Wei Yongjun [Mon, 17 Oct 2016 15:05:36 +0000 (15:05 +0000)]
staging: bcm2708_vchiq: fix return value check in vchiq_init_state()
In case of error, the function kthread_create() returns ERR_PTR() and
never returns NULL. The NULL test in the return value check should be
replaced with IS_ERR().
Wei Yongjun [Mon, 17 Oct 2016 15:06:07 +0000 (15:06 +0000)]
staging: bcm2708_vchiq: fix return value check in vchiq_platform_conn_state_changed()
In case of error, the function kthread_create() returns ERR_PTR() and
never returns NULL. The NULL test in the return value check should be
replaced with IS_ERR().
Eric Anholt [Mon, 17 Oct 2016 19:44:05 +0000 (12:44 -0700)]
staging/vchi: Add a TODO file of things I know we need to deal with.
I've left out the downstream HDMI audio driver from the "to be
imported" section, as we'll want to handle it natively in vc4. The
downstream kernel will likely continue to use that driver for a while
due to using the interim "vc4 firmware KMS" mode while vc4 gets its
featureset (such as HDMI audio!) completed.
I've also left out VC-CMA, which appears to be about having Linux
manage a CMA area that the firmware gets to make allocations out of.
I'm not clear on if this is useful (the firmware's need for memory
drops massively with vc4 present, and may drop even more depending on
how we resolve dmabuf handling for camera and video decode)
Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Mon, 17 Oct 2016 22:08:56 +0000 (00:08 +0200)]
staging: lustre: remove broken dead code in cfs_cpt_table_create_pattern
After a recent bugfix, we get a warning about the use of an uninitialized
variable:
drivers/staging/lustre/lnet/libcfs/linux/linux-cpu.c: In function 'cfs_cpt_table_create_pattern':
drivers/staging/lustre/lnet/libcfs/linux/linux-cpu.c:833:7: error: 'str' may be used uninitialized in this function [-Werror=maybe-uninitialized]
This part of the function used to not do anything as we would reassign
the 'str' pointer to something else right away, but now we pass an
uninitialized pointer into 'strchr', which can cause a kernel page fault
or worse.
Fixes: 239fd5d41f9b ("staging: lustre: libcfs: shortcut to create CPT from NUMA topology") Cc: Liang Zhen <liang.zhen@intel.com> Cc: James Simmons <jsimmons@infradead.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Mon, 17 Oct 2016 22:42:27 +0000 (00:42 +0200)]
staging: lustre: restore initialization of return code
A recent rework dropped the initialization of the initialization of the
successful return code in lov_getstripe:
drivers/staging/lustre/lustre/lov/lov_pack.c: In function 'lov_getstripe':
drivers/staging/lustre/lustre/lov/lov_pack.c:426:9: error: 'rc' may be used uninitialized in this function [-Werror=maybe-uninitialized]
drivers/staging/lustre/lustre/lov/lov_pack.c:313:6: note: 'rc' was declared here
If the driver is built as a module, autoload won't work because the module
alias information is not filled. So user-space can't match the registered
device with the corresponding module.
Export the module alias information using the MODULE_DEVICE_TABLE() macro.
Before this patch:
$ modinfo drivers/staging/fbtft/flexfb.ko | grep alias
$
After this patch:
$ modinfo drivers/staging/fbtft/flexfb.ko | grep alias
alias: platform:flexpfb
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stuart Yoder [Mon, 17 Oct 2016 18:43:01 +0000 (13:43 -0500)]
staging: fsl-mc: dprc: shorten DPRC interrupt name
improve readibility of the DPRC interrupt name in sysfs by
shortening this and just using the device name. There is only
one interrupt DPRC used, so no further differentiation is needed.
Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stuart Yoder [Mon, 17 Oct 2016 18:42:53 +0000 (13:42 -0500)]
staging: fsl-mc: irq: shorten name of interrupt name
For /proc/interrupts readability, platform bus MSIs are named
"ITS-pMSI" in the GIC ITS implementation for that bus. Follow
a similar naming convention and call fsl-mc bus MSIs
"ITS-fMSI".
Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stuart Yoder [Mon, 17 Oct 2016 18:42:40 +0000 (13:42 -0500)]
staging: fsl-mc: update Kconfig dependency
The Kconfig dependency previously included ARM64, which is not
strictly correct. Change it to ARCH_LAYERSCAPE which is the
SoC platform that includes the DPAA2 hardware.
Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stuart Yoder [Mon, 17 Oct 2016 18:42:34 +0000 (13:42 -0500)]
staging: fsl-mc: clean up Kconfig description
Except for copyrights we are avoiding all references
to Freescale, which no longer exists as a brand. Cleanup
Freescale references and simplify the Kconfig description
of the fsl-mc bus.
Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stuart Yoder [Mon, 17 Oct 2016 18:42:28 +0000 (13:42 -0500)]
staging: fsl-mc: add missing includes to fsl-mc-private.h
fsl-mc-private.h references several definitions that it does not explicitly
have includes for. Up until now we've gotten lucky due to include ordering
that things compile. Add the missing includes.
Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The rtllib_rx_extract_addr() is supposed to set up the mac addresses
for four possible cases, based on two bits of input data. For
some reason, gcc decides that it's possible that none of the these
four cases apply and the addresses remain uninitialized:
drivers/staging/rtl8192e/rtllib_rx.c: In function ‘rtllib_rx_InfraAdhoc’:
include/linux/etherdevice.h:316:61: error: ‘*((void *)&dst+4)’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
drivers/staging/rtl8192e/rtllib_rx.c:1318:5: note: ‘*((void *)&dst+4)’ was declared here
ded from /git/arm-soc/drivers/staging/rtl8192e/rtllib_rx.c:40:0:
include/linux/etherdevice.h:316:36: error: ‘dst’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
drivers/staging/rtl8192e/rtllib_rx.c:1318:5: note: ‘dst’ was declared here
This warning is clearly nonsense, but changing the last case into
'default' makes it obvious to the compiler too, which avoids the
warning and probably leads to better object code too.
As the same warning appears in other files that have the exact
same code, I'm fixing it in both rtl8192e and rtl8192u, even
though I did not observe it for the latter.
Pankaj Bharadiya [Mon, 17 Oct 2016 10:47:07 +0000 (16:17 +0530)]
staging: dgnc: Remove some redundant functions
dgnc_tty_preinit() and dgnc_tty_post_uninit() functions are used to
allocate and free "dgnc_TmpWriteBuf" and this "dgnc_TmpWriteBuf" is
not really getting used. Hence remove these redundant functions.
Also remove dgnc_TmpWriteBuf variable as it is not used anymore.
Pankaj Bharadiya [Mon, 17 Oct 2016 09:12:36 +0000 (14:42 +0530)]
staging: greybus: audio: remove redundant slot field
gb_audio_manager_module_descriptor's intf_id field maintains the
information about the interface on which module is connected hence
having an extra slot field is redundant.
Thus remove the slot field and its associated code.
Michael Zoran [Wed, 19 Oct 2016 22:58:54 +0000 (15:58 -0700)]
staging: vc04_services: Add casts to remove warnings in vchiq_core.c
When compiling vchiq_core.c for 64 bit, the compiler
emits a few warnings that are not actual issues. This
change adds a few casts to remove the extra unnecessary
warnings.
Signed-off-by: Michael Zoran <mzoran@crowfest.net> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Zoran [Wed, 19 Oct 2016 22:58:48 +0000 (15:58 -0700)]
staging: vc04_services: Handle conversion from VCHIQ_SERVICE_HANDLE_T to VCHI_SERVICE_HANDLE_T
A VCHIQ_SERVICE_HANDLE_T which is an int is stuffed into a
VCHI_SERVICE_HANDLE_T which is a pointer, passed around, then
converted back to a VCHIQ_SERVICE_HANDLE_T. Since the data is
always actually a VCHIQ_SERVICE_HANDLE_T(int), never actually a
pointer, it is safe to simply cast the two back in forth.
Note that pointers are never stuffed into an int.
Signed-off-by: Michael Zoran <mzoran@crowfest.net> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Zoran [Wed, 19 Oct 2016 22:58:34 +0000 (15:58 -0700)]
staging: vc04_services: Convert pointers in shared state to offsets
The arm processor core and the GPU have a shared data structure.
This structure contains pointers to base linux kernel objects such as
events. The size of the pointer changes between 32 bit and 64 bit,
so it is necessary to convert these pointers to offsets from the
beginning of the state structure.
Luckly, the GPU does not interpret these pointers/offsets,
but this change is necessary to keep the structure the same since
the GPU code is outside the scope of the linux kernel
and can't be easily changed.
Signed-off-by: Michael Zoran <mzoran@crowfest.net> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Zoran [Wed, 19 Oct 2016 22:58:27 +0000 (15:58 -0700)]
staging: vc04_services: Change fields of page list structure to fixed length
The arm processor core and the GPU have shared data structures.
One of these structures is a list of pages of data for messages.
This structure can not change since it is dependent on the GPU
firmware which is external to the kernel. Convert the fields
of this structure to fixed length fields.
Signed-off-by: Michael Zoran <mzoran@crowfest.net> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Zoran [Wed, 19 Oct 2016 22:58:09 +0000 (15:58 -0700)]
staging: vc04_services: Convert dsb() to dsb(sy)
The dsb() macro for 32 arm compiles to dsb(sy) in the binary file.
This macro is no longer supported on arm64, so instead use dsb(sy)
which is completely binary compatible.
Signed-off-by: Michael Zoran <mzoran@crowfest.net> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge tag 'iio-for-4.10a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
First round of IIO new device support, features and cleanups for the 4.10 cycle.
Fair number of outreachy related patches in here. Some of these may well
have already been picked up by Greg but git will sort that out for us.
Also some good staging cleanup work from other sources. Thanks Brian and Lars
in particular for this.
New device support
* ACCES 104-quad-8
- New driver for this 8 channel encoder input board. Lots of new ABI with
this one.
* AD7766
- New driver supporting AD7766, AD7766-1, AD7766-2, AD7767, AD7767-1 and
AD7767-2 24 bit ADCs.
* dmard 10
- New driver for this 3 axis accelerometer.
* Honeywell ABP pressure sensors.
- New driver covering 56 parts in this series (too many to list here!)
* HTS221
- New driver to support this relative humidiy and temperature device.
* LMP91000
- New driver for this potentiostat (form of chemical sensor). Nice example
of use of the buffered consumer interfaces and the use of a consumer
provided trigger.
* MiraMEMS DA311
- New driver for this 3 axis accelerometer.
* MiraMEMS DA280
- New driver for this 3 axis accelerometer. Follow up caught up with
vendor prefixes for these.
Staging graduations
* isl29018 light sensor
- Fixes and cleanups listed below (thanks for your hard work on this Brian!)
* sca3000
- Fixes and cleanups listed below. This was one of the small set of drivers
that went into staging when IIO was first added. Turns out it had a few
bugs and needed to be brought into the modern era! Not clear if I am
the only person who actually has one of these still wired to a board.
New features (Core)
- Add an iio_trigger_validate_own_device helper which relies on the device
and trigger having the same parent. Convenient to have this for some
of the more complex trigger / device interactions. Was hand rolled in
a few drivers already so good to bring it into the core.
- Add an iio_read_channel_offset in kernel access helper (similar to
the existing one for scale).
- IIO_ATTR_{RO, WO, RW} and IIO_DEVICE_ATTR_{RO, WO, RW} macros. These
lead some rather contrived function naming, but there is no denying they
do reduced boilerplate. I'm going to resist their introduction in
drivers 'unless' they form part of a larger set of cleanups.
- Counter channel type and index type.
New features (Drivers)
* hdc100x
- Triggered buffer support.
* mcp4725
- Device tree bindings and support.
- Voltage reference selection.
* ti-adc0832
- Triggered buffer support.
* ti-adc161s626
- Add regulator support allowing _scale and _offset values to be established
and exported.
New features (Tools)
* iio_generic_buffer
- -A option to force enable all channels rather than faulting if some are
already enabled (like -a does). Followup patches tidied this support up.
Cleanups (Core)
- Use kmalloc_array in iio_scan_mask_set.
- Take event_attrs field of iio_info structure constant
- Staging todo list updates. Most of it was long done.
- MAINTAINERS had a wrong directory listing.
Cleanups (Drivers)
* Missing i2c trivial devices entries.
* ad5592r
- Fix an endian type related sparse warnings.
* ad7150
- Constify the event attribute_group structures.
* ad7152
- Add some blank lines to improve readability.
- Sampling frequency control via chan-info element rather than hand rolled
attributes.
- add a new lock to avoid use of mlock for non state change related locking.
* ad7280
- Constify atrribute_group structure (second patch covers the event ones)
* ad7606 (Lars is driving most of the cleanup on this with some additions from
Eva)
- Fix improper setting of oversampling pins. This has been broken a very
long time in this staging driver, so not going to push this back to stable.
- Implement oversampling configuration via the chan_info mask element.
- Remove an unused int_vref_mv field.
- Remove a reundant name field from ad7606_chip_info.
- Remove default device configuration from platform_data in favour of
whatever the power on defaults are.
- Remove out of band error reporting in the kernel log as not providing
much information.
- Fix oversampling ratio by having 1 be the value for no oversampling.
- Avoid allocating buffer for each data capture.
- Factor out common code between periodic and one-shot capture.
- Move set_drvdat into common code.
- Let the common probe function return int rather than jumping through
an ERR_PTR.
- Pass struct device * into common remove to simplify code.
- Always run trigger handler only once per event (no one can remember why
it was being possibly done twice).
- Move over to the GPIO descriptor API to shorten and clarify code.
- Move the buffer code into the main file as it's not optional and is
now rather short in this driver.
- Fix the naming of the supply regulator.
- Rework regulator handling to handle errors including deferred probing.
- Tidy up a ptr_err or 0 return.
* ad7746
- Sampling frequency control via info_mask element rather than hand rolled
* ad7758
- Sampling frequency control via info_mask element rather than hand rolled
attributes.
* ad7816
- Constify the event attribute_group structure.
* adt7316
- Constify the event attribute group structures.
* ak8974
- Cleanup some sparse warnings about endian types.
* ak8975
- Cleanup some sparse warnings about endian types.
* bmi160
- Spare endian warning cleanups.
* isl29018 (towards staging graduation)
- Remove unusedvariables and defines.
- Improve consistency of error handling.
- Signed / unsigned comparison fixes.
- Use the IIO_DEVICE_ATTR_{RO, RW} macros
- Fix a race in in_illuminance_scale_available_show.
- Cleanup exit points of _read_raw
- Sanity check if in suspended state during a write_raw call as was already
done for read_raw.
- Document device tree bidnings.
- Document infrared supression controls.
- Add some newlines to improve readability and drop one that shouldn't be
there.
- Fix a poorly named functions name.
- Fix multiline coment syntax.
- Tidy up a pair or return statements by unifying them.
- Rename description in Kconfig for consistency with similar drivers.
* lidar
- cleanup power management by dropping unnecessary call.
* ltr501
- Use the claim_direct_mode helpers. Fix a race condition along the way.
* max1027
- Fix a dubious x | !y sparse warning.
- Use the new iio_trigger_validate_own_device helper.
* max440000
- Clean up some sparse warnings about endian types.
* mcp4725
- Use the regulator framework to establish the reference voltage rather than
getting it from platform data.
- Tidy up a comment typo.
- Fix a wrong PTR_ERR query (wrong regulator).
* mma7660
- Take a mma7660_nscale static.
* mma8452
- Use the new iio_trigger_validate_own_device helper.
- Use claim_direct_mode helpers - fix a race condition along the way.
* mpl3115
- Use claim_direct_mode helpers - fix a race condition along the way.
* ms65611
- Tidy up regulator error handling and clean out a static warning in the mix.
* sca3000
- Avoid a potential unitialized variable if a hardware read returns a value
that isn't actually supported (mostly warning supression).
- Fix a use before setting of the indio_dev->buffer pointer. Broken for
a very long time so not going to rush this into stable.
- Merge buffer file with core file. We used to always split these.
Sometimes it's just not worth the hassle. In this case the device's main
feature is it's hardware fifos so unlikely anyone would want to run it
without.
- Drop the sca3000_register_ring_funcs function as it's a pointless wrapper
once we have only one file.
- Fix cleaning of flag + setting of size of scan. Without this you can't
start the buffer twice and expect sensible (or any) results. Again,
broken for a long time so not heading for stable.
- Drop the custom watershed setting ABI - for now we'll just support one
value.
- Move to a hybrid hard / soft buffer design (how we've been doing it
for similar devices for a while now!)
- Cleanup some unusued variables.
- Use a fake channel to support core handling of freefall event registration.
- Cleanup the register defines.
- Fix an off by one error in axis due to IIO_NO_MOD taking up the 0 value.
Been broken since first admission of IIO to the staging tree.
- Add readback of the 3db low pass filter frequency and later writing
allowing droppign of custom measurement mode attributes as they can
be represented by the filter choices that is their main characteristic.
- Drop non standard revision attr and replace with dev_info on probe.
- Avoid a race in probe.
- Various formatting fixes.
- Kernel-docify docs that were very nearly in the write format.
* tsl2583
- Constify attribute_group structure.
* zpa2326
- Drop a redundant DEBUG ifdef.
Cleanups (Tools)
* iio_generic_buffer
- Fix the ? arguement. Previously it sort of worked as you got the help
message as a result of it not recognising the arguement.
Matt Ranostay [Sat, 15 Oct 2016 18:04:37 +0000 (11:04 -0700)]
iio: proximity: pulsedlight-lidar-lite-v2: cleanup power management
Remove pm_runtime_mark_last_busy() call that wasn't need in the probe
since the device should be put to sleep.
Clarification from Matt:
Basically it going to be suspended once pm_runtime_idle() is called,
and setting the last busy is useless and not needed.
Clearly this doesn't affect the device running but just makes the code
more consistent with other uses.
Signed-off-by: Matt Ranostay <matt@ranostay.consulting> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Tomas Novotny [Tue, 18 Oct 2016 17:43:08 +0000 (19:43 +0200)]
iio: dac: mcp4725: support voltage reference selection
MCP47x6 chip supports selection of a voltage reference (VDD, VREF buffered
or unbuffered). MCP4725 doesn't have this feature thus the eventual setting
is ignored and user is warned.
The setting is stored only in the volatile memory of the chip. You need to
manually store it to the EEPROM of the chip via 'store_eeprom' sysfs entry.
Signed-off-by: Tomas Novotny <tomas@novotny.cz> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Currently, this driver ignores all errors from regulator_get(). The way
it is now, it also breaks probe deferral (EPROBE_DEFER). The correct
behavior is to propagate the error to the upper layers so they can
handle it accordingly.
Rework the regulator handling so that it matches the standard behavior.
If the specific design uses a static always-on regulator and does not
explicitly specify it, regulator_get() will return the dummy regulator.
Suggested-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
staging: iio: ad7606: set proper supply name to devm_regulator_get()
The name passed to devm_regulator_get() should match the name of the
supply as specified in the device datasheet. The supply on this device
is called 'AVcc' while currently, the driver uses just 'vcc'.
Use 'avcc' to specify the supply voltage since it is custom to use the
lower-caps version of the datasheet name.
Suggested-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
staging:iio:ad7606: Move buffer code to main source file
Currently the ad7606 buffer handling code resides in its own source file.
But this file contains only 4 small functions of which half are just
wrappers around other functions. Buffer support is also always enabled for
this driver, so move them over to the main source file. This reduces the
amount of boilerplate code.
Also rename the main function from ad7606_core.c to ad7606.c since there is
only a single file now.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
staging:iio:ad7606: Run trigger handler only once per trigger event
Currently the ad7606 driver installs the same function for the hard-irq and
threaded trigger handlers. This was introduced in commit 1caf7cb46135
("staging:iio:adc:ad7606 Convert to new channel registration method Update
Add missing call to iio_trigger_notify_done() Set pollfunc top and bottom
half handler"). Unfortunately the commit message does not mention why this
was done and Michael does not remember either.
Since the trigger handler function is idempotent (set a GPIO to 1) running
it twice does not do any harm, but is simply not necessary either. So set
the threaded trigger handler for the driver to NULL.
While we are at it also remove the function description comment that does
no say anything that can't be derived from the function name itself.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
staging:iio:ad7606: Let common remove function take a struct device *
Currently the common remove function takes a struct iio_dev *. This
parameter is retrieved by the individual driver remove functions by calling
get_drvdata() on their device. To simplify the code let the common remove
function directly take a struct dev * and do the IIO device in retrieval
the common remove function.
This also aligns the interface with the common probe function.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
staging:iio:ad7606: Let the common probe function return int
The common probe function for the ad7606 currently returns a struct iio_dev
pointer. The returned value is not used by the individual driver probe
functions other than for error checking.
Let the common probe function return a int instead to report the error
value directly (or 0 on success). This allows to simplify the code.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
staging:iio:ad7606: Move set_drvdata() into common code
Both the platform_device and SPI driver call set_drvdata() at the end of
their probe function. Move this into the common probe() function to reduce
duplicated code.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
staging:iio:ad7606: Factor out common code between periodic and one-shot capture
Both the periodic buffer based and one-shot sysfs based capture methods
share a large portion of their code. Factor this out into a common helper
function.
Also provide a comment that better explains in more detail what is going on
in the capture function.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
staging:iio:ad7606: Avoid allocating buffer for each data capture
Currently the ad7606 driver dynamically allocates and frees a transfer
buffer each time a sample capture is performed in buffered mode, which
introduces unnecessary overhead. The driver state struct already contains a
buffer that is used for transfers in one-shot mode. This buffer is large
enough to hold all samples, but not the timestamp that might be present in
buffered mode. Extend the buffer size to be able to contain the timestamp
and update the buffered capture function to use this buffer.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
staging:iio:ad7606: Use oversampling ratio of 1 for no oversampling
Currently the ad7606 driver uses a value of 0 for the oversampling ratio to
express that no oversampling is done. Strictly speaking this means though
that no data capture is done at all. Instead change the driver to use a
value of 1, this is in accordance with what other drivers do and what the
IIO spec suggests.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Currently the ad7606 driver prints a error message to the kernel log when
an application writes an invalid value to a sysfs attribute. While for
initial driver development and testing this might be useful it is quite
disadvantageous in a production environment. The write() call to the sysfs
attribute will already return an error if the value was invalid so the
application is aware that the operation failed. And generally speaking it
is impossible for an application to reliably match a log message in the
kernel log to a specific operation it performed, so the message becomes
just noise and might distract from more critical messages.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
staging:iio:ad7606: Remove default device configuration from platform data
While for some very selected setups it might be useful to be able to
provide default configuration data via the platform data, generally this
becomes very impractical as the number of configuration options increases.
So the general policy is to use the power-on default values of the device
and let the application using the device configure it according to its
needs.
Implement this scheme for the ad7606 driver by removing support for
specifying a default configuration via the platform data.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
staging:iio:ad7606: Remove redundant name field from ad7606_chip_info
The name field in the ad7606_chip_info struct is set to the same value as
the as the name field in the corresponding {platform,spi}_device_id table
entry. Remove it from the ad7606_chip_info struct and pass the name from
the ID to the probe function. This slightly reduces the size of the
chip_info table and adding new entries requires less boilerplate.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
staging:iio:ad7606: Remove unused int_vref_mv field
Remove the int_vref_mv field from the ad7606_chip_info struct since the
field is never used by the driver. The value is also the same for all
derivatives of this chip, so if it will ever be used in the driver a
constant value will work just fine.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
tools: iio: iio_generic_buffer: drop unneeded parentheses
Remove extra parentheses introduced in commit <73e176a tools: iio:
iio_generic_buffer: add -A to force-enable all channels>.
Suggested-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
tools: iio: iio_generic_buffer: rename and change type of force variable
Replace the type of 'force' flag from int to bool and at the same time
rename it to 'force_autochannels' for better readability.
Suggested-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Alison Schofield [Sun, 16 Oct 2016 05:02:19 +0000 (22:02 -0700)]
iio: light: ltr501: claim direct mode during raw writes
Driver was checking for direct mode but not locking it. Use
claim/release helper functions to guarantee the device stays
in direct mode during all raw write operations.
Signed-off-by: Alison Schofield <amsfield22@gmail.com> Acked-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Alison Schofield [Sun, 16 Oct 2016 05:00:53 +0000 (22:00 -0700)]
iio: light: ltr501: claim direct mode during select raw reads
Driver was checking for direct mode but not locking it. Use
claim/release helper functions to guarantee the device stays
in direct mode during required raw read cases.
Signed-off-by: Alison Schofield <amsfield22@gmail.com> Acked-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
staging:iio:accel:sca3000 Tidy up probe order to avoid a race.
Previously the device was exposed to userspace and in kernel consumers
before the interrupts had been configured. As nothing stopped them being
enabled in the interval this could cause unhandled interrupts.
Signed-off-by: Jonathan Cameron <jic23@kernel.org> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
staging:iio:accel:sca3000 replace non standard revision attr with dev_info on probe
There seems little point in being able to query the part revision number
via sysfs. Hence just put it in the kernel logs during probe incase
anyone ever wants to know.
Signed-off-by: Jonathan Cameron <jic23@kernel.org> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
staging:iio:accel:sca3000 Drop custom measurement mode attributes
This is now represented by the standard 3db filter frequency controls.
Things get complex wrt to the sampling frequency as these modes change
but that is fine under the IIO ABI where any value is allowed to effect
any other.
Signed-off-by: Jonathan Cameron <jic23@kernel.org> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
staging:iio:accel:sca3000 Add write support to the low pass filter control
Also includes an available attribute. The ordering of values appears
a bit random, but as the ABI doesn't specify this and we already have
both rising and falling lists I think this is fine.
Signed-off-by: Jonathan Cameron <jic23@kernel.org> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
staging:iio:accel:sca3000 Clean up register defines.
Introduce some more masks and generally drive towards consistent naming.
Note the small indents used to indicate parts of registers + parts of
multiplexed registers.
Signed-off-by: Jonathan Cameron <jic23@kernel.org> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
staging:iio:accel:sca3000 use a 'fake' channel to handle freefall event registration.
This is an approach used in some newer drivers as it exposes the
compound channel events to the core rather than hiding their control
in sysfs attributes entirely via the driver.
Signed-off-by: Jonathan Cameron <jic23@kernel.org> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
staging:iio:accel:sca3000 move to hybrid hard / soft buffer design.
In a similar fashion to other newer drivers (e.g. ti_am335x), instead
of using the hardware buffer support in IIO to directly access the hardware
fifo, insert a software fifo and feed that from the hardware one when
interrupts occur. This gives a simpler structure to the data flows and
allows more flexibility over how often data is shipped to userspace etc.
This was also the only direct user of the simplistic generalization found
in ring_hw.h so that header is removed.
Signed-off-by: Jonathan Cameron <jic23@kernel.org> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
In the early days of IIO we were much more inclined to keep the impact
of the core IIO elements to the minimum. As time has moved on it has
become clear that hardly any builds are done without buffer support
and that it adds considerable complexity to the drivers.
Hence merge down the buffer and non buffer elements of the sca3000 driver
also allowing us to drop the header file used for the interfaces between
the two.
Signed-off-by: Jonathan Cameron <jic23@kernel.org> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Brian Masney [Mon, 10 Oct 2016 07:20:01 +0000 (03:20 -0400)]
staging: iio: isl29018: add ABI documentation for infrared suppression
Add ABI documentation from the ISL29018 Data Sheet (FN6619.4, Oct 8,
2012) about the infrared suppression that can be controlled
with the proximity_on_chip_ambient_infrared_suppression sysfs attribute.
Signed-off-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Alison Schofield [Tue, 11 Oct 2016 19:33:12 +0000 (12:33 -0700)]
iio: pressure: mpl3115: claim direct mode during raw reads
Driver was checking for direct mode but not locking it. Use
claim/release helper functions to guarantee the device stays
in direct mode during raw reads.
Signed-off-by: Alison Schofield <amsfield22@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Jonathan Cameron [Sat, 15 Oct 2016 14:55:06 +0000 (15:55 +0100)]
iio: accel: mma8452: claim direct mode during write raw
Driver was checking for direct mode but not locking it. Use
claim/release helper functions to guarantee the device stays
in direct mode during all write raw operations.
Signed-off-by: Alison Schofield <amsfield22@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Alison Schofield [Tue, 11 Oct 2016 19:31:36 +0000 (12:31 -0700)]
iio: accel: mma8452: claim direct mode during raw reads
Driver was checking for direct mode but not locking it. Use
claim/release helper functions to guarantee the device stays
in direct mode during raw reads.
Signed-off-by: Alison Schofield <amsfield22@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
tools: iio: iio_generic_buffer: add -A to force-enable all channels
If attribute/s is/are already enabled (by default or via scripts or
manual interaction), issuing -a will fail to enable the channels thereby
one has to manually disable the said attribute/s before proceeding with
auto-enabling.
Add a command-line option -A to force-activate all channels regardless
of their current state.
Suggested-by: Alison Schofield <amsfield22@gmail.com> Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Change in handling of the regulator description means that static
checkers correctly assume we could be using dereferenced pointer to the
regulator. In reality we will never get the -ENODEV error, as current
behavior flow does not predict it, because:
If the device tree or board file does not define suitable regulators for
the component, it will be substituted by a dummy regulator, or, if
regulators are disabled altogether, by stubs.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Suggested-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Crt Mori <cmo@melexis.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
sayli karnik [Tue, 11 Oct 2016 11:37:21 +0000 (17:07 +0530)]
iio: bmi160_core: Fix sparse warning due to incorrect type in assignment
There is a type mismatch between the buffer which is of type s16 and the
samples stored, which are declared as __le16.
Fix the following sparse warning:
drivers/iio/imu/bmi160/bmi160_core.c:411:26: warning: incorrect type
in assignment (different base types)
drivers/iio/imu/bmi160/bmi160_core.c:411:26: expected signed short
[signed] [short] [explicitly-signed] <noident>
drivers/iio/imu/bmi160/bmi160_core.c:411:26: got restricted __le16
[addressable] [usertype] sample
This is a cosmetic-type patch since it does not alter code behaviour.
The le16 is going into a 16bit buf element, and is labelled as IIO_LE in the
channel buffer definition.
Signed-off-by: sayli karnik <karniksayli1995@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Brian Masney [Mon, 10 Oct 2016 07:19:58 +0000 (03:19 -0400)]
staging: iio: isl29018: combine two return statements into one
Use the return value from isl29018_set_integration_time() as the return
value for isl29018_chip_init() since this is the last piece of work
inside that function.
Signed-off-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>