Ville Syrjälä [Wed, 4 Sep 2013 15:25:30 +0000 (18:25 +0300)]
drm/i915: Fix cursor visibility check with negative coordinates
When the cursor x coordinate is exactly -cursor_width, the cursor is
invisible. And obviously the same holds for the y coordinate and
cursor_height.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Mon, 16 Sep 2013 21:43:45 +0000 (23:43 +0200)]
drm/i915: re-layout intel_panel.c to obey 80 char limit
Especially intel_gmch_panel_fitting was shifting way too much over the
right edge and also was way too long. So extract two helpers, one for
gen4+ and one for gen2/3. Now the entire thing is again almost
readable ...
Spurred by checkpatch freaking out about a Ville's pipeconfig rework
in intel_panel.c
Otherwise just two lines that needed appropriate breaking.
Not functional change in this patch.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Wed, 4 Sep 2013 15:25:28 +0000 (18:25 +0300)]
drm/i915: Add explicit pipe src size to pipe config
Rather that mess about with hdisplay/vdisplay from requested_mode, add
explicit pipe src size information to pipe config.
Now requested_mode is only really relevant for dvo/sdvo output timings.
For everything else either adjusted_mode or pipe src size should be
used.
In many places where we end up using pipe source size, we should
actually use the primary plane size, but we don't currently store
that information explicitly. As long as we treat primaries as full
screen only, we can get away with this. Eventually when we move
primaries over to drm_plane, we need to fix it all up.
v2: Add a comment to explain what pipe_src_{w,h} are
Add a note about primary planes to commit message
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Wed, 4 Sep 2013 15:25:22 +0000 (18:25 +0300)]
drm/i915: Use adjusted_mode appropriately when computing watermarks
Currently most of the watermark code looks at crtc->mode which is the
user requested mode. The only piece of information there that is
relevant is hdisplay, the rest must come from adjusted_mode. Convert
all of the code to use requested_mode and adjusted_mode from
pipe config appropriately.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Wed, 4 Sep 2013 15:25:21 +0000 (18:25 +0300)]
drm/i915: Use adjusted_mode in intel_update_fbc()
Check the mode flags from the adjusted_mode, not user requested mode.
The hdisplay/vdisplay check actually checkes the primary plane size,
so those still need to come from the user requested mode.
Extract both modes from pipe config instead of the drm_crtc.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Wed, 4 Sep 2013 15:25:20 +0000 (18:25 +0300)]
drm/i915: Use adjusted_mode in HDMI 12bpc clock check
The pixel clock should come from adjusted_mode not requested_mode.
In this case the two should be the same as we don't currently
overwrite the clock in the case of HDMI. But let's make the code
safe against such things happening in the future.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Wed, 4 Sep 2013 15:25:18 +0000 (18:25 +0300)]
drm/i915: Grab the pixel clock from adjusted_mode not requested_mode
i9xx_set_pipeconf() attempts to get the current pixel clock from
requested_mode. requested_mode.clock may be totally bogus, so the
clock should come from adjusted_mode.
v2: Dropped the intel_compute_config() hunk due to killing of the
INTEL_FDI_FREQ check
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Fri, 6 Sep 2013 20:29:08 +0000 (23:29 +0300)]
drm/i915: Add fuzzy clock check for port_clock
Check and dump for port_clock.
v2: Also dump port_clock
Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Fri, 6 Sep 2013 20:29:07 +0000 (23:29 +0300)]
drm/i915: Add PIPE_CONF_CHECK_CLOCK_FUZZY()
Add a new pipe config check macro PIPE_CONF_CHECK_CLOCK_FUZZY() to make
it trivial and error proof to compare clocks in a fuzzy manner.
v2: Drop extra curly braces
Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Fri, 13 Sep 2013 13:00:08 +0000 (16:00 +0300)]
drm/i915: Fix port_clock and adjusted_mode.clock readout all over
Now that adjusted_mode.clock no longer contains the pixel_multiplier, we
can kill the get_clock() callback and instead do the clock readout
in get_pipe_config().
Also i9xx_crtc_clock_get() can now extract the frequency of the PCH
DPLL, so use it to populate port_clock accurately for PCH encoders.
For DP in port A the encoder is still responsible for filling in
port_clock. The FDI adjusted_mode.clock extraction is kept in place
for some extra sanity checking, but we no longer need to pretend it's
also the port_clock.
In the encoder get_config() functions fill out adjusted_mode.clock
based on port_clock and other details such as the DP M/N values,
HDMI 12bpc and SDVO pixel_multiplier. For PCH encoders we will then
do an extra sanity check to make sure the dotclock we derived from
the FDI configuratiuon matches the one we derive from port_clock.
DVO doesn't exist on PCH platforms, so it doesn't need to anything
but assign adjusted_mode.clock=port_clock. And DDI is HSW only, so
none of the changes apply there.
v2: Use hdmi_reg color format to detect 12bpc HDMI case
v3: Set adjusted_mode.clock for LVDS too
v4: Rename ironlake_crtc_clock_get to ironlake_pch_clock_get,
eliminate the useless link_freq variable.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Mon, 9 Sep 2013 11:06:37 +0000 (14:06 +0300)]
drm/i915: Make i9xx_crtc_clock_get() work for PCH DPLLs
Add the 120MHz refernce clock case for PCH DPLLs.
Also determine the reference clock frequency more accurately by
checking for the PLLB_REF_INPUT_SPREADSPECTRUMIN refclk input
mode. The gen2 code already checked it, but it stil assumed a
fixed 66MHz refclk. Instead we need to consult the VBT for the
real value.
v2: Fix refclk for SSC panel case
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Fri, 13 Sep 2013 13:18:46 +0000 (16:18 +0300)]
drm/i915: Make i9xx_crtc_clock_get() use dpll_hw_state
We already extract the DPLL state to pipe_config, so let's make use of
it in i9xx_crtc_clock_get() and avoid the register reads.
This will also make the function closer to being useable with PCH DPLL
since the registers for those live in a different address.
Also kill the useless adjusted_mode.clock zeroing. It's already zero at
this point.
v2: Read out DPLL state in intel_crtc_mode_get()
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Fri, 13 Sep 2013 12:59:11 +0000 (15:59 +0300)]
drm/i915: Add intel_dotclock_calculate()
Extract the code to calculate the dotclock from the link clock and M/N
values into a new function from ironlake_crtc_clock_get().
The new function can be used to calculate the dotclock for both FDI and
DP cases.
Also simplify the code a bit along the way.
v2: Don't forget about non-pch encoders in ironlake_crtc_clock_get()
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jani Nikula [Fri, 13 Sep 2013 08:03:08 +0000 (11:03 +0300)]
drm/i915: add asserts for cursor disabled
The cursor is supposed to be disabled during crtc mode set (disabled by
ctrc disable). Assert this is the case.
v2: move cursor disabled assert next to plane asserts (Ville)
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ben Widawsky [Fri, 13 Sep 2013 05:28:29 +0000 (22:28 -0700)]
drm/i915: Fix l3 parity user buffer offset
The buf pointer used during l3_write is just char *, therefore it does
not require the silly any addition of offset.
v2: Also fix i915_l3_read with a suggested logic from Ville
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ben Widawsky [Fri, 13 Sep 2013 05:28:28 +0000 (22:28 -0700)]
drm/i915: Round l3 parity reads down
We always read a register for l3 parity reads, and we don't really want
to ever let userspace trick us into giving back less than the dword.
Writes are okay because we assume everything will be 0 filled, and as
such, if a user really wants to write less than a dword, let them.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ben Widawsky [Fri, 13 Sep 2013 05:28:27 +0000 (22:28 -0700)]
drm/i915: Remove extra "ring"
Sadly, this isn't the first time we've done this:
http://lists.freedesktop.org/archives/intel-gfx/2013-June/029065.html
Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Fri, 6 Sep 2013 20:29:02 +0000 (23:29 +0300)]
drm/i915: Make intel_fuzzy_clock_check() take in arbitrary clocks
We want to do fuzzy clock checks for other things besides
adjusted_mode.clock, so just pass two two clocks to compare
to intel_fuzzy_clock_check().
Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Tue, 10 Sep 2013 14:02:54 +0000 (17:02 +0300)]
drm/i915: Add state readout and checking for has_dp_encoder and dp_m_n
Add functions to read out the CPU and PCH transcoder M/N values,
and use them to fill out the pipe config dp_m_n information. And
while at it populate has_dp_encoder too.
Also refactor ironlake_get_fdi_m_n_config() to simply call the new
intel_cpu_transcoder_get_m_n() function.
v2: Remember the DDI
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Fri, 6 Sep 2013 20:29:00 +0000 (23:29 +0300)]
drm/i915: Add support for pipe_bpp readout
On CTG+ read out the pipe bpp setting from hardware and fill it into
pipe config. Also check it appropriately.
v2: Don't do the pipe_bpp extraction inside the PCH only code block on
ILK+.
Avoid the PIPECONF read as we already have read it for the
PIPECONF_EANBLE check.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Fri, 6 Sep 2013 20:28:59 +0000 (23:28 +0300)]
drm/i915: Make adjusted_mode.clock non-pixel multiplied
It would be easier if adjusted_mode.clock would be the pipe pixel clock,
and it actually is, except for the cases where pixel_multiplier > 1.
So let's change intel_sdvo to use port_clock as the multiplied clock,
and then we can leave adjusted_mode.clock as pipe pixel clock.
v2: Improve port_clock documentation
Rebased on top of SDVO pixel_multiplier fixes
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Fri, 6 Sep 2013 20:28:58 +0000 (23:28 +0300)]
drm/i915: Don't factor in pixel multplier when deriving dotclock from link clock and M/N values
We feed the non-multiplied clock to intel_link_compute_m_n(), so the
opposite operation should use the same order of operations. So we just
multiply by pixel_multiplier in the end now.
Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Paulo Zanoni [Thu, 12 Sep 2013 16:58:17 +0000 (13:58 -0300)]
drm/i915: don't save/restore LBB on Gen5+
Because this PCI config register doesn't exist on Gen5+.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Paulo Zanoni [Thu, 12 Sep 2013 21:06:43 +0000 (18:06 -0300)]
drm/i915: move more code to __i915_drm_thaw
Both callers had code to sanitize the uncore and restore the GTT
mappings just before calling __i915_drm_thaw, so Chris suggested I
should unify the code.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ben Widawsky [Wed, 11 Sep 2013 21:57:50 +0000 (14:57 -0700)]
drm/i915: evict VM instead of everything
When reserving objects during execbuf, it is possible to come across an
object which will not fit given the current fragmentation of the address
space. We do not have any defragment in drm_mm, so the strategy is to
instead evict everything, and reallocate objects.
With the upcoming addition of multiple VMs, there is no point to evict
everything since doing so is overkill for the specific case mentioned
above.
Recommended-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
[danvet: One additional s/evict_everything/evict_vm/ to update a
comment in the code.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ben Widawsky [Wed, 11 Sep 2013 21:57:48 +0000 (14:57 -0700)]
drm/i915: Synchronize pread/pwrite with wait_rendering
lifted from Daniel:
pread/pwrite isn't about the object's domain at all, but purely about
synchronizing for outstanding rendering. Replacing the call to
set_to_gtt_domain with a wait_rendering would imo improve code
readability. Furthermore we could pimp pread to only block for
outstanding writes and not for reads.
Since you're not the first one to trip over this: Can I volunteer you
for a follow-up patch to fix this?
v2: Switch the pwrite patch to use \!read_only. This was a typo in the
original code. (Chris, Daniel)
Recommended-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
[danvet: Fix up the logic fumble - wait_rendering has a bool readonly
paramater, set_to_gtt_domain otoh has bool write. Breakage reported by
Jani Nikula, I've double-checked that igt/gem_concurrent_blt/prw-*
would have caught this.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Tue, 10 Sep 2013 14:03:41 +0000 (17:03 +0300)]
drm/i915: Fix HSW sync flags to use pipe config adjusted_mode
intel_ddi_enable_transcoder_func() picked the sync flags from crtc->mode
instead of the pipe config adjusted_mode. Fix the problem and hopefully
rid my HSW machine of the remaining pipe config warnings.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Tue, 10 Sep 2013 10:27:37 +0000 (11:27 +0100)]
drm/i915: Remove the double-list iteration from bound_any()
The purpose of the function is to find out whether the object is still
bound in any address space. This can be easily checked by looking at the
vma currently associated with the object, rather than asking if any of
the global address spaces have an active vma on the object.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Sat, 10 Aug 2013 21:16:32 +0000 (22:16 +0100)]
drm/i915: Write RING_TAIL once per-request
Ignoring the legacy DRI1 code, and a couple of special cases (to be
discussed later), all access to the ring is mediated through requests.
The first write to a ring will grab a seqno and mark the ring as having
an outstanding_lazy_request. Either through explicitly adding a request
after an execbuffer or through an implicit wait (either by the CPU or by
a semaphore), that sequence of writes will be terminated with a request.
So we can ellide all the intervening writes to the tail register and
send the entire command stream to the GPU at once. This will reduce the
number of *serialising* writes to the tail register by a factor or 3-5
times (depending upon architecture and number of workarounds, context
switches, etc involved). This becomes even more noticeable when the
register write is overloaded with a number of debugging tools. The
astute reader will wonder if it is then possible to overflow the ring
with a single command. It is not. When we start a command sequence to
the ring, we check for available space and issue a wait in case we have
not. The ring wait will in this case be forced to flush the outstanding
register write and then poll the ACTHD for sufficient space to continue.
The exception to the rule where everything is inside a request are a few
initialisation cases where we may want to write GPU commands via the CS
before userspace wakes up and page flips.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Fri, 30 Aug 2013 11:30:25 +0000 (14:30 +0300)]
drm/i915: Refactor max WM level
Pull the expected max WM level determinations out to a separate
function. Will have another user soon.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Fri, 30 Aug 2013 11:30:24 +0000 (14:30 +0300)]
drm/i915: Use ilk_compute_wm_level to compute WM_PIPE values
Unify the code a bit to use ilk_compute_wm_level for all watermark
levels.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Fri, 30 Aug 2013 11:30:23 +0000 (14:30 +0300)]
drm/i915: Constify some watermark data
hsw_pipe_wm_parameters and hsw_wm_maximums typically are read only. Make
them const.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Tue, 10 Sep 2013 08:39:55 +0000 (11:39 +0300)]
drm/i915: Call intel_update_watermarks() in specific place during modeset
Make the call to intel_update_watermarks() just once or twice during
modeset. Ideally it should happen independently when each plane gets
enabled/disabled, but for now it seems better to keep it in central
place. We can improve things when we get all the planes sorted out
in a better way.
When enabling set up the watermarks just before the pipe is enabled.
And when disabling we need to wait until we've marked the crtc as
inactive, as otherwise intel_crtc_active() would still think the pipe
is enabled and the computed watermarks would reflect that.
v2: Pimp up the commit message a bit
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Tue, 10 Sep 2013 08:40:40 +0000 (11:40 +0300)]
drm/i915: Pass crtc to intel_update_watermarks()
Passing the appropriate crtc to intel_update_watermarks() should help
in avoiding needless work in the future.
v2: Avoid clash with internal 'crtc' variable in some wm functions
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Mika Kuoppala [Fri, 6 Sep 2013 13:03:28 +0000 (16:03 +0300)]
drm/i915: include hangcheck action and score in error_state
Score and action reveals what all the rings were doing
and why hang was declared. Add idle state so that
we can distinguish between waiting and idle ring.
v2: - add idle as a hangcheck action
- consensed hangcheck status to single line (Chris)
- mark active explicitly when we are making progress (Chris)
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Mika Kuoppala [Fri, 30 Aug 2013 13:19:28 +0000 (16:19 +0300)]
drm/i915: ban badly behaving contexts
Now when we have mechanism in place to track which context
was guilty of hanging the gpu, it is possible to punish
for bad behaviour.
If context has recently submitted a faulty batchbuffers guilty of
gpu hang and submits another batch which hangs gpu in quick
succession, ban it permanently. If ctx is banned, no more
batchbuffers will be queued for execution.
There is no need for global wedge machinery anymore and
it would be unwise to wedge the whole gpu if we have multiple
hanging batches queued for execution. Instead just ban
the guilty ones and carry on.
v2: Store guilty ban status bool in gpu_error instead of pointers
that might become danling before hang is declared.
v3: Use return value for banned status instead of stashing state
into gpu_error (Chris Wilson)
v4: - rebase on top of fixed hang stats api
- add define for ban period
- rename commit and improve commit msg
v5: - rely context banning instead of wedging the gpu
- beautification and fix for ban calculation (Chris)
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jani Nikula [Fri, 6 Sep 2013 04:40:05 +0000 (07:40 +0300)]
drm/i915: add support for per-pipe power sequencing on vlv
VLV has per-pipe PP registers. Set up power sequencing on mode set. The
connector init time setup is problematic, since we don't have a pipe at
that time. Cook up something.
v2:
- use vlv_power_sequencer_pipe() also in _pp_{ctrl,stat}_reg()
- use PANEL_PORT_SELECT_DPC_VLV (Ville)
v3: make checkpatch happier
Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[danvet: Make checkpatch a bit more happier still ...] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jani Nikula [Thu, 5 Sep 2013 13:44:46 +0000 (16:44 +0300)]
drm/i915: clean up power sequencing register port select definitions
Remove duplicates, add VLV specific macros for port B and C.
v2: also add PANEL_PORT_SELECT_DPC_VLV for clarity (Ville)
Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
drm/i915: move encoder->enable callback later in VLV crtc enable
v2: Rebase on the renamed enable hooks, adding clarity (Ville)
Reference: http://mid.gmane.org/CAKMK7uFs9EMvMW8BnS24e5UNm1D7JrfVg3SD5SDFtVEamGfOOg@mail.gmail.com Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jani Nikula [Fri, 6 Sep 2013 04:38:29 +0000 (07:38 +0300)]
drm/i915: name intel dp hooks per platform
In line with the rest of the code base. No functional changes.
v2: also s/intel_pre_enable_dp/g4x_pre_enable_dp/ for consistency (Ville)
Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chon Ming Lee [Thu, 5 Sep 2013 12:41:49 +0000 (20:41 +0800)]
drm/i915: Add additional pipe parameter for vlv_dpio_read and vlv_dpio_write. v2
The patch doesn't contain functional change, but is to prepare for
future platform which has different DPIO phy. The additional pipe
parameter will use to select which phy to target for.
v2: Update the commit message and add static for the new function.
(Jani/Ville)
Signed-off-by: Chon Ming Lee <chon.ming.lee@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Wed, 4 Sep 2013 09:45:52 +0000 (10:45 +0100)]
drm/i915; Preallocate the lazy request
It is possible for us to be forced to perform an allocation for the lazy
request whilst running the shrinker. This allocation may fail, leaving
us unable to reclaim any memory leading to premature OOM. A neat
solution to the problem is to preallocate the request at the same time
as acquiring the seqno for the ring transaction. This means that we can
report ENOMEM prior to touching the rings.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Wed, 4 Sep 2013 09:45:51 +0000 (10:45 +0100)]
drm/i915: Rename ring->outstanding_lazy_request
Prior to preallocating an request for lazy emission, rename the existing
field to make way (and differentiate the seqno from the request struct).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Tue, 3 Sep 2013 10:31:38 +0000 (13:31 +0300)]
drm/i915: Kill IRONLAKE_FDI_FREQ check
ironlake_fdi_compute_config() already checks that we have enough
FDI bandwidth. And it doesn't just use a hardcoded value but takes
into account factors such as the actual FDI frequency, shared FDI
B/C lanes, etc.
Suggested-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chon Ming Lee [Tue, 3 Sep 2013 17:30:38 +0000 (01:30 +0800)]
drm/i915: Move Valleyview DP DPLL divisor calc to intel_dp_set_clock v2
For DP pll settings, there is only two golden configs. Instead of
running through the algorithm to determine it, hardcode the value and get it
determine in intel_dp_set_clock.
v2: Rework on the intel_limit compiler warning. (Jani)
Signed-off-by: Chon Ming Lee <chon.ming.lee@intel.com>
[danvet: Fix up checkpatch issues.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jani Nikula [Fri, 30 Aug 2013 16:40:32 +0000 (19:40 +0300)]
drm/i915: do display power state notification on crtc enable/disable
The spec says to notify prior to power down and after power up. It is
unclear whether it makes a difference.
Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jani Nikula [Fri, 30 Aug 2013 16:40:31 +0000 (19:40 +0300)]
drm/i915: add opregion function to notify bios of adapter power state
Notifying the bios lets it enter power saving states.
Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jani Nikula [Fri, 30 Aug 2013 16:40:30 +0000 (19:40 +0300)]
drm/i915: add opregion function to notify bios of encoder enable/disable
The bios interface seems messy, and it's hard to tell what the bios
really wants. At first, only add support for DDI based machines (hsw+),
and see how it turns out.
The spec says to notify prior to power down and after power up. It is
unclear whether it makes a difference.
v2:
- squash notification function and callers patches together (Daniel)
- move callers to haswell_crtc_{enable,disable} (Daniel)
- rename notification function (Chris)
v3:
- separate notification function and callers again, as it's not clear
whether the display power state notification is the right thing to do
after all
v4: per Paulo's review:
- drop LVDS
- WARN on unsupported encoder types
Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jani Nikula [Fri, 30 Aug 2013 16:40:28 +0000 (19:40 +0300)]
drm/i915: expose intel_ddi_get_encoder_port()
In preparation for followup work.
Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jani Nikula [Mon, 2 Sep 2013 07:38:59 +0000 (10:38 +0300)]
drm/i915: add plumbing for SWSCI
SWSCI is a driver to bios call interface.
This checks for SWSCI availability and bios requested callbacks, and
filters out any calls that shouldn't happen. This way the callers don't
need to do the checks all over the place.
v2: silence some checkpatch nagging
v3: set PCI_SWSCI bit 0 to trigger interrupt (Mengdong Lin)
v4: remove an extra #define (Jesse)
v5: spec says s/w is responsible for clearing PCI_SWSCI bit 0 too
v6: per Paulo's review and more:
- fix sub-function mask
- add exit parameter
- add define for set panel details call
- return more errors from swsci
- clean up the supported/requested callbacks bit masks mess
- use DSLP for timeout
- fix build for CONFIG_ACPI=n
v7: tiny adjustment of requested vs. supported SBCB callbacks handling (Paulo)
Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Mon, 26 Aug 2013 22:50:54 +0000 (19:50 -0300)]
drm/i915: Rearrange the comments in i915_add_request()
The comments were a little out-of-sequence with the code, forcing the
reader to jump around whilst reading. Whilst moving the comments around,
add one to explain the context reference.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Mon, 26 Aug 2013 22:50:53 +0000 (19:50 -0300)]
drm/i915: Do not add an interrupt for a context switch
We use the request to ensure we hold a reference to the context for the
duration that it remains in use by the ring. Each request only holds a
reference to the current context, hence we emit a request after
switching contexts with the final reference to the old context. However,
the extra interrupt caused by that request is not useful (no timing
critical function will wait for the context object), instead the overhead
of servicing the IRQ shows up in some (lightweight) benchmarks. In order
to keep the useful property of using the request to manage the context
lifetime, we want to add a dummy request that is associated with the
interrupt from the subsequent real request following the batch.
The extra interrupt was added as a side-effect of using
i915_add_request() in
v2: Daniel convinced me that the request here was solely for context
lifetime tracking and that we have the active ref to keep the object
alive whilst the MI_SET_CONTEXT. So the only concern then is which
context should get the blame for MI_SET_CONTEXT failing. The old scheme
added a request for the old context so that any hang upto and including
the switch away would mark the old context as guilty. Now any hang here
implicates the new context. However since we have already gone through a
complete flush with the last context in its last request, and all that
lies in no-man's-land is an invalidate flush and the MI_SET_CONTEXT, we
should be safe in not unduly placing blame on the new context.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ben Widawsky <ben@bwidawsk.net> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Thu, 29 Aug 2013 17:50:31 +0000 (19:50 +0200)]
drm/i915: Fix list corruption in vma_unbind
The saga around the breadcrumb vmas used by execbuf continues ...
This time around we've managed to unconditionally move the object to
the unbound list on the last vma unbind even though it might never
have been on either the bound or unbound list. Hilarity ensued.
Chris Wilson tracked this one down but compared to his patches I've
simply opted to completely separate the unbound case for not-yet bound
vmas. Otherwise we imo end up with semantically hard to parse checks
around the list_move_tail(global_list, ...).
Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ben Widawsky <ben@bwidawsk.net>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=68462 Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ben Widawsky [Fri, 23 Aug 2013 23:00:07 +0000 (16:00 -0700)]
drm/i915: Restore the preliminary HW check.
We still maintain code internally that cares about preliminary support.
Leaving the check here doesn't hurt anyone, and should keep things more
in line.
This time around, stick the info in the intel_info structure, and also
change the error from DRM_ERROR->DRM_INFO.
This is a partial revert of:
commit 590e4df8c82e6c2707ae12ba6672ab6fb9cd4b89
Author: Jesse Barnes <jbarnes@virtuousgeek.org>
Date: Wed May 8 10:45:15 2013 -0700
drm/i915: VLV support is no longer preliminary
Daniel, I'll provide the fix ups for internal too if/when you merge
this (if you want).
Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Rodrigo Vivi [Wed, 28 Aug 2013 19:45:46 +0000 (16:45 -0300)]
drm/i915: Report enabled slices on Haswell GT3
Batchbuffers constructed by userspace can conditionalise their URB
allocations through the use of the MI_SET_PREDICATE command. This
command can read the MI_PREDICATE_RESULT_2 register to see how many
slices are enabled on GT3, and by virtue of the result, scale their
memory allocations to fit enabled memory.
Of course, this only works if the kernel sets the appropriate bit in the
register first.
v2: Better commit subject and message by Chris Wilson.
Cc: Chris Wilson <chris@chris-wilson.co.uk> Credits-to: Yejun Guo <yejun.guo@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Wed, 28 Aug 2013 08:38:49 +0000 (10:38 +0200)]
drm/i915/dsi: s/size_t/int/
This fixes a printf warn from gcc:
drivers/gpu/drm/i915/intel_dsi_cmd.c: In function ‘dsi_vc_send_long’:
drivers/gpu/drm/i915/intel_dsi_cmd.c:181:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 7 has type ‘size_t’ [-Wformat=]
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jani Nikula [Tue, 27 Aug 2013 12:12:26 +0000 (15:12 +0300)]
drm/i915: initialize DSI output on VLV
Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jani Nikula [Tue, 27 Aug 2013 12:12:22 +0000 (15:12 +0300)]
drm/i915: fix PLL assertions for DSI PLL
For DSI, we need to be asserting DSI PLL, not DPLL.
This is a somewhat stopgap implementation. It's slightly ugly to have to
pass the dsi parameter to intel_enable_pipe().
Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
ymohanma [Tue, 27 Aug 2013 20:40:56 +0000 (23:40 +0300)]
drm/i915: add VLV DSI PLL Calculations
v2:
- Grab dpio_lock mutex in vlv_enable_dsi_pll().
- Add and call vlv_disable_dsi_pll().
v3: Mostly based on Ville's review comments.
- Only pipe A has DSI PLL lock bit.
- Add more of CCK REG bit definitions for DSI PLL.
- Make tables static.
- Move clock gating out of the clock calculation functions.
- DSI PLL LDO power gating.
- Put alternative MNP from table calc behind #ifdef.
v4: s/CKK/CLK/ in the CCK REG bit definitions (Ville).
Signed-off-by: ymohanma <yogesh.mohan.marimuthu@intel.com> Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jani Nikula [Tue, 27 Aug 2013 12:12:20 +0000 (15:12 +0300)]
drm/i915: add basic MIPI DSI output support
This does not include any panel specific sub-encoders yet.
v2: Fix fixed mode handling (Daniel)
v3: Mostly based on Ville's review comments.
- Fix MIPI_HS_TX_TIMEOUT.
- DPI_ENABLE only for video mode.
- Drop ULPS usage for now, use DEVICE_READY only.
- Set MIPI_INIT_COUNT based on txclkesc.
Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jani Nikula [Tue, 27 Aug 2013 12:12:19 +0000 (15:12 +0300)]
drm/i915: add MIPI DSI command sending routines
v2: Rebase due to register bit definition change.
v3: Mostly based on Ville's review comments.
- Use size_t for length all around.
- Reuse dsi_vc_send_short in dsi_vc_send_long.
- Remove stale/incorrect comments.
- Reverse special packet sent interrupt check.
- Use DSI controller regs for reading, not adapter.
Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jani Nikula [Tue, 27 Aug 2013 12:12:18 +0000 (15:12 +0300)]
drm/i915: add structs for MIPI DSI output
The sub-encoder model is copied from DVO.
v2: Add attached_connector to struct intel_dsi.
Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jani Nikula [Tue, 27 Aug 2013 12:12:16 +0000 (15:12 +0300)]
drm/i915: add MIPI DSI register definitions
Add definitions for VLV MIPI DSI registers.
v2: Small fixes per Ville's review comments.
Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jani Nikula [Tue, 27 Aug 2013 12:12:15 +0000 (15:12 +0300)]
drm/i915: add VLV pipeconf bit definition for DSI PLL lock
v2: Add comment this is pipe A only (Ville)
Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Shobhit Kumar [Tue, 27 Aug 2013 12:12:13 +0000 (15:12 +0300)]
drm: add MIPI DSI encoder and connector types
Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Dave Airlie <airlied@gmail.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Mon, 26 Aug 2013 22:51:00 +0000 (19:51 -0300)]
drm/i915: Always prefer CPU relocations with LLC
A follow-on to the update of the LLC coherency logic is that we can rely
on the LLC being coherent with the CS for rewriting batchbuffers
irrespective of their cache domain. (This should have no effect
currently as all the batch buffers are expected to be I915_CACHE_LLC and
so using the cpu relocation path anyway.)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Mon, 26 Aug 2013 09:23:47 +0000 (11:23 +0200)]
drm/i915: More vma fixups around unbind/destroy
The important bugfix here is that we must not unlink the vma when
we keep it around as a placeholder for the execbuf code. Since then we
won't find it again when execbuf gets interrupt and restarted and
create a 2nd vma. And since the code as-is isn't fit yet to deal with
more than one vma, hilarity ensues.
Specifically the dma map/unmap of the sg table isn't adjusted for
multiple vmas yet and will blow up like this:
As a consequence we need to change the "only one vma for now" check in
vma_unbind - since vma_destroy isn't always called the obj->vma_list
might not be empty. Instead check that the vma list is singular at the
beginning of vma_unbind. This is also more symmetric with bind_to_vm.
This fixes the igt/gem_evict_everything|alignment testcases.
v2:
- Add a paranoid WARN to mark_free in the eviction code to make sure
we never try to evict a vma used by the execbuf code right now.
- Move the check for a temporary execbuf vma into vma_destroy -
otherwise the failure path cleanup in bind_to_vm will blow up.
drm/i915: Don't destroy the vma placeholder during execbuffer reservation
Squash with this when merging!
v3: Improvements suggested in Chris' review:
- Move the WARN_ON in vma_destroy that checks for vmas with an drm_mm
allocation before the early return.
- Bail out if we hit the WARN in mark_free to hopefully make the
kernel survive for long enough to capture it.
Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ben Widawsky <ben@bwidawsk.net>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=68298
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=68171 Tested-by: lu hua <huax.lu@intel.com> (v2) Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Tue, 20 Aug 2013 11:56:40 +0000 (12:56 +0100)]
drm/i915: Don't destroy the vma placeholder during execbuffer reservation
The execbuffer handle and exec_link were moved from the object into the
vma. As the vma may be unbound and destroyed whilst attempting to
reserve the execbuffer objects (either through a forced unbind to fix up
a misalignment or through an evict-everything call) we need to prevent
the free of the i915_vma itself. Otherwise not only is the list of
objects to reserve corrupt, but we continue to reference stale vma
entries.
Fixes kernel crash with i-g-t/gem_evict_everything
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
References: http://www.spinics.net/lists/intel-gfx/msg32038.html
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=68298 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Wed, 14 Aug 2013 12:14:04 +0000 (14:14 +0200)]
drm/i915: inline vma_create into lookup_or_create_vma
In the execbuf code we don't clean up any vmas which ended up not
getting bound for code simplicity. To make sure that we don't end up
creating multiple vma for the same vm kill the somewhat dangerous
vma_create function and inline it into lookup_or_create.
This is just a safety measure to prevent surprises in the future.
Also update the somewhat confused comment in the execbuf code and
clarify what kind of magic is going on with a new one.
v2: Keep the function separate as requested by Chris. But give it a __
prefix for paranoia and move it tighter together with the other vma
stuff.
Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ben Widawsky <ben@bwidawsk.net> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ben Widawsky [Wed, 14 Aug 2013 09:38:36 +0000 (11:38 +0200)]
drm/i915: Convert execbuf code to use vmas
In order to transition more of our code over to using a VMA instead of
an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up
until now, we've only had a VMA when actually binding an object.
The previous patch helped handle the distinction on bound vs. unbound.
This patch will help us catch leaks, and other issues before we actually
shuffle a bunch of stuff around.
This attempts to convert all the execbuf code to speak in vmas. Since
the execbuf code is very self contained it was a nice isolated
conversion.
The meat of the code is about turning eb_objects into eb_vma, and then
wiring up the rest of the code to use vmas instead of obj, vm pairs.
Unfortunately, to do this, we must move the exec_list link from the obj
structure. This list is reused in the eviction code, so we must also
modify the eviction code to make this work.
WARNING: This patch makes an already hotly profiled path slower. The cost is
unavoidable. In reply to this mail, I will attach the extra data.
v2: Release table lock early, and two a 2 phase vma lookup to avoid
having to use a GFP_ATOMIC. (Chris)
v3: s/obj_exec_list/obj_exec_link/
Updates to address
commit 6d2b888569d366beb4be72cacfde41adee2c25e1
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Wed Aug 7 18:30:54 2013 +0100
drm/i915: List objects allocated from stolen memory in debugfs
v4: Use obj = vma->obj for neatness in some places (Chris)
need_reloc_mappable() should return false if ppgtt (Chris)
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
[danvet: Split out prep patches. Also remove a FIXME comment which is
now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Tue, 3 Sep 2013 18:40:37 +0000 (20:40 +0200)]
drm/i915: fix i9xx_crtc_clock_get for multiplied pixels
The dpll actually runs at the port clock so we don't need
to multiply it again with the pixel multiplier to get the
adjusted_mode.clock. This is in contrast to the ironlake
pixel clock readout code which uses the fdi dotclock: That
one does _not_ run with multiplied pixels.
This issue goes back to the original clock readout code added
in
Daniel Vetter [Tue, 3 Sep 2013 18:40:36 +0000 (20:40 +0200)]
drm/i915: handle sdvo input pixel multiplier correctly again
The sdvo input timing needs to be the actual mode, the sdvo
encoder automatically adjusts for the need of pixel doubling or
quadrupling. This was lost in pipe config conversion of the
pixel multiplier in
Daniel Vetter [Mon, 2 Sep 2013 14:22:25 +0000 (16:22 +0200)]
drm/i915: fix hpd work vs. flush_work in the pageflip code deadlock
Historically we've run our own driver hotplug handling in our own
work-queue, which then launched the drm core hotplug handling in the
system workqueue. This is important since we flush our own driver
workqueue in the pageflip code while hodling modeset locks, and only
the drm hotplug code grabbed these locks. But with
this was changed and now we could deadlock in our flip handler if
there's a hotplug work blocking the progress of the crucial unpin
works. So this broke the careful deadlock avoidance implemented in
drm/i915: Flush outstanding unpin tasks before pageflipping
Since the rule thus far has been that work items on our own workqueue
may never grab modeset locks simply restore that rule again.
v2: Add a comment to the declaration of dev_priv->wq to warn readers
about the tricky implications of using it. Suggested by Chris Wilson.
Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Stuart Abercrombie <sabercrombie@chromium.org> Reported-by: Stuart Abercrombie <sabercrombie@chromium.org>
References: http://permalink.gmane.org/gmane.comp.freedesktop.xorg.drivers.intel/26239 Cc: stable@vger.kernel.org Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Squash in a comment at the place where we schedule the work.
Requested after-the-fact by Chris on irc since the hpd work isn't the
only place we botch this.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Mon, 2 Sep 2013 18:13:39 +0000 (21:13 +0300)]
drm/i915: Fix pipe config warnings when dealing with LVDS fixed mode
intel_fixed_panel_mode() overwrote the adjusted_mode with the fixed mode
only partially. Notably it forgot to copy over the sync flags. The LVDS code however programmed the hardware with the sync flags from fixed mode, and then later the pipe config comparison obviously failed as we
filled out the adjusted_mode in get_config from the real registers.
Just call drm_mode_copy() in intel_fixed_panel_mode() to copy over the
whole thing, and then just use adjusted_mode in the LVDS code to figure
out which sync settings the hardware needs.
Also constify the fixed_mode argument to intel_fixed_panel_mode().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Damien Lespiau [Fri, 30 Aug 2013 14:39:26 +0000 (15:39 +0100)]
drm/i915: Don't call sg_free_table() if sg_alloc_table() fails
One needs to call __sg_free_table() if __sg_alloc_table() fails, but
sg_alloc_table() does that for us already.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewd-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Alex Williamson [Wed, 28 Aug 2013 15:39:08 +0000 (09:39 -0600)]
i915: Update VGA arbiter support for newer devices
This is intended to add VGA arbiter support for Intel HD graphics on
Core processors. The old GMCH registers no longer exist, so even
though it appears that i915 participates in VGA arbitration, it doesn't
work. On Intel HD graphics we already attempt to disable VGA regions
of the device. This makes registering as a VGA client unnecessary since
we don't intend to operate differently depending on how many VGA devices
are present. We can disable VGA memory regions by clearing the memory
enable bit in the VGA MSR. That only leaves VGA IO, which we update
the VGA arbiter to know that we don't participate in VGA memory
arbitration. We also add a hook on unload to re-enable memory and
reinstate VGA memory arbitration.
v3: Use explicit LEGACY_IO | LEGACY_MEM when restoring rather than
LEGACY_MASK, per Ville's comments.
v2: I915_READ/WRITE accessors don't work in i915_disable_vga, use inb/outb
directly. Also, on the driver unbind VGA enable path, acquire legacy
IO to re-enable VGA memory. Correct comment.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[danvet: Add patch changelog. Also squash in a fixup to have a dummy
static inline for vga_set_legacy_decoding for CONFIG_VGA_ARB=n as
reported by the 0-day kernel build bot.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
fixup 2
Alex Williamson [Thu, 15 Aug 2013 22:37:59 +0000 (16:37 -0600)]
vgaarb: Fix VGA decodes changes
When VGA decodes change we need to do a bit more evaluation of exactly what
has changed. We don't necessarily give up all the old owns resources and
we need to account for resources with locks. The new algorithm is: If
something is added, update decodes. If legacy resources were added and
none were there before, we have a new participant. If something is
removed, update decodes. If we previously owned it, we no longer own it.
If it was previously locked, invalidate all locks and release it. If
legacy resources were removed and none are left, remove the participant
from VGA arbitration.
Previously we updated decodes, released ownership of everything that was
previously decoded, ignored all locks, and went off looking for another
device to transfer VGA to. In a test case where Intel IGD removes only
legacy VGA memory decoding, this left the arbiter switching to discrete
graphics without actually disabling legacy VGA IO from the IGD. As a
bonus, we bumped up the count of VGA arbitration participants for no
good reason.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: Dave Airlie <airlied@redhat.com> Acked-by: Dave Airlie <airlied@redhat.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[danvet: Kill now unused variables, reported by the 0-day kernel
builtbot.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Alex Williamson [Thu, 15 Aug 2013 22:37:53 +0000 (16:37 -0600)]
vgaarb: Don't disable resources that are not owned
If a device does not own a resource then we don't need to disable it.
This resolves the case where an Intel IGD device can be configured to
disable decode of VGA memory but we still need the arbiter to handle
VGA I/O port routing. When the IGD device is in conflict, only
PCI_COMMAND_IO should be disabled since VGA memory does not require
arbitration on this device.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: Dave Airlie <airlied@redhat.com> Acked-by: Dave Airlie <airlied@redhat.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Mon, 26 Aug 2013 22:50:55 +0000 (19:50 -0300)]
drm/i915: Pin pages whilst mapping the dma-buf
As we attempt to kmalloc after calling get_pages, there is a possibility
that the shrinker may reap the pages we just acquired. To prevent this
we need to increment the pages_pin_count early, so rearrange the code
and error paths to make it so.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Paulo Zanoni [Fri, 23 Aug 2013 22:51:28 +0000 (19:51 -0300)]
drm/i915: enable trickle feed on Haswell
We shouldn't disable the trickle feed bits on Haswell. Our
documentation explicitly says the trickle feed bits of PRI_CTL and
CUR_CTL should not be programmed to 1, and the hardware engineer also
asked us to not program the SPR_CTL field to 1. Leaving the bits as 1
could cause underflows.
Reported-by: Arthur Runyan <arthur.j.runyan@intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
x86: add early quirk for reserving Intel graphics stolen memory v5
Systems with Intel graphics controllers set aside memory exclusively for
gfx driver use. This memory is not always marked in the E820 as
reserved or as RAM, and so is subject to overlap from E820 manipulation
later in the boot process. On some systems, MMIO space is allocated on
top, despite the efforts of the "RAM buffer" approach, which simply
rounds memory boundaries up to 64M to try to catch space that may decode
as RAM and so is not suitable for MMIO.
v2: use read_pci_config for 32 bit reads instead of adding a new one
(Chris)
add gen6 stolen size function (Chris)
v3: use a function pointer (Chris)
drop gen2 bits (Daniel)
v4: call e820_sanitize_map after adding the region
v5: fixup comments (Peter)
simplify loop (Chris)
Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Acked-by: H. Peter Anvin <hpa@zytor.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=66726
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=66844 Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
projects / linux-beck.git / log