rtc: snvs: change timeout to use a fixed number of loop
Andrew Morton <akpm@linux-foundation.org> wrote:
> The timeout code here is fragile. If acquiring the spinlock takes more
> than a millisecond or if this thread gets interrupted or preempted then
> we could easily execute that loop just a single time, and fail.
>
> It would be better to retry a fixed number of times, say 1000? That
> would take around 1 millisecond, but might be overkill.
Take Andrew's suggestion to change the timeout code to retry 1000
times.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Kim Phillips <kim.phillips@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kim, Milo [Fri, 28 Sep 2012 00:20:31 +0000 (10:20 +1000)]
rtc-proc: permit the /proc/driver/rtc device to use other devices
To get time information via /proc/driver/rtc, only the first device (rtc0)
is used. If the rtcN (eg. rtc1 or rtc2) is used for the system clock,
there is no way to get information of rtcN via /proc/driver/rtc. With
this patch, the time data can be retrieved from the system clock RTC.
If the RTC_HCTOSYS_DEVICE is not defined, then rtc0 is used by default.
Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Ben Gardner [Fri, 28 Sep 2012 00:20:30 +0000 (10:20 +1000)]
drivers/rtc/rtc-isl1208.c: add support for the ISL1218
The ISL1218 chip is identical to the ISL1208, except that it has 6
additional user-storage registers. This patch does not enable access to
those additional registers, but only adds the chip name to the list.
Signed-off-by: Ben Gardner <gardner.ben@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Alan Cox [Fri, 28 Sep 2012 00:20:30 +0000 (10:20 +1000)]
binfmt_elf: Uninitialized variable
load_elf_interp() has interp_map_addr carefully described as
"uninitialized_var" and marked so as to avoid a warning. However if you
trace the code it is passed into load_elf_interp and then this value is
checked against NULL.
As this return value isn't used this is actually safe but it freaks
various analysis tools that see un-initialized memory addresses being read
before their value is ever defined.
Set it to NULL as a matter of programming good taste if nothing else
Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Paton J. Lewis [Fri, 28 Sep 2012 00:20:30 +0000 (10:20 +1000)]
epoll: support for disabling items, and a self-test app
Enhanced epoll_ctl to support EPOLL_CTL_DISABLE, which disables an epoll
item. If epoll_ctl doesn't return -EBUSY in this case, it is then safe to
delete the epoll item in a multi-threaded environment. Also added a new
test_epoll self- test app to both demonstrate the need for this feature
and test it.
Signed-off-by: Paton J. Lewis <palewis@adobe.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Jason Baron <jbaron@redhat.com> Cc: Paul Holland <pholland@adobe.com> Cc: Davide Libenzi <davidel@xmailserver.org> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Joe Perches [Fri, 28 Sep 2012 00:20:29 +0000 (10:20 +1000)]
CodingStyle: add networking specific block comment style
The block comment style in net/ and drivers/net is non-standard.
Document it.
Signed-off-by: Joe Perches <joe@perches.com> Cc: "Allan, Bruce W" <bruce.w.allan@intel.com> Cc: Andy Whitcroft <apw@canonical.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Joe Perches [Fri, 28 Sep 2012 00:20:29 +0000 (10:20 +1000)]
checkpatch: check networking specific block comment style
In an effort to get fewer checkpatch reviewer corrections, add a
networking specific style test for the preferred networking comment style.
/* The preferred style for block comments in
* drivers/net/... and net/... is like this
*/
These tests are only used in net/ and drivers/net/
Tested with:
$ cat drivers/net/t.c
/* foo */
/*
* foo
*/
/* foo
*/
/* foo
* bar */
$ ./scripts/checkpatch.pl -f drivers/net/t.c
WARNING: networking block comments don't use an empty /* line, use /* Comment...
#4: FILE: net/t.c:4:
+
+/*
WARNING: networking block comments put the trailing */ on a separate line
#12: FILE: net/t.c:12:
+ * bar */
total: 0 errors, 2 warnings, 12 lines checked
Signed-off-by: Joe Perches <joe@perches.com> Cc: "Allan, Bruce W" <bruce.w.allan@intel.com> Cc: Andy Whitcroft <apw@canonical.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Joe Perches [Fri, 28 Sep 2012 00:20:29 +0000 (10:20 +1000)]
checkpatch: update suggested printk conversions
Direct conversion of printk(KERN_<LEVEL>... to pr_<level> isn't the
preferred conversion when a struct net_device or struct device is
available.
Hint that using netdev_<level> or dev_<level> is preferred to using
pr_<level>. Add netdev_dbg and dev_dbg variants too.
Miscellaneous whitespace neatening of a misplaced close brace.
Signed-off-by: Joe Perches <joe@perches.com> Cc: Andy Whitcroft <apw@canonical.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pasi Savanainen [Fri, 28 Sep 2012 00:20:28 +0000 (10:20 +1000)]
checkpatch: check utf-8 content from a commit log when it's missing from charset
Check that a commit log doesn't contain UTF-8 when a mail header
explicitly defines a different charset, like
'Content-Type: text/plain; charset="us-ascii"'
Signed-off-by: Pasi Savanainen <pasi.savanainen@nixu.com> Cc: Joe Perches <joe@perches.com> Cc: Andy Whitcroft <apw@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
scatterlist: atomic sg_mapping_iter() no longer needs disabled IRQs
SG mapping iterator w/ SG_MITER_ATOMIC set required IRQ disabled because
it originally used KM_BIO_SRC_IRQ to allow use from IRQ handlers.
kmap_atomic() has long been updated to handle stacking atomic mapping
requests on per-cpu basis and only requires not sleeping while mapped.
Update sg_mapping_iter such that atomic iterators only require disabling
preemption instead of disabling IRQ.
While at it, convert wte weird @ARG@ notations to @ARG in the comment of
sg_miter_start().
Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Maxim Levitsky <maximlevitsky@gmail.com> Cc: Alex Dubov <oakad@yahoo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
lib/plist.c: make plist test announcements KERN_DEBUG
They show up in dmesg
[ 4.041094] start plist test
[ 4.045804] end plist test
without a lot of meaning so hide them behind debug loglevel.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jan Beulich [Fri, 28 Sep 2012 00:20:26 +0000 (10:20 +1000)]
lib/vsprintf.c: improve standard conformance of sscanf()
Xen's pciback points out a couple of deficiencies with vsscanf()'s
standard conformance:
- Trailing character matching cannot be checked by the caller: With a
format string of "(%x:%x.%x) %n" absence of the closing parenthesis
cannot be checked, as input of "(00:00.0)" doesn't cause the %n to be
evaluated (because of the code not skipping white space before the
trailing %n).
- The parameter corresponding to a trailing %n could get filled even if
there was a matching error: With a format string of "(%x:%x.%x)%n",
input of "(00:00.0]" would still fill the respective variable pointed to
(and hence again make the mismatch non-detectable by the caller).
This patch aims at fixing those, but leaves other non-conforming aspects
of it untouched, among them these possibly relevant ones:
- improper handling of the assignment suppression character '*' (blindly
discarding all succeeding non-white space from the format and input
strings),
- not honoring conversion specifiers for %n, - not recognizing the C99
conversion specifier 't' (recognized by vsprintf()).
Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
lib/spinlock_debug: avoid livelock in do_raw_spin_lock()
The logic in do_raw_spin_lock() attempts to acquire a spinlock by invoking
arch_spin_trylock() in a loop with a delay between each attempt. Now
consider the following situation in a 2 CPU system:
1. CPU-0 continually acquires and releases a spinlock in a
tight loop; it stays in this loop until some condition X
is satisfied. X can only be satisfied by another CPU.
2. CPU-1 tries to acquire the same spinlock, in an attempt
to satisfy the aforementioned condition X. However, it
never sees the unlocked value of the lock because the
debug spinlock code uses trylock instead of just lock;
it checks at all the wrong moments - whenever CPU-0 has
locked the lock.
Now in the absence of debug spinlocks, the architecture specific spinlock
code can correctly allow CPU-1 to wait in a "queue" (e.g., ticket
spinlocks), ensuring that it acquires the lock at some point. However,
with the debug spinlock code, livelock can easily occur due to the use of
try_lock, which obviously cannot put the CPU in that "queue". This
queueing mechanism is implemented in both x86 and ARM spinlock code.
Note that the situation mentioned above is not hypothetical. A real
problem was encountered where CPU-0 was running hrtimer_cancel with
interrupts disabled, and CPU-1 was attempting to run the hrtimer that
CPU-0 was trying to cancel.
Address this by actually attempting arch_spin_lock once it is suspected
that there is a spinlock lockup. If we're in a situation that is
described above, the arch_spin_lock should succeed; otherwise other
timeout mechanisms (e.g., watchdog) should alert the system of a lockup.
Therefore, if there is a genuine system problem and the spinlock can't be
acquired, the end result (irrespective of this change being present) is
the same. If there is a livelock caused by the debug code, this change
will allow the lock to be acquired, depending on the implementation of the
lower level arch specific spinlock code.
Signed-off-by: Vikram Mulukutla <markivx@codeaurora.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
genalloc: make it possible to use a custom allocation algorithm
Premit use of another algorithm than the default first-fit one. For
example a custom algorithm could be used to manage alignment requirements.
As I can't predict all the possible requirements/needs for all allocation
uses cases, I add a "free" field 'void *data' to pass any needed
information to the allocation function. For example 'data' could be used
to handle a structure where you store the alignment, the expected memory
bank, the requester device, or any information that could influence the
allocation algorithm.
An usage example may look like this:
struct my_pool_constraints {
int align;
int bank;
...
};
unsigned long my_custom_algo(unsigned long *map, unsigned long size,
unsigned long start, unsigned int nr, void *data)
{
struct my_pool_constraints *constraints = data;
...
deal with allocation contraints
...
return the index in bitmap where perform the allocation
}
Add of best-fit algorithm function:
most of the time best-fit is slower then first-fit but memory fragmentation
is lower. The random buffer allocation/free tests don't show any arithmetic
relation between the allocation time and fragmentation but the
best-fit algorithm
is sometime able to perform the allocation when the first-fit can't.
This new algorithm help to remove static allocations on ESRAM, a small but
fast on-chip RAM of few KB, used for high-performance uses cases like DMA
linked lists, graphic accelerators, encoders/decoders. On the Ux500
(in the ARM tree) we have define 5 ESRAM banks of 128 KB each and use of
static allocations becomes unmaintainable:
cd arch/arm/mach-ux500 && grep -r ESRAM .
./include/mach/db8500-regs.h:/* Base address and bank offsets for ESRAM */
./include/mach/db8500-regs.h:#define U8500_ESRAM_BASE 0x40000000
./include/mach/db8500-regs.h:#define U8500_ESRAM_BANK_SIZE 0x00020000
./include/mach/db8500-regs.h:#define U8500_ESRAM_BANK0 U8500_ESRAM_BASE
./include/mach/db8500-regs.h:#define U8500_ESRAM_BANK1 (U8500_ESRAM_BASE + U8500_ESRAM_BANK_SIZE)
./include/mach/db8500-regs.h:#define U8500_ESRAM_BANK2 (U8500_ESRAM_BANK1 + U8500_ESRAM_BANK_SIZE)
./include/mach/db8500-regs.h:#define U8500_ESRAM_BANK3 (U8500_ESRAM_BANK2 + U8500_ESRAM_BANK_SIZE)
./include/mach/db8500-regs.h:#define U8500_ESRAM_BANK4 (U8500_ESRAM_BANK3 + U8500_ESRAM_BANK_SIZE)
./include/mach/db8500-regs.h:#define U8500_ESRAM_DMA_LCPA_OFFSET 0x10000
./include/mach/db8500-regs.h:#define U8500_DMA_LCPA_BASE
(U8500_ESRAM_BANK0 + U8500_ESRAM_DMA_LCPA_OFFSET)
./include/mach/db8500-regs.h:#define U8500_DMA_LCLA_BASE U8500_ESRAM_BANK4
I want to use genalloc to do dynamic allocations but I need to be able to
fine tune the allocation algorithm. I my case best-fit algorithm give
better results than first-fit, but it will not be true for every use case.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@stericsson.com> Cc: Huang Ying <ying.huang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jan Beulich [Fri, 28 Sep 2012 00:20:24 +0000 (10:20 +1000)]
lib/Kconfig.debug: adjust hard-lockup related Kconfig options
The main option should not appear in the resulting .config when the
dependencies aren't met (i.e. use "depends on" rather than directly
setting the default from the combined dependency values).
The sub-options should depend on the main option rather than a more
generic higher level one.
Signed-off-by: Jan Beulich <jbeulich@suse.com> Acked-by: Don Zickus <dzickus@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Alex Elder [Fri, 28 Sep 2012 00:20:24 +0000 (10:20 +1000)]
lib/parser.c: avoid overflow in match_number()
The result of converting an integer value to another signed integer type
that's unable to represent the original value is implementation defined.
(See notes in section 6.3.1.3 of the C standard.)
In match_number(), the result of simple_strtol() (which returns type long)
is assigned to a value of type int.
Instead, handle the result of simple_strtol() in a well-defined way, and
return -ERANGE if the result won't fit in the int variable used to hold
the parsed result.
No current callers pay attention to the particular error value returned,
so this additional return code shouldn't do any harm.
Signed-off-by: Alex Elder <elder@inktank.com> Cc: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
IB/mlx4: fix for MAX_ID_MASK to MAX_IDR_MASK name change
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Roland Dreier <roland@purestorage.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
drivers/net/ethernet/dec/tulip: Use standard __set_bit_le() function
To introduce generic set_bit_le() later, we remove our own definition
and use a proper non-atomic bitops function: __set_bit_le().
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp> Acked-by: Grant Grundler <grundler@parisc-linux.org> Cc: David Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Ben Hutchings [Fri, 28 Sep 2012 00:20:20 +0000 (10:20 +1000)]
drivers/net/ethernet/sfc: use standard __{clear,set}_bit_le() functions
There are now standard functions for dealing with little-endian bit
arrays, so use them instead of our own implementations.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp> Cc: David Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
pwm_backlight: add device tree support for Low Threshold Brightness
Some backlights perform poorly when driven by a PWM with a short
duty-cycle. For such devices, the low threshold can be used to specify a
lower bound for the duty-cycle and should be chosen to exclude the
problematic range.
Add device tree probing support for
platform_pwm_backlight_data,lth_brightness, putting
low-threshold-brightness as the optional property's name.
Signed-off-by: Philip, Avinash <avinashphilip@ti.com> Cc: Thierry Reding <thierry.reding@avionic-design.de> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This driver was for the ProGear webpad device which was produced in
2000/2001 and is not available on a market. I no longer have this
hardware so can not even check how Linux works on it.
Signed-off-by: Marcin Juszkiewicz <marcin@juszkiewicz.com.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This driver is a general version for LM3639 backlgiht + flash driver chip
of TI.
LM3639:
The LM3639 is a single chip LCD Display Backlight driver + white LED
Camera driver. Programming is done over an I2C compatible interface.
www.ti.com
Signed-off-by: G.Shark Jeong <gshark.jeong@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Daniel Jeong <daniel.jeong@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This driver is a general version for LM3630 backlgiht driver chip of TI.
LM3630 :
The LM3630 is a current mode boost converter which supplies the power
and controls the current in two strings of up to 10 LEDs per string.
Programming is done over an I2C compatible interface.
www.ti.com
Signed-off-by: G.Shark Jeong <gshark.jeong@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Daniel Jeong <daniel.jeong@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jingoo Han [Fri, 28 Sep 2012 00:20:16 +0000 (10:20 +1000)]
drivers/video/backlight/kb3886_bl.c: use usleep_range() instead of msleep() for small sleeps
Since msleep() might not sleep for the desired amount when less than 20ms,
use usleep_range().
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Claudio Nieder <private@claudio.ch> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Sachin Kamat <sachin.kamat@linaro.org> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jingoo Han [Fri, 28 Sep 2012 00:20:16 +0000 (10:20 +1000)]
drivers/video/backlight/ltv350qv.c: use usleep_range() instead of msleep() for small sleeps
Since msleep() might not sleep for the desired amount when less than 20ms,
use usleep_range().
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Sachin Kamat <sachin.kamat@linaro.org> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jingoo Han [Fri, 28 Sep 2012 00:20:16 +0000 (10:20 +1000)]
drivers/video/backlight/da9052_bl.c: use usleep_range() instead of msleep() for small sleeps
Since msleep() might not sleep for the desired amount when less than 20ms,
use usleep_range().
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Ashish Jangam <ashish.jangam@kpitcummins.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Sachin Kamat <sachin.kamat@linaro.org> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Joe Perches [Fri, 28 Sep 2012 00:20:15 +0000 (10:20 +1000)]
MAINTAINERS: Update gianfar_ptp after renaming
commit ec21e2ec36769 ("freescale: Move the Freescale drivers")
moved the files, update the pattern.
Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Andy Shevchenko [Fri, 28 Sep 2012 00:20:14 +0000 (10:20 +1000)]
lib/vsprintf: update documentation to cover all of %p[Mm][FR]
Acked-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
George Spelvin [Fri, 28 Sep 2012 00:20:13 +0000 (10:20 +1000)]
lib-vsprintf-optimize-put_dec_trunc8-fix
Rabin Vincent <rabin@rab.in> wrote:
> This patch breaks IP address printing with "%pI4" (and by extension,
> nfsroot). Example:
>
> - Before: 10.0.0.1
> - After: 10...1
Mea culpa, and thank you for catching it! As I said in my earlier
comment, I tested this most extensively wrapped by some sprintf code
that liked 0 converted to a 0-length string, as that works naturally
with the ANSI spec for %.0u. And it turns out not to matter for the
usual printf code, as num_to_str special-cases that anyway.
The fix is straightforward:
Signed-off-by: George Spelvin <linux@horizon.com> Cc: Rabin Vincent <rabin@rab.in> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
orderly_poweroff is trying to poweroff platform in two steps:
step 1: Call user space application to poweroff
step 2: If user space poweroff fail, then do a force power off if force param
is set.
The bug here is, step 1 is always successful with param UMH_NO_WAIT, which obey
the design goal of orderly_poweroff.
We have two choices here:
UMH_WAIT_EXEC which means wait for the exec, but not the process;
UMH_WAIT_PROC which means wait for the process to complete.
we need to trade off the two choices:
If using UMH_WAIT_EXEC, there is potential issue comments by Serge E.
Hallyn: The exec will have started, but may for whatever (very unlikely)
reason fail.
If using UMH_WAIT_PROC, there is potential issue comments by Eric W.
Biederman: If the caller is not running in a kernel thread then we can
easily get into a case where the user space caller will block waiting for
us when we are waiting for the user space caller.
Thanks for their excellent ideas, based on the above discussion, we
finally choose UMH_WAIT_EXEC, which is much more safe, if the user
application really fails, we just complain the application itself, it
seems a better choice here.
Signed-off-by: Feng Hong <hongfeng@marvell.com> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
kernel/sys.c: call disable_nonboot_cpus() in kernel_restart()
As kernel_power_off() calls disable_nonboot_cpus(), we may also want to
have kernel_restart() call disable_nonboot_cpus(). Doing so can help
machines that require boot cpu be the last alive cpu during reboot to
survive with kernel restart.
This fixes one reboot issue seen on imx6q (Cortex-A9 Quad). The machine
requires that the restart routine be run on the primary cpu rather than
secondary ones. Otherwise, the secondary core running the restart routine
will fail to come to online after reboot.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Historically, the top three bytes of personality have been used for things
such as ADDR_NO_RANDOMIZE, which made sense only for specific
architectures.
We now however have a flag there that is general no matter the
architecture (UNAME26); generally we have to be careful to preserve the
personality flags across exec().
This patch fixes tile architecture not to forcefully overwrite personality
flags during exec().
In addition to that, we fix two other things along the way:
- exec_domain switching is fixed -- set_personality() should always
be used instead of directly assigning to current->personality.
- as pointed out by Arnd Bergmann, PER_LINUX_32BIT is not used anywhere
by tile, so let's just drop that in favor of PER_LINUX
Signed-off-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
cross-arch: don't corrupt personality flags upon exec()
Historically, the top three bytes of personality have been used for things
such as ADDR_NO_RANDOMIZE, which made sense only for specific
architectures.
We now however have a flag there that is general no matter the
architecture (UNAME26); generally we have to be careful to preserve the
personality flags across exec().
This patch tries to fix all architectures that forcefully overwrite
personality flags during exec() (ppc32 and s390 have been fixed recently
by commits f9783ec86 and 59e4c3a2f in a similar way already).
Signed-off-by: Jiri Kosina <jkosina@suse.cz> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Mark Salter <msalter@redhat.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: David Howells <dhowells@redhat.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Michal Simek <monstr@monstr.eu> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Chen Liqin <liqin.chen@sunplusct.com> Cc: Lennox Wu <lennox.wu@gmail.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Zankel <chris@zankel.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit 6afe1a1fe8ff83f6a ("PM: Remove legacy PM") removed the
initialization of retval, causing:
arch/frv/kernel/pm.c: In function 'sysctl_pm_do_suspend':
arch/frv/kernel/pm.c:165:5: warning: 'retval' may be used uninitialized in this function [-Wuninitialized]
Remove the variable completely to fix this, and convert to a proper
switch (...) { ... } construct to improve readability.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Joe Mario [Fri, 28 Sep 2012 00:20:10 +0000 (10:20 +1000)]
sections: fix const sections for crc32 table
Fix the const sections for the code generated by crc32 table. There's no
ro version of the cacheline aligned section, so we cannot put in const
data without a conflict Just don't make the crc tables const for now.
[ak@linux.intel.com: some fixes and new description] Signed-off-by: Joe Mario <jmario@redhat.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Oliver Hartkopp <socketcan@hartkopp.net> Cc: David Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
sections: fix section conflicts in drivers/net/wan
Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Krzysztof Halasa <khc@pm.waw.pl> Cc: David Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The PA-RISC tool chain seems to have some problem with correct read/write
attributes on sections. This causes problems when the const sections
are fixed up for other architecture to only contain truly read-only
data.
Minchan Kim [Fri, 28 Sep 2012 00:20:00 +0000 (10:20 +1000)]
cma: decrease cc.nr_migratepages after reclaiming pagelist
reclaim_clean_pages_from_list() reclaims clean pages before migration so
cc.nr_migratepages should be updated. Currently, there is no problem but
it can be wrong if we try to use the value in future.
Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Minchan Kim [Fri, 28 Sep 2012 00:20:00 +0000 (10:20 +1000)]
CMA: migrate mlocked pages
Presently CMA cannot migrate mlocked pages so it ends up failing to allocate
contiguous memory space.
This patch makes mlocked pages be migrated out. Of course, it can affect
realtime processes but in CMA usecase, contiguous memory allocation failing
is far worse than access latency to an mlocked page being variable while
CMA is running. If someone wants to make the system realtime, he shouldn't
enable CMA because stalls can still happen at random times.
Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
projects / karo-tx-linux.git / log