Olof Johansson [Thu, 29 Aug 2013 21:00:28 +0000 (14:00 -0700)]
Merge tag 'sunxi-dt-for-3.12-4' of https://github.com/mripard/linux into late/all
From Maxime Ripard:
Allwinner DT changes for 3.12, take 3 and 4
These patches add support for:
- The cubieboard2 board
- The pinctrl driver that got merged for the A20 and A31
- The associated muxing for the A20 and A31 boards already supported
- Enables the gated clocks on the A10s, A20 and A31 DTSI.
* tag 'sunxi-dt-for-3.12-4' of https://github.com/mripard/linux:
ARM: sun7i: Enable the A20 clocks in the DTSI
ARM: sun6i: Enable clock support in the DTSI
ARM: sun5i: dt: Use the A10s gates in the DTSI
ARM: sun7i: Add Cubieboard2 Device Tree
ARM: sun7i: a20-olinuxino: Enable the user LED
ARM: sun7i: a20-olinuxino: Enable UARTs muxing
ARM: sun7i: DT: Add UART muxing options to the DTSI
ARM: sun7i: Add the PIO controller node to the DTSI
ARM: sun6i: colombus: Add uart0 muxing
ARM: sun6i: Add UART0 muxing options
ARM: sunxi: dt: Add PIO controller to A31 DTSI
Olof Johansson [Thu, 29 Aug 2013 20:31:05 +0000 (13:31 -0700)]
Merge tag 'at91-dt' of git://github.com/at91linux/linux-at91 into late/all
From Nicolas Ferre:
AT91 DT changes for 3.12, take 2
- addition of the Nand Flash Controller (NFC) in DT
for sama5d3 SoC. This NFC will enhance the traditional
Nand Flash handling (SMC + PMECC).
* tag 'at91-dt' of git://github.com/at91linux/linux-at91:
ARM: at91/dt: sama5d3xek: reduce the ROM code mapping for pmecc lookup table
ARM: at91/dt: sama5d3xek: Enable NFC support in dts
ARM: at91/dt: sama5d3xek: remove the useless NFC dt parameters
ARM: at91/dt: sam9x5ek: add sound configuration
ARM: at91/dt: sam9x5ek: enable SSC
ARM: at91/dt: sam9x5ek: add WM8731 codec
ARM: at91/dt: sam9x5: add SSC DMA parameters
ARM: at91/dt: add at91rm9200 PQFP package version
ARM: at91: at91rm9200: set default mmc0 pinctrl-names
ARM: at91: at91sam9n12: correct pin number of gpio-key
ARM: at91: at91sam9n12: add qt1070 support
ARM: at91: at91sam9n12: add pinctrl of TWI
ARM: at91: Add PMU support for sama5d3
ARM: at91: at91sam9260: add missing pinctrl-names on mmc
Olof Johansson [Thu, 29 Aug 2013 20:29:35 +0000 (13:29 -0700)]
Merge tag 'samsung-mach-exynos-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into late/all
update mach-exynos v2 for v3.12
- enable ARCH_HAS_BANDGAP for exynos SoCs
- always enable PM domains for exynos4x12
- skip C1 cpuidle state for exynos5440
* tag 'samsung-mach-exynos-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: EXYNOS: Skip C1 cpuidle state for exynos5440
ARM: EXYNOS: always enable PM domains support for EXYNOS4X12
ARM: EXYNOS: enable ARCH_HAS_BANDGAP
Olof Johansson [Thu, 29 Aug 2013 20:27:40 +0000 (13:27 -0700)]
Merge tag 'samsung-dt-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into late/all
From Kukjin Kim:
Update exynos DT:
- fix the RTC DT node name for exynos5250
- update the "status" property of RTC DT node for exynos5250
- add RTC DT node for exynos5420
- add ADC DT node for exynos5420 and exynos5250
Based on previouse exynos DT branch, v3.12-next/dt-exynos
* tag 'samsung-dt-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (42 commits)
ARM: dts: add ADC device tree node for exynos5420/5250
ARM: dts: Add RTC DT node to Exynos5420 SoC
ARM: dts: Update the "status" property of RTC DT node for Exynos5250 SoC
ARM: dts: Fix the RTC DT node name for Exynos5250
ARM: dts: Add USB host node for Exynos4
ARM: dts: add audio clock controller for exynos5420
ARM: dts: Correct the /include entry on exynos5420 dtsi file
ARM: dts: Add MFC node for exynos 5420
ARM: dts: Update 5250 MFC node
ARM: dts: Remove unsused MFC clock from exynos4
ARM: dts: Update clocks entry in MFC binding documentation
ARM: dts: Hook up internal PHY on Arndale
ARM: dts: Enable USB hub on Arndale
ARM: dts: Add secure-firmware boot support for OrigenQaud board
ARM: dts: Add pin state information for DP HPD support to Exynos5420
ARM: dts: Add DP controller DT node to exynos5420 SoC
ARM: dts: Update DP controller DT Node for Exynos5 based SoCs
ARM: dts: Add FIMD DT node to exynos5420 DTS files
ARM: dts: Add basic PM domains for EXYNOS5420
ARM: dts: Update FIMD DT node for Exynos5 SoCs
...
Olof Johansson [Thu, 29 Aug 2013 20:21:24 +0000 (13:21 -0700)]
Merge tag 'mmp-irq' of git://git.kernel.org/pub/scm/linux/kernel/git/hzhuang1/linux into late/all
From Haojian Zhuang:
Move irq driver out of mach-mmp to support multiplatform
* tag 'mmp-irq' of git://git.kernel.org/pub/scm/linux/kernel/git/hzhuang1/linux:
irqchip: mmp: avoid to include irqs head file
ARM: mmp: avoid to include head file in mach-mmp
irqchip: mmp: support irqchip
irqchip: move mmp irq driver
Olof Johansson [Thu, 29 Aug 2013 20:19:40 +0000 (13:19 -0700)]
Merge tag 'ux500-core-for-arm-soc-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into late/all
From Linus Walleij:
Ux500 core changes for ARM SoC:
- Cleanup from Julia Lawall
- Clean out old pin definitions
- Fix the I2C devices
* tag 'ux500-core-for-arm-soc-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
ARM: ux500: fix up the I2C devices
ARM: ux500: delete oldschool pin defines
arch/arm/mach-ux500/cpu-db8500.c: Avoid using ARRAY_AND_SIZE(e) as a function argument
ARM: ux500: set coherent_dma_mask for dma40
ARM: ux500: remove u8500_secondary_startup from INIT section.
ARM: ux500: add restart support via prcmu
This patch skips the deep C1(AFTR -Arm off top running) state for
exynos5440 SoC as this soc does not support this state. The cpu's
only allows the basic C0 state.
The C1 state is filtered by re-initialising the driver state_count
value to 1.
Suggested-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Linus Torvalds [Sun, 25 Aug 2013 19:44:15 +0000 (12:44 -0700)]
Merge tag 'staging-3.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging fixes from Greg KH:
"Here are two tiny staging tree fixes (well, one is for an iio driver,
but those updates come through the staging tree due to dependancies)
One fixes a problem with an IIO driver, and the other fixes a bug in
the comedi driver core"
* tag 'staging-3.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: comedi: bug-fix NULL pointer dereference on failed attach
iio: adjd_s311: Fix non-scan mode data read
Linus Torvalds [Sun, 25 Aug 2013 19:41:37 +0000 (12:41 -0700)]
Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-arm
Pull ARM fixes from Russell King:
"This round of fixes is smaller than previous: a couple more updates
for the security fixes, and a one-liner kexec fix"
* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
ARM: 7816/1: CONFIG_KUSER_HELPERS: fix help text
ARM: 7815/1: kexec: offline non panic CPUs on Kdump panic
ARM: 7819/1: fiq: Cast the first argument of flush_icache_range()
Linus Torvalds [Sun, 25 Aug 2013 19:25:38 +0000 (12:25 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs fixes from Al Viro:
"Assorted fixes from the last week or so"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
VFS: collect_mounts() should return an ERR_PTR
bfs: iget_locked() doesn't return an ERR_PTR
efs: iget_locked() doesn't return an ERR_PTR()
proc: kill the extra proc_readfd_common()->dir_emit_dots()
cope with potentially long ->d_dname() output for shmem/hugetlb
Vikas Sajjan [Sun, 25 Aug 2013 17:28:05 +0000 (02:28 +0900)]
ARM: dts: Update the "status" property of RTC DT node for Exynos5250 SoC
Moves the RTC DT node's "status" property from exynos5250 board
(arndale & snow) dts files to exynos5250.dtsi, since the bindings
in exynos5250.dtsi depicts the RTC h/w completely.
Signed-off-by: Vikas Sajjan <vikas.sajjan@linaro.org> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Linus Torvalds [Sat, 24 Aug 2013 18:34:33 +0000 (11:34 -0700)]
Merge tag 'acpi-3.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"I really hoped that it wouldn't be necessary to change anything in
ACPI at this point, but it turns out that we need to revert one more
ACPI video commit causing trouble.
This reverts a change in the ACPI video driver that caused the ACPI
backlight initialization to be carried out even if acpi_backlight=vendor
is passed in the kernel command line which turns out to break things
at least on one system"
* tag 'acpi-3.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "ACPI / video: Always call acpi_video_init_brightness() on init"
Linus Torvalds [Sat, 24 Aug 2013 18:33:21 +0000 (11:33 -0700)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is a set of small bug fixes for lpfc and zfcp and a fix for a
fairly nasty bug in sg where a process which cancels I/O completes in
a kernel thread which would then try to write back to the now gone
userspace and end up writing to a random kernel address instead"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
[SCSI] zfcp: remove access control tables interface (keep sysfs files)
[SCSI] zfcp: fix schedule-inside-lock in scsi_device list loops
[SCSI] zfcp: fix lock imbalance by reworking request queue locking
[SCSI] sg: Fix user memory corruption when SG_IO is interrupted by a signal
[SCSI] lpfc: Don't force CONFIG_GENERIC_CSUM on
Dan Carpenter [Wed, 14 Aug 2013 09:44:39 +0000 (12:44 +0300)]
VFS: collect_mounts() should return an ERR_PTR
This should actually be returning an ERR_PTR on error instead of NULL.
That was how it was designed and all the callers expect it.
[AV: actually, that's what "VFS: Make clone_mnt()/copy_tree()/collect_mounts()
return errors" missed - originally collect_mounts() was expected to return
NULL on failure]
Cc: <stable@vger.kernel.org> # 3.10+ Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Sat, 24 Aug 2013 16:08:17 +0000 (12:08 -0400)]
cope with potentially long ->d_dname() output for shmem/hugetlb
dynamic_dname() is both too much and too little for those - the
output may be well in excess of 64 bytes dynamic_dname() assumes
to be enough (thanks to ashmem feeding really long names to
shmem_file_setup()) and vsnprintf() is an overkill for those
guys.
Haojian Zhuang [Mon, 3 Jun 2013 02:02:59 +0000 (10:02 +0800)]
ARM: mmp: avoid to include head file in mach-mmp
pxa910_set_wake() & mmp2_set_wake() are both declared in head files
of arch/arm/mach-mmp/include/mach directory. If we include these
head files in irq-mmp driver, it blocks the multiplatform build.
So adjust the code.
Linus Torvalds [Fri, 23 Aug 2013 17:59:42 +0000 (10:59 -0700)]
Merge branch 'for-3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata fixes from Tejun Heo:
"This contains three commits all of which are updates for specific
devices which aren't too widespread. Pretty limited scope and nothing
too interesting or dangerous"
* 'for-3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
sata_fsl: save irqs while coalescing
libata: apply behavioral quirks to sil3826 PMP
sata, highbank: fix ordering of SGPIO signals
Linus Torvalds [Fri, 23 Aug 2013 17:58:50 +0000 (10:58 -0700)]
Merge branch 'for-3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fix from Tejun Heo:
"A late fix for cgroup.
This fixes a behavior regression visible to userland which was created
by a commit merged during -rc1. While the behavior change isn't too
likely to be noticeable, the fix is relatively low risk and we'll need
to backport it through -stable anyway if the bug gets released"
* 'for-3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cpuset: fix a regression in validating config change
Linus Torvalds [Fri, 23 Aug 2013 17:46:28 +0000 (10:46 -0700)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Ben was on holidays for a week so a few nouveau regression fixes
backed up, but they all seem necessary.
Otherwise one i915 and one gma500 fix"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
gma500: Fix SDVO turning off randomly
drm/nv04/disp: fix framebuffer pin refcounting
drm/nouveau/mc: fix race condition between constructor and request_irq()
drm/nouveau: fix reclocking on nv40
drm/nouveau/ltcg: fix allocating memory as free
drm/nouveau/ltcg: fix ltcg memory initialization after suspend
drm/nouveau/fb: fix null derefs in nv49 and nv4e init
drm/i915: Invalidate TLBs for the rings after a reset
Commit 94ae9843 (usb: phy: rename all phy drivers to phy-$name-usb.c)
renamed drivers/usb/phy/otg_fsm.h to drivers/usb/phy/phy-fsm-usb.h
but changed drivers/usb/phy/phy-fsm-usb.c to include not existing
"phy-otg-fsm.h" instead of new "phy-fsm-usb.h". This breaks building:
...
drivers/usb/phy/phy-fsm-usb.c:32:25: fatal error: phy-otg-fsm.h: No such file or directory
compilation terminated.
make[3]: *** [drivers/usb/phy/phy-fsm-usb.o] Error 1
This commit also missed to modify drivers/usb/phy/phy-fsl-usb.h
to include new "phy-fsm-usb.h" instead of "otg_fsm.h" resulting
in another build breakage:
...
In file included from drivers/usb/phy/phy-fsl-usb.c:46:0:
drivers/usb/phy/phy-fsl-usb.h:18:21: fatal error: otg_fsm.h: No such file or directory
compilation terminated.
make[3]: *** [drivers/usb/phy/phy-fsl-usb.o] Error 1
Alan Stern [Wed, 21 Aug 2013 14:33:17 +0000 (10:33 -0400)]
USB: OHCI: add missing PCI PM callbacks to ohci-pci.c
Commit c1117afb8589 (USB: OHCI: make ohci-pci a separate driver)
neglected to preserve the entries for the pci_suspend and pci_resume
driver callbacks. As a result, OHCI controllers don't work properly
during suspend and after hibernation.
This patch adds the missing callbacks to the driver.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by: Steve Cotton <steve@s.cotton.clara.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 23 Aug 2013 11:37:17 +0000 (12:37 +0100)]
staging: comedi: bug-fix NULL pointer dereference on failed attach
Commit dcd7b8bd63cb81c5b973bf86510ca3c80bbbd162 ("staging: comedi: put
module _after_ detach" by myself) reversed a couple of calls in
`comedi_device_attach()` when recovering from an error returned by the
low-level driver's 'attach' handler. Unfortunately, that introduced a
NULL pointer dereference bug as `dev->driver` is NULL after the call to
`comedi_device_detach()`. We still have a pointer to the low-level
comedi driver structure in the `driv` variable, so use that instead.
1) Revert Johannes Berg's genetlink locking fix, because it causes
regressions.
Johannes and Pravin Shelar are working on fixing things properly.
2) Do not drop ipv6 ICMP messages without a redirected header option,
they are legal. From Duan Jiong.
3) Missing error return propagation in probing of via-ircc driver.
From Alexey Khoroshilov.
4) Do not clear out broadcast/multicast/unicast/WOL bits in r8169 when
initializing, from Peter Wu.
5) realtek phy driver programs wrong interrupt status bit, from
Giuseppe CAVALLARO.
6) Fix statistics regression in AF_PACKET code, from Willem de Bruijn.
7) Bridge code uses wrong bitmap length, from Toshiaki Makita.
8) SFC driver uses wrong indexes to look up MAC filters, from Ben
Hutchings.
9) Don't pass stack buffers into usb control operations in hso driver,
from Daniel Gimpelevich.
10) Multiple ipv6 fragmentation headers in one packet is illegal and
such packets should be dropped, from Hannes Frederic Sowa.
11) When TCP sockets are "repaired" as part of checkpoint/restart, the
timestamp field of SKBs need to be refreshed otherwise RTOs can be
wildly off. From Andrey Vagin.
12) Fix memcpy args (uses 'address of pointer' instead of 'pointer') in
hostp driver. From Dan Carpenter.
13) nl80211hdr_put() doesn't return an ERR_PTR, but some code believes
it does. From Dan Carpenter.
14) Fix regression in wireless SME disconnects, from Johannes Berg.
15) Don't use a stack buffer for DMA in zd1201 USB wireless driver, from
Jussi Kivilinna.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (33 commits)
ipv4: expose IPV4_DEVCONF
ipv6: handle Redirect ICMP Message with no Redirected Header option
be2net: fix disabling TX in be_close()
Revert "genetlink: fix family dump race"
hso: Fix stack corruption on some architectures
hso: Earlier catch of error condition
sfc: Fix lookup of default RX MAC filters when steered using ethtool
bridge: Use the correct bit length for bitmap functions in the VLAN code
packet: restore packet statistics tp_packets to include drops
net: phy: rtl8211: fix interrupt on status link change
r8169: remember WOL preferences on driver load
via-ircc: don't return zero if via_ircc_open() failed
macvtap: Ignore tap features when VNET_HDR is off
macvtap: Correctly set tap features when IFF_VNET_HDR is disabled.
macvtap: simplify usage of tap_features
tcp: set timestamps for restored skb-s
bnx2x: set VF DMAE when first function has 0 supported VFs
bnx2x: Protect against VFs' ndos when SR-IOV is disabled
bnx2x: prevent VF benign attentions
bnx2x: Consider DCBX remote error
...
Linus Torvalds [Fri, 23 Aug 2013 16:52:32 +0000 (09:52 -0700)]
Merge branch 'akpm' (patches from Andrew Morton)
Merge fixes from Andrew Morton:
"A few fixes. One is a licensing change and I don't do licensing, so
please eyeball that one"
Licensing eye-balled.
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
lib/lz4: correct the LZ4 license
memcg: get rid of swapaccount leftovers
nilfs2: fix issue with counting number of bio requests for BIO_EOPNOTSUPP error detection
nilfs2: remove double bio_put() in nilfs_end_bio_write() for BIO_EOPNOTSUPP error
drivers/platform/olpc/olpc-ec.c: initialise earlier
Richard Laager [Thu, 22 Aug 2013 23:35:47 +0000 (16:35 -0700)]
lib/lz4: correct the LZ4 license
The LZ4 code is listed as using the "BSD 2-Clause License".
Signed-off-by: Richard Laager <rlaager@wiktel.com> Acked-by: Kyungsik Lee <kyungsik.lee@lge.com> Cc: Chanho Min <chanho.min@lge.com> Cc: Richard Yao <ryao@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ The 2-clause BSD can be just converted into GPL, but that's rude and
pointless, so don't do it - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Thu, 22 Aug 2013 23:35:46 +0000 (16:35 -0700)]
memcg: get rid of swapaccount leftovers
The swapaccount kernel parameter without any values has been removed by
commit a2c8990aed5a ("memsw: remove noswapaccount kernel parameter") but
it seems that we didn't get rid of all the left overs.
Make sure that menuconfig help text and kernel-parameters.txt are clear
about value for the paramter and remove the stalled comment which is not
very much useful on its own.
Signed-off-by: Michal Hocko <mhocko@suse.cz> Reported-by: Gergely Risko <gergely@risko.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
nilfs2: fix issue with counting number of bio requests for BIO_EOPNOTSUPP error detection
Fix the issue with improper counting number of flying bio requests for
BIO_EOPNOTSUPP error detection case.
The sb_nbio must be incremented exactly the same number of times as
complete() function was called (or will be called) because
nilfs_segbuf_wait() will call wail_for_completion() for the number of
times set to sb_nbio:
do {
wait_for_completion(&segbuf->sb_bio_event);
} while (--segbuf->sb_nbio > 0);
Two functions complete() and wait_for_completion() must be called the
same number of times for the same sb_bio_event. Otherwise,
wait_for_completion() will hang or leak.
nilfs2: remove double bio_put() in nilfs_end_bio_write() for BIO_EOPNOTSUPP error
Remove double call of bio_put() in nilfs_end_bio_write() for the case of
BIO_EOPNOTSUPP error detection. The issue was found by Dan Carpenter
and he suggests first version of the fix too.
Being a low-level component, various drivers (e.g. olpc-battery) assume
that it is ok to communicate with the OLPC Embedded Controller during
probe. Therefore the OLPC EC driver must be initialised before other
drivers try to use it. This was the case until it was recently moved
out of arch/x86 and restructured around commits ac2504151f5a ("Platform:
OLPC: turn EC driver into a platform_driver") and 85f90cf6ca56 ("x86:
OLPC: switch over to using new EC driver on x86").
Use arch_initcall so that olpc-ec is readied earlier, matching the
previous behaviour.
Fixes a regression introduced in Linux-3.6 where various drivers such as
olpc-battery and olpc-xo1-sci failed to load due to an inability to
communicate with the EC. The user-visible effect was a lack of battery
monitoring, missing ebook/lid switch input devices, etc.
Signed-off-by: Daniel Drake <dsd@laptop.org> Cc: Andres Salomon <dilinger@queued.net> Cc: Paul Fox <pgf@laptop.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
IP sends device configuration (see inet_fill_link_af) as an array
in the netlink information, but the indices in that array are not
exposed to userspace through any current santized header file.
It was available back in 2.6.32 (in /usr/include/linux/sysctl.h)
but was broken by:
commit 02291680ffba92e5b5865bc0c5e7d1f3056b80ec
Author: Eric W. Biederman <ebiederm@xmission.com>
Date: Sun Feb 14 03:25:51 2010 +0000
net ipv4: Decouple ipv4 interface parameters from binary sysctl numbers
Eric was solving the sysctl problem but then the indices were re-exposed
by a later addition of devconf support for IPV4
Duan Jiong [Thu, 22 Aug 2013 04:07:35 +0000 (12:07 +0800)]
ipv6: handle Redirect ICMP Message with no Redirected Header option
rfc 4861 says the Redirected Header option is optional, so
the kernel should not drop the Redirect Message that has no
Redirected Header option. In this patch, the function
ip6_redirect_no_header() is introduced to deal with that
condition.
Signed-off-by: Duan Jiong <duanj.fnst@cn.fujitsu.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Sathya Perla [Thu, 22 Aug 2013 06:53:41 +0000 (12:23 +0530)]
be2net: fix disabling TX in be_close()
commit fba875591 ("disable TX in be_close()") disabled TX in be_close()
to protect be_xmit() from touching freed up queues in the AER recovery
flow. But, TX must be disabled *before* cleaning up TX completions in
the close() path, not after. This allows be_tx_compl_clean() to free up
all TX-req skbs that were notified to the HW.
Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Revert "ACPI / video: Always call acpi_video_init_brightness() on init"
Revert commit c04c697 (ACPI / video: Always call acpi_video_init_brightness()
on init), because it breaks eDP backlight at 1920x1080 on Acer Aspire S3
for Trevor Bortins.
References: https://bugs.freedesktop.org/show_bug.cgi?id=68355 Reported-and-bisected-by: Trevor Bortins <enabfluw@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
It turns out that the change introduced a potential deadlock
by causing a locking dependency with netlink's cb_mutex. I
can't seem to find a way to resolve this without doing major
changes to the locking, so revert this.
Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Thu, 22 Aug 2013 20:04:11 +0000 (13:04 -0700)]
Merge branch 'linux-next' of git://cavan.codon.org.uk/platform-drivers-x86
Pull x86 platform driver fixes from Matthew Garrett:
"Three trivial fixes - the first reverts a patch that's broken some
other devices (again - I'm trying to figure out a clean way to
implement this), the other two fix minor issues in the sony-laptop
driver"
* 'linux-next' of git://cavan.codon.org.uk/platform-drivers-x86:
Revert "hp-wmi: Enable hotkeys on some systems"
sony-laptop: Fix reporting of gfx_switch_status
sony-laptop: return a negative error code in sonypi_compat_init()
Linus Torvalds [Thu, 22 Aug 2013 17:44:44 +0000 (10:44 -0700)]
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"A handful of fixes for 3.11 are still trickling in. These are:
- A couple of fixes for older OMAP platforms
- Another few fixes for at91 (lateish due to European summer
vacations)
- A late-found problem with USB on Tegra, fix is to keep VBUS
regulator on at all times
- One fix for Exynos 5440 dealing with CPU detection
- One MAINTAINERS update"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: tegra: always enable USB VBUS regulators
ARM: davinci: nand: specify ecc strength
ARM: OMAP: rx51: change musb mode to OTG
ARM: OMAP2: fix musb usage for n8x0
MAINTAINERS: Update email address for Benoit Cousson
ARM: at91/DT: fix at91sam9n12ek memory node
ARM: at91: add missing uart clocks DT entries
ARM: SAMSUNG: fix to support for missing cpu specific map_io
ARM: at91/DT: at91sam9x5ek: fix USB host property to enable port C
Linus Torvalds [Thu, 22 Aug 2013 17:43:47 +0000 (10:43 -0700)]
Merge tag 'devicetree-fixes-for-3.11' of git://sources.calxeda.com/kernel/linux
Pull device tree fix from Rob Herring:
"For DT unflattening, add missing memory initialization.
This is needed for arches like PPC that use memblock_alloc. This
appears to have been an issue for some time, but is a somewhat limited
usecase of OF_DYNAMIC"
* tag 'devicetree-fixes-for-3.11' of git://sources.calxeda.com/kernel/linux:
of: fdt: fix memory initialization for expanded DT
Linus Torvalds [Thu, 22 Aug 2013 17:43:00 +0000 (10:43 -0700)]
Merge tag 'dm-3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fix from Mike Snitzer:
"A patch to fix dm-cache-policy-mq's remove_mapping() conflict with
sparc32"
* tag 'dm-3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm cache: avoid conflicting remove_mapping() in mq policy
Radu Caragea [Wed, 21 Aug 2013 17:55:59 +0000 (20:55 +0300)]
x86 get_unmapped_area: Access mmap_legacy_base through mm_struct member
This is the updated version of df54d6fa5427 ("x86 get_unmapped_area():
use proper mmap base for bottom-up direction") that only randomizes the
mmap base address once.
Signed-off-by: Radu Caragea <sinaelgl@gmail.com> Reported-and-tested-by: Jeff Shorey <shoreyjeff@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Michel Lespinasse <walken@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Adrian Sendroiu <molecula2788@gmail.com> Cc: Greg KH <greg@kroah.com> Cc: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The commit isn't necessarily wrong, but because it recalculates the
random mmap_base every time, it seems to confuse user memory allocators
that expect contiguous mmap allocations even when the mmap address isn't
specified.
In particular, the MATLAB Java runtime seems to be unhappy. See
https://bugzilla.kernel.org/show_bug.cgi?id=60774
So we'll want to apply the random offset only once, and Radu has a patch
for that. Revert this older commit in order to apply the other one.
Reported-by: Jeff Shorey <shoreyjeff@gmail.com> Cc: Radu Caragea <sinaelgl@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Martin Peschke [Thu, 22 Aug 2013 15:45:38 +0000 (17:45 +0200)]
[SCSI] zfcp: remove access control tables interface (keep sysfs files)
By popular demand, this patch brings back a couple of sysfs attributes
removed by commit 663e0890e31cb85f0cca5ac1faaee0d2d52880b5
"[SCSI] zfcp: remove access control tables interface".
The content has been irrelevant for years, but the files must be
there forever for whatever user space tools that may rely on them.
Since these files always return a constant value, a new stripped
down show-macro was required. Otherwise build warnings would have
been introduced.
Signed-off-by: Martin Peschke <mpeschke@linux.vnet.ibm.com> Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Apparently, the ref_count for some scsi_device drops down to zero,
triggering device removal through execute_in_process_context(), while
the lldd error recovery thread iterates through a scsi device list.
Unfortunately, execute_in_process_context() decides to immediately
execute that device removal function, instead of scheduling asynchronous
execution, since it detects process context and thinks it is safe to do
so. But almost all calls to shost_for_each_device() in our lldd are
inside spin_lock_irq, even in thread context. Obviously, schedule()
inside spin_lock_irq sections is a bad idea.
Change the lldd to use the proper iterator function,
__shost_for_each_device(), in combination with required locking.
Occurences that need to be changed include all calls in zfcp_erp.c,
since those might be executed in zfcp error recovery thread context
with a lock held.
Other occurences of shost_for_each_device() in zfcp_fsf.c do not
need to be changed (no process context, no surrounding locking).
The problem was introduced in Linux 2.6.37 by commit b62a8d9b45b971a67a0f8413338c230e3117dff5
"[SCSI] zfcp: Use SCSI device data zfcp_scsi_dev instead of zfcp_unit".
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Peschke <mpeschke@linux.vnet.ibm.com> Cc: stable@vger.kernel.org #2.6.37+ Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Martin Peschke [Thu, 22 Aug 2013 15:45:36 +0000 (17:45 +0200)]
[SCSI] zfcp: fix lock imbalance by reworking request queue locking
This patch adds wait_event_interruptible_lock_irq_timeout(), which is a
straight-forward descendant of wait_event_interruptible_timeout() and
wait_event_interruptible_lock_irq().
The zfcp driver used to call wait_event_interruptible_timeout()
in combination with some intricate and error-prone locking. Using
wait_event_interruptible_lock_irq_timeout() as a replacement
nicely cleans up that locking.
This rework removes a situation that resulted in a locking imbalance
in zfcp_qdio_sbal_get():
BUG: workqueue leaked lock or atomic: events/1/0xffffff00/10
last function: zfcp_fc_wka_port_offline+0x0/0xa0 [zfcp]
It was introduced by commit c2af7545aaff3495d9bf9a7608c52f0af86fb194
"[SCSI] zfcp: Do not wait for SBALs on stopped queue", which had a new
code path related to ZFCP_STATUS_ADAPTER_QDIOUP that took an early exit
without a required lock being held. The problem occured when a
special, non-SCSI I/O request was being submitted in process context,
when the adapter's queues had been torn down. In this case the bug
surfaced when the Fibre Channel port connection for a well-known address
was closed during a concurrent adapter shut-down procedure, which is a
rare constellation.
This patch also fixes these warnings from the sparse tool (make C=1):
drivers/s390/scsi/zfcp_qdio.c:224:12: warning: context imbalance in
'zfcp_qdio_sbal_check' - wrong count at exit
drivers/s390/scsi/zfcp_qdio.c:244:5: warning: context imbalance in
'zfcp_qdio_sbal_get' - unexpected unlock
Last but not least, we get rid of that crappy lock-unlock-lock
sequence at the beginning of the critical section.
It is okay to call zfcp_erp_adapter_reopen() with req_q_lock held.
Stephen Warren [Tue, 20 Aug 2013 20:00:13 +0000 (14:00 -0600)]
ARM: tegra: always enable USB VBUS regulators
This fixes a regression exposed during the merge window by commit 9f310de "ARM: tegra: fix VBUS regulator GPIO polarity in DT"; namely that
USB VBUS doesn't get turned on, so USB devices are not detected. This
affects the internal USB port on TrimSlice (i.e. the USB->SATA bridge, to
which the SSD is connected) and the external port(s) on Seaboard/
Springbank and Whistler.
The Tegra DT as written in v3.11 allows two paths to enable USB VBUS:
1) Via the legacy DT binding for the USB controller; it can directly
acquire a VBUS GPIO and activate it.
2) Via a regulator for VBUS, which is referenced by the new DT binding
for the USB controller.
Those two methods both use the same GPIO, and hence whichever of the
USB controller and regulator gets probed first ends up owning the GPIO.
In practice, the USB driver only supports path (1) above, since the
patches to support the new USB binding are not present until v3.12:-(
In practice, the regulator ends up being probed first and owning the
GPIO. Since nothing enables the regulator (the USB driver code is not
yet present), the regulator ends up being turned off. This originally
caused no problem, because the polarity in the regulator definition was
incorrect, so attempting to turn off the regulator actually turned it
on, and everything worked:-(
However, when testing the new USB driver code in v3.12, I noticed the
incorrect polarity and fixed it in commit 9f310de "ARM: tegra: fix VBUS
regulator GPIO polarity in DT". In the context of v3.11, this patch then
caused the USB VBUS to actually turn off, which broke USB ports with VBUS
control. I got this patch included in v3.11-rc1 since it fixed a bug in
device tree (incorrect polarity specification), and hence was suitable to
be included early in the rc series. I evidently did not test the patch at
all, or correctly, in the context of v3.11, and hence did not notice the
issue that I have explained above:-(
Fix this by making the USB VBUS regulators always enabled. This way, if
the regulator owns the GPIO, it will always be turned on, even if there
is no USB driver code to request the regulator be turned on. Even
ignoring this bug, this is a reasonable way to configure the HW anyway.
If this patch is applied to v3.11, it will cause a couple pretty trivial
conflicts in tegra20-{trimslice,seaboard}.dts when creating v3.12, since
the context right above the added lines changed in patches destined for
v3.12.
Reported-by: Kyle McMartin <kmcmarti@redhat.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
As Sergei Shtylyov explained in the #mipslinux IRC channel:
[Mon 2013-08-19 12:28:21 PM PDT] <headless> guys, are you sure it's not "DMA off stack" case?
[Mon 2013-08-19 12:28:35 PM PDT] <headless> it's a known stack corruptor on non-coherent arches
[Mon 2013-08-19 12:31:48 PM PDT] <DonkeyHotei> headless: for usb/ehci?
[Mon 2013-08-19 12:34:11 PM PDT] <DonkeyHotei> headless: explain
[Mon 2013-08-19 12:35:38 PM PDT] <headless> usb_control_msg() (or other such func) should not use buffer on stack. DMA from/to stack is prohibited
[Mon 2013-08-19 12:35:58 PM PDT] <headless> and EHCI uses DMA on control xfers (as well as all the others)
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
There is no need to get an interface specification if we know it's the
wrong one.
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Wladislav Wiebe [Mon, 12 Aug 2013 11:06:53 +0000 (13:06 +0200)]
of: fdt: fix memory initialization for expanded DT
Already existing property flags are filled wrong for properties created from
initial FDT. This could cause problems if this DYNAMIC device-tree functions
are used later, i.e. properties are attached/detached/replaced. Simply dumping
flags from the running system show, that some initial static (not allocated via
kzmalloc()) nodes are marked as dynamic.
I putted some debug extensions to property_proc_show(..) :
..
+ if (OF_IS_DYNAMIC(pp))
+ pr_err("DEBUG: xxx : OF_IS_DYNAMIC\n");
+ if (OF_IS_DETACHED(pp))
+ pr_err("DEBUG: xxx : OF_IS_DETACHED\n");
when you operate on the nodes (e.g.: ~$ cat /proc/device-tree/*some_node*) you
will see that those flags are filled wrong, basically in most cases it will dump
a DYNAMIC or DETACHED status, which is in not true.
(BTW. this OF_IS_DETACHED is a own define for debug purposes which which just
make a test_bit(OF_DETACHED, &x->_flags)
If nodes are dynamic kernel is allowed to kfree() them. But it will crash
attempting to do so on the nodes from FDT -- they are not allocated via
kzmalloc().
Signed-off-by: Wladislav Wiebe <wladislav.kw@gmail.com> Acked-by: Alexander Sverdlin <alexander.sverdlin@nsn.com> Cc: stable@vger.kernel.org Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Some Poulsbo cards seem to incorrectly report SDVO_CMD_STATUS_TARGET_NOT_SPECIFIED instead of SDVO_CMD_STATUS_PENDING, which causes the display to be turned off.
Linus Torvalds [Wed, 21 Aug 2013 23:38:33 +0000 (16:38 -0700)]
Merge tag 'stable/for-linus-3.11-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull Xen bug-fixes from Konrad Rzeszutek Wilk:
- On ARM did not have balanced calls to get/put_cpu.
- Fix to make tboot + Xen + Linux correctly.
- Fix events VCPU binding issues.
- Fix a vCPU online race where IPIs are sent to not-yet-online vCPU.
* tag 'stable/for-linus-3.11-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/smp: initialize IPI vectors before marking CPU online
xen/events: mask events when changing their VCPU binding
xen/events: initialize local per-cpu mask for all possible events
x86/xen: do not identity map UNUSABLE regions in the machine E820
xen/arm: missing put_cpu in xen_percpu_init
Linus Torvalds [Wed, 21 Aug 2013 23:37:14 +0000 (16:37 -0700)]
Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS fix from Ralf Baechle:
"Just a single patch which fixes a special case in the MIPS FPU
emulator which is always required, even on CPUs with FPU. There is
the rare special case that an FPU (or certain other instructions) in a
branch delay slot is causing an exception and then the branch
instruction will need to be emulated by the kernel before resuming
execution. This is working great except if the branch instruction is
an Octeon BBIT instruction.
The boring disclaimer - all MIPS defconfigs build tested and no
regressions and runtime tested on Octeon, no known issues"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MIPS: Handle OCTEON BBIT instructions in FPU emulator.
Linus Torvalds [Wed, 21 Aug 2013 23:36:32 +0000 (16:36 -0700)]
Merge tag 'arm64-stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64
Pull arm64 perf fixes from Catalin Marinas:
"Perf backend fixes for arm64 where the user can cause kernel panic
(discovered with Vince's fuzzing tool)"
* tag 'arm64-stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64:
arm64: perf: fix event validation for software group leaders
arm64: perf: fix array out of bounds access in armpmu_map_hw_event()
Linus Torvalds [Wed, 21 Aug 2013 23:35:37 +0000 (16:35 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Fixes for ARM and aarch64.
This pull request is coming a bit later than I would have preferred,
because I and Gleb happened to have holidays around the same weeks of
August... sorry about that"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: ARM: Squash len warning
arm64: KVM: use 'int' instead of 'u32' for variable 'target' in kvm_host.h.
arm64: KVM: add missing dsb before invalidating Stage-2 TLBs
arm64: KVM: perform save/restore of PAR_EL1
arm64: KVM: fix 2-level page tables unmapping
ARM: KVM: Fix unaligned unmap_range leak
ARM: KVM: Fix 64-bit coprocessor handling
Linus Torvalds [Wed, 21 Aug 2013 23:33:37 +0000 (16:33 -0700)]
Merge tag 'pinctrl-for-v3.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pinctrl fixes from Linus Walleij:
"Fixes for the sunxi (AllWinner) pin control driver. This was a new
driver in this merge window, so some post-merge hardening is
happening"
[ I had completely missed this pull request for some reason, it was sent
over a week ago but my mailbox is chaotic ]
* tag 'pinctrl-for-v3.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: sunxi: Add spinlocks
pinctrl: sunxi: Fix gpio_set behaviour
pinctrl: sunxi: Read register before writing to it in irq_set_type
Maxime Ripard [Thu, 25 Jul 2013 10:19:16 +0000 (12:19 +0200)]
ARM: sun7i: Add Cubieboard2 Device Tree
The Cubieboard2 is the successor of the first Cubieboard, and shares the
same hardware, except that the Allwinner A10 found initially has been
replaced by an Allwinner A20.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Maxime Ripard [Wed, 24 Jul 2013 22:10:53 +0000 (00:10 +0200)]
ARM: sun7i: a20-olinuxino: Enable UARTs muxing
Instead of relying on the bootloader to mux the UART pins properly, do
it on our own and register the rightful pins for the A20-olinuxino in
the DT using pinctrl.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Maxime Ripard [Wed, 24 Jul 2013 21:46:11 +0000 (23:46 +0200)]
ARM: sun7i: Add the PIO controller node to the DTSI
The PIO controller is responsible for the GPIO/muxing/external
interrupts handling. Now that we have support for the A20 pin set in the
pinctrl driver, we can start using it in the DTSI.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Maxime Ripard [Tue, 12 Mar 2013 21:16:05 +0000 (22:16 +0100)]
ARM: sunxi: dt: Add PIO controller to A31 DTSI
The A31 has a different set of pins than the one found on the A10 and
A13. Now that we have support for the A31 pin set in the pinctrl driver,
we can enable it in the DTSI with its own compatible.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Roland Dreier [Tue, 6 Aug 2013 00:55:01 +0000 (17:55 -0700)]
[SCSI] sg: Fix user memory corruption when SG_IO is interrupted by a signal
There is a nasty bug in the SCSI SG_IO ioctl that in some circumstances
leads to one process writing data into the address space of some other
random unrelated process if the ioctl is interrupted by a signal.
What happens is the following:
- A process issues an SG_IO ioctl with direction DXFER_FROM_DEV (ie the
underlying SCSI command will transfer data from the SCSI device to
the buffer provided in the ioctl)
- Before the command finishes, a signal is sent to the process waiting
in the ioctl. This will end up waking up the sg_ioctl() code:
result = wait_event_interruptible(sfp->read_wait,
(srp_done(sfp, srp) || sdp->detached));
but neither srp_done() nor sdp->detached is true, so we end up just
setting srp->orphan and returning to userspace:
srp->orphan = 1;
write_unlock_irq(&sfp->rq_list_lock);
return result; /* -ERESTARTSYS because signal hit process */
At this point the original process is done with the ioctl and
blithely goes ahead handling the signal, reissuing the ioctl, etc.
- Eventually, the SCSI command issued by the first ioctl finishes and
ends up in sg_rq_end_io(). At the end of that function, we run through:
write_lock_irqsave(&sfp->rq_list_lock, iflags);
if (unlikely(srp->orphan)) {
if (sfp->keep_orphan)
srp->sg_io_owned = 0;
else
done = 0;
}
srp->done = done;
write_unlock_irqrestore(&sfp->rq_list_lock, iflags);
if (likely(done)) {
/* Now wake up any sg_read() that is waiting for this
* packet.
*/
wake_up_interruptible(&sfp->read_wait);
kill_fasync(&sfp->async_qp, SIGPOLL, POLL_IN);
kref_put(&sfp->f_ref, sg_remove_sfp);
} else {
INIT_WORK(&srp->ew.work, sg_rq_end_io_usercontext);
schedule_work(&srp->ew.work);
}
Since srp->orphan *is* set, we set done to 0 (assuming the
userspace app has not set keep_orphan via an SG_SET_KEEP_ORPHAN
ioctl), and therefore we end up scheduling sg_rq_end_io_usercontext()
to run in a workqueue.
- In workqueue context we go through sg_rq_end_io_usercontext() ->
sg_finish_rem_req() -> blk_rq_unmap_user() -> ... ->
bio_uncopy_user() -> __bio_copy_iov() -> copy_to_user().
The key point here is that we are doing copy_to_user() on a
workqueue -- that is, we're on a kernel thread with current->mm
equal to whatever random previous user process was scheduled before
this kernel thread. So we end up copying whatever data the SCSI
command returned to the virtual address of the buffer passed into
the original ioctl, but it's quite likely we do this copying into a
different address space!
As suggested by James Bottomley <James.Bottomley@hansenpartnership.com>,
add a check for current->mm (which is NULL if we're on a kernel thread
without a real userspace address space) in bio_uncopy_user(), and skip
the copy if we're on a kernel thread.
There's no reason that I can think of for any caller of bio_uncopy_user()
to want to do copying on a kernel thread with a random active userspace
address space.
Huge thanks to Costa Sapuntzakis <costa@purestorage.com> for the
original pointer to this bug in the sg code.
Signed-off-by: Roland Dreier <roland@purestorage.com> Tested-by: David Milburn <dmilburn@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: <stable@vger.kernel.org> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Anton Blanchard [Thu, 8 Aug 2013 07:47:34 +0000 (17:47 +1000)]
[SCSI] lpfc: Don't force CONFIG_GENERIC_CSUM on
We want ppc64 to be able to select between optimised assembly
checksum routines in big endian and the generic lib/checksum.c
routines in little endian.
The lpfc driver is forcing CONFIG_GENERIC_CSUM on which means
we are unable to make the decision to enable it in the arch
Kconfig. If the option exists it is always forced on.
This got introduced in 3.10 via commit 6a7252fdb0c3 ([SCSI] lpfc:
fix up Kconfig dependencies). I spoke to Randy about it and
the original issue was with CRC_T10DIF not being defined.
As such, remove the select of CONFIG_GENERIC_CSUM.
Signed-off-by: Anton Blanchard <anton@samba.org> Cc: <stable@vger.kernel.org> # 3.10 Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Ben Hutchings [Tue, 9 Jul 2013 16:12:49 +0000 (17:12 +0100)]
sfc: Fix lookup of default RX MAC filters when steered using ethtool
commit 385904f819e3 ('sfc: Don't use
efx_filter_{build,hash,increment}() for default MAC filters') used the
wrong name to find the index of default RX MAC filters at insertion/
update time. This could result in memory corruption and would in any
case silently fail to update the filter.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Richard Genoud [Mon, 12 Aug 2013 12:31:00 +0000 (14:31 +0200)]
ARM: at91/dt: sam9x5ek: add WM8731 codec
The WM8731 codec on sam9x5ek board is on i2c, address 1A
Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Acked-by: Mark Brown <broonie@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
ARM: at91: at91sam9260: add missing pinctrl-names on mmc
pinctrl-names was missing causing mmc pinctrl to never be requested.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com>
[nicolas.ferre@atmel.com: added a commit message taken from Ludovic] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Toshiaki Makita [Tue, 20 Aug 2013 08:10:18 +0000 (17:10 +0900)]
bridge: Use the correct bit length for bitmap functions in the VLAN code
The VLAN code needs to know the length of the per-port VLAN bitmap to
perform its most basic operations (retrieving VLAN informations, removing
VLANs, forwarding database manipulation, etc). Unfortunately, in the
current implementation we are using a macro that indicates the bitmap
size in longs in places where the size in bits is expected, which in
some cases can cause what appear to be random failures.
Use the correct macro.
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>