Yogesh Gaur [Wed, 21 Oct 2015 22:04:02 +0000 (09:04 +1100)]
ipc/msg.c: use freezable blocking call
Avoid waking up every thread sleeping in a msgrcv call during suspend and
resume by calling a freezable blocking call. Previous patches modified
the freezer to avoid sending wakeups to threads that are blocked in
freezable blocking calls.
Ref: https://lkml.org/lkml/2013/5/1/424
Backtrace:
[<c03e3924>] (__schedule+0x0/0x5d8) from [<c03e3f88>] (schedule+0x8c/0x90)
[<c03e3efc>] (schedule+0x0/0x90) from [<c01ef9f8>] (do_msgrcv+0x2e0/0x368)
[<c01ef718>] (do_msgrcv+0x0/0x368) from [<c01efaac>] (SyS_msgrcv+0x2c/0x38)
[<c01efa80>] (SyS_msgrcv+0x0/0x38) from [<c001a180>] (ret_fast_syscall+0x0/0x48)
tPlay0Cb2 R running 0 297 204 0x00000001
This call was selected to be converted to a freezable call because it
doesn't hold any locks or release any resources when interrupted that
might be needed by another freezing task or a kernel driver during
suspend, and is a common site where idle userspace tasks are blocked.
Signed-off-by: Yogesh Gaur <yn.gaur@samsung.com> Signed-off-by: Manjeet Pawar <manjeet.p@samsung.com> Signed-off-by: Maninder Singh <maninder1.s@samsung.com>
Reviewed-by : Ajeet Yadav <ajeet.y@samsung.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Maninder Singh [Wed, 21 Oct 2015 22:04:02 +0000 (09:04 +1100)]
ipc/msg.c: msgsnd: use freezable blocking call
When any task is stuck in Interruptible or Uninterruptible state then
waking up of that task fails. If wakeup fails, then suspend operation
fails and all process send to frezeer state at this moment also gets
wakeup. Correct implementation is that if suspend fails, then kernel
would retry suspend operation again after some specific timeinterval for
some fixed retry count. But as changes suggested by Mr Colin Cross
(https://lkml.org/lkml/2013/5/1/424), for the system calls for which issue
has been faced process flag being appended with PF_FREEZER_SKIP.
We are testing some scenarios in which we have to do multi suspend-resume
scenario, and we faced the problem, hence the suggested changes for msgsnd
and msgrcv.
Avoid waking up every thread sleeping in a msgsnd call during suspend and
resume by calling a freezable blocking call. Previous patches modified
the freezer to avoid sending wakeups to threads that are blocked in
freezable blocking calls.
This call was selected to be converted to a freezable call because it
doesn't hold any locks or release any resources when interrupted that
might be needed by another freezing task or a kernel driver during
suspend, and is a common site where idle userspace tasks are blocked.
Davidlohr Bueso [Wed, 21 Oct 2015 22:04:02 +0000 (09:04 +1100)]
ipc,msg: drop dst nil validation in copy_msg
d0edd8528362 ("ipc: convert invalid scenarios to use WARN_ON") relaxed the
nil dst parameter check, originally being a full BUG_ON. However, this
check seems quite unnecessary when the only purpose is for
ceckpoint/restore (MSG_COPY flag):
o The copy variable is set initially to nil, apparently as a way of
ensuring that prepare_copy is previously called. Which is in fact done,
unconditionally at the beginning of do_msgrcv.
o There is no concurrency with 'copy' (stack allocated in do_msgrcv).
Furthermore, any errors in 'copy' (and thus prepare_copy/copy_msg) should
always handled by IS_ERR() family. Therefore remove this check altogether
as it can never occur with the current users.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Cc: Stanislav Kinsbursky <skinsbursky@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Vitaly Kuznetsov [Wed, 21 Oct 2015 22:04:01 +0000 (09:04 +1100)]
panic: release stale console lock to always get the logbuf printed out
In some cases we may end up killing the CPU holding the console lock
while still having valuable data in logbuf. E.g. I'm observing the
following:
- A crash is happening on one CPU and console_unlock() is being called on
some other.
- console_unlock() tries to print out the buffer before releasing the lock
and on slow console it takes time.
- in the meanwhile crashing CPU does lots of printk()-s with valuable data
(which go to the logbuf) and sends IPIs to all other CPUs.
- console_unlock() finishes printing previous chunk and enables interrupts
before trying to print out the rest, the CPU catches the IPI and never
releases console lock.
This is not the only possible case: in VT/fb subsystems we have many other
console_lock()/console_unlock() users. Non-masked interrupts (or
receiving NMI in case of extreme slowness) will have the same result.
Getting the whole console buffer printed out on crash should be top
priority.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Baoquan He <bhe@redhat.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Xie XiuQi <xiexiuqi@huawei.com> Cc: Seth Jennings <sjenning@redhat.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Robin Murphy [Wed, 21 Oct 2015 22:04:01 +0000 (09:04 +1100)]
dma-debug: allow poisoning nonzero allocations
Since some dma_alloc_coherent implementations return a zeroed buffer
regardless of whether __GFP_ZERO is passed, there exist drivers which are
implicitly dependent on this and pass otherwise uninitialised buffers to
hardware. This can lead to subtle and awkward-to-debug issues using those
drivers on different platforms, where nonzero uninitialised junk may for
instance occasionally look like a valid command which causes the hardware
to start misbehaving. To help with debugging such issues, add the option
to make uninitialised buffers much more obvious.
Signed-off-by: Robin Murphy <robin.murphy@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Sakari Ailus <sakari.ailus@iki.fi> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Robin Murphy [Wed, 21 Oct 2015 22:04:01 +0000 (09:04 +1100)]
dma-debug: check nents in dma_sync_sg*
Like dma_unmap_sg, dma_sync_sg* should be called with the original number
of entries passed to dma_map_sg, so do the same check in the sync path as
we do in the unmap path.
Signed-off-by: Robin Murphy <robin.murphy@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Sakari Ailus <sakari.ailus@iki.fi> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Sakari Ailus <sakari.ailus@iki.fi> Cc: Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Robin Murphy [Wed, 21 Oct 2015 22:04:00 +0000 (09:04 +1100)]
dma-mapping: tidy up dma_parms default handling
Many DMA controllers and other devices set max_segment_size to
indicate their scatter-gather capability, but have no interest in
segment_boundary_mask. However, the existence of a dma_parms structure
precludes the use of any default value, leaving them as zeros (assuming
a properly kzalloc'ed structure). If a well-behaved IOMMU (or SWIOTLB)
then tries to respect this by ensuring a mapped segment does not cross
a zero-byte boundary, hilarity ensues.
Since zero is a nonsensical value for either parameter, treat it as an
indicator for "default", as might be expected. In the process, clean up
a bit by replacing the bare constants with slightly more meaningful
macros and removing the superfluous "else" statements.
Signed-off-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Sumit Semwal <sumit.semwal@linaro.org> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Sakari Ailus <sakari.ailus@iki.fi> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Ben Segall [Wed, 21 Oct 2015 22:04:00 +0000 (09:04 +1100)]
pidns: fix set/getpriority and ioprio_set/get in PRIO_USER mode
setpriority(PRIO_USER, 0, x) will change the priority of tasks outside of
the current pid namespace. This is in contrast to both the other modes of
setpriority and the example of kill(-1). Fix this. getpriority and
ioprio have the same failure mode, fix them too.
Eric said:
: After some more thinking about it this patch sounds justifiable.
:
: My goal with namespaces is not to build perfect isolation mechanisms
: as that can get into ill defined territory, but to build well defined
: mechanisms. And to handle the corner cases so you can use only
: a single namespace with well defined results.
:
: In this case you have found the two interfaces I am aware of that
: identify processes by uid instead of by pid. Which quite frankly is
: weird. Unfortunately the weird unexpected cases are hard to handle
: in the usual way.
:
: I was hoping for a little more information. Changes like this one we
: have to be careful of because someone might be depending on the current
: behavior. I don't think they are and I do think this make sense as part
: of the pid namespace.
Signed-off-by: Ben Segall <bsegall@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Ambrose Feinstein <ambrose@google.com> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
HATAYAMA Daisuke [Wed, 21 Oct 2015 22:04:00 +0000 (09:04 +1100)]
kdump, vmcoreinfo: report actual value of phys_base
Currently, VMCOREINFO note information reports the virtual address of
phys_base that is assigned to symbol phys_base. But this doesn't make
sense because to refer to phys_base, it's necessary to get the value of
phys_base itself we are now about to refer to.
Userland tools related to kdump such as makedumpfile and crash utility so
far have made some efforts to calculate phys_base on crash dump formats
generated by mechanisms running outside Linux kernel, such as virtual
machine hypervisor such as qemu dump, which ordinary users use via virsh
dump, or ones implemented on vendor specific firmware.
That is, find a kernel data whose virtual and physical addresses are
available via its note information and calculate phys_base from it.
However, such data structure is not the one prepared for phys_base
purpose. There's no guarantee that other crash dump mechanisms include
such information that can be used to calculate phys_base similarly.
To get VMCOREINFO in vmcore, it's easy to use strings and grep commands
like this; VMCOREINFO consists of simple string:
This is also useful to get value of phys_base in kdump 2nd kernel
contained in vmcore using the above-mentioned external crash dump
mechanism; kdump 2nd kernel is an inherently relocated kernel.
This commit doesn't remove VMCOREINFO_SYMBOL(phys_base) line because
makedumpfile refers to it and if removing it, old versions makedumpfile
doesn't work well.
Signed-off-by: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp> Cc: Dave Anderson <anderson@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Minfei Huang [Wed, 21 Oct 2015 22:04:00 +0000 (09:04 +1100)]
kexec: use file name as the output message prefix
kexec output message misses the prefix "kexec", when Dave Young split the
kexec code. Now, we use file name as the output message prefix.
Currently, the format of output message:
[ 140.290795] SYSC_kexec_load: hello, world
[ 140.291534] kexec: sanity_check_segment_list: hello, world
Ideally, the format of output message:
[ 30.791503] kexec: SYSC_kexec_load, Hello, world
[ 79.182752] kexec_core: sanity_check_segment_list, Hello, world
Remove the custom prefix "kexec" in output message.
Signed-off-by: Minfei Huang <mnfhuang@gmail.com> Acked-by: Dave Young <dyoung@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Greg Thelen [Wed, 21 Oct 2015 22:03:59 +0000 (09:03 +1100)]
fs, seqfile: always allow oom killer
Since 5cec38ac866b ("fs, seq_file: fallback to vmalloc instead of oom kill
processes") seq_buf_alloc() avoids calling the oom killer for PAGE_SIZE or
smaller allocations; but larger allocations can use the oom killer via
vmalloc(). Thus reads of small files can return ENOMEM, but larger files
use the oom killer to avoid ENOMEM.
The effect of this bug is that reads from /proc and other virtual
filesystems can return ENOMEM instead of the preferred behavior - oom
killing something (possibly the calling process). I don't know of anyone
except Google who has noticed the issue.
I suspect the fix is more needed in smaller systems where there isn't any
reclaimable memory. But these seem like the kinds of systems which
probably don't use the oom killer for production situations.
Memory overcommit requires use of the oom killer to select a victim
regardless of file size.
Enable oom killer for small seq_buf_alloc() allocations.
Fixes: 5cec38ac866b ("fs, seq_file: fallback to vmalloc instead of oom kill processes") Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: Greg Thelen <gthelen@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Andy Shevchenko [Wed, 21 Oct 2015 22:03:59 +0000 (09:03 +1100)]
seq_file: reuse string_escape_str()
strint_escape_str() escapes input string by given criteria. In case of
seq_escape() the criteria is to convert some characters to their octal
representation.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Andy Shevchenko [Wed, 21 Oct 2015 22:03:59 +0000 (09:03 +1100)]
fs/seq_file: use seq_* helpers in seq_hex_dump()
This improves code readability.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Oleg Nesterov [Wed, 21 Oct 2015 22:03:59 +0000 (09:03 +1100)]
coredump: ensure all coredumping tasks have SIGNAL_GROUP_COREDUMP
task_will_free_mem() is wrong in many ways, and in particular the
SIGNAL_GROUP_COREDUMP check is not reliable: a task can participate in the
coredumping without SIGNAL_GROUP_COREDUMP bit set.
change zap_threads() paths to always set SIGNAL_GROUP_COREDUMP even if
other CLONE_VM processes can't react to SIGKILL. Fortunately, at least
oom-kill case if fine; it kills all tasks sharing the same mm, so it
should also kill the process which actually dumps the core.
The change in prepare_signal() is not strictly necessary, it just ensures
that the patch does not bring another subtle behavioural change. But it
reminds us that this SIGNAL_GROUP_EXIT/COREDUMP case needs more changes.
Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Kyle Walker <kwalker@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Stanislav Kozina <skozina@redhat.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Oleg Nesterov [Wed, 21 Oct 2015 22:03:58 +0000 (09:03 +1100)]
signal: introduce kernel_signal_stop() to fix jffs2_garbage_collect_thread()
jffs2_garbage_collect_thread() can race with SIGCONT and sleep in
TASK_STOPPED state after it was already sent. Add the new helper,
kernel_signal_stop(), which does this correctly.
Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Tejun Heo <tj@kernel.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Felipe Balbi <balbi@ti.com> Cc: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Oleg Nesterov [Wed, 21 Oct 2015 22:03:58 +0000 (09:03 +1100)]
signal: turn dequeue_signal_lock() into kernel_dequeue_signal()
1. Rename dequeue_signal_lock() to kernel_dequeue_signal(). This
matches another "for kthreads only" kernel_sigaction() helper.
2. Remove the "tsk" and "mask" arguments, they are always current
and current->blocked. And it is simply wrong if tsk != current.
3. We could also remove the 3rd "siginfo_t *info" arg but it looks
potentially useful. However we can simplify the callers if we
change kernel_dequeue_signal() to accept info => NULL.
4. Remove _irqsave, it is never called from atomic context.
Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Tejun Heo <tj@kernel.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Felipe Balbi <balbi@ti.com> Cc: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Oleg Nesterov [Wed, 21 Oct 2015 22:03:58 +0000 (09:03 +1100)]
signals: kill block_all_signals() and unblock_all_signals()
It is hardly possible to enumerate all problems with block_all_signals()
and unblock_all_signals(). Just for example,
1. block_all_signals(SIGSTOP/etc) simply can't help if the caller is
multithreaded. Another thread can dequeue the signal and force the
group stop.
2. Even is the caller is single-threaded, it will "stop" anyway. It
will not sleep, but it will spin in kernel space until SIGCONT or
SIGKILL.
And a lot more. In short, this interface doesn't work at all, at least
the last 10+ years.
Daniel said:
Yeah the only times I played around with the DRM_LOCK stuff was when
old drivers accidentally deadlocked - my impression is that the entire
DRM_LOCK thing was never really tested properly ;-) Hence I'm all for
purging where this leaks out of the drm subsystem.
Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Dave Airlie <airlied@redhat.com> Cc: Richard Weinberger <richard@nod.at> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Namjae Jeon [Wed, 21 Oct 2015 22:03:57 +0000 (09:03 +1100)]
fat: add fat_fallocate operation
Implement preallocation via the fallocate syscall on VFAT partitions.
This patch is based on an earlier patch of the same name which had some
issues detailed below and did not get accepted. Refer
https://lkml.org/lkml/2007/12/22/130.
a) The preallocated space was not persistent when the
FALLOC_FL_KEEP_SIZE flag was set. It will deallocate cluster at evict
time.
b) There was no need to zero out the clusters when the flag was set
Instead of doing an expanding truncate, just allocate clusters and add
them to the fat chain. This reduces preallocation time.
Compatibility with windows:
There are no issues when FALLOC_FL_KEEP_SIZE is not set because it just
does an expanding truncate. Thus reading from the preallocated area on
windows returns null until data is written to it.
When a file with preallocated area using the FALLOC_FL_KEEP_SIZE was
written to on windows, the windows driver freed-up the preallocated
clusters and allocated new clusters for the new data. The freed up
clusters gets reflected in the free space available for the partition
which can be seen from the Volume properties.
The windows chkdsk tool also does not report any errors on a disk
containing files with preallocated space.
And there is also no issue using linux fat fsck. because discard
preallocated clusters at repair time.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Ryusuke Konishi [Wed, 21 Oct 2015 22:03:57 +0000 (09:03 +1100)]
nilfs2: fix gcc uninitialized-variable warnings in powerpc build
Some false positive warnings are reported for powerpc build.
The following warnings are reported in
http://kisskb.ellerman.id.au/kisskb/buildresult/12519703/
CC fs/nilfs2/super.o
fs/nilfs2/super.c: In function 'nilfs_resize_fs':
fs/nilfs2/super.c:376:2: warning: 'blocknr' may be used uninitialized in this function [-Wuninitialized]
fs/nilfs2/super.c:362:11: note: 'blocknr' was declared here
CC fs/nilfs2/recovery.o
fs/nilfs2/recovery.c: In function 'nilfs_salvage_orphan_logs':
fs/nilfs2/recovery.c:631:21: warning: 'sum' may be used uninitialized in this function [-Wuninitialized]
fs/nilfs2/recovery.c:585:32: note: 'sum' was declared here
fs/nilfs2/recovery.c: In function 'nilfs_search_super_root':
fs/nilfs2/recovery.c:873:11: warning: 'sum' may be used uninitialized in this function [-Wuninitialized]
Another similar warning is reported in
http://kisskb.ellerman.id.au/kisskb/buildresult/12520079/
CC fs/nilfs2/btree.o
fs/nilfs2/btree.c: In function 'nilfs_btree_convert_and_insert':
include/asm-generic/bitops/non-atomic.h:105:20: warning: 'bh' may be used uninitialized in this function [-Wuninitialized]
fs/nilfs2/btree.c:1859:22: note: 'bh' was declared here
This cleans out these warnings by forcing the variables to be initialized.
Ryusuke Konishi [Wed, 21 Oct 2015 22:03:56 +0000 (09:03 +1100)]
nilfs2: fix gcc unused-but-set-variable warnings
Fix the following build warnings:
$ make W=1
[...]
CC [M] fs/nilfs2/btree.o
fs/nilfs2/btree.c: In function 'nilfs_btree_split':
fs/nilfs2/btree.c:923:8: warning: variable 'newptr' set but not used [-Wunused-but-set-variable]
__u64 newptr;
^
fs/nilfs2/btree.c:922:8: warning: variable 'newkey' set but not used [-Wunused-but-set-variable]
__u64 newkey;
^
CC [M] fs/nilfs2/dat.o
fs/nilfs2/dat.c: In function 'nilfs_dat_prepare_end':
fs/nilfs2/dat.c:158:8: warning: variable 'start' set but not used [-Wunused-but-set-variable]
__u64 start;
^
CC [M] fs/nilfs2/segment.o
fs/nilfs2/segment.c: In function 'nilfs_segctor_do_immediate_flush':
fs/nilfs2/segment.c:2433:6: warning: variable 'err' set but not used [-Wunused-but-set-variable]
int err;
^
CC [M] fs/nilfs2/sufile.o
fs/nilfs2/sufile.c: In function 'nilfs_sufile_alloc':
fs/nilfs2/sufile.c:320:27: warning: variable 'ncleansegs' set but not used [-Wunused-but-set-variable]
unsigned long nsegments, ncleansegs, nsus, cnt;
^
CC [M] fs/nilfs2/alloc.o
fs/nilfs2/alloc.c: In function 'nilfs_palloc_prepare_alloc_entry':
fs/nilfs2/alloc.c:478:38: warning: variable 'groups_per_desc_block' set but not used [-Wunused-but-set-variable]
unsigned long n, entries_per_group, groups_per_desc_block;
^
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Ryusuke Konishi [Wed, 21 Oct 2015 22:03:56 +0000 (09:03 +1100)]
MAINTAINERS: nilfs2: add header file for tracing
This adds header file "include/trace/events/nilfs2.h" to maintainer-ship
of nilfs2 so that updates to the nilfs2 header file go to the mailing list
of nilfs2.
Hitoshi Mitake [Wed, 21 Oct 2015 22:03:56 +0000 (09:03 +1100)]
nilfs2: add tracepoints for analyzing reading and writing metadata files
This patch adds tracepoints for analyzing requests of reading and writing
metadata files. The tracepoints cover every in-place mdt files (cpfile,
sufile, and datfile).
Hitoshi Mitake [Wed, 21 Oct 2015 22:03:56 +0000 (09:03 +1100)]
nilfs2: add tracepoints for analyzing sufile manipulation
This patch adds tracepoints which would be useful for analyzing segment
usage from a perspective of high level sufile manipulation (check, alloc,
free). sufile is an important in-place updated metadata file, so
analyzing the behavior would be useful for performance turning.
Hitoshi Mitake [Wed, 21 Oct 2015 22:03:56 +0000 (09:03 +1100)]
nilfs2: add a tracepoint for transaction events
This patch adds a tracepoint for transaction events of nilfs. With the
tracepoint, these events can be tracked: begin, abort, commit, trylock,
lock, and unlock. Basically, these events have corresponding functions
e.g. begin event corresponds nilfs_transaction_begin(). The unlock event
is an exception. It corresponds to the iteration in
nilfs_transaction_lock().
Only one tracepoint is introcued: nilfs2_transaction_transition. The
above events are distinguished with newly introduced enum. With this
tracepoint, we can analyse a critical section of segment constructoin.
Sample output by tpoint of perf-tools:
cp-4457 [000] ...1 63.266220: nilfs2_transaction_transition: sb = ffff8802112b8800 ti = ffff8800bf5ccc58 count = 1 flags = 9 state = BEGIN
cp-4457 [000] ...1 63.266221: nilfs2_transaction_transition: sb = ffff8802112b8800 ti = ffff8800bf5ccc58 count = 0 flags = 9 state = COMMIT
cp-4457 [000] ...1 63.266221: nilfs2_transaction_transition: sb = ffff8802112b8800 ti = ffff8800bf5ccc58 count = 0 flags = 9 state = COMMIT
segctord-4371 [001] ...1 68.261196: nilfs2_transaction_transition: sb = ffff8802112b8800 ti = ffff8800b889bdf8 count = 0 flags = 10 state = TRYLOCK
segctord-4371 [001] ...1 68.261280: nilfs2_transaction_transition: sb = ffff8802112b8800 ti = ffff8800b889bdf8 count = 0 flags = 10 state = LOCK
segctord-4371 [001] ...1 68.261877: nilfs2_transaction_transition: sb = ffff8802112b8800 ti = ffff8800b889bdf8 count = 1 flags = 10 state = BEGIN
segctord-4371 [001] ...1 68.262116: nilfs2_transaction_transition: sb = ffff8802112b8800 ti = ffff8800b889bdf8 count = 0 flags = 18 state = COMMIT
segctord-4371 [001] ...1 68.265032: nilfs2_transaction_transition: sb = ffff8802112b8800 ti = ffff8800b889bdf8 count = 0 flags = 18 state = UNLOCK
segctord-4371 [001] ...1 132.376847: nilfs2_transaction_transition: sb = ffff8802112b8800 ti = ffff8800b889bdf8 count = 0 flags = 10 state = TRYLOCK
This patch also does trivial cleaning of comma usage in collection stage
transition event for consistent coding style.
Signed-off-by: Hitoshi Mitake <mitake.hitoshi@lab.ntt.co.jp> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Hitoshi Mitake [Wed, 21 Oct 2015 22:03:56 +0000 (09:03 +1100)]
nilfs2: add a tracepoint for tracking stage transition of segment construction
This patch adds a tracepoint for tracking stage transition of block
collection in segment construction. With the tracepoint, we can analysis
the behavior of segment construction in depth. It would be useful for
bottleneck detection and debugging, etc.
The tracepoint is created with the standard trace API of linux (like ext3,
ext4, f2fs and btrfs). So we can analysis with existing tools easily. Of
course, more detailed analysis will be possible if we can create nilfs
specific analysis tools.
Below is an example of event dump with Brendan Gregg's perf-tools
(https://github.com/brendangregg/perf-tools). Time consumption between
each stage can be obtained.
For capturing transition correctly, this patch adds wrappers for the
member scnt of nilfs_cstage. With this change, every transition of the
stage can produce trace event in a correct manner.
Signed-off-by: Hitoshi Mitake <mitake.hitoshi@lab.ntt.co.jp> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Ryusuke Konishi [Wed, 21 Oct 2015 22:03:55 +0000 (09:03 +1100)]
nilfs2: free unused dat file blocks during garbage collection
As a nilfs2 volume ages, the amount of available disk space decreases
little by little due to bloat of DAT (disk address translation) metadata
file. Even if we delete all files in a file system and free their block
addresses from the DAT file through a garbage collection, empty DAT blocks
are not freed.
This fixes the issue by extending the deallocator of block addresses so
that empty data blocks and empty bitmap blocks of DAT are deleted.
The following comparison shows the effect of this patch. Each shows disk
amount information of a nilfs2 volume that we cleaned out by deleting all
files and running gc after having filled 90% of its capacity.
Before:
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sda1 5001052123022844472072192 1% /test
After:
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sda1 500105212 16380 475078656 1% /test
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Ryusuke Konishi [Wed, 21 Oct 2015 22:03:55 +0000 (09:03 +1100)]
nilfs2: add helper functions to delete blocks from dat file
This adds delete functions for data blocks of metadata files using bitmap
based allocator. nilfs_palloc_delete_entry_block() deletes an entry block
(e.g. block storing dat entries), and nilfs_palloc_delete_bitmap_block()
deletes a bitmap block, respectively.
These helpers are intended to be used in the successive change on
deallocator of block addresses ("nilfs2: free unused dat file blocks
during garbage collection").
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Ryusuke Konishi [Wed, 21 Oct 2015 22:03:55 +0000 (09:03 +1100)]
nilfs2: get rid of nilfs_palloc_group_is_in()
This unfolds nilfs_palloc_group_is_in() helper function into
nilfs_palloc_freev() function to simplify a range check and an index
calculation repeatedy performed in a loop of the function.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The current implementation of nilfs_palloc_find_available_slot() function
is overkill. The underlying bit search routine is well optimized, so this
uses it more simply in nilfs_palloc_find_available_slot().
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Ryusuke Konishi [Wed, 21 Oct 2015 22:03:55 +0000 (09:03 +1100)]
nilfs2: do not call nilfs_mdt_bgl_lock() needlessly
In the bitmap based allocator implementation, nilfs_mdt_bgl_lock() helper
is frequently used to get a spinlock protecting a target block group.
This reduces its usage and simplifies arguments of some related functions
by directly passing a pointer to the spinlock.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Ryusuke Konishi [Wed, 21 Oct 2015 22:03:54 +0000 (09:03 +1100)]
nilfs2: use nilfs_warning() in allocator implementation
This uses nilfs_warning() to replace "printk(KERN_WARNING ...);" in the
bitmap based allocator implementation of nilfs2. The warning messages are
modified to include the device name and the inode number in each message.
This makes it clear which metadata file of which device has output
warnings such as "entry number xxxx already freed".
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Joe Perches [Wed, 21 Oct 2015 22:03:54 +0000 (09:03 +1100)]
checkpatch: improve tests for fixes:, long lines and stack dumps in commit log
Including BUG and stack dumps in commit logs makes checkpatch produce some
false positive warning messages.
checkpatch has multiple types of false positives:
o Commit message lines > 75 chars
o Stack dump address are mistaken for git commit IDs
o Link: and Fixes: lines are allowed to be > 75 chars.
o Fixes: style doesn't require ("<commit_description>")
parentheses and double quotes like other uses of
git commit ID and description.
Fix these.
Miscellanea:
o Move the test for checking $commit_log_possible_stack_dump
above the test for a long line commit message
o Add test for hex address surrounded by square or angle brackets
Signed-off-by: Joe Perches <joe@perches.com> Reported-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Marian Chereji [Wed, 21 Oct 2015 22:03:54 +0000 (09:03 +1100)]
lib: Add CRC64 ECMA module
Add implementation of CRC64 ECMA checksum.
We have an IP Acceleration driver for Freescale network processors which
is using this CRC64. However, it still needs some work in order for it to
become upstreamable.
Signed-off-by: Marian Chereji <marian.chereji@freescale.com> Reviewed-by: Varvara Andrei-B21317 <andrei.varvara@freescale.com> Reviewed-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
kstrimdup() creates a whitespace-trimmed duplicate of the passed in
null-terminated string. This is useful for strings coming from sysfs that
often include trailing whitespace due to user input.
Thanks to Joe Perches for this implementation.
Signed-off-by: Sebastian Capella <sebastian.capella@linaro.org> Cc: Joe Perches <joe@perches.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cody P Schafer [Wed, 21 Oct 2015 22:03:53 +0000 (09:03 +1100)]
rbtree: clarify documentation of rbtree_postorder_for_each_entry_safe()
I noticed that commit a20135ffbc44 ("writeback: don't drain
bdi_writeback_congested on bdi destruction") added a usage of
rbtree_postorder_for_each_entry_safe() in mm/backing-dev.c which appears
to try to rb_erase() elements from an rbtree while iterating over it using
rbtree_postorder_for_each_entry_safe().
Doing this will cause random nodes to be missed by the iteration because
rb_erase() may rebalance the tree, changing the ordering that we're trying
to iterate over.
The previous documentation for rbtree_postorder_for_each_entry_safe()
wasn't clear that this wasn't allowed, it was taken from the docs for
list_for_each_entry_safe(), where erasing isn't a problem due to
list_del() not reordering.
Explicitly warn developers about this potential pit-fall.
Note that I haven't fixed the actual issue that (it appears) the commit
referenced above introduced (not familiar enough with that code).
In general (and in this case), the patterns to follow are:
- switch to rb_first() + rb_erase(), don't use
rbtree_postorder_for_each_entry_safe().
- keep the postorder iteration and don't rb_erase() at all. Instead
just clear the fields of rb_node & cgwb_congested_tree as required by
other users of those structures.
Signed-off-by: Cody P Schafer <dev@codyps.com> Cc: John de la Garza <john@jjdev.com> Cc: Michel Lespinasse <walken@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Rasmus Villemoes [Wed, 21 Oct 2015 22:03:53 +0000 (09:03 +1100)]
lib/kobject.c: use kvasprintf_const for formatting ->name
Sometimes kobject_set_name_vargs is called with a format string conaining
no %, or a format string of precisely "%s", where the single vararg
happens to point to .rodata. kvasprintf_const detects these cases for us
and returns a copy of that pointer instead of duplicating the string, thus
saving some run-time memory. Otherwise, it falls back to kvasprintf. We
just need to always deallocate ->name using kfree_const.
Unfortunately, the dance we need to do to perform the '/' -> '!'
sanitization makes the resulting code rather ugly.
I instrumented kstrdup_const to provide some statistics on the memory
saved, and for me this gave an additional ~14KB after boot (306KB was
already saved; this patch bumped that to 320KB). I have
KMALLOC_SHIFT_LOW==3, and since 80% of the kvasprintf_const hits were
satisfied by an 8-byte allocation, the 14K would roughly be quadrupled
when KMALLOC_SHIFT_LOW==5. Whether these numbers are sufficient to
justify the ugliness I'll leave to others to decide.
Rasmus Villemoes [Wed, 21 Oct 2015 22:03:52 +0000 (09:03 +1100)]
lib/kasprintf.c: introduce kvasprintf_const
This adds kvasprintf_const which tries to use kstrdup_const if possible:
If the format string contains no % characters, or if the format string is
exactly "%s", we delegate to kstrdup_const. Otherwise, we fall back to
kvasprintf.
Just as for kstrdup_const, the main motivation is to save memory by
reusing .rodata when possible.
The return value should be freed by kfree_const, just like for
kstrdup_const.
There is deliberately no kasprintf_const: In the vast majority of cases,
the format string argument is a literal, so one can determine statically
whether one could instead use kstrdup_const directly (which would also
require one to change all corresponding kfree calls to kfree_const).
Dmitry Vyukov [Wed, 21 Oct 2015 22:03:52 +0000 (09:03 +1100)]
lib/llist.c: fix data race in llist_del_first
llist_del_first reads entry->next, but it did not acquire visibility over
the entry node. As the result it can get a stale value of entry->next
(e.g. NULL or whatever garbage was there before the appending thread
wrote correct value). And then commit that value as llist head with
cmpxchg. That will corrupt llist.
Note there is a control-dependency between read of head->first and read of
entry->next, but it does not make the code correct. Kernel memory model
unambiguously says: "A load-load control dependency requires a full read
memory barrier".
Use smp_load_acquire to acquire visibility over the entry node.
The data race was found with KernelThreadSanitizer (KTSAN).
- Single quotes in pr_warn() to see empty strings [Andy Shevchenko].
- Check for test validity compile-time [Rasmus Villemoes, Andy Shevchenko].
- All __test_string_get_size() arguments are const.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: James Bottomley <JBottomley@Odin.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add a couple of simple tests for string_get_size(). The last one will
hang the kernel without the 'lib/string_helpers.c: fix infinite loop in
string_get_size()' fix.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: James Bottomley <JBottomley@Odin.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
lib/halfmd4.c: use rol32 inline function in the ROUND macro
<linux/bitops.h> provides rol32() inline function, let's use already
predefined function instead of direct expression.
Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Months back, this was discussed, see https://lkml.org/lkml/2015/1/18/289
The result was the 64-bit version being "likely fine", "valuable" and
"correct". The discussion fell asleep but since there are possible users,
let's add it.
Signed-off-by: Martin Kepplinger <martin.kepplinger@theobroma-systems.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: George Spelvin <linux@horizon.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Maxime Coquelin <maxime.coquelin@st.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Yury Norov <yury.norov@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
It is often overlooked that sign_extend32(), despite its name, is safe to
use for 16 and 8 bit types as well. This should help prevent sign
extension being done manually some other way.
Signed-off-by: Martin Kepplinger <martin.kepplinger@theobroma-systems.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: George Spelvin <linux@horizon.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Maxime Coquelin <maxime.coquelin@st.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Yury Norov <yury.norov@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Rasmus Villemoes [Wed, 21 Oct 2015 22:03:51 +0000 (09:03 +1100)]
lib/vsprintf.c: update documentation
%n is no longer just ignored; it results in early return from vsnprintf.
Also add a request to add test cases for future %p extensions.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Martin Kletzander <mkletzan@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Rasmus Villemoes [Wed, 21 Oct 2015 22:03:50 +0000 (09:03 +1100)]
test_printf: test printf family at runtime
This adds a simple module for testing the kernel's printf facilities.
Previously, some %p extensions have caused a wrong return value in case
the entire output didn't fit and/or been unusable in kasprintf(). This
should help catch such issues. Also, it should help ensure that changes
to the formatting algorithms don't break anything.
I'm not sure if we have a struct dentry or struct file lying around at
boot time or if we can fake one, but most %p extensions should be
testable, as should the ordinary number and string formatting.
The nature of vararg functions means we can't use a more conventional
table-driven approach.
For now, this is mostly a skeleton; contributions are very
welcome. Some tests are/will be slightly annoying to write, since the
expected output depends on stuff like CONFIG_*, sizeof(long), runtime
values etc.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Kees Cook <keescook@chromium.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Martin Kletzander <mkletzan@redhat.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
shows, nobody uses the # flag with %p. Should one try to do so, one
will be met with
warning: `#' flag used with `%p' gnu_printf format [-Wformat]
(POSIX and C99 both say "... For other conversion specifiers, the
behavior is undefined.". Obviously, the kernel can choose to define
the behaviour however it wants, but as long as gcc issues that
warning, users are unlikely to show up.)
Since default_width is effectively always 2*sizeof(void*), we can
simplify the prologue of pointer() and save a few instructions.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Martin Kletzander <mkletzan@redhat.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Rasmus Villemoes [Wed, 21 Oct 2015 22:03:50 +0000 (09:03 +1100)]
lib/vsprintf.c: also improve sanity check in bstr_printf()
Quoting from 2aa2f9e21e4e ("lib/vsprintf.c: improve sanity check in
vsnprintf()"):
On 64 bit, size may very well be huge even if bit 31 happens to be 0.
Somehow it doesn't feel right that one can pass a 5 GiB buffer but not a
3 GiB one. So cap at INT_MAX as was probably the intention all along.
This is also the made-up value passed by sprintf and vsprintf.
I should have seen this copy-pasted instance back then, but let's just
do it now.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Martin Kletzander <mkletzan@redhat.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Rasmus Villemoes [Wed, 21 Oct 2015 22:03:50 +0000 (09:03 +1100)]
lib/vsprintf.c: handle invalid format specifiers more robustly
If we meet any invalid or unsupported format specifier, 'handling' it by
just printing it as a literal string is not safe: Presumably the format
string and the arguments passed gcc's type checking, but that means
something like sprintf(buf, "%n %pd", &intvar, dentry) would end up
interpreting &intvar as a struct dentry*.
When the offending specifier was %n it used to be at the end of the format
string, but we can't rely on that always being the case. Also, gcc
doesn't complain about some more or less exotic qualifiers (or 'length
modifiers' in posix-speak) such as 'j' or 'q', but being unrecognized by
the kernel's printf implementation, they'd be interpreted as unknown
specifiers, and the rest of arguments would be interpreted wrongly.
So let's complain about anything we don't understand, not just %n, and
stop pretending that we'd be able to make sense of the rest of the
format/arguments. If the offending specifier is in a printk() call we
unfortunately only get a "BUG: recent printk recursion!", but at least
direct users of the sprintf family will be caught.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Martin Kletzander <mkletzan@redhat.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Martin Kletzander <mkletzan@redhat.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Move all pointer-formatting documentation to one place in the code and one
place in the documentation instead of keeping it in three places with
different level of completeness. Documentation/printk-formats.txt has
detailed information about each modifier, docstring above pointer() has
short descriptions of them (as that is the function dealing with %p) and
docstring above vsprintf() is removed as redundant. Both docstrings in
the code that were modified are updated with a reminder of updating the
documentation upon any further change.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Vasily Kulikov [Wed, 21 Oct 2015 22:03:49 +0000 (09:03 +1100)]
include/linux/poison.h: use POISON_POINTER_DELTA for poison pointers
TIMER_ENTRY_STATIC and TAIL_MAPPING are defined as poison pointers which
should point to nowhere. Redefine them using POISON_POINTER_DELTA
arithmetics to make sure they really point to non-mappable area declared
by the target architecture.
Signed-off-by: Vasily Kulikov <segoon@openwall.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Solar Designer <solar@openwall.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Andy Shevchenko [Wed, 21 Oct 2015 22:03:48 +0000 (09:03 +1100)]
fs/proc/array.c: set overflow flag in case of error
For now in task_name() we ignore the return code of string_escape_str()
call. This is not good if buffer suddenly becomes not big enough. Do the
proper error handling there.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Minchan Kim [Wed, 21 Oct 2015 22:03:48 +0000 (09:03 +1100)]
mm: lru_deactivate_fn should clear PG_referenced
deactivate_page aims for accelerate for reclaiming through
moving pages from active list to inactive list so we should
clear PG_referenced for the goal.
Signed-off-by: Minchan Kim <minchan@kernel.org> Suggested-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Minchan Kim [Wed, 21 Oct 2015 22:03:48 +0000 (09:03 +1100)]
mm: move lazily freed pages to inactive list
MADV_FREE is a hint that it's okay to discard pages if there is memory
pressure and we use reclaimers(ie, kswapd and direct reclaim) to free them
so there is no value keeping them in the active anonymous LRU so this
patch moves them to inactive LRU list's head.
This means that MADV_FREE-ed pages which were living on the inactive list
are reclaimed first because they are more likely to be cold rather than
recently active pages.
An arguable issue for the approach would be whether we should put the page
to the head or tail of the inactive list. I chose head because the kernel
cannot make sure it's really cold or warm for every MADV_FREE usecase but
at least we know it's not *hot*, so landing of inactive head would be a
comprimise for various usecases.
This fixes suboptimal behavior of MADV_FREE when pages living on the
active list will sit there for a long time even under memory pressure
while the inactive list is reclaimed heavily. This basically breaks the
whole purpose of using MADV_FREE to help the system to free memory which
is might not be used.
Signed-off-by: Minchan Kim <minchan@kernel.org> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: Wang, Yalin <Yalin.Wang@sonymobile.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Minchan Kim [Wed, 21 Oct 2015 22:03:48 +0000 (09:03 +1100)]
mm: free swp_entry in madvise_free
When I test below piece of code with 12 processes(ie, 512M * 12 = 6G
consume) on my (3G ram + 12 cpu + 8G swap, the madvise_free is siginficat
slower (ie, 2x times) than madvise_dontneed.
loop = 5;
mmap(512M);
while (loop--) {
memset(512M);
madvise(MADV_FREE or MADV_DONTNEED);
}
If we find hinted pages were already swapped out when syscall is called,
it's pointless to keep the swapped-out pages in pte.
Instead, let's free the cold page because swapin is more expensive
than (alloc page + zeroing).
With this patch, it reduced swapin from 879,585 to 1,878 so elapsed time
Minchan Kim [Wed, 21 Oct 2015 22:03:47 +0000 (09:03 +1100)]
mm: simplify reclaim path for MADV_FREE
I made reclaim path mess to check and free MADV_FREEed page. This patch
simplify it with tweaking add_to_swap.
So far, we mark page as PG_dirty when we add the page into swap cache(ie,
add_to_swap) to page out to swap device but this patch moves PG_dirty
marking under try_to_unmap_one when we decide to change pte from anon to
swapent so if any process's pte has swapent for the page, the page must be
swapped out. IOW, there should be no funcional behavior change. It makes
relcaim path really simple for MADV_FREE because we just need to check
PG_dirty of page to decide discarding the page or not.
Other thing this patch does is to pass TTU_BATCH_FLUSH to try_to_unmap
when we handle freeable page because I don't see any reason to prevent it.
Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Paul Bolle [Wed, 21 Oct 2015 22:03:46 +0000 (09:03 +1100)]
mm: Fix comment typo "CONFIG_TRANSPARNTE_HUGE"
The commit "mm: don't split THP page when syscall is called" added a
reference to CONFIG_TRANSPARNTE_HUGE in a comment. Use
CONFIG_TRANSPARENT_HUGEPAGE instead, as was probably intended.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Acked-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Minchan Kim [Wed, 21 Oct 2015 22:03:46 +0000 (09:03 +1100)]
mm: don't split THP page when MADV_FREE syscall is called
We don't need to split THP page when MADV_FREE syscall is called. It
could be done when VM decide really frees it so we could avoid unnecessary
THP split.
Signed-off-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Minchan Kim [Wed, 21 Oct 2015 22:03:46 +0000 (09:03 +1100)]
mm: mark stable page dirty in KSM
Stable page could be shared by several processes and last process could
own the page among them after CoW or zapping for every process except last
process happens. Then, page table entry of the page in last process can
have no dirty bit and PG_dirty flag in page->flags. In this case,
MADV_FREE could discard the page wrongly. For preventing it, we mark
stable page dirty.
Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Minchan Kim [Wed, 21 Oct 2015 22:03:45 +0000 (09:03 +1100)]
mm: clear PG_dirty to mark page freeable
Basically, MADV_FREE relies on dirty bit in page table entry to decide
whether VM allows to discard the page or not. IOW, if page table entry
includes marked dirty bit, VM shouldn't discard the page.
However, as a example, if swap-in by read fault happens, page table entry
doesn't have dirty bit so MADV_FREE could discard the page wrongly.
For avoiding the problem, MADV_FREE did more checks with PageDirty
and PageSwapCache. It worked out because swapped-in page lives on
swap cache and since it is evicted from the swap cache, the page has
PG_dirty flag. So both page flags check effectively prevent
wrong discarding by MADV_FREE.
However, a problem in above logic is that swapped-in page has
PG_dirty still after they are removed from swap cache so VM cannot
consider the page as freeable any more even if madvise_free is
called in future.
Look at below example for detail.
ptr = malloc();
memset(ptr);
..
..
.. heavy memory pressure so all of pages are swapped out
..
..
var = *ptr; -> a page swapped-in and could be removed from
swapcache. Then, page table doesn't mark
dirty bit and page descriptor includes PG_dirty
..
..
madvise_free(ptr); -> It doesn't clear PG_dirty of the page.
..
..
..
.. heavy memory pressure again.
.. In this time, VM cannot discard the page because the page
.. has *PG_dirty*
To solve the problem, this patch clears PG_dirty if only the page is owned
exclusively by current process when madvise is called because PG_dirty
represents ptes's dirtiness in several processes so we could clear it only
if we own it exclusively.
Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Minchan Kim [Wed, 21 Oct 2015 22:03:45 +0000 (09:03 +1100)]
mm: MADV_FREE trivial clean up
1. Page table waker already pass the vma it is processing
so we don't need to pass vma.
2. If page table entry is dirty in try_to_unmap_one, the dirtiness
should propagate to PG_dirty of the page. So, it's enough to check
only PageDirty without other pte dirty bit checking.
Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Minchan Kim [Wed, 21 Oct 2015 22:03:44 +0000 (09:03 +1100)]
mm: support madvise(MADV_FREE)
Linux doesn't have an ability to free pages lazy while other OS already
have been supported that named by madvise(MADV_FREE).
The gain is clear that kernel can discard freed pages rather than swapping
out or OOM if memory pressure happens.
Without memory pressure, freed pages would be reused by userspace without
another additional overhead(ex, page fault + allocation + zeroing).
Jason Evans said:
: Facebook has been using MAP_UNINITIALIZED
: (https://lkml.org/lkml/2012/1/18/308) in some of its applications for
: several years, but there are operational costs to maintaining this
: out-of-tree in our kernel and in jemalloc, and we are anxious to retire it
: in favor of MADV_FREE. When we first enabled MAP_UNINITIALIZED it
: increased throughput for much of our workload by ~5%, and although the
: benefit has decreased using newer hardware and kernels, there is still
: enough benefit that we cannot reasonably retire it without a replacement.
:
: Aside from Facebook operations, there are numerous broadly used
: applications that would benefit from MADV_FREE. The ones that immediately
: come to mind are redis, varnish, and MariaDB. I don't have much insight
: into Android internals and development process, but I would hope to see
: MADV_FREE support eventually end up there as well to benefit applications
: linked with the integrated jemalloc.
:
: jemalloc will use MADV_FREE once it becomes available in the Linux kernel.
: In fact, jemalloc already uses MADV_FREE or equivalent everywhere it's
: available: *BSD, OS X, Windows, and Solaris -- every platform except Linux
: (and AIX, but I'm not sure it even compiles on AIX). The lack of
: MADV_FREE on Linux forced me down a long series of increasingly
: sophisticated heuristics for madvise() volume reduction, and even so this
: remains a common performance issue for people using jemalloc on Linux.
: Please integrate MADV_FREE; many people will benefit substantially.
How it works:
When madvise syscall is called, VM clears dirty bit of ptes of the range.
If memory pressure happens, VM checks dirty bit of page table and if it
found still "clean", it means it's a "lazyfree pages" so VM could discard
the page instead of swapping out. Once there was store operation for the
page before VM peek a page to reclaim, dirty bit is set so VM can swap out
the page instead of discarding.
Firstly, heavy users would be general allocators(ex, jemalloc, tcmalloc
and hope glibc supports it) and jemalloc/tcmalloc already have supported
the feature for other OS(ex, FreeBSD)
barrios@blaptop:~/benchmark/ebizzy$ lscpu
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
CPU(s): 12
On-line CPU(s) list: 0-11
Thread(s) per core: 1
Core(s) per socket: 1
Socket(s): 12
NUMA node(s): 1
Vendor ID: GenuineIntel
CPU family: 6
Model: 2
Stepping: 3
CPU MHz: 3200.185
BogoMIPS: 6400.53
Virtualization: VT-x
Hypervisor vendor: KVM
Virtualization type: full
L1d cache: 32K
L1i cache: 32K
L2 cache: 4096K
NUMA node0 CPU(s): 0-11
ebizzy benchmark(./ebizzy -S 10 -n 512)
projects / karo-tx-linux.git / log