Arnd Bergmann [Tue, 19 Feb 2013 21:40:03 +0000 (22:40 +0100)]
Merge branch 'next/dt' into for-next
* next/dt:
clk: tegra: initialise parent of uart clocks
ARM: tegra: remove clock-frequency properties from serial nodes
clk: tegra: fix driver to match DT binding
clk: tegra: local arrays should be static
clk: tegra: Add missing spinlock for hclk and pclk
clk: tegra: Implement locking for super clock
clk: tegra: fix wrong clock index between se to sata_cold
Arnd Bergmann [Tue, 19 Feb 2013 21:38:51 +0000 (22:38 +0100)]
Merge tag 'tegra-for-3.9-soc-ccf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/dt
ARM: tegra: common clock framework fixes
A number of small fixes are included to the new Tegra common clock
driver. These are: Missing locking, definition of device tree clock IDs
not matching the binding, a static cleanup, missing initialization of
some UART clocks.
This branch is based on Tegra's previous pull request tegra-for-3.9-dt.
This dependency is caused by the one patch that edits the device tree.
If this causes a problem, I can drop the final two patches in this pull
request for now, and rebase it onto previous tegra-for-3.9-soc-ccf
instead.
* tag 'tegra-for-3.9-soc-ccf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra:
clk: tegra: initialise parent of uart clocks
ARM: tegra: remove clock-frequency properties from serial nodes
clk: tegra: fix driver to match DT binding
clk: tegra: local arrays should be static
clk: tegra: Add missing spinlock for hclk and pclk
clk: tegra: Implement locking for super clock
clk: tegra: fix wrong clock index between se to sata_cold
(applied to next/dt branch rather than next/soc because of the
dependency)
Arnd Bergmann [Tue, 19 Feb 2013 19:54:15 +0000 (20:54 +0100)]
Merge tag 'omap-for-v3.9/usb-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc
These changes contain the OMAP USB related platform data changes
that were dropped from linux next because of the merge conflicts
as requested by me and Olof. The reason was that at this point
we really should be able to do the arch/arm related changes
separately from driver changes to avoid dependencies between
branches.
These patches were initially part of the USB related MFD patches.
Based on our comments, Roger Quadros quickly reworked these
patches into a shared branch between ARM SoC tree and the MFD
tree, then separate patches for the OMAP platform data and
MFD driver.
Note that this branch will conflict with c1d1cd597fc7
("ARM: OMAP2+: omap_device: remove obsolete pm_lats and
early_device code"). Please see http://lkml.org/lkml/2013/2/11/16
for the merge resolution.
Arnd Bergmann [Tue, 19 Feb 2013 19:35:27 +0000 (20:35 +0100)]
Merge branch 'late/mvebu-dt' into for-next
* late/mvebu-dt: (36 commits)
arm: mvebu: enable the SD card slot on Armada 370 Reference Design board
ARM: kirkwood: topkick: init mvsdio via DT
ARM: kirkwood: nsa310: convert to pinctrl
ARM: Kirkwood: topkick: Enable i2c bus.
ARM: kirkwood: topkick: convert to pinctrl
ARM: dove: convert serial DT nodes to clocks property
arm: mvebu: Add SPI flash on Armada 370 DB board
arm: mvebu: Add SPI flash on Armada XP-DB board
arm: mvebu: Add SPI flash on Armada XP-GP board
arm: mvebu: Add support for SPI controller in Armada 370/XP
clocksource: update and move armada-370-xp-timer documentation to timer directory
arm: mvebu: update DT to support local timers
ARM: Dove: convert usb host controller to DT
arm: mvebu: Enable USB controllers on Armada 370/XP boards
arm: mvebu: Add support for USB host controllers in Armada 370/XP
arm: mvebu: add button for OpenBlocks AX3-4
ARM: Kirkwood: Convert NS2 to gpio-poweroff.
ARM: Kirkwood: Convert NSA310 I2C to device tree
ARM: Kirkwood: Convert NSA310 to use gpio-poweroff driver
ARM: Kirkwood: Convert NSA310 to DT based regulators.
...
Arnd Bergmann [Tue, 19 Feb 2013 19:34:19 +0000 (20:34 +0100)]
Merge branch 'late/mvebu' into for-next
* late/mvebu:
arm: mvebu: update defconfig with ATAG support when using DT
ARM: mvebu: Update defconfig to select SPI flash and MTD support
ARM: mvebu: Update defconfig to select SPI support
arm: mvebu: support for the new Armada XP development board(DB-MV784MP-GP)
arm: mvebu: update defconfig with local timer support
clocksource: time-armada-370-xp: add local timer support
arm: mvebu: Add support for local interrupt
arm: mvebu: Update defconfig to select USB support
ARM: kirkwood: convert Guruplug Server Plus to use the device tree
arm: mvebu: add DTS file for Marvell RD-A370-A1 board
arm: mvebu: Improve the SMP support of the interrupt controller
ARM: Dove: split legacy and DT setup
ARM: dove: update dove_defconfig with a few useful options
ARM: Kirkwood: Remove redundent SDIO clock alias
ARM: Kirkwood: Remove redundent USB clock alias
arm: mvebu: add LEDs support to defconfig file
arm: mvebu: enable btmrvl driver in mvebu_defconfig
arm: mvebu: enable mwifiex driver in mvebu_defconfig
arm: mvebu: enable SDIO support in mvebu_defconfig
arm: mvebu: Update defconfig with Marvell RTC support
- dove
- USB support
- use clocks instead of clock-frequency for serial
I included patches depending on the mvsdio changes Chris Ball took, since
tags/boards_for_v3.9 has been pulled with that dependency.
All other patches with external dependencies are going into a separate branch,
mvebu/dt_deps. If necessary, they can wait for v3.10.
new depends:
- mvebu/boards
new conflicts:
- arch/arm/mach-kirkwood/board-nsa310.c
- remove the gpio.h include line.
** below is from previous tag dt_for_v3.9 **
depends on:
- tags/boards_for_v3.9, which pulls in:
- tags/mvebu_fixes_for_v3.8-rc6
- tags/cleanup_for_v3.9_round2
- tags/drivers_for_v3.9
- mmc/mmc-next up to: d293875 mmc: mvsdio: add pinctrl integration
* tag 'dt_for_v3.9_round2' of git://git.infradead.org/users/jcooper/linux: (22 commits)
arm: mvebu: enable the SD card slot on Armada 370 Reference Design board
ARM: kirkwood: topkick: init mvsdio via DT
ARM: kirkwood: nsa310: convert to pinctrl
ARM: Kirkwood: topkick: Enable i2c bus.
ARM: kirkwood: topkick: convert to pinctrl
ARM: dove: convert serial DT nodes to clocks property
arm: mvebu: Add SPI flash on Armada 370 DB board
arm: mvebu: Add SPI flash on Armada XP-DB board
arm: mvebu: Add SPI flash on Armada XP-GP board
arm: mvebu: Add support for SPI controller in Armada 370/XP
ARM: mvebu: Update defconfig to select SPI flash and MTD support
ARM: mvebu: Update defconfig to select SPI support
arm: mvebu: support for the new Armada XP development board(DB-MV784MP-GP)
clocksource: update and move armada-370-xp-timer documentation to timer directory
arm: mvebu: update DT to support local timers
arm: mvebu: update defconfig with local timer support
clocksource: time-armada-370-xp: add local timer support
arm: mvebu: Add support for local interrupt
ARM: Dove: convert usb host controller to DT
arm: mvebu: Enable USB controllers on Armada 370/XP boards
...
on Jan 30th. No response, so I decided to take the whole series through
mvebu->arm-soc.
- It turns out that this series depends on:
16b30cf arm: mvebu: Improve the SMP support of the interrupt controller
which had already been accepted and pushed into mvebu/boards.
- So, with the above, I decided the easiest way to merge this series in
while avoiding circular dependencies (eg by putting in it's proper place,
mvebu/drivers) was to merge them in to mvebu/boards. The only
alternative to this I can think of is to hold off till v3.10, but this
seemed a little drastic for such a small series.
** From previous tag boards_for_v3.9, no new depends **
depends on:
- tags/mvebu_fixes_for_v3.8-rc6
- tags/cleanup_for_v3.9_round2
- tags/drivers_for_v3.9
- mmc/mmc-next up to: d293875 mmc: mvsdio: add pinctrl integration
conflicts:
- arm-soc/for-next
- arch/arm/mach-dove/common.c
* remove all DT code (it's now in .../board-dt.c)
* tag 'boards_for_v3.9_round2' of git://git.infradead.org/users/jcooper/linux:
arm: mvebu: update defconfig with ATAG support when using DT
ARM: mvebu: Update defconfig to select SPI flash and MTD support
ARM: mvebu: Update defconfig to select SPI support
arm: mvebu: support for the new Armada XP development board(DB-MV784MP-GP)
arm: mvebu: update defconfig with local timer support
clocksource: time-armada-370-xp: add local timer support
arm: mvebu: Add support for local interrupt
arm: mvebu: Update defconfig to select USB support
Arnd Bergmann [Tue, 19 Feb 2013 16:09:13 +0000 (17:09 +0100)]
Merge branch 'late/dt' into for-next
* late/dt: (21 commits)
ARM: dts: add dtsi for imx6q and imx6dl
ARM: dts: rename imx6q.dtsi to imx6qdl.dtsi
ARM: dts: i.MX6: Add regulator delay support
ARM: dts: Add device tree entry for onewire master on i.MX53
ARM: i.MX53: Add clocks for i.mx53 onewire master.
W1: Add device tree support to MXC onewire master.
ARM: imx: enable imx6q-cpufreq support
ARM: dts: Add apf51 basic support
ARM i.MX6: change mxs usbphy clock usage
ARM: dts: imx6q: Remove silicon version from SDMA firmware
ARM i.MX53: dts: add oftree for MBa53 baseboard
ARM i.MX53: add dts for the TQ tqma53 module
ARM: dts: imx53: pinctrl update
ARM i.MX51 babbage: Add keypad support
ARM: dts: imx: Add imx51 KPP entry
ARM: dts: imx25-karo-tx25: Put status entry in the end
ARM: mx25pdk: Add device tree support
ARM: dts: imx: use nodes label in board dts
ARM: dts: add missing imx dtb targets
ARM: boot: dts: Add an entry for imx27-pdk.dtb
...
Arnd Bergmann [Tue, 19 Feb 2013 16:02:59 +0000 (17:02 +0100)]
Merge branch 'next/dt' into for-next
* next/dt: (63 commits)
sunxi: a13-olinuxino: Add user LED to the device tree
ARM: davinci: da850 DT: add support for machine reboot
ARM: davinci: da850: add wdt DT node
ARM: davinci: da850: add DT node for I2C0
ARM: at91: at91sam9n12: add DT parameters to enable PMECC
ARM: at91: at91sam9x5: add DT parameters to enable PMECC
ARM: at91: add EMAC bindings to RM9200 DT
ARM: at91: add SSC bindings to RM9200 DT
ARM: at91: add MMC bindings to RM9200 DT
ARM: at91: Animeo IP: enable watchdog support
ARM: nomadik: fix OF compilation regression
sunxi: a10-cubieboard: Add user LEDs to the device tree
ARM: mxs: dts: Add rotary encoder to the CFA-10049
ARM: mxs: dts: Add gpio-keys for the rotary to the CFA-10049
ARM: dt: tegra30: Rename "smmu" to "iommu"
ARM: dt: tegra20: Rename "gart" to "iommu"
ARM: dts: mxs: Add the LCD to the 10049 board
ARM: dts: mxs: Add muxing options for the third PWM
ARM: dts: cfa10049: Change the SPI3 bus to spi-gpio
ARM: nomadik: get rid of <mach/hardware.h>
...
Arnd Bergmann [Tue, 19 Feb 2013 16:01:24 +0000 (17:01 +0100)]
Merge branch 'next/soc' into for-next
* next/soc: (145 commits)
ARM: shmobile: r8a7779: Correct TMU clock support again
ARM: prima2: fix __init section for cpu hotplug
arm: socfpga: Add SMP support for actual socfpga harware
arm: Add v7_invalidate_l1 to cache-v7.S
arm: socfpga: Add entries to enable make dtbs socfpga
arm: socfpga: Add new device tree source for actual socfpga HW
ARM: tegra: sort Kconfig selects for Tegra114
ARM: tegra: enable ARCH_REQUIRE_GPIOLIB for Tegra114
ARM: tegra: Fix build error w/ ARCH_TEGRA_114_SOC w/o ARCH_TEGRA_3x_SOC
ARM: tegra: Fix build error for gic update
ARM: tegra: remove empty tegra_smp_init_cpus()
ARM: shmobile: Register ARM architected timer
ARM: MARCO: fix the build issue due to gic-vic-to-irqchip move
ARM: shmobile: r8a7779: Correct TMU clock support
ARM: mxs_defconfig: Select CONFIG_DEVTMPFS_MOUNT
ARM: mxs: decrease mxs_clockevent_device.min_delta_ns to 2 clock cycles
ARM: mxs: use apbx bus clock to drive the timers on timrotv2
ARM: mxs: Update mxs_defconfig
ARM: imx_v6_v7_defconfig: enable anatop regulator and snvs rtc
ARM: imx: support DEBUG_LL uart port selection for all i.MX SoCs
...
Arnd Bergmann [Tue, 19 Feb 2013 16:00:15 +0000 (17:00 +0100)]
Merge branch 'next/multiplatform' into for-next
* next/multiplatform:
net: cwdavinci_cpdma: export symbols for cpsw
remoteproc: omap: depend on OMAP_MBOX_FWK
[media] davinci: do not include mach/hardware.h
ARM: OMAP2+: Make sure files with omap initcalls include soc.h
ARM: OMAP2+: Include soc.h to drm.c to fix compiling
ARM: OMAP2+: Fix warning for hwspinlock omap_postcore_initcall
ARM: multi_v7_defconfig: add ARCH_ZYNQ
ARM: multi_v7_defconfig: remove unnecessary CONFIG_GPIOLIB
arm: vt8500: Remove remaining mach includes
arm: vt8500: Convert debug-macro.S to be multiplatform friendly
arm: vt8500: Remove single platform Kconfig options
ARM: OMAP2+: Remove now obsolete uncompress.h and debug-macro.S
ARM: OMAP2+: Add minimal support for booting vexpress
ARM: OMAP2+: Enable ARCH_MULTIPLATFORM support
ARM: OMAP2+: Disable code that currently does not work with multiplaform
ARM: OMAP2+: Add multiplatform debug_ll support
ARM: OMAP: Fix dmaengine init for multiplatform
ARM: OMAP: Fix i2c cmdline initcall for multiplatform
ARM: OMAP2+: Use omap initcalls
ARM: OMAP2+: Limit omap initcalls to omap only on multiplatform kernels
Arnd Bergmann [Tue, 19 Feb 2013 15:55:15 +0000 (16:55 +0100)]
Merge branch 'next/sh-pinmux' into for-next
* next/sh-pinmux: (81 commits)
sh-pfc: sh_pfc_probe() sizeof() fix
sh-pfc: Move sh_pfc.h from include/linux/ to driver directory
sh-pfc: Remove pinmux_info definition
sh: Remove unused sh_pfc_register_info() function
sh: shx3: pinmux: Use driver-provided pinmux info
sh: sh7786: pinmux: Use driver-provided pinmux info
sh: sh7785: pinmux: Use driver-provided pinmux info
sh: sh7757: pinmux: Use driver-provided pinmux info
sh: sh7734: pinmux: Use driver-provided pinmux info
sh: sh7724: pinmux: Use driver-provided pinmux info
sh: sh7723: pinmux: Use driver-provided pinmux info
sh: sh7722: pinmux: Use driver-provided pinmux info
sh: sh7720: pinmux: Use driver-provided pinmux info
sh: sh7269: pinmux: Use driver-provided pinmux info
sh: sh7264: pinmux: Use driver-provided pinmux info
sh: sh7203: pinmux: Use driver-provided pinmux info
ARM: shmobile: sh73a0: Use driver-provided pinmux info
ARM: shmobile: sh7372: Use driver-provided pinmux info
ARM: shmobile: r8a7779: Use driver-provided pinmux info
ARM: shmobile: r8a7740: Use driver-provided pinmux info
...
Arnd Bergmann [Tue, 19 Feb 2013 15:54:42 +0000 (16:54 +0100)]
Merge branch 'depends/rmk-psci' into for-next
* depends/rmk-psci:
ARM: psci: add support for PSCI invocations from the kernel
ARM: psci: add devicetree binding for describing PSCI firmware
ARM: opcodes: add opcodes definitions for ARM security extensions
ARM: opcodes: add missing include of linux/linkage.h
Arnd Bergmann [Tue, 19 Feb 2013 15:54:02 +0000 (16:54 +0100)]
Merge branch 'depends/rmk-perf' into for-next
* depends/rmk-perf:
ARM: perf: simplify __hw_perf_event_init err handling
ARM: perf: remove unnecessary checks for idx < 0
ARM: perf: handle armpmu_register failing
ARM: perf: don't pretend to support counting of L1I writes
ARM: perf: remove redundant NULL check on cpu_pmu
ARM: Use implementor and part defines from cputype.h
ARM: Define CPU part numbers and implementors
Arnd Bergmann [Tue, 19 Feb 2013 15:53:41 +0000 (16:53 +0100)]
Merge branch 'depends/cleanup' into for-next
* depends/cleanup: (38 commits)
ARM: at91: fix board-rm9200-dt after sys_timer conversion
clocksource: use clockevents_config_and_register() where possible
ARM: use clockevents_config_and_register() where possible
clockevents: export clockevents_config_and_register for module use
timer: vt8500: Move timer code to drivers/clocksource
irqchip: Move ARM vic.h to include/linux/irqchip/arm-vic.h
ARM: picoxcell: use common irqchip_init function
ARM: spear: use common irqchip_init function
irqchip: Move ARM VIC to drivers/irqchip
ARM: samsung: remove unused tick.h
ARM: remove unneeded vic.h includes
ARM: remove mach .handle_irq for VIC users
ARM: VIC: set handle_arch_irq in VIC initialization
ARM: VIC: shrink down vic.h
irqchip: Move ARM gic.h to include/linux/irqchip/arm-gic.h
ARM: use common irqchip_init for GIC init
irqchip: Move ARM GIC to drivers/irqchip
ARM: remove mach .handle_irq for GIC users
ARM: GIC: set handle_arch_irq in GIC initialization
ARM: GIC: remove direct use of gic_raise_softirq
...
Simon Horman [Fri, 15 Feb 2013 13:32:02 +0000 (22:32 +0900)]
ARM: shmobile: r8a7779: Correct TMU clock support again
After discussion on the linux-sh mailing list and reference to the
hardware documentation it appears that 'TMU00', 'TMU01' and 'TMU02'
use a common clock.
The sh_tmu.1 portion of this change resolves a regression introduced in 58079fa7d54a0929d304054ee759187a2ccd3cdf (ARM: shmobile: r8a7779: Correct
TMU clock support) and fixes a regression introduced by that patch. That
patch is queued up for v3.9.
...
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
INFO: rcu_sched self-detected stall on CPUINFO: rcu_sched detected stalls on
+CPUs/tasks: { 1} (detected by 2, t=279640 jiffies, g=4294967052, c=4294967051,
+q=38)
Task dump for CPU 1:
swapper/0 R running 0 1 0 0x00000002
[<c02b8f5c>] (__schedule+0x1b0/0x4c0) from [<c013c590>] (__loop_delay+0x4/0xc)
Linus Torvalds [Mon, 18 Feb 2013 17:58:02 +0000 (09:58 -0800)]
mm: fix pageblock bitmap allocation
Commit c060f943d092 ("mm: use aligned zone start for pfn_to_bitidx
calculation") fixed out calculation of the index into the pageblock
bitmap when a !SPARSEMEM zome was not aligned to pageblock_nr_pages.
However, the _allocation_ of that bitmap had never taken this alignment
requirement into accout, so depending on the exact size and alignment of
the zone, the use of that index could then access past the allocation,
resulting in some very subtle memory corruption.
This was reported (and bisected) by Ingo Molnar: one of his random
config builds would hang with certain very specific kernel command line
options.
In the meantime, commit c060f943d092 has been marked for stable, so this
fix needs to be back-ported to the stable kernels that backported the
commit to use the right alignment.
Olof Johansson [Mon, 18 Feb 2013 00:43:41 +0000 (16:43 -0800)]
Merge tag 'at91-dt-late' of git://github.com/at91linux/linux-at91 into next/dt
From Nicolas Ferre:
More DT modifications for AT91. Now that I am sure that
the drivers modification are picked-up by MTD.
Changes the use ECC to hardware ECC (named PMECC) for
SoCs that are using it and their associated Evaluation Kits:
- at91sam9x5-ek
- at91sam9n12-ek
* tag 'at91-dt-late' of git://github.com/at91linux/linux-at91:
ARM: at91: at91sam9n12: add DT parameters to enable PMECC
ARM: at91: at91sam9x5: add DT parameters to enable PMECC
Olof Johansson [Mon, 18 Feb 2013 00:31:51 +0000 (16:31 -0800)]
Merge tag 'sunxi-dt-for-3.9' of https://github.com/mripard/linux into next/dt
From Maxime Ripard:
Allwinner sunXi DT additions for 3.9
* tag 'sunxi-dt-for-3.9' of https://github.com/mripard/linux:
sunxi: a13-olinuxino: Add user LED to the device tree
sunxi: a10-cubieboard: Add user LEDs to the device tree
ARM: sunxi: Add device tree for Miniand Hackberry
Olof Johansson [Mon, 18 Feb 2013 00:03:12 +0000 (16:03 -0800)]
Merge branch 'next/fixes-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/fixes-non-critical
From Kukjin Kim:
Here is Samsung fixes for v3.9 and it is not a critical fixes.
* 'next/fixes-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: dts: Correct pin configuration of SD 4 for exynos4x12-pinctrl
ARM: SAMSUNG: Silence empty switch warning in fimc-core.h
ARM: SAMSUNG: Silence empty switch warning in sdhci.h
ARM: S5PV210: Fix early uart output in fifo mode
ARM: S3C24XX: Fix compile breakage for SMDK2410
ARM: S3C24XX: add missing platform_device.h include for osiris
ARM: S3C24XX: let S3C2412_PM select S3C2412_PM_SLEEP
ARM: SAMSUNG: Gracefully exit on suspend failure
ARM: SAMSUNG: using vsnprintf instead of vsprintf for the limit buffer length 256
ARM: S3C24XX: Make 'clk_msysclk' static
Gregory CLEMENT [Mon, 4 Feb 2013 17:21:07 +0000 (18:21 +0100)]
arm: mvebu: update defconfig with ATAG support when using DT
Some of the mvebu boards (mainly the development board) come with
plug-in RAM modules. This patch allows to let the bootloaders which
have no support for DTS to give the real amount of memory available on
the board.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
arm: mvebu: enable the SD card slot on Armada 370 Reference Design board
The Armada 370 Reference Design board has one SD card slot, directly
connected to the SDIO IP of the SoC, so we enable this IP. there are no
GPIOs for card-detect and write-protect so we do not specify any.
Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
ARM: dove: convert serial DT nodes to clocks property
of_serial now has support for using clocks property and we have
a DT clock provider. This patch replaces the hard coded clock-frequency
property with a clocks phandle to tclk.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Gregory CLEMENT [Tue, 5 Feb 2013 20:54:55 +0000 (21:54 +0100)]
arm: mvebu: Add SPI flash on Armada 370 DB board
This patch add support for the SPI flash MX25l25635E which is present
on the Armada 370 DB board. This flash stores the bootloader and its
environment.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Ezequiel Garcia [Wed, 6 Feb 2013 13:06:21 +0000 (10:06 -0300)]
arm: mvebu: Add support for SPI controller in Armada 370/XP
The Armada 370 and Armada XP SoC has an SPI controller.
This patch adds support for this controller in Armada 370
and Armada XP SoC common device tree files.
Note that the Armada XP SPI register length is 0x50 bytes,
while Armada 370 SPI register length is 0x28 bytes,
so we choose the smaller of the two.
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Lior Amsalem <alior@marvell.com> Acked-by: Gregory Clement <gregory.clement@free-electrons.com> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Gregory CLEMENT [Fri, 25 Jan 2013 17:32:45 +0000 (18:32 +0100)]
clocksource: update and move armada-370-xp-timer documentation to timer directory
Timer driver for Armada 370 and Armada XP have gained local timers
support. So it needs new resources information regarding the IRQs
and the registers.
Also move the documentation in the new and more accurate directory
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Gregory CLEMENT [Fri, 25 Jan 2013 17:32:42 +0000 (18:32 +0100)]
clocksource: time-armada-370-xp: add local timer support
On the SOCs Armada 370 and Armada XP, each CPU comes with two private
timers. This patch use the timer 0 of each CPU as local timer for the
clockevent if CONFIG_LOCAL_TIMER is selected. In the other case, use
only the private Timer 0 of CPU 0.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Ezequiel Garcia [Wed, 23 Jan 2013 15:26:31 +0000 (12:26 -0300)]
arm: mvebu: Enable USB controllers on Armada 370/XP boards
This patch activates every USB port provided by each SoC.
Except for Armada XP Openblocks AX3-4 board,
where we enable only the first two USB ports
until we have more information on the third one usage.
Cc: Lior Amsalem <alior@marvell.com> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Gregory CLEMENT <gregory.clement@free-electrons.com> Tested-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Tested-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Ezequiel Garcia [Wed, 23 Jan 2013 15:26:30 +0000 (12:26 -0300)]
arm: mvebu: Add support for USB host controllers in Armada 370/XP
The Armada 370 and Armada XP SoC has an Orion EHCI USB controller.
This patch adds support for this controller in Armada 370
and Armada XP SoC common device tree files.
Cc: Lior Amsalem <alior@marvell.com> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Tested-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Tested-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Linus Torvalds [Fri, 15 Feb 2013 20:12:55 +0000 (12:12 -0800)]
Merge tag 'stable/for-linus-3.8-rc7-tag-two' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
Pull xen fixes from Konrad Rzeszutek Wilk:
"Two fixes:
- A simple bug-fix for redundant NULL check.
- CVE-2013-0228/XSA-42: x86/xen: don't assume %ds is usable in
xen_iret for 32-bit PVOPS
and two reverts:
- Revert the PVonHVM kexec. The patch introduces a regression with
older hypervisor stacks, such as Xen 4.1."
* tag 'stable/for-linus-3.8-rc7-tag-two' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
Revert "xen PVonHVM: use E820_Reserved area for shared_info"
Revert "xen/PVonHVM: fix compile warning in init_hvm_pv_info"
xen: remove redundant NULL check before unregister_and_remove_pcpu().
x86/xen: don't assume %ds is usable in xen_iret for 32-bit PVOPS.
Revert "[media] dvb_frontend: return -ENOTTY for unimplement IOCTL"
As reported by Klaus Schmidinger:
"In VDR I use an ioctl() call with FE_READ_UNCORRECTED_BLOCKS on a
device (using stb0899). After this call I check 'errno' for
EOPNOTSUPP to determine whether this device supports this call. This
used to work just fine, until a few months ago I noticed that my
devices using stb0899 didn't display their signal quality in VDR's OSD
any more. After further investigation I found that
ioctl(FE_READ_UNCORRECTED_BLOCKS) no longer returns EOPNOTSUPP, but
rather ENOTTY. And since I stop getting the signal quality in case
any unknown errno value appears, this broke my signal quality query
function."
Linus Torvalds [Fri, 15 Feb 2013 20:04:57 +0000 (12:04 -0800)]
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull one more x86 fix from Peter Anvin:
"Sigh. One more patch in the "please don't brick my Samsung" series"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi: Clear EFI_RUNTIME_SERVICES rather than EFI_BOOT by "noefi" boot parameter
Linus Torvalds [Fri, 15 Feb 2013 20:04:08 +0000 (12:04 -0800)]
Merge tag '3.8-pci-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fix from Bjorn Helgaas:
"This is another fix for v3.8. It fixes an oops that happens when a
Thunderbolt adapter is unplugged (remove device, poll for PME events
on no-longer-existing device, oops)."
* tag '3.8-pci-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI/PM: Clean up PME state when removing a device
Linus Torvalds [Fri, 15 Feb 2013 20:03:09 +0000 (12:03 -0800)]
Merge tag 'omapdss-for-3.8-rc8' of git://gitorious.org/linux-omap-dss2/linux
Pull omapdss fixes from Tomi Valkeinen:
"It'd be great if these two late fixes would still make it into 3.8.
The other one fixes ARM kernel compilation when using 'allyesconfig',
and the other makes DPI displays function again on OMAP3630 boards:
- Fix ARM compilation with "allyesconfig" (omapdrm: fix the
dependency to omapdss)
- fix DPI displays on OMAP3630 (OMAPDSS: add FEAT_DPI_USES_VDDS_DSI
to omap3630_dss_feat_list)"
* tag 'omapdss-for-3.8-rc8' of git://gitorious.org/linux-omap-dss2/linux:
omapdrm: fix the dependency to omapdss
OMAPDSS: add FEAT_DPI_USES_VDDS_DSI to omap3630_dss_feat_list
Linus Torvalds [Fri, 15 Feb 2013 19:59:27 +0000 (11:59 -0800)]
Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c maintainer info update from Wolfram Sang:
"Since my old email and repos are not working anymore, and this already
caused some confusion, I think a MAINTAINERS update for 3.8 is
helpful. So, people trying I2C with the new kernel can properly reach
me and find my repos."
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
MAINTAINERS: change my email and repos
MACH_MX31ADS_WM1133_EV1 already depends on REGULATOR_WM8350,
but that still allows REGULATOR_WM8350 to be a loadable
module. Depending on REGULATOR_WM8350 to be built-in
ensures we cannot create a broken configuration.
Without this patch, building allmodconfig results in:
arch/arm/mach-imx/built-in.o: In function `mx31_wm8350_init':
arch/arm/mach-imx/mach-mx31ads.c:461: undefined reference to `wm8350_register_regulator'
arch/arm/mach-imx/mach-mx31ads.c:471: undefined reference to `wm8350_dcdc_set_slot'
arch/arm/mach-imx/mach-mx31ads.c:473: undefined reference to `wm8350_isink_set_flash'
arch/arm/mach-imx/mach-mx31ads.c:480: undefined reference to `wm8350_dcdc25_set_mode'
arch/arm/mach-imx/mach-mx31ads.c:485: undefined reference to `wm8350_register_led'
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Axel Lin <axel.lin@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Arnd Bergmann [Thu, 14 Feb 2013 16:45:25 +0000 (17:45 +0100)]
ARM: arch_timer: include linux/errno.h
Patch 8a4da6e "arm: arch_timer: move core to drivers/clocksource"
moved a lot of code out of arch_timer.c, but ended up deleting
too much, which broke some configurations.
Obviously, include linux/errno.h is required to return error
values.
Without this patch, building allmodconfig results in:
arch/arm/kernel/arch_timer.c: In function 'arch_timer_sched_clock_init':
arch/arm/kernel/arch_timer.c:55:11: error: 'ENXIO' undeclared (first use in this function)
arch/arm/kernel/arch_timer.c:55:11: note: each undeclared identifier is reported only once for each function it appears in
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com>
Arnd Bergmann [Thu, 14 Feb 2013 16:47:35 +0000 (17:47 +0100)]
ARM: omap2: include linux/errno.h in hwmod_reset
The newly created omap_hwmod_reset.c is missing an
include of linux/errno.h in commit c02060d8 "ARM:
OMAP4+: AESS: enable internal auto-gating during
initial setup". It still works in omap2_defconfig,
but not in all other combinations.
Without this patch, building allmodconfig results in:
arch/arm/mach-omap2/omap_hwmod_reset.c: In function 'omap_hwmod_aess_preprogram':
arch/arm/mach-omap2/omap_hwmod_reset.c:47:11: error: 'EINVAL' undeclared (first use in this function)
arch/arm/mach-omap2/omap_hwmod_reset.c:47:11: note: each undeclared identifier is reported only once for each function it appears in
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Tony Lindgren <tony@atomide.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Sebastien Guiriec <s-guiriec@ti.com>
Arnd Bergmann [Fri, 15 Feb 2013 12:25:20 +0000 (13:25 +0100)]
Merge branch 'omap/multiplatform-fixes', tag 'v3.8-rc5' into next/multiplatform
The omap multiplatform support uncovered a bug in the cwdavinci_cpdma
code and was missing two drivers that are enabled now but are not
quite ready for multiplatform, as found by allyesconfig builds.
There is also a conflict generated by automated merge in
arch/arm/mach-omap2/drm.c between a bug fix that went into v3.8-rc5
and a different version of the same fix that went into the
omap/multiplatform branch. This merge removes the extraneous
#include that was causing build errors.
* omap/multiplatform-fixes:
net: cwdavinci_cpdma: export symbols for cpsw
remoteproc: omap: depend on OMAP_MBOX_FWK
[media] davinci: do not include mach/hardware.h
Arnd Bergmann [Thu, 14 Feb 2013 16:53:01 +0000 (17:53 +0100)]
net: cwdavinci_cpdma: export symbols for cpsw
With the support for ARM AM33xx in multiplatform kernels
in 3.9, an older bug appears in ARM allmodconfig:
When the cpsw driver is built as a module with cpdma
support enabled, it uses symbols that the cpdma driver
does not export.
Without this patch, building allmodconfig results in:
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: David S. Miller <davem@davemloft.net> Cc: Mugunthan V N <mugunthanvnm@ti.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: netdev@vger.kernel.org
Arnd Bergmann [Thu, 14 Feb 2013 16:53:18 +0000 (17:53 +0100)]
remoteproc: omap: depend on OMAP_MBOX_FWK
Patch a62a6e98 "ARM: OMAP2+: Disable code that currently does not work
with multiplaform" makes the OMAP_MBOX_FWK option depend on !MULTIPLATFORM,
which means we cannot simply select that symbol from OMAP_REMOTEPROC.
Turning the 'select' into 'depends on' ensures that all dependencies
are correct until OMAP_MBOX_FWK loses its dependency.
Without this patch, building allmodconfig results in:
drivers/remoteproc/omap_remoteproc.c:31:26: fatal error: plat/mailbox.h: No such file or directory
Arnd Bergmann [Thu, 14 Feb 2013 17:13:15 +0000 (18:13 +0100)]
[media] davinci: do not include mach/hardware.h
It is now possible to build the davinci vpss code
on multiplatform kernels, which causes a problem
since the driver tries to incude the davinci
platform specific mach/hardware.h file. Fortunately
that file is not required at all in the driver,
so we can simply remove the #include statement.
Without this patch, building allyesconfig results in:
drivers/media/platform/davinci/vpss.c:28:27: fatal error: mach/hardware.h: No such file or directory
compilation terminated.
We are doing this b/c on 32-bit PVonHVM with older hypervisors
(Xen 4.1) it ends up bothing up the start_info. This is bad b/c
we use it for the time keeping, and the timekeeping code loops
forever - as the version field never changes. Olaf says to
revert it, so lets do that.
Acked-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Arnd Bergmann [Tue, 27 Nov 2012 09:18:00 +0000 (09:18 +0000)]
scripts/sortextable: silence script output
The exception table sorter outputs one line every time
it gets called, e.g. 'sort done marker at 66dc00', which
is slightly annoying when doing 'make -s' which is otherwise
completely silent. Since that output is not helpful to
most people building the kernel, turn it off by default.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: David Daney <david.daney@cavium.com> Cc: "H. Peter Anvin" <hpa@zytor.com>
A recent cleanup to the mach-osiris.c file is causing build errors
because the i2c-s3c2410.h header file is included before we see
the definition for platform_device. The fix is to make the header file
more robust against inclusion from other places. While this should
normally go through the i2c tree, the bug only exists in arm-soc
at the moment, so it's easier to fix it there before it goes upstream.
Without this patch, building s3c2410_defconfig results in:
arch/arm/mach-s3c24xx/mach-osiris.c:34:0:
include/linux/platform_data/i2c-s3c2410.h:37:26: warning: 'struct platform_device' declared inside parameter list [enabled by default]
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: linux-i2c@vger.kernel.org Cc: Wolfram Sang <w.sang@pengutronix.de> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com>
Arnd Bergmann [Thu, 14 Feb 2013 12:14:53 +0000 (13:14 +0100)]
ARM: mvebu: allow selecting mvebu without Armada XP
Selecting only CONFIG_ARCH_MVEBU but not the respective
options for Armada 370 or Armada XP results in these
link errors:
arch/arm/mach-mvebu/built-in.o: In function `armada_xp_smp_init_cpus':
arch/arm/mach-mvebu/platsmp.c:91: undefined reference to `coherency_get_cpu_count'
arch/arm/mach-mvebu/platsmp.c:104: undefined reference to `armada_mpic_send_doorbell'
arch/arm/mach-mvebu/built-in.o: In function `armada_xp_smp_prepare_cpus':
arch/arm/mach-mvebu/platsmp.c:111: undefined reference to `set_cpu_coherent'
arch/arm/mach-mvebu/built-in.o: In function `armada_xp_boot_secondary':
arch/arm/mach-mvebu/platsmp.c:83: undefined reference to `armada_xp_boot_cpu'
arch/arm/mach-mvebu/built-in.o: In function `armada_xp_secondary_init':
arch/arm/mach-mvebu/platsmp.c:75: undefined reference to `armada_xp_mpic_smp_cpu_init'
arch/arm/mach-mvebu/built-in.o: In function `armada_xp_secondary_startup':
arch/arm/mach-mvebu/headsmp.S:46: undefined reference to `ll_set_cpu_coherent'
We can solve this by enabling all common MVEBU files that are
referenced by the SMP files. This means we enable code that
is not going to be used without a machine descriptor referencing
it, but only if the kernel is configured specifically for this
case.
Arnd Bergmann [Thu, 14 Feb 2013 12:33:36 +0000 (13:33 +0100)]
ARM: pick Versatile by default for !MMU
The introduction of ARCH_MULTIPLATFORM changed
the default for nommu kernels from Versatile to
Integrator, which is less common, and does not
currently build for allnoconfig because that does
not select any of the CPUs.
This also ensures that at least one of the three
board files in versatile are enabled, which lets
us successfully build an allnoconfig kernel.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Russell King <linux@arm.linux.org.uk>
Arnd Bergmann [Thu, 14 Feb 2013 12:43:29 +0000 (13:43 +0100)]
ARM: integrator: fix build with INTEGRATOR_AP off
The conditional declaration of ap_uart_data is broken
and causes this build error:
In file included from arch/arm/mach-integrator/core.c:35:0:
arch/arm/mach-integrator/common.h:6:37: error: expected '=', ',', ';', 'asm' or '__attribute__' before '{' token
Turning the check into an constant-expression if(IS_ENABLED()) statement
creates more readable code and solves this problem as well.
Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Russell King <linux@arm.linux.org.uk>
Arnd Bergmann [Fri, 25 Jan 2013 22:20:40 +0000 (22:20 +0000)]
ARM: sa1100: don't warn about mach/ide.h
This warning has existed since before the start of (git) history.
Apparently nobody has bothered to fix it in a long time, and
this is unlikely to change. Note that the file that the warning
refers to has moved to a different location and was subsequently
deleted in 2008.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Russell King <linux@arm.linux.org.uk>
projects / karo-tx-linux.git / log