staging:iio: Add an iio channel type string to support proximity sensors.
Add "proximity" to the iio_chan_type_name_spec_shared string list to
support proximity sensors.
Now this list fully matches the declared iio_chan_type enums.
staging:iio:light:isl29018: Fix the "Init of isl29018 fails" failure.
The I2C clientdata is set to indio_dev instead of chip as of a couple weeks ago.
Correct the calls to i2c_get_clientdata() accordingly.
Otherwise the driver fails to initialize.
Dan Carpenter [Fri, 8 Jul 2011 07:25:40 +0000 (10:25 +0300)]
Staging: tm6000: remove unneeded check in get_next_buf()
We dereference "buf" on the line before so if it were NULL here we
would have OOPsed earlier. Also list_entry() never returns NULL.
And finally, we handled the situation where the list is empty
earlier in the function.
So this test isn't needed and I've removed it.
Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mark Einon [Thu, 7 Jul 2011 22:38:58 +0000 (23:38 +0100)]
staging: et131x: et1310_mac.c: ConfigMacStatRegs() add missing regs to be zeroed
The comment at the top of the function states 'we need to initialize all the macstat registers to zero', but not all macstat registers are zeroed. Zero the missing registers.
Tested on an ET-131x device.
Signed-off-by: Mark Einon <mark.einon@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
sst: avoid unnecessary firmware reloading for MRST
SST HW on MRST doesn't need to reload the firmware during suspend/resume
cycle, so remove the extra workload. This also fix a bug that the firmware
sample rate can't be modified when there is no active playback/capture
stream.
Lu Guanqun [Fri, 8 Jul 2011 08:59:10 +0000 (09:59 +0100)]
sst: report correct jack event
The status of jack event is compared bitwise:
[in sound/core/jack.c:snd_jack_report()]
for (i = 0; i < ARRAY_SIZE(jack_switch_types); i++) {
int testbit = 1 << i;
if (jack->type & testbit)
input_report_switch(jack->input_dev,
jack_switch_types[i],
status & testbit);
}
So in order to report the correct events, 3 should be passed instead of 1.
Signed-off-by: Lu Guanqun <guanqun.lu@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
A bug that I created due to using simply expanding variables in the
makefiles. Although only unexpanded paths are at issue here, I decided
to use recursively expanding variables on all of the parameterized
values.
Signed-off-by: matt mooney <mfm@muteddisk.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
matt mooney [Thu, 7 Jul 2011 07:31:50 +0000 (00:31 -0700)]
staging: usbip: userspace: usbipd: major cleanup of daemon
Reorganize, rename [for clarity and to remove stub_driver
references], modify output messages, and cleanup coding style;
nevertheless, the actual implementation is pretty much untouched.
Signed-off-by: matt mooney <mfm@muteddisk.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Cox [Fri, 8 Jul 2011 08:43:45 +0000 (09:43 +0100)]
gma500: Fix symbol clash with i915
Randy Dunlap reports:
| when both CONFIG_DRM_I915=y and CONFIG_DRM_PSB=y:
| drivers/staging/built-in.o: In function `intel_opregion_init':
| (.text+0x47943): multiple definition of `intel_opregion_init'
| drivers/gpu/built-in.o:(.text+0x17277a): first defined here
Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Remove unneeded version.h includes from drivers/staging/gma500/
It was pointed out by 'make versioncheck' that some includes of
linux/version.h are not needed in drivers/staging/gma500/.
This patch removes them.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
[updated for all th file cleanup and movement] Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Delete the drivers/staging/tty drivers as no one has wanted to step up
and maintain and fix them. This was discussed in commit 4a6514e6d096716fb7bedf238efaaca877e2a7e8 (tty: move obsolete and broken
tty drivers to drivers/staging/tty/)
No one has steped up to claim them, so as described in commit 4c37705877e74c02c968735c2eee0f84914cf557 (tty: move obsolete and broken
generic_serial drivers to drivers/staging/generic_serial/), they are now
deleted from the system.
It doesn't build anymore, no one is working on it, and, according to the
developers, there's a different one that is working and in the real part
of the kernel already.
Acked-by: David Brown <davidb@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Pavel Roskin [Wed, 6 Jul 2011 14:15:44 +0000 (10:15 -0400)]
staging: comedi: remove COMEDI_DEVICE_CREATE macro, expand all callers
This is no longer needed as the code is now in the main kernel tree.
Signed-off-by: Pavel Roskin <proski@gnu.org> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
When build userspace code, got the following error message:
make[2]: Entering directory `/usr/src/staging-2.6/drivers/staging/usbip/userspace/src'
CC usbip.o
...
CCLD usbip
CC usbipd.o
usbipd.c:30:25: fatal error: stub_driver.h: No such file or directory
compilation terminated.
make[2]: *** [usbipd.o] Error 1
make[2]: Leaving directory `/usr/src/staging-2.6/drivers/staging/usbip/userspace/src'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/usr/src/staging-2.6/drivers/staging/usbip/userspace'
make: *** [all] Error 2
Due to commit 756d6726 and a16941ae, stub_driver had been changed
into host_driver, so update header filename and functions name to
fix these build errors
Signed-off-by: David Chang <dchang@novell.com> CC: Joe Perches <joe@perches.com> Cc: matt mooney <mfm@muteddisk.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Bryan Freed [Tue, 28 Jun 2011 23:46:33 +0000 (16:46 -0700)]
staging: iio: light sensor: Add a calibscale file to the isl29018 light sensor driver.
Defaulting to 1, this gives a way to amplify the lux value before being
reduced by the programmed adc_bit shift.
Only support whole numbers right now. When this driver is converted to the new
IIO_CHAN framework, it will be easy to support the framework's pseudo float.
Add illuminance0_calibscale documentation to sysfs-bus-iio-light.
Signed-off-by: Bryan Freed <bfreed@chromium.org> Acked-by: Rhyland Klein <rklein@nvidia.com> Acked-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Dan Carpenter [Wed, 29 Jun 2011 19:50:48 +0000 (22:50 +0300)]
Staging: iio: some uninitialized variable bugs
There were some uninitialized variable warnings in iio. Two of
these came from the recent changes to how the private data was
allocated in 83f0422dc6a16 "staging:iio:accel:sca3000: allocate
state in iio_dev and use iio_priv to access."
drivers/staging/iio/accel/sca3000_core.c: In function 'sca3000_probe':
drivers/staging/iio/accel/sca3000_core.c:1137:9: warning: 'st' may be used uninitialized in this function
drivers/staging/iio/adc/ad7291.c: In function 'ad7291_probe':
drivers/staging/iio/adc/ad7291.c:805:15: warning: 'chip' may be used uninitialized in this function
drivers/staging/iio/dac/ad5624r_spi.c: In function 'ad5624r_probe':
drivers/staging/iio/dac/ad5624r_spi.c:228:24: warning: 'st' may be used uninitialized in this function
Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Linus Walleij [Thu, 30 Jun 2011 06:31:59 +0000 (08:31 +0200)]
staging: ste_rmi4: remove cross-dependent platform data
The ux500 machine was actually defining platform data for the
staging driver ste_rmi4, which is not OK. Let us instead define
some __weak platform data in the machine so that the staging
driver can override it at compile-time and we can thus have the
driver self-contained in staging.
Reported-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Tobias Klauser [Fri, 24 Jun 2011 13:48:47 +0000 (15:48 +0200)]
Staging: usbip: vhci-hcd: Do not kill already dead RX/TX kthread
When unbinding a device on the host which was still attached on the
client, I got a NULL pointer dereference on the client. This turned out
to be due to kthread_stop() being called on an already dead kthread.
Delay the printing of the output header until the list is received
from the remote host. This allows notification that the host does not
have any exportable devices.
Signed-off-by: matt mooney <mfm@muteddisk.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
matt mooney [Mon, 20 Jun 2011 05:44:43 +0000 (22:44 -0700)]
staging: usbip: userspace: usbip_unbind.c: implement using libsysfs
Modify unbind to use libsysfs, and include a check to verify that the
device is actually using usbip-host before proceeding. The output
messages have been changed to be consistent with `usbip bind'.
Signed-off-by: matt mooney <mfm@muteddisk.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
matt mooney [Mon, 20 Jun 2011 05:44:42 +0000 (22:44 -0700)]
staging: usbip: userspace: usbip_bind.c: major rewrite of the implementation
Rewrite functions in terms of libsysfs, which eliminates a lot of
helper functions simplifying the file layout. Now, the two processes
taking place here, an unbind of the old driver and a bind of
usbip-host, are single functions and have been renamed along with the
controlling function. A check to see if the device is already bound to
usbip-host is now included.
Signed-off-by: matt mooney <mfm@muteddisk.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
matt mooney [Mon, 20 Jun 2011 05:44:38 +0000 (22:44 -0700)]
staging: usbip: userspace: libsrc: change all output messages to debug
The library should not be displaying random messages intermixed with
those from the programs that use them. So, instead, change all of the
output from the library to debug only, and allow the programs to
decide what to tell the user. This also changes the messages to use
the same form, which makes understanding them easier.
Signed-off-by: matt mooney <mfm@muteddisk.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
matt mooney [Mon, 20 Jun 2011 05:44:37 +0000 (22:44 -0700)]
staging: usbip: userspace: libsrc: remove usbip.h
Remove the library version of usbip.h because its sole purpose was to
include other headers, which is bad practice. Also modify include
guards for consistency.
Signed-off-by: matt mooney <mfm@muteddisk.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Larry Finger [Fri, 24 Jun 2011 22:03:12 +0000 (17:03 -0500)]
staging: rtl8192u: Fix big-endian warning
When compiling the rtl8192u driver from staging on a big-endian
architecture, the following warning results:
CC [M] drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.o
drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c: In function 'ieee80211_probe_resp':
drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c:780: warning: value computed is not used
The warning is due to misuse of cpu_to_le16().
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Larry Finger [Fri, 24 Jun 2011 22:02:54 +0000 (17:02 -0500)]
staging: rtl8192e: Fix big-endian warning
When compiling the rtl8192e driver from staging on a big-endian
architecture, the following warning results:
CC [M] drivers/staging/rtl8192e/ieee80211/ieee80211_softmac.o
drivers/staging/rtl8192e/ieee80211/ieee80211_softmac.c: In function 'ieee80211_probe_resp':
drivers/staging/rtl8192e/ieee80211/ieee80211_softmac.c:781: warning: value computed is not used
The warning is due to misuse of cpu_to_le16().
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Larry Finger [Fri, 24 Jun 2011 22:02:27 +0000 (17:02 -0500)]
staging: rtl8187se: Fix big-endian warning
When compiling the rtl8187se driver from staging on a big-endian
architecture, the following warning results:
CC [M] drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.o
drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c: In function 'ieee80211_probe_resp':
drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c:824: warning: value computed is not used
The warning is due to misuse of cpu_to_le16().
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
matt mooney [Thu, 16 Jun 2011 09:24:57 +0000 (02:24 -0700)]
staging: usbip: userspace: remove usb.ids file
Inclusion of the usb.ids file is redundant. USBIDS_DIR is set in
configure.ac to a default of /usr/share/hwdata/. This can be
overridden using `./configure --with-usbids-dir=<dir>'.
Signed-off-by: matt mooney <mfm@muteddisk.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Márton Németh [Tue, 14 Jun 2011 06:28:26 +0000 (08:28 +0200)]
usbip: dump the port status difference
At the beginning of vhci_hub_control() function the port
status is saved to show what are the differences between the
previous and the new status. Change the dump function to
really show the differences in the status bit changes: put
a '+' sign before the symbolic name of a bit where a bit
was set, a '-' sign where the bit was cleared and a SPACE
where the bit was not changed. This is similar to the way
"diff -u" shows the changes and easy to understand.
Signed-off-by: Márton Németh <nm127@freemail.hu> Cc: Joe Perches <joe@perches.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Márton Németh [Mon, 13 Jun 2011 21:47:39 +0000 (23:47 +0200)]
usbip: only dump valid port status
The wIndex parameter of vhci_hub_control() is always zero when the
request type is GetHubDescriptor, see drivers/usb/core/hub.c::get_hub_descriptor()
and Universal Serial Bus Specification revision 2.0 (April 27, 2000) Section
11.24.2.5 "Get Hub Descriptor". This means the variable rhport will not contain
any useful index. Only use valid rhport values.
Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mark Einon [Sun, 3 Jul 2011 17:08:22 +0000 (18:08 +0100)]
staging: et131x: Fix stats->rx_packets accounting
The net_device_stats->rx_packets counter is not getting updated.
This is due to checking a fMP_ADAPTER_LINK_DETECTION flag prior to
updating which is never set.
Solved by using netif_carrier_ok() to test for a link, and removing
the fMP_ADAPTER_LINK_DETECTION flag, which looks to be a broken
mechanism.
Signed-off-by: Mark Einon <mark.einon@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
staging: brcm80211: remove several externs from dhd_linux.c
The script checkpatch.pl flagged for some extern variables in
dhd_linux.c source. Several have been fixed in this patch. Two
remaining are in macro conditional code that needs cleanup so
they are not resolved here.
Reviewed-by: Roland Vossen <rvossen@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
projects / linux-beck.git / log