Eric Dumazet [Tue, 19 Feb 2013 18:42:03 +0000 (10:42 -0800)]
ppp: set qdisc_tx_busylock to avoid LOCKDEP splat
If a qdisc is installed on a ppp device, its possible to get
a lockdep splat under stress, because nested dev_queue_xmit() can
lock busylock a second time (on a different device, so its a false
positive)
Avoid this problem using a distinct lock_class_key for ppp
devices.
Reported-by: Yanko Kaneti <yaneti@declera.com> Tested-by: Yanko Kaneti <yaneti@declera.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Cong Wang [Tue, 19 Feb 2013 02:47:05 +0000 (02:47 +0000)]
net: fix a build failure when !CONFIG_PROC_FS
When !CONFIG_PROC_FS dev_mcast_init() is not defined,
actually we can just merge dev_mcast_init() into
dev_proc_init().
Reported-by: Gao feng <gaofeng@cn.fujitsu.com> Cc: Gao feng <gaofeng@cn.fujitsu.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Gao feng [Tue, 19 Feb 2013 00:43:10 +0000 (00:43 +0000)]
net: proc: fix build failed when procfs is not configured
commit d4beaa66add8aebf83ab16d2fde4e4de8dac36df
"net: proc: change proc_net_fops_create to proc_create"
uses proc_create to replace proc_net_fops_create, when
CONFIG_PROC isn't configured, some build error will
occurs.
net/packet/af_packet.c: In function 'packet_net_init':
net/packet/af_packet.c:3831:48: error: 'packet_seq_fops' undeclared (first use in this function)
net/packet/af_packet.c:3831:48: note: each undeclared identifier is reported only once for each function it appears in
There may be other build fails like above,this patch
change proc_create from function to macros when CONFIG_PROC
is not configured,just like what proc_net_fops_create did
before this commit.
Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
But this is wrong from all we can tell, we discussed this before
(Wei pointed to the discussion in an earlier reply). The core of
it is that the put here parallels the one in netbk_tx_err(), and
the one in xenvif_carrier_off() matches the get from
xenvif_connect() (which normally would be done on the path
coming through xenvif_disconnect()).
====================
Trond Myklebust [Tue, 19 Feb 2013 17:04:42 +0000 (12:04 -0500)]
NLM: Ensure that we resend all pending blocking locks after a reclaim
Currently, nlmclnt_lock will break out of the for(;;) loop when
the reclaimer wakes up the blocking lock thread by setting
nlm_lck_denied_grace_period. This causes the lock request to fail
with an ENOLCK error.
The intention was always to ensure that we resend the lock request
after the grace period has expired.
Harninder Rai [Tue, 19 Feb 2013 09:13:58 +0000 (14:43 +0530)]
powerpc/85xx: bsc9131 - Correct typo in SDHC device node
BSC9131RDB doesn't have SDHC enabled. As a result of this typo,
the node was not getting disabled from the device tree which was
leading to linux hang during bootup
Signed-off-by: Harninder Rai <harninder.rai@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Ben Hutchings [Tue, 19 Feb 2013 00:24:26 +0000 (02:24 +0200)]
kbuild: Fix missing '\n' for NEW symbols in yes "" | make oldconfig >conf.new
According to Documentation/kbuild/kconfig.txt, the commands:
yes "" | make oldconfig >conf.new
grep "(NEW)" conf.new
should list the new config symbols with their default values.
However, currently there is no line break after each new symbol. When
kconfig is interactive the user will type a new-line at this point,
but when non-interactive kconfig must print it.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Reference: http://bugs.debian.org/636029
[regid23@nt1.in: Adjusted Ben's work to apply cleanly to this tree] Reported-and-tested-by: Regid Ichira <regid23@nt1.in> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
Mathias Krause [Tue, 5 Feb 2013 17:19:14 +0000 (18:19 +0100)]
crypto: user - fix empty string test in report API
The current test for empty strings fails because it is testing the
address of a field, not a pointer. So the test will always be true.
Test the first character in the string to not be null instead.
Mathias Krause [Tue, 5 Feb 2013 17:19:13 +0000 (18:19 +0100)]
crypto: user - fix info leaks in report API
Three errors resulting in kernel memory disclosure:
1/ The structures used for the netlink based crypto algorithm report API
are located on the stack. As snprintf() does not fill the remainder of
the buffer with null bytes, those stack bytes will be disclosed to users
of the API. Switch to strncpy() to fix this.
2/ crypto_report_one() does not initialize all field of struct
crypto_user_alg. Fix this to fix the heap info leak.
3/ For the module name we should copy only as many bytes as
module_name() returns -- not as much as the destination buffer could
hold. But the current code does not and therefore copies random data
from behind the end of the module name, as the module name is always
shorter than CRYPTO_MAX_ALG_NAME.
Also switch to use strncpy() to copy the algorithm's name and
driver_name. They are strings, after all.
Vivien Didelot [Tue, 22 Jan 2013 17:01:21 +0000 (12:01 -0500)]
HID: add ThingM blink(1) USB RGB LED support
The ThingM blink(1) is an open source hardware USB RGB LED. It contains
an internal EEPROM, allowing to configure up to 12 light patterns. A
light pattern is a RGB color plus a fade time. This driver registers a
LED class instance with additional sysfs attributes to support basic
functions such as setting RGB colors, fade and playing. Other functions
are still accessible through the hidraw interface.
At this time, the only documentation for the device is the firmware
source code from ThingM, plus a few schematics. They are available at:
https://github.com/todbot/blink1
This patch is version 3. It updates the name of the source file, the
driver and the led sysfs entry, according to comments from Jiri Kosina
and Simon Wood.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Doug Goldstein [Mon, 18 Feb 2013 14:59:23 +0000 (14:59 +0000)]
bonding: set sysfs device_type to 'bond'
Sets the sysfs device_type to 'bond' for udev. This allows udev rules to
be created for bond devices. This is similar to how other network
devices set their device_type.
Signed-off-by: Doug Goldstein <cardoe@cardoe.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes the following inconsistencies in bond_release_all:
- IFF_BONDING flag is not stripped from slaves
- MTU is not restored
- no netdev notifiers are sent
Instead of trying to keep bond_release and bond_release_all in sync
I think we can re-use bond_release as the environment for calling it
is correct (RTNL is held). I have been running tests for the past
week and they came out successful. The only way for bond_release to fail
is for the slave to be attached in a different bond or to not be a slave
but that cannot happen as RTNL is held and no slave manipulations can be
achieved.
V2: As suggested bond_release is renamed to __bond_release_one with a
new parameter "all" introduced so to avoid calling unnecessary code while
destroying a bond, and a wrapper for it called bond_release is created
because of ndo_del_link. bond_release_all() is removed.
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Jones [Mon, 18 Feb 2013 10:29:20 +0000 (10:29 +0000)]
xen: netback: remove redundant xenvif_put
netbk_fatal_tx_err() calls xenvif_carrier_off(), which does
a xenvif_put(). As callers of netbk_fatal_tx_err should only
have one reference to the vif at this time, then the xenvif_put
in netbk_fatal_tx_err is one too many.
Signed-off-by: Andrew Jones <drjones@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
bonding: Fix initialize after use for 3ad machine state spinlock
The 3ad machine state spinlock can be used before it is inititialized
while doing bond_enslave() (and the port is being initialized) since
port->slave is set before the lock is prepared, thus causing soft
lock-ups and a multitude of other nasty bugs.
[ Rename __initialize_port_locks() variable name to 'slave' -DaveM ]
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
bonding: Fix race condition between bond_enslave() and bond_3ad_update_lacp_rate()
port->slave can be NULL since it's being initialized in bond_enslave
thus dereferencing a NULL pointer in bond_3ad_update_lacp_rate()
Also fix a minor bug, which could cause a port not to have
AD_STATE_LACP_TIMEOUT since there's no sync between
bond_3ad_update_lacp_rate() and bond_3ad_bind_slave(), by changing
the read_lock to a write_lock_bh in bond_3ad_update_lacp_rate().
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Larry Finger [Sun, 17 Feb 2013 17:01:20 +0000 (17:01 +0000)]
b43: Increase number of RX DMA slots
Bastian Bittorf reported that some of the silent freezes on a Linksys WRT54G
were due to overflow of the RX DMA ring buffer, which was created with 64
slots. That finding reminded me that I was seeing similar crashed on a netbook,
which also has a relatively slow processor. After increasing the number of
slots to 128, runs on the netbook that previously failed now worked; however,
I found that 109 slots had been used in one test. For that reason, the number
of slots is being increased to 256.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Bastian Bittorf <bittorf@bluebottle.com> Cc: Stable <stable@vger.kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Shahed Shaikh [Mon, 18 Feb 2013 12:06:16 +0000 (12:06 +0000)]
qlcnic: fix estimation of receive MSS in case of LRO for 83xx adapter
Set gso_size to MSS obtained from adapter to avoid incorrect estimation
of receive MSS, which would lead to delayed ACKs in some traffic patterns
Example:
Send two or three packets and wait for ack and only then send
remaining packets.
Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Himanshu Madhani [Mon, 18 Feb 2013 12:06:15 +0000 (12:06 +0000)]
qlcnic: refactor Legacy interrupt handling for 83xx
o Cleanly seperate 83xx Legacy interrupt handling code from 82xx
o Update 83xx Legacy interrupt handling code to match with the spec
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
o Config interrupt is not needed for mailbox interrupts.
Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
projects / karo-tx-linux.git / log