Arnd Bergmann [Wed, 12 Oct 2016 14:54:01 +0000 (16:54 +0200)]
xen-netback: fix type mismatch warning
Wiht the latest rework of the xen-netback driver, we get a warning
on ARM about the types passed into min():
drivers/net/xen-netback/rx.c: In function 'xenvif_rx_next_chunk':
include/linux/kernel.h:739:16: error: comparison of distinct pointer types lacks a cast [-Werror]
The reason is that XEN_PAGE_SIZE is not size_t here. There
is no actual bug, and we can easily avoid the warning using the
min_t() macro instead of min().
Fixes: eb1723a29b9a ("xen-netback: refactor guest rx") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Paul Durrant <paul.durrant@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes a problem when propagated the
failure of ptp_clock_register to open function.
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre TORGUE <alexandre.torgue@st.com> Cc: Rayagond Kokatanur <rayagond@vayavyalabs.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The gmac 4.x version has not extended descriptors
(that are available on 3.x instead of).
While initializing the PTP module, the advanced PTP was
enabled in case of extended descriptors. This cannot be
applied for 4.x version where only the hardware capability
register has to show if the feature is present.
Patch also adds some extra netdev_(debug/inof) to better
dump the configuration.
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre TORGUE <alexandre.torgue@st.com> Cc: Rayagond Kokatanur <rayagond@vayavyalabs.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Arnd Bergmann [Mon, 10 Oct 2016 11:59:16 +0000 (13:59 +0200)]
qed: fix old-style function definition
The definition of qed_get_rdma_ops() is not a prototype unless
we add 'void' here, as indicated by this W=1 warning:
drivers/net/ethernet/qlogic/qed/qed_roce.c: In function ‘qed_get_rdma_ops’:
drivers/net/ethernet/qlogic/qed/qed_roce.c:2950:28: error: old-style function definition [-Werror=old-style-definition]
Fixes: abd49676c707 ("qed: Add RoCE ll2 & GSI support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Yuval Mintz <Yuval.Mintz@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The software calculation of UDP checksum in Netvsc driver was
only handling IPv4 case. By using skb_checksum_help() instead
all protocols can be handled. Rearrange code to eliminate goto
and look like other drivers.
This is a temporary solution; recent versions of Window Server etc
do support UDP checksum offload, just need to do the appropriate negotiation
with host to validate before using. This will be done in later patch.
Please queue this for -stable as well.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
WANG Cong [Tue, 11 Oct 2016 17:56:45 +0000 (10:56 -0700)]
net_sched: reorder pernet ops and act ops registrations
Krister reported a kernel NULL pointer dereference after
tcf_action_init_1() invokes a_o->init(), it is a race condition
where one thread calling tcf_register_action() to initialize
the netns data after putting act ops in the global list and
the other thread searching the list and then calling
a_o->init(net, ...).
Fix this by moving the pernet ops registration before making
the action ops visible. This is fine because: a) we don't
rely on act_base in pernet ops->init(), b) in the worst case we
have a fully initialized netns but ops is still not ready so
new actions still can't be created.
Reported-by: Krister Johansen <kjlx@templeofstupid.com> Tested-by: Krister Johansen <kjlx@templeofstupid.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
If a VIF has been ready for rx_stall_timeout (60s by default) and an
Rx ring is drained of all requests an Rx stall will be incorrectly
detected. When this occurs and the guest Rx queue is empty, the Rx
ring's event index will not be set and the frontend will not raise an
event when new requests are placed on the ring, permanently stalling
the VIF.
This is a regression introduced by eb1723a29b9a7 (xen-netback:
refactor guest rx).
Fix this by reinstating the setting of queue->last_rx_time when
placing a packet onto the guest Rx ring.
Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Paul Durrant <paul.durrant@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vlad Tsyrklevich [Tue, 11 Oct 2016 13:02:47 +0000 (15:02 +0200)]
drivers/ptp: Fix kernel memory disclosure
The reserved field precise_offset->rsv is not cleared before being
copied to user space, leaking kernel stack memory. Clear the struct
before it's copied.
Signed-off-by: Vlad Tsyrklevich <vlad@tsyrklevich.net> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Tom Herbert [Wed, 12 Oct 2016 01:57:10 +0000 (04:57 +0300)]
net/mlx5: Add MLX5_ARRAY_SET64 to fix BUILD_BUG_ON
I am hitting this in mlx5:
drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c: In function
reclaim_pages_cmd.clone.0:
drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c:346: error: call
to __compiletime_assert_346 declared with attribute error:
BUILD_BUG_ON failed: __mlx5_bit_off(manage_pages_out, pas[i]) % 64
drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c: In function give_pages:
drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c:291: error: call
to __compiletime_assert_291 declared with attribute error:
BUILD_BUG_ON failed: __mlx5_bit_off(manage_pages_in, pas[i]) % 64
Problem is that this is doing a BUILD_BUG_ON on a non-constant
expression because of trying to take offset of pas[i] in the
structure.
Fix is to create MLX5_ARRAY_SET64 that takes an additional argument
that is the field index to separate between BUILD_BUG_ON on the array
constant field and the indexed field to assign the value to.
There are two callers of MLX5_SET64 that are trying to get a variable
offset, change those to call MLX5_ARRAY_SET64 passing 'pas' and 'i'
as the arguments to use in the offset check and the indexed value
assignment.
Fixes: a533ed5e179cd ("net/mlx5: Pages management commands via mlx5 ifc") Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Bjørn Mork [Mon, 10 Oct 2016 19:12:49 +0000 (21:12 +0200)]
qmi_wwan: add support for Quectel EC21 and EC25
The Quectel EC21 and EC25 need the same "set DTR" request as devices
based on the MDM9230 chipset, but has no USB3 support. Our best guess
is that the "set DTR" functionality depends on chipset and/or
baseband firmware generation. But USB3 is still an optional feature.
Since we cannot enable this unconditionally for all older devices, and
there doesn't appear to be anything we can use in the USB descriptors
to identify these chips, we are forced to use a device specific quirk
flag.
Reported-and-tested-by: Sebastian Sjoholm <sebastian.sjoholm@gmail.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Benc [Mon, 10 Oct 2016 15:02:44 +0000 (17:02 +0200)]
openvswitch: add NETIF_F_HW_VLAN_STAG_TX to internal dev
The internal device does support 802.1AD offloading since 018c1dda5ff1
("openvswitch: 802.1AD Flow handling, actions, vlan parsing, netlink
attributes").
Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Acked-by: Eric Garver <e@erig.me> Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Yongjun [Mon, 10 Oct 2016 14:08:28 +0000 (14:08 +0000)]
qed: Fix to use list_for_each_entry_safe() when delete items
Since we will remove items off the list using list_del() we need
to use a safe version of the list_for_each_entry() macro aptly named
list_for_each_entry_safe().
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Yuval Mintz <Yuval.Mintz@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Arnd Bergmann [Mon, 10 Oct 2016 12:41:10 +0000 (14:41 +0200)]
tlan: avoid unused label with PCI=n
While build testing with randconfig on x86, I ran into this warning
that appears to have been around forever
drivers/net/ethernet/ti/tlan.c: In function ‘tlan_probe1’:
drivers/net/ethernet/ti/tlan.c:614:1: error: label ‘err_out’ defined but not used [-Werror=unused-label]
This can be trivially avoided by just moving the label into the
existing #ifdef.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
Paul Durrant [Mon, 10 Oct 2016 08:30:53 +0000 (09:30 +0100)]
xen-netback: (re-)create a debugfs node for hash information
It is useful to be able to see the hash configuration when running tests.
This patch adds a debugfs node for that purpose.
The original version of this patch (commit c0c64c152389) was reverted due
to build failures caused by a conflict with commit 0364a8824c02
("xen-netback: switch to threaded irq for control ring"). This new version
of the patch is nearly identical to the original, the only difference
being that creation of the debugfs node is predicated on 'ctrl_irq' being
non-zero rather then the now non-existent 'ctrl_task'.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Cc: Wei Liu <wei.liu2@citrix.com> Cc: David S. Miller <davem@davemloft.net> Acked-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Mon, 10 Oct 2016 03:25:55 +0000 (20:25 -0700)]
net_sched: do not broadcast RTM_GETTFILTER result
There are two ways to get tc filters from kernel to user space.
1) Full dump (tc_dump_tfilter())
2) RTM_GETTFILTER to get one precise filter, reducing overhead.
The second operation is unfortunately broadcasting its result,
polluting "tc monitor" users.
This patch makes sure only the requester gets the result, using
netlink_unicast() instead of rtnetlink_send()
Jamal cooked an iproute2 patch to implement "tc filter get" operation,
but other user space libraries already use RTM_GETTFILTER when a single
filter is queried, instead of dumping all filters.
Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
strparser: Propagate correct error code in strp_recv()
With m68k-linux-gnu-gcc-4.1:
net/strparser/strparser.c: In function ‘strp_recv’:
net/strparser/strparser.c:98: warning: ‘err’ may be used uninitialized in this function
Pass "len" (which is an error code when negative) instead of the
uninitialized "err" variable to fix this.
Fixes: 43a0c6751a322847 ("strparser: Stream parser for messages") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Wed, 12 Oct 2016 01:12:22 +0000 (18:12 -0700)]
Merge tag 'drm-for-v4.9' of git://people.freedesktop.org/~airlied/linux
Pull drm updates from Dave Airlie:
"Core:
- Fence destaging work
- DRIVER_LEGACY to split off legacy drm drivers
- drm_mm refactoring
- Splitting drm_crtc.c into chunks and documenting better
- Display info fixes
- rbtree support for prime buffer lookup
- Simple VGA DAC driver
amdgpu:
- Powerplay for Iceland asics
- Improved GPU reset support
- UVD/VEC powergating support for CZ/ST
- Preinitialised VRAM buffer support
- Virtual display support
- Initial SI support
- GTT rework
- PCI shutdown callback support
- HPD IRQ storm fixes
amdkfd:
- bugfixes
tilcdc:
- Atomic modesetting support
mediatek:
- AAL + GAMMA engine support
- Hook up gamma LUT
- Temporal dithering support
imx:
- Pixel clock from devicetree
- drm bridge support for LVDS bridges
- active plane reconfiguration
- VDIC deinterlacer support
- Frame synchronisation unit support
- Color space conversion support
analogix:
- PSR support
- Better panel on/off support
rockchip:
- rk3399 vop/crtc support
- PSR support
vc4:
- Interlaced vblank timing
- 3D rendering CPU overhead reduction
- HDMI output fixes
tda998x:
- HDMI audio ASoC support
sunxi:
- Allwinner A33 support
- better TCON support
msm:
- DT binding cleanups
- Explicit fence-fd support
sti:
- remove sti415/416 support
etnaviv:
- MMUv2 refactoring
- GC3000 support
exynos:
- Refactoring HDMI DCC/PHY
- G2D pm regression fix
- Page fault issues with wait for vblank
There is no nouveau work in this tree, as Ben didn't get a pull
request in, and he was fighting moving to atomic and adding mst
support, so maybe best it waits for a cycle"
* tag 'drm-for-v4.9' of git://people.freedesktop.org/~airlied/linux: (1412 commits)
drm/crtc: constify drm_crtc_index parameter
drm/i915: Fix conflict resolution from backmerge of v4.8-rc8 to drm-next
drm/i915/guc: Unwind GuC workqueue reservation if request construction fails
drm/i915: Reset the breadcrumbs IRQ more carefully
drm/i915: Force relocations via cpu if we run out of idle aperture
drm/i915: Distinguish last emitted request from last submitted request
drm/i915: Allow DP to work w/o EDID
drm/i915: Move long hpd handling into the hotplug work
drm/i915/execlists: Reinitialise context image after GPU hang
drm/i915: Use correct index for backtracking HUNG semaphores
drm/i915: Unalias obj->phys_handle and obj->userptr
drm/i915: Just clear the mmiodebug before a register access
drm/i915/gen9: only add the planes actually affected by ddb changes
drm/i915: Allow PCH DPLL sharing regardless of DPLL_SDVO_HIGH_SPEED
drm/i915/bxt: Fix HDMI DPLL configuration
drm/i915/gen9: fix the watermark res_blocks value
drm/i915/gen9: fix plane_blocks_per_line on watermarks calculations
drm/i915/gen9: minimum scanlines for Y tile is not always 4
drm/i915/gen9: fix the WaWmMemoryReadLatency implementation
drm/i915/kbl: KBL also needs to run the SAGV code
...
Linus Torvalds [Wed, 12 Oct 2016 00:34:10 +0000 (17:34 -0700)]
Merge branch 'akpm' (patches from Andrew)
Merge more updates from Andrew Morton:
- a few block updates that fell in my lap
- lib/ updates
- checkpatch
- autofs
- ipc
- a ton of misc other things
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (100 commits)
mm: split gfp_mask and mapping flags into separate fields
fs: use mapping_set_error instead of opencoded set_bit
treewide: remove redundant #include <linux/kconfig.h>
hung_task: allow hung_task_panic when hung_task_warnings is 0
kthread: add kerneldoc for kthread_create()
kthread: better support freezable kthread workers
kthread: allow to modify delayed kthread work
kthread: allow to cancel kthread work
kthread: initial support for delayed kthread work
kthread: detect when a kthread work is used by more workers
kthread: add kthread_destroy_worker()
kthread: add kthread_create_worker*()
kthread: allow to call __kthread_create_on_node() with va_list args
kthread/smpboot: do not park in kthread_create_on_cpu()
kthread: kthread worker API cleanup
kthread: rename probe_kthread_data() to kthread_probe_data()
scripts/tags.sh: enable code completion in VIM
mm: kmemleak: avoid using __va() on addresses that don't have a lowmem mapping
kdump, vmcoreinfo: report memory sections virtual addresses
ipc/sem.c: add cond_resched in exit_sme
...
Michal Hocko [Tue, 11 Oct 2016 20:56:04 +0000 (13:56 -0700)]
mm: split gfp_mask and mapping flags into separate fields
mapping->flags currently encodes two different things into a single flag.
It contains sticky gfp_mask for page cache allocations and AS_ codes used
to report errors/enospace and other states which are mapping specific.
Condensing the two semantically unrelated things saves few bytes but it
also complicates other things. For one thing the gfp flags space is
reduced and in fact we are already running out of available bits. It can
be assumed that more gfp flags will be necessary later on.
To not introduce the address_space grow (at least on x86_64) we can stick
it right after private_lock because we have a hole there.
Michal Hocko [Tue, 11 Oct 2016 20:56:01 +0000 (13:56 -0700)]
fs: use mapping_set_error instead of opencoded set_bit
The mapping_set_error() helper sets the correct AS_ flag for the mapping
so there is no reason to open code it. Use the helper directly.
[akpm@linux-foundation.org: be honest about conversion from -ENXIO to -EIO] Link: http://lkml.kernel.org/r/20160912111608.2588-2-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
John Siddle [Tue, 11 Oct 2016 20:55:56 +0000 (13:55 -0700)]
hung_task: allow hung_task_panic when hung_task_warnings is 0
Previously hung_task_panic would not be respected if enabled after
hung_task_warnings had already been decremented to 0.
Permit the kernel to panic if hung_task_panic is enabled after
hung_task_warnings has already been decremented to 0 and another task
hangs for hung_task_timeout_secs seconds.
Check if hung_task_panic is enabled so we don't return prematurely, and
check if hung_task_warnings is non-zero so we don't print the warning
unnecessarily.
Petr Mladek [Tue, 11 Oct 2016 20:55:50 +0000 (13:55 -0700)]
kthread: better support freezable kthread workers
This patch allows to make kthread worker freezable via a new @flags
parameter. It will allow to avoid an init work in some kthreads.
It currently does not affect the function of kthread_worker_fn()
but it might help to do some optimization or fixes eventually.
I currently do not know about any other use for the @flags
parameter but I believe that we will want more flags
in the future.
Finally, I hope that it will not cause confusion with @flags member
in struct kthread. Well, I guess that we will want to rework the
basic kthreads implementation once all kthreads are converted into
kthread workers or workqueues. It is possible that we will merge
the two structures.
Link: http://lkml.kernel.org/r/1470754545-17632-12-git-send-email-pmladek@suse.com Signed-off-by: Petr Mladek <pmladek@suse.com> Acked-by: Tejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Borislav Petkov <bp@suse.de> Cc: Michal Hocko <mhocko@suse.cz> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Petr Mladek [Tue, 11 Oct 2016 20:55:46 +0000 (13:55 -0700)]
kthread: allow to modify delayed kthread work
There are situations when we need to modify the delay of a delayed kthread
work. For example, when the work depends on an event and the initial delay
means a timeout. Then we want to queue the work immediately when the event
happens.
This patch implements kthread_mod_delayed_work() as inspired workqueues.
It cancels the timer, removes the work from any worker list and queues it
again with the given timeout.
A very special case is when the work is being canceled at the same time.
It might happen because of the regular kthread_cancel_delayed_work_sync()
or by another kthread_mod_delayed_work(). In this case, we do nothing and
let the other operation win. This should not normally happen as the caller
is supposed to synchronize these operations a reasonable way.
Link: http://lkml.kernel.org/r/1470754545-17632-11-git-send-email-pmladek@suse.com Signed-off-by: Petr Mladek <pmladek@suse.com> Acked-by: Tejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Borislav Petkov <bp@suse.de> Cc: Michal Hocko <mhocko@suse.cz> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Petr Mladek [Tue, 11 Oct 2016 20:55:43 +0000 (13:55 -0700)]
kthread: allow to cancel kthread work
We are going to use kthread workers more widely and sometimes we will need
to make sure that the work is neither pending nor running.
This patch implements cancel_*_sync() operations as inspired by
workqueues. Well, we are synchronized against the other operations via
the worker lock, we use del_timer_sync() and a counter to count parallel
cancel operations. Therefore the implementation might be easier.
First, we check if a worker is assigned. If not, the work has newer been
queued after it was initialized.
Second, we take the worker lock. It must be the right one. The work must
not be assigned to another worker unless it is initialized in between.
Third, we try to cancel the timer when it exists. The timer is deleted
synchronously to make sure that the timer call back is not running. We
need to temporary release the worker->lock to avoid a possible deadlock
with the callback. In the meantime, we set work->canceling counter to
avoid any queuing.
Fourth, we try to remove the work from a worker list. It might be
the list of either normal or delayed works.
Fifth, if the work is running, we call kthread_flush_work(). It might
take an arbitrary time. We need to release the worker-lock again. In the
meantime, we again block any queuing by the canceling counter.
As already mentioned, the check for a pending kthread work is done under a
lock. In compare with workqueues, we do not need to fight for a single
PENDING bit to block other operations. Therefore we do not suffer from
the thundering storm problem and all parallel canceling jobs might use
kthread_flush_work(). Any queuing is blocked until the counter gets zero.
Link: http://lkml.kernel.org/r/1470754545-17632-10-git-send-email-pmladek@suse.com Signed-off-by: Petr Mladek <pmladek@suse.com> Acked-by: Tejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Borislav Petkov <bp@suse.de> Cc: Michal Hocko <mhocko@suse.cz> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Petr Mladek [Tue, 11 Oct 2016 20:55:40 +0000 (13:55 -0700)]
kthread: initial support for delayed kthread work
We are going to use kthread_worker more widely and delayed works
will be pretty useful.
The implementation is inspired by workqueues. It uses a timer to queue
the work after the requested delay. If the delay is zero, the work is
queued immediately.
In compare with workqueues, each work is associated with a single worker
(kthread). Therefore the implementation could be much easier. In
particular, we use the worker->lock to synchronize all the operations with
the work. We do not need any atomic operation with a flags variable.
In fact, we do not need any state variable at all. Instead, we add a list
of delayed works into the worker. Then the pending work is listed either
in the list of queued or delayed works. And the existing check of pending
works is the same even for the delayed ones.
A work must not be assigned to another worker unless reinitialized.
Therefore the timer handler might expect that dwork->work->worker is valid
and it could simply take the lock. We just add some sanity checks to help
with debugging a potential misuse.
Link: http://lkml.kernel.org/r/1470754545-17632-9-git-send-email-pmladek@suse.com Signed-off-by: Petr Mladek <pmladek@suse.com> Acked-by: Tejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Borislav Petkov <bp@suse.de> Cc: Michal Hocko <mhocko@suse.cz> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Petr Mladek [Tue, 11 Oct 2016 20:55:36 +0000 (13:55 -0700)]
kthread: detect when a kthread work is used by more workers
Nothing currently prevents a work from queuing for a kthread worker when
it is already running on another one. This means that the work might run
in parallel on more than one worker. Also some operations are not
reliable, e.g. flush.
This problem will be even more visible after we add kthread_cancel_work()
function. It will only have "work" as the parameter and will use
worker->lock to synchronize with others.
Well, normally this is not a problem because the API users are sane.
But bugs might happen and users also might be crazy.
This patch adds a warning when we try to insert the work for another
worker. It does not fully prevent the misuse because it would make the
code much more complicated without a big benefit.
It adds the same warning also into kthread_flush_work() instead of the
repeated attempts to get the right lock.
A side effect is that one needs to explicitly reinitialize the work if it
must be queued into another worker. This is needed, for example, when the
worker is stopped and started again. It is a bit inconvenient. But it
looks like a good compromise between the stability and complexity.
I have double checked all existing users of the kthread worker API and
they all seems to initialize the work after the worker gets started.
Just for completeness, the patch adds a check that the work is not already
in a queue.
The patch also puts all the checks into a separate function. It will be
reused when implementing delayed works.
Link: http://lkml.kernel.org/r/1470754545-17632-8-git-send-email-pmladek@suse.com Signed-off-by: Petr Mladek <pmladek@suse.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Borislav Petkov <bp@suse.de> Cc: Michal Hocko <mhocko@suse.cz> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Petr Mladek [Tue, 11 Oct 2016 20:55:30 +0000 (13:55 -0700)]
kthread: add kthread_create_worker*()
Kthread workers are currently created using the classic kthread API,
namely kthread_run(). kthread_worker_fn() is passed as the @threadfn
parameter.
This patch defines kthread_create_worker() and
kthread_create_worker_on_cpu() functions that hide implementation details.
They enforce using kthread_worker_fn() for the main thread. But I doubt
that there are any plans to create any alternative. In fact, I think that
we do not want any alternative main thread because it would be hard to
support consistency with the rest of the kthread worker API.
The naming and function of kthread_create_worker() is inspired by the
workqueues API like the rest of the kthread worker API.
The kthread_create_worker_on_cpu() variant is motivated by the original
kthread_create_on_cpu(). Note that we need to bind per-CPU kthread
workers already when they are created. It makes the life easier.
kthread_bind() could not be used later for an already running worker.
This patch does _not_ convert existing kthread workers. The kthread
worker API need more improvements first, e.g. a function to destroy the
worker.
IMPORTANT:
kthread_create_worker_on_cpu() allows to use any format of the worker
name, in compare with kthread_create_on_cpu(). The good thing is that it
is more generic. The bad thing is that most users will need to pass the
cpu number in two parameters, e.g. kthread_create_worker_on_cpu(cpu,
"helper/%d", cpu).
To be honest, the main motivation was to avoid the need for an empty
va_list. The only legal way was to create a helper function that would be
called with an empty list. Other attempts caused compilation warnings or
even errors on different architectures.
There were also other alternatives, for example, using #define or
splitting __kthread_create_worker(). The used solution looked like the
least ugly.
Link: http://lkml.kernel.org/r/1470754545-17632-6-git-send-email-pmladek@suse.com Signed-off-by: Petr Mladek <pmladek@suse.com> Acked-by: Tejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Borislav Petkov <bp@suse.de> Cc: Michal Hocko <mhocko@suse.cz> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Petr Mladek [Tue, 11 Oct 2016 20:55:23 +0000 (13:55 -0700)]
kthread/smpboot: do not park in kthread_create_on_cpu()
kthread_create_on_cpu() was added by the commit 2a1d446019f9a5983e
("kthread: Implement park/unpark facility"). It is currently used only
when enabling new CPU. For this purpose, the newly created kthread has to
be parked.
The CPU binding is a bit tricky. The kthread is parked when the CPU has
not been allowed yet. And the CPU is bound when the kthread is unparked.
The function would be useful for more per-CPU kthreads, e.g.
bnx2fc_thread, fcoethread. For this purpose, the newly created kthread
should stay in the uninterruptible state.
This patch moves the parking into smpboot. It binds the thread already
when created. Then the function might be used universally. Also the
behavior is consistent with kthread_create() and kthread_create_on_node().
Link: http://lkml.kernel.org/r/1470754545-17632-4-git-send-email-pmladek@suse.com Signed-off-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Borislav Petkov <bp@suse.de> Cc: Michal Hocko <mhocko@suse.cz> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Petr Mladek [Tue, 11 Oct 2016 20:55:20 +0000 (13:55 -0700)]
kthread: kthread worker API cleanup
A good practice is to prefix the names of functions by the name
of the subsystem.
The kthread worker API is a mix of classic kthreads and workqueues. Each
worker has a dedicated kthread. It runs a generic function that process
queued works. It is implemented as part of the kthread subsystem.
This patch renames the existing kthread worker API to use
the corresponding name from the workqueues API prefixed by
kthread_:
Note that the names of DEFINE_KTHREAD_WORK*() macros stay
as they are. It is common that the "DEFINE_" prefix has
precedence over the subsystem names.
Note that INIT() macros and init() functions use different
naming scheme. There is no good solution. There are several
reasons for this solution:
+ "init" in the function names stands for the verb "initialize"
aka "initialize worker". While "INIT" in the macro names
stands for the noun "INITIALIZER" aka "worker initializer".
+ INIT() macros are used only in DEFINE() macros
+ init() functions are used close to the other kthread()
functions. It looks much better if all the functions
use the same scheme.
+ There will be also kthread_destroy_worker() that will
be used close to kthread_cancel_work(). It is related
to the init() function. Again it looks better if all
functions use the same naming scheme.
+ there are several precedents for such init() function
names, e.g. amd_iommu_init_device(), free_area_init_node(),
jump_label_init_type(), regmap_init_mmio_clk(),
+ It is not an argument but it was inconsistent even before.
[arnd@arndb.de: fix linux-next merge conflict] Link: http://lkml.kernel.org/r/20160908135724.1311726-1-arnd@arndb.de Link: http://lkml.kernel.org/r/1470754545-17632-3-git-send-email-pmladek@suse.com Suggested-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Petr Mladek <pmladek@suse.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Borislav Petkov <bp@suse.de> Cc: Michal Hocko <mhocko@suse.cz> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Petr Mladek [Tue, 11 Oct 2016 20:55:17 +0000 (13:55 -0700)]
kthread: rename probe_kthread_data() to kthread_probe_data()
Patch series "kthread: Kthread worker API improvements"
The intention of this patchset is to make it easier to manipulate and
maintain kthreads. Especially, I want to replace all the custom main
cycles with a generic one. Also I want to make the kthreads sleep in a
consistent state in a common place when there is no work.
This patch (of 11):
A good practice is to prefix the names of functions by the name of the
subsystem.
This patch fixes the name of probe_kthread_data(). The other wrong
functions names are part of the kthread worker API and will be fixed
separately.
Link: http://lkml.kernel.org/r/1470754545-17632-2-git-send-email-pmladek@suse.com Signed-off-by: Petr Mladek <pmladek@suse.com> Suggested-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Tejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Borislav Petkov <bp@suse.de> Cc: Michal Hocko <mhocko@suse.cz> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mathieu Maret [Tue, 11 Oct 2016 20:55:14 +0000 (13:55 -0700)]
scripts/tags.sh: enable code completion in VIM
Vim, with the omnicppcomplete(#1) plugin, can do code completion using
information build by ctags. Add flags needed by omnicppcomplete(#2) to
have completion on member of structure.
Link: http://lkml.kernel.org/r/20160830191546.4469-1-mathieu.maret@gmail.com Signed-off-by: Mathieu Maret <mathieu.maret@gmail.com> Cc: Michal Marek <mmarek@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Catalin Marinas [Tue, 11 Oct 2016 20:55:11 +0000 (13:55 -0700)]
mm: kmemleak: avoid using __va() on addresses that don't have a lowmem mapping
Some of the kmemleak_*() callbacks in memblock, bootmem, CMA convert a
physical address to a virtual one using __va(). However, such physical
addresses may sometimes be located in highmem and using __va() is
incorrect, leading to inconsistent object tracking in kmemleak.
The following functions have been added to the kmemleak API and they take
a physical address as the object pointer. They only perform the
corresponding action if the address has a lowmem mapping:
KASLR memory randomization can randomize the base of the physical memory
mapping (PAGE_OFFSET), vmalloc (VMALLOC_START) and vmemmap
(VMEMMAP_START). Adding these variables on VMCOREINFO so tools can easily
identify the base of each memory section.
Link: http://lkml.kernel.org/r/1471531632-23003-1-git-send-email-thgarnie@google.com Signed-off-by: Thomas Garnier <thgarnie@google.com> Acked-by: Baoquan He <bhe@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H . Peter Anvin" <hpa@zytor.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Xunlei Pang <xlpang@redhat.com> Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Cc: Kees Cook <keescook@chromium.org> Cc: Eugene Surovegin <surovegin@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nikolay Borisov [Tue, 11 Oct 2016 20:55:05 +0000 (13:55 -0700)]
ipc/sem.c: add cond_resched in exit_sme
In CONFIG_PREEMPT=n kernel a softlockup was observed while the for loop in
exit_sem. Apparently it's possible for the loop to take quite a long time
and it doesn't have a scheduling point in it. Since the codes is
executing under an rcu read section this may also cause rcu stalls, which
in turn block synchronize_rcu operations, which more or less de-stabilises
the whole system.
Fix this by introducing a cond_resched() at the beginning of the loop.
Davidlohr Bueso [Tue, 11 Oct 2016 20:55:02 +0000 (13:55 -0700)]
ipc/msg: avoid waking sender upon full queue
Blocked tasks queued in q_senders waiting for their message to fit in the
queue are blindly awoken every time we think there's a remote chance this
might happen. This could cause numerous (and expensive -- thundering
herd-ish) bogus wakeups if the queue is still really full. Adding to the
scheduling cost/overhead, there's also the fact that we need to take the
ipc object lock and requeue ourselves in the q_senders list.
By keeping track of the blocked sender's message size, we can know
previously if the wakeup ought to occur or not. Otherwise, to maintain
the current wakeup order we just move it to the tail. This is exactly
what occurs right now if the sender needs to go back to sleep.
The case of EIDRM is left completely untouched, as we need to wakeup all
the tasks, and shouldn't be playing games in the first place.
This patch was seen to save on the 'msgctl10' ltp testcase ~15% in context
switches (avg out of ten runs). Although these tests are really about
functionality (as opposed to performance), is does show the direct
benefits of the optimization.
[akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/1469748819-19484-6-git-send-email-dave@stgolabs.net Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Davidlohr Bueso [Tue, 11 Oct 2016 20:54:56 +0000 (13:54 -0700)]
ipc/msg: batch queue sender wakeups
Currently the use of wake_qs in sysv msg queues are only for the receiver
tasks that are blocked on the queue. But blocked sender tasks (due to
queue size constraints) still are awoken with the ipc object lock held,
which can be a problem particularly for small sized queues and far from
gracious for -rt (just like it was for the receiver side).
The paths that actually wakeup a sender are obviously related to when we
are either getting rid of the queue or after (some) space is freed-up
after a receiver takes the msg (msgrcv). Furthermore, with the exception
of msgrcv, we can always piggy-back on expunge_all that has its own tasks
lined-up for waking. Finally, upon unlinking the message, it should be no
problem delaying the wakeups a bit until after we've released the lock.
Link: http://lkml.kernel.org/r/1469748819-19484-3-git-send-email-dave@stgolabs.net Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch moves the wakeup_process() invocation so it is not done under
the ipc global lock by making use of a lockless wake_q. With this change,
the waiter is woken up once the message has been assigned and it does not
need to loop on SMP if the message points to NULL. In the signal case we
still need to check the pointer under the lock to verify the state.
This change should also avoid the introduction of preempt_disable() in -RT
which avoids a busy-loop which pools for the NULL -> !NULL change if the
waiter has a higher priority compared to the waker.
By making use of wake_qs, the logic of sysv msg queues is greatly
simplified (and very well suited as we can batch lockless wakeups),
particularly around the lockless receive algorithm.
This has been tested with Manred's pmsg-shared tool on a "AMD A10-7800
Radeon R7, 12 Compute Cores 4C+8G":
Manfred Spraul [Tue, 11 Oct 2016 20:54:50 +0000 (13:54 -0700)]
ipc/sem.c: fix complex_count vs. simple op race
Commit 6d07b68ce16a ("ipc/sem.c: optimize sem_lock()") introduced a
race:
sem_lock has a fast path that allows parallel simple operations.
There are two reasons why a simple operation cannot run in parallel:
- a non-simple operations is ongoing (sma->sem_perm.lock held)
- a complex operation is sleeping (sma->complex_count != 0)
As both facts are stored independently, a thread can bypass the current
checks by sleeping in the right positions. See below for more details
(or kernel bugzilla 105651).
The patch fixes that by creating one variable (complex_mode)
that tracks both reasons why parallel operations are not possible.
The patch also updates stale documentation regarding the locking.
With regards to stable kernels:
The patch is required for all kernels that include the
commit 6d07b68ce16a ("ipc/sem.c: optimize sem_lock()") (3.10?)
The alternative is to revert the patch that introduced the race.
The patch is safe for backporting, i.e. it makes no assumptions
about memory barriers in spin_unlock_wait().
Background:
Here is the race of the current implementation:
Thread A: (simple op)
- does the first "sma->complex_count == 0" test
Thread B: (complex op)
- does sem_lock(): This includes an array scan. But the scan can't
find Thread A, because Thread A does not own sem->lock yet.
- the thread does the operation, increases complex_count,
drops sem_lock, sleeps
Thread A:
- spin_lock(&sem->lock), spin_is_locked(sma->sem_perm.lock)
- sleeps before the complex_count test
Thread C: (complex op)
- does sem_lock (no array scan, complex_count==1)
- wakes up Thread B.
- decrements complex_count
Thread A:
- does the complex_count test
Bug:
Now both thread A and thread C operate on the same array, without
any synchronization.
There's no point in collecting coverage from lib/stackdepot.c, as it is
not a function of syscall inputs. Disabling kcov instrumentation for that
file will reduce the coverage noise level.
Rob Herring [Tue, 11 Oct 2016 20:54:38 +0000 (13:54 -0700)]
config: android: move device mapper options to recommended
CONFIG_MD is in recommended, but other dependent options like DM_CRYPT and
DM_VERITY options are in base. The result is the options in base don't
get enabled when applying both base and recommended fragments. Move all
the options to recommended.
Link: http://lkml.kernel.org/r/20160908185934.18098-1-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: John Stultz <john.stultz@linaro.org> Cc: Amit Pundir <amit.pundir@linaro.org> Cc: Dmitry Shmidt <dimitrysh@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Peter Zijlstra [Tue, 11 Oct 2016 20:54:33 +0000 (13:54 -0700)]
relay: Use irq_work instead of plain timer for deferred wakeup
Relay avoids calling wake_up_interruptible() for doing the wakeup of
readers/consumers, waiting for the generation of new data, from the
context of a process which produced the data. This is apparently done to
prevent the possibility of a deadlock in case Scheduler itself is is
generating data for the relay, after acquiring rq->lock.
The following patch used a timer (to be scheduled at next jiffy), for
delegating the wakeup to another context.
commit 7c9cb38302e78d24e37f7d8a2ea7eed4ae5f2fa7
Author: Tom Zanussi <zanussi@comcast.net>
Date: Wed May 9 02:34:01 2007 -0700
relay: use plain timer instead of delayed work
relay doesn't need to use schedule_delayed_work() for waking readers
when a simple timer will do.
Scheduling a plain timer, at next jiffies boundary, to do the wakeup
causes a significant wakeup latency for the Userspace client, which makes
relay less suitable for the high-frequency low-payload use cases where the
data gets generated at a very high rate, like multiple sub buffers getting
filled within a milli second. Moreover the timer is re-scheduled on every
newly produced sub buffer so the timer keeps getting pushed out if sub
buffers are filled in a very quick succession (less than a jiffy gap
between filling of 2 sub buffers). As a result relay runs out of sub
buffers to store the new data.
By using irq_work it is ensured that wakeup of userspace client, blocked
in the poll call, is done at earliest (through self IPI or next timer
tick) enabling it to always consume the data in time. Also this makes
relay consistent with printk & ring buffers (trace), as they too use
irq_work for deferred wake up of readers.
[arnd@arndb.de: select CONFIG_IRQ_WORK] Link: http://lkml.kernel.org/r/20160912154035.3222156-1-arnd@arndb.de
[akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/1472906487-1559-1-git-send-email-akash.goel@intel.com Signed-off-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Akash Goel <akash.goel@intel.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
pps: kc: fix non-tickless system config dependency
CONFIG_NO_HZ currently only sets the default value of dynticks config so
if PPS kernel consumer needs periodic timer ticks it should depend on
!CONFIG_NO_HZ_COMMON instead of !CONFIG_NO_HZ.
Otherwise it is possible to enable it even on tickless system which has
CONFIG_NO_HZ not set and CONFIG_NO_HZ_IDLE (or CONFIG_NO_HZ_FULL) set.
Link: http://lkml.kernel.org/r/57E2B769.50202@maciej.szmigiero.name Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Acked-by: Rodolfo Giometti <giometti@enneenne.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hidehiro Kawai [Tue, 11 Oct 2016 20:54:26 +0000 (13:54 -0700)]
mips/panic: replace smp_send_stop() with kdump friendly version in panic path
Daniel Walker reported problems which happens when
crash_kexec_post_notifiers kernel option is enabled
(https://lkml.org/lkml/2015/6/24/44).
In that case, smp_send_stop() is called before entering kdump routines
which assume other CPUs are still online. As the result, kdump
routines fail to save other CPUs' registers. Additionally for MIPS
OCTEON, it misses to stop the watchdog timer.
To fix this problem, call a new kdump friendly function,
crash_smp_send_stop(), instead of the smp_send_stop() when
crash_kexec_post_notifiers is enabled. crash_smp_send_stop() is a
weak function, and it just call smp_send_stop(). Architecture
codes should override it so that kdump can work appropriately.
This patch provides MIPS version.
Fixes: f06e5153f4ae (kernel/panic.c: add "crash_kexec_post_notifiers" option) Link: http://lkml.kernel.org/r/20160810080950.11028.28000.stgit@sysi4-13.yrl.intra.hitachi.co.jp Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Reported-by: Daniel Walker <dwalker@fifo99.com> Cc: Dave Young <dyoung@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Daniel Walker <dwalker@fifo99.com> Cc: Xunlei Pang <xpang@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Toshi Kani <toshi.kani@hpe.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Daney <david.daney@cavium.com> Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: "Steven J. Hill" <steven.hill@cavium.com> Cc: Corey Minyard <cminyard@mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hidehiro Kawai [Tue, 11 Oct 2016 20:54:23 +0000 (13:54 -0700)]
x86/panic: replace smp_send_stop() with kdump friendly version in panic path
Daniel Walker reported problems which happens when
crash_kexec_post_notifiers kernel option is enabled
(https://lkml.org/lkml/2015/6/24/44).
In that case, smp_send_stop() is called before entering kdump routines
which assume other CPUs are still online. As the result, for x86, kdump
routines fail to save other CPUs' registers and disable virtualization
extensions.
To fix this problem, call a new kdump friendly function,
crash_smp_send_stop(), instead of the smp_send_stop() when
crash_kexec_post_notifiers is enabled. crash_smp_send_stop() is a weak
function, and it just call smp_send_stop(). Architecture codes should
override it so that kdump can work appropriately. This patch only
provides x86-specific version.
For Xen's PV kernel, just keep the current behavior.
NOTES:
- Right solution would be to place crash_smp_send_stop() before
__crash_kexec() invocation in all cases and remove smp_send_stop(), but
we can't do that until all architectures implement own
crash_smp_send_stop()
- crash_smp_send_stop()-like work is still needed by
machine_crash_shutdown() because crash_kexec() can be called without
entering panic()
Fixes: f06e5153f4ae (kernel/panic.c: add "crash_kexec_post_notifiers" option) Link: http://lkml.kernel.org/r/20160810080948.11028.15344.stgit@sysi4-13.yrl.intra.hitachi.co.jp Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Reported-by: Daniel Walker <dwalker@fifo99.com> Cc: Dave Young <dyoung@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Daniel Walker <dwalker@fifo99.com> Cc: Xunlei Pang <xpang@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Toshi Kani <toshi.kani@hpe.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Daney <david.daney@cavium.com> Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: "Steven J. Hill" <steven.hill@cavium.com> Cc: Corey Minyard <cminyard@mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jason Cooper [Tue, 11 Oct 2016 20:54:08 +0000 (13:54 -0700)]
unicore32: use simpler API for random address requests
Currently, all callers to randomize_range() set the length to 0 and
calculate end by adding a constant to the start address. We can simplify
the API to remove a bunch of needless checks and variables.
Use the new randomize_addr(start, range) call to set the requested
address.
Link: http://lkml.kernel.org/r/20160803233913.32511-7-jason@lakedaemon.net Signed-off-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Kees Cook <keescook@chromium.org> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jason Cooper [Tue, 11 Oct 2016 20:54:05 +0000 (13:54 -0700)]
tile: use simpler API for random address requests
Currently, all callers to randomize_range() set the length to 0 and
calculate end by adding a constant to the start address. We can simplify
the API to remove a bunch of needless checks and variables.
Use the new randomize_addr(start, range) call to set the requested
address.
Link: http://lkml.kernel.org/r/20160803233913.32511-6-jason@lakedaemon.net Signed-off-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Kees Cook <keescook@chromium.org> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Chris Metcalf <cmetcalf@mellanox.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jason Cooper [Tue, 11 Oct 2016 20:54:02 +0000 (13:54 -0700)]
arm64: use simpler API for random address requests
Currently, all callers to randomize_range() set the length to 0 and
calculate end by adding a constant to the start address. We can simplify
the API to remove a bunch of needless checks and variables.
Use the new randomize_addr(start, range) call to set the requested
address.
Link: http://lkml.kernel.org/r/20160803233913.32511-5-jason@lakedaemon.net Signed-off-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: "Russell King - ARM Linux" <linux@arm.linux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jason Cooper [Tue, 11 Oct 2016 20:53:59 +0000 (13:53 -0700)]
ARM: use simpler API for random address requests
Currently, all callers to randomize_range() set the length to 0 and
calculate end by adding a constant to the start address. We can simplify
the API to remove a bunch of needless checks and variables.
Use the new randomize_addr(start, range) call to set the requested
address.
Link: http://lkml.kernel.org/r/20160803233913.32511-4-jason@lakedaemon.net Signed-off-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Kees Cook <keescook@chromium.org> Cc: "Russell King - ARM Linux" <linux@arm.linux.org.uk> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jason Cooper [Tue, 11 Oct 2016 20:53:56 +0000 (13:53 -0700)]
x86: use simpler API for random address requests
Currently, all callers to randomize_range() set the length to 0 and
calculate end by adding a constant to the start address. We can simplify
the API to remove a bunch of needless checks and variables.
Use the new randomize_addr(start, range) call to set the requested
address.
Link: http://lkml.kernel.org/r/20160803233913.32511-3-jason@lakedaemon.net Signed-off-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Kees Cook <keescook@chromium.org> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H . Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jason Cooper [Tue, 11 Oct 2016 20:53:52 +0000 (13:53 -0700)]
random: simplify API for random address requests
To date, all callers of randomize_range() have set the length to 0, and
check for a zero return value. For the current callers, the only way to
get zero returned is if end <= start. Since they are all adding a
constant to the start address, this is unnecessary.
We can remove a bunch of needless checks by simplifying the API to do just
what everyone wants, return an address between [start, start + range).
While we're here, s/get_random_int/get_random_long/. No current call site
is adversely affected by get_random_int(), since all current range
requests are < UINT_MAX. However, we should match caller expectations to
avoid coming up short (ha!) in the future.
All current callers to randomize_range() chose to use the start address if
randomize_range() failed. Therefore, we simplify things by just returning
the start address on error.
randomize_range() will be removed once all callers have been converted
over to randomize_addr().
Link: http://lkml.kernel.org/r/20160803233913.32511-2-jason@lakedaemon.net Signed-off-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Kees Cook <keescook@chromium.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Roberts, William C" <william.c.roberts@intel.com> Cc: Yann Droneaud <ydroneaud@opteya.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H . Peter Anvin" <hpa@zytor.com> Cc: Nick Kralevich <nnk@google.com> Cc: Jeffrey Vander Stoep <jeffv@google.com> Cc: Daniel Cashman <dcashman@android.com> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ales Novak [Tue, 11 Oct 2016 20:53:46 +0000 (13:53 -0700)]
ptrace: clear TIF_SYSCALL_TRACE on ptrace detach
On __ptrace_detach(), called from do_exit()->exit_notify()->
forget_original_parent()->exit_ptrace(), the TIF_SYSCALL_TRACE in
thread->flags of the tracee is not cleared up. This results in the
tracehook_report_syscall_* being called (though there's no longer a tracer
listening to that) upon its further syscalls.
Example scenario - attach "strace" to a running process and kill it (the
strace) with SIGKILL. You'll see that the syscall trace hooks are still
being called.
The clearing of this flag should be moved from ptrace_detach() to
__ptrace_detach().
pipe: cap initial pipe capacity according to pipe-max-size limit
This is a patch that provides behavior that is more consistent, and
probably less surprising to users. I consider the change optional, and
welcome opinions about whether it should be applied.
By default, pipes are created with a capacity of 64 kiB. However,
/proc/sys/fs/pipe-max-size may be set smaller than this value. In this
scenario, an unprivileged user could thus create a pipe whose initial
capacity exceeds the limit. Therefore, it seems logical to cap the
initial pipe capacity according to the value of pipe-max-size.
The test program shown earlier in this patch series can be used to
demonstrate the effect of the change brought about with this patch:
The last two executions of 'test_F_SETPIPE_SZ' show that pipe-max-size
caps the initial allocation for a new pipe for unprivileged users, but
not for privileged users.
pipe: make account_pipe_buffers() return a value, and use it
This is an optional patch, to provide a small performance
improvement. Alter account_pipe_buffers() so that it returns the
new value in user->pipe_bufs. This means that we can refactor
too_many_pipe_buffers_soft() and too_many_pipe_buffers_hard() to
avoid the costs of repeated use of atomic_long_read() to get the
value user->pipe_bufs.
The limit checking in alloc_pipe_info() (used by pipe(2) and when
opening a FIFO) has the following problems:
(1) When checking capacity required for the new pipe, the checks against
the limit in /proc/sys/fs/pipe-user-pages-{soft,hard} are made
against existing consumption, and exclude the memory required for
the new pipe capacity. As a consequence: (1) the memory allocation
throttling provided by the soft limit does not kick in quite as
early as it should, and (2) the user can overrun the hard limit.
(2) As currently implemented, accounting and checking against the limits
is done as follows:
(a) Test whether the user has exceeded the limit.
(b) Make new pipe buffer allocation.
(c) Account new allocation against the limits.
This is racey. Multiple processes may pass point (a) simultaneously,
and then allocate pipe buffers that are accounted for only in step
(c). The race means that the user's pipe buffer allocation could be
pushed over the limit (by an arbitrary amount, depending on how
unlucky we were in the race). [Thanks to Vegard Nossum for spotting
this point, which I had missed.]
This patch addresses the above problems as follows:
* Alter the checks against limits to include the memory required for the
new pipe.
* Re-order the accounting step so that it precedes the buffer allocation.
If the accounting step determines that a limit has been reached, revert
the accounting and cause the operation to fail.
Replace an 'if' block that covers most of the code in this function
with a 'goto'. This makes the code a little simpler to read, and also
simplifies the next patch (fix limit checking in alloc_pipe_info())
The limit checking in pipe_set_size() (used by fcntl(F_SETPIPE_SZ))
has the following problems:
(1) When increasing the pipe capacity, the checks against the limits in
/proc/sys/fs/pipe-user-pages-{soft,hard} are made against existing
consumption, and exclude the memory required for the increased pipe
capacity. The new increase in pipe capacity can then push the total
memory used by the user for pipes (possibly far) over a limit. This
can also trigger the problem described next.
(2) The limit checks are performed even when the new pipe capacity is
less than the existing pipe capacity. This can lead to problems if a
user sets a large pipe capacity, and then the limits are lowered,
with the result that the user will no longer be able to decrease the
pipe capacity.
(3) As currently implemented, accounting and checking against the
limits is done as follows:
(a) Test whether the user has exceeded the limit.
(b) Make new pipe buffer allocation.
(c) Account new allocation against the limits.
This is racey. Multiple processes may pass point (a)
simultaneously, and then allocate pipe buffers that are accounted
for only in step (c). The race means that the user's pipe buffer
allocation could be pushed over the limit (by an arbitrary amount,
depending on how unlucky we were in the race). [Thanks to Vegard
Nossum for spotting this point, which I had missed.]
This patch addresses the above problems as follows:
* Perform checks against the limits only when increasing a pipe's
capacity; an unprivileged user can always decrease a pipe's capacity.
* Alter the checks against limits to include the memory required for
the new pipe capacity.
* Re-order the accounting step so that it precedes the buffer
allocation. If the accounting step determines that a limit has
been reached, revert the accounting and cause the operation to fail.
The program below can be used to demonstrate problems 1 and 2, and the
effect of the fix. The program takes one or more command-line arguments.
The first argument specifies the number of pipes that the program should
create. The remaining arguments are, alternately, pipe capacities that
should be set using fcntl(F_SETPIPE_SZ), and sleep intervals (in
seconds) between the fcntl() operations. (The sleep intervals allow the
possibility to change the limits between fcntl() operations.)
Problem 1
=========
Using the test program on an unpatched kernel, we first set some
limits:
There is a small chance that the change to fix this problem could
break user-space, since there are cases where fcntl(F_SETPIPE_SZ)
calls that previously succeeded might fail. However, the chances are
small, since (a) the pipe-user-pages-{soft,hard} limits are new (in
4.5), and the default soft/hard limits are high/unlimited. Therefore,
it seems warranted to make these limits operate more precisely (and
behave more like what users probably expect).
Problem 2
=========
Running the test program on an unpatched kernel, we first set some limits:
Now perform two fcntl(F_SETPIPE_SZ) operations on a single pipe,
first setting a pipe capacity (10MB), sleeping for a few seconds,
during which time the hard limit is lowered, and then set pipe
capacity to a smaller amount (5MB):
v2
* Switch order of test in 'if' statement to avoid function call
(to capability()) in normal path. [This is a fix to a preexisting
wart in the code. Thanks to Willy Tarreau]
* Perform (size > pipe_max_size) check before calling
account_pipe_buffers(). [Thanks to Vegard Nossum]
Quoting Vegard:
The potential problem happens if the user passes a very large number
which will overflow pipe->user->pipe_bufs.
On 32-bit, sizeof(int) == sizeof(long), so if they pass arg = INT_MAX
then round_pipe_size() returns INT_MAX. Although it's true that the
accounting is done in terms of pages and not bytes, so you'd need on
the order of (1 << 13) = 8192 processes hitting the limit at the same
time in order to make it overflow, which seems a bit unlikely.
(See https://lkml.org/lkml/2016/8/12/215 for another discussion on the
limit checking)
pipe: refactor argument for account_pipe_buffers()
This is a preparatory patch for following work. account_pipe_buffers()
performs accounting in the 'user_struct'. There is no need to pass a
pointer to a 'pipe_inode_info' struct (which is then dereferenced to
obtain a pointer to the 'user' field). Instead, pass a pointer directly
to the 'user_struct'. This change is needed in preparation for a
subsequent patch that the fixes the limit checking in alloc_pipe_info()
(and the resulting code is a little more logical).
pipe: move limit checking logic into pipe_set_size()
This is a preparatory patch for following work. Move the F_SETPIPE_SZ
limit-checking logic from pipe_fcntl() into pipe_set_size(). This
simplifies the code a little, and allows for reworking required in
a later patch that fixes the limit checking in pipe_set_size()
When changing a pipe's capacity with fcntl(F_SETPIPE_SZ), various limits
defined by /proc/sys/fs/pipe-* files are checked to see if unprivileged
users are exceeding limits on memory consumption.
While documenting and testing the operation of these limits I noticed
that, as currently implemented, these checks have a number of problems:
(1) When increasing the pipe capacity, the checks against the limits
in /proc/sys/fs/pipe-user-pages-{soft,hard} are made against
existing consumption, and exclude the memory required for the
increased pipe capacity. The new increase in pipe capacity can then
push the total memory used by the user for pipes (possibly far) over
a limit. This can also trigger the problem described next.
(2) The limit checks are performed even when the new pipe capacity
is less than the existing pipe capacity. This can lead to problems
if a user sets a large pipe capacity, and then the limits are
lowered, with the result that the user will no longer be able to
decrease the pipe capacity.
(3) As currently implemented, accounting and checking against the
limits is done as follows:
(a) Test whether the user has exceeded the limit.
(b) Make new pipe buffer allocation.
(c) Account new allocation against the limits.
This is racey. Multiple processes may pass point (a) simultaneously,
and then allocate pipe buffers that are accounted for only in step
(c). The race means that the user's pipe buffer allocation could be
pushed over the limit (by an arbitrary amount, depending on how
unlucky we were in the race). [Thanks to Vegard Nossum for spotting
this point, which I had missed.]
This patch series addresses these three problems.
This patch (of 8):
This is a minor preparatory patch. After subsequent patches,
round_pipe_size() will be called from pipe_set_size(), so place
round_pipe_size() above pipe_set_size().
Having this in autofs_i.h gives illusion that uncommenting this enables
pr_debug(), but it doesn't enable all the pr_debug() in autofs because
inclusion order matters.
XFS has the same DEBUG macro in its core header fs/xfs/xfs.h, however XFS
seems to have a rule to include this prior to other XFS headers as well as
kernel headers. This is not the case with autofs, and DEBUG could be
enabled via Makefile, so autofs should just get rid of this comment to
make the code less confusing. It's a comment, so there is literally no
functional difference.
Link: http://lkml.kernel.org/r/20160831033409.9910.77067.stgit@pluto.themaw.net Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@gmail.com> Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ian Kent [Tue, 11 Oct 2016 20:53:05 +0000 (13:53 -0700)]
autofs: add autofs_dev_ioctl_version() for AUTOFS_DEV_IOCTL_VERSION_CMD
No functional changes, based on the following justification.
1. Make the code more consistent using the ioctl vector _ioctls[],
rather than assigning NULL only for this ioctl command.
2. Remove goto done; for better maintainability in the long run.
3. The existing code is based on the fact that validate_dev_ioctl()
sets ioctl version for any command, but AUTOFS_DEV_IOCTL_VERSION_CMD
should explicitly set it regardless of the default behavior.
Link: http://lkml.kernel.org/r/20160812024846.12352.9885.stgit@pluto.themaw.net Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@gmail.com> Signed-off-by: Ian Kent <ikent@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ian Kent [Tue, 11 Oct 2016 20:53:02 +0000 (13:53 -0700)]
autofs: fix dev ioctl number range check
The count of miscellaneous device ioctls in fs/autofs4/autofs_i.h is wrong.
The number of ioctls is the difference between AUTOFS_DEV_IOCTL_VERSION_CMD
and AUTOFS_DEV_IOCTL_ISMOUNTPOINT_CMD (14) not the difference between
AUTOFS_IOC_COUNT and 11 (21).
Tomohiro Kusumi [Tue, 11 Oct 2016 20:52:56 +0000 (13:52 -0700)]
autofs: update struct autofs_dev_ioctl in Documentation
Sync with changes made by commit 730c9eeca980 ("autofs4: improve
parameter usage") which introduced an union for various ioctl commands
instead of having statically named arg1,2.
This commit simply replaces arg1,2 with the corresponding fields without
changing semantics.
Link: http://lkml.kernel.org/r/20160812024831.12352.24667.stgit@pluto.themaw.net Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@gmail.com> Signed-off-by: Ian Kent <ikent@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tomohiro Kusumi [Tue, 11 Oct 2016 20:52:53 +0000 (13:52 -0700)]
autofs: fix Documentation regarding devid on ioctl
The explanation on how ioctl handles devid seems incorrect. Userspace who
calls this ioctl has no input regarding devid, and ioctl implementation
retrieves devid via superblock.
Link: http://lkml.kernel.org/r/20160812024825.12352.13486.stgit@pluto.themaw.net Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@gmail.com> Signed-off-by: Ian Kent <ikent@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tomohiro Kusumi [Tue, 11 Oct 2016 20:52:51 +0000 (13:52 -0700)]
autofs: remove AUTOFS_DEVID_LEN
This macro was never used by neither kernel nor userspace, and also
doesn't represent "devid length" in bytes. (unless it was added to mean
something else).
Link: http://lkml.kernel.org/r/20160812024820.12352.21210.stgit@pluto.themaw.net Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@gmail.com> Signed-off-by: Ian Kent <ikent@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tomohiro Kusumi [Tue, 11 Oct 2016 20:52:31 +0000 (13:52 -0700)]
autofs: test autofs versions first on sb initialization
This patch does what the below comment says. It could be and it's
considered better to do this first before various functions get called
during initialization.
/* Couldn't this be tested earlier? */
Link: http://lkml.kernel.org/r/20160812024744.12352.43075.stgit@pluto.themaw.net Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@gmail.com> Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
kprobes: include <asm/sections.h> instead of <asm-generic/sections.h>
asm-generic headers are generic implementations for architecture specific
code and should not be included by common code. Thus use the asm/ version
of sections.h to get at the linker sections.
Link: http://lkml.kernel.org/r/1473602302-6208-1-git-send-email-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joe Perches [Tue, 11 Oct 2016 20:52:11 +0000 (13:52 -0700)]
checkpatch: add --strict test for precedence challenged macro arguments
Add a test for macro arguents that have a non-comma leading or trailing
operator where the argument isn't parenthesized to avoid possible precedence
issues.
Link: http://lkml.kernel.org/r/47715508972f8d786f435e583ff881dbeee3a114.1473745855.git.joe@perches.com Signed-off-by: Joe Perches <joe@perches.com> Cc: Andy Whitcroft <apw@canonical.com> Cc: Julia Lawall <julia.lawall@lip6.fr> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>