Benjamin Romer [Tue, 4 Nov 2014 16:25:19 +0000 (11:25 -0500)]
staging: unisys: fix line over 80 characters in mapit()
The error output in mapit() in memregion_direct.c has variables past the 80
character limit. Move them to the next line, but the string constant will still
go past the limit, and that's okay.
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge tag 'iio-for-3.19a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
First round of new drivers, features and cleanups for IIO in the 3.19 cycle.
New drivers / supported parts
* rockchip - rk3066-tsadc variant
* si7020 humidity and temperature sensor
* mcp320x - add mcp3001, mcp3002, mcp3004, mcp3008, mcp3201, mcp3202
* bmp280 pressure and temperature sensor
* Qualcomm SPMI PMIC current ADC driver
* Exynos_adc - support exynos7
New features
* vf610-adc - add temperature sensor support
* Documentation of current attributes, scaled pressure, offset and
scaled humidity, RGBC intensity gain factor and scale applied to
differential voltage channels.
* Bring iio_event_monitor up to date with newer modifiers.
* Add of_xlate function to allow for complex channel mappings from the
device tree.
* Add -g parameter to generic_buffer example to allow for devices with
directly fed (no trigger) buffers.
* Move exynos driver over to syscon for PMU register access.
Cleanups, fixes for new drivers
* lis3l02dq drop an unneeded else.
* st sensors - renam st_sensors to st_sensor_settings (for clarity)
* st sensors - drop an unused parameter from all the probe utility
functions.
* vf610 better error handling and tidy up.
* si7020 - cleanups following merge
* as3935 - drop some unnecessary semicolons.
* bmp280 - fix the pressure calculation.
Hartmut Knaack [Fri, 31 Oct 2014 01:22:00 +0000 (01:22 +0000)]
iio:pressure:bmp280: fix pressure calculation
According to the datasheet and as defined in struct bmp280_comp_press, dig_p1 is
of type u16, while dig_p2 to dig_p9 are of type s16. In
bmp280_read_compensation_press(), values read from the device were treated as
the wrong type.
In bmp280_read_press() the fractional part of the measured pressure is
calculated wrong. A better way is to use *val for the raw pressure and *val2 for
the quotient and let the core do the proper conversion using IIO_VAL_FRACTIONAL.
The ADC on exynos7 is quite similar to ADCv2. The differences are as
follows:
- exynos7-adc has 8 input channels (as against 10 in ADCv2).
- exynos7 does not include an ADC PHY control register.
- Some ADC_CON2 register bits being used in ADCv2 are listed as
reserved in exynos7-adc. This results in a different init_hw
function for exynos7.
Instead of using the ADC_PHY register base address, use sysreg phandle
in ADC node to control ADC_PHY configuration register.
This patch adds syscon node for Exynos3250, Exynos4x12, Exynos5250,
and Exynos5420, Exynos5800.
Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
To: linux-samsung-soc@vger.kernel.org Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Documentation: dt-bindings: update exynos-adc.txt with syscon handle
This patch updates the DT bindings for ADC in exynos-adc.txt with the
syscon phandle to the ADC nodes.
Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
To: devicetree@vger.kernel.org Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
iio: exyno-adc: use syscon for PMU register access
This patch updates the IIO based ADC driver to use syscon and regmap
APIs to access and use PMU registers instead of remapping the PMU
registers in the driver.
Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
To: linux-iio@vger.kernel.org Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Jia He [Tue, 4 Nov 2014 01:39:58 +0000 (09:39 +0800)]
staging: rtl8188eu: Fix coding style space related ERROR problems
This fixes space related ERROR reports by checkpatch.pl
Generated by $ git ls-files "drivers/staging/rtl8188eu/*.[ch]" | \
xargs ./scripts/checkpatch.pl -f --fix-inplace --strict --types=SPACING
Already checked by text comparasion
$git diff -w
and binary comparasion of r8188eu.ko
$objdiff diff <old_commit> <new_commit>
Signed-off-by: Jia He <hejianet@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Joe Perches [Tue, 4 Nov 2014 00:25:44 +0000 (16:25 -0800)]
staging: ft1000: Logging message neatening
Use a more common logging style.
o Convert DEBUG macros to pr_debug
o Add pr_fmt
o Remove embedded function names from pr_debug
o Convert printks to pr_<level>
o Coalesce formats and align arguments
o Add missing terminating newlines
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: remove use of 'bytes_per_sample()'
This inline helper function has been replaced with comedi_bytes_per_sample().
The same commit (bf33eb4b4f57) introduced a couple other related helper
functions a manipulate the sample size.
Use the new helper functions to remove the use of 'bytes_per_sample()' and
remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: amplc_pci230: remove private data 'ai_scan_pos'
This member of the private data is replicating what the comedi_async
'cur_chan' member is used for. Use that instead and remove the private
data member.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: drivers: move comedi_async 'cur_chan' tracking into the core
The commedi_async 'cur_chan' member is used to track the current position
in the chanlist for a scan. Currently only a couple comedi drivers use
this member.
For aeshtetics, move the 'cur_chan' tracking into the core for non-SDF_PACKED
subdevices. The 'cur_chan' will be updated after reading or writing samples
to the async buffer by comedi_inc_scan_progress(). All non-SDF_PACKED subdevices
will then automatiaclly track the 'cur_chan'.
Some of the drivers use the 'cur_chan' to detect the end of scan event when
counting scans. The COMEDI_CB_EOS event is automatically added by the core
when the end of scan is detected. The drivers just need to check if the
'cur_chan' is 0 to count the number of scans completed.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 31 Oct 2014 14:32:27 +0000 (14:32 +0000)]
staging: comedi: icp_multi: correct insn_bits returned data for DO
For some unfathomable reason, the Comedi `insn_bits` handler for the
digital output subdevice (`icp_multi_insn_bits_do()`) writes the digital
output register and reads back the unrelated digital input register.
Read back the current state of the outputs (held in `s->state`) instead.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: rtd520: remove private data 'chan_is_bipolar' member
Currently this driver uses a bitmap in the private data to keep track of
the unipolar/bipolar range for each channel. This is needed to determine
if the data needs to be munged for bipolar samples.
Remove this member from the private data and use the comedi core helper
function comedi_range_is_bipolar() to determine if the data needs to be
munged.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: rtd520: fix ai_read_n() async->cur_chan use
This functions uses the async->cur_chan to determine if the current channel
is using a bipolar range and the sample needs to be munged. The cur_chan is
never incremented so all the samples are munged based on the fist channel
in the cmd->chanlist.
Bump the cur_chan after writing each sample. This fixes the code so that
the munging will be done correctly.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Thu, 30 Oct 2014 12:42:32 +0000 (12:42 +0000)]
staging: comedi: check actual data direction for COMEDI_BUFINFO ioctl
`do_bufinfo_ioctl()` handled the `COMEDI_BUFINFO` ioctl. It is supposed
to update the read or write positions in the buffer depending on the
direction of data transfer set up by the asynchronous command.
Currently it checks the `SDF_CMD_READ` and `SDF_CMD_WRITE` subdevice
flags. That's fine for most subdevices - the ones that only support one
direction, but is incorrect for those subdevices that allow the command
to be set up in either direction. Since we now set the `CMDF_WRITE`
flag according to the data transfer direction of the current command
running on the subdevice, check that flag instead.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Thu, 30 Oct 2014 12:42:31 +0000 (12:42 +0000)]
staging: comedi: check command direction in poll() file operation
`comedi_poll()` handles the poll() file operation for comedi devices.
If no asynchronous command has been set up on the current "read"
subdevice, it sets the `POLLIN` and `POLLRDNORM` bits in the return
value to indicate that the read() file operation would not block as it
would return an error. Add a check so it also does that if the
asynchronous command has been set up in the "write" direction as that
also causes the read() file operation to return an error.
Similarly, if no asynchronous command has need set up on the current
"write" subdevice, it sets the `POLLOUT` and `POLLWRNORM` bits in the
return value to indicate that the write() file operation would not block
as it would return an error. Add a check so it also does that if the
asynchronous command has been set up in the "read" direction as that
also causes the write() file operation to return an error.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Thu, 30 Oct 2014 12:42:30 +0000 (12:42 +0000)]
staging: comedi: don't allow write() on async command set up for "read"
If a Comedi asynchronous command has been set up for data transfer in
the "read" direction on the current "write" subdevice (for those
subdevices that support both directions), don't allow the "write" file
operation as that would mess with the data in the comedi data buffer
that is written by the low-level comedi hardware driver.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Thu, 30 Oct 2014 12:42:29 +0000 (12:42 +0000)]
staging: comedi: don't allow read() on async command set up for "write"
If a Comedi asynchronous command has been set up for data transfer in
the "write" direction on the current "read" subdevice (for those
subdevices that support both directions), don't allow the "read" file
operation as that would mess with the data in the comedi data buffer
that is read by the low-level comedi hardware driver.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Thu, 30 Oct 2014 12:42:28 +0000 (12:42 +0000)]
staging: comedi: ni_mio_common: don't change CMDF_WRITE flag
There is no need for `ni_ai_cmdtest()` or `ni_ao_cmdtest()` to set the
`CMDF_WRITE` flag to the correct state as it has already been done by
the core comedi module.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The low-level Comedi drivers shouldn't change the `flags` member of
`struct comedi_cmd` as the Comedi core also uses some of those flags.
They should just ignore the flags they don't understand.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Thu, 30 Oct 2014 12:42:26 +0000 (12:42 +0000)]
staging: comedi: maybe force CMDF_WRITE command flag
Most comedi subdevices that support asynchronous commands only support
data transfer in either the "read" or "write" direction, as indicated by
the `SDF_CMD_READ` and `SDF_CMD_WRITE` subdevice flags, although a few
support both directions on the same subdevice (though not
simultaneously). The `struct comedi_cmd` structure passed via ioctl
call to set up the command contains a `CMDF_WRITE` flag that can be used
to choose the direction if the subdevice supports both directions, but
the flag is optional if the subdevice only supports data transfer in one
direction.
If the subdevice only supports asynchronous data transfer in a sing
direction, set the `CMDF_WRITE` flag to the correct state so that Comedi
can make use of it later. In the case of the `COMEDI_CMDTEST` ioctl,
the updated flag will be written back to the `struct comedi_cmd` in
user-space. In the case of the `COMEDI_CMD` ioctl, the flag only gets
written back if an error is detected while testing the command, or if
the `CMDF_BOGUS` command flag is set. Since `__comedi_get_user_cmd()`
is called for both ioctls, that's a good place to set the flag.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tristan Lelong [Fri, 31 Oct 2014 23:31:31 +0000 (16:31 -0700)]
Staging: android: ion: fix typos in comments
s/comming/coming/ in drivers/staging/android/ion/ion.c
s/specfic/specific/ in drivers/staging/android/ion/ion.h
s/peformance/performance/ in drivers/staging/android/ion/ion_priv.h
Dan Carpenter [Fri, 31 Oct 2014 10:41:05 +0000 (13:41 +0300)]
staging: r8188eu: cleanups in rtw_android_set_block()
1) We can tighten up the code a little by returning directly and it
makes the code more future proof and easier to read.
2) "free" is a better name than "exit".
3) sizeof(priv_cmd) is shorter and more clear than sizeof(struct
android_wifi_priv_cmd).
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Fri, 31 Oct 2014 10:40:39 +0000 (13:40 +0300)]
staging: r8188eu: get a string from the user correctly
The original code had two bugs:
1) It didn't check if the string was zero length so it could oops when
it tried to dereference the ZERO_SIZE_PTR.
2) It didn't enforce that the string was NUL terminated.
It was also messy as pants.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Philipp Zabel [Wed, 8 Oct 2014 15:19:15 +0000 (17:19 +0200)]
imx-drm: ipuv3-plane: fix plane updates for active planes
While the DMA channel is running, it is not allowed to change anything
but the inactive (double) buffer base address, so resizing a plane or
changing to a frame buffer with different pixel format is not possible.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Philipp Zabel [Wed, 8 Oct 2014 15:19:13 +0000 (17:19 +0200)]
imx-drm: ipuv3-plane: move stride setting out of base setup
Setting the stride can only be done on inactive channels, while
the buffer base address can also be updated for running channels
using the hardware double buffering feature.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: comedi_buf: make comedi_buf_write_samples() add samples that fit
This function currently fails if the number of samples to add would
overflow the async buffer. Modify it to add the samples that fit so
at least some of the sample data is returned to the user.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Somya Anand [Fri, 31 Oct 2014 13:00:32 +0000 (18:30 +0530)]
staging: android: logger: Add a TODO
A comment about a pre-existing bug data structure definition is added.
This bug was evidently introduced by Xiong Zhou in the patch bd471258f2e09 ("staging: android: logger: use kuid_t instead of uid_t")
where the code was changed to hide a valid build warning instead of
solving the bug that was identified by it.
This patch removes the static functions bthci_CmdSetEventFilter,
bthci_CmdReadRSSI and bthci_CmdHostNumberOfCompletedPackets, since their
body only consists of 'return HCI_STATUS_SUCCESS'.
Signed-off-by: Roberta Dobrescu <roberta.dobrescu@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ksock_net_t uses a __u64 quantity as an 'incarnation' timestamp. This is also
passed on in hello messages and used to detect if a reboot has occurred.
This 'incarnation' is obtained using do_gettimeofday.It is only used in equality
checks, so the absolute value does not matter.
This patch replaces do_gettimeofday with ktime_get_ns for the following reasons:
1. ktime_get_ns returns a __u64 which is safer than 'struct timeval'
which will overflow on 32-bit systems in year 2038 and beyond.
2. Reduced compute: ktime_get_ns is faster than the multiply/add
combination used in this function
Signed-off-by: Tina Ruchandani <ruchandani.tina@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ken Depro [Mon, 3 Nov 2014 19:56:32 +0000 (14:56 -0500)]
staging: unisys: Remove unneeded spaces from channel.c
This patch removes some unneeded white space after casts within the
channel.c file. The checkpatch script was run after these changes,
and no further checks or warnings were seen.
Signed-off-by: Ken Depro <kenneth.depro@unisys.com> Signed-off-by: Ben Romer <benjamin.romer@unisys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Get rid of the typedef and just use struct visorchipset_busdev_responders
instead. Fix CamelCase parameter names in the function pointer definitions for
the structure:
busNo => bus_no
devNo => dev_no
Update references to changed names.
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / linux-beck.git / log