
the MPIDR reports multiprocessing extensions and that the CPU is part of
a multiprocessing system.
Cc: <stable@kernel.org> Reported-and-Tested-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Sun, 30 Jan 2011 11:29:40 +0000 (11:29 +0000)]
ARM: io: ensure inb/outb() et.al. are properly ordered on ARMv6+
Ensure that the ISA/PCI IO space accessors are properly ordered on
ARMv6+ architectures. These should always be ordered with respect to
all other accesses.
This also fixes __iormb() and __iowmb() not being visible to ioread/
iowrite if a platform defines its own MMIO accessors.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Sun, 30 Jan 2011 11:21:05 +0000 (11:21 +0000)]
ARM: initrd: disable initrd if passed address overlaps reserved region
Disable the initrd if the passed address already overlaps the reserved
region. This avoids oopses on Netwinders when NeTTrom tells the kernel
that an initrd is located at mem+4MB, but this overlaps the BSS,
resulting in the kernels in-use BSS being freed.
This should be applied to v2.6.37-stable.
Cc: <stable@kernel.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Fri, 28 Jan 2011 20:57:57 +0000 (20:57 +0000)]
ARM: footbridge: fix debug macros
0ea1293 (arm: return both physical and virtual addresses from addruart)
changed the way the 'addruart' worked, making it return both the virt
and phys addresses. Unfortunately, for footbridge, these were reversed.
Fix that. Tested on Netwinder.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Kacper Kornet [Fri, 28 Jan 2011 23:21:04 +0000 (00:21 +0100)]
Fix prlimit64 for suid/sgid processes
Since check_prlimit_permission always fails in the case of SUID/GUID
processes, such processes are not able to read or set their own limits.
This commit changes this by assuming that process can always read/change
its own limits.
NTFS: Fix invalid pointer dereference in ntfs_mft_record_alloc().
In ntfs_mft_record_alloc() when mapping the new extent mft record with
map_extent_mft_record() we overwrite @m with the return value and on
error, we then try to use the old @m but that is no longer there as @m
now contains an error code instead so we crash when dereferencing the
error code as if it were a pointer.
The simple fix is to use a temporary variable to store the return value
thus preserving the original @m for later use. This is a backport from
the commercial Tuxera-NTFS driver and is well tested...
Thanks go to Julia Lawall for pointing this out (whilst I had fixed it
in the commercial driver I had failed to fix it in the Linux kernel).
Signed-off-by: Anton Altaparmakov <anton@tuxera.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Mon, 31 Jan 2011 02:55:38 +0000 (12:55 +1000)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-2.6-cm
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-2.6-cm:
kmemleak: Allow kmemleak metadata allocations to fail
kmemleak: remove memset by using kzalloc
Linus Torvalds [Mon, 31 Jan 2011 02:53:12 +0000 (12:53 +1000)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
ALSA: HDA: Fix automute on Thinkpad L412/L512
ALSA: HDA: Fix dmesg output of HDMI supported bits
ALSA: fix invalid hardware.h include in ac97c for AVR32 architecture
ASoC: correct link specifications for corgi, poodle and spitz
ASoC: Samsung: Fix outdated cpu_dai_name for s3c24xx i2s
ASoC: Fix codec device id format used by some dai_links
ALSA: azt3328 - fix broken AZF_FMT_XLATE macro
ALSA: Xonar, CS43xx: Don't overrun static array
ASoC: Handle low measured DC offsets for wm_hubs devices
ASoC: da8xx/omap-l1xx: match codec_name with i2c ids
ASoC: WM8994: fix wrong value in tristate function
ASoC: WM8995: Fix incorrect use of snd_soc_update_bits()
Linus Torvalds [Mon, 31 Jan 2011 02:51:28 +0000 (12:51 +1000)]
Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
libata: set queue DMA alignment to sector size for ATAPI too
libata: DVR-212D can't do SETXFER DVD-RW DVR-212D
ahci: add HFLAG_YES_FBS and apply it to 88SE9128
pata_hpt37x: inherit prereset() method for HPT374
ahci: AHCI mode SATA patch for Intel DH89xxCC DeviceIDs
pata_hpt37x: fold 'if' statement into 'switch'
pata_hpt{37x|3x2n}: use pr_*(DRV_NAME ...) instead of printk(KERN_* ...)
pata_hpt{366|37x}: use pr_warning(...) instead of printk(KERN_WARNING ...)
pata_mpc52xx: inherit from ata_bmdma_port_ops
Input: synaptics - retry failed resets when reconnecting
On some machines, like Dell Studio XPS 16 (1640), touchpad fails to
respond to the standard query after first reset but may start
responding later, so let's repeat reset sequence several (3) times.
Input: synaptics - fix reconnect logic on MT devices
synaptics_set_advanced_gesture_mode() affect capabilities bits we should
perform comparison after calling this function, otherwise they will never
match and we will be forced to perform full reconnect.
I narrowed the problem down to nfs4_decode_dirent() reporting that the
decode buffer had overflowed while decoding the entries for those
missing files.
verify_attr_len() assumes both it's pointer arguments reside on the
same page. When these arguments point to locations on two different
pages, verify_attr_len() can report false errors. This can happen now
that a large NFSv4 readdir result can span pages.
We have reasonably good checking in nfs4_decode_dirent() anyway, so
it should be safe to simply remove the extra checking.
At a guess, this was introduced by commit 6650239a, "NFS: Don't use
vm_map_ram() in readdir".
Trond Myklebust [Thu, 27 Jan 2011 19:55:39 +0000 (14:55 -0500)]
NFS: Fix an NFS client lockdep issue
There is no reason to be freeing the delegation cred in the rcu callback,
and doing so is resulting in a lockdep complaint that rpc_credcache_lock
is being called from both softirq and non-softirq contexts.
Reported-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@kernel.org
bpm@sgi.com [Wed, 19 Jan 2011 17:41:58 +0000 (17:41 +0000)]
xfs: xfs_bmap_add_extent_delay_real should init br_startblock
When filling in the middle of a previous delayed allocation in
xfs_bmap_add_extent_delay_real, set br_startblock of the new delay
extent to the right to nullstartblock instead of 0 before inserting
the extent into the ifork (xfs_iext_insert), rather than setting
br_startblock afterward.
Adding the extent into the ifork with br_startblock=0 can lead to
the extent being copied into the btree by xfs_bmap_extent_to_btree
if we happen to convert from extents format to btree format before
updating br_startblock with the correct value. The unexpected
addition of this delay extent to the btree can cause subsequent
XFS_WANT_CORRUPTED_GOTO filesystem shutdown in several
xfs_bmap_add_extent_delay_real cases where we are converting a delay
extent to real and unexpectedly find an extent already inserted.
For example:
911 case BMAP_LEFT_FILLING:
912 /*
913 * Filling in the first part of a previous delayed allocation.
914 * The left neighbor is not contiguous.
915 */
916 trace_xfs_bmap_pre_update(ip, idx, state, _THIS_IP_);
917 xfs_bmbt_set_startoff(ep, new_endoff);
918 temp = PREV.br_blockcount - new->br_blockcount;
919 xfs_bmbt_set_blockcount(ep, temp);
920 xfs_iext_insert(ip, idx, 1, new, state);
921 ip->i_df.if_lastex = idx;
922 ip->i_d.di_nextents++;
923 if (cur == NULL)
924 rval = XFS_ILOG_CORE | XFS_ILOG_DEXT;
925 else {
926 rval = XFS_ILOG_CORE;
927 if ((error = xfs_bmbt_lookup_eq(cur, new->br_startoff,
928 new->br_startblock, new->br_blockcount,
929 &i)))
930 goto done;
931 XFS_WANT_CORRUPTED_GOTO(i == 0, done);
With the bogus extent in the btree we shutdown the filesystem at
931. The conversion from extents to btree format happens when the
number of extents in the inode increases above ip->i_df.if_ext_max.
xfs_bmap_extent_to_btree copies extents from the ifork into the
btree, ignoring all delalloc extents which are denoted by
br_startblock having some value of nullstartblock.
Dave Chinner [Fri, 28 Jan 2011 00:20:46 +0000 (11:20 +1100)]
xfs: fix dquot shaker deadlock
Commit 368e136 ("xfs: remove duplicate code from dquot reclaim") fails
to unlock the dquot freelist when the number of loop restarts is
exceeded in xfs_qm_dqreclaim_one(). This causes hangs in memory
reclaim.
Rework the loop control logic into an unwind stack that all the
different cases jump into. This means there is only one set of code
that processes the loop exit criteria, and simplifies the unlocking
of all the items from different points in the loop. It also fixes a
double increment of the restart counter from the qi_dqlist_lock
case.
Reported-by: Malcolm Scott <lkml@malc.org.uk> Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Alex Elder <aelder@sgi.com>
Failure to commit a transaction into the CIL is not handled
correctly. This currently can only happen when racing with a
shutdown and requires an explicit shutdown check, so it rare and can
be avoided. Remove the shutdown check and make the CIL commit a void
function to indicate it will always succeed, thereby removing the
incorrectly handled failure case.
Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Alex Elder <aelder@sgi.com>
Dave Chinner [Thu, 27 Jan 2011 01:18:18 +0000 (12:18 +1100)]
xfs: limit extsize to size of AGs and/or MAXEXTLEN
The extent size hint can be set to larger than an AG. This means
that the alignment process can push the range to be allocated
outside the bounds of the AG, resulting in assert failures or
corrupted bmbt records. Similarly, if the extsize is larger than the
maximum extent size supported, the alignment process will produce
extents that are too large to fit into the bmbt records, resulting
in a different type of assert/corruption failure.
Fix this by limiting extsize at the time іt is set firstly to be
less than MAXEXTLEN, then to be a maximum of half the size of the
AGs in the filesystem for non-realtime inodes. Realtime inodes do
not allocate out of AGs, so don't have to be restricted by the size
of AGs.
Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Alex Elder <aelder@sgi.com>
Dave Chinner [Thu, 27 Jan 2011 01:17:58 +0000 (12:17 +1100)]
xfs: prevent extsize alignment from exceeding maximum extent size
When doing delayed allocation, if the allocation size is for a
maximally sized extent, extent size alignment can push it over this
limit. This results in an assert failure in xfs_bmbt_set_allf() as
the extent length is too large to find in the extent record.
Fix this by ensuring that we allow for space that extent size
alignment requires (up to 2 * (extsize -1) blocks as we have to
handle both head and tail alignment) when limiting the maximum size
of the extent.
Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Alex Elder <aelder@sgi.com>
Dave Chinner [Thu, 27 Jan 2011 01:16:28 +0000 (12:16 +1100)]
xfs: limit extent length for allocation to AG size
Delayed allocation extents can be larger than AGs, so when trying to
convert a large range we may scan every AG inside
xfs_bmap_alloc_nullfb() trying to find an AG with a size larger than
an AG. We should stop when we find the first AG with a maximum
possible allocation size. This causes excessive CPU usage when there
are lots of AGs.
The same problem occurs when doing preallocation of a range larger
than an AG.
Fix the problem by limiting real allocation lengths to the maximum
that an AG can support. This means if we have empty AGs, we'll stop
the search at the first of them. If there are no empty AGs, we'll
still scan them all, but that is a different problem....
Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Alex Elder <aelder@sgi.com>
rounddown_power_of_2() returns an undefined result when passed a
value of zero. The specualtive delayed allocation code is doing this
when the inode is zero length. Hence occasionally the preallocation
is much, much larger than is necessary (e.g. 8GB for a 270 _byte_
file). Ensure we don't even pass a zero value to this function so
the result of preallocation is always the desired size.
Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Alex Elder <aelder@sgi.com>
The cause of the leak is that the "remove" parameter of IOP_UNPIN()
is never set when a CIL push is aborted. This means that the EFI
item is never freed if it was in the push being cancelled. The
problem is specific to delayed logging, but has uncovered a couple
of problems with the handling of IOP_UNPIN(remove).
Firstly, we cannot safely call xfs_trans_del_item() from IOP_UNPIN()
in the CIL commit failure path or the iclog write failure path
because for delayed loging we have no transaction context. Hence we
must only call xfs_trans_del_item() if the log item being unpinned
has an active log item descriptor.
Secondly, xfs_trans_uncommit() does not handle log item descriptor
freeing during the traversal of log items on a transaction. It can
reference a freed log item descriptor when unpinning an EFI item.
Hence it needs to use a safe list traversal method to allow items to
be removed from the transaction during IOP_UNPIN().
Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Alex Elder <aelder@sgi.com>
Tejun Heo [Thu, 20 Jan 2011 12:59:06 +0000 (13:59 +0100)]
libata: set queue DMA alignment to sector size for ATAPI too
ata_pio_sectors() expects buffer for each sector to be contained in a
single page; otherwise, it ends up overrunning the first page. This
is achieved by setting queue DMA alignment. If sector_size is smaller
than PAGE_SIZE and all buffers are sector_size aligned, buffer for
each sector is always contained in a single page.
This wasn't applied to ATAPI devices but IDENTIFY_PACKET is executed
as ATA_PROT_PIO and thus uses ata_pio_sectors(). Newer versions of
udev issue IDENTIFY_PACKET with unaligned buffer triggering the
problem and causing oops.
This patch fixes the problem by setting sdev->sector_size to
ATA_SECT_SIZE on ATATPI devices and always setting DMA alignment to
sector_size. While at it, add a warning for the unlikely but still
possible scenario where sector_size is larger than PAGE_SIZE, in which
case the alignment wouldn't be enough.
Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: John Stanley <jpsinthemix@verizon.net> Tested-by: John Stanley <jpsinthemix@verizon.net> Cc: stable@kernel.org Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Anssi Hannula [Wed, 19 Jan 2011 01:03:26 +0000 (20:03 -0500)]
ahci: add HFLAG_YES_FBS and apply it to 88SE9128
Commit 5f173107ecad83a50 added HFLAG_YES_FBS workaround for 88SE9128
(1b4b:9123).
However, that change inadvertently caused the legacy IDE interface of
the controller (with the same pci id) to become associated with the AHCI
driver as well, causing the driver to try to bring the interface up in
vain.
Fix that by matching against class as well.
Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Sergei Shtylyov [Tue, 11 Jan 2011 18:01:23 +0000 (21:01 +0300)]
pata_hpt37x: inherit prereset() method for HPT374
Commit ab81a505ae6be069be5b67acd7e1bab3cfb53968 (pata_hpt37x: unify ->pre_reset
methods) neglected to remove the initializer for the prereset() method from
'hpt374_fn1_port_ops' (it's inherited from 'hpt372_port_ops' anyway), as well
as to update the comment in hpt37x_init_one()...
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Sergei Shtylyov [Mon, 10 Jan 2011 19:31:13 +0000 (22:31 +0300)]
pata_hpt37x: fold 'if' statement into 'switch'
hpt37x_init_one() has a large *if* statement which should really be folded into
the *switch* statement that currently constitutes its *else* branch, reducing
one level of indentation...
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Linus Torvalds [Fri, 28 Jan 2011 02:24:34 +0000 (12:24 +1000)]
Merge branch 'stable/bug-fixes-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
* 'stable/bug-fixes-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
xen/setup: Route halt operations to safe_halt pvop.
xen/e820: Guard against E820_RAM not having page-aligned size or start.
xen/p2m: Mark INVALID_P2M_ENTRY the mfn_list past max_pfn.
Linus Torvalds [Fri, 28 Jan 2011 02:12:58 +0000 (12:12 +1000)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
ceph: avoid picking MDS that is not active
ceph: avoid immediate cap check after import
ceph: fix flushing of caps vs cap import
ceph: fix erroneous cap flush to non-auth mds
ceph: fix cap_wanted_delay_{min,max} mount option initialization
ceph: fix xattr rbtree search
ceph: fix getattr on directory when using norbytes
Linus Torvalds [Fri, 28 Jan 2011 02:10:13 +0000 (12:10 +1000)]
Merge branch 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
drm/nv50: fix regression on IGPs
drm/radeon/kms: re-emit full context state for evergreen blits
drm/radeon/kms: release CMASK access in preclose_kms
drm/radeon/kms: fix r6xx+ scanout on BE systems
drm/radeon/kms: clean up some magic numbers
drm/radeon/kms: only enable HDMI mode if radeon audio is enabled
radeon/kms: fix dp displayport mode validation
drm/nvc0/grctx: correct an off-by-one
drm/nv50: Fix race with PFIFO during PGRAPH context destruction.
drm/nouveau: Workaround incorrect DCB entry on a GeForce3 Ti 200.
drm/nvc0: implement irq handler for whatever's at 0x14xxxx
drm/nvc0: fix incorrect TPC register setup
drm/nouveau: probe for adt7473 before f75375
drm/nouveau: remove dead function definition
arch/arm/mach-omap2/mux.c: In function '_omap_mux_get_by_name':
arch/arm/mach-omap2/mux.c:163:17: warning: 'found_mode' may be used
uninitialized in this function
Signed-off-by: Felipe Balbi <balbi@ti.com>
[tony@atomide.com: updated comments] Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Thu, 27 Jan 2011 23:52:16 +0000 (15:52 -0800)]
omap1: Simplify use of omap_irq_flags
Commit 03a9e5126147c9f92aeba4b34f62b15b625087fb
(omap1: Use asm_irq_flags for entry-macro.S) added support
for multi-omap builds with addition of the omap_irq_flags.
Commit 9f9605c2eda9679e6f63c605cbd9cbf6a9a7f3fa
(omap2+: Fix unused variable warning for omap_irq_base)
simplified omap2+ entry-macro.S by moving omap_irq_flags
out of entry-macro.S.
Simplify omap1 entry-macro.S in a similar way to keep the
code consistent. Based on a similar earlier patch for omap2+
by Russell King <rmk+kernel@arm.linux.org.uk>.
Russell King [Fri, 7 Jan 2011 11:57:44 +0000 (11:57 +0000)]
omap2+: Fix unused variable warning for omap_irq_base
Commit 5d190c40100793a6dfc37bf325677c10f3c80edf
(omap2+: Initialize omap_irq_base for entry-macro.S from
platform code) simplified the handling of omap_irq_base
for multi-omap builds. However, this patch also introduced
a build warning for !MULTI_OMAP2 builds:
arch/arm/mach-omap2/io.c: In function 'omap_irq_base_init':
arch/arm/mach-omap2/io.c:322: warning: unused variable 'omap_irq_base'
Fix this by removing the ifdef. Also simplify things further
by moving omap_irq_base out of entry-macro.S.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
[tony@atomide.com: updated comments] Signed-off-by: Tony Lindgren <tony@atomide.com>
Linus Walleij [Thu, 27 Jan 2011 16:44:34 +0000 (17:44 +0100)]
ARM: 6642/1: mmci: calculate remaining bytes at error correctly
The MMCIDATACNT register contain the number of byte left at error
not the number of words, so loose the << 2 thing. Further if CRC
fails on the first block, we may end up with a negative number
of transferred bytes which is not good, and the formula was in
wrong order.
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Linus Torvalds [Thu, 27 Jan 2011 20:43:41 +0000 (06:43 +1000)]
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
percpu, x86: Fix percpu_xchg_op()
x86: Remove left over system_64.h
x86-64: Don't use pointer to out-of-scope variable in dump_trace()
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (43 commits)
bnx2: Eliminate AER error messages on systems not supporting it
cnic: Fix big endian bug
xfrm6: Don't forget to propagate peer into ipsec route.
tg3: Use new VLAN code
bonding: update documentation - alternate configuration.
TCP: fix a bug that triggers large number of TCP RST by mistake
MAINTAINERS: remove Reinette Chatre as iwlwifi maintainer
rt2x00: add device id for windy31 usb device
mac80211: fix a crash in ieee80211_beacon_get_tim on change_interface
ipv6: Revert 'administrative down' address handling changes.
textsearch: doc - fix spelling in lib/textsearch.c.
USB NET KL5KUSB101: Fix mem leak in error path of kaweth_download_firmware()
pch_gbe: don't use flush_scheduled_work()
bnx2: Always set ETH_FLAG_TXVLAN
net: clear heap allocation for ethtool_get_regs()
ipv6: Always clone offlink routes.
dcbnl: make get_app handling symmetric for IEEE and CEE DCBx
tcp: fix bug in listening_get_next()
inetpeer: Use correct AVL tree base pointer in inet_getpeer().
GRO: fix merging a paged skb after non-paged skbs
...
projects / linux-beck.git / log